Skip to content

L
linux
Commit 2db0624b authored by Oleksij Rempel's avatar Oleksij Rempel Committed by Shawn Guo
Browse files
Options

ARM: dts: add JOZ Access Point 

JOZ Access Point is imx6ull based device designed for agricultural
cleaning machines.
Signed-off-by: default avatarOleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: default avatarShawn Guo <shawnguo@kernel.org>
parent 1aa590c8
Show whitespace changes
Inline Side-by-side
Showing with 457 additions and 0 deletions
arch/arm/boot/dts/Makefile
View file @ 2db0624b
......@@ -688,6 +688,7 @@ dtb-$(CONFIG_SOC_IMX6UL) += \
imx6ull-colibri-emmc-eval-v3.dtb \
imx6ull-colibri-eval-v3.dtb \
imx6ull-colibri-wifi-eval-v3.dtb \
imx6ull-jozacp.dtb \
imx6ull-myir-mys-6ulx-eval.dtb \
imx6ull-opos6uldev.dtb \
imx6ull-phytec-segin-ff-rdk-nand.dtb \
......
arch/arm/boot/dts/imx6ull-jozacp.dts 0 → 100644
View file @ 2db0624b
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/*
* Copyright (c) 2020 Protonic Holland
* Copyright (c) 2020 Oleksij Rempel <kernel@pengutronix.de>, Pengutronix
*/
/dts-v1/;
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/leds/common.h>
#include "imx6ull.dtsi"
/ {
model = "JOZ Access Point";
compatible = "joz,jozacp", "fsl,imx6ull";
chosen {
stdout-path = &uart1;
};
/* On board name LED_RGB1 */
led-controller-1 {
compatible = "pwm-leds";
led-0 {
color = <LED_COLOR_ID_RED>;
function = LED_FUNCTION_INDICATOR;
function-enumerator = <0>;
pwms = <&pwm1 0 10000000 0>;
max-brightness = <255>;
};
led-1 {
color = <LED_COLOR_ID_GREEN>;
function = LED_FUNCTION_INDICATOR;
function-enumerator = <1>;
pwms = <&pwm3 0 10000000 0>;
max-brightness = <255>;
};
led-2 {
color = <LED_COLOR_ID_BLUE>;
function = LED_FUNCTION_INDICATOR;
function-enumerator = <2>;
pwms = <&pwm5 0 10000000 0>;
max-brightness = <255>;
linux,default-trigger = "heartbeat";
};
};
/* On board name LED_RGB2 */
led-controller-2 {
compatible = "pwm-leds";
led-3 {
color = <LED_COLOR_ID_RED>;
function = LED_FUNCTION_INDICATOR;
function-enumerator = <3>;
pwms = <&pwm2 0 10000000 0>;
max-brightness = <255>;
};
led-4 {
color = <LED_COLOR_ID_GREEN>;
function = LED_FUNCTION_INDICATOR;
function-enumerator = <4>;
pwms = <&pwm4 0 10000000 0>;
max-brightness = <255>;
};
led-5 {
color = <LED_COLOR_ID_BLUE>;
function = LED_FUNCTION_INDICATOR;
function-enumerator = <5>;
pwms = <&pwm6 0 10000000 0>;
max-brightness = <255>;
};
};
reg_3v3: regulator-3v3 {
compatible = "regulator-fixed";
regulator-name = "3v3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
vin-supply = <&reg_5v0>;
};
reg_5v0: regulator-5v0 {
compatible = "regulator-fixed";
regulator-name = "5v0";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
};
reg_vbus: regulator-vbus {
compatible = "regulator-fixed";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_vbus>;
regulator-name = "vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
vin-supply = <&reg_5v0>;
gpio = <&gpio1 2 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
usdhc2_wifi_pwrseq: usdhc2-wifi-pwrseq {
compatible = "mmc-pwrseq-simple";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_wifi_npd>;
reset-gpios = <&gpio4 25 GPIO_ACTIVE_LOW>;
};
};
&can1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_can1>;
status = "okay";
};
&cpu0 {
clock-frequency = <792000000>;
};
&fec1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_enet1>;
phy-mode = "rmii";
phy-handle = <&ethphy0>;
status = "okay";
mdio {
