Commit 2fe0e876 authored by Frank Rowand's avatar Frank Rowand

of: overlay: check prevents multiple fragments touching same property

Add test case of two fragments updating the same property.  After
adding the test case, the system hangs at end of boot, after
after slub stack dumps from kfree() in crypto modprobe code.

Multiple overlay fragments adding, modifying, or deleting the same
property is not supported.  Add check to detect the attempt and fail
the overlay apply.

Before this patch, the first fragment error would terminate
processing.  Allow fragment checking to proceed and report all
of the fragment errors before terminating the overlay apply. This
is not a hot path, thus not a performance issue (the error is not
transient and requires fixing the overlay before attempting to
apply it again).

After applying this patch, the devicetree unittest messages will
include:

   OF: overlay: ERROR: multiple fragments add, update, and/or delete property /testcase-data-2/substation@100/motor-1/rpm_avail

   ...

   ### dt-test ### end of unittest - 212 passed, 0 failed

The check to detect two fragments updating the same property is
folded into the patch that created the test case to maintain
bisectability.
Tested-by: default avatarAlan Tull <atull@kernel.org>
Signed-off-by: default avatarFrank Rowand <frank.rowand@sony.com>
parent c168263b
...@@ -508,54 +508,98 @@ static int build_changeset_symbols_node(struct overlay_changeset *ovcs, ...@@ -508,54 +508,98 @@ static int build_changeset_symbols_node(struct overlay_changeset *ovcs,
return 0; return 0;
} }
/** static int find_dup_cset_node_entry(struct overlay_changeset *ovcs,
* check_changeset_dup_add_node() - changeset validation: duplicate add node struct of_changeset_entry *ce_1)
* @ovcs: Overlay changeset
*
* Check changeset @ovcs->cset for multiple add node entries for the same
* node.
*
* Returns 0 on success, -ENOMEM if memory allocation failure, or -EINVAL if
* invalid overlay in @ovcs->fragments[].
*/
static int check_changeset_dup_add_node(struct overlay_changeset *ovcs)
{ {
struct of_changeset_entry *ce_1, *ce_2; struct of_changeset_entry *ce_2;
char *fn_1, *fn_2; char *fn_1, *fn_2;
int name_match; int node_path_match;
list_for_each_entry(ce_1, &ovcs->cset.entries, node) {
if (ce_1->action == OF_RECONFIG_ATTACH_NODE || if (ce_1->action != OF_RECONFIG_ATTACH_NODE &&
ce_1->action == OF_RECONFIG_DETACH_NODE) { ce_1->action != OF_RECONFIG_DETACH_NODE)
return 0;
ce_2 = ce_1; ce_2 = ce_1;
list_for_each_entry_continue(ce_2, &ovcs->cset.entries, node) { list_for_each_entry_continue(ce_2, &ovcs->cset.entries, node) {
if (ce_2->action == OF_RECONFIG_ATTACH_NODE || if ((ce_2->action != OF_RECONFIG_ATTACH_NODE &&
ce_2->action == OF_RECONFIG_DETACH_NODE) { ce_2->action != OF_RECONFIG_DETACH_NODE) ||
/* inexpensive name compare */ of_node_cmp(ce_1->np->full_name, ce_2->np->full_name))
if (!of_node_cmp(ce_1->np->full_name, continue;
ce_2->np->full_name)) {
/* expensive full path name compare */
fn_1 = kasprintf(GFP_KERNEL, "%pOF", ce_1->np); fn_1 = kasprintf(GFP_KERNEL, "%pOF", ce_1->np);
fn_2 = kasprintf(GFP_KERNEL, "%pOF", ce_2->np); fn_2 = kasprintf(GFP_KERNEL, "%pOF", ce_2->np);
name_match = !strcmp(fn_1, fn_2); node_path_match = !strcmp(fn_1, fn_2);
kfree(fn_1); kfree(fn_1);
kfree(fn_2); kfree(fn_2);
if (name_match) { if (node_path_match) {
pr_err("ERROR: multiple overlay fragments add and/or delete node %pOF\n", pr_err("ERROR: multiple fragments add and/or delete node %pOF\n",
ce_1->np); ce_1->np);
return -EINVAL; return -EINVAL;
} }
} }
}
} return 0;
}
static int find_dup_cset_prop(struct overlay_changeset *ovcs,
struct of_changeset_entry *ce_1)
{
struct of_changeset_entry *ce_2;
char *fn_1, *fn_2;
int node_path_match;
if (ce_1->action != OF_RECONFIG_ADD_PROPERTY &&
ce_1->action != OF_RECONFIG_REMOVE_PROPERTY &&
ce_1->action != OF_RECONFIG_UPDATE_PROPERTY)
return 0;
ce_2 = ce_1;
list_for_each_entry_continue(ce_2, &ovcs->cset.entries, node) {
if ((ce_2->action != OF_RECONFIG_ADD_PROPERTY &&
ce_2->action != OF_RECONFIG_REMOVE_PROPERTY &&
ce_2->action != OF_RECONFIG_UPDATE_PROPERTY) ||
of_node_cmp(ce_1->np->full_name, ce_2->np->full_name))
continue;
fn_1 = kasprintf(GFP_KERNEL, "%pOF", ce_1->np);
fn_2 = kasprintf(GFP_KERNEL, "%pOF", ce_2->np);
node_path_match = !strcmp(fn_1, fn_2);
kfree(fn_1);
kfree(fn_2);
if (node_path_match &&
!of_prop_cmp(ce_1->prop->name, ce_2->prop->name)) {
pr_err("ERROR: multiple fragments add, update, and/or delete property %pOF/%s\n",
ce_1->np, ce_1->prop->name);
return -EINVAL;
} }
} }
return 0; return 0;
} }
/**
* changeset_dup_entry_check() - check for duplicate entries
* @ovcs: Overlay changeset
*
* Check changeset @ovcs->cset for multiple {add or delete} node entries for
* the same node or duplicate {add, delete, or update} properties entries
* for the same property.
*
* Returns 0 on success, or -EINVAL if duplicate changeset entry found.
*/
static int changeset_dup_entry_check(struct overlay_changeset *ovcs)
{
struct of_changeset_entry *ce_1;
int dup_entry = 0;
list_for_each_entry(ce_1, &ovcs->cset.entries, node) {
dup_entry |= find_dup_cset_node_entry(ovcs, ce_1);
dup_entry |= find_dup_cset_prop(ovcs, ce_1);
}
return dup_entry ? -EINVAL : 0;
}
/** /**
* build_changeset() - populate overlay changeset in @ovcs from @ovcs->fragments * build_changeset() - populate overlay changeset in @ovcs from @ovcs->fragments
* @ovcs: Overlay changeset * @ovcs: Overlay changeset
...@@ -611,7 +655,7 @@ static int build_changeset(struct overlay_changeset *ovcs) ...@@ -611,7 +655,7 @@ static int build_changeset(struct overlay_changeset *ovcs)
} }
} }
return check_changeset_dup_add_node(ovcs); return changeset_dup_entry_check(ovcs);
} }
/* /*
......
...@@ -18,6 +18,7 @@ obj-$(CONFIG_OF_OVERLAY) += overlay.dtb.o \ ...@@ -18,6 +18,7 @@ obj-$(CONFIG_OF_OVERLAY) += overlay.dtb.o \
overlay_13.dtb.o \ overlay_13.dtb.o \
overlay_15.dtb.o \ overlay_15.dtb.o \
overlay_bad_add_dup_node.dtb.o \ overlay_bad_add_dup_node.dtb.o \
overlay_bad_add_dup_prop.dtb.o \
overlay_bad_phandle.dtb.o \ overlay_bad_phandle.dtb.o \
overlay_bad_symbol.dtb.o \ overlay_bad_symbol.dtb.o \
overlay_base.dtb.o overlay_base.dtb.o
......
// SPDX-License-Identifier: GPL-2.0
/dts-v1/;
/plugin/;
/*
* &electric_1/motor-1 and &spin_ctrl_1 are the same node:
* /testcase-data-2/substation@100/motor-1
*
* Thus the property "rpm_avail" in each fragment will
* result in an attempt to update the same property twice.
* This will result in an error and the overlay apply
* will fail.
*/
&electric_1 {
motor-1 {
rpm_avail = < 100 >;
};
};
&spin_ctrl_1 {
rpm_avail = < 100 200 >;
};
...@@ -30,6 +30,7 @@ hvac_1: hvac-medium-1 { ...@@ -30,6 +30,7 @@ hvac_1: hvac-medium-1 {
spin_ctrl_1: motor-1 { spin_ctrl_1: motor-1 {
compatible = "ot,ferris-wheel-motor"; compatible = "ot,ferris-wheel-motor";
spin = "clockwise"; spin = "clockwise";
rpm_avail = < 50 >;
}; };
spin_ctrl_2: motor-8 { spin_ctrl_2: motor-8 {
......
...@@ -2162,6 +2162,7 @@ OVERLAY_INFO_EXTERN(overlay_12); ...@@ -2162,6 +2162,7 @@ OVERLAY_INFO_EXTERN(overlay_12);
OVERLAY_INFO_EXTERN(overlay_13); OVERLAY_INFO_EXTERN(overlay_13);
OVERLAY_INFO_EXTERN(overlay_15); OVERLAY_INFO_EXTERN(overlay_15);
OVERLAY_INFO_EXTERN(overlay_bad_add_dup_node); OVERLAY_INFO_EXTERN(overlay_bad_add_dup_node);
OVERLAY_INFO_EXTERN(overlay_bad_add_dup_prop);
OVERLAY_INFO_EXTERN(overlay_bad_phandle); OVERLAY_INFO_EXTERN(overlay_bad_phandle);
OVERLAY_INFO_EXTERN(overlay_bad_symbol); OVERLAY_INFO_EXTERN(overlay_bad_symbol);
...@@ -2185,6 +2186,7 @@ static struct overlay_info overlays[] = { ...@@ -2185,6 +2186,7 @@ static struct overlay_info overlays[] = {
OVERLAY_INFO(overlay_13, 0), OVERLAY_INFO(overlay_13, 0),
OVERLAY_INFO(overlay_15, 0), OVERLAY_INFO(overlay_15, 0),
OVERLAY_INFO(overlay_bad_add_dup_node, -EINVAL), OVERLAY_INFO(overlay_bad_add_dup_node, -EINVAL),
OVERLAY_INFO(overlay_bad_add_dup_prop, -EINVAL),
OVERLAY_INFO(overlay_bad_phandle, -EINVAL), OVERLAY_INFO(overlay_bad_phandle, -EINVAL),
OVERLAY_INFO(overlay_bad_symbol, -EINVAL), OVERLAY_INFO(overlay_bad_symbol, -EINVAL),
{} {}
...@@ -2435,6 +2437,9 @@ static __init void of_unittest_overlay_high_level(void) ...@@ -2435,6 +2437,9 @@ static __init void of_unittest_overlay_high_level(void)
unittest(overlay_data_apply("overlay_bad_add_dup_node", NULL), unittest(overlay_data_apply("overlay_bad_add_dup_node", NULL),
"Adding overlay 'overlay_bad_add_dup_node' failed\n"); "Adding overlay 'overlay_bad_add_dup_node' failed\n");
unittest(overlay_data_apply("overlay_bad_add_dup_prop", NULL),
"Adding overlay 'overlay_bad_add_dup_prop' failed\n");
unittest(overlay_data_apply("overlay_bad_phandle", NULL), unittest(overlay_data_apply("overlay_bad_phandle", NULL),
"Adding overlay 'overlay_bad_phandle' failed\n"); "Adding overlay 'overlay_bad_phandle' failed\n");
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment