Merge branch 'acpi-messages'

* acpi-messages:
  ACPI: OSL: Clean up printing messages
  ACPI: OSL: Rework acpi_check_resource_conflict()
  ACPI: thermal: Clean up printing messages
  ACPI: video: Clean up printing messages
  ACPI: button: Clean up printing messages
  ACPI: battery: Clean up printing messages
  ACPI: AC: Clean up printing messages
  ACPI: bus: Drop ACPI_BUS_COMPONENT which is not used any more
  ACPI: utils: Clean up printing messages
  ACPI: scan: Clean up printing messages
  ACPI: bus: Clean up printing messages
  ACPI: PM: Clean up printing messages
  ACPI: power: Clean up printing messages

Documentation/firmware-guide/acpi/debug.rst

@@ -52,19 +52,12 @@ shows the supported mask values, currently these::
     ACPI_CA_DISASSEMBLER            0x00000800
     ACPI_COMPILER                   0x00001000
     ACPI_TOOLS                      0x00002000
-    ACPI_BUS_COMPONENT              0x00010000
-    ACPI_AC_COMPONENT               0x00020000
-    ACPI_BATTERY_COMPONENT          0x00040000
-    ACPI_BUTTON_COMPONENT           0x00080000
     ACPI_SBS_COMPONENT              0x00100000
     ACPI_FAN_COMPONENT              0x00200000
     ACPI_PCI_COMPONENT              0x00400000
-    ACPI_POWER_COMPONENT            0x00800000
     ACPI_CONTAINER_COMPONENT        0x01000000
     ACPI_SYSTEM_COMPONENT           0x02000000
-    ACPI_THERMAL_COMPONENT          0x04000000
     ACPI_MEMORY_DEVICE_COMPONENT    0x08000000
-    ACPI_VIDEO_COMPONENT            0x10000000
     ACPI_PROCESSOR_COMPONENT        0x20000000
 
 debug_level
@@ -118,15 +111,15 @@ currently these::
 Examples
 ========
 
-For example, drivers/acpi/bus.c contains this::
+For example, drivers/acpi/acpica/evxfevnt.c contains this::
 
-    #define _COMPONENT              ACPI_BUS_COMPONENT
+    #define _COMPONENT          ACPI_EVENTS
     ...
-    ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Device insertion detected\n"));
+    ACPI_DEBUG_PRINT((ACPI_DB_INIT, "ACPI mode disabled\n"));
 
-To turn on this message, set the ACPI_BUS_COMPONENT bit in acpi.debug_layer
-and the ACPI_LV_INFO bit in acpi.debug_level.  (The ACPI_DEBUG_PRINT
-statement uses ACPI_DB_INFO, which is macro based on the ACPI_LV_INFO
+To turn on this message, set the ACPI_EVENTS bit in acpi.debug_layer
+and the ACPI_LV_INIT bit in acpi.debug_level.  (The ACPI_DEBUG_PRINT
+statement uses ACPI_DB_INIT, which is a macro based on the ACPI_LV_INIT
 definition.)
 
 Enable all AML "Debug" output (stores to the Debug object while interpreting

drivers/acpi/ac.c

@@ -6,6 +6,8 @@
  *  Copyright (C) 2001, 2002 Paul Diefenbaugh <paul.s.diefenbaugh@intel.com>
  */
 
+#define pr_fmt(fmt) "ACPI: AC: " fmt
+
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/slab.h>
@@ -18,8 +20,6 @@
 #include <linux/acpi.h>
 #include <acpi/battery.h>
 
-#define PREFIX "ACPI: "
-
 #define ACPI_AC_CLASS			"ac_adapter"
 #define ACPI_AC_DEVICE_NAME		"AC Adapter"
 #define ACPI_AC_FILE_STATE		"state"
@@ -28,9 +28,6 @@
 #define ACPI_AC_STATUS_ONLINE		0x01
 #define ACPI_AC_STATUS_UNKNOWN		0xFF
 
-#define _COMPONENT		ACPI_AC_COMPONENT
-ACPI_MODULE_NAME("ac");
-
 MODULE_AUTHOR("Paul Diefenbaugh");
 MODULE_DESCRIPTION("ACPI AC Adapter Driver");
 MODULE_LICENSE("GPL");
@@ -102,8 +99,9 @@ static int acpi_ac_get_state(struct acpi_ac *ac)
 	status = acpi_evaluate_integer(ac->device->handle, "_PSR", NULL,
 				       &ac->state);
 	if (ACPI_FAILURE(status)) {
-		ACPI_EXCEPTION((AE_INFO, status,
-				"Error reading AC Adapter state"));
+		acpi_handle_info(ac->device->handle,
+				"Error reading AC Adapter state: %s\n",
+				acpi_format_exception(status));
 		ac->state = ACPI_AC_STATUS_UNKNOWN;
 		return -ENODEV;
 	}
@@ -153,8 +151,8 @@ static void acpi_ac_notify(struct acpi_device *device, u32 event)
 
 	switch (event) {
 	default:
-		ACPI_DEBUG_PRINT((ACPI_DB_INFO,
-				  "Unsupported event [0x%x]\n", event));
+		acpi_handle_debug(device->handle, "Unsupported event [0x%x]\n",
+				  event);
 		fallthrough;
 	case ACPI_AC_NOTIFY_STATUS:
 	case ACPI_NOTIFY_BUS_CHECK:
@@ -278,9 +276,8 @@ static int acpi_ac_add(struct acpi_device *device)
 		goto end;
 	}
 
-	printk(KERN_INFO PREFIX "%s [%s] (%s)\n",
-	       acpi_device_name(device), acpi_device_bid(device),
-	       ac->state ? "on-line" : "off-line");
+	pr_info("%s [%s] (%s)\n", acpi_device_name(device),
+		acpi_device_bid(device), ac->state ? "on-line" : "off-line");
 
 	ac->battery_nb.notifier_call = acpi_ac_battery_notify;
 	register_acpi_notifier(&ac->battery_nb);
@@ -348,7 +345,7 @@ static int __init acpi_ac_init(void)
 		for (i = 0; i < ARRAY_SIZE(acpi_ac_blacklist); i++)
 			if (acpi_dev_present(acpi_ac_blacklist[i].hid, "1",
 					     acpi_ac_blacklist[i].hrv)) {
-				pr_info(PREFIX "AC: found native %s PMIC, not loading\n",
+				pr_info("found native %s PMIC, not loading\n",
 					acpi_ac_blacklist[i].hid);
 				return -ENODEV;
 			}

drivers/acpi/acpi_video.c

@@ -7,6 +7,8 @@
  *  Copyright (C) 2006 Thomas Tuttle <linux-kernel@ttuttle.net>
  */
 
+#define pr_fmt(fmt) "ACPI: video: " fmt
+
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/init.h>
@@ -26,16 +28,11 @@
 #include <acpi/video.h>
 #include <linux/uaccess.h>
 
-#define PREFIX "ACPI: "
-
 #define ACPI_VIDEO_BUS_NAME		"Video Bus"
 #define ACPI_VIDEO_DEVICE_NAME		"Video Device"
 
 #define MAX_NAME_LEN	20
 
-#define _COMPONENT		ACPI_VIDEO_COMPONENT
-ACPI_MODULE_NAME("video");
-
 MODULE_AUTHOR("Bruno Ducrot");
 MODULE_DESCRIPTION("ACPI Video Driver");
 MODULE_LICENSE("GPL");
@@ -326,11 +323,11 @@ acpi_video_device_lcd_query_levels(acpi_handle handle,
 	*levels = NULL;
 
 	status = acpi_evaluate_object(handle, "_BCL", NULL, &buffer);
-	if (!ACPI_SUCCESS(status))
+	if (ACPI_FAILURE(status))
 		return status;
 	obj = (union acpi_object *)buffer.pointer;
 	if (!obj || (obj->type != ACPI_TYPE_PACKAGE)) {
-		printk(KERN_ERR PREFIX "Invalid _BCL data\n");
+		acpi_handle_info(handle, "Invalid _BCL data\n");
 		status = -EFAULT;
 		goto err;
 	}
@@ -354,7 +351,7 @@ acpi_video_device_lcd_set_level(struct acpi_video_device *device, int level)
 	status = acpi_execute_simple_method(device->dev->handle,
 					    "_BCM", level);
 	if (ACPI_FAILURE(status)) {
-		ACPI_ERROR((AE_INFO, "Evaluating _BCM failed"));
+		acpi_handle_info(device->dev->handle, "_BCM evaluation failed\n");
 		return -EIO;
 	}
 
@@ -368,7 +365,7 @@ acpi_video_device_lcd_set_level(struct acpi_video_device *device, int level)
 			return 0;
 		}
 
-	ACPI_ERROR((AE_INFO, "Current brightness invalid"));
+	acpi_handle_info(device->dev->handle, "Current brightness invalid\n");
 	return -EINVAL;
 }
 
@@ -622,9 +619,8 @@ acpi_video_device_lcd_get_level_current(struct acpi_video_device *device,
 			 * BQC returned an invalid level.
 			 * Stop using it.
 			 */
-			ACPI_WARNING((AE_INFO,
-				      "%s returned an invalid level",
-				      buf));
+			acpi_handle_info(device->dev->handle,
+					 "%s returned an invalid level", buf);
 			device->cap._BQC = device->cap._BCQ = 0;
 		} else {
 			/*
@@ -635,7 +631,8 @@ acpi_video_device_lcd_get_level_current(struct acpi_video_device *device,
 			 * ACPI video backlight still works w/ buggy _BQC.
 			 * http://bugzilla.kernel.org/show_bug.cgi?id=12233
 			 */
-			ACPI_WARNING((AE_INFO, "Evaluating %s failed", buf));
+			acpi_handle_info(device->dev->handle,
+					 "%s evaluation failed", buf);
 			device->cap._BQC = device->cap._BCQ = 0;
 		}
 	}
@@ -675,7 +672,7 @@ acpi_video_device_EDID(struct acpi_video_device *device,
 	if (obj && obj->type == ACPI_TYPE_BUFFER)
 		*edid = obj;
 	else {
-		printk(KERN_ERR PREFIX "Invalid _DDC data\n");
+		acpi_handle_info(device->dev->handle, "Invalid _DDC data\n");
 		status = -EFAULT;
 		kfree(obj);
 	}
@@ -827,10 +824,9 @@ int acpi_video_get_levels(struct acpi_device *device,
 	int result = 0;
 	u32 value;
 
-	if (!ACPI_SUCCESS(acpi_video_device_lcd_query_levels(device->handle,
-								&obj))) {
-		ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Could not query available "
-						"LCD brightness level\n"));
+	if (ACPI_FAILURE(acpi_video_device_lcd_query_levels(device->handle, &obj))) {
+		acpi_handle_debug(device->handle,
+				  "Could not query available LCD brightness level\n");
 		result = -ENODEV;
 		goto out;
 	}
@@ -842,7 +838,6 @@ int acpi_video_get_levels(struct acpi_device *device,
 
 	br = kzalloc(sizeof(*br), GFP_KERNEL);
 	if (!br) {
-		printk(KERN_ERR "can't allocate memory\n");
 		result = -ENOMEM;
 		goto out;
 	}
@@ -863,7 +858,7 @@ int acpi_video_get_levels(struct acpi_device *device,
 	for (i = 0; i < obj->package.count; i++) {
 		o = (union acpi_object *)&obj->package.elements[i];
 		if (o->type != ACPI_TYPE_INTEGER) {
-			printk(KERN_ERR PREFIX "Invalid data\n");
+			acpi_handle_info(device->handle, "Invalid data\n");
 			continue;
 		}
 		value = (u32) o->integer.value;
@@ -900,7 +895,8 @@ int acpi_video_get_levels(struct acpi_device *device,
 			br->levels[i] = br->levels[i - level_ac_battery];
 		count += level_ac_battery;
 	} else if (level_ac_battery > ACPI_VIDEO_FIRST_LEVEL)
-		ACPI_ERROR((AE_INFO, "Too many duplicates in _BCL package"));
+		acpi_handle_info(device->handle,
+				 "Too many duplicates in _BCL package");
 
 	/* Check if the _BCL package is in a reversed order */
 	if (max_level == br->levels[ACPI_VIDEO_FIRST_LEVEL]) {
@@ -910,8 +906,8 @@ int acpi_video_get_levels(struct acpi_device *device,
 		     sizeof(br->levels[ACPI_VIDEO_FIRST_LEVEL]),
 		     acpi_video_cmp_level, NULL);
 	} else if (max_level != br->levels[count - 1])
-		ACPI_ERROR((AE_INFO,
-			    "Found unordered _BCL package"));
+		acpi_handle_info(device->handle,
+				 "Found unordered _BCL package");
 
 	br->count = count;
 	*dev_br = br;
@@ -989,9 +985,9 @@ acpi_video_init_brightness(struct acpi_video_device *device)
 	if (result)
 		goto out_free_levels;
 
-	ACPI_DEBUG_PRINT((ACPI_DB_INFO,
-			  "found %d brightness levels\n",
-			  br->count - ACPI_VIDEO_FIRST_LEVEL));
+	acpi_handle_debug(device->dev->handle, "found %d brightness levels\n",
+			  br->count - ACPI_VIDEO_FIRST_LEVEL);
+
 	return 0;
 
 out_free_levels:
@@ -1023,7 +1019,8 @@ static void acpi_video_device_find_cap(struct acpi_video_device *device)
 	if (acpi_has_method(device->dev->handle, "_BQC")) {
 		device->cap._BQC = 1;
 	} else if (acpi_has_method(device->dev->handle, "_BCQ")) {
-		printk(KERN_WARNING FW_BUG "_BCQ is used instead of _BQC\n");
+		acpi_handle_info(device->dev->handle,
+				 "_BCQ is used instead of _BQC\n");
 		device->cap._BCQ = 1;
 	}
 
@@ -1083,8 +1080,7 @@ static int acpi_video_bus_check(struct acpi_video_bus *video)
 	/* Does this device support video switching? */
 	if (video->cap._DOS || video->cap._DOD) {
 		if (!video->cap._DOS) {
-			printk(KERN_WARNING FW_BUG
-				"ACPI(%s) defines _DOD but not _DOS\n",
+			pr_info(FW_BUG "ACPI(%s) defines _DOD but not _DOS\n",
 				acpi_device_bid(video->device));
 		}
 		video->flags.multihead = 1;
@@ -1272,7 +1268,8 @@ acpi_video_device_bind(struct acpi_video_bus *video,
 		ids = &video->attached_array[i];
 		if (device->device_id == (ids->value.int_val & 0xffff)) {
 			ids->bind_info = device;
-			ACPI_DEBUG_PRINT((ACPI_DB_INFO, "device_bind %d\n", i));
+			acpi_handle_debug(video->device->handle, "%s: %d\n",
+					  __func__, i);
 		}
 	}
 }
@@ -1324,20 +1321,22 @@ static int acpi_video_device_enumerate(struct acpi_video_bus *video)
 		return AE_NOT_EXIST;
 
 	status = acpi_evaluate_object(video->device->handle, "_DOD", NULL, &buffer);
-	if (!ACPI_SUCCESS(status)) {
-		ACPI_EXCEPTION((AE_INFO, status, "Evaluating _DOD"));
+	if (ACPI_FAILURE(status)) {
+		acpi_handle_info(video->device->handle,
+				 "_DOD evaluation failed: %s\n",
+				 acpi_format_exception(status));
 		return status;
 	}
 
 	dod = buffer.pointer;
 	if (!dod || (dod->type != ACPI_TYPE_PACKAGE)) {
-		ACPI_EXCEPTION((AE_INFO, status, "Invalid _DOD data"));
+		acpi_handle_info(video->device->handle, "Invalid _DOD data\n");
 		status = -EFAULT;
 		goto out;
 	}
 
-	ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Found %d video heads in _DOD\n",
-			  dod->package.count));
+	acpi_handle_debug(video->device->handle, "Found %d video heads in _DOD\n",
+			  dod->package.count);
 
 	active_list = kcalloc(1 + dod->package.count,
 			      sizeof(struct acpi_video_enumerated_device),
@@ -1352,15 +1351,18 @@ static int acpi_video_device_enumerate(struct acpi_video_bus *video)
 		obj = &dod->package.elements[i];
 
 		if (obj->type != ACPI_TYPE_INTEGER) {
-			printk(KERN_ERR PREFIX
+			acpi_handle_info(video->device->handle,
 					 "Invalid _DOD data in element %d\n", i);
 			continue;
 		}
 
 		active_list[count].value.int_val = obj->integer.value;
 		active_list[count].bind_info = NULL;
-		ACPI_DEBUG_PRINT((ACPI_DB_INFO, "dod element[%d] = %d\n", i,
-				  (int)obj->integer.value));
+
+		acpi_handle_debug(video->device->handle,
+				  "_DOD element[%d] = %d\n", i,
+				  (int)obj->integer.value);
+
 		count++;
 	}
 
@@ -1451,7 +1453,8 @@ acpi_video_switch_brightness(struct work_struct *work)
 
 out:
 	if (result)
-		printk(KERN_ERR PREFIX "Failed to switch the brightness\n");
+		acpi_handle_info(device->dev->handle,
+				 "Failed to switch brightness\n");
 }
 
 int acpi_video_get_edid(struct acpi_device *device, int type, int device_id,
@@ -1601,8 +1604,8 @@ static void acpi_video_bus_notify(struct acpi_device *device, u32 event)
 		break;
 
 	default:
-		ACPI_DEBUG_PRINT((ACPI_DB_INFO,
-				  "Unsupported event [0x%x]\n", event));
+		acpi_handle_debug(device->handle, "Unsupported event [0x%x]\n",
+				  event);
 		break;
 	}
 
@@ -1675,8 +1678,7 @@ static void acpi_video_device_notify(acpi_handle handle, u32 event, void *data)
 		keycode = KEY_DISPLAY_OFF;
 		break;
 	default:
-		ACPI_DEBUG_PRINT((ACPI_DB_INFO,
-				  "Unsupported event [0x%x]\n", event));
+		acpi_handle_debug(handle, "Unsupported event [0x%x]\n", event);
 		break;
 	}
 
@@ -1812,11 +1814,12 @@ static void acpi_video_dev_register_backlight(struct acpi_video_device *device)
 			&device->cooling_dev->device.kobj,
 			"thermal_cooling");
 	if (result)
-		printk(KERN_ERR PREFIX "Create sysfs link\n");
+		pr_info("sysfs link creation failed\n");
+
 	result = sysfs_create_link(&device->cooling_dev->device.kobj,
 			&device->dev->dev.kobj, "device");
 	if (result)
-		printk(KERN_ERR PREFIX "Create sysfs link\n");
+		pr_info("Reverse sysfs link creation failed\n");
 }
 
 static void acpi_video_run_bcl_for_osi(struct acpi_video_bus *video)
@@ -2030,7 +2033,7 @@ static int acpi_video_bus_add(struct acpi_device *device)
 				acpi_video_bus_match, NULL,
 				device, NULL);
 	if (status == AE_ALREADY_EXISTS) {
-		printk(KERN_WARNING FW_BUG
+		pr_info(FW_BUG
 			"Duplicate ACPI video bus devices for the"
 			" same VGA controller, please try module "
 			"parameter \"video.allow_duplicates=1\""
@@ -2073,7 +2076,7 @@ static int acpi_video_bus_add(struct acpi_device *device)
 	if (error)
 		goto err_put_video;
 
-	printk(KERN_INFO PREFIX "%s [%s] (multi-head: %s  rom: %s  post: %s)\n",
+	pr_info("%s [%s] (multi-head: %s  rom: %s  post: %s)\n",
 	       ACPI_VIDEO_DEVICE_NAME, acpi_device_bid(device),
 	       video->flags.multihead ? "yes" : "no",
 	       video->flags.rom ? "yes" : "no",

drivers/acpi/battery.c

@@ -8,7 +8,7 @@
  *  Copyright (C) 2001, 2002 Paul Diefenbaugh <paul.s.diefenbaugh@intel.com>
  */
 
-#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+#define pr_fmt(fmt) "ACPI: battery: " fmt
 
 #include <linux/async.h>
 #include <linux/delay.h>
@@ -29,8 +29,6 @@
 
 #include <acpi/battery.h>
 
-#define PREFIX "ACPI: "
-
 #define ACPI_BATTERY_VALUE_UNKNOWN 0xFFFFFFFF
 #define ACPI_BATTERY_CAPACITY_VALID(capacity) \
 	((capacity) != 0 && (capacity) != ACPI_BATTERY_VALUE_UNKNOWN)
@@ -44,10 +42,6 @@
 #define ACPI_BATTERY_STATE_CHARGING	0x2
 #define ACPI_BATTERY_STATE_CRITICAL	0x4
 
-#define _COMPONENT		ACPI_BATTERY_COMPONENT
-
-ACPI_MODULE_NAME("battery");
-
 MODULE_AUTHOR("Paul Diefenbaugh");
 MODULE_AUTHOR("Alexey Starikovskiy <astarikovskiy@suse.de>");
 MODULE_DESCRIPTION("ACPI Battery Driver");
@@ -466,7 +460,8 @@ static int extract_package(struct acpi_battery *battery,
 static int acpi_battery_get_status(struct acpi_battery *battery)
 {
 	if (acpi_bus_get_status(battery->device)) {
-		ACPI_EXCEPTION((AE_INFO, AE_ERROR, "Evaluating _STA"));
+		acpi_handle_info(battery->device->handle,
+				 "_STA evaluation failed\n");
 		return -ENODEV;
 	}
 	return 0;
@@ -535,8 +530,10 @@ static int acpi_battery_get_info(struct acpi_battery *battery)
 		mutex_unlock(&battery->lock);
 
 		if (ACPI_FAILURE(status)) {
-			ACPI_EXCEPTION((AE_INFO, status, "Evaluating %s",
-					use_bix ? "_BIX":"_BIF"));
+			acpi_handle_info(battery->device->handle,
+					 "%s evaluation failed: %s\n",
+					 use_bix ?"_BIX":"_BIF",
+				         acpi_format_exception(status));
 		} else {
 			result = extract_battery_info(use_bix,
 						      battery,
@@ -573,7 +570,9 @@ static int acpi_battery_get_state(struct acpi_battery *battery)
 	mutex_unlock(&battery->lock);
 
 	if (ACPI_FAILURE(status)) {
-		ACPI_EXCEPTION((AE_INFO, status, "Evaluating _BST"));
+		acpi_handle_info(battery->device->handle,
+				 "_BST evaluation failed: %s",
+				 acpi_format_exception(status));
 		return -ENODEV;
 	}
 
@@ -590,7 +589,7 @@ static int acpi_battery_get_state(struct acpi_battery *battery)
 		battery->rate_now != ACPI_BATTERY_VALUE_UNKNOWN &&
 		(s16)(battery->rate_now) < 0) {
 		battery->rate_now = abs((s16)battery->rate_now);
-		pr_warn_once(FW_BUG "battery: (dis)charge rate invalid.\n");
+		pr_warn_once(FW_BUG "(dis)charge rate invalid.\n");
 	}
 
 	if (test_bit(ACPI_BATTERY_QUIRK_PERCENTAGE_CAPACITY, &battery->flags)
@@ -625,7 +624,9 @@ static int acpi_battery_set_alarm(struct acpi_battery *battery)
 	if (ACPI_FAILURE(status))
 		return -ENODEV;
 
-	ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Alarm set to %d\n", battery->alarm));
+	acpi_handle_debug(battery->device->handle, "Alarm set to %d\n",
+			  battery->alarm);
+
 	return 0;
 }
 
@@ -1201,8 +1202,7 @@ static int acpi_battery_add(struct acpi_device *device)
 	if (result)
 		goto fail;
 
-	pr_info(PREFIX "%s Slot [%s] (battery %s)\n",
-		ACPI_BATTERY_DEVICE_NAME, acpi_device_bid(device),
+	pr_info("Slot [%s] (battery %s)\n", acpi_device_bid(device),
 		device->status.battery_present ? "present" : "absent");
 
 	battery->pm_nb.notifier_call = battery_notify;
@@ -1282,8 +1282,7 @@ static void __init acpi_battery_init_async(void *unused, async_cookie_t cookie)
 	if (battery_check_pmic) {
 		for (i = 0; i < ARRAY_SIZE(acpi_battery_blacklist); i++)
 			if (acpi_dev_present(acpi_battery_blacklist[i], "1", -1)) {
-				pr_info(PREFIX ACPI_BATTERY_DEVICE_NAME
-					": found native %s PMIC, not loading\n",
+				pr_info("found native %s PMIC, not loading\n",
 					acpi_battery_blacklist[i]);
 				return;
 			}

drivers/acpi/bus.c

@@ -5,6 +5,8 @@
  *  Copyright (C) 2001, 2002 Paul Diefenbaugh <paul.s.diefenbaugh@intel.com>
  */
 
+#define pr_fmt(fmt) "ACPI: " fmt
+
 #include <linux/module.h>
 #include <linux/init.h>
 #include <linux/ioport.h>
@@ -31,9 +33,6 @@
 
 #include "internal.h"
 
-#define _COMPONENT		ACPI_BUS_COMPONENT
-ACPI_MODULE_NAME("bus");
-
 struct acpi_device *acpi_root;
 struct proc_dir_entry *acpi_root_dir;
 EXPORT_SYMBOL(acpi_root_dir);
@@ -47,8 +46,7 @@ static inline int set_copy_dsdt(const struct dmi_system_id *id)
 #else
 static int set_copy_dsdt(const struct dmi_system_id *id)
 {
-	printk(KERN_NOTICE "%s detected - "
-		"force copy of DSDT to local memory\n", id->ident);
+	pr_notice("%s detected - force copy of DSDT to local memory\n", id->ident);
 	acpi_gbl_copy_dsdt_locally = 1;
 	return 0;
 }
@@ -116,13 +114,11 @@ int acpi_bus_get_status(struct acpi_device *device)
 	acpi_set_device_status(device, sta);
 
 	if (device->status.functional && !device->status.present) {
-		ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Device [%s] status [%08x]: "
-		       "functional but not present;\n",
-			device->pnp.bus_id, (u32)sta));
+		pr_debug("Device [%s] status [%08x]: functional but not present\n",
+			 device->pnp.bus_id, (u32)sta);
 	}
 
-	ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Device [%s] status [%08x]\n",
-			  device->pnp.bus_id, (u32)sta));
+	pr_debug("Device [%s] status [%08x]\n", device->pnp.bus_id, (u32)sta);
 	return 0;
 }
 EXPORT_SYMBOL(acpi_bus_get_status);
@@ -915,9 +911,9 @@ static int acpi_device_probe(struct device *dev)
 		return ret;
 
 	acpi_dev->driver = acpi_drv;
-	ACPI_DEBUG_PRINT((ACPI_DB_INFO,
-			  "Driver [%s] successfully bound to device [%s]\n",
-			  acpi_drv->name, acpi_dev->pnp.bus_id));
+
+	pr_debug("Driver [%s] successfully bound to device [%s]\n",
+		 acpi_drv->name, acpi_dev->pnp.bus_id);
 
 	if (acpi_drv->ops.notify) {
 		ret = acpi_device_install_notify_handler(acpi_dev);
@@ -931,8 +927,9 @@ static int acpi_device_probe(struct device *dev)
 		}
 	}
 
-	ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Found driver [%s] for device [%s]\n",
-			  acpi_drv->name, acpi_dev->pnp.bus_id));
+	pr_debug("Found driver [%s] for device [%s]\n", acpi_drv->name,
+		 acpi_dev->pnp.bus_id);
+
 	get_device(dev);
 	return 0;
 }
@@ -995,15 +992,15 @@ static int __init acpi_bus_init_irq(void)
 		message = "platform specific model";
 		break;
 	default:
-		printk(KERN_WARNING PREFIX "Unknown interrupt routing model\n");
+		pr_info("Unknown interrupt routing model\n");
 		return -ENODEV;
 	}
 
-	printk(KERN_INFO PREFIX "Using %s for interrupt routing\n", message);
+	pr_info("Using %s for interrupt routing\n", message);
 
 	status = acpi_execute_simple_method(NULL, "\\_PIC", acpi_irq_model);
 	if (ACPI_FAILURE(status) && (status != AE_NOT_FOUND)) {
-		ACPI_EXCEPTION((AE_INFO, status, "Evaluating _PIC"));
+		pr_info("_PIC evaluation failed: %s\n", acpi_format_exception(status));
 		return -ENODEV;
 	}
 
@@ -1027,7 +1024,7 @@ void __init acpi_early_init(void)
 	if (acpi_disabled)
 		return;
 
-	printk(KERN_INFO PREFIX "Core revision %08x\n", ACPI_CA_VERSION);
+	pr_info("Core revision %08x\n", ACPI_CA_VERSION);
 
 	/* enable workarounds, unless strict ACPI spec. compliance */
 	if (!acpi_strict)
@@ -1048,15 +1045,13 @@ void __init acpi_early_init(void)
 
 	status = acpi_reallocate_root_table();
 	if (ACPI_FAILURE(status)) {
-		printk(KERN_ERR PREFIX
-		       "Unable to reallocate ACPI tables\n");
+		pr_err("Unable to reallocate ACPI tables\n");
 		goto error0;
 	}
 
 	status = acpi_initialize_subsystem();
 	if (ACPI_FAILURE(status)) {
-		printk(KERN_ERR PREFIX
-		       "Unable to initialize the ACPI Interpreter\n");
+		pr_err("Unable to initialize the ACPI Interpreter\n");
 		goto error0;
 	}
 
@@ -1102,7 +1097,7 @@ void __init acpi_subsystem_init(void)
 
 	status = acpi_enable_subsystem(~ACPI_NO_ACPI_ENABLE);
 	if (ACPI_FAILURE(status)) {
-		printk(KERN_ERR PREFIX "Unable to enable ACPI\n");
+		pr_err("Unable to enable ACPI\n");
 		disable_acpi();
 	} else {
 		/*
@@ -1131,8 +1126,7 @@ static int __init acpi_bus_init(void)
 
 	status = acpi_load_tables();
 	if (ACPI_FAILURE(status)) {
-		printk(KERN_ERR PREFIX
-		       "Unable to load the System Description Tables\n");
+		pr_err("Unable to load the System Description Tables\n");
 		goto error1;
 	}
 
@@ -1150,14 +1144,13 @@ static int __init acpi_bus_init(void)
 
 	status = acpi_enable_subsystem(ACPI_NO_ACPI_ENABLE);
 	if (ACPI_FAILURE(status)) {
-		printk(KERN_ERR PREFIX
-		       "Unable to start the ACPI Interpreter\n");
+		pr_err("Unable to start the ACPI Interpreter\n");
 		goto error1;
 	}
 
 	status = acpi_initialize_objects(ACPI_FULL_INITIALIZATION);
 	if (ACPI_FAILURE(status)) {
-		printk(KERN_ERR PREFIX "Unable to initialize ACPI objects\n");
+		pr_err("Unable to initialize ACPI objects\n");
 		goto error1;
 	}
 
@@ -1186,7 +1179,7 @@ static int __init acpi_bus_init(void)
 	 */
 	acpi_ec_dsdt_probe();
 
-	printk(KERN_INFO PREFIX "Interpreter enabled\n");
+	pr_info("Interpreter enabled\n");
 
 	/* Initialize sleep structures */
 	acpi_sleep_init();
@@ -1205,8 +1198,7 @@ static int __init acpi_bus_init(void)
 	    acpi_install_notify_handler(ACPI_ROOT_OBJECT, ACPI_SYSTEM_NOTIFY,
 					&acpi_bus_notify, NULL);
 	if (ACPI_FAILURE(status)) {
-		printk(KERN_ERR PREFIX
-		       "Unable to register for device notifications\n");
+		pr_err("Unable to register for system notifications\n");
 		goto error1;
 	}
 
@@ -1233,13 +1225,13 @@ static int __init acpi_init(void)
 	int result;
 
 	if (acpi_disabled) {
-		printk(KERN_INFO PREFIX "Interpreter disabled.\n");
+		pr_info("Interpreter disabled.\n");
 		return -ENODEV;
 	}
 
 	acpi_kobj = kobject_create_and_add("acpi", firmware_kobj);
 	if (!acpi_kobj) {
-		printk(KERN_WARNING "%s: kset create error\n", __func__);
+		pr_debug("%s: kset create error\n", __func__);
 		acpi_kobj = NULL;
 	}
 

drivers/acpi/button.c

@@ -21,8 +21,6 @@
 #include <linux/dmi.h>
 #include <acpi/button.h>
 
-#define PREFIX "ACPI: "
-
 #define ACPI_BUTTON_CLASS		"button"
 #define ACPI_BUTTON_FILE_STATE		"state"
 #define ACPI_BUTTON_TYPE_UNKNOWN	0x00
@@ -54,9 +52,6 @@ static const char * const lid_init_state_str[] = {
 	[ACPI_BUTTON_LID_INIT_DISABLED]		= "disabled",
 };
 
-#define _COMPONENT		ACPI_BUTTON_COMPONENT
-ACPI_MODULE_NAME("button");
-
 MODULE_AUTHOR("Paul Diefenbaugh");
 MODULE_DESCRIPTION("ACPI Button Driver");
 MODULE_LICENSE("GPL");
@@ -285,7 +280,7 @@ static int acpi_button_add_fs(struct acpi_device *device)
 		return 0;
 
 	if (acpi_button_dir || acpi_lid_dir) {
-		printk(KERN_ERR PREFIX "More than one Lid device found!\n");
+		pr_info("More than one Lid device found!\n");
 		return -EEXIST;
 	}
 
@@ -434,8 +429,8 @@ static void acpi_button_notify(struct acpi_device *device, u32 event)
 		}
 		break;
 	default:
-		ACPI_DEBUG_PRINT((ACPI_DB_INFO,
-				  "Unsupported event [0x%x]\n", event));
+		acpi_handle_debug(device->handle, "Unsupported event [0x%x]\n",
+				  event);
 		break;
 	}
 }
@@ -523,7 +518,7 @@ static int acpi_button_add(struct acpi_device *device)
 			ACPI_BUTTON_CLASS, ACPI_BUTTON_SUBCLASS_LID);
 		input->open = acpi_lid_input_open;
 	} else {
-		printk(KERN_ERR PREFIX "Unsupported hid [%s]\n", hid);
+		pr_info("Unsupported hid [%s]\n", hid);
 		error = -ENODEV;
 		goto err_free_input;
 	}
@@ -567,7 +562,7 @@ static int acpi_button_add(struct acpi_device *device)
 	}
 
 	device_init_wakeup(&device->dev, true);
-	printk(KERN_INFO PREFIX "%s [%s]\n", name, acpi_device_bid(device));
+	pr_info("%s [%s]\n", name, acpi_device_bid(device));
 	return 0;
 
  err_remove_fs:

drivers/acpi/device_pm.c

@@ -10,6 +10,8 @@
  * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  */
 
+#define pr_fmt(fmt) "ACPI: PM: " fmt
+
 #include <linux/acpi.h>
 #include <linux/export.h>
 #include <linux/mutex.h>
@@ -20,9 +22,6 @@
 
 #include "internal.h"
 
-#define _COMPONENT	ACPI_POWER_COMPONENT
-ACPI_MODULE_NAME("device_pm");
-
 /**
  * acpi_power_state_string - String representation of ACPI device power state.
  * @state: ACPI device power state to return the string representation of.
@@ -130,8 +129,8 @@ int acpi_device_get_power(struct acpi_device *device, int *state)
 	*state = result;
 
  out:
-	ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Device [%s] power state is %s\n",
-			  device->pnp.bus_id, acpi_power_state_string(*state)));
+	dev_dbg(&device->dev, "Device power state is %s\n",
+		acpi_power_state_string(*state));
 
 	return 0;
 }
@@ -174,9 +173,8 @@ int acpi_device_set_power(struct acpi_device *device, int state)
 
 	/* There is a special case for D0 addressed below. */
 	if (state > ACPI_STATE_D0 && state == device->power.state) {
-		ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Device [%s] already in %s\n",
-				  device->pnp.bus_id,
-				  acpi_power_state_string(state)));
+		dev_dbg(&device->dev, "Device already in %s\n",
+			acpi_power_state_string(state));
 		return 0;
 	}
 
@@ -276,10 +274,8 @@ int acpi_device_set_power(struct acpi_device *device, int state)
 			 acpi_power_state_string(target_state));
 	} else {
 		device->power.state = target_state;
-		ACPI_DEBUG_PRINT((ACPI_DB_INFO,
-				  "Device [%s] transitioned to %s\n",
-				  device->pnp.bus_id,
-				  acpi_power_state_string(target_state)));
+		dev_dbg(&device->dev, "Power state changed to %s\n",
+			acpi_power_state_string(target_state));
 	}
 
 	return result;

drivers/acpi/osl.c

@@ -9,6 +9,8 @@
  *   Author: Matthew Wilcox <willy@linux.intel.com>
  */
 
+#define pr_fmt(fmt) "ACPI: OSL: " fmt
+
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/slab.h>
@@ -37,6 +39,7 @@
 #include "acpica/acnamesp.h"
 #include "internal.h"
 
+/* Definitions for ACPI_DEBUG_PRINT() */
 #define _COMPONENT		ACPI_OS_SERVICES
 ACPI_MODULE_NAME("osl");
 
@@ -327,7 +330,7 @@ void __iomem __ref
 	acpi_size pg_sz;
 
 	if (phys > ULONG_MAX) {
-		printk(KERN_ERR PREFIX "Cannot map memory that high\n");
+		pr_err("Cannot map memory that high: 0x%llx\n", phys);
 		return NULL;
 	}
 
@@ -528,13 +531,12 @@ acpi_os_predefined_override(const struct acpi_predefined_names *init_val,
 
 	*new_val = NULL;
 	if (!memcmp(init_val->name, "_OS_", 4) && strlen(acpi_os_name)) {
-		printk(KERN_INFO PREFIX "Overriding _OS definition to '%s'\n",
-		       acpi_os_name);
+		pr_info("Overriding _OS definition to '%s'\n", acpi_os_name);
 		*new_val = acpi_os_name;
 	}
 
 	if (!memcmp(init_val->name, "_REV", 4) && acpi_rev_override) {
-		printk(KERN_INFO PREFIX "Overriding _REV return value to 5\n");
+		pr_info("Overriding _REV return value to 5\n");
 		*new_val = (char *)5;
 	}
 
@@ -575,15 +577,14 @@ acpi_os_install_interrupt_handler(u32 gsi, acpi_osd_handler handler,
 		return AE_ALREADY_ACQUIRED;
 
 	if (acpi_gsi_to_irq(gsi, &irq) < 0) {
-		printk(KERN_ERR PREFIX "SCI (ACPI GSI %d) not registered\n",
-		       gsi);
+		pr_err("SCI (ACPI GSI %d) not registered\n", gsi);
 		return AE_OK;
 	}
 
 	acpi_irq_handler = handler;
 	acpi_irq_context = context;
 	if (request_irq(irq, acpi_irq, IRQF_SHARED, "acpi", acpi_irq)) {
-		printk(KERN_ERR PREFIX "SCI (IRQ%d) allocation failed\n", irq);
+		pr_err("SCI (IRQ%d) allocation failed\n", irq);
 		acpi_irq_handler = NULL;
 		return AE_NOT_ACQUIRED;
 	}
@@ -1071,7 +1072,7 @@ acpi_status acpi_os_execute(acpi_execute_type type,
 	if (type == OSL_DEBUGGER_MAIN_THREAD) {
 		ret = acpi_debugger_create_thread(function, context);
 		if (ret) {
-			pr_err("Call to kthread_create() failed.\n");
+			pr_err("Kernel thread creation failed\n");
 			status = AE_ERROR;
 		}
 		goto out_thread;
@@ -1121,8 +1122,7 @@ acpi_status acpi_os_execute(acpi_execute_type type,
 	 */
 	ret = queue_work_on(0, queue, &dpc->work);
 	if (!ret) {
-		printk(KERN_ERR PREFIX
-			  "Call to queue_work() failed.\n");
+		pr_err("Unable to queue work\n");
 		status = AE_ERROR;
 	}
 err_workqueue:
@@ -1165,9 +1165,9 @@ acpi_status acpi_hotplug_schedule(struct acpi_device *adev, u32 src)
 {
 	struct acpi_hp_work *hpw;
 
-	ACPI_DEBUG_PRINT((ACPI_DB_EXEC,
-		  "Scheduling hotplug event (%p, %u) for deferred execution.\n",
-		  adev, src));
+	acpi_handle_debug(adev->handle,
+			  "Scheduling hotplug event %u for deferred handling\n",
+			   src);
 
 	hpw = kmalloc(sizeof(*hpw), GFP_KERNEL);
 	if (!hpw)
@@ -1355,7 +1355,7 @@ acpi_status acpi_os_signal(u32 function, void *info)
 {
 	switch (function) {
 	case ACPI_SIGNAL_FATAL:
-		printk(KERN_ERR PREFIX "Fatal opcode executed\n");
+		pr_err("Fatal opcode executed\n");
 		break;
 	case ACPI_SIGNAL_BREAKPOINT:
 		/*
@@ -1407,7 +1407,7 @@ __setup("acpi_os_name=", acpi_os_name_setup);
 static int __init acpi_no_auto_serialize_setup(char *str)
 {
 	acpi_gbl_auto_serialize_methods = FALSE;
-	pr_info("ACPI: auto-serialization disabled\n");
+	pr_info("Auto-serialization disabled\n");
 
 	return 1;
 }
@@ -1458,38 +1458,28 @@ __setup("acpi_enforce_resources=", acpi_enforce_resources_setup);
 int acpi_check_resource_conflict(const struct resource *res)
 {
 	acpi_adr_space_type space_id;
-	acpi_size length;
-	u8 warn = 0;
-	int clash = 0;
 
 	if (acpi_enforce_resources == ENFORCE_RESOURCES_NO)
 		return 0;
-	if (!(res->flags & IORESOURCE_IO) && !(res->flags & IORESOURCE_MEM))
-		return 0;
 
 	if (res->flags & IORESOURCE_IO)
 		space_id = ACPI_ADR_SPACE_SYSTEM_IO;
-	else
+	else if (res->flags & IORESOURCE_MEM)
 		space_id = ACPI_ADR_SPACE_SYSTEM_MEMORY;
+	else
+		return 0;
+
+	if (!acpi_check_address_range(space_id, res->start, resource_size(res), 1))
+		return 0;
 
-	length = resource_size(res);
-	if (acpi_enforce_resources != ENFORCE_RESOURCES_NO)
-		warn = 1;
-	clash = acpi_check_address_range(space_id, res->start, length, warn);
+	pr_info("Resource conflict; ACPI support missing from driver?\n");
 
-	if (clash) {
-		if (acpi_enforce_resources != ENFORCE_RESOURCES_NO) {
-			if (acpi_enforce_resources == ENFORCE_RESOURCES_LAX)
-				printk(KERN_NOTICE "ACPI: This conflict may"
-				       " cause random problems and system"
-				       " instability\n");
-			printk(KERN_INFO "ACPI: If an ACPI driver is available"
-			       " for this device, you should use it instead of"
-			       " the native driver\n");
-		}
 	if (acpi_enforce_resources == ENFORCE_RESOURCES_STRICT)
 		return -EBUSY;
-	}
+
+	if (acpi_enforce_resources == ENFORCE_RESOURCES_LAX)
+		pr_notice("Resource conflict: System may be unstable or behave erratically\n");
+
 	return 0;
 }
 EXPORT_SYMBOL(acpi_check_resource_conflict);
@@ -1722,7 +1712,7 @@ acpi_status acpi_os_release_object(acpi_cache_t * cache, void *object)
 static int __init acpi_no_static_ssdt_setup(char *s)
 {
 	acpi_gbl_disable_ssdt_table_install = TRUE;
-	pr_info("ACPI: static SSDT installation disabled\n");
+	pr_info("Static SSDT installation disabled\n");
 
 	return 0;
 }
@@ -1731,8 +1721,7 @@ early_param("acpi_no_static_ssdt", acpi_no_static_ssdt_setup);
 
 static int __init acpi_disable_return_repair(char *s)
 {
-	printk(KERN_NOTICE PREFIX
-	       "ACPI: Predefined validation mechanism disabled\n");
+	pr_notice("Predefined validation mechanism disabled\n");
 	acpi_gbl_disable_auto_repair = TRUE;
 
 	return 1;
@@ -1758,7 +1747,7 @@ acpi_status __init acpi_os_initialize(void)
 		void *rv;
 
 		rv = acpi_os_map_generic_address(&acpi_gbl_FADT.reset_register);
-		pr_debug(PREFIX "%s: map reset_reg %s\n", __func__,
+		pr_debug("%s: Reset register mapping %s\n", __func__,
 			 rv ? "successful" : "failed");
 	}
 	acpi_os_initialized = true;

drivers/acpi/power.c

@@ -21,6 +21,8 @@
  * may be shared by multiple devices.
  */
 
+#define pr_fmt(fmt) "ACPI: PM: " fmt
+
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/init.h>
@@ -32,8 +34,6 @@
 #include "sleep.h"
 #include "internal.h"
 
