Merge tag 'drm-intel-fixes-2013-10-29' of...

Merge tag 'drm-intel-fixes-2013-10-29' of git://people.freedesktop.org/~danvet/drm-intel into drm-fixes

Regression and warn fixes for i915.

* tag 'drm-intel-fixes-2013-10-29' of git://people.freedesktop.org/~danvet/drm-intel:
  drm/i915: Fix the PPT fdi lane bifurcate state handling on ivb
  drm/i915: No LVDS hardware on Intel D410PT and D425KT
  drm/i915/dp: workaround BIOS eDP bpp clamping issue
  drm/i915: Add HSW CRT output readout support
  drm/i915: Add support for pipe_bpp readout

drivers/gpu/drm/i915/intel_crt.c

@@ -83,8 +83,7 @@ static bool intel_crt_get_hw_state(struct intel_encoder *encoder,
 	return true;
 }
 
-static void intel_crt_get_config(struct intel_encoder *encoder,
-				 struct intel_crtc_config *pipe_config)
+static unsigned int intel_crt_get_flags(struct intel_encoder *encoder)
 {
 	struct drm_i915_private *dev_priv = encoder->base.dev->dev_private;
 	struct intel_crt *crt = intel_encoder_to_crt(encoder);
@@ -102,7 +101,27 @@ static void intel_crt_get_config(struct intel_encoder *encoder,
 	else
 		flags |= DRM_MODE_FLAG_NVSYNC;
 
-	pipe_config->adjusted_mode.flags |= flags;
+	return flags;
+}
+
+static void intel_crt_get_config(struct intel_encoder *encoder,
+				 struct intel_crtc_config *pipe_config)
+{
+	struct drm_device *dev = encoder->base.dev;
+
+	pipe_config->adjusted_mode.flags |= intel_crt_get_flags(encoder);
+}
+
+static void hsw_crt_get_config(struct intel_encoder *encoder,
+			       struct intel_crtc_config *pipe_config)
+{
+	intel_ddi_get_config(encoder, pipe_config);
+
+	pipe_config->adjusted_mode.flags &= ~(DRM_MODE_FLAG_PHSYNC |
+					      DRM_MODE_FLAG_NHSYNC |
+					      DRM_MODE_FLAG_PVSYNC |
+					      DRM_MODE_FLAG_NVSYNC);
+	pipe_config->adjusted_mode.flags |= intel_crt_get_flags(encoder);
 }
 
 /* Note: The caller is required to filter out dpms modes not supported by the
@@ -799,6 +818,9 @@ void intel_crt_init(struct drm_device *dev)
 	crt->base.mode_set = intel_crt_mode_set;
 	crt->base.disable = intel_disable_crt;
 	crt->base.enable = intel_enable_crt;
+	if (IS_HASWELL(dev))
+		crt->base.get_config = hsw_crt_get_config;
+	else
 		crt->base.get_config = intel_crt_get_config;
 	if (I915_HAS_HOTPLUG(dev))
 		crt->base.hpd_pin = HPD_CRT;

drivers/gpu/drm/i915/intel_ddi.c

@@ -1249,7 +1249,7 @@ static void intel_ddi_hot_plug(struct intel_encoder *intel_encoder)
 		intel_dp_check_link_status(intel_dp);
 }
 
-static void intel_ddi_get_config(struct intel_encoder *encoder,
+void intel_ddi_get_config(struct intel_encoder *encoder,
 			  struct intel_crtc_config *pipe_config)
 {
 	struct drm_i915_private *dev_priv = encoder->base.dev->dev_private;
@@ -1268,6 +1268,23 @@ static void intel_ddi_get_config(struct intel_encoder *encoder,
 		flags |= DRM_MODE_FLAG_NVSYNC;
 
 	pipe_config->adjusted_mode.flags |= flags;
+
+	switch (temp & TRANS_DDI_BPC_MASK) {
+	case TRANS_DDI_BPC_6:
+		pipe_config->pipe_bpp = 18;
+		break;
+	case TRANS_DDI_BPC_8:
+		pipe_config->pipe_bpp = 24;
+		break;
+	case TRANS_DDI_BPC_10:
+		pipe_config->pipe_bpp = 30;
+		break;
+	case TRANS_DDI_BPC_12:
+		pipe_config->pipe_bpp = 36;
+		break;
+	default:
+		break;
+	}
 }
 
 static void intel_ddi_destroy(struct drm_encoder *encoder)

drivers/gpu/drm/i915/intel_display.c

@@ -2327,9 +2327,10 @@ static void intel_fdi_normal_train(struct drm_crtc *crtc)
 			   FDI_FE_ERRC_ENABLE);
 }
 
-static bool pipe_has_enabled_pch(struct intel_crtc *intel_crtc)
+static bool pipe_has_enabled_pch(struct intel_crtc *crtc)
 {
-	return intel_crtc->base.enabled && intel_crtc->config.has_pch_encoder;
+	return crtc->base.enabled && crtc->active &&
+		crtc->config.has_pch_encoder;
 }
 
 static void ivb_modeset_global_resources(struct drm_device *dev)
@@ -2979,6 +2980,48 @@ static void ironlake_pch_transcoder_set_timings(struct intel_crtc *crtc,
 		   I915_READ(VSYNCSHIFT(cpu_transcoder)));
 }
 
+static void cpt_enable_fdi_bc_bifurcation(struct drm_device *dev)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	uint32_t temp;
+
+	temp = I915_READ(SOUTH_CHICKEN1);
+	if (temp & FDI_BC_BIFURCATION_SELECT)
+		return;
+
+	WARN_ON(I915_READ(FDI_RX_CTL(PIPE_B)) & FDI_RX_ENABLE);
+	WARN_ON(I915_READ(FDI_RX_CTL(PIPE_C)) & FDI_RX_ENABLE);
+
+	temp |= FDI_BC_BIFURCATION_SELECT;
+	DRM_DEBUG_KMS("enabling fdi C rx\n");
+	I915_WRITE(SOUTH_CHICKEN1, temp);
+	POSTING_READ(SOUTH_CHICKEN1);
+}
+
+static void ivybridge_update_fdi_bc_bifurcation(struct intel_crtc *intel_crtc)
+{
+	struct drm_device *dev = intel_crtc->base.dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+
+	switch (intel_crtc->pipe) {
+	case PIPE_A:
+		break;
+	case PIPE_B:
+		if (intel_crtc->config.fdi_lanes > 2)
+			WARN_ON(I915_READ(SOUTH_CHICKEN1) & FDI_BC_BIFURCATION_SELECT);
+		else
+			cpt_enable_fdi_bc_bifurcation(dev);
+
+		break;
+	case PIPE_C:
+		cpt_enable_fdi_bc_bifurcation(dev);
+
+		break;
+	default:
+		BUG();
+	}
+}
+
 /*
  * Enable PCH resources required for PCH ports:
  *   - PCH PLLs
@@ -2997,6 +3040,9 @@ static void ironlake_pch_enable(struct drm_crtc *crtc)
 
 	assert_pch_transcoder_disabled(dev_priv, pipe);
 
+	if (IS_IVYBRIDGE(dev))
+		ivybridge_update_fdi_bc_bifurcation(intel_crtc);
+
 	/* Write the TU size bits before fdi link training, so that error
 	 * detection works. */
 	I915_WRITE(FDI_RX_TUSIZE1(pipe),
@@ -4983,6 +5029,22 @@ static bool i9xx_get_pipe_config(struct intel_crtc *crtc,
 	if (!(tmp & PIPECONF_ENABLE))
 		return false;
 
+	if (IS_G4X(dev) || IS_VALLEYVIEW(dev)) {
+		switch (tmp & PIPECONF_BPC_MASK) {
+		case PIPECONF_6BPC:
+			pipe_config->pipe_bpp = 18;
+			break;
+		case PIPECONF_8BPC:
+			pipe_config->pipe_bpp = 24;
+			break;
+		case PIPECONF_10BPC:
+			pipe_config->pipe_bpp = 30;
+			break;
+		default:
+			break;
+		}
+	}
+
 	intel_get_pipe_timings(crtc, pipe_config);
 
 	i9xx_get_pfit_config(crtc, pipe_config);
@@ -5576,48 +5638,6 @@ static bool ironlake_compute_clocks(struct drm_crtc *crtc,
 	return true;
 }
 
-static void cpt_enable_fdi_bc_bifurcation(struct drm_device *dev)
-{
-	struct drm_i915_private *dev_priv = dev->dev_private;
-	uint32_t temp;
-
-	temp = I915_READ(SOUTH_CHICKEN1);
-	if (temp & FDI_BC_BIFURCATION_SELECT)
-		return;
-
-	WARN_ON(I915_READ(FDI_RX_CTL(PIPE_B)) & FDI_RX_ENABLE);
-	WARN_ON(I915_READ(FDI_RX_CTL(PIPE_C)) & FDI_RX_ENABLE);
-
-	temp |= FDI_BC_BIFURCATION_SELECT;
-	DRM_DEBUG_KMS("enabling fdi C rx\n");
-	I915_WRITE(SOUTH_CHICKEN1, temp);
-	POSTING_READ(SOUTH_CHICKEN1);
-}
-
-static void ivybridge_update_fdi_bc_bifurcation(struct intel_crtc *intel_crtc)
-{
-	struct drm_device *dev = intel_crtc->base.dev;
-	struct drm_i915_private *dev_priv = dev->dev_private;
-
-	switch (intel_crtc->pipe) {
-	case PIPE_A:
-		break;
-	case PIPE_B:
-		if (intel_crtc->config.fdi_lanes > 2)
-			WARN_ON(I915_READ(SOUTH_CHICKEN1) & FDI_BC_BIFURCATION_SELECT);
-		else
-			cpt_enable_fdi_bc_bifurcation(dev);
-
-		break;
-	case PIPE_C:
-		cpt_enable_fdi_bc_bifurcation(dev);
-
-		break;
-	default:
-		BUG();
-	}
-}
-
 int ironlake_get_lanes_required(int target_clock, int link_bw, int bpp)
 {
 	/*
@@ -5811,9 +5831,6 @@ static int ironlake_crtc_mode_set(struct drm_crtc *crtc,
 					     &intel_crtc->config.fdi_m_n);
 	}
 
-	if (IS_IVYBRIDGE(dev))
-		ivybridge_update_fdi_bc_bifurcation(intel_crtc);
-
 	ironlake_set_pipeconf(crtc);
 
 	/* Set up the display plane register */
@@ -5881,6 +5898,23 @@ static bool ironlake_get_pipe_config(struct intel_crtc *crtc,
 	if (!(tmp & PIPECONF_ENABLE))
 		return false;
 
+	switch (tmp & PIPECONF_BPC_MASK) {
+	case PIPECONF_6BPC:
+		pipe_config->pipe_bpp = 18;
+		break;
+	case PIPECONF_8BPC:
+		pipe_config->pipe_bpp = 24;
+		break;
+	case PIPECONF_10BPC:
+		pipe_config->pipe_bpp = 30;
+		break;
+	case PIPECONF_12BPC:
+		pipe_config->pipe_bpp = 36;
+		break;
+	default:
+		break;
+	}
+
 	if (I915_READ(PCH_TRANSCONF(crtc->pipe)) & TRANS_ENABLE) {
 		struct intel_shared_dpll *pll;
 
@@ -8612,6 +8646,9 @@ intel_pipe_config_compare(struct drm_device *dev,
 	PIPE_CONF_CHECK_X(dpll_hw_state.fp0);
 	PIPE_CONF_CHECK_X(dpll_hw_state.fp1);
 
+	if (IS_G4X(dev) || INTEL_INFO(dev)->gen >= 5)
+		PIPE_CONF_CHECK_I(pipe_bpp);
+
 #undef PIPE_CONF_CHECK_X
 #undef PIPE_CONF_CHECK_I
 #undef PIPE_CONF_CHECK_FLAGS

drivers/gpu/drm/i915/intel_dp.c

@@ -1401,6 +1401,26 @@ static void intel_dp_get_config(struct intel_encoder *encoder,
 		else
 			pipe_config->port_clock = 270000;
 	}
+
+	if (is_edp(intel_dp) && dev_priv->vbt.edp_bpp &&
+	    pipe_config->pipe_bpp > dev_priv->vbt.edp_bpp) {
+		/*
+		 * This is a big fat ugly hack.
+		 *
+		 * Some machines in UEFI boot mode provide us a VBT that has 18
+		 * bpp and 1.62 GHz link bandwidth for eDP, which for reasons
+		 * unknown we fail to light up. Yet the same BIOS boots up with
+		 * 24 bpp and 2.7 GHz link. Use the same bpp as the BIOS uses as
+		 * max, not what it tells us to use.
+		 *
+		 * Note: This will still be broken if the eDP panel is not lit
+		 * up by the BIOS, and thus we can't get the mode at module
+		 * load.
+		 */
+		DRM_DEBUG_KMS("pipe has %d bpp for eDP panel, overriding BIOS-provided max %d bpp\n",
+			      pipe_config->pipe_bpp, dev_priv->vbt.edp_bpp);
+		dev_priv->vbt.edp_bpp = pipe_config->pipe_bpp;
+	}
 }
 
 static bool is_edp_psr(struct intel_dp *intel_dp)

drivers/gpu/drm/i915/intel_drv.h

@@ -765,6 +765,8 @@ extern void intel_ddi_prepare_link_retrain(struct drm_encoder *encoder);
 extern bool
 intel_ddi_connector_get_hw_state(struct intel_connector *intel_connector);
 extern void intel_ddi_fdi_disable(struct drm_crtc *crtc);
+extern void intel_ddi_get_config(struct intel_encoder *encoder,
+				 struct intel_crtc_config *pipe_config);
 
 extern void intel_display_handle_reset(struct drm_device *dev);
 extern bool intel_set_cpu_fifo_underrun_reporting(struct drm_device *dev,

drivers/gpu/drm/i915/intel_lvds.c

@@ -698,6 +698,22 @@ static const struct dmi_system_id intel_no_lvds[] = {
 			DMI_MATCH(DMI_PRODUCT_NAME, "ESPRIMO Q900"),
 		},
 	},
+	{
+		.callback = intel_no_lvds_dmi_callback,
+		.ident = "Intel D410PT",
+		.matches = {
+			DMI_MATCH(DMI_BOARD_VENDOR, "Intel"),
+			DMI_MATCH(DMI_BOARD_NAME, "D410PT"),
+		},
+	},
+	{
+		.callback = intel_no_lvds_dmi_callback,
+		.ident = "Intel D425KT",
+		.matches = {
+			DMI_MATCH(DMI_BOARD_VENDOR, "Intel"),
+			DMI_EXACT_MATCH(DMI_BOARD_NAME, "D425KT"),
+		},
+	},
 	{
 		.callback = intel_no_lvds_dmi_callback,
 		.ident = "Intel D510MO",