dt-bindings: more status property removal from examples

Whack-a-mole some more occurrences of status in examples.
Acked-by: Vinod Koul <vinod.koul@intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: James Hogan <jhogan@kernel.org>
Cc: Ulf Hansson <ulf.hansson@linaro.org>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Brian Norris <computersforpeace@gmail.com>
Cc: Boris Brezillon <boris.brezillon@bootlin.com>
Cc: Marek Vasut <marek.vasut@gmail.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Cc: Tanmay Inamdar <tinamdar@apm.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Rodolfo Giometti <giometti@enneenne.com>
Signed-off-by: Rob Herring <robh@kernel.org>

Documentation/devicetree/bindings/dma/k3dma.txt

@@ -23,7 +23,6 @@ Controller:
 			dma-requests = <27>;
 			interrupts = <0 12 4>;
 			clocks = <&pclk>;
-			status = "disable";
 		};
 
 Client:

Documentation/devicetree/bindings/dma/ti-edma.txt

@@ -190,7 +190,6 @@ mmc0: mmc@23000000 {
 	power-domains = <&k2g_pds 0xb>;
 	clocks = <&k2g_clks 0xb 1>, <&k2g_clks 0xb 2>;
 	clock-names = "fck", "mmchsdb_fck";
-	status = "disabled";
 };
 
 ------------------------------------------------------------------------------

Documentation/devicetree/bindings/mips/lantiq/rcu.txt

@@ -61,7 +61,6 @@ Example of the RCU bindings on a xRX200 SoC:
 		usb_phy0: usb2-phy@18 {
 			compatible = "lantiq,xrx200-usb2-phy";
 			reg = <0x18 4>, <0x38 4>;
-			status = "disabled";
 
 			resets = <&reset1 4 4>, <&reset0 4 4>;
 			reset-names = "phy", "ctrl";
@@ -71,7 +70,6 @@ Example of the RCU bindings on a xRX200 SoC:
 		usb_phy1: usb2-phy@34 {
 			compatible = "lantiq,xrx200-usb2-phy";
 			reg = <0x34 4>, <0x3C 4>;
-			status = "disabled";
 
 			resets = <&reset1 5 4>, <&reset0 4 4>;
 			reset-names = "phy", "ctrl";

Documentation/devicetree/bindings/mmc/tmio_mmc.txt

@@ -67,7 +67,6 @@ Example: R8A7790 (R-Car H2) SDHI controller nodes
 		max-frequency = <195000000>;
 		power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
 		resets = <&cpg 314>;
-		status = "disabled";
 	};
 
 	sdhi1: sd@ee120000 {
@@ -81,7 +80,6 @@ Example: R8A7790 (R-Car H2) SDHI controller nodes
 		max-frequency = <195000000>;
 		power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
 		resets = <&cpg 313>;
-		status = "disabled";
 	};
 
 	sdhi2: sd@ee140000 {
@@ -95,7 +93,6 @@ Example: R8A7790 (R-Car H2) SDHI controller nodes
 		max-frequency = <97500000>;
 		power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
 		resets = <&cpg 312>;
-		status = "disabled";
 	};
 
 	sdhi3: sd@ee160000 {
@@ -109,5 +106,4 @@ Example: R8A7790 (R-Car H2) SDHI controller nodes
 		max-frequency = <97500000>;
 		power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
 		resets = <&cpg 311>;
-		status = "disabled";
 	};

Documentation/devicetree/bindings/mtd/mtk-nand.txt

@@ -20,7 +20,6 @@ Required NFI properties:
 - interrupts:			Interrupts of NFI.
 - clocks:			NFI required clocks.
 - clock-names:			NFI clocks internal name.
-- status:			Disabled default. Then set "okay" by platform.
 - ecc-engine:			Required ECC Engine node.
 - #address-cells:		NAND chip index, should be 1.
 - #size-cells:			Should be 0.
@@ -34,7 +33,6 @@ Example:
 		clocks = <&pericfg CLK_PERI_NFI>,
 			 <&pericfg CLK_PERI_NFI_PAD>;
 		clock-names = "nfi_clk", "pad_clk";
-		status = "disabled";
 		ecc-engine = <&bch>;
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -152,7 +150,6 @@ Required BCH properties:
 - interrupts:	Interrupts of ECC.
 - clocks:	ECC required clocks.
 - clock-names:	ECC clocks internal name.
-- status:	Disabled default. Then set "okay" by platform.
 
 Example:
 
@@ -162,5 +159,4 @@ Example:
 		interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_LOW>;
 		clocks = <&pericfg CLK_PERI_NFI_ECC>;
 		clock-names = "nfiecc_clk";
-		status = "disabled";
 	};

Documentation/devicetree/bindings/pci/xgene-pci.txt

@@ -25,8 +25,6 @@ Optional properties:
 
 Example:
 
-SoC-specific DT Entry:
-
 	pcie0: pcie@1f2b0000 {
 		status = "disabled";
 		device_type = "pci";
@@ -50,8 +48,3 @@ SoC-specific DT Entry:
 		clocks = <&pcie0clk 0>;
 	};
 
-
-Board-specific DT Entry:
-	&pcie0 {
-		status = "ok";
-	};

Documentation/devicetree/bindings/pps/pps-gpio.txt

@@ -20,5 +20,4 @@ Example:
 		assert-falling-edge;
 
 		compatible = "pps-gpio";
-		status = "okay";
 	};