Skip to content

L
linux
Commit 2ec67971 authored by Andy Lutomirski's avatar Andy Lutomirski Committed by Ingo Molnar
Browse files
Options

x86/entry/64/compat: Remove most of the fast system call machinery 

We now have only one code path that calls through the compat
syscall table.  This will make it much more pleasant to change
the pt_regs vs register calling convention, which we need to do
to move the call into C.
Signed-off-by: default avatarAndy Lutomirski <luto@kernel.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Link: http://lkml.kernel.org/r/320cda5573cefdc601b955d23fbe8f36c085432d.1444091584.git.luto@kernel.orgSigned-off-by: default avatarIngo Molnar <mingo@kernel.org>
parent c5f638ac
Show whitespace changes
Inline Side-by-side
Showing with 4 additions and 242 deletions
arch/x86/entry/entry_64_compat.S
View file @ 2ec67971
......@@ -101,119 +101,13 @@ sysenter_flags_fixed:
movl $11, %edi
call do_exit
/*
* Re-enable interrupts. IRQ tracing already thinks that IRQs are
* on (since we treat user mode as having IRQs on), and the
* prologue above is too short for it to be worth adding a
* tracing round trip.
*/
ENABLE_INTERRUPTS(CLBR_NONE)
/*
* No need to do an access_ok() check here because RBP has been
* 32-bit zero extended:
*/
ASM_STAC
1: movl (%rbp), %ebp
_ASM_EXTABLE(1b, ia32_badarg)
ASM_CLAC
orl $TS_COMPAT, ASM_THREAD_INFO(TI_status, %rsp, SIZEOF_PTREGS)
testl $_TIF_WORK_SYSCALL_ENTRY, ASM_THREAD_INFO(TI_flags, %rsp, SIZEOF_PTREGS)
jnz sysenter_tracesys
sysenter_do_call:
/* 32-bit syscall -> 64-bit C ABI argument conversion */
movl %edi, %r8d /* arg5 */
movl %ebp, %r9d /* arg6 */
xchg %ecx, %esi /* rsi:arg2, rcx:arg4 */
movl %ebx, %edi /* arg1 */
movl %edx, %edx /* arg3 (zero extension) */
sysenter_dispatch:
cmpq $(IA32_NR_syscalls-1), %rax
ja 1f
call *ia32_sys_call_table(, %rax, 8)
movq %rax, RAX(%rsp)
1:
DISABLE_INTERRUPTS(CLBR_NONE)
TRACE_IRQS_OFF
testl $_TIF_ALLWORK_MASK, ASM_THREAD_INFO(TI_flags, %rsp, SIZEOF_PTREGS)
jnz ia32_ret_from_sys_call_irqs_off
sysexit_from_sys_call:
/*
* NB: SYSEXIT is not obviously safe for 64-bit kernels -- an
* NMI between STI and SYSEXIT has poorly specified behavior,
* and and NMI followed by an IRQ with usergs is fatal. So
* we just pretend we're using SYSEXIT but we really use
* SYSRETL instead.
*
* This code path is still called 'sysexit' because it pairs
* with 'sysenter' and it uses the SYSENTER calling convention.
*/
andl $~TS_COMPAT, ASM_THREAD_INFO(TI_status, %rsp, SIZEOF_PTREGS)
movl RIP(%rsp), %ecx /* User %eip */
movq RAX(%rsp), %rax
movl RSI(%rsp), %esi
movl RDI(%rsp), %edi
xorl %edx, %edx /* Do not leak kernel information */
xorq %r8, %r8
xorq %r9, %r9
xorq %r10, %r10
movl EFLAGS(%rsp), %r11d /* User eflags */
TRACE_IRQS_ON
/*
* SYSRETL works even on Intel CPUs. Use it in preference to SYSEXIT,
* since it avoids a dicey window with interrupts enabled.
*/
movl RSP(%rsp), %esp
/*
* USERGS_SYSRET32 does:
* gsbase = user's gs base
* eip = ecx
* rflags = r11
* cs = __USER32_CS
* ss = __USER_DS
*
* The prologue set RIP(%rsp) to VDSO32_SYSENTER_RETURN, which does:
*
* pop %ebp
* pop %edx
* pop %ecx
*
* Therefore, we invoke SYSRETL with EDX and R8-R10 zeroed to
* avoid info leaks. R11 ends up with VDSO32_SYSENTER_RETURN's
* address (already known to user code), and R12-R15 are
* callee-saved and therefore don't contain any interesting
* kernel data.
*/
USERGS_SYSRET32
/* Unreachable. */
ud2
sysenter_fix_flags:
pushq $X86_EFLAGS_FIXED
popfq
jmp sysenter_flags_fixed
sysenter_tracesys:
SAVE_EXTRA_REGS
xorl %eax, %eax /* Do not leak kernel information */
movq %rax, R11(%rsp)
movq %rax, R10(%rsp)
movq %rax, R9(%rsp)
movq %rax, R8(%rsp)
movq %rsp, %rdi /* &pt_regs -> arg1 */
call syscall_trace_enter
/* Reload arg registers from stack. (see sysenter_tracesys) */
movl RCX(%rsp), %ecx
movl RDX(%rsp), %edx
movl RSI(%rsp), %esi
movl RDI(%rsp), %edi
movl %eax, %eax /* zero extension */
RESTORE_EXTRA_REGS
jmp sysenter_do_call
ENDPROC(entry_SYSENTER_compat)
/*
......@@ -280,142 +174,10 @@ ENTRY(entry_SYSCALL_compat)
pushq $-ENOSYS /* pt_regs->ax */
sub $(10*8), %rsp /* pt_regs->r8-11, bp, bx, r12-15 not saved */
/*
* No need to do an access_ok check here because r8 has been
* 32-bit zero extended:
*/
ASM_STAC
1: movl (%r8), %r9d
_ASM_EXTABLE(1b, ia32_badarg)
ASM_CLAC
orl $TS_COMPAT, ASM_THREAD_INFO(TI_status, %rsp, SIZEOF_PTREGS)
testl $_TIF_WORK_SYSCALL_ENTRY, ASM_THREAD_INFO(TI_flags, %rsp, SIZEOF_PTREGS)
jnz cstar_tracesys
cstar_do_call:
/* 32-bit syscall -> 64-bit C ABI argument conversion */
movl %edi, %r8d /* arg5 */
/* r9 already loaded */ /* arg6 */
xchg %ecx, %esi /* rsi:arg2, rcx:arg4 */
movl %ebx, %edi /* arg1 */
movl %edx, %edx /* arg3 (zero extension) */
cstar_dispatch:
cmpq $(IA32_NR_syscalls-1), %rax
ja 1f
call *ia32_sys_call_table(, %rax, 8)
movq %rax, RAX(%rsp)
1:
DISABLE_INTERRUPTS(CLBR_NONE)
TRACE_IRQS_OFF
testl $_TIF_ALLWORK_MASK, ASM_THREAD_INFO(TI_flags, %rsp, SIZEOF_PTREGS)
jnz ia32_ret_from_sys_call_irqs_off
sysretl_from_sys_call:
andl $~TS_COMPAT, ASM_THREAD_INFO(TI_status, %rsp, SIZEOF_PTREGS)
movl RDX(%rsp), %edx
movl RSI(%rsp), %esi
movl RDI(%rsp), %edi
movl RIP(%rsp), %ecx
movl EFLAGS(%rsp), %r11d
movq RAX(%rsp), %rax
xorq %r10, %r10
xorq %r9, %r9
xorq %r8, %r8
TRACE_IRQS_ON
movl RSP(%rsp), %esp
/*
* 64-bit->32-bit SYSRET restores eip from ecx,
* eflags from r11 (but RF and VM bits are forced to 0),
* cs and ss are loaded from MSRs.
* (Note: 32-bit->32-bit SYSRET is different: since r11
* does not exist, it merely sets eflags.IF=1).
*
* NB: On AMD CPUs with the X86_BUG_SYSRET_SS_ATTRS bug, the ss
* descriptor is not reinitialized. This means that we must
* avoid SYSRET with SS == NULL, which could happen if we schedule,
* exit the kernel, and re-enter using an interrupt vector. (All
* interrupt entries on x86_64 set SS to NULL.) We prevent that
* from happening by reloading SS in __switch_to.
*/
USERGS_SYSRET32
cstar_tracesys:
xchgl %r9d, %ebp
SAVE_EXTRA_REGS
xorl %eax, %eax /* Do not leak kernel information */
movq %rax, R11(%rsp)
movq %rax, R10(%rsp)
movq %r9, R9(%rsp)
movq %rax, R8(%rsp)
movq %rsp, %rdi /* &pt_regs -> arg1 */
call syscall_trace_enter
movl R9(%rsp), %r9d
/* Reload arg registers from stack. (see sysenter_tracesys) */
movl RCX(%rsp), %ecx
movl RDX(%rsp), %edx
movl RSI(%rsp), %esi
movl RDI(%rsp), %edi
movl %eax, %eax /* zero extension */
RESTORE_EXTRA_REGS
xchgl %ebp, %r9d
jmp cstar_do_call
/* Unreachable. */
ud2
END(entry_SYSCALL_compat)
ia32_badarg:
/*
* So far, we've entered kernel mode, set AC, turned on IRQs, and
* saved C regs except r8-r11. We haven't done any of the other
* standard entry work, though. We want to bail, but we shouldn't
* treat this as a syscall entry since we don't even know what the
* args are. Instead, treat this as a non-syscall entry, finish
* the entry work, and immediately exit after setting AX = -EFAULT.
*
* We're really just being polite here. Killing the task outright
* would be a reasonable action, too. Given that the only valid
* way to have gotten here is through the vDSO, and we already know
* that the stack pointer is bad, the task isn't going to survive
* for long no matter what we do.
*/
ASM_CLAC /* undo STAC */
movq $-EFAULT, RAX(%rsp) /* return -EFAULT if possible */
/* Fill in the rest of pt_regs */
xorl %eax, %eax
movq %rax, R11(%rsp)
movq %rax, R10(%rsp)
movq %rax, R9(%rsp)
movq %rax, R8(%rsp)
SAVE_EXTRA_REGS
/* Turn IRQs back off. */
DISABLE_INTERRUPTS(CLBR_NONE)
TRACE_IRQS_OFF
/* Now finish entering normal kernel mode. */
#ifdef CONFIG_CONTEXT_TRACKING
call enter_from_user_mode
#endif
/* And exit again. */
jmp retint_user
ia32_ret_from_sys_call_irqs_off:
TRACE_IRQS_ON
ENABLE_INTERRUPTS(CLBR_NONE)
ia32_ret_from_sys_call:
xorl %eax, %eax /* Do not leak kernel information */
movq %rax, R11(%rsp)
movq %rax, R10(%rsp)
movq %rax, R9(%rsp)
movq %rax, R8(%rsp)
jmp int_ret_from_sys_call
/*
* Emulated IA32 system calls via int 0x80.
*
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7