#address-cells = <1>;
#size-cells = <0>;
ethphy0: ethernet-phy@0 {
reg = <0>;
clocks = <&clks IMX6UL_CLK_ENET_REF>;
clock-names = "rmii-ref";
interrupts-extended = <&gpio1 29 IRQ_TYPE_LEVEL_LOW>;
reset-gpios = <&gpio1 28 GPIO_ACTIVE_LOW>;
reset-assert-us = <10000>;
reset-deassert-us = <300>;
};
};
};
&i2c1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c1>;
clock-frequency = <100000>;
status = "okay";
};
&i2c2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c2>;
clock-frequency = <100000>;
status = "okay";
rtc@51 {
compatible = "nxp,pcf8563";
reg = <0x51>;
};
};
&pwm1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pwm1>;
status = "okay";
};
&pwm2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pwm2>;
status = "okay";
};
&pwm3 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pwm3>;
status = "okay";
};
&pwm4 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pwm4>;
status = "okay";
};
&pwm5 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pwm5>;
status = "okay";
};
&pwm6 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pwm6>;
status = "okay";
};
&snvs_rtc {
status = "disabled";
};
&uart1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart1>;
status = "okay";
};
&uart4 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart4>;
dtr-gpios = <&gpio3 4 GPIO_ACTIVE_LOW>;
uart-has-rtscts;
status = "okay";
};
&usbotg1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usbotg1>;
vbus-supply = <&reg_vbus>;
dr_mode = "host";
over-current-active-low;
status = "okay";
};
&usdhc1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usdhc1>;
vmmc-supply = <&reg_3v3>;
bus-width = <8>;
no-1-8-v;
non-removable;
cap-mmc-hw-reset;
no-sd;
no-sdio;
status = "okay";
};
&usdhc2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usdhc2>;
mmc-pwrseq = <&usdhc2_wifi_pwrseq>;
bus-width = <4>;
no-1-8-v;
no-mmc;
no-sd;
non-removable;
#address-cells = <1>;
#size-cells = <0>;
status = "okay";
wifi@1 {
compatible = "brcm,bcm4329-fmac";
reg = <1>;
};
};
&iomuxc {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_hog>;
pinctrl_can1: can1grp {
fsl,pins = <
MX6UL_PAD_UART3_CTS_B__FLEXCAN1_TX 0x1b0b0
MX6UL_PAD_UART3_RTS_B__FLEXCAN1_RX 0x1b0b0
>;
};
pinctrl_enet1: enet1grp {
fsl,pins = <
MX6UL_PAD_GPIO1_IO07__ENET1_MDC 0x1b0b0
MX6UL_PAD_GPIO1_IO06__ENET1_MDIO 0x1b0b0
MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN 0x1b0b0
MX6UL_PAD_ENET1_RX_ER__ENET1_RX_ER 0x1b0b0
MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00 0x1b0b0
MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01 0x1b0b0
MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN 0x1b0b0
MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00 0x1b0b0
MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01 0x1b0b0
MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1 0x4001b031
MX6UL_PAD_UART4_TX_DATA__GPIO1_IO28 0x038b0
MX6UL_PAD_UART4_RX_DATA__GPIO1_IO29 0x170b0
>;
};
pinctrl_hog: hoggrp {
fsl,pins = <
/* HW Revision */
MX6UL_PAD_ENET2_RX_DATA0__GPIO2_IO08 0x1b0b0
MX6UL_PAD_ENET2_RX_DATA1__GPIO2_IO09 0x1b0b0
MX6UL_PAD_ENET2_RX_EN__GPIO2_IO10 0x1b0b0
/* HW ID */
MX6UL_PAD_ENET2_TX_DATA0__GPIO2_IO11 0x1b0b0
MX6UL_PAD_ENET2_TX_DATA1__GPIO2_IO12 0x1b0b0
MX6UL_PAD_ENET2_TX_EN__GPIO2_IO13 0x1b0b0
MX6UL_PAD_ENET2_TX_CLK__GPIO2_IO14 0x1b0b0
MX6UL_PAD_ENET2_RX_ER__GPIO2_IO15 0x1b0b0
/* Digital inputs */
MX6UL_PAD_GPIO1_IO03__GPIO1_IO03 0x11000
MX6UL_PAD_GPIO1_IO04__GPIO1_IO04 0x11000
MX6UL_PAD_GPIO1_IO05__GPIO1_IO05 0x11000
MX6UL_PAD_GPIO1_IO08__GPIO1_IO08 0x11000
MX6UL_PAD_GPIO1_IO09__GPIO1_IO09 0x11000
/* Isolated outputs */
MX6UL_PAD_UART2_TX_DATA__GPIO1_IO20 0x01020
MX6UL_PAD_UART2_RX_DATA__GPIO1_IO21 0x01020
MX6UL_PAD_UART2_RTS_B__GPIO1_IO23 0x01020
MX6UL_PAD_UART3_TX_DATA__GPIO1_IO24 0x01020
MX6UL_PAD_UART3_RX_DATA__GPIO1_IO25 0x01020
>;
};
pinctrl_i2c1: i2c1grp {
fsl,pins = <
MX6UL_PAD_CSI_MCLK__I2C1_SDA 0x4001f8b1
MX6UL_PAD_CSI_PIXCLK__I2C1_SCL 0x4001f8b1
>;
};
pinctrl_i2c2: i2c2grp {
fsl,pins = <
MX6UL_PAD_UART5_RX_DATA__I2C2_SDA 0x4001f8b1
MX6UL_PAD_UART5_TX_DATA__I2C2_SCL 0x4001f8b1
>;
};
pinctrl_pwm1: pwm1grp {
fsl,pins = <
MX6UL_PAD_LCD_DATA00__PWM1_OUT 0x01010
>;
};
pinctrl_pwm2: pwm2grp {
fsl,pins = <
MX6UL_PAD_LCD_DATA01__PWM2_OUT 0x01010
>;
};
pinctrl_pwm3: pwm3grp {
fsl,pins = <
MX6UL_PAD_LCD_DATA02__PWM3_OUT 0x01010
>;
};
pinctrl_pwm4: pwm4grp {
fsl,pins = <
MX6UL_PAD_LCD_DATA03__PWM4_OUT 0x01010
>;
};
pinctrl_pwm5: pwm5grp {
fsl,pins = <
MX6UL_PAD_LCD_DATA18__PWM5_OUT 0x01010
>;
};
pinctrl_pwm6: pwm6grp {
fsl,pins = <
MX6UL_PAD_LCD_DATA19__PWM6_OUT 0x01010
>;
};
pinctrl_uart1: uart1grp {
fsl,pins = <
MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX 0x1b0b1
MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX 0x1b0b1
>;
};
pinctrl_uart4: uart4grp {
fsl,pins = <
MX6UL_PAD_LCD_CLK__UART4_DCE_TX 0x1b0b0
MX6UL_PAD_LCD_ENABLE__UART4_DCE_RX 0x1b0b0
MX6UL_PAD_LCD_HSYNC__UART4_DCE_CTS 0x1b0b0
MX6UL_PAD_LCD_VSYNC__UART4_DCE_RTS 0x1b0b0
MX6UL_PAD_LCD_RESET__GPIO3_IO04 0x1b0b0
>;
};
pinctrl_usbotg1: usbotg1grp {
fsl,pins = <
MX6UL_PAD_GPIO1_IO01__USB_OTG1_OC 0x1b0b0
>;
};
pinctrl_usdhc1: usdhc1grp {
fsl,pins = <
MX6UL_PAD_NAND_WP_B__USDHC1_RESET_B 0x17099
MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x1f099
MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x10099
MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x17099
MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x17099
MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x17099
MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x17099
MX6UL_PAD_NAND_READY_B__USDHC1_DATA4 0x17099
MX6UL_PAD_NAND_CE0_B__USDHC1_DATA5 0x17099
MX6UL_PAD_NAND_CE1_B__USDHC1_DATA6 0x17099
MX6UL_PAD_NAND_CLE__USDHC1_DATA7 0x17099
>;
};
pinctrl_usdhc2: usdhc2grp {
fsl,pins = <
MX6UL_PAD_CSI_VSYNC__USDHC2_CLK 0x100b9
MX6UL_PAD_CSI_HSYNC__USDHC2_CMD 0x170b9
MX6UL_PAD_CSI_DATA00__USDHC2_DATA0 0x170b9
MX6UL_PAD_CSI_DATA01__USDHC2_DATA1 0x170b9
MX6UL_PAD_CSI_DATA02__USDHC2_DATA2 0x170b9
MX6UL_PAD_CSI_DATA03__USDHC2_DATA3 0x170b9
>;
};
pinctrl_vbus: vbus0grp {
fsl,pins = <
MX6UL_PAD_GPIO1_IO02__GPIO1_IO02 0x030b0
>;
};
pinctrl_wifi_npd: wifigrp {
fsl,pins = <
/* WL_REG_ON */
MX6UL_PAD_CSI_DATA04__GPIO4_IO25 0x03020
>;
};
};
&iomuxc_snvs {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_snvs_hog>;
pinctrl_snvs_hog: snvs-hog-grp {
fsl,pins = <
/* Digital outputs */
MX6ULL_PAD_SNVS_TAMPER2__GPIO5_IO02 0x00020
MX6ULL_PAD_SNVS_TAMPER3__GPIO5_IO03 0x00020
MX6ULL_PAD_SNVS_TAMPER4__GPIO5_IO04 0x00020
MX6ULL_PAD_SNVS_TAMPER5__GPIO5_IO05 0x00020
MX6ULL_PAD_SNVS_TAMPER6__GPIO5_IO06 0x00020
/* Digital outputs fault feedback */
MX6ULL_PAD_SNVS_TAMPER0__GPIO5_IO00 0x17000
MX6ULL_PAD_SNVS_TAMPER1__GPIO5_IO01 0x17000
MX6ULL_PAD_SNVS_TAMPER7__GPIO5_IO07 0x17000
MX6ULL_PAD_SNVS_TAMPER8__GPIO5_IO08 0x17000
MX6ULL_PAD_SNVS_TAMPER9__GPIO5_IO09 0x17000
>;
};
};
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7