Commit 2eb5dbdd authored by David Mosberger-Tang's avatar David Mosberger-Tang Committed by Greg Kroah-Hartman

usb: host: max3421-hcd: Use atomic bitops in lieu of bit fields

Bit fields are not MP-safe.
Signed-off-by: default avatarDavid Mosberger <davidm@egauge.net>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
parent f6d9d89f
......@@ -102,6 +102,15 @@ enum scheduling_pass {
SCHED_PASS_DONE
};
/* Bit numbers for max3421_hcd->todo: */
enum {
ENABLE_IRQ = 0,
RESET_HCD,
RESET_PORT,
CHECK_UNLINK,
IOPIN_UPDATE
};
struct max3421_dma_buf {
u8 data[2];
};
......@@ -146,11 +155,7 @@ struct max3421_hcd {
u8 hien;
u8 mode;
u8 iopins[2];
unsigned int do_enable_irq:1;
unsigned int do_reset_hcd:1;
unsigned int do_reset_port:1;
unsigned int do_check_unlink:1;
unsigned int do_iopin_update:1;
unsigned long todo;
#ifdef DEBUG
unsigned long err_stat[16];
#endif
......@@ -1165,10 +1170,8 @@ max3421_irq_handler(int irq, void *dev_id)
if (max3421_hcd->spi_thread &&
max3421_hcd->spi_thread->state != TASK_RUNNING)
wake_up_process(max3421_hcd->spi_thread);
if (!max3421_hcd->do_enable_irq) {
max3421_hcd->do_enable_irq = 1;
if (!test_and_set_bit(ENABLE_IRQ, &max3421_hcd->todo))
disable_irq_nosync(spi->irq);
}
return IRQ_HANDLED;
}
......@@ -1423,10 +1426,8 @@ max3421_spi_thread(void *dev_id)
spi_wr8(hcd, MAX3421_REG_HIEN, max3421_hcd->hien);
set_current_state(TASK_INTERRUPTIBLE);
if (max3421_hcd->do_enable_irq) {
max3421_hcd->do_enable_irq = 0;
if (test_and_clear_bit(ENABLE_IRQ, &max3421_hcd->todo))
enable_irq(spi->irq);
}
schedule();
__set_current_state(TASK_RUNNING);
}
......@@ -1440,23 +1441,18 @@ max3421_spi_thread(void *dev_id)
else if (!max3421_hcd->curr_urb)
i_worked |= max3421_select_and_start_urb(hcd);
if (max3421_hcd->do_reset_hcd) {
if (test_and_clear_bit(RESET_HCD, &max3421_hcd->todo))
/* reset the HCD: */
max3421_hcd->do_reset_hcd = 0;
i_worked |= max3421_reset_hcd(hcd);
}
if (max3421_hcd->do_reset_port) {
if (test_and_clear_bit(RESET_PORT, &max3421_hcd->todo)) {
/* perform a USB bus reset: */
max3421_hcd->do_reset_port = 0;
spi_wr8(hcd, MAX3421_REG_HCTL,
BIT(MAX3421_HCTL_BUSRST_BIT));
i_worked = 1;
}
if (max3421_hcd->do_check_unlink) {
max3421_hcd->do_check_unlink = 0;
if (test_and_clear_bit(CHECK_UNLINK, &max3421_hcd->todo))
i_worked |= max3421_check_unlink(hcd);
}
if (max3421_hcd->do_iopin_update) {
if (test_and_clear_bit(IOPIN_UPDATE, &max3421_hcd->todo)) {
/*
* IOPINS1/IOPINS2 do not auto-increment, so we can't
* use spi_wr_buf().
......@@ -1469,7 +1465,6 @@ max3421_spi_thread(void *dev_id)
spi_wr8(hcd, MAX3421_REG_IOPINS1 + i, val);
max3421_hcd->iopins[i] = val;
}
max3421_hcd->do_iopin_update = 0;
i_worked = 1;
}
}
......@@ -1485,7 +1480,7 @@ max3421_reset_port(struct usb_hcd *hcd)
max3421_hcd->port_status &= ~(USB_PORT_STAT_ENABLE |
USB_PORT_STAT_LOW_SPEED);
max3421_hcd->do_reset_port = 1;
set_bit(RESET_PORT, &max3421_hcd->todo);
wake_up_process(max3421_hcd->spi_thread);
return 0;
}
......@@ -1498,7 +1493,7 @@ max3421_reset(struct usb_hcd *hcd)
hcd->self.sg_tablesize = 0;
hcd->speed = HCD_USB2;
hcd->self.root_hub->speed = USB_SPEED_FULL;
max3421_hcd->do_reset_hcd = 1;
set_bit(RESET_HCD, &max3421_hcd->todo);
wake_up_process(max3421_hcd->spi_thread);
return 0;
}
......@@ -1590,7 +1585,7 @@ max3421_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status)
*/
retval = usb_hcd_check_unlink_urb(hcd, urb, status);
if (retval == 0) {
max3421_hcd->do_check_unlink = 1;
set_bit(CHECK_UNLINK, &max3421_hcd->todo);
wake_up_process(max3421_hcd->spi_thread);
}
spin_unlock_irqrestore(&max3421_hcd->lock, flags);
......@@ -1690,7 +1685,7 @@ max3421_gpout_set_value(struct usb_hcd *hcd, u8 pin_number, u8 value)
max3421_hcd->iopins[idx] |= mask;
else
max3421_hcd->iopins[idx] &= ~mask;
max3421_hcd->do_iopin_update = 1;
set_bit(IOPIN_UPDATE, &max3421_hcd->todo);
wake_up_process(max3421_hcd->spi_thread);
}
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment