net: qed: invoke err notify on critical areas

In a number of critical places not only debug trace should be printed,
but the appropriate hw error condition should be raised and error
handling/recovery should start.

Introduce our new qed_hw_err_notify invocation in these places to
record and indicate critical error conditions in hardware.
Signed-off-by: Ariel Elior <ariel.elior@marvell.com>
Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/ethernet/qlogic/qed/qed_dev.c

@@ -3085,7 +3085,9 @@ int qed_hw_init(struct qed_dev *cdev, struct qed_hw_init_params *p_params)
 			rc = qed_final_cleanup(p_hwfn, p_hwfn->p_main_ptt,
 					       p_hwfn->rel_pf_id, false);
 			if (rc) {
-				DP_NOTICE(p_hwfn, "Final cleanup failed\n");
+				qed_hw_err_notify(p_hwfn, p_hwfn->p_main_ptt,
+						  QED_HW_ERR_RAMROD_FAIL,
+						  "Final cleanup failed\n");
 				goto load_err;
 			}
 		}

drivers/net/ethernet/qlogic/qed/qed_hw.c

@@ -762,9 +762,10 @@ static int qed_dmae_execute_command(struct qed_hwfn *p_hwfn,
 							    dst_type,
 							    length_cur);
 		if (qed_status) {
-			DP_NOTICE(p_hwfn,
+			qed_hw_err_notify(p_hwfn, p_ptt, QED_HW_ERR_DMAE_FAIL,
 					  "qed_dmae_execute_sub_operation Failed with error 0x%x. source_addr 0x%llx, destination addr 0x%llx, size_in_dwords 0x%x\n",
-				  qed_status, src_addr, dst_addr, length_cur);
+					  qed_status, src_addr,
+					  dst_addr, length_cur);
 			break;
 		}
 	}

drivers/net/ethernet/qlogic/qed/qed_int.c

@@ -363,6 +363,14 @@ static int qed_pglueb_rbc_attn_cb(struct qed_hwfn *p_hwfn)
 	return qed_pglueb_rbc_attn_handler(p_hwfn, p_hwfn->p_dpc_ptt);
 }
 
+static int qed_fw_assertion(struct qed_hwfn *p_hwfn)
+{
+	qed_hw_err_notify(p_hwfn, p_hwfn->p_dpc_ptt, QED_HW_ERR_FW_ASSERT,
+			  "FW assertion!\n");
+
+	return -EINVAL;
+}
+
 #define QED_DORQ_ATTENTION_REASON_MASK  (0xfffff)
 #define QED_DORQ_ATTENTION_OPAQUE_MASK  (0xffff)
 #define QED_DORQ_ATTENTION_OPAQUE_SHIFT (0x0)
@@ -606,7 +614,8 @@ static struct aeu_invert_reg aeu_descs[NUM_ATTN_REGS] = {
 	{
 		{       /* After Invert 4 */
 			{"General Attention 32", ATTENTION_SINGLE,
-			 NULL, MAX_BLOCK_ID},
+			 qed_fw_assertion,
+			 MAX_BLOCK_ID},
 			{"General Attention %d",
 			 (2 << ATTENTION_LENGTH_SHIFT) |
 			 (33 << ATTENTION_OFFSET_SHIFT), NULL, MAX_BLOCK_ID},
@@ -927,9 +936,12 @@ qed_int_deassertion_aeu_bit(struct qed_hwfn *p_hwfn,
 		qed_int_attn_print(p_hwfn, p_aeu->block_index,
 				   ATTN_TYPE_INTERRUPT, !b_fatal);
 
-
-	/* If the attention is benign, no need to prevent it */
-	if (!rc)
+	/* Reach assertion if attention is fatal */
+	if (b_fatal)
+		qed_hw_err_notify(p_hwfn, p_hwfn->p_dpc_ptt, QED_HW_ERR_HW_ATTN,
+				  "`%s': Fatal attention\n",
+				  p_bit_name);
+	else /* If the attention is benign, no need to prevent it */
 		goto out;
 
 	/* Prevent this Attention from being asserted in the future */

drivers/net/ethernet/qlogic/qed/qed_mcp.c

@@ -575,6 +575,8 @@ _qed_mcp_cmd_and_union(struct qed_hwfn *p_hwfn,
 		if (!QED_MB_FLAGS_IS_SET(p_mb_params, AVOID_BLOCK))
 			qed_mcp_cmd_set_blocking(p_hwfn, true);
 
+		qed_hw_err_notify(p_hwfn, p_ptt,
+				  QED_HW_ERR_MFW_RESP_FAIL, NULL);
 		return -EAGAIN;
 	}
 

drivers/net/ethernet/qlogic/qed/qed_spq.c

@@ -160,12 +160,16 @@ static int qed_spq_block(struct qed_hwfn *p_hwfn,
 		return 0;
 	}
 err:
-	DP_NOTICE(p_hwfn,
+	p_ptt = qed_ptt_acquire(p_hwfn);
+	if (!p_ptt)
+		return -EBUSY;
+	qed_hw_err_notify(p_hwfn, p_ptt, QED_HW_ERR_RAMROD_FAIL,
 			  "Ramrod is stuck [CID %08x cmd %02x protocol %02x echo %04x]\n",
 			  le32_to_cpu(p_ent->elem.hdr.cid),
 			  p_ent->elem.hdr.cmd_id,
 			  p_ent->elem.hdr.protocol_id,
 			  le16_to_cpu(p_ent->elem.hdr.echo));
+	qed_ptt_release(p_hwfn, p_ptt);
 
 	return -EBUSY;
 }