Merge new tg3 version 0.96 gigabit ethernet driver.

Documentation/networking/driver.txt

+Documents about softnet driver issues in general can be found
+at:
+
+	http://www.firstfloor.org/~andi/softnet/
+
+Transmit path guidelines:
+
+1) The hard_start_xmit method must never return '1' under any
+   normal circumstances.  It is considered a hard error unless
+   there is no way your device can tell ahead of time when it's
+   transmit function will become busy.
+
+   Instead it must maintain the queue properly.  For example,
+   for a driver implementing scatter-gather this means:
+
+	static int drv_hard_start_xmit(struct sk_buff *skb,
+		   		       struct net_device *dev)
+	{
+		struct drv *dp = dev->priv;
+
+		lock_tx(dp);
+		...
+		/* This is a hard error log it. */
+		if (TX_BUFFS_AVAIL(dp) <= (skb_shinfo(skb)->nr_frags + 1)) {
+			netif_stop_queue(dev);
+			unlock_tx(dp);
+			printk(KERN_ERR PFX "%s: BUG! Tx Ring full when queue awake!\n",
+			       dev->name);
+			return 1;
+		}
+
+		... queue packet to card ...
+		... update tx consumer index ...
+
+		if (TX_BUFFS_AVAIL(dp) <= (MAX_SKB_FRAGS + 1))
+			netif_stop_queue(dev);
+
+		...
+		unlock_tx(dp);
+		...
+	}
+
+   And then at the end of your TX reclaimation event handling:
+
+	if (netif_queue_stopped(dp->dev) &&
+            TX_BUFFS_AVAIL(dp) > (MAX_SKB_FRAGS + 1))
+		netif_wake_queue(dp->dev);
+
+   For a non-scatter-gather supporting card, the three tests simply become:
+
+		/* This is a hard error log it. */
+		if (TX_BUFFS_AVAIL(dp) <= 0)
+
+   and:
+
+		if (TX_BUFFS_AVAIL(dp) == 0)
+
+   and:
+
+	if (netif_queue_stopped(dp->dev) &&
+            TX_BUFFS_AVAIL(dp) > 0)
+		netif_wake_queue(dp->dev);
+
+2) Do not forget to update netdev->trans_start to jiffies after
+   each new tx packet is given to the hardware.
+
+3) Do not forget that once you return 0 from your hard_start_xmit
+   method, it is your driver's responsibility to free up the SKB
+   and in some finite amount of time.
+
+   For example, this means that it is not allowed for your TX
+   mitigation scheme to let TX packets "hang out" in the TX
+   ring unreclaimed forever if no new TX packets are sent.
+   This error can deadlock sockets waiting for send buffer room
+   to be freed up.
+
+   If you return 1 from the hard_start_xmit method, you must not keep
+   any reference to that SKB and you must not attempt to free it up.
+
+Probing guidelines:
+
+1) Any hardware layer address you obtain for your device should
+   be verified.  For example, for ethernet check it with
+   linux/etherdevice.h:is_valid_ether_addr()

drivers/net/Config.help

@@ -797,6 +797,14 @@ CONFIG_SUNGEM
   Support for the Sun GEM chip, aka Sun GigabitEthernet/P 2.0.  See also
   <http://www.sun.com/products-n-solutions/hardware/docs/pdf/806-3985-10.pdf>.
 
+CONFIG_TIGON3
+  This driver supports Broadcom Tigon3 based gigabit Ethernet cards.
+
+  If you want to compile this driver as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want),
+  say M here and read <file:Documentation/modules.txt>.  This is
+  recommended.  The module will be called tg3.o.
+
 CONFIG_MYRI_SBUS
   This driver supports MyriCOM Sbus gigabit Ethernet cards.
 

drivers/net/Config.in

@@ -237,6 +237,7 @@ dep_tristate 'National Semiconduct DP83820 support' CONFIG_NS83820 $CONFIG_PCI
 dep_tristate 'Packet Engines Hamachi GNIC-II support' CONFIG_HAMACHI $CONFIG_PCI
 dep_tristate 'Packet Engines Yellowfin Gigabit-NIC support (EXPERIMENTAL)' CONFIG_YELLOWFIN $CONFIG_PCI $CONFIG_EXPERIMENTAL
 dep_tristate 'SysKonnect SK-98xx support' CONFIG_SK98LIN $CONFIG_PCI
+dep_tristate 'Broadcom Tigon3 support' CONFIG_TIGON3 $CONFIG_PCI
 
 endmenu
 

drivers/net/Makefile

@@ -82,6 +82,7 @@ obj-$(CONFIG_NATSEMI) += natsemi.o
 obj-$(CONFIG_NS83820) += ns83820.o
 obj-$(CONFIG_STNIC) += stnic.o 8390.o
 obj-$(CONFIG_FEALNX) += fealnx.o mii.o
+obj-$(CONFIG_TIGON3) += tg3.o
 
 ifeq ($(CONFIG_SK98LIN),y)
 obj-y += sk98lin/sk98lin.o

drivers/pci/pci.ids

@@ -4183,12 +4183,18 @@
 14e3  AMTELCO
 14e4  BROADCOM Corporation
 	1644  NetXtreme BCM5700 Gigabit Ethernet
+		1014 0277  Broadcom Vigil B5700 1000Base-T
+		1028 00d1  Broadcom BCM5700
+		1028 0106  Broadcom BCM5700
+		1028 0109  Broadcom BCM5700
+		1028 010a  Broadcom BCM5700
 		10b7 1000  3C996-T 1000BaseTX
 		10b7 1001  3C996B-T 1000BaseTX
 		10b7 1002  3C996C-T 1000BaseTX
 		10b7 1003  3C997-T 1000BaseTX
 		10b7 1004  3C996-SX 1000BaseSX
 		10b7 1005  3C997-SX 1000BaseSX
+		10b7 1008  3C942 Gigabit LOM (31X31)
 		14e4 0002  NetXtreme 1000BaseSX
 		14e4 0003  NetXtreme 1000BaseSX
 		14e4 0004  NetXtreme 1000BaseTX
@@ -4197,6 +4203,7 @@
 		0e11 007c  NC7770 1000BaseTX
 		0e11 007d  NC6770 1000BaseSX
 		0e11 0085  NC7780 1000BaseTX
+		1028 0121  Broadcom BCM5701
 		10b7 1004  3C996-SX 1000BaseSX
 		10b7 1006  3C996B-T 1000BaseTX
 		10b7 1007  3C1000-T 1000BaseTX
@@ -4207,7 +4214,16 @@
 		14e4 0007  NetXtreme BCM5701 1000BaseSX
 		14e4 0008  NetXtreme BCM5701 1000BaseTX
 		14e4 8008  NetXtreme BCM5701 1000BaseTX
+	1646  NetXtreme BCM5702 Gigabit Ethernet
+		14e4 8009  Broadcom BCM5702
 	1647  NetXtreme BCM5703 Gigabit Ethernet
+		0e11 009a  NC7770
+		0e11 0099  NC7780
+		14e4 0009  Broadcom BCM5703
+		14e4 8009  Broadcom BCM5703
+	164d  NetXtreme BCM5702FE Gigabit Ethernet
+	16a6  NetXtreme BCM5702X Gigabit Ethernet
+	16a7  NetXtreme BCM5703X Gigabit Ethernet
 	5820  BCM5820 Crypto Accelerator
 14e5  Pixelfusion Ltd
 14e6  SHINING Technology Inc
@@ -4647,6 +4663,8 @@
 	0400  FarSync T2P (2 port X.21/V.35/V.24)
 	0440  FarSync T4P (4 port X.21/V.35/V.24)
 1668  Action Tec Electronics Inc
+173b  Altima (nee BroadCom)
+	03e8  AC1000 Gigabit Ethernet
 1813  Ambient Technologies Inc
 1a08  Sierra semiconductor
 	0000  SC15064

include/linux/pci_ids.h

@@ -1494,7 +1494,11 @@
 #define PCI_VENDOR_ID_BROADCOM		0x14e4
 #define PCI_DEVICE_ID_TIGON3_5700	0x1644
 #define PCI_DEVICE_ID_TIGON3_5701	0x1645
+#define PCI_DEVICE_ID_TIGON3_5702	0x1646
 #define PCI_DEVICE_ID_TIGON3_5703	0x1647
+#define PCI_DEVICE_ID_TIGON3_5702FE	0x164d
+#define PCI_DEVICE_ID_TIGON3_5702X	0x16a6
+#define PCI_DEVICE_ID_TIGON3_5703X	0x16a7
 
 #define PCI_VENDOR_ID_SYBA		0x1592
 #define PCI_DEVICE_ID_SYBA_2P_EPP	0x0782
@@ -1517,6 +1521,9 @@
 #define PCI_DEVICE_ID_MACROLINK_MCCR8	0x2000
 #define PCI_DEVICE_ID_MACROLINK_MCCR	0x2001
 
+#define PCI_VENDOR_ID_ALTIMA		0x173b
+#define PCI_DEVICE_ID_ALTIMA_AC1000	0x03e8
+
 #define PCI_VENDOR_ID_SYMPHONY		0x1c1c
 #define PCI_DEVICE_ID_SYMPHONY_101	0x0001