Commit 2d7a548a authored by Jaghathiswari Rankappagounder Natarajan's avatar Jaghathiswari Rankappagounder Natarajan Committed by Guenter Roeck

drivers: hwmon: Support for ASPEED PWM/Fan tach

The ASPEED AST2400/2500 PWM controller supports 8 PWM output ports.
The ASPEED AST2400/2500 Fan tach controller supports 16 tachometer
inputs.
The device driver matches on the device tree node. The configuration
values are read from the device tree and written to the respective
registers.
The driver provides a sysfs entries through which the user can
configure the duty-cycle value (ranging from 0 to 100 percent) and read
the fan tach rpm value.
Signed-off-by: default avatarJaghathiswari Rankappagounder Natarajan <jaghu@google.com>
Signed-off-by: default avatarGuenter Roeck <linux@roeck-us.net>
parent d702b353
Kernel driver aspeed-pwm-tacho
==============================
Supported chips:
ASPEED AST2400/2500
Authors:
<jaghu@google.com>
Description:
------------
This driver implements support for ASPEED AST2400/2500 PWM and Fan Tacho
controller. The PWM controller supports upto 8 PWM outputs. The Fan tacho
controller supports up to 16 tachometer inputs.
The driver provides the following sensor accesses in sysfs:
fanX_input ro provide current fan rotation value in RPM as reported
by the fan to the device.
pwmX rw get or set PWM fan control value. This is an integer
value between 0(off) and 255(full speed).
...@@ -341,6 +341,15 @@ config SENSORS_ASB100 ...@@ -341,6 +341,15 @@ config SENSORS_ASB100
This driver can also be built as a module. If so, the module This driver can also be built as a module. If so, the module
will be called asb100. will be called asb100.
config SENSORS_ASPEED
tristate "ASPEED AST2400/AST2500 PWM and Fan tach driver"
help
This driver provides support for ASPEED AST2400/AST2500 PWM
and Fan Tacho controllers.
This driver can also be built as a module. If so, the module
will be called aspeed_pwm_tacho.
config SENSORS_ATXP1 config SENSORS_ATXP1
tristate "Attansic ATXP1 VID controller" tristate "Attansic ATXP1 VID controller"
depends on I2C depends on I2C
......
...@@ -46,6 +46,7 @@ obj-$(CONFIG_SENSORS_ADT7475) += adt7475.o ...@@ -46,6 +46,7 @@ obj-$(CONFIG_SENSORS_ADT7475) += adt7475.o
obj-$(CONFIG_SENSORS_APPLESMC) += applesmc.o obj-$(CONFIG_SENSORS_APPLESMC) += applesmc.o
obj-$(CONFIG_SENSORS_ARM_SCPI) += scpi-hwmon.o obj-$(CONFIG_SENSORS_ARM_SCPI) += scpi-hwmon.o
obj-$(CONFIG_SENSORS_ASC7621) += asc7621.o obj-$(CONFIG_SENSORS_ASC7621) += asc7621.o
obj-$(CONFIG_SENSORS_ASPEED) += aspeed-pwm-tacho.o
obj-$(CONFIG_SENSORS_ATXP1) += atxp1.o obj-$(CONFIG_SENSORS_ATXP1) += atxp1.o
obj-$(CONFIG_SENSORS_CORETEMP) += coretemp.o obj-$(CONFIG_SENSORS_CORETEMP) += coretemp.o
obj-$(CONFIG_SENSORS_DA9052_ADC)+= da9052-hwmon.o obj-$(CONFIG_SENSORS_DA9052_ADC)+= da9052-hwmon.o
......
This diff is collapsed.
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment