Merge tag 'soc2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull arm-soc: soc specific changes (part 2) from Olof Johansson:
 "This adds support for the spear13xx platform, which has first been
  under review a long time ago and finally been completed after generic
  spear work has gone into the clock, dt and pinctrl branches.

  Also a number of updates for the samsung socs are part of this branch."

Fix up trivial conflicts in drivers/gpio/gpio-samsung.c that look much
worse than they are: the exonys5 init code was refactored in commit
fd454997 ("gpio: samsung: refactor gpiolib init for exynos4/5"), and
then commit f10590c9 ("ARM: EXYNOS: add GPC4 bank instance") added a
new gpio chip define and did tiny updates to the init code.

So the conflict diff looks like hell, but it's actually a fairly simple
change.

* tag 'soc2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (34 commits)
  ARM: exynos: fix building with CONFIG_OF disabled
  ARM: EXYNOS: Add AUXDATA for i2c controllers
  ARM: dts: Update device tree source files for EXYNOS5250
  ARM: EXYNOS: Add device tree support for interrupt combiner
  ARM: EXYNOS: Add irq_domain support for interrupt combiner
  ARM: EXYNOS: Remove a new bus_type instance for EXYNOS5
  ARM: EXYNOS: update irqs for EXYNOS5250 SoC
  ARM: EXYNOS: Add pre-divider and fout mux clocks for bpll and mpll
  ARM: EXYNOS: add GPC4 bank instance
  ARM: EXYNOS: Redefine IRQ_MCT_L0,1 definition
  ARM: EXYNOS: Modify the GIC physical address for static io-mapping
  ARM: EXYNOS: Add watchdog timer clock instance
  pinctrl: SPEAr1310: Fix pin numbers for clcd_high_res
  SPEAr: Update MAINTAINERS and Documentation
  SPEAr13xx: Add defconfig
  SPEAr13xx: Add compilation support
  SPEAr13xx: Add dts and dtsi files
  pinctrl: Add SPEAr13xx pinctrl drivers
  pinctrl: SPEAr: Create macro for declaring GPIO PINS
  SPEAr13xx: Add common clock framework support
  ...

Documentation/arm/SPEAr/overview.txt

@@ -8,9 +8,8 @@ Introduction
   weblink : http://www.st.com/spear
 
   The ST Microelectronics SPEAr range of ARM9/CortexA9 System-on-Chip CPUs are
-  supported by the 'spear' platform of ARM Linux. Currently SPEAr300,
-  SPEAr310, SPEAr320 and SPEAr600 SOCs are supported. Support for the SPEAr13XX
-  series is in progress.
+  supported by the 'spear' platform of ARM Linux. Currently SPEAr1310,
+  SPEAr1340, SPEAr300, SPEAr310, SPEAr320 and SPEAr600 SOCs are supported.
 
   Hierarchy in SPEAr is as follows:
 
@@ -26,33 +25,36 @@ Introduction
 		- SPEAr600 (SOC)
 			- SPEAr600 Evaluation Board
 	- SPEAr13XX (13XX SOC series, based on ARM CORTEXA9)
-		- SPEAr1300 (SOC)
+		- SPEAr1310 (SOC)
+			- SPEAr1310 Evaluation Board
+		- SPEAr1340 (SOC)
+			- SPEAr1340 Evaluation Board
 
   Configuration
   -------------
 
   A generic configuration is provided for each machine, and can be used as the
   default by
-	make spear600_defconfig
-	make spear300_defconfig
-	make spear310_defconfig
-	make spear320_defconfig
+	make spear13xx_defconfig
+	make spear3xx_defconfig
+	make spear6xx_defconfig
 
   Layout
   ------
 
-  The common files for multiple machine families (SPEAr3XX, SPEAr6XX and
-  SPEAr13XX) are located in the platform code contained in arch/arm/plat-spear
+  The common files for multiple machine families (SPEAr3xx, SPEAr6xx and
+  SPEAr13xx) are located in the platform code contained in arch/arm/plat-spear
   with headers in plat/.
 
   Each machine series have a directory with name arch/arm/mach-spear followed by
   series name. Like mach-spear3xx, mach-spear6xx and mach-spear13xx.
 
-  Common file for machines of spear3xx family is mach-spear3xx/spear3xx.c and for
-  spear6xx is mach-spear6xx/spear6xx.c. mach-spear* also contain soc/machine
-  specific files, like spear300.c, spear310.c, spear320.c and spear600.c.
-  mach-spear* doesn't contains board specific files as they fully support
-  Flattened Device Tree.
+  Common file for machines of spear3xx family is mach-spear3xx/spear3xx.c, for
+  spear6xx is mach-spear6xx/spear6xx.c and for spear13xx family is
+  mach-spear13xx/spear13xx.c. mach-spear* also contain soc/machine specific
+  files, like spear1310.c, spear1340.c spear300.c, spear310.c, spear320.c and
+  spear600.c.  mach-spear* doesn't contains board specific files as they fully
+  support Flattened Device Tree.
 
 
   Document Author

Documentation/devicetree/bindings/arm/samsung/interrupt-combiner.txt

+* Samsung Exynos Interrupt Combiner Controller
+
+Samsung's Exynos4 architecture includes a interrupt combiner controller which
+can combine interrupt sources as a group and provide a single interrupt request
+for the group. The interrupt request from each group are connected to a parent
+interrupt controller, such as GIC in case of Exynos4210.
+
+The interrupt combiner controller consists of multiple combiners. Upto eight
+interrupt sources can be connected to a combiner. The combiner outputs one
+combined interrupt for its eight interrupt sources. The combined interrupt
+is usually connected to a parent interrupt controller.
+
+A single node in the device tree is used to describe the interrupt combiner
+controller module (which includes multiple combiners). A combiner in the
+interrupt controller module shares config/control registers with other
+combiners. For example, a 32-bit interrupt enable/disable config register
+can accommodate upto 4 interrupt combiners (with each combiner supporting
+upto 8 interrupt sources).
+
+Required properties:
+- compatible: should be "samsung,exynos4210-combiner".
+- interrupt-controller: Identifies the node as an interrupt controller.
+- #interrupt-cells: should be <2>. The meaning of the cells are
+	* First Cell: Combiner Group Number.
+	* Second Cell: Interrupt number within the group.
+- reg: Base address and size of interrupt combiner registers.
+- interrupts: The list of interrupts generated by the combiners which are then
+    connected to a parent interrupt controller. The format of the interrupt
+    specifier depends in the interrupt parent controller.
+
+Optional properties:
+- samsung,combiner-nr: The number of interrupt combiners supported. If this
+  property is not specified, the default number of combiners is assumed
+  to be 16.
+- interrupt-parent: pHandle of the parent interrupt controller, if not
+  inherited from the parent node.
+
+
+Example:
+
+	The following is a an example from the Exynos4210 SoC dtsi file.
+
+	combiner:interrupt-controller@10440000 {
+		compatible = "samsung,exynos4210-combiner";
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		reg = <0x10440000 0x1000>;
+		interrupts = <0 0 0>, <0 1 0>, <0 2 0>, <0 3 0>,
+			     <0 4 0>, <0 5 0>, <0 6 0>, <0 7 0>,
+			     <0 8 0>, <0 9 0>, <0 10 0>, <0 11 0>,
+			     <0 12 0>, <0 13 0>, <0 14 0>, <0 15 0>;
+	};

Documentation/devicetree/bindings/arm/spear.txt

@@ -2,25 +2,25 @@ ST SPEAr Platforms Device Tree Bindings
 ---------------------------------------
 
 Boards with the ST SPEAr600 SoC shall have the following properties:
-
 Required root node property:
-
 compatible = "st,spear600";
 
 Boards with the ST SPEAr300 SoC shall have the following properties:
-
 Required root node property:
-
 compatible = "st,spear300";
 
 Boards with the ST SPEAr310 SoC shall have the following properties:
-
 Required root node property:
-
 compatible = "st,spear310";
 
 Boards with the ST SPEAr320 SoC shall have the following properties:
+Required root node property:
+compatible = "st,spear320";
 
+Boards with the ST SPEAr1310 SoC shall have the following properties:
 Required root node property:
+compatible = "st,spear1310";
 
-compatible = "st,spear320";
+Boards with the ST SPEAr1340 SoC shall have the following properties:
+Required root node property:
+compatible = "st,spear1340";

Documentation/devicetree/bindings/pinctrl/pinctrl_spear.txt

@@ -4,6 +4,8 @@ Required properties:
 - compatible	: "st,spear300-pinmux"
 		: "st,spear310-pinmux"
 		: "st,spear320-pinmux"
+		: "st,spear1310-pinmux"
+		: "st,spear1340-pinmux"
 - reg		: Address range of the pinctrl registers
 - st,pinmux-mode: Mandatory for SPEAr300 and SPEAr320 and invalid for others.
 	- Its values for SPEAr300:
@@ -89,6 +91,37 @@ For SPEAr320 machines:
 	"rmii0_1_grp", "i2c1_8_9_grp", "i2c1_98_99_grp", "i2c2_0_1_grp",
 	"i2c2_2_3_grp", "i2c2_19_20_grp", "i2c2_75_76_grp", "i2c2_96_97_grp"
 
+For SPEAr1310 machines:
+	"i2c0_grp", "ssp0_grp", "ssp0_cs0_grp", "ssp0_cs1_2_grp", "i2s0_grp",
+	"i2s1_grp", "clcd_grp", "clcd_high_res_grp", "arm_gpio_grp",
+	"smi_2_chips_grp", "smi_4_chips_grp", "gmii_grp", "rgmii_grp",
+	"smii_0_1_2_grp", "ras_mii_txclk_grp", "nand_8bit_grp",
+	"nand_16bit_grp", "nand_4_chips_grp", "keyboard_6x6_grp",
+	"keyboard_rowcol6_8_grp", "uart0_grp", "uart0_modem_grp",
+	"gpt0_tmr0_grp", "gpt0_tmr1_grp", "gpt1_tmr0_grp", "gpt1_tmr1_grp",
+	"sdhci_grp", "cf_grp", "xd_grp", "touch_xy_grp",
+	"uart1_disable_i2c_grp", "uart1_disable_sd_grp", "uart2_3_grp",
+	"uart4_grp", "uart5_grp", "rs485_0_1_tdm_0_1_grp", "i2c_1_2_grp",
+	"i2c3_dis_smi_clcd_grp", "i2c3_dis_sd_i2s0_grp", "i2c_4_5_dis_smi_grp",
+	"i2c4_dis_sd_grp", "i2c5_dis_sd_grp", "i2c_6_7_dis_kbd_grp",
+	"i2c6_dis_sd_grp", "i2c7_dis_sd_grp", "can0_dis_nor_grp",
+	"can0_dis_sd_grp", "can1_dis_sd_grp", "can1_dis_kbd_grp", "pcie0_grp",
+	"pcie1_grp", "pcie2_grp", "sata0_grp", "sata1_grp", "sata2_grp",
+	"ssp1_dis_kbd_grp", "ssp1_dis_sd_grp", "gpt64_grp"
+
+For SPEAr1340 machines:
+	"pads_as_gpio_grp", "fsmc_8bit_grp", "fsmc_16bit_grp", "fsmc_pnor_grp",
+	"keyboard_row_col_grp", "keyboard_col5_grp", "spdif_in_grp",
+	"spdif_out_grp", "gpt_0_1_grp", "pwm0_grp", "pwm1_grp", "pwm2_grp",
+	"pwm3_grp", "vip_mux_grp", "vip_mux_cam0_grp", "vip_mux_cam1_grp",
+	"vip_mux_cam2_grp", "vip_mux_cam3_grp", "cam0_grp", "cam1_grp",
+	"cam2_grp", "cam3_grp", "smi_grp", "ssp0_grp", "ssp0_cs1_grp",
+	"ssp0_cs2_grp", "ssp0_cs3_grp", "uart0_grp", "uart0_enh_grp",
+	"uart1_grp", "i2s_in_grp", "i2s_out_grp", "gmii_grp", "rgmii_grp",
+	"rmii_grp", "sgmii_grp", "i2c0_grp", "i2c1_grp", "cec0_grp", "cec1_grp",
+	"sdhci_grp", "cf_grp", "xd_grp", "clcd_grp", "arm_trace_grp",
+	"miphy_dbg_grp", "pcie_grp", "sata_grp"
+
 Valid values for function names are:
 For All SPEAr3xx machines:
 	"firda", "i2c0", "ssp_cs", "ssp0", "mii0", "gpio0", "uart0_ext",
@@ -106,3 +139,17 @@ For SPEAr320 machines:
 	"uart2", "uart3", "uart4", "uart5", "uart6", "rs485", "touchscreen",
 	"can0", "can1", "pwm0_1", "pwm2", "pwm3", "ssp1", "ssp2", "mii2",
 	"mii0_1", "i2c1", "i2c2"
+
+
+For SPEAr1310 machines:
+	"i2c0", "ssp0", "i2s0", "i2s1", "clcd", "arm_gpio", "smi", "gmii",
+	"rgmii", "smii_0_1_2", "ras_mii_txclk", "nand", "keyboard", "uart0",
+	"gpt0", "gpt1", "sdhci", "cf", "xd", "touchscreen", "uart1", "uart2_3",
+	"uart4", "uart5", "rs485_0_1_tdm_0_1", "i2c_1_2", "i2c3_i2s1",
+	"i2c_4_5", "i2c_6_7", "can0", "can1", "pci", "sata", "ssp1", "gpt64"
+
+For SPEAr1340 machines:
+	"pads_as_gpio", "fsmc", "keyboard", "spdif_in", "spdif_out", "gpt_0_1",
+	"pwm", "vip", "cam0", "cam1", "cam2", "cam3", "smi", "ssp0", "uart0",
+	"uart1", "i2s", "gmac", "i2c0", "i2c1", "cec0", "cec1", "sdhci", "cf",
+	"xd", "clcd", "arm_trace", "miphy_dbg", "pcie", "sata"

MAINTAINERS

@@ -6350,14 +6350,25 @@ F:	include/linux/compiler.h
 
 SPEAR PLATFORM SUPPORT
 M:	Viresh Kumar <viresh.kumar@st.com>
+M:	Shiraz Hashim <shiraz.hashim@st.com>
 L:	spear-devel@list.st.com
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 W:	http://www.st.com/spear
 S:	Maintained
 F:	arch/arm/plat-spear/
 
+SPEAR13XX MACHINE SUPPORT
+M:	Viresh Kumar <viresh.kumar@st.com>
+M:	Shiraz Hashim <shiraz.hashim@st.com>
+L:	spear-devel@list.st.com
+L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
+W:	http://www.st.com/spear
+S:	Maintained
+F:	arch/arm/mach-spear13xx/
+
 SPEAR3XX MACHINE SUPPORT
 M:	Viresh Kumar <viresh.kumar@st.com>
+M:	Shiraz Hashim <shiraz.hashim@st.com>
 L:	spear-devel@list.st.com
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 W:	http://www.st.com/spear
@@ -6366,6 +6377,8 @@ F:	arch/arm/mach-spear3xx/
 
 SPEAR6XX MACHINE SUPPORT
 M:	Rajeev Kumar <rajeev-dlh.kumar@st.com>
+M:	Shiraz Hashim <shiraz.hashim@st.com>
+M:	Viresh Kumar <viresh.kumar@st.com>
 L:	spear-devel@list.st.com
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 W:	http://www.st.com/spear

arch/arm/Makefile

@@ -186,6 +186,8 @@ machine-$(CONFIG_ARCH_VEXPRESS)		:= vexpress
 machine-$(CONFIG_ARCH_VT8500)		:= vt8500
 machine-$(CONFIG_ARCH_W90X900)		:= w90x900
 machine-$(CONFIG_FOOTBRIDGE)		:= footbridge
+machine-$(CONFIG_MACH_SPEAR1310)	:= spear13xx
+machine-$(CONFIG_MACH_SPEAR1340)	:= spear13xx
 machine-$(CONFIG_MACH_SPEAR300)		:= spear3xx
 machine-$(CONFIG_MACH_SPEAR310)		:= spear3xx
 machine-$(CONFIG_MACH_SPEAR320)		:= spear3xx

arch/arm/boot/dts/exynos5250-smdk5250.dts

@@ -23,4 +23,52 @@ memory {
 	chosen {
 		bootargs = "root=/dev/ram0 rw ramdisk=8192 console=ttySAC1,115200";
 	};
+
+	i2c@12C60000 {
+		samsung,i2c-sda-delay = <100>;
+		samsung,i2c-max-bus-freq = <20000>;
+		gpios = <&gpb3 0 2 3 0>,
+			<&gpb3 1 2 3 0>;
+
+		eeprom@50 {
+			compatible = "samsung,s524ad0xd1";
+			reg = <0x50>;
+		};
+	};
+
+	i2c@12C70000 {
+		samsung,i2c-sda-delay = <100>;
+		samsung,i2c-max-bus-freq = <20000>;
+		gpios = <&gpb3 2 2 3 0>,
+			<&gpb3 3 2 3 0>;
+
+		eeprom@51 {
+			compatible = "samsung,s524ad0xd1";
+			reg = <0x51>;
+		};
+	};
+
+	i2c@12C80000 {
+		status = "disabled";
+	};
+
+	i2c@12C90000 {
+		status = "disabled";
+	};
+
+	i2c@12CA0000 {
+		status = "disabled";
+	};
+
+	i2c@12CB0000 {
+		status = "disabled";
+	};
+
+	i2c@12CC0000 {
+		status = "disabled";
+	};
+
+	i2c@12CD0000 {
+		status = "disabled";
+	};
 };

arch/arm/boot/dts/exynos5250.dtsi

@@ -23,11 +23,11 @@ / {
 	compatible = "samsung,exynos5250";
 	interrupt-parent = <&gic>;
 
-	gic:interrupt-controller@10490000 {
+	gic:interrupt-controller@10481000 {
 		compatible = "arm,cortex-a9-gic";
 		#interrupt-cells = <3>;
 		interrupt-controller;
-		reg = <0x10490000 0x1000>, <0x10480000 0x100>;
+		reg = <0x10481000 0x1000>, <0x10482000 0x2000>;
 	};
 
 	watchdog {
@@ -42,30 +42,6 @@ rtc {
 		interrupts = <0 43 0>, <0 44 0>;
 	};
 
-	sdhci@12200000 {
-		compatible = "samsung,exynos4210-sdhci";
-		reg = <0x12200000 0x100>;
-		interrupts = <0 75 0>;
-	};
-
-	sdhci@12210000 {
-		compatible = "samsung,exynos4210-sdhci";
-		reg = <0x12210000 0x100>;
-		interrupts = <0 76 0>;
-	};
-
-	sdhci@12220000 {
-		compatible = "samsung,exynos4210-sdhci";
-		reg = <0x12220000 0x100>;
-		interrupts = <0 77 0>;
-	};
-
-	sdhci@12230000 {
-		compatible = "samsung,exynos4210-sdhci";
-		reg = <0x12230000 0x100>;
-		interrupts = <0 78 0>;
-	};
-
 	serial@12C00000 {
 		compatible = "samsung,exynos4210-uart";
 		reg = <0x12C00000 0x100>;
@@ -94,48 +70,64 @@ i2c@12C60000 {
 		compatible = "samsung,s3c2440-i2c";
 		reg = <0x12C60000 0x100>;
 		interrupts = <0 56 0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
 	};
 
 	i2c@12C70000 {
 		compatible = "samsung,s3c2440-i2c";
 		reg = <0x12C70000 0x100>;
 		interrupts = <0 57 0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
 	};
 
 	i2c@12C80000 {
 		compatible = "samsung,s3c2440-i2c";
 		reg = <0x12C80000 0x100>;
 		interrupts = <0 58 0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
 	};
 
 	i2c@12C90000 {
 		compatible = "samsung,s3c2440-i2c";
 		reg = <0x12C90000 0x100>;
 		interrupts = <0 59 0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
 	};
 
 	i2c@12CA0000 {
 		compatible = "samsung,s3c2440-i2c";
 		reg = <0x12CA0000 0x100>;
 		interrupts = <0 60 0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
 	};
 
 	i2c@12CB0000 {
 		compatible = "samsung,s3c2440-i2c";
 		reg = <0x12CB0000 0x100>;
 		interrupts = <0 61 0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
 	};
 
 	i2c@12CC0000 {
 		compatible = "samsung,s3c2440-i2c";
 		reg = <0x12CC0000 0x100>;
 		interrupts = <0 62 0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
 	};
 
 	i2c@12CD0000 {
 		compatible = "samsung,s3c2440-i2c";
 		reg = <0x12CD0000 0x100>;
 		interrupts = <0 63 0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
 	};
 
 	amba {
@@ -157,13 +149,13 @@ pdma1: pdma@121B0000 {
 			interrupts = <0 35 0>;
 		};
 
-		mdma0: pdma@10800000 {
+		mdma0: mdma@10800000 {
 			compatible = "arm,pl330", "arm,primecell";
 			reg = <0x10800000 0x1000>;
 			interrupts = <0 33 0>;
 		};
 
-		mdma1: pdma@11C10000 {
+		mdma1: mdma@11C10000 {
 			compatible = "arm,pl330", "arm,primecell";
 			reg = <0x11C10000 0x1000>;
 			interrupts = <0 124 0>;
@@ -242,6 +234,12 @@ gpc3: gpio-controller@11400140 {
 			#gpio-cells = <4>;
 		};
 
+		gpc4: gpio-controller@114002E0 {
+			compatible = "samsung,exynos4-gpio";
+			reg = <0x114002E0 0x20>;
+			#gpio-cells = <4>;
+		};
+
 		gpd0: gpio-controller@11400160 {
 			compatible = "samsung,exynos4-gpio";
 			reg = <0x11400160 0x20>;
@@ -388,19 +386,19 @@ gpv1: gpio-controller@10D10020 {
 
 		gpv2: gpio-controller@10D10040 {
 			compatible = "samsung,exynos4-gpio";
-			reg = <0x10D10040 0x20>;
+			reg = <0x10D10060 0x20>;
 			#gpio-cells = <4>;
 		};
 
 		gpv3: gpio-controller@10D10060 {
 			compatible = "samsung,exynos4-gpio";
-			reg = <0x10D10060 0x20>;
+			reg = <0x10D10080 0x20>;
 			#gpio-cells = <4>;
 		};
 
 		gpv4: gpio-controller@10D10080 {
 			compatible = "samsung,exynos4-gpio";
-			reg = <0x10D10080 0x20>;
+			reg = <0x10D100C0 0x20>;
 			#gpio-cells = <4>;
 		};
 

arch/arm/boot/dts/spear1310-evb.dts

+/*
+ * DTS file for SPEAr1310 Evaluation Baord
+ *
+ * Copyright 2012 Viresh Kumar <viresh.kumar@st.com>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+/include/ "spear1310.dtsi"
+
+/ {
+	model = "ST SPEAr1310 Evaluation Board";
+	compatible = "st,spear1310-evb", "st,spear1310";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	memory {
+		reg = <0 0x40000000>;
+	};
+
+	ahb {
+		pinmux@e0700000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&state_default>;
+
+			state_default: pinmux {
+				i2c0-pmx {
+					st,pins = "i2c0_grp";
+					st,function = "i2c0";
+				};
+				i2s1 {
+					st,pins = "i2s1_grp";
+					st,function = "i2s1";
+				};
+				gpio {
+					st,pins = "arm_gpio_grp";
+					st,function = "arm_gpio";
+				};
+				eth {
+					st,pins = "gmii_grp";
+					st,function = "gmii";
+				};
+				ssp0 {
+					st,pins = "ssp0_grp";
+					st,function = "ssp0";
+				};
+				kbd {
+					st,pins = "keyboard_6x6_grp";
+					st,function = "keyboard";
+				};
+				sdhci {
+					st,pins = "sdhci_grp";
+					st,function = "sdhci";
+				};
+				smi-pmx {
+					st,pins = "smi_2_chips_grp";
+					st,function = "smi";
+				};
+				uart0 {
+					st,pins = "uart0_grp";
+					st,function = "uart0";
+				};
+				rs485 {
+					st,pins = "rs485_0_1_tdm_0_1_grp";
+					st,function = "rs485_0_1_tdm_0_1";
+				};
+				i2c1_2 {
+					st,pins = "i2c_1_2_grp";
+					st,function = "i2c_1_2";
+				};
+				pci {
+					st,pins = "pcie0_grp","pcie1_grp",
+						"pcie2_grp";
+					st,function = "pci";
+				};
+				smii {
+					st,pins = "smii_0_1_2_grp";
+					st,function = "smii_0_1_2";
+				};
+				nand {
+					st,pins = "nand_8bit_grp",
+						"nand_16bit_grp";
+					st,function = "nand";
+				};
+			};
+		};
+
+		ahci@b1000000 {
+			status = "okay";
+		};
+
+		cf@b2800000 {
+			status = "okay";
+		};
+
+		dma@ea800000 {
+			status = "okay";
+		};
+
+		dma@eb000000 {
+			status = "okay";
+		};
+
+		fsmc: flash@b0000000 {
+			status = "okay";
+		};
+
+		gmac0: eth@e2000000 {
+			status = "okay";
+		};
+
+		sdhci@b3000000 {
+			status = "okay";
+		};
+
+		smi: flash@ea000000 {
+			status = "okay";
+			clock-rate=<50000000>;
+
+			flash@e6000000 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0xe6000000 0x800000>;
+				st,smi-fast-mode;
+
+				partition@0 {
+					label = "xloader";
+					reg = <0x0 0x10000>;
+				};
+				partition@10000 {
+					label = "u-boot";
+					reg = <0x10000 0x40000>;
+				};
+				partition@50000 {
+					label = "linux";
+					reg = <0x50000 0x2c0000>;
+				};
+				partition@310000 {
+					label = "rootfs";
+					reg = <0x310000 0x4f0000>;
+				};
+			};
+		};
+
+		spi0: spi@e0100000 {
+			status = "okay";
+		};
+
+		ehci@e4800000 {
+			status = "okay";
+		};
+
+		ehci@e5800000 {
+			status = "okay";
+		};
+
+		ohci@e4000000 {
+			status = "okay";
+		};
+
+		ohci@e5000000 {
+			status = "okay";
+		};
+
+		apb {
+			adc@e0080000 {
+				status = "okay";
+			};
+
+			gpio0: gpio@e0600000 {
+			       status = "okay";
+			};
+
+			gpio1: gpio@e0680000 {
+			       status = "okay";
+			};
+
+			i2c0: i2c@e0280000 {
+			       status = "okay";
+			};
+
+			i2c1: i2c@5cd00000 {
+			       status = "okay";
+			};
+
+			kbd@e0300000 {
+				linux,keymap = < 0x00000001
+						 0x00010002
+						 0x00020003
+						 0x00030004
+						 0x00040005
+						 0x00050006
+						 0x00060007
+						 0x00070008
+						 0x00080009
+						 0x0100000a
+						 0x0101000c
+						 0x0102000d
+						 0x0103000e
+						 0x0104000f
+						 0x01050010
+						 0x01060011
+						 0x01070012
+						 0x01080013
+						 0x02000014
+						 0x02010015
+						 0x02020016
+						 0x02030017
+						 0x02040018
+						 0x02050019
+						 0x0206001a
+						 0x0207001b
+						 0x0208001c
+						 0x0300001d
+						 0x0301001e
+						 0x0302001f
+						 0x03030020
+						 0x03040021
+						 0x03050022
+						 0x03060023
+						 0x03070024
+						 0x03080025
+						 0x04000026
+						 0x04010027
+						 0x04020028
+						 0x04030029
+						 0x0404002a
+						 0x0405002b
+						 0x0406002c
+						 0x0407002d
+						 0x0408002e
+						 0x0500002f
+						 0x05010030
+						 0x05020031
+						 0x05030032
+						 0x05040033
+						 0x05050034
+						 0x05060035
+						 0x05070036
+						 0x05080037
+						 0x06000038
+						 0x06010039
+						 0x0602003a
+						 0x0603003b
+						 0x0604003c
+						 0x0605003d
+						 0x0606003e
+						 0x0607003f
+						 0x06080040
+						 0x07000041
+						 0x07010042
+						 0x07020043
+						 0x07030044
+						 0x07040045
+						 0x07050046
+						 0x07060047
+						 0x07070048
+						 0x07080049
+						 0x0800004a
+						 0x0801004b
+						 0x0802004c
+						 0x0803004d
+						 0x0804004e
+						 0x0805004f
+						 0x08060050
+						 0x08070051
+						 0x08080052 >;
+			       autorepeat;
+			       st,mode = <0>;
+			       status = "okay";
+			};
+
+			rtc@e0580000 {
+			       status = "okay";
+			};
+
+			serial@e0000000 {
+			       status = "okay";
+			};
+
+			wdt@ec800620 {
+			       status = "okay";
+			};
+		};
+	};
+};

arch/arm/boot/dts/spear1310.dtsi

+/*
+ * DTS file for all SPEAr1310 SoCs
+ *
+ * Copyright 2012 Viresh Kumar <viresh.kumar@st.com>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/include/ "spear13xx.dtsi"
+
+/ {
+	compatible = "st,spear1310";
+
+	ahb {
+		ahci@b1000000 {
+			compatible = "snps,spear-ahci";
+			reg = <0xb1000000 0x10000>;
+			interrupts = <0 68 0x4>;
+			status = "disabled";
+		};
+
+		ahci@b1800000 {
+			compatible = "snps,spear-ahci";
+			reg = <0xb1800000 0x10000>;
+			interrupts = <0 69 0x4>;
+			status = "disabled";
+		};
+
+		ahci@b4000000 {
+			compatible = "snps,spear-ahci";
+			reg = <0xb4000000 0x10000>;
+			interrupts = <0 70 0x4>;
+			status = "disabled";
+		};
+
+		gmac1: eth@5c400000 {
+			compatible = "st,spear600-gmac";
+			reg = <0x5c400000 0x8000>;
+			interrupts = <0 95 0x4>;
+			interrupt-names = "macirq";
+			status = "disabled";
+		};
+
+		gmac2: eth@5c500000 {
+			compatible = "st,spear600-gmac";
+			reg = <0x5c500000 0x8000>;
+			interrupts = <0 96 0x4>;
+			interrupt-names = "macirq";
+			status = "disabled";
+		};
+
+		gmac3: eth@5c600000 {
+			compatible = "st,spear600-gmac";
+			reg = <0x5c600000 0x8000>;
+			interrupts = <0 97 0x4>;
+			interrupt-names = "macirq";
+			status = "disabled";
+		};
+
+		gmac4: eth@5c700000 {
+			compatible = "st,spear600-gmac";
+			reg = <0x5c700000 0x8000>;
+			interrupts = <0 98 0x4>;
+			interrupt-names = "macirq";
+			status = "disabled";
+		};
+
+		spi1: spi@5d400000 {
+			compatible = "arm,pl022", "arm,primecell";
+			reg = <0x5d400000 0x1000>;
+			interrupts = <0 99 0x4>;
+			status = "disabled";
+		};
+
+		apb {
+			i2c1: i2c@5cd00000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "snps,designware-i2c";
+				reg = <0x5cd00000 0x1000>;
+				interrupts = <0 87 0x4>;
+				status = "disabled";
+			};
+
+			i2c2: i2c@5ce00000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "snps,designware-i2c";
+				reg = <0x5ce00000 0x1000>;
+				interrupts = <0 88 0x4>;
+				status = "disabled";
+			};
+
+			i2c3: i2c@5cf00000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "snps,designware-i2c";
+				reg = <0x5cf00000 0x1000>;
+				interrupts = <0 89 0x4>;
+				status = "disabled";
+			};
+
+			i2c4: i2c@5d000000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "snps,designware-i2c";
+				reg = <0x5d000000 0x1000>;
+				interrupts = <0 90 0x4>;
+				status = "disabled";
+			};
+
+			i2c5: i2c@5d100000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "snps,designware-i2c";
+				reg = <0x5d100000 0x1000>;
+				interrupts = <0 91 0x4>;
+				status = "disabled";
+			};
+
+			i2c6: i2c@5d200000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "snps,designware-i2c";
+				reg = <0x5d200000 0x1000>;
+				interrupts = <0 92 0x4>;
+				status = "disabled";
+			};
+
+			i2c7: i2c@5d300000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "snps,designware-i2c";
+				reg = <0x5d300000 0x1000>;
+				interrupts = <0 93 0x4>;
+				status = "disabled";
+			};
+
+			serial@5c800000 {
+				compatible = "arm,pl011", "arm,primecell";
+				reg = <0x5c800000 0x1000>;
+				interrupts = <0 82 0x4>;
+				status = "disabled";
+			};
+
+			serial@5c900000 {
+				compatible = "arm,pl011", "arm,primecell";
+				reg = <0x5c900000 0x1000>;
+				interrupts = <0 83 0x4>;
+				status = "disabled";
+			};
+
+			serial@5ca00000 {
+				compatible = "arm,pl011", "arm,primecell";
+				reg = <0x5ca00000 0x1000>;
+				interrupts = <0 84 0x4>;
+				status = "disabled";
+			};
+
+			serial@5cb00000 {
+				compatible = "arm,pl011", "arm,primecell";
+				reg = <0x5cb00000 0x1000>;
+				interrupts = <0 85 0x4>;
+				status = "disabled";
+			};
+
+			serial@5cc00000 {
+				compatible = "arm,pl011", "arm,primecell";
+				reg = <0x5cc00000 0x1000>;
+				interrupts = <0 86 0x4>;
+				status = "disabled";
+			};
+
+			thermal@e07008c4 {
+				st,thermal-flags = <0x7000>;
+			};
+		};
+	};
+};

arch/arm/boot/dts/spear1340-evb.dts

+/*
+ * DTS file for SPEAr1340 Evaluation Baord
+ *
+ * Copyright 2012 Viresh Kumar <viresh.kumar@st.com>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+/include/ "spear1340.dtsi"
+
+/ {
+	model = "ST SPEAr1340 Evaluation Board";
+	compatible = "st,spear1340-evb", "st,spear1340";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	memory {
+		reg = <0 0x40000000>;
+	};
+
+	ahb {
+		pinmux@e0700000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&state_default>;
+
+			state_default: pinmux {
+				pads_as_gpio {
+					st,pins = "pads_as_gpio_grp";
+					st,function = "pads_as_gpio";
+				};
+				fsmc {
+					st,pins = "fsmc_8bit_grp";
+					st,function = "fsmc";
+				};
+				kbd {
+					st,pins = "keyboard_row_col_grp",
+						"keyboard_col5_grp";
+					st,function = "keyboard";
+				};
+				uart0 {
+					st,pins = "uart0_grp", "uart0_enh_grp";
+					st,function = "uart0";
+				};
+				i2c0-pmx {
+					st,pins = "i2c0_grp";
+					st,function = "i2c0";
+				};
+				i2c1-pmx {
+					st,pins = "i2c1_grp";
+					st,function = "i2c1";
+				};
+				spdif-in {
+					st,pins = "spdif_in_grp";
+					st,function = "spdif_in";
+				};
+				spdif-out {
+					st,pins = "spdif_out_grp";
+					st,function = "spdif_out";
+				};
+				ssp0 {
+					st,pins = "ssp0_grp", "ssp0_cs1_grp",
+						"ssp0_cs3_grp";
+					st,function = "ssp0";
+				};
+				pwm {
+					st,pins = "pwm2_grp", "pwm3_grp";
+					st,function = "pwm";
+				};
+				smi-pmx {
+					st,pins = "smi_grp";
+					st,function = "smi";
+				};
+				i2s {
+					st,pins = "i2s_in_grp", "i2s_out_grp";
+					st,function = "i2s";
+				};
+				gmac {
+					st,pins = "gmii_grp", "rgmii_grp";
+					st,function = "gmac";
+				};
+				cam3 {
+					st,pins = "cam3_grp";
+					st,function = "cam3";
+				};
+				cec0 {
+					st,pins = "cec0_grp";
+					st,function = "cec0";
+				};
+				cec1 {
+					st,pins = "cec1_grp";
+					st,function = "cec1";
+				};
+				sdhci {
+					st,pins = "sdhci_grp";
+					st,function = "sdhci";
+				};
+				clcd {
+					st,pins = "clcd_grp";
+					st,function = "clcd";
+				};
+				sata {
+					st,pins = "sata_grp";
+					st,function = "sata";
+				};
+			};
+		};
+
+		dma@ea800000 {
+			status = "okay";
+		};
+
+		dma@eb000000 {
+			status = "okay";
+		};
+
+		fsmc: flash@b0000000 {
+			status = "okay";
+		};
+
+		gmac0: eth@e2000000 {
+			status = "okay";
+		};
+
+		sdhci@b3000000 {
+			status = "okay";
+		};
+
+		smi: flash@ea000000 {
+			status = "okay";
+			clock-rate=<50000000>;
+
+			flash@e6000000 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0xe6000000 0x800000>;
+				st,smi-fast-mode;
+
+				partition@0 {
+					label = "xloader";
+					reg = <0x0 0x10000>;
+				};
+				partition@10000 {
+					label = "u-boot";
+					reg = <0x10000 0x40000>;
+				};
+				partition@50000 {
+					label = "linux";
+					reg = <0x50000 0x2c0000>;
+				};
+				partition@310000 {
+					label = "rootfs";
+					reg = <0x310000 0x4f0000>;
+				};
+			};
+		};
+
+		spi0: spi@e0100000 {
+			status = "okay";
+		};
+
+		ehci@e4800000 {
+			status = "okay";
+		};
+
+		ehci@e5800000 {
+			status = "okay";
+		};
+
+		ohci@e4000000 {
+			status = "okay";
+		};
+
+		ohci@e5000000 {
+			status = "okay";
+		};
+
+		apb {
+			adc@e0080000 {
+				status = "okay";
+			};
+
+			gpio0: gpio@e0600000 {
+			       status = "okay";
+			};
+
+			gpio1: gpio@e0680000 {
+			       status = "okay";
+			};
+
+			i2c0: i2c@e0280000 {
+			       status = "okay";
+			};
+
+			i2c1: i2c@b4000000 {
+			       status = "okay";
+			};
+
+			kbd@e0300000 {
+				linux,keymap = < 0x00000001
+						 0x00010002
+						 0x00020003
+						 0x00030004
+						 0x00040005
+						 0x00050006
+						 0x00060007
+						 0x00070008
+						 0x00080009
+						 0x0100000a
+						 0x0101000c
+						 0x0102000d
+						 0x0103000e
+						 0x0104000f
+						 0x01050010
+						 0x01060011
+						 0x01070012
+						 0x01080013
+						 0x02000014
+						 0x02010015
+						 0x02020016
+						 0x02030017
+						 0x02040018
+						 0x02050019
+						 0x0206001a
+						 0x0207001b
+						 0x0208001c
+						 0x0300001d
+						 0x0301001e
+						 0x0302001f
+						 0x03030020
+						 0x03040021
+						 0x03050022
+						 0x03060023
+						 0x03070024
+						 0x03080025
+						 0x04000026
+						 0x04010027
+						 0x04020028
+						 0x04030029
+						 0x0404002a
+						 0x0405002b
+						 0x0406002c
+						 0x0407002d
+						 0x0408002e
+						 0x0500002f
+						 0x05010030
+						 0x05020031
+						 0x05030032
+						 0x05040033
+						 0x05050034
+						 0x05060035
+						 0x05070036
+						 0x05080037
+						 0x06000038
+						 0x06010039
+						 0x0602003a
+						 0x0603003b
+						 0x0604003c
+						 0x0605003d
+						 0x0606003e
+						 0x0607003f
+						 0x06080040
+						 0x07000041
+						 0x07010042
+						 0x07020043
+						 0x07030044
+						 0x07040045
+						 0x07050046
+						 0x07060047
+						 0x07070048
+						 0x07080049
+						 0x0800004a
+						 0x0801004b
+						 0x0802004c
+						 0x0803004d
+						 0x0804004e
+						 0x0805004f
+						 0x08060050
+						 0x08070051
+						 0x08080052 >;
+			       autorepeat;
+			       st,mode = <0>;
+			       status = "okay";
+			};
+
+			rtc@e0580000 {
+			       status = "okay";
+			};
+
+			serial@e0000000 {
+			       status = "okay";
+			};
+
+			serial@b4100000 {
+			       status = "okay";
+			};
+
+			wdt@ec800620 {
+			       status = "okay";
+			};
+		};
+	};
+};

