Commit 2e6fd648 authored by Alexander Aring's avatar Alexander Aring Committed by Marcel Holtmann

mrf24j40: add device-tree support

This patch adds devicetree support to mrf24j40 with proper devicetree
compatible strings.
Reviewed-by: default avatarStefan Schmidt <stefan@osg.samsung.com>
Signed-off-by: default avatarAlexander Aring <alex.aring@gmail.com>
Signed-off-by: default avatarMarcel Holtmann <marcel@holtmann.org>
parent 78aedb6b
* MRF24J40 IEEE 802.15.4 *
Required properties:
- compatible: should be "microchip,mrf24j40", "microchip,mrf24j40ma",
or "microchip,mrf24j40mc" depends on your transceiver
board
- spi-max-frequency: maximal bus speed, should be set something under or equal
10000000
- reg: the chipselect index
- interrupts: the interrupt generated by the device.
Example:
mrf24j40ma@0 {
compatible = "microchip,mrf24j40ma";
spi-max-frequency = <8500000>;
reg = <0>;
interrupts = <19 8>;
interrupt-parent = <&gpio3>;
};
......@@ -6958,6 +6958,7 @@ M: Alan Ott <alan@signal11.us>
L: linux-wpan@vger.kernel.org
S: Maintained
F: drivers/net/ieee802154/mrf24j40.c
F: Documentation/devicetree/bindings/net/ieee802154/mrf24j40.txt
MSI LAPTOP SUPPORT
M: "Lee, Chun-Yi" <jlee@suse.com>
......
......@@ -799,6 +799,14 @@ static int mrf24j40_remove(struct spi_device *spi)
return 0;
}
static const struct of_device_id mrf24j40_of_match[] = {
{ .compatible = "microchip,mrf24j40", .data = (void *)MRF24J40 },
{ .compatible = "microchip,mrf24j40ma", .data = (void *)MRF24J40MA },
{ .compatible = "microchip,mrf24j40mc", .data = (void *)MRF24J40MC },
{ },
};
MODULE_DEVICE_TABLE(of, mrf24j40_of_match);
static const struct spi_device_id mrf24j40_ids[] = {
{ "mrf24j40", MRF24J40 },
{ "mrf24j40ma", MRF24J40MA },
......@@ -809,6 +817,7 @@ MODULE_DEVICE_TABLE(spi, mrf24j40_ids);
static struct spi_driver mrf24j40_driver = {
.driver = {
.of_match_table = of_match_ptr(mrf24j40_of_match),
.name = "mrf24j40",
.owner = THIS_MODULE,
},
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment