Commit 2d6ad41b authored by Christoph Hellwig's avatar Christoph Hellwig Committed by Michael Ellerman

powerpc/powernv: use the generic iommu bypass code

Use the generic iommu bypass code instead of overriding set_dma_mask.
Signed-off-by: default avatarChristoph Hellwig <hch@lst.de>
Signed-off-by: default avatarMichael Ellerman <mpe@ellerman.id.au>
parent 6248ac94
......@@ -1825,29 +1825,24 @@ static int pnv_pci_ioda_dma_64bit_bypass(struct pnv_ioda_pe *pe)
return -EIO;
}
static int pnv_pci_ioda_dma_set_mask(struct pci_dev *pdev, u64 dma_mask)
static bool pnv_pci_ioda_iommu_bypass_supported(struct pci_dev *pdev,
u64 dma_mask)
{
struct pci_controller *hose = pci_bus_to_host(pdev->bus);
struct pnv_phb *phb = hose->private_data;
struct pci_dn *pdn = pci_get_pdn(pdev);
struct pnv_ioda_pe *pe;
uint64_t top;
bool bypass = false;
s64 rc;
if (WARN_ON(!pdn || pdn->pe_number == IODA_INVALID_PE))
return -ENODEV;
pe = &phb->ioda.pe_array[pdn->pe_number];
if (pe->tce_bypass_enabled) {
top = pe->tce_bypass_base + memblock_end_of_DRAM() - 1;
bypass = (dma_mask >= top);
u64 top = pe->tce_bypass_base + memblock_end_of_DRAM() - 1;
if (dma_mask >= top)
return true;
}
if (bypass) {
dev_info(&pdev->dev, "Using 64-bit DMA iommu bypass\n");
set_dma_ops(&pdev->dev, &dma_nommu_ops);
} else {
/*
* If the device can't set the TCE bypass bit but still wants
* to access 4GB or more, on PHB3 we can reconfigure TVE#0 to
......@@ -1860,54 +1855,15 @@ static int pnv_pci_ioda_dma_set_mask(struct pci_dev *pdev, u64 dma_mask)
(pe->device_count == 1 || !pe->pbus) &&
phb->model == PNV_PHB_MODEL_PHB3) {
/* Configure the bypass mode */
rc = pnv_pci_ioda_dma_64bit_bypass(pe);
s64 rc = pnv_pci_ioda_dma_64bit_bypass(pe);
if (rc)
return rc;
/* 4GB offset bypasses 32-bit space */
set_dma_offset(&pdev->dev, (1ULL << 32));
set_dma_ops(&pdev->dev, &dma_nommu_ops);
} else if (dma_mask >> 32 && dma_mask != DMA_BIT_MASK(64)) {
/*
* Fail the request if a DMA mask between 32 and 64 bits
* was requested but couldn't be fulfilled. Ideally we
* would do this for 64-bits but historically we have
* always fallen back to 32-bits.
*/
return -ENOMEM;
} else {
dev_info(&pdev->dev, "Using 32-bit DMA via iommu\n");
set_dma_ops(&pdev->dev, &dma_iommu_ops);
}
return true;
}
*pdev->dev.dma_mask = dma_mask;
/* Update peer npu devices */
pnv_npu_try_dma_set_bypass(pdev, bypass);
return 0;
}
static u64 pnv_pci_ioda_dma_get_required_mask(struct pci_dev *pdev)
{
struct pci_controller *hose = pci_bus_to_host(pdev->bus);
struct pnv_phb *phb = hose->private_data;
struct pci_dn *pdn = pci_get_pdn(pdev);
struct pnv_ioda_pe *pe;
u64 end, mask;
if (WARN_ON(!pdn || pdn->pe_number == IODA_INVALID_PE))
return 0;
pe = &phb->ioda.pe_array[pdn->pe_number];
if (!pe->tce_bypass_enabled)
return __dma_get_required_mask(&pdev->dev);
end = pe->tce_bypass_base + memblock_end_of_DRAM();
mask = 1ULL << (fls64(end) - 1);
mask += mask - 1;
return mask;
return false;
}
static void pnv_ioda_setup_bus_dma(struct pnv_ioda_pe *pe, struct pci_bus *bus)
......@@ -3634,6 +3590,7 @@ static void pnv_pci_ioda_shutdown(struct pci_controller *hose)
static const struct pci_controller_ops pnv_pci_ioda_controller_ops = {
.dma_dev_setup = pnv_pci_dma_dev_setup,
.dma_bus_setup = pnv_pci_dma_bus_setup,
.iommu_bypass_supported = pnv_pci_ioda_iommu_bypass_supported,
.setup_msi_irqs = pnv_setup_msi_irqs,
.teardown_msi_irqs = pnv_teardown_msi_irqs,
.enable_device_hook = pnv_pci_enable_device_hook,
......@@ -3641,8 +3598,6 @@ static const struct pci_controller_ops pnv_pci_ioda_controller_ops = {
.window_alignment = pnv_pci_window_alignment,
.setup_bridge = pnv_pci_setup_bridge,
.reset_secondary_bus = pnv_pci_reset_secondary_bus,
.dma_set_mask = pnv_pci_ioda_dma_set_mask,
.dma_get_required_mask = pnv_pci_ioda_dma_get_required_mask,
.shutdown = pnv_pci_ioda_shutdown,
};
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment