[PATCH] some typos

arch/mips/baget/vacserial.c

@@ -124,7 +124,7 @@ static struct timer_list vacs_timer;
  * UART
  */
 static struct serial_uart_config uart_config[] = {
-        { "unknown",  1, 0 },  /* Must go first  --  used as unasigned */
+        { "unknown",  1, 0 },  /* Must go first  --  used as unassigned */
         { "VAC UART", 1, 0 }
 }; 
 #define VAC_UART_TYPE 1   /* Just index in above array */

drivers/isdn/hisax/callc.c

@@ -1209,7 +1209,7 @@ CallcFreeChan(struct IsdnCardState *csta)
 			kfree(csta->channel[i].b_st);
 			csta->channel[i].b_st = NULL;
 		} else
-			printk(KERN_WARNING "CallcFreeChan b_st ch%d allready freed\n", i);
+			printk(KERN_WARNING "CallcFreeChan b_st ch%d already freed\n", i);
 		if (i || test_bit(FLG_TWO_DCHAN, &csta->HW_Flags)) {
 			release_d_st(csta->channel + i);
 		} else

drivers/isdn/hisax/tei.c

@@ -145,7 +145,7 @@ tei_id_request(struct FsmInst *fi, int event, void *arg)
 
 	if (st->l2.tei != -1) {
 		st->ma.tei_m.printdebug(&st->ma.tei_m,
-			"assign request for allready asigned tei %d",
+			"assign request for already assigned tei %d",
 			st->l2.tei);
 		return;
 	}

drivers/isdn/hisax/teleint.c

@@ -95,7 +95,7 @@ writefifo(unsigned int ale, unsigned int adr, u8 off, u8 * data, int size)
 	register int max_delay = 20000;
 	register int i;
 	
-	/* fifo write without cli because it's allready done  */
+	/* fifo write without cli because it's already done  */
 	byteout(ale, off);
 	for (i = 0; i<size; i++) {
 		ret = HFC_BUSY & bytein(ale);

drivers/isdn/hysdn/hycapi.c

@@ -227,7 +227,7 @@ hycapi_register_appl(struct capi_ctr *ctrl, __u16 appl,
 		return;
 	}
 	if(chk == 1) {
-		printk(KERN_INFO "HYSDN: apl %d allready registered\n", appl);
+		printk(KERN_INFO "HYSDN: apl %d already registered\n", appl);
 		return;
 	}
 	MaxBDataBlocks = rp->datablkcnt > CAPI_MAXDATAWINDOW ? CAPI_MAXDATAWINDOW : rp->datablkcnt;

drivers/media/video/zr36067.c

@@ -264,11 +264,11 @@ static void zoran_feed_stat_com(struct zoran *zr);
 /*
  *   Allocate the V4L grab buffers
  *
- *   These have to be pysically contiguous.
+ *   These have to be physically contiguous.
  *   If v4l_bufsize <= MAX_KMALLOC_MEM we use kmalloc
  *   else we try to allocate them with bigphysarea_alloc_pages
  *   if the bigphysarea patch is present in the kernel,
- *   else we try to use high memory (if the user has bootet
+ *   else we try to use high memory (if the user has booted
  *   Linux with the necessary memory left over).
  */
 
@@ -280,7 +280,7 @@ static int v4l_fbuffer_alloc(struct zoran *zr)
 	for (i = 0; i < v4l_nbufs; i++) {
 		if (zr->v4l_gbuf[i].fbuffer)
 			printk(KERN_WARNING
-			       "%s: v4l_fbuffer_alloc: buffer %d allready allocated ???\n",
+			       "%s: v4l_fbuffer_alloc: buffer %d already allocated ???\n",
 			       zr->name, i);
 
 		//udelay(20);
@@ -413,7 +413,7 @@ static int jpg_fbuffer_alloc(struct zoran *zr)
 	for (i = 0; i < zr->jpg_nbufs; i++) {
 		if (zr->jpg_gbuf[i].frag_tab)
 			printk(KERN_WARNING
-			       "%s: jpg_fbuffer_alloc: buffer %d allready allocated ???\n",
+			       "%s: jpg_fbuffer_alloc: buffer %d already allocated ???\n",
 			       zr->name, i);
 
 		/* Allocate fragment table for this buffer */
@@ -445,7 +445,7 @@ static int jpg_fbuffer_alloc(struct zoran *zr)
 			for (off = 0; off < zr->jpg_bufsize; off += PAGE_SIZE)
 				SetPageReserved(virt_to_page(mem + off));
 		} else {
-			/* jpg_bufsize is allreay page aligned */
+			/* jpg_bufsize is already page aligned */
 			for (j = 0; j < zr->jpg_bufsize / PAGE_SIZE; j++) 
 			{
 				mem = get_zeroed_page(GFP_KERNEL);
@@ -935,7 +935,7 @@ static void zr36057_overlay(struct zoran *zr, int on)
 				fmt);
 
 		/* Start and length of each line MUST be 4-byte aligned.
-		   This should be allready checked before the call to this routine.
+		   This should be already checked before the call to this routine.
 		   All error messages are internal driver checking only! */
 
 		/* video display top and bottom registers */
@@ -3242,7 +3242,7 @@ static int zoran_open(struct video_device *dev, int flags)
 	case 0:
 		if (zr->user > 1) {
 			DEBUG1(printk(KERN_WARNING
-			       "%s: zoran_open: Buz is allready in use\n",
+			       "%s: zoran_open: Buz is already in use\n",
 			       zr->name));
 			return -EBUSY;
 		}
@@ -4067,7 +4067,7 @@ static int do_zoran_ioctl(struct zoran *zr, unsigned int cmd,
 
 			if (zr->jpg_buffers_allocated) {
 				DEBUG1(printk(KERN_ERR
-				       "%s: BUZIOC_REQBUFS: buffers allready allocated\n",
+				       "%s: BUZIOC_REQBUFS: buffers already allocated\n",
 				       zr->name));
 				return -EINVAL;
 			}

drivers/serial/core.c

@@ -2023,7 +2023,7 @@ uart_configure_port(struct uart_driver *drv, struct uart_state *state,
 }
 
 /*
- * This reverses the affects of uart_configure_port, hanging up the
+ * This reverses the effects of uart_configure_port, hanging up the
  * port before removal.
  */
 static void

drivers/video/amifb.c

@@ -254,7 +254,7 @@
         moved to optimize use of dma (useful for OCS/ECS overscan displays)
       - ddfstop is ddfstrt+ddfsize-fetchsize
       - If C= didn't change anything for AGA, then at following positions the
-        dma bus is allready used:
+        dma bus is already used:
         ddfstrt <  48 -> memory refresh
                 <  96 -> disk dma
                 < 160 -> audio dma

drivers/video/fbmem.c

@@ -943,7 +943,7 @@ fb_set_var(struct fb_info *info, struct fb_var_screeninfo *var)
 int
 fb_blank(struct fb_info *info, int blank)
 {	
-	/* ??? Varible sized stack allocation.  */
+	/* ??? Variable sized stack allocation.  */
 	u16 black[info->cmap.len];
 	struct fb_cmap cmap;
 	
@@ -990,7 +990,8 @@ fb_ioctl(struct inode *inode, struct file *file, unsigned int cmd,
 			return -EFAULT;
 		return 0;
 	case FBIOGET_FSCREENINFO:
-		return copy_to_user((void *) arg, &info->fix, sizeof(fix)) ? -EFAULT : 0;
+		return copy_to_user((void *) arg, &info->fix,
+				    sizeof(fix)) ? -EFAULT : 0;
 	case FBIOPUTCMAP:
 		if (copy_from_user(&cmap, (void *) arg, sizeof(cmap)))
 			return -EFAULT;

drivers/video/stifb.c

@@ -1235,7 +1235,7 @@ stifb_init_fb(struct sti_struct *sti, int force_bpp)
 	}
 
 
-	/* get framebuffer pysical and virtual base addr & len (64bit ready) */
+	/* get framebuffer physical and virtual base addr & len (64bit ready) */
 	fix->smem_start = fb->sti->regions_phys[1] | 0xffffffff00000000;
 	fix->smem_len = fb->sti->regions[1].region_desc.length * 4096;
 

net/irda/irlmp_event.c

@@ -714,7 +714,7 @@ static int irlmp_state_dtr(struct lsap_cb *self, IRLMP_EVENT event,
 		break;
 	case LM_CONNECT_RESPONSE:
 		IRDA_DEBUG(0, "%s(), LM_CONNECT_RESPONSE, "
-			   "error, LSAP allready connected\n", __FUNCTION__);
+			   "error, LSAP already connected\n", __FUNCTION__);
 		/* Keep state */
 		break;
 	case LM_DISCONNECT_REQUEST:

scripts/fixdep.c

@@ -21,7 +21,7 @@
  *
  * If the user re-runs make *config, linux/autoconf.h will be
  * regenerated.  make notices that and will rebuild every file which
- * includes autconf.h, i.e. basically all files. This is extremely
+ * includes autoconf.h, i.e. basically all files. This is extremely
  * annoying if the user just changed CONFIG_HIS_DRIVER from n to m.
  * 
  * So we play the same trick that "mkdep" played before. We replace
@@ -72,7 +72,7 @@
  *   cmd_<target> = <cmdline>
  *
  * and then basically copies the .<target>.d file to stdout, in the
- * process filtering out the dependency on linux/autconf.h and adding
+ * process filtering out the dependency on linux/autoconf.h and adding
  * dependencies on include/config/my/option.h for every
  * CONFIG_MY_OPTION encountered in any of the prequisites.
  *