[DOC]: Add asm/atomic.h asm/bitops.h implementation specification.

Signed-off-by: David S. Miller <davem@davemloft.net>

Documentation/atomic_ops.txt

+		Semantics and Behavior of Atomic and
+		         Bitmask Operations
+
+			  David S. Miller	 
+
+	This document is intended to serve as a guide to Linux port
+maintainers on how to implement atomic counter and bitops interfaces
+properly.
+
+	The atomic_t type should be defined as a signed integer.
+Also, it should be made opaque such that any kind of cast to a normal
+C integer type will fail.  Something like the following should
+suffice:
+
+	typedef struct { volatile int counter; } atomic_t;
+
+	The first operations to implement for atomic_t's are the
+initializers and plain reads.
+
+	#define ATOMIC_INIT(i)		{ (i) }
+	#define atomic_set(v, i)	((v)->counter = (i))
+
+The first macro is used in definitions, such as:
+
+static atomic_t my_counter = ATOMIC_INIT(1);
+
+The second interface can be used at runtime, as in:
+
+	struct foo { atomic_t counter; };
+	...
+
+	struct foo *k;
+
+	k = kmalloc(sizeof(*k), GFP_KERNEL);
+	if (!k)
+		return -ENOMEM;
+	atomic_set(&k->counter, 0);
+
+Next, we have:
+
+	#define atomic_read(v)	((v)->counter)
+
+which simply reads the current value of the counter.
+
+Now, we move onto the actual atomic operation interfaces.
+
+	void atomic_add(int i, atomic_t *v);
+	void atomic_sub(int i, atomic_t *v);
+	void atomic_inc(atomic_t *v);
+	void atomic_dec(atomic_t *v);
+
+These four routines add and subtract integral values to/from the given
+atomic_t value.  The first two routines pass explicit integers by
+which to make the adjustment, whereas the latter two use an implicit
+adjustment value of "1".
+
+One very important aspect of these two routines is that they DO NOT
+require any explicit memory barriers.  They need only perform the
+atomic_t counter update in an SMP safe manner.
+
+Next, we have:
+
+	int atomic_inc_return(atomic_t *v);
+	int atomic_dec_return(atomic_t *v);
+
+These routines add 1 and subtract 1, respectively, from the given
+atomic_t and return the new counter value after the operation is
+performed.
+
+Unlike the above routines, it is required that explicit memory
+barriers are performed before and after the operation.  It must be
+done such that all memory operations before and after the atomic
+operation calls are strongly ordered with respect to the atomic
+operation itself.
+
+For example, it should behave as if a smp_mb() call existed both
+before and after the atomic operation.
+
+If the atomic instructions used in an implementation provide explicit
+memory barrier semantics which satisfy the above requirements, that is
+fine as well.
+
+Let's move on:
+
+	int atomic_add_return(int i, atomic_t *v);
+	int atomic_sub_return(int i, atomic_t *v);
+
+These behave just like atomic_{inc,dec}_return() except that an
+explicit counter adjustment is given instead of the implicit "1".
+This means that like atomic_{inc,dec}_return(), the memory barrier
+semantics are required.
+
+Next:
+
+	int atomic_inc_and_test(atomic_t *v);
+	int atomic_dec_and_test(atomic_t *v);
+
+These two routines increment and decrement by 1, respectively, the
+given atomic counter.  They return a boolean indicating whether the
+resulting counter value was zero or not.
+
+It requires explicit memory barrier semantics around the operation as
+above.
+
+	int atomic_sub_and_test(int i, atomic_t *v);
+
+This is identical to atomic_dec_and_test() except that an explicit
+decrement is given instead of the implicit "1".  It requires explicit
+memory barrier semantics around the operation.
+
+	int atomic_add_negative(int i, atomic_t *v);
+
+The given increment is added to the given atomic counter value.  A
+boolean is return which indicates whether the resulting counter value
+is negative.  It requires explicit memory barrier semantics around the
+operation.
+
+If a caller requires memory barrier semantics around an atomic_t
+operation which does not return a value, a set of interfaces are
+defined which accomplish this:
+
+	void smb_mb__before_atomic_dec(void);
+	void smb_mb__after_atomic_dec(void);
+	void smb_mb__before_atomic_inc(void);
+	void smb_mb__after_atomic_dec(void);
+
+For example, smb_mb__before_atomic_dec() can be used like so:
+
+	obj->dead = 1;
+	smb_mb__before_atomic_dec();
+	atomic_dec(&obj->ref_count);
+
+It makes sure that all memory operations preceeding the atomic_dec()
+call are strongly ordered with respect to the atomic counter
+operation.  In the above example, it guarentees that the assignment of
+"1" to obj->dead will be globally visible to other cpus before the
+atomic counter decrement.
+
+Without the explicitl smb_mb__before_atomic_dec() call, the
+implementation could legally allow the atomic counter update visible
+to other cpus before the "obj->dead = 1;" assignment.
+
+The other three interfaces listed are used to provide explicit
+ordering with respect to memory operations after an atomic_dec() call
+(smb_mb__after_atomic_dec()) and around atomic_inc() calls
+(smb_mb__{before,after}_atomic_inc()).
+
+A missing memory barrier in the cases where they are required by the
+atomic_t implementation above can have disasterous results.  Here is
+an example, which follows a pattern occuring frequently in the Linux
+kernel.  It is the use of atomic counters to implement reference
+counting, and it works such that once the counter falls to zero it can
+be guarenteed that no other entity can be accessing the object:
+
+static void obj_list_add(struct obj *obj)
+{
+	obj->active = 1;
+	list_add(&obj->list);
+}
+
+static void obj_list_del(struct obj *obj)
+{
+	list_del(&obj->list);
+	obj->active = 0;
+}
+
+static void obj_destroy(struct obj *obj)
+{
+	BUG_ON(obj->active);
+	kfree(obj);
+}
+
+struct obj *obj_list_peek(struct list_head *head)
+{
+	if (!list_empty(head)) {
+		struct obj *obj;
+
+		obj = list_entry(head->next, struct obj, list);
+		atomic_inc(&obj->refcnt);
+		return obj;
+	}
+	return NULL;
+}
+
+void obj_poke(void)
+{
+	struct obj *obj;
+
+	spin_lock(&global_list_lock);
+	obj = obj_list_peek(&global_list);
+	spin_unlock(&global_list_lock);
+
+	if (obj) {
+		obj->ops->poke(obj);
+		if (atomic_dec_and_test(&obj->refcnt))
+			obj_destroy(obj);
+	}
+}
+
+void obj_timeout(struct obj *obj)
+{
+	spin_lock(&global_list_lock);
+	obj_list_del(obj);
+	spin_unlock(&global_list_lock);
+
+	if (atomic_dec_and_test(&obj->refcnt))
+		obj_destroy(obj);
+}
+
+(This is a simplification of the ARP queue management in the
+ generic neighbour discover code of the networking.  Olaf Kirch
+ found a bug wrt. memory barriers in kfree_skb() that exposed
+ the atomic_t memory barrier requirements quite clearly.)
+
+Given the above scheme, it must be the case that the obj->active
+update done by the obj list deletion be visible to other processors
+before the atomic counter decrement is performed.
+
+Otherwise, the counter could fall to zero, yet obj->active would still
+be set, thus triggering the assertion in obj_destroy().  The error
+sequence looks like this:
+
+	cpu 0				cpu 1
+	obj_poke()			obj_timeout()
+	obj = obj_list_peek();
+	... gains ref to obj, refcnt=2
+					obj_list_del(obj);
+					obj->active = 0 ...
+					... visibility delayed ...
+					atomic_dec_and_test()
+					... refcnt drops to 1 ...
+	atomic_dec_and_test()
+	... refcount drops to 0 ...
+	obj_destroy()
+	BUG() triggers since obj->active
+	still seen as one
+					obj->active update visibility occurs
+
+With the memory barrier semantics required of the atomic_t operations
+which return values, the above sequence of memory visibility can never
+happen.  Specifically, in the above case the atomic_dec_and_test()
+counter decrement would not become globally visible until the
+obj->active update does.
+
+We will now cover the atomic bitmask operations.  You will find that
+their SMP and memory barrier semantics are similar in shape and scope
+to the atomic_t ops above.
+
+Native atomic bit operations are defined to operate on objects aligned
+to the size of an "unsigned long" C data type, and are least of that
+size.  The endianness of the bits within each "unsigned long" are the
+native endianness of the cpu.
+
+	void set_bit(unsigned long nr, volatils unsigned long *addr);
+	void clear_bit(unsigned long nr, volatils unsigned long *addr);
+	void change_bit(unsigned long nr, volatils unsigned long *addr);
+
+These routines set, clear, and change, respectively, the bit number
+indicated by "nr" on the bit mask pointed to by "ADDR".
+
+They must execute atomically, yet there are no implicit memory barrier
+semantics required of these interfaces.
+
+	int test_and_set_bit(unsigned long nr, volatils unsigned long *addr);
+	int test_and_clear_bit(unsigned long nr, volatils unsigned long *addr);
+	int test_and_change_bit(unsigned long nr, volatils unsigned long *addr);
+
+Like the above, except that these routines return a boolean which
+indicates whether the changed bit was set _BEFORE_ the atomic bit
+operation.
+
+WARNING! It is incredibly important that the value be a boolean,
+ie. "0" or "1".  Do not try to be fancy and save a few instructions by
+declaring the above to return "long" and just returning something like
+"old_val & mask" because that will not work.
+
+For one thing, this return value gets truncated to int in many code
+paths using these interfaces, so on 64-bit if the bit is set in the
+upper 32-bits then testers will never see that.
+
+One great example of where this problem crops up are the thread_info
+flag operations.  Routines such as test_and_set_ti_thread_flag() chop
+the return value into an int.  There are other places where things
+like this occur as well.
+
+These routines, like the atomic_t counter operations returning values,
+require explicit memory barrier semantics around their execution.  All
+memory operations before the atomic bit operation call must be made
+visible globally before the atomic bit operation is made visible.
+Likewise, the atomic bit operation must be visible globally before any
+subsequent memory operation is made visible.  For example:
+
+	obj->dead = 1;
+	if (test_and_set_bit(0, &obj->flags))
+		/* ... */;
+	obj->killed = 1;
+
+The implementation of test_and_set_bit() must guarentee that
+"obj->dead = 1;" is visible to cpus before the atomic memory operation
+done by test_and_set_bit() becomes visible.  Likewise, the atomic
+memory operation done by test_and_set_bit() must become visible before
+"obj->killed = 1;" is visible.
+
+Finally there is the basic operation:
+
+	int test_bit(unsigned long nr, __const__ volatile unsigned long *addr);
+
+Which returns a boolean indicating if bit "nr" is set in the bitmask
+pointed to by "addr".
+
+If explicit memory barriers are required around clear_bit() (which
+does not return a value, and thus does not need to provide memory
+barrier semantics), two interfaces are provided:
+
+	void smp_mb__before_clear_bit(void);
+	void smp_mb__after_clear_bit(void);
+
+They are used as follows, and are akin to their atomic_t operation
+brothers:
+
+	/* All memory operations before this call will
+	 * be globally visible before the clear_bit().
+	 */
+	smp_mb__before_clear_bit();
+	clear_bit( ... );
+
+	/* The clear_bit() will be visible before all
+	 * subsequent memory operations.
+	 */
+	 smp_mb__after_clear_bit();
+
+Finally, there are non-atomic versions of the bitmask operations
+provided.  They are used in contexts where some other higher-level SMP
+locking scheme is being used to protect the bitmask, and thus less
+expensive non-atomic operations may be used in the implementation.
+They have names similar to the above bitmask operation interfaces,
+except that two underscores are prefixed to the interface name.
+
+	void __set_bit(unsigned long nr, volatile unsigned long *addr);
+	void __clear_bit(unsigned long nr, volatile unsigned long *addr);
+	void __change_bit(unsigned long nr, volatile unsigned long *addr);
+	int __test_and_set_bit(unsigned long nr, volatile unsigned long *addr);
+	int __test_and_clear_bit(unsigned long nr, volatile unsigned long *addr);
+	int __test_and_change_bit(unsigned long nr, volatile unsigned long *addr);
+
+These non-atomic variants also do not require any special memory
+barrier semantics.