Commit 2de0b3c0 authored by Eugen Hristev's avatar Eugen Hristev Committed by Mauro Carvalho Chehab

media: atmel: introduce microchip csi2dc driver

Microchip CSI2DC (CSI2 Demultiplexer Controller) is a misc bridge device
that converts a byte stream in IDI Synopsys format (coming from a CSI2HOST)
to a pixel stream that can be captured by a sensor controller.
Signed-off-by: default avatarEugen Hristev <eugen.hristev@microchip.com>
Reviewed-by: default avatarJacopo Mondi <jacopo+renesas@jmondi.org>
Signed-off-by: default avatarHans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: default avatarMauro Carvalho Chehab <mchehab@kernel.org>
parent 76a5341c
......@@ -69,6 +69,7 @@ obj-$(CONFIG_VIDEO_RCAR_VIN) += rcar-vin/
obj-$(CONFIG_VIDEO_ATMEL_ISC) += atmel/
obj-$(CONFIG_VIDEO_ATMEL_ISI) += atmel/
obj-$(CONFIG_VIDEO_ATMEL_XISC) += atmel/
obj-$(CONFIG_VIDEO_MICROCHIP_CSI2DC) += atmel/
obj-$(CONFIG_VIDEO_STM32_DCMI) += stm32/
obj-$(CONFIG_VIDEO_STM32_DMA2D) += stm32/
......
......@@ -40,3 +40,18 @@ config VIDEO_ATMEL_ISI
help
This module makes the ATMEL Image Sensor Interface available
as a v4l2 device.
config VIDEO_MICROCHIP_CSI2DC
tristate "Microchip CSI2 Demux Controller"
depends on VIDEO_V4L2 && COMMON_CLK && OF
depends on ARCH_AT91 || COMPILE_TEST
select MEDIA_CONTROLLER
select VIDEO_V4L2_SUBDEV_API
select V4L2_FWNODE
help
CSI2 Demux Controller driver. CSI2DC is a helper chip
that converts IDI interface byte stream to a parallel pixel stream.
It supports various RAW formats as input.
To compile this driver as a module, choose M here: the
module will be called microchip-csi2dc.
......@@ -6,3 +6,4 @@ obj-$(CONFIG_VIDEO_ATMEL_ISI) += atmel-isi.o
obj-$(CONFIG_VIDEO_ATMEL_ISC_BASE) += atmel-isc-base.o
obj-$(CONFIG_VIDEO_ATMEL_ISC) += atmel-isc.o
obj-$(CONFIG_VIDEO_ATMEL_XISC) += atmel-xisc.o
obj-$(CONFIG_VIDEO_MICROCHIP_CSI2DC) += microchip-csi2dc.o
// SPDX-License-Identifier: GPL-2.0-only
/*
* Microchip CSI2 Demux Controller (CSI2DC) driver
*
* Copyright (C) 2018 Microchip Technology, Inc.
