Commit 2d403f7b authored by Tony Lindgren's avatar Tony Lindgren

ARM: OMAP3: Fix iva2_pwrdm settings for 3703

Commit a819c4f1 (ARM: OMAP3: PM: Only access IVA if one exists)
changed PM to not access IVA registers on omaps that don't have
them. Turns out we still need to idle iva2 as otherwise
iva2_pwrdm will stay on and block deeper idle states.

It seems that the only part of the reset that may not be needed
is the setting of the iva2 boot mode to idle. But as that register
seems to be there and is harmless if no iva2 is on the SoC, it's
probably safest to do the complete reset.
Acked-by: default avatarMark A. Greer <mgreer@animalcreek.com>
Acked-by: default avatarKevin Hilman <khilman@linaro.org>
Tested-by: default avatarYegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: default avatarTony Lindgren <tony@atomide.com>
parent e4aa937e
......@@ -546,7 +546,9 @@ static void __init prcm_setup_regs(void)
/* Clear any pending PRCM interrupts */
omap2_prm_write_mod_reg(0, OCP_MOD, OMAP3_PRM_IRQSTATUS_MPU_OFFSET);
if (omap3_has_iva())
/*
* We need to idle iva2_pwrdm even on am3703 with no iva2.
*/
omap3_iva_idle();
omap3_d2d_idle();
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment