net: hns3: Fix initialization when cmd is not supported

When ae_dev doesn't support DCB, rx_priv_wl_config,
common_thrd_config and tm_qs_bp_cfg can't be called, otherwise
cmd return fail, which causes the hclge module initialization
process to fail.
This patch fix it by adding a DCB capability flag to check if
the ae_dev support DCB.

Fixes: 46a3df9f ("net: hns3: Add HNS3 Acceleration Engine & Compatibility Layer Support")
Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/ethernet/hisilicon/hns3/hnae3.h

@@ -50,10 +50,17 @@
 
 #define HNAE3_DEV_INITED_B			0x0
 #define HNAE3_DEV_SUPPORT_ROCE_B		0x1
+#define HNAE3_DEV_SUPPORT_DCB_B			0x2
+
+#define HNAE3_DEV_SUPPORT_ROCE_DCB_BITS (BIT(HNAE3_DEV_SUPPORT_DCB_B) |\
+		BIT(HNAE3_DEV_SUPPORT_ROCE_B))
 
 #define hnae3_dev_roce_supported(hdev) \
 	hnae_get_bit(hdev->ae_dev->flag, HNAE3_DEV_SUPPORT_ROCE_B)
 
+#define hnae3_dev_dcb_supported(hdev) \
+	hnae_get_bit(hdev->ae_dev->flag, HNAE3_DEV_SUPPORT_DCB_B)
+
 #define ring_ptr_move_fw(ring, p) \
 	((ring)->p = ((ring)->p + 1) % (ring)->desc_num)
 #define ring_ptr_move_bw(ring, p) \

drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c

@@ -1772,19 +1772,23 @@ int hclge_buffer_alloc(struct hclge_dev *hdev)
 		return ret;
 	}
 
+	if (hnae3_dev_dcb_supported(hdev)) {
 		ret = hclge_rx_priv_wl_config(hdev);
 		if (ret) {
 			dev_err(&hdev->pdev->dev,
-			"could not configure rx private waterline %d\n", ret);
+				"could not configure rx private waterline %d\n",
+				ret);
 			return ret;
 		}
 
 		ret = hclge_common_thrd_config(hdev);
 		if (ret) {
 			dev_err(&hdev->pdev->dev,
-			"could not configure common threshold %d\n", ret);
+				"could not configure common threshold %d\n",
+				ret);
 			return ret;
 		}
+	}
 
 	ret = hclge_common_wl_config(hdev);
 	if (ret) {

drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_tm.c

@@ -976,6 +976,10 @@ int hclge_pause_setup_hw(struct hclge_dev *hdev)
 	if (ret)
 		return ret;
 
+	/* Only DCB-supported dev supports qset back pressure setting */
+	if (!hnae3_dev_dcb_supported(hdev))
+		return 0;
+
 	for (i = 0; i < hdev->tm_info.num_tc; i++) {
 		ret = hclge_tm_qs_bp_cfg(hdev, i);
 		if (ret)

drivers/net/ethernet/hisilicon/hns3/hns3pf/hns3_enet.c

@@ -42,15 +42,15 @@ static const struct pci_device_id hns3_pci_tbl[] = {
 	{PCI_VDEVICE(HUAWEI, HNAE3_DEV_ID_GE), 0},
 	{PCI_VDEVICE(HUAWEI, HNAE3_DEV_ID_25GE), 0},
 	{PCI_VDEVICE(HUAWEI, HNAE3_DEV_ID_25GE_RDMA),
-	 BIT(HNAE3_DEV_SUPPORT_ROCE_B)},
+	 HNAE3_DEV_SUPPORT_ROCE_DCB_BITS},
 	{PCI_VDEVICE(HUAWEI, HNAE3_DEV_ID_25GE_RDMA_MACSEC),
-	 BIT(HNAE3_DEV_SUPPORT_ROCE_B)},
+	 HNAE3_DEV_SUPPORT_ROCE_DCB_BITS},
 	{PCI_VDEVICE(HUAWEI, HNAE3_DEV_ID_50GE_RDMA),
-	 BIT(HNAE3_DEV_SUPPORT_ROCE_B)},
+	 HNAE3_DEV_SUPPORT_ROCE_DCB_BITS},
 	{PCI_VDEVICE(HUAWEI, HNAE3_DEV_ID_50GE_RDMA_MACSEC),
-	 BIT(HNAE3_DEV_SUPPORT_ROCE_B)},
+	 HNAE3_DEV_SUPPORT_ROCE_DCB_BITS},
 	{PCI_VDEVICE(HUAWEI, HNAE3_DEV_ID_100G_RDMA_MACSEC),
-	 BIT(HNAE3_DEV_SUPPORT_ROCE_B)},
+	 HNAE3_DEV_SUPPORT_ROCE_DCB_BITS},
 	/* required last entry */
 	{0, }
 };