-#define _COMPONENT			ACPI_POWER_COMPONENT
-ACPI_MODULE_NAME("power");
 #define ACPI_POWER_CLASS		"power_resource"
 #define ACPI_POWER_DEVICE_NAME		"Power Resource"
 #define ACPI_POWER_RESOURCE_STATE_OFF	0x00
@@ -181,9 +181,6 @@ static int acpi_power_get_state(acpi_handle handle, int *state)
 {
 	acpi_status status = AE_OK;
 	unsigned long long sta = 0;
-	char node_name[5];
-	struct acpi_buffer buffer = { sizeof(node_name), node_name };
-
 
 	if (!handle || !state)
 		return -EINVAL;
@@ -195,11 +192,8 @@ static int acpi_power_get_state(acpi_handle handle, int *state)
 	*state = (sta & 0x01)?ACPI_POWER_RESOURCE_STATE_ON:
 			      ACPI_POWER_RESOURCE_STATE_OFF;
 
-	acpi_get_name(handle, ACPI_SINGLE_NAME, &buffer);
-
-	ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Resource [%s] is %s\n",
-			  node_name,
-				*state ? "on" : "off"));
+	acpi_handle_debug(handle, "Power resource is %s\n",
+			  *state ? "on" : "off");
 
 	return 0;
 }
@@ -229,8 +223,7 @@ static int acpi_power_get_list_state(struct list_head *list, int *state)
 			break;
 	}
 
-	ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Resource list is %s\n",
-			  cur_state ? "on" : "off"));
+	pr_debug("Power resource list is %s\n", cur_state ? "on" : "off");
 
 	*state = cur_state;
 	return 0;
@@ -357,8 +350,7 @@ static int __acpi_power_on(struct acpi_power_resource *resource)
 	if (ACPI_FAILURE(status))
 		return -ENODEV;
 
-	ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Power resource [%s] turned on\n",
-			  resource->name));
+	pr_debug("Power resource [%s] turned on\n", resource->name);
 
 	/*
 	 * If there are other dependents on this power resource we need to
@@ -383,9 +375,7 @@ static int acpi_power_on_unlocked(struct acpi_power_resource *resource)
 	int result = 0;
 
 	if (resource->ref_count++) {
-		ACPI_DEBUG_PRINT((ACPI_DB_INFO,
-				  "Power resource [%s] already on\n",
-				  resource->name));
+		pr_debug("Power resource [%s] already on\n", resource->name);
 	} else {
 		result = __acpi_power_on(resource);
 		if (result)
@@ -413,8 +403,8 @@ static int __acpi_power_off(struct acpi_power_resource *resource)
 	if (ACPI_FAILURE(status))
 		return -ENODEV;
 
-	ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Power resource [%s] turned off\n",
-			  resource->name));
+	pr_debug("Power resource [%s] turned off\n", resource->name);
+
 	return 0;
 }
 
@@ -423,16 +413,12 @@ static int acpi_power_off_unlocked(struct acpi_power_resource *resource)
 	int result = 0;
 
 	if (!resource->ref_count) {
-		ACPI_DEBUG_PRINT((ACPI_DB_INFO,
-				  "Power resource [%s] already off\n",
-				  resource->name));
+		pr_debug("Power resource [%s] already off\n", resource->name);
 		return 0;
 	}
 
 	if (--resource->ref_count) {
-		ACPI_DEBUG_PRINT((ACPI_DB_INFO,
-				  "Power resource [%s] still in use\n",
-				  resource->name));
+		pr_debug("Power resource [%s] still in use\n", resource->name);
 	} else {
 		result = __acpi_power_off(resource);
 		if (result)
@@ -672,7 +658,7 @@ int acpi_device_sleep_wake(struct acpi_device *dev,
 	if (ACPI_SUCCESS(status)) {
 		return 0;
 	} else if (status != AE_NOT_FOUND) {
-		printk(KERN_ERR PREFIX "_DSW execution failed\n");
+		acpi_handle_info(dev->handle, "_DSW execution failed\n");
 		dev->wakeup.flags.valid = 0;
 		return -ENODEV;
 	}
@@ -680,7 +666,7 @@ int acpi_device_sleep_wake(struct acpi_device *dev,
 	/* Execute _PSW */
 	status = acpi_execute_simple_method(dev->handle, "_PSW", enable);
 	if (ACPI_FAILURE(status) && (status != AE_NOT_FOUND)) {
-		printk(KERN_ERR PREFIX "_PSW execution failed\n");
+		acpi_handle_info(dev->handle, "_PSW execution failed\n");
 		dev->wakeup.flags.valid = 0;
 		return -ENODEV;
 	}
@@ -961,7 +947,7 @@ int acpi_add_power_resource(acpi_handle handle)
 	if (result)
 		goto err;
 
-	printk(KERN_INFO PREFIX "%s [%s] (%s)\n", acpi_device_name(device),
+	pr_info("%s [%s] (%s)\n", acpi_device_name(device),
 		acpi_device_bid(device), state ? "on" : "off");
 
 	device->flags.match_driver = true;

drivers/acpi/scan.c

@@ -19,8 +19,6 @@
 
 #include "internal.h"
 
-#define _COMPONENT		ACPI_BUS_COMPONENT
-ACPI_MODULE_NAME("scan");
 extern struct acpi_device *acpi_root;
 
 #define ACPI_BUS_CLASS			"system_bus"
@@ -265,8 +263,7 @@ static int acpi_scan_hot_remove(struct acpi_device *device)
 			return error;
 	}
 
-	ACPI_DEBUG_PRINT((ACPI_DB_INFO,
-		"Hot-removing device %s...\n", dev_name(&device->dev)));
+	acpi_handle_debug(handle, "Ejecting\n");
 
 	acpi_bus_trim(device);
 
@@ -829,7 +826,8 @@ static int acpi_bus_extract_wakeup_device_power_package(struct acpi_device *dev)
 	/* _PRW */
 	status = acpi_evaluate_object(handle, "_PRW", NULL, &buffer);
 	if (ACPI_FAILURE(status)) {
-		ACPI_EXCEPTION((AE_INFO, status, "Evaluating _PRW"));
+		acpi_handle_info(handle, "_PRW evaluation failed: %s\n",
+				 acpi_format_exception(status));
 		return err;
 	}
 
@@ -934,7 +932,7 @@ static void acpi_bus_get_wakeup_device_flags(struct acpi_device *device)
 
 	err = acpi_bus_extract_wakeup_device_power_package(device);
 	if (err) {
-		dev_err(&device->dev, "_PRW evaluation error: %d\n", err);
+		dev_err(&device->dev, "Unable to extract wakeup power resources");
 		return;
 	}
 
@@ -1170,8 +1168,7 @@ acpi_backlight_cap_match(acpi_handle handle, u32 level, void *context,
 
 	if (acpi_has_method(handle, "_BCM") &&
 	    acpi_has_method(handle, "_BCL")) {
-		ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Found generic backlight "
-				  "support\n"));
+		acpi_handle_debug(handle, "Found generic backlight support\n");
 		*cap |= ACPI_VIDEO_BACKLIGHT;
 		/* We have backlight support, no need to scan further */
 		return AE_CTRL_TERMINATE;
@@ -1662,17 +1659,15 @@ static int acpi_add_single_object(struct acpi_device **child,
 				  acpi_handle handle, int type,
 				  unsigned long long sta)
 {
-	int result;
-	struct acpi_device *device;
-	struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL };
 	struct acpi_device_info *info = NULL;
+	struct acpi_device *device;
+	int result;
 
 	if (handle != ACPI_ROOT_OBJECT && type == ACPI_BUS_TYPE_DEVICE)
 		acpi_get_object_info(handle, &info);
 
 	device = kzalloc(sizeof(struct acpi_device), GFP_KERNEL);
 	if (!device) {
-		printk(KERN_ERR PREFIX "Memory allocation error\n");
 		kfree(info);
 		return -ENOMEM;
 	}
@@ -1699,11 +1694,11 @@ static int acpi_add_single_object(struct acpi_device **child,
 
 	acpi_power_add_remove_device(device, true);
 	acpi_device_add_finalize(device);
-	acpi_get_name(handle, ACPI_FULL_PATHNAME, &buffer);
-	ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Added %s [%s] parent %s\n",
-		dev_name(&device->dev), (char *) buffer.pointer,
-		device->parent ? dev_name(&device->parent->dev) : "(null)"));
-	kfree(buffer.pointer);
+
+	acpi_handle_debug(handle, "Added as %s, parent %s\n",
+			  dev_name(&device->dev), device->parent ?
+				dev_name(&device->parent->dev) : "(null)");
+
 	*child = device;
 	return 0;
 }

drivers/acpi/sysfs.c

@@ -52,19 +52,12 @@ static const struct acpi_dlayer acpi_debug_layers[] = {
 	ACPI_DEBUG_INIT(ACPI_COMPILER),
 	ACPI_DEBUG_INIT(ACPI_TOOLS),
 
-	ACPI_DEBUG_INIT(ACPI_BUS_COMPONENT),
-	ACPI_DEBUG_INIT(ACPI_AC_COMPONENT),
-	ACPI_DEBUG_INIT(ACPI_BATTERY_COMPONENT),
-	ACPI_DEBUG_INIT(ACPI_BUTTON_COMPONENT),
 	ACPI_DEBUG_INIT(ACPI_SBS_COMPONENT),
 	ACPI_DEBUG_INIT(ACPI_FAN_COMPONENT),
 	ACPI_DEBUG_INIT(ACPI_PCI_COMPONENT),
-	ACPI_DEBUG_INIT(ACPI_POWER_COMPONENT),
 	ACPI_DEBUG_INIT(ACPI_CONTAINER_COMPONENT),
 	ACPI_DEBUG_INIT(ACPI_SYSTEM_COMPONENT),
-	ACPI_DEBUG_INIT(ACPI_THERMAL_COMPONENT),
 	ACPI_DEBUG_INIT(ACPI_MEMORY_DEVICE_COMPONENT),
-	ACPI_DEBUG_INIT(ACPI_VIDEO_COMPONENT),
 	ACPI_DEBUG_INIT(ACPI_PROCESSOR_COMPONENT),
 };
 

drivers/acpi/thermal.c

@@ -13,6 +13,8 @@
  *          concepts of 'multiple limiters', upper/lower limits, etc.
  */
 
+#define pr_fmt(fmt) "ACPI: thermal: " fmt
+
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/dmi.h>
@@ -29,8 +31,6 @@
 #include <linux/uaccess.h>
 #include <linux/units.h>
 
-#define PREFIX "ACPI: "
-
 #define ACPI_THERMAL_CLASS		"thermal_zone"
 #define ACPI_THERMAL_DEVICE_NAME	"Thermal Zone"
 #define ACPI_THERMAL_NOTIFY_TEMPERATURE	0x80
@@ -43,9 +43,6 @@
 #define ACPI_THERMAL_MAX_ACTIVE	10
 #define ACPI_THERMAL_MAX_LIMIT_STR_LEN 65
 
-#define _COMPONENT		ACPI_THERMAL_COMPONENT
-ACPI_MODULE_NAME("thermal");
-
 MODULE_AUTHOR("Paul Diefenbaugh");
 MODULE_DESCRIPTION("ACPI Thermal Zone Driver");
 MODULE_LICENSE("GPL");
@@ -197,8 +194,9 @@ static int acpi_thermal_get_temperature(struct acpi_thermal *tz)
 		return -ENODEV;
 
 	tz->temperature = tmp;
-	ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Temperature is %lu dK\n",
-			  tz->temperature));
+
+	acpi_handle_debug(tz->device->handle, "Temperature is %lu dK\n",
+			  tz->temperature);
 
 	return 0;
 }
@@ -216,8 +214,8 @@ static int acpi_thermal_get_polling_frequency(struct acpi_thermal *tz)
 		return -ENODEV;
 
 	tz->polling_frequency = tmp;
-	ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Polling frequency is %lu dS\n",
-			  tz->polling_frequency));
+	acpi_handle_debug(tz->device->handle, "Polling frequency is %lu dS\n",
+			  tz->polling_frequency);
 
 	return 0;
 }
@@ -254,12 +252,12 @@ static int acpi_thermal_set_cooling_mode(struct acpi_thermal *tz, int mode)
  * 2.TODO: Devices listed in _PSL, _ALx, _TZD may change.
  *   We need to re-bind the cooling devices of a thermal zone when this occurs.
  */
-#define ACPI_THERMAL_TRIPS_EXCEPTION(flags, str)	\
+#define ACPI_THERMAL_TRIPS_EXCEPTION(flags, tz, str)	\
 do {	\
 	if (flags != ACPI_TRIPS_INIT)	\
-		ACPI_EXCEPTION((AE_INFO, AE_ERROR,	\
+		acpi_handle_info(tz->device->handle,	\
 		"ACPI thermal trip point %s changed\n"	\
-		"Please send acpidump to linux-acpi@vger.kernel.org", str)); \
+		"Please report to linux-acpi@vger.kernel.org\n", str); \
 } while (0)
 
 static int acpi_thermal_trips_update(struct acpi_thermal *tz, int flag)
@@ -283,17 +281,17 @@ static int acpi_thermal_trips_update(struct acpi_thermal *tz, int flag)
 		 */
 		if (ACPI_FAILURE(status)) {
 			tz->trips.critical.flags.valid = 0;
-			ACPI_DEBUG_PRINT((ACPI_DB_INFO,
-					  "No critical threshold\n"));
+			acpi_handle_debug(tz->device->handle,
+					  "No critical threshold\n");
 		} else if (tmp <= 2732) {
-			pr_warn(FW_BUG "Invalid critical threshold (%llu)\n",
+			pr_info(FW_BUG "Invalid critical threshold (%llu)\n",
 				tmp);
 			tz->trips.critical.flags.valid = 0;
 		} else {
 			tz->trips.critical.flags.valid = 1;
-			ACPI_DEBUG_PRINT((ACPI_DB_INFO,
+			acpi_handle_debug(tz->device->handle,
 					  "Found critical threshold [%lu]\n",
-					  tz->trips.critical.temperature));
+					  tz->trips.critical.temperature);
 		}
 		if (tz->trips.critical.flags.valid == 1) {
 			if (crt == -1) {
@@ -305,8 +303,8 @@ static int acpi_thermal_trips_update(struct acpi_thermal *tz, int flag)
 				 * Allow override critical threshold
 				 */
 				if (crt_k > tz->trips.critical.temperature)
-					pr_warn(PREFIX "Critical threshold %d C\n",
-						crt);
+					pr_info("Critical threshold %d C\n", crt);
+
 				tz->trips.critical.temperature = crt_k;
 			}
 		}
@@ -318,14 +316,14 @@ static int acpi_thermal_trips_update(struct acpi_thermal *tz, int flag)
 				"_HOT", NULL, &tmp);
 		if (ACPI_FAILURE(status)) {
 			tz->trips.hot.flags.valid = 0;
-			ACPI_DEBUG_PRINT((ACPI_DB_INFO,
-					"No hot threshold\n"));
+			acpi_handle_debug(tz->device->handle,
+					  "No hot threshold\n");
 		} else {
 			tz->trips.hot.temperature = tmp;
 			tz->trips.hot.flags.valid = 1;
-			ACPI_DEBUG_PRINT((ACPI_DB_INFO,
+			acpi_handle_debug(tz->device->handle,
 					  "Found hot threshold [%lu]\n",
-					tz->trips.hot.temperature));
+					  tz->trips.hot.temperature);
 		}
 	}
 
@@ -378,7 +376,8 @@ static int acpi_thermal_trips_update(struct acpi_thermal *tz, int flag)
 		status = acpi_evaluate_reference(tz->device->handle, "_PSL",
 							NULL, &devices);
 		if (ACPI_FAILURE(status)) {
-			pr_warn(PREFIX "Invalid passive threshold\n");
+			acpi_handle_info(tz->device->handle,
+					 "Invalid passive threshold\n");
 			tz->trips.passive.flags.valid = 0;
 		}
 		else
@@ -388,12 +387,12 @@ static int acpi_thermal_trips_update(struct acpi_thermal *tz, int flag)
 				sizeof(struct acpi_handle_list))) {
 			memcpy(&tz->trips.passive.devices, &devices,
 				sizeof(struct acpi_handle_list));
-			ACPI_THERMAL_TRIPS_EXCEPTION(flag, "device");
+			ACPI_THERMAL_TRIPS_EXCEPTION(flag, tz, "device");
 		}
 	}
 	if ((flag & ACPI_TRIPS_PASSIVE) || (flag & ACPI_TRIPS_DEVICES)) {
 		if (valid != tz->trips.passive.flags.valid)
-				ACPI_THERMAL_TRIPS_EXCEPTION(flag, "state");
+				ACPI_THERMAL_TRIPS_EXCEPTION(flag, tz, "state");
 	}
 
 	/* Active (optional) */
@@ -440,8 +439,8 @@ static int acpi_thermal_trips_update(struct acpi_thermal *tz, int flag)
 			status = acpi_evaluate_reference(tz->device->handle,
 						name, NULL, &devices);
 			if (ACPI_FAILURE(status)) {
-				pr_warn(PREFIX "Invalid active%d threshold\n",
-					i);
+				acpi_handle_info(tz->device->handle,
+						 "Invalid active%d threshold\n", i);
 				tz->trips.active[i].flags.valid = 0;
 			}
 			else
@@ -451,12 +450,12 @@ static int acpi_thermal_trips_update(struct acpi_thermal *tz, int flag)
 					sizeof(struct acpi_handle_list))) {
 				memcpy(&tz->trips.active[i].devices, &devices,
 					sizeof(struct acpi_handle_list));
-				ACPI_THERMAL_TRIPS_EXCEPTION(flag, "device");
+				ACPI_THERMAL_TRIPS_EXCEPTION(flag, tz, "device");
 			}
 		}
 		if ((flag & ACPI_TRIPS_ACTIVE) || (flag & ACPI_TRIPS_DEVICES))
 			if (valid != tz->trips.active[i].flags.valid)
-				ACPI_THERMAL_TRIPS_EXCEPTION(flag, "state");
+				ACPI_THERMAL_TRIPS_EXCEPTION(flag, tz, "state");
 
 		if (!tz->trips.active[i].flags.valid)
 			break;
@@ -469,7 +468,7 @@ static int acpi_thermal_trips_update(struct acpi_thermal *tz, int flag)
 		if (ACPI_SUCCESS(status)
 		    && memcmp(&tz->devices, &devices, sizeof(devices))) {
 			tz->devices = devices;
-			ACPI_THERMAL_TRIPS_EXCEPTION(flag, "device");
+			ACPI_THERMAL_TRIPS_EXCEPTION(flag, tz, "device");
 		}
 	}
 
@@ -925,8 +924,8 @@ static void acpi_thermal_notify(struct acpi_device *device, u32 event)
 						  dev_name(&device->dev), event, 0);
 		break;
 	default:
-		ACPI_DEBUG_PRINT((ACPI_DB_INFO,
-				  "Unsupported event [0x%x]\n", event));
+		acpi_handle_debug(device->handle, "Unsupported event [0x%x]\n",
+				  event);
 		break;
 	}
 }
@@ -1074,7 +1073,7 @@ static int acpi_thermal_add(struct acpi_device *device)
 	mutex_init(&tz->thermal_check_lock);
 	INIT_WORK(&tz->thermal_check_work, acpi_thermal_check_fn);
 
-	pr_info(PREFIX "%s [%s] (%ld C)\n", acpi_device_name(device),
+	pr_info("%s [%s] (%ld C)\n", acpi_device_name(device),
 		acpi_device_bid(device), deci_kelvin_to_celsius(tz->temperature));
 	goto end;
 
@@ -1146,24 +1145,24 @@ static int acpi_thermal_resume(struct device *dev)
 static int thermal_act(const struct dmi_system_id *d) {
 
 	if (act == 0) {
-		pr_notice(PREFIX "%s detected: "
-			  "disabling all active thermal trip points\n", d->ident);
+		pr_notice("%s detected: disabling all active thermal trip points\n",
+			  d->ident);
 		act = -1;
 	}
 	return 0;
 }
 static int thermal_nocrt(const struct dmi_system_id *d) {
 
-	pr_notice(PREFIX "%s detected: "
-		  "disabling all critical thermal trip point actions.\n", d->ident);
+	pr_notice("%s detected: disabling all critical thermal trip point actions.\n",
+		  d->ident);
 	nocrt = 1;
 	return 0;
 }
 static int thermal_tzp(const struct dmi_system_id *d) {
 
 	if (tzp == 0) {
-		pr_notice(PREFIX "%s detected: "
-			  "enabling thermal zone polling\n", d->ident);
+		pr_notice("%s detected: enabling thermal zone polling\n",
+			  d->ident);
 		tzp = 300;	/* 300 dS = 30 Seconds */
 	}
 	return 0;
@@ -1171,8 +1170,8 @@ static int thermal_tzp(const struct dmi_system_id *d) {
 static int thermal_psv(const struct dmi_system_id *d) {
 
 	if (psv == 0) {
-		pr_notice(PREFIX "%s detected: "
-			  "disabling all passive thermal trip points\n", d->ident);
+		pr_notice("%s detected: disabling all passive thermal trip points\n",
+			  d->ident);
 		psv = -1;
 	}
 	return 0;
@@ -1225,7 +1224,7 @@ static int __init acpi_thermal_init(void)
 	dmi_check_system(thermal_dmi_table);
 
 	if (off) {
-		pr_notice(PREFIX "thermal control disabled\n");
+		pr_notice("thermal control disabled\n");
 		return -ENODEV;
 	}
 

drivers/acpi/utils.c

@@ -6,6 +6,8 @@
  *  Copyright (C) 2001, 2002 Paul Diefenbaugh <paul.s.diefenbaugh@intel.com>
  */
 
+#define pr_fmt(fmt) "ACPI: utils: " fmt
+
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/slab.h>
@@ -18,24 +20,12 @@
 #include "internal.h"
 #include "sleep.h"
 
-#define _COMPONENT		ACPI_BUS_COMPONENT
-ACPI_MODULE_NAME("utils");
-
 /* --------------------------------------------------------------------------
                             Object Evaluation Helpers
    -------------------------------------------------------------------------- */
-static void
-acpi_util_eval_error(acpi_handle h, acpi_string p, acpi_status s)
+static void acpi_util_eval_error(acpi_handle h, acpi_string p, acpi_status s)
 {
-#ifdef ACPI_DEBUG_OUTPUT
-	char prefix[80] = {'\0'};
-	struct acpi_buffer buffer = {sizeof(prefix), prefix};
-	acpi_get_name(h, ACPI_FULL_PATHNAME, &buffer);
-	ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Evaluate [%s.%s]: %s\n",
-		(char *) prefix, p, acpi_format_exception(s)));
-#else
-	return;
-#endif
+	acpi_handle_debug(h, "Evaluate [%s]: %s\n", p, acpi_format_exception(s));
 }
 
 acpi_status
@@ -53,24 +43,23 @@ acpi_extract_package(union acpi_object *package,
 
 	if (!package || (package->type != ACPI_TYPE_PACKAGE)
 	    || (package->package.count < 1)) {
-		printk(KERN_WARNING PREFIX "Invalid package argument\n");
+		pr_debug("Invalid package argument\n");
 		return AE_BAD_PARAMETER;
 	}
 
 	if (!format || !format->pointer || (format->length < 1)) {
-		printk(KERN_WARNING PREFIX "Invalid format argument\n");
+		pr_debug("Invalid format argument\n");
 		return AE_BAD_PARAMETER;
 	}
 
 	if (!buffer) {
-		printk(KERN_WARNING PREFIX "Invalid buffer argument\n");
+		pr_debug("Invalid buffer argument\n");
 		return AE_BAD_PARAMETER;
 	}
 
 	format_count = (format->length / sizeof(char)) - 1;
 	if (format_count > package->package.count) {
-		printk(KERN_WARNING PREFIX "Format specifies more objects [%d]"
-			      " than exist in package [%d].\n",
+		pr_debug("Format specifies more objects [%d] than present [%d]\n",
 			 format_count, package->package.count);
 		return AE_BAD_DATA;
 	}
@@ -99,9 +88,7 @@ acpi_extract_package(union acpi_object *package,
 				tail_offset += sizeof(char *);
 				break;
 			default:
-				printk(KERN_WARNING PREFIX "Invalid package element"
-					      " [%d]: got number, expecting"
-					      " [%c]\n",
+				pr_debug("Invalid package element [%d]: got number, expected [%c]\n",
 					 i, format_string[i]);
 				return AE_BAD_DATA;
 			}
@@ -123,9 +110,7 @@ acpi_extract_package(union acpi_object *package,
 				tail_offset += sizeof(u8 *);
 				break;
 			default:
-				printk(KERN_WARNING PREFIX "Invalid package element"
-					      " [%d] got string/buffer,"
-					      " expecting [%c]\n",
+				pr_debug("Invalid package element [%d] got string/buffer, expected [%c]\n",
 					 i, format_string[i]);
 				return AE_BAD_DATA;
 			}
@@ -137,9 +122,7 @@ acpi_extract_package(union acpi_object *package,
 				tail_offset += sizeof(void *);
 				break;
 			default:
-				printk(KERN_WARNING PREFIX "Invalid package element"
-					      " [%d] got reference,"
-					      " expecting [%c]\n",
+				pr_debug("Invalid package element [%d] got reference, expected [%c]\n",
 					 i, format_string[i]);
 				return AE_BAD_DATA;
 			}
@@ -147,9 +130,7 @@ acpi_extract_package(union acpi_object *package,
 
 		case ACPI_TYPE_PACKAGE:
 		default:
-			ACPI_DEBUG_PRINT((ACPI_DB_INFO,
-					  "Found unsupported element at index=%d\n",
-					  i));
+			pr_debug("Unsupported element at index=%d\n", i);
 			/* TBD: handle nested packages... */
 			return AE_SUPPORT;
 		}
@@ -289,7 +270,7 @@ acpi_evaluate_integer(acpi_handle handle,
 
 	*data = element.integer.value;
 
-	ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Return value [%llu]\n", *data));
+	acpi_handle_debug(handle, "Return value [%llu]\n", *data);
 
 	return AE_OK;
 }
@@ -363,8 +344,7 @@ acpi_evaluate_reference(acpi_handle handle,
 		/* Get the  acpi_handle. */
 
 		list->handles[i] = element->reference.handle;
-		ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Found reference [%p]\n",
-				  list->handles[i]));
+		acpi_handle_debug(list->handles[i], "Found in reference list\n");
 	}
 
       end:

include/acpi/acpi_drivers.h

@@ -15,19 +15,12 @@
  * Please update drivers/acpi/debug.c and Documentation/firmware-guide/acpi/debug.rst
  * if you add to this list.
  */
-#define ACPI_BUS_COMPONENT		0x00010000
-#define ACPI_AC_COMPONENT		0x00020000
-#define ACPI_BATTERY_COMPONENT		0x00040000
-#define ACPI_BUTTON_COMPONENT		0x00080000
 #define ACPI_SBS_COMPONENT		0x00100000
 #define ACPI_FAN_COMPONENT		0x00200000
 #define ACPI_PCI_COMPONENT		0x00400000
-#define ACPI_POWER_COMPONENT		0x00800000
 #define ACPI_CONTAINER_COMPONENT	0x01000000
 #define ACPI_SYSTEM_COMPONENT		0x02000000
-#define ACPI_THERMAL_COMPONENT		0x04000000
 #define ACPI_MEMORY_DEVICE_COMPONENT	0x08000000
-#define ACPI_VIDEO_COMPONENT		0x10000000
 #define ACPI_PROCESSOR_COMPONENT	0x20000000
 
 /*