*
* Author: Eugen Hristev <eugen.hristev@microchip.com>
*
*/
#include <linux/clk.h>
#include <linux/mod_devicetable.h>
#include <linux/module.h>
#include <linux/of_graph.h>
#include <linux/platform_device.h>
#include <linux/pm_runtime.h>
#include <linux/videodev2.h>
#include <media/v4l2-fwnode.h>
#include <media/v4l2-subdev.h>
/* Global configuration register */
#define CSI2DC_GCFG 0x0
/* MIPI sensor pixel clock is free running */
#define CSI2DC_GCFG_MIPIFRN BIT(0)
/* GPIO parallel interface selection */
#define CSI2DC_GCFG_GPIOSEL BIT(1)
/* Output waveform inter-line minimum delay */
#define CSI2DC_GCFG_HLC(v) ((v) << 4)
#define CSI2DC_GCFG_HLC_MASK GENMASK(7, 4)
/* SAMA7G5 requires a HLC delay of 15 */
#define SAMA7G5_HLC (15)
/* Global control register */
#define CSI2DC_GCTLR 0x04
#define CSI2DC_GCTLR_SWRST BIT(0)
/* Global status register */
#define CSI2DC_GS 0x08
/* SSP interrupt status register */
#define CSI2DC_SSPIS 0x28
/* Pipe update register */
#define CSI2DC_PU 0xc0
/* Video pipe attributes update */
#define CSI2DC_PU_VP BIT(0)
/* Pipe update status register */
#define CSI2DC_PUS 0xc4
/* Video pipeline Interrupt Status Register */
#define CSI2DC_VPISR 0xf4
/* Video pipeline enable register */
#define CSI2DC_VPE 0xf8
#define CSI2DC_VPE_ENABLE BIT(0)
/* Video pipeline configuration register */
#define CSI2DC_VPCFG 0xfc
/* Data type */
#define CSI2DC_VPCFG_DT(v) ((v) << 0)
#define CSI2DC_VPCFG_DT_MASK GENMASK(5, 0)
/* Virtual channel identifier */
#define CSI2DC_VPCFG_VC(v) ((v) << 6)
#define CSI2DC_VPCFG_VC_MASK GENMASK(7, 6)
/* Decompression enable */
#define CSI2DC_VPCFG_DE BIT(8)
/* Decoder mode */
#define CSI2DC_VPCFG_DM(v) ((v) << 9)
#define CSI2DC_VPCFG_DM_DECODER8TO12 0
/* Decoder predictor 2 selection */
#define CSI2DC_VPCFG_DP2 BIT(12)
/* Recommended memory storage */
#define CSI2DC_VPCFG_RMS BIT(13)
/* Post adjustment */
#define CSI2DC_VPCFG_PA BIT(14)
/* Video pipeline column register */
#define CSI2DC_VPCOL 0x100
/* Column number */
#define CSI2DC_VPCOL_COL(v) ((v) << 0)
#define CSI2DC_VPCOL_COL_MASK GENMASK(15, 0)
/* Video pipeline row register */
#define CSI2DC_VPROW 0x104
/* Row number */
#define CSI2DC_VPROW_ROW(v) ((v) << 0)
#define CSI2DC_VPROW_ROW_MASK GENMASK(15, 0)
/* Version register */
#define CSI2DC_VERSION 0x1fc
/* register read/write helpers */
#define csi2dc_readl(st, reg) readl_relaxed((st)->base + (reg))
#define csi2dc_writel(st, reg, val) writel_relaxed((val), \
(st)->base + (reg))
/* supported RAW data types */
#define CSI2DC_DT_RAW6 0x28
#define CSI2DC_DT_RAW7 0x29
#define CSI2DC_DT_RAW8 0x2a
#define CSI2DC_DT_RAW10 0x2b
#define CSI2DC_DT_RAW12 0x2c
#define CSI2DC_DT_RAW14 0x2d
/* YUV data types */
#define CSI2DC_DT_YUV422_8B 0x1e
/*
* struct csi2dc_format - CSI2DC format type struct
* @mbus_code: Media bus code for the format
* @dt: Data type constant for this format
*/
struct csi2dc_format {
u32 mbus_code;
u32 dt;
};
static const struct csi2dc_format csi2dc_formats[] = {
{
.mbus_code = MEDIA_BUS_FMT_SRGGB8_1X8,
.dt = CSI2DC_DT_RAW8,
}, {
.mbus_code = MEDIA_BUS_FMT_SBGGR8_1X8,
.dt = CSI2DC_DT_RAW8,
}, {
.mbus_code = MEDIA_BUS_FMT_SGRBG8_1X8,
.dt = CSI2DC_DT_RAW8,
}, {
.mbus_code = MEDIA_BUS_FMT_SGBRG8_1X8,
.dt = CSI2DC_DT_RAW8,
}, {
.mbus_code = MEDIA_BUS_FMT_SRGGB10_1X10,
.dt = CSI2DC_DT_RAW10,
}, {
.mbus_code = MEDIA_BUS_FMT_SBGGR10_1X10,
.dt = CSI2DC_DT_RAW10,
}, {
.mbus_code = MEDIA_BUS_FMT_SGRBG10_1X10,
.dt = CSI2DC_DT_RAW10,
}, {
.mbus_code = MEDIA_BUS_FMT_SGBRG10_1X10,
.dt = CSI2DC_DT_RAW10,
}, {
.mbus_code = MEDIA_BUS_FMT_YUYV8_2X8,
.dt = CSI2DC_DT_YUV422_8B,
},
};
enum mipi_csi_pads {
CSI2DC_PAD_SINK = 0,
CSI2DC_PAD_SOURCE = 1,
CSI2DC_PADS_NUM = 2,
};
/*
* struct csi2dc_device - CSI2DC device driver data/config struct
* @base: Register map base address
* @csi2dc_sd: v4l2 subdevice for the csi2dc device
* This is the subdevice that the csi2dc device itself
* registers in v4l2 subsystem
* @dev: struct device for this csi2dc device
* @pclk: Peripheral clock reference
* Input clock that clocks the hardware block internal
* logic
* @scck: Sensor Controller clock reference
* Input clock that is used to generate the pixel clock
* @format: Current saved format used in g/s fmt
* @cur_fmt: Current state format
* @try_fmt: Try format that is being tried
* @pads: Media entity pads for the csi2dc subdevice
* @clk_gated: Whether the clock is gated or free running
* @video_pipe: Whether video pipeline is configured
* @parallel_mode: The underlying subdevice is connected on a parallel bus
* @vc: Current set virtual channel
* @notifier: Async notifier that is used to bound the underlying
* subdevice to the csi2dc subdevice
* @input_sd: Reference to the underlying subdevice bound to the
* csi2dc subdevice
* @remote_pad: Pad number of the underlying subdevice that is linked
* to the csi2dc subdevice sink pad.
*/
struct csi2dc_device {
void __iomem *base;
struct v4l2_subdev csi2dc_sd;
struct device *dev;
struct clk *pclk;
struct clk *scck;
struct v4l2_mbus_framefmt format;
const struct csi2dc_format *cur_fmt;
const struct csi2dc_format *try_fmt;
struct media_pad pads[CSI2DC_PADS_NUM];
bool clk_gated;
bool video_pipe;
bool parallel_mode;
u32 vc;
struct v4l2_async_notifier notifier;
struct v4l2_subdev *input_sd;
u32 remote_pad;
};
static inline struct csi2dc_device *
csi2dc_sd_to_csi2dc_device(struct v4l2_subdev *csi2dc_sd)
{
return container_of(csi2dc_sd, struct csi2dc_device, csi2dc_sd);
}
static int csi2dc_enum_mbus_code(struct v4l2_subdev *csi2dc_sd,
struct v4l2_subdev_state *sd_state,
struct v4l2_subdev_mbus_code_enum *code)
{
if (code->index >= ARRAY_SIZE(csi2dc_formats))
return -EINVAL;
code->code = csi2dc_formats[code->index].mbus_code;
return 0;
}
static int csi2dc_get_fmt(struct v4l2_subdev *csi2dc_sd,
struct v4l2_subdev_state *sd_state,
struct v4l2_subdev_format *format)
{
struct csi2dc_device *csi2dc = csi2dc_sd_to_csi2dc_device(csi2dc_sd);
struct v4l2_mbus_framefmt *v4l2_try_fmt;
if (format->which == V4L2_SUBDEV_FORMAT_TRY) {
v4l2_try_fmt = v4l2_subdev_get_try_format(csi2dc_sd, sd_state,
format->pad);
format->format = *v4l2_try_fmt;
return 0;
}
format->format = csi2dc->format;
return 0;
}
static int csi2dc_set_fmt(struct v4l2_subdev *csi2dc_sd,
struct v4l2_subdev_state *sd_state,
struct v4l2_subdev_format *req_fmt)
{
struct csi2dc_device *csi2dc = csi2dc_sd_to_csi2dc_device(csi2dc_sd);
const struct csi2dc_format *fmt, *try_fmt = NULL;
struct v4l2_mbus_framefmt *v4l2_try_fmt;
unsigned int i;
/*
* Setting the source pad is disabled.
* The same format is being propagated from the sink to source.
*/
if (req_fmt->pad == CSI2DC_PAD_SOURCE)
return -EINVAL;
for (i = 0; i < ARRAY_SIZE(csi2dc_formats); i++) {
fmt = &csi2dc_formats[i];
if (req_fmt->format.code == fmt->mbus_code)
try_fmt = fmt;
fmt++;
}
/* in case we could not find the desired format, default to something */
if (!try_fmt) {
try_fmt = &csi2dc_formats[0];
dev_dbg(csi2dc->dev,
"CSI2DC unsupported format 0x%x, defaulting to 0x%x\n",
req_fmt->format.code, csi2dc_formats[0].mbus_code);
}
req_fmt->format.code = try_fmt->mbus_code;
req_fmt->format.colorspace = V4L2_COLORSPACE_SRGB;
req_fmt->format.field = V4L2_FIELD_NONE;
if (req_fmt->which == V4L2_SUBDEV_FORMAT_TRY) {
v4l2_try_fmt = v4l2_subdev_get_try_format(csi2dc_sd, sd_state,
req_fmt->pad);
*v4l2_try_fmt = req_fmt->format;
/* Trying on the sink pad makes the source pad change too */
v4l2_try_fmt = v4l2_subdev_get_try_format(csi2dc_sd,
sd_state,
CSI2DC_PAD_SOURCE);
*v4l2_try_fmt = req_fmt->format;
/* if we are just trying, we are done */
return 0;
}
/* save the format for later requests */
csi2dc->format = req_fmt->format;
/* update config */
csi2dc->cur_fmt = try_fmt;
dev_dbg(csi2dc->dev, "new format set: 0x%x @%dx%d\n",
csi2dc->format.code, csi2dc->format.width,
csi2dc->format.height);
return 0;
}
static int csi2dc_power(struct csi2dc_device *csi2dc, int on)
{
int ret = 0;
if (on) {
ret = clk_prepare_enable(csi2dc->pclk);
if (ret) {
dev_err(csi2dc->dev, "failed to enable pclk:%d\n", ret);
return ret;
}
ret = clk_prepare_enable(csi2dc->scck);
if (ret) {
dev_err(csi2dc->dev, "failed to enable scck:%d\n", ret);
clk_disable_unprepare(csi2dc->pclk);
return ret;
}
/* if powering up, deassert reset line */
csi2dc_writel(csi2dc, CSI2DC_GCTLR, CSI2DC_GCTLR_SWRST);
} else {
/* if powering down, assert reset line */
csi2dc_writel(csi2dc, CSI2DC_GCTLR, 0);
clk_disable_unprepare(csi2dc->scck);
clk_disable_unprepare(csi2dc->pclk);
}
return ret;
}
static int csi2dc_get_mbus_config(struct csi2dc_device *csi2dc)
{
struct v4l2_mbus_config mbus_config = { 0 };
int ret;
ret = v4l2_subdev_call(csi2dc->input_sd, pad, get_mbus_config,
csi2dc->remote_pad, &mbus_config);
if (ret == -ENOIOCTLCMD) {
dev_dbg(csi2dc->dev,
"no remote mbus configuration available\n");
goto csi2dc_get_mbus_config_defaults;
}
if (ret) {
dev_err(csi2dc->dev,
"failed to get remote mbus configuration\n");
goto csi2dc_get_mbus_config_defaults;
}
if (mbus_config.flags & V4L2_MBUS_CSI2_CHANNEL_0)
csi2dc->vc = 0;
else if (mbus_config.flags & V4L2_MBUS_CSI2_CHANNEL_1)
csi2dc->vc = 1;
else if (mbus_config.flags & V4L2_MBUS_CSI2_CHANNEL_2)
csi2dc->vc = 2;
else if (mbus_config.flags & V4L2_MBUS_CSI2_CHANNEL_3)
csi2dc->vc = 3;
dev_dbg(csi2dc->dev, "subdev sending on channel %d\n", csi2dc->vc);
csi2dc->clk_gated = mbus_config.flags &
V4L2_MBUS_CSI2_NONCONTINUOUS_CLOCK;
dev_dbg(csi2dc->dev, "mbus_config: %s clock\n",
csi2dc->clk_gated ? "gated" : "free running");
return 0;
csi2dc_get_mbus_config_defaults:
csi2dc->vc = 0; /* Virtual ID 0 by default */
return 0;
}
static void csi2dc_vp_update(struct csi2dc_device *csi2dc)
{
u32 vp, gcfg;
if (!csi2dc->video_pipe) {
dev_err(csi2dc->dev, "video pipeline unavailable\n");
return;
}
if (csi2dc->parallel_mode) {
/* In parallel mode, GPIO parallel interface must be selected */
gcfg = csi2dc_readl(csi2dc, CSI2DC_GCFG);
gcfg |= CSI2DC_GCFG_GPIOSEL;
csi2dc_writel(csi2dc, CSI2DC_GCFG, gcfg);
return;
}
/* serial video pipeline */
csi2dc_writel(csi2dc, CSI2DC_GCFG,
(SAMA7G5_HLC & CSI2DC_GCFG_HLC_MASK) |
(csi2dc->clk_gated ? 0 : CSI2DC_GCFG_MIPIFRN));
vp = CSI2DC_VPCFG_DT(csi2dc->cur_fmt->dt) & CSI2DC_VPCFG_DT_MASK;
vp |= CSI2DC_VPCFG_VC(csi2dc->vc) & CSI2DC_VPCFG_VC_MASK;
vp &= ~CSI2DC_VPCFG_DE;
vp |= CSI2DC_VPCFG_DM(CSI2DC_VPCFG_DM_DECODER8TO12);
vp &= ~CSI2DC_VPCFG_DP2;
vp &= ~CSI2DC_VPCFG_RMS;
vp |= CSI2DC_VPCFG_PA;
csi2dc_writel(csi2dc, CSI2DC_VPCFG, vp);
csi2dc_writel(csi2dc, CSI2DC_VPE, CSI2DC_VPE_ENABLE);
csi2dc_writel(csi2dc, CSI2DC_PU, CSI2DC_PU_VP);
}
static int csi2dc_s_stream(struct v4l2_subdev *csi2dc_sd, int enable)
{
struct csi2dc_device *csi2dc = csi2dc_sd_to_csi2dc_device(csi2dc_sd);
int ret;
if (enable) {
ret = pm_runtime_resume_and_get(csi2dc->dev);
if (ret < 0)
return ret;
csi2dc_get_mbus_config(csi2dc);
csi2dc_vp_update(csi2dc);
return v4l2_subdev_call(csi2dc->input_sd, video, s_stream,
true);
}
dev_dbg(csi2dc->dev,
"Last frame received: VPCOLR = %u, VPROWR= %u, VPISR = %x\n",
csi2dc_readl(csi2dc, CSI2DC_VPCOL),
csi2dc_readl(csi2dc, CSI2DC_VPROW),
csi2dc_readl(csi2dc, CSI2DC_VPISR));
/* stop streaming scenario */
ret = v4l2_subdev_call(csi2dc->input_sd, video, s_stream, false);
pm_runtime_put_sync(csi2dc->dev);
return ret;
}
static int csi2dc_init_cfg(struct v4l2_subdev *csi2dc_sd,
struct v4l2_subdev_state *sd_state)
{
struct v4l2_mbus_framefmt *v4l2_try_fmt =
v4l2_subdev_get_try_format(csi2dc_sd, sd_state, 0);
v4l2_try_fmt->height = 480;
v4l2_try_fmt->width = 640;
v4l2_try_fmt->code = csi2dc_formats[0].mbus_code;
v4l2_try_fmt->colorspace = V4L2_COLORSPACE_SRGB;
v4l2_try_fmt->field = V4L2_FIELD_NONE;
v4l2_try_fmt->ycbcr_enc = V4L2_YCBCR_ENC_DEFAULT;
v4l2_try_fmt->quantization = V4L2_QUANTIZATION_DEFAULT;
v4l2_try_fmt->xfer_func = V4L2_XFER_FUNC_DEFAULT;
return 0;
}
static const struct v4l2_subdev_pad_ops csi2dc_pad_ops = {
.enum_mbus_code = csi2dc_enum_mbus_code,
.set_fmt = csi2dc_set_fmt,
.get_fmt = csi2dc_get_fmt,
.init_cfg = csi2dc_init_cfg,
};
static const struct v4l2_subdev_video_ops csi2dc_video_ops = {
.s_stream = csi2dc_s_stream,
};
static const struct v4l2_subdev_ops csi2dc_subdev_ops = {
.pad = &csi2dc_pad_ops,
.video = &csi2dc_video_ops,
};
static int csi2dc_async_bound(struct v4l2_async_notifier *notifier,
struct v4l2_subdev *subdev,
struct v4l2_async_subdev *asd)
{
struct csi2dc_device *csi2dc = container_of(notifier,
struct csi2dc_device, notifier);
int pad;
int ret;
csi2dc->input_sd = subdev;
pad = media_entity_get_fwnode_pad(&subdev->entity, asd->match.fwnode,
MEDIA_PAD_FL_SOURCE);
if (pad < 0) {
dev_err(csi2dc->dev, "Failed to find pad for %s\n",
subdev->name);
return pad;
}
csi2dc->remote_pad = pad;
ret = media_create_pad_link(&csi2dc->input_sd->entity,
csi2dc->remote_pad,
&csi2dc->csi2dc_sd.entity, 0,
MEDIA_LNK_FL_ENABLED);
if (ret) {
dev_err(csi2dc->dev,
"Failed to create pad link: %s to %s\n",
csi2dc->input_sd->entity.name,
csi2dc->csi2dc_sd.entity.name);
return ret;
}
dev_dbg(csi2dc->dev, "link with %s pad: %d\n",
csi2dc->input_sd->name, csi2dc->remote_pad);
return ret;
}
static const struct v4l2_async_notifier_operations csi2dc_async_ops = {
.bound = csi2dc_async_bound,
};
static int csi2dc_prepare_notifier(struct csi2dc_device *csi2dc,
struct fwnode_handle *input_fwnode)
{
struct v4l2_async_subdev *asd;
int ret = 0;
v4l2_async_nf_init(&csi2dc->notifier);
asd = v4l2_async_nf_add_fwnode_remote(&csi2dc->notifier,
input_fwnode,
struct v4l2_async_subdev);
fwnode_handle_put(input_fwnode);
if (IS_ERR(asd)) {
ret = PTR_ERR(asd);
dev_err(csi2dc->dev,
"failed to add async notifier for node %pOF: %d\n",
to_of_node(input_fwnode), ret);
v4l2_async_nf_cleanup(&csi2dc->notifier);
return ret;
}
csi2dc->notifier.ops = &csi2dc_async_ops;
ret = v4l2_async_subdev_nf_register(&csi2dc->csi2dc_sd,
&csi2dc->notifier);
if (ret) {
dev_err(csi2dc->dev, "fail to register async notifier: %d\n",
ret);
v4l2_async_nf_cleanup(&csi2dc->notifier);
}
return ret;
}
static int csi2dc_of_parse(struct csi2dc_device *csi2dc,
struct device_node *of_node)
{
struct fwnode_handle *input_fwnode, *output_fwnode;
struct v4l2_fwnode_endpoint input_endpoint = { 0 },
output_endpoint = { 0 };
int ret;
input_fwnode = fwnode_graph_get_next_endpoint(of_fwnode_handle(of_node),
NULL);
if (!input_fwnode) {
dev_err(csi2dc->dev,
"missing port node at %pOF, input node is mandatory.\n",
of_node);
return -EINVAL;
}
ret = v4l2_fwnode_endpoint_parse(input_fwnode, &input_endpoint);
if (ret) {
dev_err(csi2dc->dev, "endpoint not defined at %pOF\n", of_node);
goto csi2dc_of_parse_err;
}
if (input_endpoint.bus_type == V4L2_MBUS_PARALLEL ||
input_endpoint.bus_type == V4L2_MBUS_BT656) {
csi2dc->parallel_mode = true;
dev_dbg(csi2dc->dev,
"subdevice connected on parallel interface\n");
}
if (input_endpoint.bus_type == V4L2_MBUS_CSI2_DPHY) {
csi2dc->clk_gated = input_endpoint.bus.mipi_csi2.flags &
V4L2_MBUS_CSI2_NONCONTINUOUS_CLOCK;
dev_dbg(csi2dc->dev,
"subdevice connected on serial interface\n");
dev_dbg(csi2dc->dev, "DT: %s clock\n",
csi2dc->clk_gated ? "gated" : "free running");
}
output_fwnode = fwnode_graph_get_next_endpoint
(of_fwnode_handle(of_node), input_fwnode);
if (output_fwnode)
ret = v4l2_fwnode_endpoint_parse(output_fwnode,
&output_endpoint);
fwnode_handle_put(output_fwnode);
if (!output_fwnode || ret) {
dev_info(csi2dc->dev,
"missing output node at %pOF, data pipe available only.\n",
of_node);
} else {
if (output_endpoint.bus_type != V4L2_MBUS_PARALLEL &&
output_endpoint.bus_type != V4L2_MBUS_BT656) {
dev_err(csi2dc->dev,
"output port must be parallel/bt656.\n");
ret = -EINVAL;
goto csi2dc_of_parse_err;
}
csi2dc->video_pipe = true;
dev_dbg(csi2dc->dev,
"block %pOF [%d.%d]->[%d.%d] video pipeline\n",
of_node, input_endpoint.base.port,
input_endpoint.base.id, output_endpoint.base.port,
output_endpoint.base.id);
}
/* prepare async notifier for subdevice completion */
return csi2dc_prepare_notifier(csi2dc, input_fwnode);
csi2dc_of_parse_err:
fwnode_handle_put(input_fwnode);
return ret;
}
static void csi2dc_default_format(struct csi2dc_device *csi2dc)
{
csi2dc->cur_fmt = &csi2dc_formats[0];
csi2dc->format.height = 480;
csi2dc->format.width = 640;
csi2dc->format.code = csi2dc_formats[0].mbus_code;
csi2dc->format.colorspace = V4L2_COLORSPACE_SRGB;
csi2dc->format.field = V4L2_FIELD_NONE;
csi2dc->format.ycbcr_enc = V4L2_YCBCR_ENC_DEFAULT;
csi2dc->format.quantization = V4L2_QUANTIZATION_DEFAULT;
csi2dc->format.xfer_func = V4L2_XFER_FUNC_DEFAULT;
}
static int csi2dc_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
struct csi2dc_device *csi2dc;
int ret = 0;
u32 ver;
csi2dc = devm_kzalloc(dev, sizeof(*csi2dc), GFP_KERNEL);
if (!csi2dc)
return -ENOMEM;
csi2dc->dev = dev;
csi2dc->base = devm_platform_ioremap_resource(pdev, 0);
if (IS_ERR(csi2dc->base)) {
dev_err(dev, "base address not set\n");
return PTR_ERR(csi2dc->base);
}
csi2dc->pclk = devm_clk_get(dev, "pclk");
if (IS_ERR(csi2dc->pclk)) {
ret = PTR_ERR(csi2dc->pclk);
dev_err(dev, "failed to get pclk: %d\n", ret);
return ret;
}
csi2dc->scck = devm_clk_get(dev, "scck");
if (IS_ERR(csi2dc->scck)) {
ret = PTR_ERR(csi2dc->scck);
dev_err(dev, "failed to get scck: %d\n", ret);
return ret;
}
v4l2_subdev_init(&csi2dc->csi2dc_sd, &csi2dc_subdev_ops);
csi2dc->csi2dc_sd.owner = THIS_MODULE;
csi2dc->csi2dc_sd.dev = dev;
snprintf(csi2dc->csi2dc_sd.name, sizeof(csi2dc->csi2dc_sd.name),
"csi2dc");
csi2dc->csi2dc_sd.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE;
csi2dc->csi2dc_sd.entity.function = MEDIA_ENT_F_VID_IF_BRIDGE;
platform_set_drvdata(pdev, csi2dc);
ret = csi2dc_of_parse(csi2dc, dev->of_node);
if (ret)
goto csi2dc_probe_cleanup_entity;
csi2dc->pads[CSI2DC_PAD_SINK].flags = MEDIA_PAD_FL_SINK;
if (csi2dc->video_pipe)
csi2dc->pads[CSI2DC_PAD_SOURCE].flags = MEDIA_PAD_FL_SOURCE;
ret = media_entity_pads_init(&csi2dc->csi2dc_sd.entity,
csi2dc->video_pipe ? CSI2DC_PADS_NUM : 1,
csi2dc->pads);
if (ret < 0) {
dev_err(dev, "media entity init failed\n");
goto csi2dc_probe_cleanup_notifier;
}
csi2dc_default_format(csi2dc);
/* turn power on to validate capabilities */
ret = csi2dc_power(csi2dc, true);
if (ret < 0)
goto csi2dc_probe_cleanup_notifier;
pm_runtime_set_active(dev);
pm_runtime_enable(dev);
ver = csi2dc_readl(csi2dc, CSI2DC_VERSION);
/*
* we must register the subdev after PM runtime has been requested,
* otherwise we might bound immediately and request pm_runtime_resume
* before runtime_enable.
*/
ret = v4l2_async_register_subdev(&csi2dc->csi2dc_sd);
if (ret) {
dev_err(csi2dc->dev, "failed to register the subdevice\n");
goto csi2dc_probe_cleanup_notifier;
}
dev_info(dev, "Microchip CSI2DC version %x\n", ver);
return 0;
csi2dc_probe_cleanup_notifier:
v4l2_async_nf_cleanup(&csi2dc->notifier);
csi2dc_probe_cleanup_entity:
media_entity_cleanup(&csi2dc->csi2dc_sd.entity);
return ret;
}
static int csi2dc_remove(struct platform_device *pdev)
{
struct csi2dc_device *csi2dc = platform_get_drvdata(pdev);
pm_runtime_disable(&pdev->dev);
v4l2_async_unregister_subdev(&csi2dc->csi2dc_sd);
v4l2_async_nf_unregister(&csi2dc->notifier);
v4l2_async_nf_cleanup(&csi2dc->notifier);
media_entity_cleanup(&csi2dc->csi2dc_sd.entity);
return 0;
}
static int __maybe_unused csi2dc_runtime_suspend(struct device *dev)
{
struct csi2dc_device *csi2dc = dev_get_drvdata(dev);
return csi2dc_power(csi2dc, false);
}
static int __maybe_unused csi2dc_runtime_resume(struct device *dev)
{
struct csi2dc_device *csi2dc = dev_get_drvdata(dev);
return csi2dc_power(csi2dc, true);
}
static const struct dev_pm_ops csi2dc_dev_pm_ops = {
SET_RUNTIME_PM_OPS(csi2dc_runtime_suspend, csi2dc_runtime_resume, NULL)
};
static const struct of_device_id csi2dc_of_match[] = {
{ .compatible = "microchip,sama7g5-csi2dc" },
{ }
};
MODULE_DEVICE_TABLE(of, csi2dc_of_match);
static struct platform_driver csi2dc_driver = {
.probe = csi2dc_probe,
.remove = csi2dc_remove,
.driver = {
.name = "microchip-csi2dc",
.pm = &csi2dc_dev_pm_ops,
.of_match_table = of_match_ptr(csi2dc_of_match),
},
};
module_platform_driver(csi2dc_driver);
MODULE_AUTHOR("Eugen Hristev <eugen.hristev@microchip.com>");
MODULE_DESCRIPTION("Microchip CSI2 Demux Controller driver");
MODULE_LICENSE("GPL v2");
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment