Commit 2fee7b18 authored by Linus Torvalds's avatar Linus Torvalds

Merge master.kernel.org:/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog

* master.kernel.org:/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog:
  [WATCHDOG] iTCO_wdt.c shutdown patch
  [WATCHDOG] iTCO_wdt.c - pci_dev_put fix
  [WATCHDOG] iTCO_wdt (Intel TCO Timer) driver
  [WATCHDOG] iTCO_wdt (Intel TCO Timer) driver
parents 353cefdb 1bef84be
...@@ -316,6 +316,27 @@ config I8XX_TCO ...@@ -316,6 +316,27 @@ config I8XX_TCO
To compile this driver as a module, choose M here: the To compile this driver as a module, choose M here: the
module will be called i8xx_tco. module will be called i8xx_tco.
config ITCO_WDT
tristate "Intel TCO Timer/Watchdog (EXPERIMENTAL)"
depends on WATCHDOG && (X86 || IA64) && PCI && EXPERIMENTAL
---help---
Hardware driver for the intel TCO timer based watchdog devices.
These drivers are included in the Intel 82801 I/O Controller
Hub family 'from ICH0 up to ICH7) and in the Intel 6300ESB
controller hub.
The TCO (Total Cost of Ownership) timer is a watchdog timer
that will reboot the machine after its second expiration. The
expiration time can be configured with the "heartbeat" parameter.
On some motherboards the driver may fail to reset the chipset's
NO_REBOOT flag which prevents the watchdog from rebooting the
machine. If this is the case you will get a kernel message like
"failed to reset NO_REBOOT flag, reboot disabled by hardware".
To compile this driver as a module, choose M here: the
module will be called iTCO_wdt.
config SC1200_WDT config SC1200_WDT
tristate "National Semiconductor PC87307/PC97307 (ala SC1200) Watchdog" tristate "National Semiconductor PC87307/PC97307 (ala SC1200) Watchdog"
depends on WATCHDOG && X86 depends on WATCHDOG && X86
......
...@@ -47,6 +47,7 @@ obj-$(CONFIG_IBMASR) += ibmasr.o ...@@ -47,6 +47,7 @@ obj-$(CONFIG_IBMASR) += ibmasr.o
obj-$(CONFIG_WAFER_WDT) += wafer5823wdt.o obj-$(CONFIG_WAFER_WDT) += wafer5823wdt.o
obj-$(CONFIG_I6300ESB_WDT) += i6300esb.o obj-$(CONFIG_I6300ESB_WDT) += i6300esb.o
obj-$(CONFIG_I8XX_TCO) += i8xx_tco.o obj-$(CONFIG_I8XX_TCO) += i8xx_tco.o
obj-$(CONFIG_ITCO_WDT) += iTCO_wdt.o
obj-$(CONFIG_SC1200_WDT) += sc1200wdt.o obj-$(CONFIG_SC1200_WDT) += sc1200wdt.o
obj-$(CONFIG_SCx200_WDT) += scx200_wdt.o obj-$(CONFIG_SCx200_WDT) += scx200_wdt.o
obj-$(CONFIG_60XX_WDT) += sbc60xxwdt.o obj-$(CONFIG_60XX_WDT) += sbc60xxwdt.o
......
/*
* intel TCO Watchdog Driver (Used in i82801 and i6300ESB chipsets)
*
* (c) Copyright 2006 Wim Van Sebroeck <wim@iguana.be>.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*
* Neither Wim Van Sebroeck nor Iguana vzw. admit liability nor
* provide warranty for any of this software. This material is
* provided "AS-IS" and at no charge.
*
* The TCO watchdog is implemented in the following I/O controller hubs:
* (See the intel documentation on http://developer.intel.com.)
* 82801AA (ICH) : document number 290655-003, 290677-014,
* 82801AB (ICHO) : document number 290655-003, 290677-014,
* 82801BA (ICH2) : document number 290687-002, 298242-027,
* 82801BAM (ICH2-M) : document number 290687-002, 298242-027,
* 82801CA (ICH3-S) : document number 290733-003, 290739-013,
* 82801CAM (ICH3-M) : document number 290716-001, 290718-007,
* 82801DB (ICH4) : document number 290744-001, 290745-020,
* 82801DBM (ICH4-M) : document number 252337-001, 252663-005,
* 82801E (C-ICH) : document number 273599-001, 273645-002,
* 82801EB (ICH5) : document number 252516-001, 252517-003,
* 82801ER (ICH5R) : document number 252516-001, 252517-003,
* 82801FB (ICH6) : document number 301473-002, 301474-007,
* 82801FR (ICH6R) : document number 301473-002, 301474-007,
* 82801FBM (ICH6-M) : document number 301473-002, 301474-007,
* 82801FW (ICH6W) : document number 301473-001, 301474-007,
* 82801FRW (ICH6RW) : document number 301473-001, 301474-007,
* 82801GB (ICH7) : document number 307013-002, 307014-009,
* 82801GR (ICH7R) : document number 307013-002, 307014-009,
* 82801GDH (ICH7DH) : document number 307013-002, 307014-009,
* 82801GBM (ICH7-M) : document number 307013-002, 307014-009,
* 82801GHM (ICH7-M DH) : document number 307013-002, 307014-009,
* 6300ESB (6300ESB) : document number 300641-003
*/
/*
* Includes, defines, variables, module parameters, ...
*/
/* Module and version information */
#define DRV_NAME "iTCO_wdt"
#define DRV_VERSION "1.00"
#define DRV_RELDATE "30-Jul-2006"
#define PFX DRV_NAME ": "
/* Includes */
#include <linux/config.h> /* For CONFIG_WATCHDOG_NOWAYOUT/... */
#include <linux/module.h> /* For module specific items */
#include <linux/moduleparam.h> /* For new moduleparam's */
#include <linux/types.h> /* For standard types (like size_t) */
#include <linux/errno.h> /* For the -ENODEV/... values */
#include <linux/kernel.h> /* For printk/panic/... */
#include <linux/miscdevice.h> /* For MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR) */
#include <linux/watchdog.h> /* For the watchdog specific items */
#include <linux/init.h> /* For __init/__exit/... */
#include <linux/fs.h> /* For file operations */
#include <linux/platform_device.h> /* For platform_driver framework */
#include <linux/pci.h> /* For pci functions */
#include <linux/ioport.h> /* For io-port access */
#include <linux/spinlock.h> /* For spin_lock/spin_unlock/... */
#include <asm/uaccess.h> /* For copy_to_user/put_user/... */
#include <asm/io.h> /* For inb/outb/... */
/* TCO related info */
enum iTCO_chipsets {
TCO_ICH = 0, /* ICH */
TCO_ICH0, /* ICH0 */
TCO_ICH2, /* ICH2 */
TCO_ICH2M, /* ICH2-M */
TCO_ICH3, /* ICH3-S */
TCO_ICH3M, /* ICH3-M */
TCO_ICH4, /* ICH4 */
TCO_ICH4M, /* ICH4-M */
TCO_CICH, /* C-ICH */
TCO_ICH5, /* ICH5 & ICH5R */
TCO_6300ESB, /* 6300ESB */
TCO_ICH6, /* ICH6 & ICH6R */
TCO_ICH6M, /* ICH6-M */
TCO_ICH6W, /* ICH6W & ICH6RW */
TCO_ICH7, /* ICH7 & ICH7R */
TCO_ICH7M, /* ICH7-M */
TCO_ICH7MDH, /* ICH7-M DH */
};
static struct {
char *name;
unsigned int iTCO_version;
} iTCO_chipset_info[] __devinitdata = {
{"ICH", 1},
{"ICH0", 1},
{"ICH2", 1},
{"ICH2-M", 1},
{"ICH3-S", 1},
{"ICH3-M", 1},
{"ICH4", 1},
{"ICH4-M", 1},
{"C-ICH", 1},
{"ICH5 or ICH5R", 1},
{"6300ESB", 1},
{"ICH6 or ICH6R", 2},
{"ICH6-M", 2},
{"ICH6W or ICH6RW", 2},
{"ICH7 or ICH7R", 2},
{"ICH7-M", 2},
{"ICH7-M DH", 2},
{NULL,0}
};
/*
* This data only exists for exporting the supported PCI ids
* via MODULE_DEVICE_TABLE. We do not actually register a
* pci_driver, because the I/O Controller Hub has also other
* functions that probably will be registered by other drivers.
*/
static struct pci_device_id iTCO_wdt_pci_tbl[] = {
{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801AA_0, PCI_ANY_ID, PCI_ANY_ID, 0, 0, TCO_ICH },
{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801AB_0, PCI_ANY_ID, PCI_ANY_ID, 0, 0, TCO_ICH0 },
{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801BA_0, PCI_ANY_ID, PCI_ANY_ID, 0, 0, TCO_ICH2 },
{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801BA_10, PCI_ANY_ID, PCI_ANY_ID, 0, 0, TCO_ICH2M },
{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_0, PCI_ANY_ID, PCI_ANY_ID, 0, 0, TCO_ICH3 },
{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_12, PCI_ANY_ID, PCI_ANY_ID, 0, 0, TCO_ICH3M },
{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801DB_0, PCI_ANY_ID, PCI_ANY_ID, 0, 0, TCO_ICH4 },
{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801DB_12, PCI_ANY_ID, PCI_ANY_ID, 0, 0, TCO_ICH4M },
{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801E_0, PCI_ANY_ID, PCI_ANY_ID, 0, 0, TCO_CICH },
{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801EB_0, PCI_ANY_ID, PCI_ANY_ID, 0, 0, TCO_ICH5 },
{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ESB_1, PCI_ANY_ID, PCI_ANY_ID, 0, 0, TCO_6300ESB },
{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_0, PCI_ANY_ID, PCI_ANY_ID, 0, 0, TCO_ICH6 },
{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_1, PCI_ANY_ID, PCI_ANY_ID, 0, 0, TCO_ICH6M },
{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_2, PCI_ANY_ID, PCI_ANY_ID, 0, 0, TCO_ICH6W },
{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH7_0, PCI_ANY_ID, PCI_ANY_ID, 0, 0, TCO_ICH7 },
{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH7_1, PCI_ANY_ID, PCI_ANY_ID, 0, 0, TCO_ICH7M },
{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH7_31, PCI_ANY_ID, PCI_ANY_ID, 0, 0, TCO_ICH7MDH },
{ 0, }, /* End of list */
};
MODULE_DEVICE_TABLE (pci, iTCO_wdt_pci_tbl);
/* Address definitions for the TCO */
#define TCOBASE iTCO_wdt_private.ACPIBASE + 0x60 /* TCO base address */
#define SMI_EN iTCO_wdt_private.ACPIBASE + 0x30 /* SMI Control and Enable Register */
#define TCO_RLD TCOBASE + 0x00 /* TCO Timer Reload and Current Value */
#define TCOv1_TMR TCOBASE + 0x01 /* TCOv1 Timer Initial Value */
#define TCO_DAT_IN TCOBASE + 0x02 /* TCO Data In Register */
#define TCO_DAT_OUT TCOBASE + 0x03 /* TCO Data Out Register */
#define TCO1_STS TCOBASE + 0x04 /* TCO1 Status Register */
#define TCO2_STS TCOBASE + 0x06 /* TCO2 Status Register */
#define TCO1_CNT TCOBASE + 0x08 /* TCO1 Control Register */
#define TCO2_CNT TCOBASE + 0x0a /* TCO2 Control Register */
#define TCOv2_TMR TCOBASE + 0x12 /* TCOv2 Timer Initial Value */
/* internal variables */
static unsigned long is_active;
static char expect_release;
static struct { /* this is private data for the iTCO_wdt device */
unsigned int iTCO_version; /* TCO version/generation */
unsigned long ACPIBASE; /* The cards ACPIBASE address (TCOBASE = ACPIBASE+0x60) */
unsigned long __iomem *gcs; /* NO_REBOOT flag is Memory-Mapped GCS register bit 5 (TCO version 2) */
spinlock_t io_lock; /* the lock for io operations */
struct pci_dev *pdev; /* the PCI-device */
} iTCO_wdt_private;
static struct platform_device *iTCO_wdt_platform_device; /* the watchdog platform device */
/* module parameters */
#define WATCHDOG_HEARTBEAT 30 /* 30 sec default heartbeat */
static int heartbeat = WATCHDOG_HEARTBEAT; /* in seconds */
module_param(heartbeat, int, 0);
MODULE_PARM_DESC(heartbeat, "Watchdog heartbeat in seconds. (2<heartbeat<39 (TCO v1) or 613 (TCO v2), default=" __MODULE_STRING(WATCHDOG_HEARTBEAT) ")");
static int nowayout = WATCHDOG_NOWAYOUT;
module_param(nowayout, int, 0);
MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=CONFIG_WATCHDOG_NOWAYOUT)");
/*
* Some TCO specific functions
*/
static inline unsigned int seconds_to_ticks(int seconds)
{
/* the internal timer is stored as ticks which decrement
* every 0.6 seconds */
return (seconds * 10) / 6;
}
static void iTCO_wdt_set_NO_REBOOT_bit(void)
{
u32 val32;
/* Set the NO_REBOOT bit: this disables reboots */
if (iTCO_wdt_private.iTCO_version == 2) {
val32 = readl(iTCO_wdt_private.gcs);
val32 |= 0x00000020;
writel(val32, iTCO_wdt_private.gcs);
} else if (iTCO_wdt_private.iTCO_version == 1) {
pci_read_config_dword(iTCO_wdt_private.pdev, 0xd4, &val32);
val32 |= 0x00000002;
pci_write_config_dword(iTCO_wdt_private.pdev, 0xd4, val32);
}
}
static int iTCO_wdt_unset_NO_REBOOT_bit(void)
{
int ret = 0;
u32 val32;
/* Unset the NO_REBOOT bit: this enables reboots */
if (iTCO_wdt_private.iTCO_version == 2) {
val32 = readl(iTCO_wdt_private.gcs);
val32 &= 0xffffffdf;
writel(val32, iTCO_wdt_private.gcs);
val32 = readl(iTCO_wdt_private.gcs);
if (val32 & 0x00000020)
ret = -EIO;
} else if (iTCO_wdt_private.iTCO_version == 1) {
pci_read_config_dword(iTCO_wdt_private.pdev, 0xd4, &val32);
val32 &= 0xfffffffd;
pci_write_config_dword(iTCO_wdt_private.pdev, 0xd4, val32);
pci_read_config_dword(iTCO_wdt_private.pdev, 0xd4, &val32);
if (val32 & 0x00000002)
ret = -EIO;
}
return ret; /* returns: 0 = OK, -EIO = Error */
}
static int iTCO_wdt_start(void)
{
unsigned int val;
spin_lock(&iTCO_wdt_private.io_lock);
/* disable chipset's NO_REBOOT bit */
if (iTCO_wdt_unset_NO_REBOOT_bit()) {
printk(KERN_ERR PFX "failed to reset NO_REBOOT flag, reboot disabled by hardware\n");
return -EIO;
}
/* Bit 11: TCO Timer Halt -> 0 = The TCO timer is enabled to count */
val = inw(TCO1_CNT);
val &= 0xf7ff;
outw(val, TCO1_CNT);
val = inw(TCO1_CNT);
spin_unlock(&iTCO_wdt_private.io_lock);
if (val & 0x0800)
return -1;
return 0;
}
static int iTCO_wdt_stop(void)
{
unsigned int val;
spin_lock(&iTCO_wdt_private.io_lock);
/* Bit 11: TCO Timer Halt -> 1 = The TCO timer is disabled */
val = inw(TCO1_CNT);
val |= 0x0800;
outw(val, TCO1_CNT);
val = inw(TCO1_CNT);
/* Set the NO_REBOOT bit to prevent later reboots, just for sure */
iTCO_wdt_set_NO_REBOOT_bit();
spin_unlock(&iTCO_wdt_private.io_lock);
if ((val & 0x0800) == 0)
return -1;
return 0;
}
static int iTCO_wdt_keepalive(void)
{
spin_lock(&iTCO_wdt_private.io_lock);
/* Reload the timer by writing to the TCO Timer Counter register */
if (iTCO_wdt_private.iTCO_version == 2) {
outw(0x01, TCO_RLD);
} else if (iTCO_wdt_private.iTCO_version == 1) {
outb(0x01, TCO_RLD);
}
spin_unlock(&iTCO_wdt_private.io_lock);
return 0;
}
static int iTCO_wdt_set_heartbeat(int t)
{
unsigned int val16;
unsigned char val8;
unsigned int tmrval;
tmrval = seconds_to_ticks(t);
/* from the specs: */
/* "Values of 0h-3h are ignored and should not be attempted" */
if (tmrval < 0x04)
return -EINVAL;
if (((iTCO_wdt_private.iTCO_version == 2) && (tmrval > 0x3ff)) ||
((iTCO_wdt_private.iTCO_version == 1) && (tmrval > 0x03f)))
return -EINVAL;
/* Write new heartbeat to watchdog */
if (iTCO_wdt_private.iTCO_version == 2) {
spin_lock(&iTCO_wdt_private.io_lock);
val16 = inw(TCOv2_TMR);
val16 &= 0xfc00;
val16 |= tmrval;
outw(val16, TCOv2_TMR);
val16 = inw(TCOv2_TMR);
spin_unlock(&iTCO_wdt_private.io_lock);
if ((val16 & 0x3ff) != tmrval)
return -EINVAL;
} else if (iTCO_wdt_private.iTCO_version == 1) {
spin_lock(&iTCO_wdt_private.io_lock);
val8 = inb(TCOv1_TMR);
val8 &= 0xc0;
val8 |= (tmrval & 0xff);
outb(val8, TCOv1_TMR);
val8 = inb(TCOv1_TMR);
spin_unlock(&iTCO_wdt_private.io_lock);
if ((val8 & 0x3f) != tmrval)
return -EINVAL;
}
heartbeat = t;
return 0;
}
static int iTCO_wdt_get_timeleft (int *time_left)
{
unsigned int val16;
unsigned char val8;
/* read the TCO Timer */
if (iTCO_wdt_private.iTCO_version == 2) {
spin_lock(&iTCO_wdt_private.io_lock);
val16 = inw(TCO_RLD);
val16 &= 0x3ff;
spin_unlock(&iTCO_wdt_private.io_lock);
*time_left = (val16 * 6) / 10;
} else if (iTCO_wdt_private.iTCO_version == 1) {
spin_lock(&iTCO_wdt_private.io_lock);
val8 = inb(TCO_RLD);
val8 &= 0x3f;
spin_unlock(&iTCO_wdt_private.io_lock);
*time_left = (val8 * 6) / 10;
}
return 0;
}
/*
* /dev/watchdog handling
*/
static int iTCO_wdt_open (struct inode *inode, struct file *file)
{
/* /dev/watchdog can only be opened once */
if (test_and_set_bit(0, &is_active))
return -EBUSY;
/*
* Reload and activate timer
*/
iTCO_wdt_keepalive();
iTCO_wdt_start();
return nonseekable_open(inode, file);
}
static int iTCO_wdt_release (struct inode *inode, struct file *file)
{
/*
* Shut off the timer.
*/
if (expect_release == 42) {
iTCO_wdt_stop();
} else {
printk(KERN_CRIT PFX "Unexpected close, not stopping watchdog!\n");
iTCO_wdt_keepalive();
}
clear_bit(0, &is_active);
expect_release = 0;
return 0;
}
static ssize_t iTCO_wdt_write (struct file *file, const char __user *data,
size_t len, loff_t * ppos)
{
/* See if we got the magic character 'V' and reload the timer */
if (len) {
if (!nowayout) {
size_t i;
/* note: just in case someone wrote the magic character
* five months ago... */
expect_release = 0;
/* scan to see whether or not we got the magic character */
for (i = 0; i != len; i++) {
char c;
if (get_user(c, data+i))
return -EFAULT;
if (c == 'V')
expect_release = 42;
}
}
/* someone wrote to us, we should reload the timer */
iTCO_wdt_keepalive();
}
return len;
}
static int iTCO_wdt_ioctl (struct inode *inode, struct file *file,
unsigned int cmd, unsigned long arg)
{
int new_options, retval = -EINVAL;
int new_heartbeat;
int time_left;
void __user *argp = (void __user *)arg;
int __user *p = argp;
static struct watchdog_info ident = {
.options = WDIOF_SETTIMEOUT |
WDIOF_KEEPALIVEPING |
WDIOF_MAGICCLOSE,
.firmware_version = 0,
.identity = DRV_NAME,
};
switch (cmd) {
case WDIOC_GETSUPPORT:
return copy_to_user(argp, &ident,
sizeof (ident)) ? -EFAULT : 0;
case WDIOC_GETSTATUS:
case WDIOC_GETBOOTSTATUS:
return put_user(0, p);
case WDIOC_KEEPALIVE:
iTCO_wdt_keepalive();
return 0;
case WDIOC_SETOPTIONS:
{
if (get_user(new_options, p))
return -EFAULT;
if (new_options & WDIOS_DISABLECARD) {
iTCO_wdt_stop();
retval = 0;
}
if (new_options & WDIOS_ENABLECARD) {
iTCO_wdt_keepalive();
iTCO_wdt_start();
retval = 0;
}
return retval;
}
case WDIOC_SETTIMEOUT:
{
if (get_user(new_heartbeat, p))
return -EFAULT;
if (iTCO_wdt_set_heartbeat(new_heartbeat))
return -EINVAL;
iTCO_wdt_keepalive();
/* Fall */
}
case WDIOC_GETTIMEOUT:
return put_user(heartbeat, p);
case WDIOC_GETTIMELEFT:
{
if (iTCO_wdt_get_timeleft(&time_left))
return -EINVAL;
return put_user(time_left, p);
}
default:
return -ENOIOCTLCMD;
}
}
/*
* Kernel Interfaces
*/
static struct file_operations iTCO_wdt_fops = {
.owner = THIS_MODULE,
.llseek = no_llseek,
.write = iTCO_wdt_write,
.ioctl = iTCO_wdt_ioctl,
.open = iTCO_wdt_open,
.release = iTCO_wdt_release,
};
static struct miscdevice iTCO_wdt_miscdev = {
.minor = WATCHDOG_MINOR,
.name = "watchdog",
.fops = &iTCO_wdt_fops,
};
/*
* Init & exit routines
*/
static int iTCO_wdt_init(struct pci_dev *pdev, const struct pci_device_id *ent, struct platform_device *dev)
{
int ret;
u32 base_address;
unsigned long RCBA;
unsigned long val32;
/*
* Find the ACPI/PM base I/O address which is the base
* for the TCO registers (TCOBASE=ACPIBASE + 0x60)
* ACPIBASE is bits [15:7] from 0x40-0x43
*/
pci_read_config_dword(pdev, 0x40, &base_address);
base_address &= 0x00007f80;
if (base_address == 0x00000000) {
/* Something's wrong here, ACPIBASE has to be set */
printk(KERN_ERR PFX "failed to get TCOBASE address\n");
pci_dev_put(pdev);
return -ENODEV;
}
iTCO_wdt_private.iTCO_version = iTCO_chipset_info[ent->driver_data].iTCO_version;
iTCO_wdt_private.ACPIBASE = base_address;
iTCO_wdt_private.pdev = pdev;
/* Get the Memory-Mapped GCS register, we need it for the NO_REBOOT flag (TCO v2) */
/* To get access to it you have to read RCBA from PCI Config space 0xf0
and use it as base. GCS = RCBA + ICH6_GCS(0x3410). */
if (iTCO_wdt_private.iTCO_version == 2) {
pci_read_config_dword(pdev, 0xf0, &base_address);
RCBA = base_address & 0xffffc000;
iTCO_wdt_private.gcs = ioremap((RCBA + 0x3410),4);
}
/* Check chipset's NO_REBOOT bit */
if (iTCO_wdt_unset_NO_REBOOT_bit()) {
printk(KERN_ERR PFX "failed to reset NO_REBOOT flag, reboot disabled by hardware\n");
ret = -ENODEV; /* Cannot reset NO_REBOOT bit */
goto out;
}
/* Set the NO_REBOOT bit to prevent later reboots, just for sure */
iTCO_wdt_set_NO_REBOOT_bit();
/* Set the TCO_EN bit in SMI_EN register */
if (!request_region(SMI_EN, 4, "iTCO_wdt")) {
printk(KERN_ERR PFX "I/O address 0x%04lx already in use\n",
SMI_EN );
ret = -EIO;
goto out;
}
val32 = inl(SMI_EN);
val32 &= 0xffffdfff; /* Turn off SMI clearing watchdog */
outl(val32, SMI_EN);
release_region(SMI_EN, 4);
/* The TCO I/O registers reside in a 32-byte range pointed to by the TCOBASE value */
if (!request_region (TCOBASE, 0x20, "iTCO_wdt")) {
printk (KERN_ERR PFX "I/O address 0x%04lx already in use\n",
TCOBASE);
ret = -EIO;
goto out;
}
printk(KERN_INFO PFX "Found a %s TCO device (Version=%d, TCOBASE=0x%04lx)\n",
iTCO_chipset_info[ent->driver_data].name,
iTCO_chipset_info[ent->driver_data].iTCO_version,
TCOBASE);
/* Clear out the (probably old) status */
outb(0, TCO1_STS);
outb(3, TCO2_STS);
/* Make sure the watchdog is not running */
iTCO_wdt_stop();
/* Check that the heartbeat value is within it's range ; if not reset to the default */
if (iTCO_wdt_set_heartbeat(heartbeat)) {
iTCO_wdt_set_heartbeat(WATCHDOG_HEARTBEAT);
printk(KERN_INFO PFX "heartbeat value must be 2<heartbeat<39 (TCO v1) or 613 (TCO v2), using %d\n",
heartbeat);
}
ret = misc_register(&iTCO_wdt_miscdev);
if (ret != 0) {
printk(KERN_ERR PFX "cannot register miscdev on minor=%d (err=%d)\n",
WATCHDOG_MINOR, ret);
goto unreg_region;
}
printk (KERN_INFO PFX "initialized. heartbeat=%d sec (nowayout=%d)\n",
heartbeat, nowayout);
return 0;
unreg_region:
release_region (TCOBASE, 0x20);
out:
if (iTCO_wdt_private.iTCO_version == 2)
iounmap(iTCO_wdt_private.gcs);
pci_dev_put(iTCO_wdt_private.pdev);
iTCO_wdt_private.ACPIBASE = 0;
return ret;
}
static void iTCO_wdt_cleanup(void)
{
/* Stop the timer before we leave */
if (!nowayout)
iTCO_wdt_stop();
/* Deregister */
misc_deregister(&iTCO_wdt_miscdev);
release_region(TCOBASE, 0x20);
if (iTCO_wdt_private.iTCO_version == 2)
iounmap(iTCO_wdt_private.gcs);
pci_dev_put(iTCO_wdt_private.pdev);
iTCO_wdt_private.ACPIBASE = 0;
}
static int iTCO_wdt_probe(struct platform_device *dev)
{
int found = 0;
struct pci_dev *pdev = NULL;
const struct pci_device_id *ent;
spin_lock_init(&iTCO_wdt_private.io_lock);
for_each_pci_dev(pdev) {
ent = pci_match_id(iTCO_wdt_pci_tbl, pdev);
if (ent) {
if (!(iTCO_wdt_init(pdev, ent, dev))) {
found++;
break;
}
}
}
if (!found) {
printk(KERN_INFO PFX "No card detected\n");
return -ENODEV;
}
return 0;
}
static int iTCO_wdt_remove(struct platform_device *dev)
{
if (iTCO_wdt_private.ACPIBASE)
iTCO_wdt_cleanup();
return 0;
}
static void iTCO_wdt_shutdown(struct platform_device *dev)
{
iTCO_wdt_stop();
}
#define iTCO_wdt_suspend NULL
#define iTCO_wdt_resume NULL
static struct platform_driver iTCO_wdt_driver = {
.probe = iTCO_wdt_probe,
.remove = iTCO_wdt_remove,
.shutdown = iTCO_wdt_shutdown,
.suspend = iTCO_wdt_suspend,
.resume = iTCO_wdt_resume,
.driver = {
.owner = THIS_MODULE,
.name = DRV_NAME,
},
};
static int __init iTCO_wdt_init_module(void)
{
int err;
printk(KERN_INFO PFX "Intel TCO WatchDog Timer Driver v%s (%s)\n",
DRV_VERSION, DRV_RELDATE);
err = platform_driver_register(&iTCO_wdt_driver);
if (err)
return err;
iTCO_wdt_platform_device = platform_device_register_simple(DRV_NAME, -1, NULL, 0);
if (IS_ERR(iTCO_wdt_platform_device)) {
err = PTR_ERR(iTCO_wdt_platform_device);
goto unreg_platform_driver;
}
return 0;
unreg_platform_driver:
platform_driver_unregister(&iTCO_wdt_driver);
return err;
}
static void __exit iTCO_wdt_cleanup_module(void)
{
platform_device_unregister(iTCO_wdt_platform_device);
platform_driver_unregister(&iTCO_wdt_driver);
printk(KERN_INFO PFX "Watchdog Module Unloaded.\n");
}
module_init(iTCO_wdt_init_module);
module_exit(iTCO_wdt_cleanup_module);
MODULE_AUTHOR("Wim Van Sebroeck <wim@iguana.be>");
MODULE_DESCRIPTION("Intel TCO WatchDog Timer Driver");
MODULE_VERSION(DRV_VERSION);
MODULE_LICENSE("GPL");
MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment