SPEAr: Add DT bindings for SPEAr's timer

All SPEAr SoC's use ST's Timer module. This patch adds device tree probing
capability for that.
Signed-off-by: Viresh Kumar <viresh.kumar@st.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Documentation/devicetree/bindings/arm/spear-timer.txt

+* SPEAr ARM Timer
+
+** Timer node required properties:
+
+- compatible : Should be:
+	"st,spear-timer"
+- reg: Address range of the timer registers
+- interrupt-parent: Should be the phandle for the interrupt controller
+  that services interrupts for this device
+- interrupt: Should contain the timer interrupt number
+
+Example:
+
+	timer@f0000000 {
+		compatible = "st,spear-timer";
+		reg = <0xf0000000 0x400>;
+		interrupts = <2>;
+	};

arch/arm/boot/dts/spear3xx.dtsi

@@ -139,6 +139,12 @@ wdt@fc880000 {
 				interrupts = <12>;
 				status = "disabled";
 			};
+
+			timer@f0000000 {
+				compatible = "st,spear-timer";
+				reg = <0xf0000000 0x400>;
+				interrupts = <2>;
+			};
 		};
 	};
 };

arch/arm/boot/dts/spear600.dtsi

@@ -177,6 +177,12 @@ i2c@d0200000 {
 				interrupts = <28>;
 				status = "disabled";
 			};
+
+			timer@f0000000 {
+				compatible = "st,spear-timer";
+				reg = <0xf0000000 0x400>;
+				interrupts = <16>;
+			};
 		};
 	};
 };

arch/arm/mach-spear3xx/include/mach/generic.h

@@ -28,7 +28,7 @@ extern struct pl022_ssp_controller pl022_plat_data;
 extern struct pl08x_platform_data pl080_plat_data;
 
 /* Add spear3xx family function declarations here */
-void __init spear_setup_timer(resource_size_t base, int irq);
+void __init spear_setup_of_timer(void);
 void __init spear3xx_map_io(void);
 void __init spear3xx_dt_init_irq(void);
 

arch/arm/mach-spear3xx/include/mach/irqs.h

@@ -16,7 +16,6 @@
 
 /* FIXME: probe all these from DT */
 #define SPEAR3XX_IRQ_INTRCOMM_RAS_ARM		1
-#define SPEAR3XX_IRQ_CPU_GPT1_1			2
 #define SPEAR3XX_IRQ_GEN_RAS_1			28
 #define SPEAR3XX_IRQ_GEN_RAS_2			29
 #define SPEAR3XX_IRQ_GEN_RAS_3			30

arch/arm/mach-spear3xx/include/mach/spear.h

@@ -26,7 +26,6 @@
 /* ML1 - Multi Layer CPU Subsystem */
 #define SPEAR3XX_ICM3_ML1_2_BASE	UL(0xF0000000)
 #define VA_SPEAR6XX_ML_CPU_BASE		UL(0xF0000000)
-#define SPEAR3XX_CPU_TMR_BASE		UL(0xF0000000)
 
 /* ICM3 - Basic Subsystem */
 #define SPEAR3XX_ICM3_SMI_CTRL_BASE	UL(0xFC000000)

arch/arm/mach-spear3xx/spear3xx.c

@@ -534,7 +534,7 @@ static void __init spear3xx_timer_init(void)
 	clk_put(gpt_clk);
 	clk_put(pclk);
 
-	spear_setup_timer(SPEAR3XX_CPU_TMR_BASE, SPEAR3XX_IRQ_CPU_GPT1_1);
+	spear_setup_of_timer();
 }
 
 struct sys_timer spear3xx_timer = {

arch/arm/mach-spear6xx/include/mach/generic.h

@@ -16,7 +16,7 @@
 
 #include <linux/init.h>
 
-void __init spear_setup_timer(resource_size_t base, int irq);
+void __init spear_setup_of_timer(void);
 void spear_restart(char, const char *);
 void __init spear6xx_clk_init(void);
 

arch/arm/mach-spear6xx/include/mach/irqs.h

@@ -16,9 +16,6 @@
 
 /* IRQ definitions */
 /* VIC 1 */
-/* FIXME: probe this from DT */
-#define IRQ_CPU_GPT1_1				16
-
 #define IRQ_VIC_END				64
 
 /* GPIO pins virtual irqs */

arch/arm/mach-spear6xx/include/mach/spear.h

@@ -25,7 +25,6 @@
 /* ML-1, 2 - Multi Layer CPU Subsystem */
 #define SPEAR6XX_ML_CPU_BASE		UL(0xF0000000)
 #define VA_SPEAR6XX_ML_CPU_BASE		UL(0xF0000000)
-#define SPEAR6XX_CPU_TMR_BASE		UL(0xF0000000)
 
 /* ICM3 - Basic Subsystem */
 #define SPEAR6XX_ICM3_SMI_CTRL_BASE	UL(0xFC000000)

arch/arm/mach-spear6xx/spear6xx.c

@@ -448,7 +448,7 @@ static void __init spear6xx_timer_init(void)
 	clk_put(gpt_clk);
 	clk_put(pclk);
 
-	spear_setup_timer(SPEAR6XX_CPU_TMR_BASE, IRQ_CPU_GPT1_1);
+	spear_setup_of_timer();
 }
 
 struct sys_timer spear6xx_timer = {

arch/arm/plat-spear/time.c

@@ -18,6 +18,8 @@
 #include <linux/ioport.h>
 #include <linux/io.h>
 #include <linux/kernel.h>
+#include <linux/of_irq.h>
+#include <linux/of_address.h>
 #include <linux/time.h>
 #include <linux/irq.h>
 #include <asm/mach/time.h>
@@ -197,19 +199,32 @@ static void __init spear_clockevent_init(int irq)
 	setup_irq(irq, &spear_timer_irq);
 }
 
-void __init spear_setup_timer(resource_size_t base, int irq)
+const static struct of_device_id timer_of_match[] __initconst = {
+	{ .compatible = "st,spear-timer", },
+	{ },
+};
+
+void __init spear_setup_of_timer(void)
 {
-	int ret;
+	struct device_node *np;
+	int irq, ret;
+
+	np = of_find_matching_node(NULL, timer_of_match);
+	if (!np) {
+		pr_err("%s: No timer passed via DT\n", __func__);
+		return;
+	}
 
-	if (!request_mem_region(base, SZ_1K, "gpt0")) {
-		pr_err("%s:cannot get IO addr\n", __func__);
+	irq = irq_of_parse_and_map(np, 0);
+	if (!irq) {
+		pr_err("%s: No irq passed for timer via DT\n", __func__);
 		return;
 	}
 
-	gpt_base = ioremap(base, SZ_1K);
+	gpt_base = of_iomap(np, 0);
 	if (!gpt_base) {
-		pr_err("%s:ioremap failed for gpt\n", __func__);
-		goto err_mem;
+		pr_err("%s: of iomap failed\n", __func__);
+		return;
 	}
 
 	gpt_clk = clk_get_sys("gpt0", NULL);
@@ -233,6 +248,4 @@ void __init spear_setup_timer(resource_size_t base, int irq)
 	clk_put(gpt_clk);
 err_iomap:
 	iounmap(gpt_base);
-err_mem:
-	release_mem_region(base, SZ_1K);
 }