arch/arm/boot/dts/spear1340.dtsi

+/*
+ * DTS file for all SPEAr1340 SoCs
+ *
+ * Copyright 2012 Viresh Kumar <viresh.kumar@st.com>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/include/ "spear13xx.dtsi"
+
+/ {
+	compatible = "st,spear1340";
+
+	ahb {
+		ahci@b1000000 {
+			compatible = "snps,spear-ahci";
+			reg = <0xb1000000 0x10000>;
+			interrupts = <0 72 0x4>;
+			status = "disabled";
+		};
+
+		spi1: spi@5d400000 {
+			compatible = "arm,pl022", "arm,primecell";
+			reg = <0x5d400000 0x1000>;
+			interrupts = <0 99 0x4>;
+			status = "disabled";
+		};
+
+		apb {
+			i2c1: i2c@b4000000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "snps,designware-i2c";
+				reg = <0xb4000000 0x1000>;
+				interrupts = <0 104 0x4>;
+				status = "disabled";
+			};
+
+			serial@b4100000 {
+				compatible = "arm,pl011", "arm,primecell";
+				reg = <0xb4100000 0x1000>;
+				interrupts = <0 105 0x4>;
+				status = "disabled";
+			};
+
+			thermal@e07008c4 {
+				st,thermal-flags = <0x2a00>;
+			};
+		};
+	};
+};

arch/arm/boot/dts/spear13xx.dtsi

+/*
+ * DTS file for all SPEAr13xx SoCs
+ *
+ * Copyright 2012 Viresh Kumar <viresh.kumar@st.com>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/include/ "skeleton.dtsi"
+
+/ {
+	interrupt-parent = <&gic>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			compatible = "arm,cortex-a9";
+			reg = <0>;
+			next-level-cache = <&L2>;
+		};
+
+		cpu@1 {
+			compatible = "arm,cortex-a9";
+			reg = <1>;
+			next-level-cache = <&L2>;
+		};
+	};
+
+	gic: interrupt-controller@ec801000 {
+		compatible = "arm,cortex-a9-gic";
+		interrupt-controller;
+		#interrupt-cells = <3>;
+		reg = < 0xec801000 0x1000 >,
+		      < 0xec800100 0x0100 >;
+	};
+
+	pmu {
+		compatible = "arm,cortex-a9-pmu";
+		interrupts = <0 8 0x04
+			      0 9 0x04>;
+	};
+
+	L2: l2-cache {
+		    compatible = "arm,pl310-cache";
+		    reg = <0xed000000 0x1000>;
+		    cache-unified;
+		    cache-level = <2>;
+	};
+
+	memory {
+		name = "memory";
+		device_type = "memory";
+		reg = <0 0x40000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyAMA0,115200";
+	};
+
+	ahb {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		ranges = <0x50000000 0x50000000 0x10000000
+			  0xb0000000 0xb0000000 0x10000000
+			  0xe0000000 0xe0000000 0x10000000>;
+
+		sdhci@b3000000 {
+			compatible = "st,sdhci-spear";
+			reg = <0xb3000000 0x100>;
+			interrupts = <0 28 0x4>;
+			status = "disabled";
+		};
+
+		cf@b2800000 {
+			compatible = "arasan,cf-spear1340";
+			reg = <0xb2800000 0x100>;
+			interrupts = <0 29 0x4>;
+			status = "disabled";
+		};
+
+		dma@ea800000 {
+			compatible = "snps,dma-spear1340";
+			reg = <0xea800000 0x1000>;
+			interrupts = <0 19 0x4>;
+			status = "disabled";
+		};
+
+		dma@eb000000 {
+			compatible = "snps,dma-spear1340";
+			reg = <0xeb000000 0x1000>;
+			interrupts = <0 59 0x4>;
+			status = "disabled";
+		};
+
+		fsmc: flash@b0000000 {
+			compatible = "st,spear600-fsmc-nand";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0xb0000000 0x1000	/* FSMC Register */
+			       0xb0800000 0x0010>;	/* NAND Base */
+			reg-names = "fsmc_regs", "nand_data";
+			interrupts = <0 20 0x4
+				      0 21 0x4
+				      0 22 0x4
+				      0 23 0x4>;
+			st,ale-off = <0x20000>;
+			st,cle-off = <0x10000>;
+			status = "disabled";
+		};
+
+		gmac0: eth@e2000000 {
+			compatible = "st,spear600-gmac";
+			reg = <0xe2000000 0x8000>;
+			interrupts = <0 23 0x4
+				      0 24 0x4>;
+			interrupt-names = "macirq", "eth_wake_irq";
+			status = "disabled";
+		};
+
+		smi: flash@ea000000 {
+			compatible = "st,spear600-smi";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0xea000000 0x1000>;
+			interrupts = <0 30 0x4>;
+			status = "disabled";
+		};
+
+		spi0: spi@e0100000 {
+			compatible = "arm,pl022", "arm,primecell";
+			reg = <0xe0100000 0x1000>;
+			interrupts = <0 31 0x4>;
+			status = "disabled";
+		};
+
+		ehci@e4800000 {
+			compatible = "st,spear600-ehci", "usb-ehci";
+			reg = <0xe4800000 0x1000>;
+			interrupts = <0 64 0x4>;
+			status = "disabled";
+		};
+
+		ehci@e5800000 {
+			compatible = "st,spear600-ehci", "usb-ehci";
+			reg = <0xe5800000 0x1000>;
+			interrupts = <0 66 0x4>;
+			status = "disabled";
+		};
+
+		ohci@e4000000 {
+			compatible = "st,spear600-ohci", "usb-ohci";
+			reg = <0xe4000000 0x1000>;
+			interrupts = <0 65 0x4>;
+			status = "disabled";
+		};
+
+		ohci@e5000000 {
+			compatible = "st,spear600-ohci", "usb-ohci";
+			reg = <0xe5000000 0x1000>;
+			interrupts = <0 67 0x4>;
+			status = "disabled";
+		};
+
+		apb {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "simple-bus";
+			ranges = <0x50000000 0x50000000 0x10000000
+				  0xb0000000 0xb0000000 0x10000000
+				  0xe0000000 0xe0000000 0x10000000>;
+
+			gpio0: gpio@e0600000 {
+				compatible = "arm,pl061", "arm,primecell";
+				reg = <0xe0600000 0x1000>;
+				interrupts = <0 24 0x4>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				status = "disabled";
+			};
+
+			gpio1: gpio@e0680000 {
+				compatible = "arm,pl061", "arm,primecell";
+				reg = <0xe0680000 0x1000>;
+				interrupts = <0 25 0x4>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				status = "disabled";
+			};
+
+			kbd@e0300000 {
+				compatible = "st,spear300-kbd";
+				reg = <0xe0300000 0x1000>;
+				status = "disabled";
+			};
+
+			i2c0: i2c@e0280000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "snps,designware-i2c";
+				reg = <0xe0280000 0x1000>;
+				interrupts = <0 41 0x4>;
+				status = "disabled";
+			};
+
+			rtc@e0580000 {
+				compatible = "st,spear-rtc";
+				reg = <0xe0580000 0x1000>;
+				interrupts = <0 36 0x4>;
+				status = "disabled";
+			};
+
+			serial@e0000000 {
+				compatible = "arm,pl011", "arm,primecell";
+				reg = <0xe0000000 0x1000>;
+				interrupts = <0 36 0x4>;
+				status = "disabled";
+			};
+
+			adc@e0080000 {
+				compatible = "st,spear600-adc";
+				reg = <0xe0080000 0x1000>;
+				interrupts = <0 44 0x4>;
+				status = "disabled";
+			};
+
+			timer@e0380000 {
+				compatible = "st,spear-timer";
+				reg = <0xe0380000 0x400>;
+				interrupts = <0 37 0x4>;
+			};
+
+			timer@ec800600 {
+				compatible = "arm,cortex-a9-twd-timer";
+				reg = <0xec800600 0x20>;
+				interrupts = <1 13 0x301>;
+			};
+
+			wdt@ec800620 {
+				compatible = "arm,cortex-a9-twd-wdt";
+				reg = <0xec800620 0x20>;
+				status = "disabled";
+			};
+
+			thermal@e07008c4 {
+				compatible = "st,thermal-spear1340";
+				reg = <0xe07008c4 0x4>;
+			};
+		};
+	};
+};

arch/arm/configs/spear13xx_defconfig

+CONFIG_EXPERIMENTAL=y
+CONFIG_SYSVIPC=y
+CONFIG_BSD_PROCESS_ACCT=y
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODVERSIONS=y
+CONFIG_PARTITION_ADVANCED=y
+CONFIG_PLAT_SPEAR=y
+CONFIG_ARCH_SPEAR13XX=y
+CONFIG_MACH_SPEAR1310=y
+CONFIG_MACH_SPEAR1340=y
+# CONFIG_SWP_EMULATE is not set
+CONFIG_SMP=y
+# CONFIG_SMP_ON_UP is not set
+# CONFIG_ARM_CPU_TOPOLOGY is not set
+CONFIG_ARM_APPENDED_DTB=y
+CONFIG_ARM_ATAG_DTB_COMPAT=y
+CONFIG_BINFMT_MISC=y
+CONFIG_NET=y
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_MTD=y
+CONFIG_MTD_OF_PARTS=y
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_FSMC=y
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_SIZE=16384
+CONFIG_ATA=y
+# CONFIG_SATA_PMP is not set
+CONFIG_SATA_AHCI_PLATFORM=y
+CONFIG_PATA_ARASAN_CF=y
+CONFIG_NETDEVICES=y
+# CONFIG_NET_VENDOR_BROADCOM is not set
+# CONFIG_NET_VENDOR_CIRRUS is not set
+# CONFIG_NET_VENDOR_FARADAY is not set
+# CONFIG_NET_VENDOR_INTEL is not set
+# CONFIG_NET_VENDOR_MICREL is not set
+# CONFIG_NET_VENDOR_NATSEMI is not set
+# CONFIG_NET_VENDOR_SEEQ is not set
+# CONFIG_NET_VENDOR_SMSC is not set
+CONFIG_STMMAC_ETH=y
+# CONFIG_WLAN is not set
+CONFIG_INPUT_FF_MEMLESS=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+# CONFIG_KEYBOARD_ATKBD is not set
+CONFIG_KEYBOARD_SPEAR=y
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_LEGACY_PTYS is not set
+CONFIG_SERIAL_AMBA_PL011=y
+CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
+# CONFIG_HW_RANDOM is not set
+CONFIG_RAW_DRIVER=y
+CONFIG_MAX_RAW_DEVS=8192
+CONFIG_I2C=y
+CONFIG_I2C_DESIGNWARE_PLATFORM=y
+CONFIG_SPI=y
+CONFIG_SPI_PL022=y
+CONFIG_GPIO_SYSFS=y
+CONFIG_GPIO_PL061=y
+# CONFIG_HWMON is not set
+CONFIG_WATCHDOG=y
+CONFIG_MPCORE_WATCHDOG=y
+# CONFIG_HID_SUPPORT is not set
+CONFIG_USB=y
+# CONFIG_USB_DEVICE_CLASS is not set
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_OHCI_HCD=y
+CONFIG_MMC=y
+CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_SPEAR=y
+CONFIG_RTC_CLASS=y
+CONFIG_DMADEVICES=y
+CONFIG_DW_DMAC=y
+CONFIG_DMATEST=m
+CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS_XATTR=y
+CONFIG_EXT2_FS_SECURITY=y
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_SECURITY=y
+CONFIG_AUTOFS4_FS=m
+CONFIG_MSDOS_FS=m
+CONFIG_VFAT_FS=m
+CONFIG_FAT_DEFAULT_IOCHARSET="ascii"
+CONFIG_TMPFS=y
+CONFIG_JFFS2_FS=y
+CONFIG_NLS_DEFAULT="utf8"
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_ASCII=m
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_FS=y
+CONFIG_DEBUG_KERNEL=y
+CONFIG_DEBUG_SPINLOCK=y
+CONFIG_DEBUG_INFO=y

arch/arm/mach-exynos/Kconfig

@@ -61,6 +61,7 @@ config SOC_EXYNOS5250
 	bool "SAMSUNG EXYNOS5250"
 	default y
 	depends on ARCH_EXYNOS5
+	select SAMSUNG_DMADEV
 	help
 	  Enable EXYNOS5250 SoC support
 
@@ -70,7 +71,7 @@ config EXYNOS4_MCT
 	help
 	  Use MCT (Multi Core Timer) as kernel timers
 
-config EXYNOS4_DEV_DMA
+config EXYNOS_DEV_DMA
 	bool
 	help
 	  Compile in amba device definitions for DMA controller
@@ -80,6 +81,11 @@ config EXYNOS4_DEV_AHCI
 	help
 	  Compile in platform device definitions for AHCI
 
+config EXYNOS_DEV_DRM
+	bool
+	help
+	  Compile in platform device definitions for core DRM device
+
 config EXYNOS4_SETUP_FIMD0
 	bool
 	help
@@ -161,7 +167,7 @@ config EXYNOS4_SETUP_USB_PHY
 	help
 	  Common setup code for USB PHY controller
 
-config EXYNOS4_SETUP_SPI
+config EXYNOS_SETUP_SPI
 	bool
 	help
 	  Common setup code for SPI GPIO configurations.
@@ -224,7 +230,7 @@ config MACH_ARMLEX4210
 	select S3C_DEV_HSMMC2
 	select S3C_DEV_HSMMC3
 	select EXYNOS4_DEV_AHCI
-	select EXYNOS4_DEV_DMA
+	select EXYNOS_DEV_DMA
 	select EXYNOS4_SETUP_SDHCI
 	help
 	  Machine support for Samsung ARMLEX4210 based on EXYNOS4210
@@ -362,7 +368,7 @@ config MACH_SMDK4212
 	select SAMSUNG_DEV_KEYPAD
 	select SAMSUNG_DEV_PWM
 	select EXYNOS_DEV_SYSMMU
-	select EXYNOS4_DEV_DMA
+	select EXYNOS_DEV_DMA
 	select EXYNOS4_SETUP_I2C1
 	select EXYNOS4_SETUP_I2C3
 	select EXYNOS4_SETUP_I2C7

arch/arm/mach-exynos/Makefile

@@ -50,10 +50,11 @@ obj-$(CONFIG_MACH_EXYNOS5_DT)		+= mach-exynos5-dt.o
 obj-y					+= dev-uart.o
 obj-$(CONFIG_ARCH_EXYNOS4)		+= dev-audio.o
 obj-$(CONFIG_EXYNOS4_DEV_AHCI)		+= dev-ahci.o
-obj-$(CONFIG_EXYNOS_DEV_SYSMMU)		+= dev-sysmmu.o
 obj-$(CONFIG_EXYNOS4_DEV_DWMCI)		+= dev-dwmci.o
-obj-$(CONFIG_EXYNOS4_DEV_DMA)		+= dma.o
+obj-$(CONFIG_EXYNOS_DEV_DMA)		+= dma.o
 obj-$(CONFIG_EXYNOS4_DEV_USB_OHCI)	+= dev-ohci.o
+obj-$(CONFIG_EXYNOS_DEV_DRM)		+= dev-drm.o
+obj-$(CONFIG_EXYNOS_DEV_SYSMMU)		+= dev-sysmmu.o
 
 obj-$(CONFIG_ARCH_EXYNOS)		+= setup-i2c0.o
 obj-$(CONFIG_EXYNOS4_SETUP_FIMC)	+= setup-fimc.o
@@ -68,4 +69,4 @@ obj-$(CONFIG_EXYNOS4_SETUP_I2C7)	+= setup-i2c7.o
 obj-$(CONFIG_EXYNOS4_SETUP_KEYPAD)	+= setup-keypad.o
 obj-$(CONFIG_EXYNOS4_SETUP_SDHCI_GPIO)	+= setup-sdhci-gpio.o
 obj-$(CONFIG_EXYNOS4_SETUP_USB_PHY)	+= setup-usb-phy.o
-obj-$(CONFIG_EXYNOS4_SETUP_SPI)		+= setup-spi.o
+obj-$(CONFIG_EXYNOS_SETUP_SPI)		+= setup-spi.o

arch/arm/mach-exynos/Makefile.boot

    zreladdr-y	+= 0x40008000
 params_phys-y	:= 0x40000100
+
+dtb-$(CONFIG_MACH_EXYNOS4_DT) += exynos4210-origen.dtb exynos4210-smdkv310.dtb
+dtb-$(CONFIG_MACH_EXYNOS5_DT) += exynos5250-smdk5250.dtb

arch/arm/mach-exynos/clock-exynos4212.c

@@ -92,6 +92,16 @@ static struct clk init_clocks_off[] = {
 		.devname	= SYSMMU_CLOCK_DEVNAME(isp, 9),
 		.enable		= exynos4212_clk_ip_isp1_ctrl,
 		.ctrlbit	= (1 << 4),
+	}, {
+		.name		= "flite",
+		.devname	= "exynos-fimc-lite.0",
+		.enable		= exynos4212_clk_ip_isp0_ctrl,
+		.ctrlbit	= (1 << 4),
+	}, {
+		.name		= "flite",
+		.devname	= "exynos-fimc-lite.1",
+		.enable		= exynos4212_clk_ip_isp0_ctrl,
+		.ctrlbit	= (1 << 3),
 	}
 };
 

arch/arm/mach-exynos/clock-exynos5.c

@@ -165,11 +165,29 @@ static struct clksrc_clk exynos5_clk_sclk_apll = {
 	.reg_div = { .reg = EXYNOS5_CLKDIV_CPU0, .shift = 24, .size = 3 },
 };
 
+static struct clksrc_clk exynos5_clk_mout_bpll_fout = {
+	.clk	= {
+		.name		= "mout_bpll_fout",
+	},
+	.sources = &clk_src_bpll_fout,
+	.reg_src = { .reg = EXYNOS5_PLL_DIV2_SEL, .shift = 0, .size = 1 },
+};
+
+static struct clk *exynos5_clk_src_bpll_list[] = {
+	[0] = &clk_fin_bpll,
+	[1] = &exynos5_clk_mout_bpll_fout.clk,
+};
+
+static struct clksrc_sources exynos5_clk_src_bpll = {
+	.sources	= exynos5_clk_src_bpll_list,
+	.nr_sources	= ARRAY_SIZE(exynos5_clk_src_bpll_list),
+};
+
 static struct clksrc_clk exynos5_clk_mout_bpll = {
 	.clk	= {
 		.name		= "mout_bpll",
 	},
-	.sources = &clk_src_bpll,
+	.sources = &exynos5_clk_src_bpll,
 	.reg_src = { .reg = EXYNOS5_CLKSRC_CDREX, .shift = 0, .size = 1 },
 };
 
@@ -207,11 +225,29 @@ static struct clksrc_clk exynos5_clk_mout_epll = {
 	.reg_src = { .reg = EXYNOS5_CLKSRC_TOP2, .shift = 12, .size = 1 },
 };
 
+static struct clksrc_clk exynos5_clk_mout_mpll_fout = {
+	.clk	= {
+		.name		= "mout_mpll_fout",
+	},
+	.sources = &clk_src_mpll_fout,
+	.reg_src = { .reg = EXYNOS5_PLL_DIV2_SEL, .shift = 4, .size = 1 },
+};
+
+static struct clk *exynos5_clk_src_mpll_list[] = {
+	[0] = &clk_fin_mpll,
+	[1] = &exynos5_clk_mout_mpll_fout.clk,
+};
+
+static struct clksrc_sources exynos5_clk_src_mpll = {
+	.sources	= exynos5_clk_src_mpll_list,
+	.nr_sources	= ARRAY_SIZE(exynos5_clk_src_mpll_list),
+};
+
 struct clksrc_clk exynos5_clk_mout_mpll = {
 	.clk = {
 		.name		= "mout_mpll",
 	},
-	.sources = &clk_src_mpll,
+	.sources = &exynos5_clk_src_mpll,
 	.reg_src = { .reg = EXYNOS5_CLKSRC_CORE1, .shift = 8, .size = 1 },
 };
 
@@ -473,6 +509,11 @@ static struct clk exynos5_init_clocks_off[] = {
 		.parent		= &exynos5_clk_aclk_66.clk,
 		.enable		= exynos5_clk_ip_peris_ctrl,
 		.ctrlbit	= (1 << 20),
+	}, {
+		.name		= "watchdog",
+		.parent		= &exynos5_clk_aclk_66.clk,
+		.enable		= exynos5_clk_ip_peris_ctrl,
+		.ctrlbit	= (1 << 19),
 	}, {
 		.name		= "hsmmc",
 		.devname	= "exynos4-sdhci.0",
@@ -1031,10 +1072,12 @@ static struct clksrc_clk *exynos5_sysclks[] = {
 	&exynos5_clk_mout_apll,
 	&exynos5_clk_sclk_apll,
 	&exynos5_clk_mout_bpll,
+	&exynos5_clk_mout_bpll_fout,
 	&exynos5_clk_mout_bpll_user,
 	&exynos5_clk_mout_cpll,
 	&exynos5_clk_mout_epll,
 	&exynos5_clk_mout_mpll,
+	&exynos5_clk_mout_mpll_fout,
 	&exynos5_clk_mout_mpll_user,
 	&exynos5_clk_vpllsrc,
 	&exynos5_clk_sclk_vpll,
@@ -1098,7 +1141,9 @@ static struct clk *exynos5_clks[] __initdata = {
 	&exynos5_clk_sclk_hdmi27m,
 	&exynos5_clk_sclk_hdmiphy,
 	&clk_fout_bpll,
+	&clk_fout_bpll_div2,
 	&clk_fout_cpll,
+	&clk_fout_mpll_div2,
 	&exynos5_clk_armclk,
 };
 
@@ -1263,8 +1308,10 @@ void __init_or_cpufreq exynos5_setup_clocks(void)
 
 	clk_fout_apll.ops = &exynos5_fout_apll_ops;
 	clk_fout_bpll.rate = bpll;
+	clk_fout_bpll_div2.rate = bpll >> 1;
 	clk_fout_cpll.rate = cpll;
 	clk_fout_mpll.rate = mpll;
+	clk_fout_mpll_div2.rate = mpll >> 1;
 	clk_fout_epll.rate = epll;
 	clk_fout_vpll.rate = vpll;
 

arch/arm/mach-exynos/common.c

@@ -19,6 +19,9 @@
 #include <linux/serial_core.h>
 #include <linux/of.h>
 #include <linux/of_irq.h>
+#include <linux/export.h>
+#include <linux/irqdomain.h>
+#include <linux/of_address.h>
 
 #include <asm/proc-fns.h>
 #include <asm/exception.h>
@@ -265,12 +268,12 @@ static struct map_desc exynos5_iodesc[] __initdata = {
 	}, {
 		.virtual	= (unsigned long)S5P_VA_GIC_CPU,
 		.pfn		= __phys_to_pfn(EXYNOS5_PA_GIC_CPU),
-		.length		= SZ_64K,
+		.length		= SZ_8K,
 		.type		= MT_DEVICE,
 	}, {
 		.virtual	= (unsigned long)S5P_VA_GIC_DIST,
 		.pfn		= __phys_to_pfn(EXYNOS5_PA_GIC_DIST),
-		.length		= SZ_64K,
+		.length		= SZ_4K,
 		.type		= MT_DEVICE,
 	},
 };
@@ -399,6 +402,7 @@ struct combiner_chip_data {
 	void __iomem *base;
 };
 
+static struct irq_domain *combiner_irq_domain;
 static struct combiner_chip_data combiner_data[MAX_COMBINER_NR];
 
 static inline void __iomem *combiner_base(struct irq_data *data)
@@ -411,14 +415,14 @@ static inline void __iomem *combiner_base(struct irq_data *data)
 
 static void combiner_mask_irq(struct irq_data *data)
 {
-	u32 mask = 1 << (data->irq % 32);
+	u32 mask = 1 << (data->hwirq % 32);
 
 	__raw_writel(mask, combiner_base(data) + COMBINER_ENABLE_CLEAR);
 }
 
 static void combiner_unmask_irq(struct irq_data *data)
 {
-	u32 mask = 1 << (data->irq % 32);
+	u32 mask = 1 << (data->hwirq % 32);
 
 	__raw_writel(mask, combiner_base(data) + COMBINER_ENABLE_SET);
 }
@@ -474,49 +478,131 @@ static void __init combiner_cascade_irq(unsigned int combiner_nr, unsigned int i
 	irq_set_chained_handler(irq, combiner_handle_cascade_irq);
 }
 
-static void __init combiner_init(unsigned int combiner_nr, void __iomem *base,
-			  unsigned int irq_start)
+static void __init combiner_init_one(unsigned int combiner_nr,
+				     void __iomem *base)
 {
-	unsigned int i;
-	unsigned int max_nr;
-
-	if (soc_is_exynos5250())
-		max_nr = EXYNOS5_MAX_COMBINER_NR;
-	else
-		max_nr = EXYNOS4_MAX_COMBINER_NR;
-
-	if (combiner_nr >= max_nr)
-		BUG();
-
 	combiner_data[combiner_nr].base = base;
-	combiner_data[combiner_nr].irq_offset = irq_start;
+	combiner_data[combiner_nr].irq_offset = irq_find_mapping(
+		combiner_irq_domain, combiner_nr * MAX_IRQ_IN_COMBINER);
 	combiner_data[combiner_nr].irq_mask = 0xff << ((combiner_nr % 4) << 3);
 
 	/* Disable all interrupts */
-
 	__raw_writel(combiner_data[combiner_nr].irq_mask,
 		     base + COMBINER_ENABLE_CLEAR);
+}
 
-	/* Setup the Linux IRQ subsystem */
+#ifdef CONFIG_OF
+static int combiner_irq_domain_xlate(struct irq_domain *d,
+				     struct device_node *controller,
+				     const u32 *intspec, unsigned int intsize,
+				     unsigned long *out_hwirq,
+				     unsigned int *out_type)
+{
+	if (d->of_node != controller)
+		return -EINVAL;
 
-	for (i = irq_start; i < combiner_data[combiner_nr].irq_offset
-				+ MAX_IRQ_IN_COMBINER; i++) {
-		irq_set_chip_and_handler(i, &combiner_chip, handle_level_irq);
-		irq_set_chip_data(i, &combiner_data[combiner_nr]);
-		set_irq_flags(i, IRQF_VALID | IRQF_PROBE);
+	if (intsize < 2)
+		return -EINVAL;
+
+	*out_hwirq = intspec[0] * MAX_IRQ_IN_COMBINER + intspec[1];
+	*out_type = 0;
+
+	return 0;
+}
+#else
+static int combiner_irq_domain_xlate(struct irq_domain *d,
+				     struct device_node *controller,
+				     const u32 *intspec, unsigned int intsize,
+				     unsigned long *out_hwirq,
+				     unsigned int *out_type)
+{
+	return -EINVAL;
+}
+#endif
+
+static int combiner_irq_domain_map(struct irq_domain *d, unsigned int irq,
+				   irq_hw_number_t hw)
+{
+	irq_set_chip_and_handler(irq, &combiner_chip, handle_level_irq);
+	irq_set_chip_data(irq, &combiner_data[hw >> 3]);
+	set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
+
+	return 0;
+}
+
+static struct irq_domain_ops combiner_irq_domain_ops = {
+	.xlate	= combiner_irq_domain_xlate,
+	.map	= combiner_irq_domain_map,
+};
+
+void __init combiner_init(void __iomem *combiner_base, struct device_node *np)
+{
+	int i, irq, irq_base;
+	unsigned int max_nr, nr_irq;
+
+	if (np) {
+		if (of_property_read_u32(np, "samsung,combiner-nr", &max_nr)) {
+			pr_warning("%s: number of combiners not specified, "
+				"setting default as %d.\n",
+				__func__, EXYNOS4_MAX_COMBINER_NR);
+			max_nr = EXYNOS4_MAX_COMBINER_NR;
+		}
+	} else {
+		max_nr = soc_is_exynos5250() ? EXYNOS5_MAX_COMBINER_NR :
+						EXYNOS4_MAX_COMBINER_NR;
+	}
+	nr_irq = max_nr * MAX_IRQ_IN_COMBINER;
+
+	irq_base = irq_alloc_descs(COMBINER_IRQ(0, 0), 1, nr_irq, 0);
+	if (IS_ERR_VALUE(irq_base)) {
+		irq_base = COMBINER_IRQ(0, 0);
+		pr_warning("%s: irq desc alloc failed. Continuing with %d as linux irq base\n", __func__, irq_base);
+	}
+
+	combiner_irq_domain = irq_domain_add_legacy(np, nr_irq, irq_base, 0,
+				&combiner_irq_domain_ops, &combiner_data);
+	if (WARN_ON(!combiner_irq_domain)) {
+		pr_warning("%s: irq domain init failed\n", __func__);
+		return;
+	}
+
+	for (i = 0; i < max_nr; i++) {
+		combiner_init_one(i, combiner_base + (i >> 2) * 0x10);
+		irq = IRQ_SPI(i);
+#ifdef CONFIG_OF
+		if (np)
+			irq = irq_of_parse_and_map(np, i);
+#endif
+		combiner_cascade_irq(i, irq);
 	}
 }
 
 #ifdef CONFIG_OF
+int __init combiner_of_init(struct device_node *np, struct device_node *parent)
+{
+	void __iomem *combiner_base;
+
+	combiner_base = of_iomap(np, 0);
+	if (!combiner_base) {
+		pr_err("%s: failed to map combiner registers\n", __func__);
+		return -ENXIO;
+	}
+
+	combiner_init(combiner_base, np);
+
+	return 0;
+}
+
 static const struct of_device_id exynos4_dt_irq_match[] = {
 	{ .compatible = "arm,cortex-a9-gic", .data = gic_of_init, },
+	{ .compatible = "samsung,exynos4210-combiner",
+			.data = combiner_of_init, },
 	{},
 };
 #endif
 
 void __init exynos4_init_irq(void)
 {
-	int irq;
 	unsigned int gic_bank_offset;
 
 	gic_bank_offset = soc_is_exynos4412() ? 0x4000 : 0x8000;
@@ -528,12 +614,8 @@ void __init exynos4_init_irq(void)
 		of_irq_init(exynos4_dt_irq_match);
 #endif
 
-	for (irq = 0; irq < EXYNOS4_MAX_COMBINER_NR; irq++) {
-
-		combiner_init(irq, (void __iomem *)S5P_VA_COMBINER(irq),
-				COMBINER_IRQ(irq, 0));
-		combiner_cascade_irq(irq, IRQ_SPI(irq));
-	}
+	if (!of_have_populated_dt())
+		combiner_init(S5P_VA_COMBINER_BASE, NULL);
 
 	/*
 	 * The parameters of s5p_init_irq() are for VIC init.
@@ -545,18 +627,9 @@ void __init exynos4_init_irq(void)
 
 void __init exynos5_init_irq(void)
 {
-	int irq;
-
 #ifdef CONFIG_OF
 	of_irq_init(exynos4_dt_irq_match);
 #endif
-
-	for (irq = 0; irq < EXYNOS5_MAX_COMBINER_NR; irq++) {
-		combiner_init(irq, (void __iomem *)S5P_VA_COMBINER(irq),
-				COMBINER_IRQ(irq, 0));
-		combiner_cascade_irq(irq, IRQ_SPI(irq));
-	}
-
 	/*
 	 * The parameters of s5p_init_irq() are for VIC init.
 	 * Theses parameters should be NULL and 0 because EXYNOS4
@@ -565,30 +638,18 @@ void __init exynos5_init_irq(void)
 	s5p_init_irq(NULL, 0);
 }
 
-struct bus_type exynos4_subsys = {
-	.name		= "exynos4-core",
-	.dev_name	= "exynos4-core",
-};
-
-struct bus_type exynos5_subsys = {
-	.name		= "exynos5-core",
-	.dev_name	= "exynos5-core",
+struct bus_type exynos_subsys = {
+	.name		= "exynos-core",
+	.dev_name	= "exynos-core",
 };
 
 static struct device exynos4_dev = {
-	.bus	= &exynos4_subsys,
-};
-
-static struct device exynos5_dev = {
-	.bus	= &exynos5_subsys,
+	.bus	= &exynos_subsys,
 };
 
 static int __init exynos_core_init(void)
 {
-	if (soc_is_exynos5250())
-		return subsys_system_register(&exynos5_subsys, NULL);
-	else
-		return subsys_system_register(&exynos4_subsys, NULL);
+	return subsys_system_register(&exynos_subsys, NULL);
 }
 core_initcall(exynos_core_init);
 
@@ -675,9 +736,6 @@ static int __init exynos_init(void)
 {
 	printk(KERN_INFO "EXYNOS: Initializing architecture\n");
 
-	if (soc_is_exynos5250())
-		return device_register(&exynos5_dev);
-	else
 	return device_register(&exynos4_dev);
 }
 

arch/arm/mach-exynos/dev-drm.c

+/*
+ * linux/arch/arm/mach-exynos/dev-drm.c
+ *
+ * Copyright (c) 2012 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * EXYNOS - core DRM device
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/dma-mapping.h>
+#include <linux/platform_device.h>
+
+#include <plat/devs.h>
+
+static u64 exynos_drm_dma_mask = DMA_BIT_MASK(32);
+
+struct platform_device exynos_device_drm = {
+	.name	= "exynos-drm",
+	.dev	= {
+		.dma_mask		= &exynos_drm_dma_mask,
+		.coherent_dma_mask	= DMA_BIT_MASK(32),
+	}
+};

arch/arm/mach-exynos/dma.c

@@ -103,10 +103,45 @@ static u8 exynos4212_pdma0_peri[] = {
 	DMACH_MIPI_HSI5,
 };
 
-struct dma_pl330_platdata exynos4_pdma0_pdata;
+static u8 exynos5250_pdma0_peri[] = {
+	DMACH_PCM0_RX,
+	DMACH_PCM0_TX,
+	DMACH_PCM2_RX,
+	DMACH_PCM2_TX,
+	DMACH_SPI0_RX,
+	DMACH_SPI0_TX,
+	DMACH_SPI2_RX,
+	DMACH_SPI2_TX,
+	DMACH_I2S0S_TX,
+	DMACH_I2S0_RX,
+	DMACH_I2S0_TX,
+	DMACH_I2S2_RX,
+	DMACH_I2S2_TX,
+	DMACH_UART0_RX,
+	DMACH_UART0_TX,
+	DMACH_UART2_RX,
+	DMACH_UART2_TX,
+	DMACH_UART4_RX,
+	DMACH_UART4_TX,
+	DMACH_SLIMBUS0_RX,
+	DMACH_SLIMBUS0_TX,
+	DMACH_SLIMBUS2_RX,
+	DMACH_SLIMBUS2_TX,
+	DMACH_SLIMBUS4_RX,
+	DMACH_SLIMBUS4_TX,
+	DMACH_AC97_MICIN,
+	DMACH_AC97_PCMIN,
+	DMACH_AC97_PCMOUT,
+	DMACH_MIPI_HSI0,
+	DMACH_MIPI_HSI2,
+	DMACH_MIPI_HSI4,
+	DMACH_MIPI_HSI6,
+};
+
+static struct dma_pl330_platdata exynos_pdma0_pdata;
 
-static AMBA_AHB_DEVICE(exynos4_pdma0, "dma-pl330.0", 0x00041330,
-	EXYNOS4_PA_PDMA0, {EXYNOS4_IRQ_PDMA0}, &exynos4_pdma0_pdata);
+static AMBA_AHB_DEVICE(exynos_pdma0, "dma-pl330.0", 0x00041330,
+	EXYNOS4_PA_PDMA0, {EXYNOS4_IRQ_PDMA0}, &exynos_pdma0_pdata);
 
 static u8 exynos4210_pdma1_peri[] = {
 	DMACH_PCM0_RX,
@@ -169,10 +204,45 @@ static u8 exynos4212_pdma1_peri[] = {
 	DMACH_MIPI_HSI7,
 };
 
-static struct dma_pl330_platdata exynos4_pdma1_pdata;
+static u8 exynos5250_pdma1_peri[] = {
+	DMACH_PCM0_RX,
+	DMACH_PCM0_TX,
+	DMACH_PCM1_RX,
+	DMACH_PCM1_TX,
+	DMACH_SPI1_RX,
+	DMACH_SPI1_TX,
+	DMACH_PWM,
+	DMACH_SPDIF,
+	DMACH_I2S0S_TX,
+	DMACH_I2S0_RX,
+	DMACH_I2S0_TX,
+	DMACH_I2S1_RX,
+	DMACH_I2S1_TX,
+	DMACH_UART0_RX,
+	DMACH_UART0_TX,
+	DMACH_UART1_RX,
+	DMACH_UART1_TX,
+	DMACH_UART3_RX,
+	DMACH_UART3_TX,
+	DMACH_SLIMBUS1_RX,
+	DMACH_SLIMBUS1_TX,
+	DMACH_SLIMBUS3_RX,
+	DMACH_SLIMBUS3_TX,
+	DMACH_SLIMBUS5_RX,
+	DMACH_SLIMBUS5_TX,
+	DMACH_SLIMBUS0AUX_RX,
+	DMACH_SLIMBUS0AUX_TX,
+	DMACH_DISP1,
+	DMACH_MIPI_HSI1,
+	DMACH_MIPI_HSI3,
+	DMACH_MIPI_HSI5,
+	DMACH_MIPI_HSI7,
+};
 
-static AMBA_AHB_DEVICE(exynos4_pdma1,  "dma-pl330.1", 0x00041330,
-	EXYNOS4_PA_PDMA1, {EXYNOS4_IRQ_PDMA1}, &exynos4_pdma1_pdata);
+static struct dma_pl330_platdata exynos_pdma1_pdata;
+
+static AMBA_AHB_DEVICE(exynos_pdma1,  "dma-pl330.1", 0x00041330,
+	EXYNOS4_PA_PDMA1, {EXYNOS4_IRQ_PDMA1}, &exynos_pdma1_pdata);
 
 static u8 mdma_peri[] = {
 	DMACH_MTOM_0,
@@ -185,46 +255,63 @@ static u8 mdma_peri[] = {
 	DMACH_MTOM_7,
 };
 
-static struct dma_pl330_platdata exynos4_mdma1_pdata = {
+static struct dma_pl330_platdata exynos_mdma1_pdata = {
 	.nr_valid_peri = ARRAY_SIZE(mdma_peri),
 	.peri_id = mdma_peri,
 };
 
-static AMBA_AHB_DEVICE(exynos4_mdma1,  "dma-pl330.2", 0x00041330,
-	EXYNOS4_PA_MDMA1, {EXYNOS4_IRQ_MDMA1}, &exynos4_mdma1_pdata);
+static AMBA_AHB_DEVICE(exynos_mdma1,  "dma-pl330.2", 0x00041330,
+	EXYNOS4_PA_MDMA1, {EXYNOS4_IRQ_MDMA1}, &exynos_mdma1_pdata);
 
-static int __init exynos4_dma_init(void)
+static int __init exynos_dma_init(void)
 {
 	if (of_have_populated_dt())
 		return 0;
 
 	if (soc_is_exynos4210()) {
-		exynos4_pdma0_pdata.nr_valid_peri =
+		exynos_pdma0_pdata.nr_valid_peri =
 			ARRAY_SIZE(exynos4210_pdma0_peri);
-		exynos4_pdma0_pdata.peri_id = exynos4210_pdma0_peri;
-		exynos4_pdma1_pdata.nr_valid_peri =
+		exynos_pdma0_pdata.peri_id = exynos4210_pdma0_peri;
+		exynos_pdma1_pdata.nr_valid_peri =
 			ARRAY_SIZE(exynos4210_pdma1_peri);
-		exynos4_pdma1_pdata.peri_id = exynos4210_pdma1_peri;
+		exynos_pdma1_pdata.peri_id = exynos4210_pdma1_peri;
 	} else if (soc_is_exynos4212() || soc_is_exynos4412()) {
-		exynos4_pdma0_pdata.nr_valid_peri =
+		exynos_pdma0_pdata.nr_valid_peri =
 			ARRAY_SIZE(exynos4212_pdma0_peri);
-		exynos4_pdma0_pdata.peri_id = exynos4212_pdma0_peri;
-		exynos4_pdma1_pdata.nr_valid_peri =
+		exynos_pdma0_pdata.peri_id = exynos4212_pdma0_peri;
+		exynos_pdma1_pdata.nr_valid_peri =
 			ARRAY_SIZE(exynos4212_pdma1_peri);
-		exynos4_pdma1_pdata.peri_id = exynos4212_pdma1_peri;
+		exynos_pdma1_pdata.peri_id = exynos4212_pdma1_peri;
+	} else if (soc_is_exynos5250()) {
+		exynos_pdma0_pdata.nr_valid_peri =
+			ARRAY_SIZE(exynos5250_pdma0_peri);
+		exynos_pdma0_pdata.peri_id = exynos5250_pdma0_peri;
+		exynos_pdma1_pdata.nr_valid_peri =
+			ARRAY_SIZE(exynos5250_pdma1_peri);
+		exynos_pdma1_pdata.peri_id = exynos5250_pdma1_peri;
+
+		exynos_pdma0_device.res.start = EXYNOS5_PA_PDMA0;
+		exynos_pdma0_device.res.end = EXYNOS5_PA_PDMA0 + SZ_4K;
+		exynos_pdma0_device.irq[0] = EXYNOS5_IRQ_PDMA0;
+		exynos_pdma1_device.res.start = EXYNOS5_PA_PDMA1;
+		exynos_pdma1_device.res.end = EXYNOS5_PA_PDMA1 + SZ_4K;
+		exynos_pdma0_device.irq[0] = EXYNOS5_IRQ_PDMA1;
+		exynos_mdma1_device.res.start = EXYNOS5_PA_MDMA1;
+		exynos_mdma1_device.res.end = EXYNOS5_PA_MDMA1 + SZ_4K;
+		exynos_pdma0_device.irq[0] = EXYNOS5_IRQ_MDMA1;
 	}
 
-	dma_cap_set(DMA_SLAVE, exynos4_pdma0_pdata.cap_mask);
-	dma_cap_set(DMA_CYCLIC, exynos4_pdma0_pdata.cap_mask);
-	amba_device_register(&exynos4_pdma0_device, &iomem_resource);
+	dma_cap_set(DMA_SLAVE, exynos_pdma0_pdata.cap_mask);
+	dma_cap_set(DMA_CYCLIC, exynos_pdma0_pdata.cap_mask);
+	amba_device_register(&exynos_pdma0_device, &iomem_resource);
 
-	dma_cap_set(DMA_SLAVE, exynos4_pdma1_pdata.cap_mask);
-	dma_cap_set(DMA_CYCLIC, exynos4_pdma1_pdata.cap_mask);
-	amba_device_register(&exynos4_pdma1_device, &iomem_resource);
+	dma_cap_set(DMA_SLAVE, exynos_pdma1_pdata.cap_mask);
+	dma_cap_set(DMA_CYCLIC, exynos_pdma1_pdata.cap_mask);
+	amba_device_register(&exynos_pdma1_device, &iomem_resource);
 
-	dma_cap_set(DMA_MEMCPY, exynos4_mdma1_pdata.cap_mask);
-	amba_device_register(&exynos4_mdma1_device, &iomem_resource);
+	dma_cap_set(DMA_MEMCPY, exynos_mdma1_pdata.cap_mask);
+	amba_device_register(&exynos_mdma1_device, &iomem_resource);
 
 	return 0;
 }
-arch_initcall(exynos4_dma_init);
+arch_initcall(exynos_dma_init);

arch/arm/mach-exynos/include/mach/gpio.h

@@ -153,10 +153,11 @@ enum exynos4_gpio_number {
 #define EXYNOS5_GPIO_B2_NR	(4)
 #define EXYNOS5_GPIO_B3_NR	(4)
 #define EXYNOS5_GPIO_C0_NR	(7)
-#define EXYNOS5_GPIO_C1_NR	(7)
+#define EXYNOS5_GPIO_C1_NR	(4)
 #define EXYNOS5_GPIO_C2_NR	(7)
 #define EXYNOS5_GPIO_C3_NR	(7)
-#define EXYNOS5_GPIO_D0_NR	(8)
+#define EXYNOS5_GPIO_C4_NR	(7)
+#define EXYNOS5_GPIO_D0_NR	(4)
 #define EXYNOS5_GPIO_D1_NR	(8)
 #define EXYNOS5_GPIO_Y0_NR	(6)
 #define EXYNOS5_GPIO_Y1_NR	(4)
@@ -199,7 +200,8 @@ enum exynos5_gpio_number {
 	EXYNOS5_GPIO_C1_START		= EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_C0),
 	EXYNOS5_GPIO_C2_START		= EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_C1),
 	EXYNOS5_GPIO_C3_START		= EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_C2),
-	EXYNOS5_GPIO_D0_START		= EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_C3),
+	EXYNOS5_GPIO_C4_START		= EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_C3),
+	EXYNOS5_GPIO_D0_START		= EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_C4),
 	EXYNOS5_GPIO_D1_START		= EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_D0),
 	EXYNOS5_GPIO_Y0_START		= EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_D1),
 	EXYNOS5_GPIO_Y1_START		= EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_Y0),
@@ -242,6 +244,7 @@ enum exynos5_gpio_number {
 #define EXYNOS5_GPC1(_nr)	(EXYNOS5_GPIO_C1_START + (_nr))
 #define EXYNOS5_GPC2(_nr)	(EXYNOS5_GPIO_C2_START + (_nr))
 #define EXYNOS5_GPC3(_nr)	(EXYNOS5_GPIO_C3_START + (_nr))
+#define EXYNOS5_GPC4(_nr)	(EXYNOS5_GPIO_C4_START + (_nr))
 #define EXYNOS5_GPD0(_nr)	(EXYNOS5_GPIO_D0_START + (_nr))
 #define EXYNOS5_GPD1(_nr)	(EXYNOS5_GPIO_D1_START + (_nr))
 #define EXYNOS5_GPY0(_nr)	(EXYNOS5_GPIO_Y0_START + (_nr))

arch/arm/mach-exynos/include/mach/irqs.h

@@ -287,6 +287,7 @@
 #define EXYNOS5_IRQ_MIPICSI1		IRQ_SPI(80)
 #define EXYNOS5_IRQ_EFNFCON_DMA_ABORT	IRQ_SPI(81)
 #define EXYNOS5_IRQ_MIPIDSI0		IRQ_SPI(82)
+#define EXYNOS5_IRQ_WDT_IOP		IRQ_SPI(83)
 #define EXYNOS5_IRQ_ROTATOR		IRQ_SPI(84)
 #define EXYNOS5_IRQ_GSC0		IRQ_SPI(85)
 #define EXYNOS5_IRQ_GSC1		IRQ_SPI(86)
@@ -295,8 +296,8 @@
 #define EXYNOS5_IRQ_JPEG		IRQ_SPI(89)
 #define EXYNOS5_IRQ_EFNFCON_DMA		IRQ_SPI(90)
 #define EXYNOS5_IRQ_2D			IRQ_SPI(91)
-#define EXYNOS5_IRQ_SFMC0		IRQ_SPI(92)
-#define EXYNOS5_IRQ_SFMC1		IRQ_SPI(93)
+#define EXYNOS5_IRQ_EFNFCON_0		IRQ_SPI(92)
+#define EXYNOS5_IRQ_EFNFCON_1		IRQ_SPI(93)
 #define EXYNOS5_IRQ_MIXER		IRQ_SPI(94)
 #define EXYNOS5_IRQ_HDMI		IRQ_SPI(95)
 #define EXYNOS5_IRQ_MFC			IRQ_SPI(96)
@@ -310,7 +311,7 @@
 #define EXYNOS5_IRQ_PCM2		IRQ_SPI(104)
 #define EXYNOS5_IRQ_SPDIF		IRQ_SPI(105)
 #define EXYNOS5_IRQ_ADC0		IRQ_SPI(106)
-
+#define EXYNOS5_IRQ_ADC1		IRQ_SPI(107)
 #define EXYNOS5_IRQ_SATA_PHY		IRQ_SPI(108)
 #define EXYNOS5_IRQ_SATA_PMEMREQ	IRQ_SPI(109)
 #define EXYNOS5_IRQ_CAM_C		IRQ_SPI(110)
@@ -319,8 +320,9 @@
 #define EXYNOS5_IRQ_DP1_INTP1		IRQ_SPI(113)
 #define EXYNOS5_IRQ_CEC			IRQ_SPI(114)
 #define EXYNOS5_IRQ_SATA		IRQ_SPI(115)
-#define EXYNOS5_IRQ_NFCON		IRQ_SPI(116)
 
+#define EXYNOS5_IRQ_MCT_L0		IRQ_SPI(120)
+#define EXYNOS5_IRQ_MCT_L1		IRQ_SPI(121)
 #define EXYNOS5_IRQ_MMC44		IRQ_SPI(123)
 #define EXYNOS5_IRQ_MDMA1		IRQ_SPI(124)
 #define EXYNOS5_IRQ_FIMC_LITE0		IRQ_SPI(125)
@@ -328,7 +330,6 @@
 #define EXYNOS5_IRQ_RP_TIMER		IRQ_SPI(127)
 
 #define EXYNOS5_IRQ_PMU			COMBINER_IRQ(1, 2)
-#define EXYNOS5_IRQ_PMU_CPU1		COMBINER_IRQ(1, 6)
 
 #define EXYNOS5_IRQ_SYSMMU_GSC0_0	COMBINER_IRQ(2, 0)
 #define EXYNOS5_IRQ_SYSMMU_GSC0_1	COMBINER_IRQ(2, 1)
@@ -339,6 +340,8 @@
 #define EXYNOS5_IRQ_SYSMMU_GSC3_0	COMBINER_IRQ(2, 6)
 #define EXYNOS5_IRQ_SYSMMU_GSC3_1	COMBINER_IRQ(2, 7)
 
+#define EXYNOS5_IRQ_SYSMMU_LITE2_0	COMBINER_IRQ(3, 0)
+#define EXYNOS5_IRQ_SYSMMU_LITE2_1	COMBINER_IRQ(3, 1)
 #define EXYNOS5_IRQ_SYSMMU_FIMD1_0	COMBINER_IRQ(3, 2)
 #define EXYNOS5_IRQ_SYSMMU_FIMD1_1	COMBINER_IRQ(3, 3)
 #define EXYNOS5_IRQ_SYSMMU_LITE0_0	COMBINER_IRQ(3, 4)
@@ -362,8 +365,8 @@
 
 #define EXYNOS5_IRQ_SYSMMU_ARM_0	COMBINER_IRQ(6, 0)
 #define EXYNOS5_IRQ_SYSMMU_ARM_1	COMBINER_IRQ(6, 1)
-#define EXYNOS5_IRQ_SYSMMU_MFC_L_0	COMBINER_IRQ(6, 2)
-#define EXYNOS5_IRQ_SYSMMU_MFC_L_1	COMBINER_IRQ(6, 3)
+#define EXYNOS5_IRQ_SYSMMU_MFC_R_0	COMBINER_IRQ(6, 2)
+#define EXYNOS5_IRQ_SYSMMU_MFC_R_1	COMBINER_IRQ(6, 3)
 #define EXYNOS5_IRQ_SYSMMU_RTIC_0	COMBINER_IRQ(6, 4)
 #define EXYNOS5_IRQ_SYSMMU_RTIC_1	COMBINER_IRQ(6, 5)
 #define EXYNOS5_IRQ_SYSMMU_SSS_0	COMBINER_IRQ(6, 6)
@@ -375,11 +378,9 @@
 #define EXYNOS5_IRQ_SYSMMU_MDMA1_1	COMBINER_IRQ(7, 3)
 #define EXYNOS5_IRQ_SYSMMU_TV_0		COMBINER_IRQ(7, 4)
 #define EXYNOS5_IRQ_SYSMMU_TV_1		COMBINER_IRQ(7, 5)
-#define EXYNOS5_IRQ_SYSMMU_GPSX_0	COMBINER_IRQ(7, 6)
-#define EXYNOS5_IRQ_SYSMMU_GPSX_1	COMBINER_IRQ(7, 7)
 
-#define EXYNOS5_IRQ_SYSMMU_MFC_R_0	COMBINER_IRQ(8, 5)
-#define EXYNOS5_IRQ_SYSMMU_MFC_R_1	COMBINER_IRQ(8, 6)
+#define EXYNOS5_IRQ_SYSMMU_MFC_L_0	COMBINER_IRQ(8, 5)
+#define EXYNOS5_IRQ_SYSMMU_MFC_L_1	COMBINER_IRQ(8, 6)
 
 #define EXYNOS5_IRQ_SYSMMU_DIS1_0	COMBINER_IRQ(9, 4)
 #define EXYNOS5_IRQ_SYSMMU_DIS1_1	COMBINER_IRQ(9, 5)
@@ -395,17 +396,24 @@
 #define EXYNOS5_IRQ_SYSMMU_DRC_0	COMBINER_IRQ(11, 6)
 #define EXYNOS5_IRQ_SYSMMU_DRC_1	COMBINER_IRQ(11, 7)
 
+#define EXYNOS5_IRQ_MDMA1_ABORT		COMBINER_IRQ(13, 1)
+
+#define EXYNOS5_IRQ_MDMA0_ABORT		COMBINER_IRQ(15, 3)
+
 #define EXYNOS5_IRQ_FIMD1_FIFO		COMBINER_IRQ(18, 4)
 #define EXYNOS5_IRQ_FIMD1_VSYNC		COMBINER_IRQ(18, 5)
 #define EXYNOS5_IRQ_FIMD1_SYSTEM	COMBINER_IRQ(18, 6)
 
+#define EXYNOS5_IRQ_ARMIOP_GIC		COMBINER_IRQ(19, 0)
+#define EXYNOS5_IRQ_ARMISP_GIC		COMBINER_IRQ(19, 1)
+#define EXYNOS5_IRQ_IOP_GIC		COMBINER_IRQ(19, 3)
+#define EXYNOS5_IRQ_ISP_GIC		COMBINER_IRQ(19, 4)
+
+#define EXYNOS5_IRQ_PMU_CPU1		COMBINER_IRQ(22, 4)
+
 #define EXYNOS5_IRQ_EINT0		COMBINER_IRQ(23, 0)
-#define EXYNOS5_IRQ_MCT_L0		COMBINER_IRQ(23, 1)
-#define EXYNOS5_IRQ_MCT_L1		COMBINER_IRQ(23, 2)
 #define EXYNOS5_IRQ_MCT_G0		COMBINER_IRQ(23, 3)
 #define EXYNOS5_IRQ_MCT_G1		COMBINER_IRQ(23, 4)
-#define EXYNOS5_IRQ_MCT_G2		COMBINER_IRQ(23, 5)
-#define EXYNOS5_IRQ_MCT_G3		COMBINER_IRQ(23, 6)
 
 #define EXYNOS5_IRQ_EINT1		COMBINER_IRQ(24, 0)
 #define EXYNOS5_IRQ_SYSMMU_LITE1_0	COMBINER_IRQ(24, 1)
@@ -436,7 +444,7 @@
 
 #define EXYNOS5_MAX_COMBINER_NR		32
 
-#define EXYNOS5_IRQ_GPIO1_NR_GROUPS	13
+#define EXYNOS5_IRQ_GPIO1_NR_GROUPS	14
 #define EXYNOS5_IRQ_GPIO2_NR_GROUPS	9
 #define EXYNOS5_IRQ_GPIO3_NR_GROUPS	5
 #define EXYNOS5_IRQ_GPIO4_NR_GROUPS	1

arch/arm/mach-exynos/include/mach/map.h

@@ -34,6 +34,9 @@
 
 #define EXYNOS4_PA_JPEG			0x11840000
 
+/* x = 0...1 */
+#define EXYNOS4_PA_FIMC_LITE(x)		(0x12390000 + ((x) * 0x10000))
+
 #define EXYNOS4_PA_G2D			0x12800000
 
 #define EXYNOS4_PA_I2S0			0x03830000
@@ -78,8 +81,8 @@
 
 #define EXYNOS4_PA_GIC_CPU		0x10480000
 #define EXYNOS4_PA_GIC_DIST		0x10490000
-#define EXYNOS5_PA_GIC_CPU		0x10480000
-#define EXYNOS5_PA_GIC_DIST		0x10490000
+#define EXYNOS5_PA_GIC_CPU		0x10482000
+#define EXYNOS5_PA_GIC_DIST		0x10481000
 
 #define EXYNOS4_PA_COREPERI		0x10500000
 #define EXYNOS4_PA_TWD			0x10500600

arch/arm/mach-exynos/include/mach/regs-clock.h

@@ -322,6 +322,8 @@
 #define EXYNOS5_CLKSRC_CDREX			EXYNOS_CLKREG(0x20200)
 #define EXYNOS5_CLKDIV_CDREX			EXYNOS_CLKREG(0x20500)
 
+#define EXYNOS5_PLL_DIV2_SEL			EXYNOS_CLKREG(0x20A24)
+
 #define EXYNOS5_EPLL_LOCK			EXYNOS_CLKREG(0x10030)
 
 #define EXYNOS5_EPLLCON0_LOCKED_SHIFT		(29)

arch/arm/mach-exynos/include/mach/regs-pmu.h

@@ -180,7 +180,7 @@
 
 #define S5P_PMU_LCD1_CONF		S5P_PMUREG(0x3CA0)
 
-/* Only for EXYNOS4212 */
+/* Only for EXYNOS4x12 */
 #define S5P_ISP_ARM_LOWPWR			S5P_PMUREG(0x1050)
 #define S5P_DIS_IRQ_ISP_ARM_LOCAL_LOWPWR	S5P_PMUREG(0x1054)
 #define S5P_DIS_IRQ_ISP_ARM_CENTRAL_LOWPWR	S5P_PMUREG(0x1058)
@@ -221,4 +221,12 @@
 #define S5P_SECSS_MEM_OPTION			S5P_PMUREG(0x2EC8)
 #define S5P_ROTATOR_MEM_OPTION			S5P_PMUREG(0x2F48)
 
+/* Only for EXYNOS4412 */
+#define S5P_ARM_CORE2_LOWPWR			S5P_PMUREG(0x1020)
+#define S5P_DIS_IRQ_CORE2			S5P_PMUREG(0x1024)
+#define S5P_DIS_IRQ_CENTRAL2			S5P_PMUREG(0x1028)
+#define S5P_ARM_CORE3_LOWPWR			S5P_PMUREG(0x1030)
+#define S5P_DIS_IRQ_CORE3			S5P_PMUREG(0x1034)
+#define S5P_DIS_IRQ_CENTRAL3			S5P_PMUREG(0x1038)
+
 #endif /* __ASM_ARCH_REGS_PMU_H */

arch/arm/mach-exynos/include/mach/spi-clocks.h

@@ -11,6 +11,6 @@
 #define __ASM_ARCH_SPI_CLKS_H __FILE__
 
 /* Must source from SCLK_SPI */
-#define EXYNOS4_SPI_SRCCLK_SCLK		0
+#define EXYNOS_SPI_SRCCLK_SCLK		0
 
 #endif /* __ASM_ARCH_SPI_CLKS_H */

arch/arm/mach-exynos/mach-exynos5-dt.c

@@ -43,6 +43,10 @@ static const struct of_dev_auxdata exynos5250_auxdata_lookup[] __initconst = {
 				"exynos4210-uart.2", NULL),
 	OF_DEV_AUXDATA("samsung,exynos4210-uart", EXYNOS5_PA_UART3,
 				"exynos4210-uart.3", NULL),
+	OF_DEV_AUXDATA("samsung,s3c2440-i2c", EXYNOS5_PA_IIC(0),
+				"s3c2440-i2c.0", NULL),
+	OF_DEV_AUXDATA("samsung,s3c2440-i2c", EXYNOS5_PA_IIC(1),
+				"s3c2440-i2c.1", NULL),
 	OF_DEV_AUXDATA("arm,pl330", EXYNOS5_PA_PDMA0, "dma-pl330.0", NULL),
 	OF_DEV_AUXDATA("arm,pl330", EXYNOS5_PA_PDMA1, "dma-pl330.1", NULL),
 	OF_DEV_AUXDATA("arm,pl330", EXYNOS5_PA_MDMA1, "dma-pl330.2", NULL),

arch/arm/mach-exynos/mct.c

@@ -388,6 +388,7 @@ static int __cpuinit exynos4_local_timer_setup(struct clock_event_device *evt)
 {
 	struct mct_clock_event_device *mevt;
 	unsigned int cpu = smp_processor_id();
+	int mct_lx_irq;
 
 	mevt = this_cpu_ptr(&percpu_mct_tick);
 	mevt->evt = evt;
@@ -414,14 +415,18 @@ static int __cpuinit exynos4_local_timer_setup(struct clock_event_device *evt)
 
 	if (mct_int_type == MCT_INT_SPI) {
 		if (cpu == 0) {
+			mct_lx_irq = soc_is_exynos4210() ? EXYNOS4_IRQ_MCT_L0 :
+						EXYNOS5_IRQ_MCT_L0;
 			mct_tick0_event_irq.dev_id = mevt;
-			evt->irq = EXYNOS4_IRQ_MCT_L0;
-			setup_irq(EXYNOS4_IRQ_MCT_L0, &mct_tick0_event_irq);
+			evt->irq = mct_lx_irq;
+			setup_irq(mct_lx_irq, &mct_tick0_event_irq);
 		} else {
+			mct_lx_irq = soc_is_exynos4210() ? EXYNOS4_IRQ_MCT_L1 :
+						EXYNOS5_IRQ_MCT_L1;
 			mct_tick1_event_irq.dev_id = mevt;
-			evt->irq = EXYNOS4_IRQ_MCT_L1;
-			setup_irq(EXYNOS4_IRQ_MCT_L1, &mct_tick1_event_irq);
-			irq_set_affinity(EXYNOS4_IRQ_MCT_L1, cpumask_of(1));
+			evt->irq = mct_lx_irq;
+			setup_irq(mct_lx_irq, &mct_tick1_event_irq);
+			irq_set_affinity(mct_lx_irq, cpumask_of(1));
 		}
 	} else {
 		enable_percpu_irq(EXYNOS_IRQ_MCT_LOCALTIMER, 0);
@@ -473,7 +478,7 @@ static void __init exynos4_timer_resources(void)
 
 static void __init exynos4_timer_init(void)
 {
-	if (soc_is_exynos4210())
+	if ((soc_is_exynos4210()) || (soc_is_exynos5250()))
 		mct_int_type = MCT_INT_SPI;
 	else
 		mct_int_type = MCT_INT_PPI;

arch/arm/mach-exynos/pm.c

@@ -275,7 +275,7 @@ static void exynos4_restore_pll(void)
 
 static struct subsys_interface exynos4_pm_interface = {
 	.name		= "exynos4_pm",
-	.subsys		= &exynos4_subsys,
+	.subsys		= &exynos_subsys,
 	.add_dev	= exynos4_pm_add,
 };
 
@@ -313,7 +313,7 @@ static int exynos4_pm_suspend(void)
 	tmp &= ~S5P_CENTRAL_LOWPWR_CFG;
 	__raw_writel(tmp, S5P_CENTRAL_SEQ_CONFIGURATION);
 
-	if (soc_is_exynos4212()) {
+	if (soc_is_exynos4212() || soc_is_exynos4412()) {
 		tmp = __raw_readl(S5P_CENTRAL_SEQ_OPTION);
 		tmp &= ~(S5P_USE_STANDBYWFI_ISP_ARM |
 			 S5P_USE_STANDBYWFE_ISP_ARM);

arch/arm/mach-exynos/pmu.c

@@ -94,7 +94,7 @@ static struct exynos4_pmu_conf exynos4210_pmu_config[] = {
 	{ PMU_TABLE_END,},
 };
 
-static struct exynos4_pmu_conf exynos4212_pmu_config[] = {
+static struct exynos4_pmu_conf exynos4x12_pmu_config[] = {
 	{ S5P_ARM_CORE0_LOWPWR,			{ 0x0, 0x0, 0x2 } },
 	{ S5P_DIS_IRQ_CORE0,			{ 0x0, 0x0, 0x0 } },
 	{ S5P_DIS_IRQ_CENTRAL0,			{ 0x0, 0x0, 0x0 } },
@@ -202,6 +202,16 @@ static struct exynos4_pmu_conf exynos4212_pmu_config[] = {
 	{ PMU_TABLE_END,},
 };
 
+static struct exynos4_pmu_conf exynos4412_pmu_config[] = {
+	{ S5P_ARM_CORE2_LOWPWR,			{ 0x0, 0x0, 0x2 } },
+	{ S5P_DIS_IRQ_CORE2,			{ 0x0, 0x0, 0x0 } },
+	{ S5P_DIS_IRQ_CENTRAL2,			{ 0x0, 0x0, 0x0 } },
+	{ S5P_ARM_CORE3_LOWPWR,			{ 0x0, 0x0, 0x2 } },
+	{ S5P_DIS_IRQ_CORE3,			{ 0x0, 0x0, 0x0 } },
+	{ S5P_DIS_IRQ_CENTRAL3,			{ 0x0, 0x0, 0x0 } },
+	{ PMU_TABLE_END,},
+};
+
 void exynos4_sys_powerdown_conf(enum sys_powerdown mode)
 {
 	unsigned int i;
@@ -209,6 +219,12 @@ void exynos4_sys_powerdown_conf(enum sys_powerdown mode)
 	for (i = 0; (exynos4_pmu_config[i].reg != PMU_TABLE_END) ; i++)
 		__raw_writel(exynos4_pmu_config[i].val[mode],
 				exynos4_pmu_config[i].reg);
+
+	if (soc_is_exynos4412()) {
+		for (i = 0; exynos4412_pmu_config[i].reg != PMU_TABLE_END ; i++)
+			__raw_writel(exynos4412_pmu_config[i].val[mode],
+				exynos4412_pmu_config[i].reg);
+	}
 }
 
 static int __init exynos4_pmu_init(void)
@@ -218,9 +234,9 @@ static int __init exynos4_pmu_init(void)
 	if (soc_is_exynos4210()) {
 		exynos4_pmu_config = exynos4210_pmu_config;
 		pr_info("EXYNOS4210 PMU Initialize\n");
-	} else if (soc_is_exynos4212()) {
-		exynos4_pmu_config = exynos4212_pmu_config;
-		pr_info("EXYNOS4212 PMU Initialize\n");
+	} else if (soc_is_exynos4212() || soc_is_exynos4412()) {
+		exynos4_pmu_config = exynos4x12_pmu_config;
+		pr_info("EXYNOS4x12 PMU Initialize\n");
 	} else {
 		pr_info("EXYNOS4: PMU not supported\n");
 	}

arch/arm/mach-s3c24xx/Kconfig

@@ -518,6 +518,11 @@ config S3C2443_DMA
 	help
 	  Internal config node for S3C2443 DMA support
 
+config S3C2443_SETUP_SPI
+	bool
+	help
+	  Common setup code for SPI GPIO configurations
+
 endif	# CPU_S3C2443 || CPU_S3C2416
 
 if CPU_S3C2443

arch/arm/mach-s3c24xx/Makefile

@@ -97,5 +97,6 @@ obj-$(CONFIG_MACH_OSIRIS_DVS)		+= mach-osiris-dvs.o
 # device setup
 
 obj-$(CONFIG_S3C2416_SETUP_SDHCI_GPIO)	+= setup-sdhci-gpio.o
+obj-$(CONFIG_S3C2443_SETUP_SPI)		+= setup-spi.o
 obj-$(CONFIG_ARCH_S3C24XX)		+= setup-i2c.o
 obj-$(CONFIG_S3C24XX_SETUP_TS)		+= setup-ts.o

arch/arm/mach-s3c24xx/clock-s3c2416.c

@@ -144,6 +144,7 @@ static struct clk_lookup s3c2416_clk_lookup[] = {
 	CLKDEV_INIT("s3c-sdhci.0", "mmc_busclk.0", &hsmmc0_clk),
 	CLKDEV_INIT("s3c-sdhci.0", "mmc_busclk.2", &hsmmc_mux0.clk),
 	CLKDEV_INIT("s3c-sdhci.1", "mmc_busclk.2", &hsmmc_mux1.clk),
+	CLKDEV_INIT("s3c64xx-spi.0", "spi_busclk2", &hsspi_mux.clk),
 };
 
 void __init s3c2416_init_clocks(int xtal)

arch/arm/mach-s3c24xx/clock-s3c2443.c

@@ -179,6 +179,11 @@ static struct clk *clks[] __initdata = {
 	&clk_hsmmc,
 };
 
+static struct clk_lookup s3c2443_clk_lookup[] = {
+	CLKDEV_INIT("s3c-sdhci.1", "mmc_busclk.2", &clk_hsmmc),
+	CLKDEV_INIT("s3c64xx-spi.0", "spi_busclk2", &clk_hsspi.clk),
+};
+
 void __init s3c2443_init_clocks(int xtal)
 {
 	unsigned long epllcon = __raw_readl(S3C2443_EPLLCON);
@@ -210,6 +215,7 @@ void __init s3c2443_init_clocks(int xtal)
 
 	s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
 	s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
+	clkdev_add_table(s3c2443_clk_lookup, ARRAY_SIZE(s3c2443_clk_lookup));
 
 	s3c_pwmclk_init();
 }

arch/arm/mach-s3c24xx/common-s3c2443.c

@@ -423,11 +423,6 @@ static struct clk init_clocks_off[] = {
 		.parent		= &clk_p,
 		.enable		= s3c2443_clkcon_enable_p,
 		.ctrlbit	= S3C2443_PCLKCON_IIS,
-	}, {
-		.name		= "hsspi",
-		.parent		= &clk_p,
-		.enable		= s3c2443_clkcon_enable_p,
-		.ctrlbit	= S3C2443_PCLKCON_HSSPI,
 	}, {
 		.name		= "adc",
 		.parent		= &clk_p,
@@ -562,6 +557,14 @@ static struct clk hsmmc1_clk = {
 	.ctrlbit	= S3C2443_HCLKCON_HSMMC,
 };
 
+static struct clk hsspi_clk = {
+	.name		= "spi",
+	.devname	= "s3c64xx-spi.0",
+	.parent		= &clk_p,
+	.enable		= s3c2443_clkcon_enable_p,
+	.ctrlbit	= S3C2443_PCLKCON_HSSPI,
+};
+
 /* EPLLCON compatible enough to get on/off information */
 
 void __init_or_cpufreq s3c2443_common_setup_clocks(pll_fn get_mpll)
@@ -612,6 +615,7 @@ static struct clk *clks[] __initdata = {
 	&clk_usb_bus,
 	&clk_armdiv,
 	&hsmmc1_clk,
+	&hsspi_clk,
 };
 
 static struct clksrc_clk *clksrcs[] __initdata = {
@@ -629,6 +633,7 @@ static struct clk_lookup s3c2443_clk_lookup[] = {
 	CLKDEV_INIT(NULL, "clk_uart_baud2", &clk_p),
 	CLKDEV_INIT(NULL, "clk_uart_baud3", &clk_esys_uart.clk),
 	CLKDEV_INIT("s3c-sdhci.1", "mmc_busclk.0", &hsmmc1_clk),
+	CLKDEV_INIT("s3c64xx-spi.0", "spi_busclk0", &hsspi_clk),
 };
 
 void __init s3c2443_common_init_clocks(int xtal, pll_fn get_mpll,

arch/arm/mach-s3c24xx/dma-s3c2443.c

@@ -55,12 +55,20 @@ static struct s3c24xx_dma_map __initdata s3c2443_dma_mappings[] = {
 		.name		= "sdi",
 		.channels	= MAP(S3C2443_DMAREQSEL_SDI),
 	},
-	[DMACH_SPI0] = {
-		.name		= "spi0",
+	[DMACH_SPI0_RX] = {
+		.name		= "spi0-rx",
+		.channels	= MAP(S3C2443_DMAREQSEL_SPI0RX),
+	},
+	[DMACH_SPI0_TX] = {
+		.name		= "spi0-tx",
 		.channels	= MAP(S3C2443_DMAREQSEL_SPI0TX),
 	},
-	[DMACH_SPI1] = { /* only on S3C2443/S3C2450 */
-		.name		= "spi1",
+	[DMACH_SPI1_RX] = { /* only on S3C2443/S3C2450 */
+		.name		= "spi1-rx",
+		.channels	= MAP(S3C2443_DMAREQSEL_SPI1RX),
+	},
+	[DMACH_SPI1_TX] = { /* only on S3C2443/S3C2450 */
+		.name		= "spi1-tx",
 		.channels	= MAP(S3C2443_DMAREQSEL_SPI1TX),
 	},
 	[DMACH_UART0] = {

arch/arm/mach-s3c24xx/include/mach/dma.h

@@ -47,6 +47,10 @@ enum dma_ch {
 	DMACH_UART2_SRC2,
 	DMACH_UART3,		/* s3c2443 has extra uart */
 	DMACH_UART3_SRC2,
+	DMACH_SPI0_TX,		/* s3c2443/2416/2450 hsspi0 */
+	DMACH_SPI0_RX,		/* s3c2443/2416/2450 hsspi0 */
+	DMACH_SPI1_TX,		/* s3c2443/2450 hsspi1 */
+	DMACH_SPI1_RX,		/* s3c2443/2450 hsspi1 */
 	DMACH_MAX,		/* the end entry */
 };
 

arch/arm/mach-s3c24xx/include/mach/map.h

@@ -98,6 +98,8 @@
 
 /* SPI */
 #define S3C2410_PA_SPI	   (0x59000000)
+#define S3C2443_PA_SPI0		(0x52000000)
+#define S3C2443_PA_SPI1		S3C2410_PA_SPI
 
 /* SDI */
 #define S3C2410_PA_SDI	   (0x5A000000)
@@ -162,4 +164,7 @@
 #define S3C_PA_WDT	    S3C2410_PA_WATCHDOG
 #define S3C_PA_NAND	    S3C24XX_PA_NAND
 
+#define S3C_PA_SPI0		S3C2443_PA_SPI0
+#define S3C_PA_SPI1		S3C2443_PA_SPI1
+
 #endif /* __ASM_ARCH_MAP_H */

arch/arm/mach-s3c24xx/setup-spi.c

+/*
+ * HS-SPI device setup for S3C2443/S3C2416
+ *
+ * Copyright (C) 2011 Samsung Electronics Ltd.
+ *		http://www.samsung.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/gpio.h>
+#include <linux/platform_device.h>
+
+#include <plat/gpio-cfg.h>
+#include <plat/s3c64xx-spi.h>
+
+#include <mach/hardware.h>
+#include <mach/regs-gpio.h>
+
+#ifdef CONFIG_S3C64XX_DEV_SPI0
+struct s3c64xx_spi_info s3c64xx_spi0_pdata __initdata = {
+	.fifo_lvl_mask	= 0x7f,
+	.rx_lvl_offset	= 13,
+	.tx_st_done	= 21,
+	.high_speed	= 1,
+};
+
+int s3c64xx_spi0_cfg_gpio(struct platform_device *pdev)
+{
+	/* enable hsspi bit in misccr */
+	s3c2410_modify_misccr(S3C2416_MISCCR_HSSPI_EN2, 1);
+
+	s3c_gpio_cfgall_range(S3C2410_GPE(11), 3,
+			      S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP);
+
+	return 0;
+}
+#endif

arch/arm/mach-spear13xx/Kconfig

+#
+# SPEAr13XX Machine configuration file
+#
+
+if ARCH_SPEAR13XX
+
+menu "SPEAr13xx Implementations"
+config MACH_SPEAR1310
+	bool "SPEAr1310 Machine support with Device Tree"
+	select PINCTRL_SPEAR1310
+	help
+	  Supports ST SPEAr1310 machine configured via the device-tree
+
+config MACH_SPEAR1340
+	bool "SPEAr1340 Machine support with Device Tree"
+	select PINCTRL_SPEAR1340
+	help
+	  Supports ST SPEAr1340 machine configured via the device-tree
+endmenu
+endif #ARCH_SPEAR13XX

arch/arm/mach-spear13xx/Makefile

+#
+# Makefile for SPEAr13XX machine series
+#
+
+obj-$(CONFIG_SMP)		+= headsmp.o platsmp.o
+obj-$(CONFIG_HOTPLUG_CPU)	+= hotplug.o
+
+obj-$(CONFIG_ARCH_SPEAR13XX)	+= spear13xx.o
+obj-$(CONFIG_MACH_SPEAR1310)	+= spear1310.o
+obj-$(CONFIG_MACH_SPEAR1340)	+= spear1340.o

arch/arm/mach-spear13xx/Makefile.boot

+zreladdr-y	+= 0x00008000
+params_phys-y	:= 0x00000100
+initrd_phys-y	:= 0x00800000
+
+dtb-$(CONFIG_MACH_SPEAR1310)	+= spear1310-evb.dtb
+dtb-$(CONFIG_MACH_SPEAR1340)	+= spear1340-evb.dtb

arch/arm/mach-spear13xx/headsmp.S

+/*
+ * arch/arm/mach-spear13XX/headsmp.S
+ *
+ * Picked from realview
+ * Copyright (c) 2012 ST Microelectronics Limited
+ * Shiraz Hashim <shiraz.hashim@st.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/linkage.h>
+#include <linux/init.h>
+
+	__INIT
+
+/*
+ * spear13xx specific entry point for secondary CPUs. This provides
+ * a "holding pen" into which all secondary cores are held until we're
+ * ready for them to initialise.
+ */
+ENTRY(spear13xx_secondary_startup)
+	mrc	p15, 0, r0, c0, c0, 5
+	and	r0, r0, #15
+	adr	r4, 1f
+	ldmia	r4, {r5, r6}
+	sub	r4, r4, r5
+	add	r6, r6, r4
+pen:	ldr	r7, [r6]
+	cmp	r7, r0
+	bne	pen
+
+	/* re-enable coherency */
+	mrc	p15, 0, r0, c1, c0, 1
+	orr	r0, r0, #(1 << 6) | (1 << 0)
+	mcr	p15, 0, r0, c1, c0, 1
+	/*
+	 * we've been released from the holding pen: secondary_stack
+	 * should now contain the SVC stack for this core
+	 */
+	b	secondary_startup
+
+	.align
+1:	.long	.
+	.long	pen_release
+ENDPROC(spear13xx_secondary_startup)

arch/arm/mach-spear13xx/hotplug.c

+/*
+ * linux/arch/arm/mach-spear13xx/hotplug.c
+ *
+ * Copyright (C) 2012 ST Microelectronics Ltd.
+ * Deepak Sikri <deepak.sikri@st.com>
+ *
+ * based upon linux/arch/arm/mach-realview/hotplug.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/smp.h>
+#include <asm/cacheflush.h>
+#include <asm/cp15.h>
+#include <asm/smp_plat.h>
+
+extern volatile int pen_release;
+
+static inline void cpu_enter_lowpower(void)
+{
+	unsigned int v;
+
+	flush_cache_all();
+	asm volatile(
+	"	mcr	p15, 0, %1, c7, c5, 0\n"
+	"	dsb\n"
+	/*
+	 * Turn off coherency
+	 */
+	"	mrc	p15, 0, %0, c1, c0, 1\n"
+	"	bic	%0, %0, #0x20\n"
+	"	mcr	p15, 0, %0, c1, c0, 1\n"
+	"	mrc	p15, 0, %0, c1, c0, 0\n"
+	"	bic	%0, %0, %2\n"
+	"	mcr	p15, 0, %0, c1, c0, 0\n"
+	: "=&r" (v)
+	: "r" (0), "Ir" (CR_C)
+	: "cc", "memory");
+}
+
+static inline void cpu_leave_lowpower(void)
+{
+	unsigned int v;
+
+	asm volatile("mrc	p15, 0, %0, c1, c0, 0\n"
+	"	orr	%0, %0, %1\n"
+	"	mcr	p15, 0, %0, c1, c0, 0\n"
+	"	mrc	p15, 0, %0, c1, c0, 1\n"
+	"	orr	%0, %0, #0x20\n"
+	"	mcr	p15, 0, %0, c1, c0, 1\n"
+	: "=&r" (v)
+	: "Ir" (CR_C)
+	: "cc");
+}
+
+static inline void platform_do_lowpower(unsigned int cpu, int *spurious)
+{
+	for (;;) {
+		wfi();
+
+		if (pen_release == cpu) {
+			/*
+			 * OK, proper wakeup, we're done
+			 */
+			break;
+		}
+
+		/*
+		 * Getting here, means that we have come out of WFI without
+		 * having been woken up - this shouldn't happen
+		 *
+		 * Just note it happening - when we're woken, we can report
+		 * its occurrence.
+		 */
+		(*spurious)++;
+	}
+}
+
+int platform_cpu_kill(unsigned int cpu)
+{
+	return 1;
+}
+
+/*
+ * platform-specific code to shutdown a CPU
+ *
+ * Called with IRQs disabled
+ */
+void __cpuinit platform_cpu_die(unsigned int cpu)
+{
+	int spurious = 0;
+
+	/*
+	 * we're ready for shutdown now, so do it
+	 */
+	cpu_enter_lowpower();
+	platform_do_lowpower(cpu, &spurious);
+
+	/*
+	 * bring this CPU back into the world of cache
+	 * coherency, and then restore interrupts
+	 */
+	cpu_leave_lowpower();
+
+	if (spurious)
+		pr_warn("CPU%u: %u spurious wakeup calls\n", cpu, spurious);
+}
+
+int platform_cpu_disable(unsigned int cpu)
+{
+	/*
+	 * we don't allow CPU 0 to be shutdown (it is still too special
+	 * e.g. clock tick interrupts)
+	 */
+	return cpu == 0 ? -EPERM : 0;
+}

arch/arm/mach-spear13xx/include/mach/debug-macro.S

+/*
+ * arch/arm/mach-spear13xx/include/mach/debug-macro.S
+ *
+ * Debugging macro include header spear13xx machine family
+ *
+ * Copyright (C) 2012 ST Microelectronics
+ * Viresh Kumar <viresh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <plat/debug-macro.S>

arch/arm/mach-spear13xx/include/mach/dma.h

+/*
+ * arch/arm/mach-spear13xx/include/mach/dma.h
+ *
+ * DMA information for SPEAr13xx machine family
+ *
+ * Copyright (C) 2012 ST Microelectronics
+ * Viresh Kumar <viresh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __MACH_DMA_H
+#define __MACH_DMA_H
+
+/* request id of all the peripherals */
+enum dma_master_info {
+	/* Accessible from only one master */
+	DMA_MASTER_MCIF = 0,
+	DMA_MASTER_FSMC = 1,
+	/* Accessible from both 0 & 1 */
+	DMA_MASTER_MEMORY = 0,
+	DMA_MASTER_ADC = 0,
+	DMA_MASTER_UART0 = 0,
+	DMA_MASTER_SSP0 = 0,
+	DMA_MASTER_I2C0 = 0,
+
+#ifdef CONFIG_MACH_SPEAR1310
+	/* Accessible from only one master */
+	SPEAR1310_DMA_MASTER_JPEG = 1,
+
+	/* Accessible from both 0 & 1 */
+	SPEAR1310_DMA_MASTER_I2S = 0,
+	SPEAR1310_DMA_MASTER_UART1 = 0,
+	SPEAR1310_DMA_MASTER_UART2 = 0,
+	SPEAR1310_DMA_MASTER_UART3 = 0,
+	SPEAR1310_DMA_MASTER_UART4 = 0,
+	SPEAR1310_DMA_MASTER_UART5 = 0,
+	SPEAR1310_DMA_MASTER_I2C1 = 0,
+	SPEAR1310_DMA_MASTER_I2C2 = 0,
+	SPEAR1310_DMA_MASTER_I2C3 = 0,
+	SPEAR1310_DMA_MASTER_I2C4 = 0,
+	SPEAR1310_DMA_MASTER_I2C5 = 0,
+	SPEAR1310_DMA_MASTER_I2C6 = 0,
+	SPEAR1310_DMA_MASTER_I2C7 = 0,
+	SPEAR1310_DMA_MASTER_SSP1 = 0,
+#endif
+
+#ifdef CONFIG_MACH_SPEAR1340
+	/* Accessible from only one master */
+	SPEAR1340_DMA_MASTER_I2S_PLAY = 1,
+	SPEAR1340_DMA_MASTER_I2S_REC = 1,
+	SPEAR1340_DMA_MASTER_I2C1 = 1,
+	SPEAR1340_DMA_MASTER_UART1 = 1,
+
+	/* following are accessible from both master 0 & 1 */
+	SPEAR1340_DMA_MASTER_SPDIF = 0,
+	SPEAR1340_DMA_MASTER_CAM = 1,
+	SPEAR1340_DMA_MASTER_VIDEO_IN = 0,
+	SPEAR1340_DMA_MASTER_MALI = 0,
+#endif
+};
+
+enum request_id {
+	DMA_REQ_ADC = 0,
+	DMA_REQ_SSP0_TX = 4,
+	DMA_REQ_SSP0_RX = 5,
+	DMA_REQ_UART0_TX = 6,
+	DMA_REQ_UART0_RX = 7,
+	DMA_REQ_I2C0_TX = 8,
+	DMA_REQ_I2C0_RX = 9,
+
+#ifdef CONFIG_MACH_SPEAR1310
+	SPEAR1310_DMA_REQ_FROM_JPEG = 2,
+	SPEAR1310_DMA_REQ_TO_JPEG = 3,
+	SPEAR1310_DMA_REQ_I2S_TX = 10,
+	SPEAR1310_DMA_REQ_I2S_RX = 11,
+
+	SPEAR1310_DMA_REQ_I2C1_RX = 0,
+	SPEAR1310_DMA_REQ_I2C1_TX = 1,
+	SPEAR1310_DMA_REQ_I2C2_RX = 2,
+	SPEAR1310_DMA_REQ_I2C2_TX = 3,
+	SPEAR1310_DMA_REQ_I2C3_RX = 4,
+	SPEAR1310_DMA_REQ_I2C3_TX = 5,
+	SPEAR1310_DMA_REQ_I2C4_RX = 6,
+	SPEAR1310_DMA_REQ_I2C4_TX = 7,
+	SPEAR1310_DMA_REQ_I2C5_RX = 8,
+	SPEAR1310_DMA_REQ_I2C5_TX = 9,
+	SPEAR1310_DMA_REQ_I2C6_RX = 10,
+	SPEAR1310_DMA_REQ_I2C6_TX = 11,
+	SPEAR1310_DMA_REQ_UART1_RX = 12,
+	SPEAR1310_DMA_REQ_UART1_TX = 13,
+	SPEAR1310_DMA_REQ_UART2_RX = 14,
+	SPEAR1310_DMA_REQ_UART2_TX = 15,
+	SPEAR1310_DMA_REQ_UART5_RX = 16,
+	SPEAR1310_DMA_REQ_UART5_TX = 17,
+	SPEAR1310_DMA_REQ_SSP1_RX = 18,
+	SPEAR1310_DMA_REQ_SSP1_TX = 19,
+	SPEAR1310_DMA_REQ_I2C7_RX = 20,
+	SPEAR1310_DMA_REQ_I2C7_TX = 21,
+	SPEAR1310_DMA_REQ_UART3_RX = 28,
+	SPEAR1310_DMA_REQ_UART3_TX = 29,
+	SPEAR1310_DMA_REQ_UART4_RX = 30,
+	SPEAR1310_DMA_REQ_UART4_TX = 31,
+#endif
+
+#ifdef CONFIG_MACH_SPEAR1340
+	SPEAR1340_DMA_REQ_SPDIF_TX = 2,
+	SPEAR1340_DMA_REQ_SPDIF_RX = 3,
+	SPEAR1340_DMA_REQ_I2S_TX = 10,
+	SPEAR1340_DMA_REQ_I2S_RX = 11,
+	SPEAR1340_DMA_REQ_UART1_TX = 12,
+	SPEAR1340_DMA_REQ_UART1_RX = 13,
+	SPEAR1340_DMA_REQ_I2C1_TX = 14,
+	SPEAR1340_DMA_REQ_I2C1_RX = 15,
+	SPEAR1340_DMA_REQ_CAM0_EVEN = 0,
+	SPEAR1340_DMA_REQ_CAM0_ODD = 1,
+	SPEAR1340_DMA_REQ_CAM1_EVEN = 2,
+	SPEAR1340_DMA_REQ_CAM1_ODD = 3,
+	SPEAR1340_DMA_REQ_CAM2_EVEN = 4,
+	SPEAR1340_DMA_REQ_CAM2_ODD = 5,
+	SPEAR1340_DMA_REQ_CAM3_EVEN = 6,
+	SPEAR1340_DMA_REQ_CAM3_ODD = 7,
+#endif
+};
+
+#endif /* __MACH_DMA_H */

arch/arm/mach-spear13xx/include/mach/generic.h

+/*
+ * arch/arm/mach-spear13xx/include/mach/generic.h
+ *
+ * spear13xx machine family generic header file
+ *
+ * Copyright (C) 2012 ST Microelectronics
+ * Viresh Kumar <viresh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __MACH_GENERIC_H
+#define __MACH_GENERIC_H
+
+#include <linux/dmaengine.h>
+#include <asm/mach/time.h>
+
+/* Add spear13xx structure declarations here */
+extern struct sys_timer spear13xx_timer;
+extern struct pl022_ssp_controller pl022_plat_data;
+extern struct dw_dma_platform_data dmac_plat_data;
+extern struct dw_dma_slave cf_dma_priv;
+extern struct dw_dma_slave nand_read_dma_priv;
+extern struct dw_dma_slave nand_write_dma_priv;
+
+/* Add spear13xx family function declarations here */
+void __init spear_setup_of_timer(void);
+void __init spear13xx_map_io(void);
+void __init spear13xx_dt_init_irq(void);
+void __init spear13xx_l2x0_init(void);
+bool dw_dma_filter(struct dma_chan *chan, void *slave);
+void spear_restart(char, const char *);
+void spear13xx_secondary_startup(void);
+
+#ifdef CONFIG_MACH_SPEAR1310
+void __init spear1310_clk_init(void);
+#else
+static inline void spear1310_clk_init(void) {}
+#endif
+
+#ifdef CONFIG_MACH_SPEAR1340
+void __init spear1340_clk_init(void);
+#else
+static inline void spear1340_clk_init(void) {}
+#endif
+
+#endif /* __MACH_GENERIC_H */

arch/arm/mach-spear13xx/include/mach/gpio.h

+/*
+ * arch/arm/mach-spear13xx/include/mach/gpio.h
+ *
+ * GPIO macros for SPEAr13xx machine family
+ *
+ * Copyright (C) 2012 ST Microelectronics
+ * Viresh Kumar <viresh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __MACH_GPIO_H
+#define __MACH_GPIO_H
+
+#include <plat/gpio.h>
+
+#endif /* __MACH_GPIO_H */

arch/arm/mach-spear13xx/include/mach/hardware.h

+/* empty */

arch/arm/mach-spear13xx/include/mach/irqs.h

+/*
+ * arch/arm/mach-spear13xx/include/mach/irqs.h
+ *
+ * IRQ helper macros for spear13xx machine family
+ *
+ * Copyright (C) 2012 ST Microelectronics
+ * Viresh Kumar <viresh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __MACH_IRQS_H
+#define __MACH_IRQS_H
+
+#define IRQ_GIC_END			160
+#define NR_IRQS				IRQ_GIC_END
+
+#endif /* __MACH_IRQS_H */

arch/arm/mach-spear13xx/include/mach/spear.h

+/*
+ * arch/arm/mach-spear13xx/include/mach/spear.h
+ *
+ * spear13xx Machine family specific definition
+ *
+ * Copyright (C) 2012 ST Microelectronics
+ * Viresh Kumar <viresh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __MACH_SPEAR13XX_H
+#define __MACH_SPEAR13XX_H
+
+#include <asm/memory.h>
+
+#define PERIP_GRP2_BASE				UL(0xB3000000)
+#define VA_PERIP_GRP2_BASE			UL(0xFE000000)
+#define MCIF_SDHCI_BASE				UL(0xB3000000)
+#define SYSRAM0_BASE				UL(0xB3800000)
+#define VA_SYSRAM0_BASE				UL(0xFE800000)
+#define SYS_LOCATION				(VA_SYSRAM0_BASE + 0x600)
+
+#define PERIP_GRP1_BASE				UL(0xE0000000)
+#define VA_PERIP_GRP1_BASE			UL(0xFD000000)
+#define UART_BASE				UL(0xE0000000)
+#define VA_UART_BASE				UL(0xFD000000)
+#define SSP_BASE				UL(0xE0100000)
+#define MISC_BASE				UL(0xE0700000)
+#define VA_MISC_BASE				IOMEM(UL(0xFD700000))
+
+#define A9SM_AND_MPMC_BASE			UL(0xEC000000)
+#define VA_A9SM_AND_MPMC_BASE			UL(0xFC000000)
+
+/* A9SM peripheral offsets */
+#define A9SM_PERIP_BASE				UL(0xEC800000)
+#define VA_A9SM_PERIP_BASE			UL(0xFC800000)
+#define VA_SCU_BASE				(VA_A9SM_PERIP_BASE + 0x00)
+
+#define L2CC_BASE				UL(0xED000000)
+#define VA_L2CC_BASE				IOMEM(UL(0xFB000000))
+
+/* others */
+#define DMAC0_BASE				UL(0xEA800000)
+#define DMAC1_BASE				UL(0xEB000000)
+#define MCIF_CF_BASE				UL(0xB2800000)
+
+/* Devices present in SPEAr1310 */
+#ifdef CONFIG_MACH_SPEAR1310
+#define SPEAR1310_RAS_GRP1_BASE			UL(0xD8000000)
+#define VA_SPEAR1310_RAS_GRP1_BASE		UL(0xFA000000)
+#define SPEAR1310_RAS_BASE			UL(0xD8400000)
+#define VA_SPEAR1310_RAS_BASE			IOMEM(UL(0xFA400000))
+#endif /* CONFIG_MACH_SPEAR1310 */
+
+/* Debug uart for linux, will be used for debug and uncompress messages */
+#define SPEAR_DBG_UART_BASE			UART_BASE
+#define VA_SPEAR_DBG_UART_BASE			VA_UART_BASE
+
+#endif /* __MACH_SPEAR13XX_H */

arch/arm/mach-spear13xx/include/mach/timex.h

+/*
+ * arch/arm/mach-spear3xx/include/mach/timex.h
+ *
+ * SPEAr3XX machine family specific timex definitions
+ *
+ * Copyright (C) 2012 ST Microelectronics
+ * Viresh Kumar <viresh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __MACH_TIMEX_H
+#define __MACH_TIMEX_H
+
+#include <plat/timex.h>
+
+#endif /* __MACH_TIMEX_H */

arch/arm/mach-spear13xx/include/mach/uncompress.h

+/*
+ * arch/arm/mach-spear13xx/include/mach/uncompress.h
+ *
+ * Serial port stubs for kernel decompress status messages
+ *
+ * Copyright (C) 2012 ST Microelectronics
+ * Viresh Kumar <viresh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __MACH_UNCOMPRESS_H
+#define __MACH_UNCOMPRESS_H
+
+#include <plat/uncompress.h>
+
+#endif /* __MACH_UNCOMPRESS_H */

arch/arm/mach-spear13xx/platsmp.c

+/*
+ * arch/arm/mach-spear13xx/platsmp.c
+ *
+ * based upon linux/arch/arm/mach-realview/platsmp.c
+ *
+ * Copyright (C) 2012 ST Microelectronics Ltd.
+ * Shiraz Hashim <shiraz.hashim@st.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/delay.h>
+#include <linux/jiffies.h>
+#include <linux/io.h>
+#include <linux/smp.h>
+#include <asm/cacheflush.h>
+#include <asm/hardware/gic.h>
+#include <asm/smp_scu.h>
+#include <mach/spear.h>
+
+/*
+ * control for which core is the next to come out of the secondary
+ * boot "holding pen"
+ */
+volatile int __cpuinitdata pen_release = -1;
+static DEFINE_SPINLOCK(boot_lock);
+
+static void __iomem *scu_base = IOMEM(VA_SCU_BASE);
+extern void spear13xx_secondary_startup(void);
+
+void __cpuinit platform_secondary_init(unsigned int cpu)
+{
+	/*
+	 * if any interrupts are already enabled for the primary
+	 * core (e.g. timer irq), then they will not have been enabled
+	 * for us: do so
+	 */
+	gic_secondary_init(0);
+
+	/*
+	 * let the primary processor know we're out of the
+	 * pen, then head off into the C entry point
+	 */
+	pen_release = -1;
+	smp_wmb();
+
+	/*
+	 * Synchronise with the boot thread.
+	 */
+	spin_lock(&boot_lock);
+	spin_unlock(&boot_lock);
+}
+
+int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle)
+{
+	unsigned long timeout;
+
+	/*
+	 * set synchronisation state between this boot processor
+	 * and the secondary one
+	 */
+	spin_lock(&boot_lock);
+
+	/*
+	 * The secondary processor is waiting to be released from
+	 * the holding pen - release it, then wait for it to flag
+	 * that it has been released by resetting pen_release.
+	 *
+	 * Note that "pen_release" is the hardware CPU ID, whereas
+	 * "cpu" is Linux's internal ID.
+	 */
+	pen_release = cpu;
+	flush_cache_all();
+	outer_flush_all();
+
+	timeout = jiffies + (1 * HZ);
+	while (time_before(jiffies, timeout)) {
+		smp_rmb();
+		if (pen_release == -1)
+			break;
+
+		udelay(10);
+	}
+
+	/*
+	 * now the secondary core is starting up let it run its
+	 * calibrations, then wait for it to finish
+	 */
+	spin_unlock(&boot_lock);
+
+	return pen_release != -1 ? -ENOSYS : 0;
+}
+
+/*
+ * Initialise the CPU possible map early - this describes the CPUs
+ * which may be present or become present in the system.
+ */
+void __init smp_init_cpus(void)
+{
+	unsigned int i, ncores = scu_get_core_count(scu_base);
+
+	if (ncores > nr_cpu_ids) {
+		pr_warn("SMP: %u cores greater than maximum (%u), clipping\n",
+			ncores, nr_cpu_ids);
+		ncores = nr_cpu_ids;
+	}
+
+	for (i = 0; i < ncores; i++)
+		set_cpu_possible(i, true);
+
+	set_smp_cross_call(gic_raise_softirq);
+}
+
+void __init platform_smp_prepare_cpus(unsigned int max_cpus)
+{
+
+	scu_enable(scu_base);
+
+	/*
+	 * Write the address of secondary startup into the system-wide location
+	 * (presently it is in SRAM). The BootMonitor waits until it receives a
+	 * soft interrupt, and then the secondary CPU branches to this address.
+	 */
+	__raw_writel(virt_to_phys(spear13xx_secondary_startup), SYS_LOCATION);
+}

arch/arm/mach-spear13xx/spear1310.c

+/*
+ * arch/arm/mach-spear13xx/spear1310.c
+ *
+ * SPEAr1310 machine source file
+ *
+ * Copyright (C) 2012 ST Microelectronics
+ * Viresh Kumar <viresh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#define pr_fmt(fmt) "SPEAr1310: " fmt
+
+#include <linux/amba/pl022.h>
+#include <linux/of_platform.h>
+#include <asm/hardware/gic.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <mach/generic.h>
+#include <mach/spear.h>
+
+/* Base addresses */
+#define SPEAR1310_SSP1_BASE			UL(0x5D400000)
+#define SPEAR1310_SATA0_BASE			UL(0xB1000000)
+#define SPEAR1310_SATA1_BASE			UL(0xB1800000)
+#define SPEAR1310_SATA2_BASE			UL(0xB4000000)
+
+/* ssp device registration */
+static struct pl022_ssp_controller ssp1_plat_data = {
+	.bus_id = 0,
+	.enable_dma = 0,
+	.num_chipselect = 3,
+};
+
+/* Add SPEAr1310 auxdata to pass platform data */
+static struct of_dev_auxdata spear1310_auxdata_lookup[] __initdata = {
+	OF_DEV_AUXDATA("arasan,cf-spear1340", MCIF_CF_BASE, NULL, &cf_dma_priv),
+	OF_DEV_AUXDATA("snps,dma-spear1340", DMAC0_BASE, NULL, &dmac_plat_data),
+	OF_DEV_AUXDATA("snps,dma-spear1340", DMAC1_BASE, NULL, &dmac_plat_data),
+	OF_DEV_AUXDATA("arm,pl022", SSP_BASE, NULL, &pl022_plat_data),
+
+	OF_DEV_AUXDATA("arm,pl022", SPEAR1310_SSP1_BASE, NULL, &ssp1_plat_data),
+	{}
+};
+
+static void __init spear1310_dt_init(void)
+{
+	of_platform_populate(NULL, of_default_bus_match_table,
+			spear1310_auxdata_lookup, NULL);
+}
+
+static const char * const spear1310_dt_board_compat[] = {
+	"st,spear1310",
+	"st,spear1310-evb",
+	NULL,
+};
+
+/*
+ * Following will create 16MB static virtual/physical mappings
+ * PHYSICAL		VIRTUAL
+ * 0xD8000000		0xFA000000
+ */
+struct map_desc spear1310_io_desc[] __initdata = {
+	{
+		.virtual	= VA_SPEAR1310_RAS_GRP1_BASE,
+		.pfn		= __phys_to_pfn(SPEAR1310_RAS_GRP1_BASE),
+		.length		= SZ_16M,
+		.type		= MT_DEVICE
+	},
+};
+
+static void __init spear1310_map_io(void)
+{
+	iotable_init(spear1310_io_desc, ARRAY_SIZE(spear1310_io_desc));
+	spear13xx_map_io();
+}
+
+DT_MACHINE_START(SPEAR1310_DT, "ST SPEAr1310 SoC with Flattened Device Tree")
+	.map_io		=	spear1310_map_io,
+	.init_irq	=	spear13xx_dt_init_irq,
+	.handle_irq	=	gic_handle_irq,
+	.timer		=	&spear13xx_timer,
+	.init_machine	=	spear1310_dt_init,
+	.restart	=	spear_restart,
+	.dt_compat	=	spear1310_dt_board_compat,
+MACHINE_END

arch/arm/mach-spear13xx/spear1340.c

+/*
+ * arch/arm/mach-spear13xx/spear1340.c
+ *
+ * SPEAr1340 machine source file
+ *
+ * Copyright (C) 2012 ST Microelectronics
+ * Viresh Kumar <viresh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#define pr_fmt(fmt) "SPEAr1340: " fmt
+
+#include <linux/ahci_platform.h>
+#include <linux/amba/serial.h>
+#include <linux/delay.h>
+#include <linux/dw_dmac.h>
+#include <linux/of_platform.h>
+#include <asm/hardware/gic.h>
+#include <asm/mach/arch.h>
+#include <mach/dma.h>
+#include <mach/generic.h>
+#include <mach/spear.h>
+
+/* Base addresses */
+#define SPEAR1340_SATA_BASE			UL(0xB1000000)
+#define SPEAR1340_UART1_BASE			UL(0xB4100000)
+
+/* Power Management Registers */
+#define SPEAR1340_PCM_CFG			(VA_MISC_BASE + 0x100)
+#define SPEAR1340_PCM_WKUP_CFG			(VA_MISC_BASE + 0x104)
+#define SPEAR1340_SWITCH_CTR			(VA_MISC_BASE + 0x108)
+
+#define SPEAR1340_PERIP1_SW_RST			(VA_MISC_BASE + 0x318)
+#define SPEAR1340_PERIP2_SW_RST			(VA_MISC_BASE + 0x31C)
+#define SPEAR1340_PERIP3_SW_RST			(VA_MISC_BASE + 0x320)
+
+/* PCIE - SATA configuration registers */
+#define SPEAR1340_PCIE_SATA_CFG			(VA_MISC_BASE + 0x424)
+	/* PCIE CFG MASks */
+	#define SPEAR1340_PCIE_CFG_DEVICE_PRESENT	(1 << 11)
+	#define SPEAR1340_PCIE_CFG_POWERUP_RESET	(1 << 10)
+	#define SPEAR1340_PCIE_CFG_CORE_CLK_EN		(1 << 9)
+	#define SPEAR1340_PCIE_CFG_AUX_CLK_EN		(1 << 8)
+	#define SPEAR1340_SATA_CFG_TX_CLK_EN		(1 << 4)
+	#define SPEAR1340_SATA_CFG_RX_CLK_EN		(1 << 3)
+	#define SPEAR1340_SATA_CFG_POWERUP_RESET	(1 << 2)
+	#define SPEAR1340_SATA_CFG_PM_CLK_EN		(1 << 1)
+	#define SPEAR1340_PCIE_SATA_SEL_PCIE		(0)
+	#define SPEAR1340_PCIE_SATA_SEL_SATA		(1)
+	#define SPEAR1340_SATA_PCIE_CFG_MASK		0xF1F
+	#define SPEAR1340_PCIE_CFG_VAL	(SPEAR1340_PCIE_SATA_SEL_PCIE | \
+			SPEAR1340_PCIE_CFG_AUX_CLK_EN | \
+			SPEAR1340_PCIE_CFG_CORE_CLK_EN | \
+			SPEAR1340_PCIE_CFG_POWERUP_RESET | \
+			SPEAR1340_PCIE_CFG_DEVICE_PRESENT)
+	#define SPEAR1340_SATA_CFG_VAL	(SPEAR1340_PCIE_SATA_SEL_SATA | \
+			SPEAR1340_SATA_CFG_PM_CLK_EN | \
+			SPEAR1340_SATA_CFG_POWERUP_RESET | \
+			SPEAR1340_SATA_CFG_RX_CLK_EN | \
+			SPEAR1340_SATA_CFG_TX_CLK_EN)
+
+#define SPEAR1340_PCIE_MIPHY_CFG		(VA_MISC_BASE + 0x428)
+	#define SPEAR1340_MIPHY_OSC_BYPASS_EXT		(1 << 31)
+	#define SPEAR1340_MIPHY_CLK_REF_DIV2		(1 << 27)
+	#define SPEAR1340_MIPHY_CLK_REF_DIV4		(2 << 27)
+	#define SPEAR1340_MIPHY_CLK_REF_DIV8		(3 << 27)
+	#define SPEAR1340_MIPHY_PLL_RATIO_TOP(x)	(x << 0)
+	#define SPEAR1340_PCIE_SATA_MIPHY_CFG_SATA \
+			(SPEAR1340_MIPHY_OSC_BYPASS_EXT | \
+			SPEAR1340_MIPHY_CLK_REF_DIV2 | \
+			SPEAR1340_MIPHY_PLL_RATIO_TOP(60))
+	#define SPEAR1340_PCIE_SATA_MIPHY_CFG_SATA_25M_CRYSTAL_CLK \
+			(SPEAR1340_MIPHY_PLL_RATIO_TOP(120))
+	#define SPEAR1340_PCIE_SATA_MIPHY_CFG_PCIE \
+			(SPEAR1340_MIPHY_OSC_BYPASS_EXT | \
+			SPEAR1340_MIPHY_PLL_RATIO_TOP(25))
+
+static struct dw_dma_slave uart1_dma_param[] = {
+	{
+		/* Tx */
+		.cfg_hi = DWC_CFGH_DST_PER(SPEAR1340_DMA_REQ_UART1_TX),
+		.cfg_lo = 0,
+		.src_master = DMA_MASTER_MEMORY,
+		.dst_master = SPEAR1340_DMA_MASTER_UART1,
+	}, {
+		/* Rx */
+		.cfg_hi = DWC_CFGH_SRC_PER(SPEAR1340_DMA_REQ_UART1_RX),
+		.cfg_lo = 0,
+		.src_master = SPEAR1340_DMA_MASTER_UART1,
+		.dst_master = DMA_MASTER_MEMORY,
+	}
+};
+
+static struct amba_pl011_data uart1_data = {
+	.dma_filter = dw_dma_filter,
+	.dma_tx_param = &uart1_dma_param[0],
+	.dma_rx_param = &uart1_dma_param[1],
+};
+
+/* SATA device registration */
+static int sata_miphy_init(struct device *dev, void __iomem *addr)
+{
+	writel(SPEAR1340_SATA_CFG_VAL, SPEAR1340_PCIE_SATA_CFG);
+	writel(SPEAR1340_PCIE_SATA_MIPHY_CFG_SATA_25M_CRYSTAL_CLK,
+			SPEAR1340_PCIE_MIPHY_CFG);
+	/* Switch on sata power domain */
+	writel((readl(SPEAR1340_PCM_CFG) | (0x800)), SPEAR1340_PCM_CFG);
+	msleep(20);
+	/* Disable PCIE SATA Controller reset */
+	writel((readl(SPEAR1340_PERIP1_SW_RST) & (~0x1000)),
+			SPEAR1340_PERIP1_SW_RST);
+	msleep(20);
+
+	return 0;
+}
+
+void sata_miphy_exit(struct device *dev)
+{
+	writel(0, SPEAR1340_PCIE_SATA_CFG);
+	writel(0, SPEAR1340_PCIE_MIPHY_CFG);
+
+	/* Enable PCIE SATA Controller reset */
+	writel((readl(SPEAR1340_PERIP1_SW_RST) | (0x1000)),
+			SPEAR1340_PERIP1_SW_RST);
+	msleep(20);
+	/* Switch off sata power domain */
+	writel((readl(SPEAR1340_PCM_CFG) & (~0x800)), SPEAR1340_PCM_CFG);
+	msleep(20);
+}
+
+int sata_suspend(struct device *dev)
+{
+	if (dev->power.power_state.event == PM_EVENT_FREEZE)
+		return 0;
+
+	sata_miphy_exit(dev);
+
+	return 0;
+}
+
+int sata_resume(struct device *dev)
+{
+	if (dev->power.power_state.event == PM_EVENT_THAW)
+		return 0;
+
+	return sata_miphy_init(dev, NULL);
+}
+
+static struct ahci_platform_data sata_pdata = {
+	.init = sata_miphy_init,
+	.exit = sata_miphy_exit,
+	.suspend = sata_suspend,
+	.resume = sata_resume,
+};
+
+/* Add SPEAr1340 auxdata to pass platform data */
+static struct of_dev_auxdata spear1340_auxdata_lookup[] __initdata = {
+	OF_DEV_AUXDATA("arasan,cf-spear1340", MCIF_CF_BASE, NULL, &cf_dma_priv),
+	OF_DEV_AUXDATA("snps,dma-spear1340", DMAC0_BASE, NULL, &dmac_plat_data),
+	OF_DEV_AUXDATA("snps,dma-spear1340", DMAC1_BASE, NULL, &dmac_plat_data),
+	OF_DEV_AUXDATA("arm,pl022", SSP_BASE, NULL, &pl022_plat_data),
+
+	OF_DEV_AUXDATA("snps,spear-ahci", SPEAR1340_SATA_BASE, NULL,
+			&sata_pdata),
+	OF_DEV_AUXDATA("arm,pl011", SPEAR1340_UART1_BASE, NULL, &uart1_data),
+	{}
+};
+
+static void __init spear1340_dt_init(void)
+{
+	of_platform_populate(NULL, of_default_bus_match_table,
+			spear1340_auxdata_lookup, NULL);
+}
+
+static const char * const spear1340_dt_board_compat[] = {
+	"st,spear1340",
+	"st,spear1340-evb",
+	NULL,
+};
+
+DT_MACHINE_START(SPEAR1340_DT, "ST SPEAr1340 SoC with Flattened Device Tree")
+	.map_io		=	spear13xx_map_io,
+	.init_irq	=	spear13xx_dt_init_irq,
+	.handle_irq	=	gic_handle_irq,
+	.timer		=	&spear13xx_timer,
+	.init_machine	=	spear1340_dt_init,
+	.restart	=	spear_restart,
+	.dt_compat	=	spear1340_dt_board_compat,
+MACHINE_END

arch/arm/mach-spear13xx/spear13xx.c

+/*
+ * arch/arm/mach-spear13xx/spear13xx.c
+ *
+ * SPEAr13XX machines common source file
+ *
+ * Copyright (C) 2012 ST Microelectronics
+ * Viresh Kumar <viresh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#define pr_fmt(fmt) "SPEAr13xx: " fmt
+
+#include <linux/amba/pl022.h>
+#include <linux/clk.h>
+#include <linux/dw_dmac.h>
+#include <linux/err.h>
+#include <linux/of_irq.h>
+#include <asm/hardware/cache-l2x0.h>
+#include <asm/hardware/gic.h>
+#include <asm/mach/map.h>
+#include <asm/smp_twd.h>
+#include <mach/dma.h>
+#include <mach/generic.h>
+#include <mach/spear.h>
+
+/* common dw_dma filter routine to be used by peripherals */
+bool dw_dma_filter(struct dma_chan *chan, void *slave)
+{
+	struct dw_dma_slave *dws = (struct dw_dma_slave *)slave;
+
+	if (chan->device->dev == dws->dma_dev) {
+		chan->private = slave;
+		return true;
+	} else {
+		return false;
+	}
+}
+
+/* ssp device registration */
+static struct dw_dma_slave ssp_dma_param[] = {
+	{
+		/* Tx */
+		.cfg_hi = DWC_CFGH_DST_PER(DMA_REQ_SSP0_TX),
+		.cfg_lo = 0,
+		.src_master = DMA_MASTER_MEMORY,
+		.dst_master = DMA_MASTER_SSP0,
+	}, {
+		/* Rx */
+		.cfg_hi = DWC_CFGH_SRC_PER(DMA_REQ_SSP0_RX),
+		.cfg_lo = 0,
+		.src_master = DMA_MASTER_SSP0,
+		.dst_master = DMA_MASTER_MEMORY,
+	}
+};
+
+struct pl022_ssp_controller pl022_plat_data = {
+	.bus_id = 0,
+	.enable_dma = 1,
+	.dma_filter = dw_dma_filter,
+	.dma_rx_param = &ssp_dma_param[1],
+	.dma_tx_param = &ssp_dma_param[0],
+	.num_chipselect = 3,
+};
+
+/* CF device registration */
+struct dw_dma_slave cf_dma_priv = {
+	.cfg_hi = 0,
+	.cfg_lo = 0,
+	.src_master = 0,
+	.dst_master = 0,
+};
+
+/* dmac device registeration */
+struct dw_dma_platform_data dmac_plat_data = {
+	.nr_channels = 8,
+	.chan_allocation_order = CHAN_ALLOCATION_DESCENDING,
+	.chan_priority = CHAN_PRIORITY_DESCENDING,
+};
+
+void __init spear13xx_l2x0_init(void)
+{
+	/*
+	 * 512KB (64KB/way), 8-way associativity, parity supported
+	 *
+	 * FIXME: 9th bit, of Auxillary Controller register must be set
+	 * for some spear13xx devices for stable L2 operation.
+	 *
+	 * Enable Early BRESP, L2 prefetch for Instruction and Data,
+	 * write alloc and 'Full line of zero' options
+	 *
+	 */
+
+	writel_relaxed(0x06, VA_L2CC_BASE + L2X0_PREFETCH_CTRL);
+
+	/*
+	 * Program following latencies in order to make
+	 * SPEAr1340 work at 600 MHz
+	 */
+	writel_relaxed(0x221, VA_L2CC_BASE + L2X0_TAG_LATENCY_CTRL);
+	writel_relaxed(0x441, VA_L2CC_BASE + L2X0_DATA_LATENCY_CTRL);
+	l2x0_init(VA_L2CC_BASE, 0x70A60001, 0xfe00ffff);
+}
+
+/*
+ * Following will create 16MB static virtual/physical mappings
+ * PHYSICAL		VIRTUAL
+ * 0xB3000000		0xFE000000
+ * 0xE0000000		0xFD000000
+ * 0xEC000000		0xFC000000
+ * 0xED000000		0xFB000000
+ */
+struct map_desc spear13xx_io_desc[] __initdata = {
+	{
+		.virtual	= VA_PERIP_GRP2_BASE,
+		.pfn		= __phys_to_pfn(PERIP_GRP2_BASE),
+		.length		= SZ_16M,
+		.type		= MT_DEVICE
+	}, {
+		.virtual	= VA_PERIP_GRP1_BASE,
+		.pfn		= __phys_to_pfn(PERIP_GRP1_BASE),
+		.length		= SZ_16M,
+		.type		= MT_DEVICE
+	}, {
+		.virtual	= VA_A9SM_AND_MPMC_BASE,
+		.pfn		= __phys_to_pfn(A9SM_AND_MPMC_BASE),
+		.length		= SZ_16M,
+		.type		= MT_DEVICE
+	}, {
+		.virtual	= (unsigned long)VA_L2CC_BASE,
+		.pfn		= __phys_to_pfn(L2CC_BASE),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE
+	},
+};
+
+/* This will create static memory mapping for selected devices */
+void __init spear13xx_map_io(void)
+{
+	iotable_init(spear13xx_io_desc, ARRAY_SIZE(spear13xx_io_desc));
+}
+
+static void __init spear13xx_clk_init(void)
+{
+	if (of_machine_is_compatible("st,spear1310"))
+		spear1310_clk_init();
+	else if (of_machine_is_compatible("st,spear1340"))
+		spear1340_clk_init();
+	else
+		pr_err("%s: Unknown machine\n", __func__);
+}
+
+static void __init spear13xx_timer_init(void)
+{
+	char pclk_name[] = "osc_24m_clk";
+	struct clk *gpt_clk, *pclk;
+
+	spear13xx_clk_init();
+
+	/* get the system timer clock */
+	gpt_clk = clk_get_sys("gpt0", NULL);
+	if (IS_ERR(gpt_clk)) {
+		pr_err("%s:couldn't get clk for gpt\n", __func__);
+		BUG();
+	}
+
+	/* get the suitable parent clock for timer*/
+	pclk = clk_get(NULL, pclk_name);
+	if (IS_ERR(pclk)) {
+		pr_err("%s:couldn't get %s as parent for gpt\n", __func__,
+				pclk_name);
+		BUG();
+	}
+
+	clk_set_parent(gpt_clk, pclk);
+	clk_put(gpt_clk);
+	clk_put(pclk);
+
+	spear_setup_of_timer();
+	twd_local_timer_of_register();
+}
+
+struct sys_timer spear13xx_timer = {
+	.init = spear13xx_timer_init,
+};
+
+static const struct of_device_id gic_of_match[] __initconst = {
+	{ .compatible = "arm,cortex-a9-gic", .data = gic_of_init },
+	{ /* Sentinel */ }
+};
+
+void __init spear13xx_dt_init_irq(void)
+{
+	of_irq_init(gic_of_match);
+}

arch/arm/plat-samsung/Kconfig

@@ -419,7 +419,7 @@ config S3C_DMA
 config SAMSUNG_DMADEV
 	bool
 	select DMADEVICES
-	select PL330_DMA if (CPU_EXYNOS4210 || CPU_S5PV210 || CPU_S5PC100 || \
+	select PL330_DMA if (ARCH_EXYNOS5 || ARCH_EXYNOS4 || CPU_S5PV210 || CPU_S5PC100 || \
 					CPU_S5P6450 || CPU_S5P6440)
 	select ARM_AMBA
 	help

arch/arm/plat-samsung/include/plat/cpu.h

@@ -202,7 +202,7 @@ extern struct bus_type s3c2443_subsys;
 extern struct bus_type s3c6410_subsys;
 extern struct bus_type s5p64x0_subsys;
 extern struct bus_type s5pv210_subsys;
-extern struct bus_type exynos4_subsys;
+extern struct bus_type exynos_subsys;
 
 extern void (*s5pc1xx_idle)(void);
 

arch/arm/plat-samsung/include/plat/devs.h

@@ -134,6 +134,8 @@ extern struct platform_device exynos4_device_pcm2;
 extern struct platform_device exynos4_device_pd[];
 extern struct platform_device exynos4_device_spdif;
 
+extern struct platform_device exynos_device_drm;
+
 extern struct platform_device samsung_asoc_dma;
 extern struct platform_device samsung_asoc_idma;
 extern struct platform_device samsung_device_keypad;

arch/arm/plat-samsung/include/plat/dma-pl330.h

@@ -90,6 +90,7 @@ enum dma_ch {
 	DMACH_MIPI_HSI5,
 	DMACH_MIPI_HSI6,
 	DMACH_MIPI_HSI7,
+	DMACH_DISP1,
 	DMACH_MTOM_0,
 	DMACH_MTOM_1,
 	DMACH_MTOM_2,

arch/arm/plat-samsung/include/plat/s5p-clock.h

@@ -32,8 +32,10 @@ extern struct clk clk_48m;
 extern struct clk s5p_clk_27m;
 extern struct clk clk_fout_apll;
 extern struct clk clk_fout_bpll;
+extern struct clk clk_fout_bpll_div2;
 extern struct clk clk_fout_cpll;
 extern struct clk clk_fout_mpll;
+extern struct clk clk_fout_mpll_div2;
 extern struct clk clk_fout_epll;
 extern struct clk clk_fout_dpll;
 extern struct clk clk_fout_vpll;
@@ -42,8 +44,10 @@ extern struct clk clk_vpll;
 
 extern struct clksrc_sources clk_src_apll;
 extern struct clksrc_sources clk_src_bpll;
+extern struct clksrc_sources clk_src_bpll_fout;
 extern struct clksrc_sources clk_src_cpll;
 extern struct clksrc_sources clk_src_mpll;
+extern struct clksrc_sources clk_src_mpll_fout;
 extern struct clksrc_sources clk_src_epll;
 extern struct clksrc_sources clk_src_dpll;
 

arch/arm/plat-samsung/s5p-clock.c

@@ -67,6 +67,11 @@ struct clk clk_fout_bpll = {
 	.id		= -1,
 };
 
+struct clk clk_fout_bpll_div2 = {
+	.name		= "fout_bpll_div2",
+	.id		= -1,
+};
+
 /* CPLL clock output */
 
 struct clk clk_fout_cpll = {
@@ -82,6 +87,11 @@ struct clk clk_fout_mpll = {
 	.id		= -1,
 };
 
+struct clk clk_fout_mpll_div2 = {
+	.name		= "fout_mpll_div2",
+	.id		= -1,
+};
+
 /* EPLL clock output */
 struct clk clk_fout_epll = {
 	.name		= "fout_epll",
@@ -125,6 +135,16 @@ struct clksrc_sources clk_src_bpll = {
 	.nr_sources	= ARRAY_SIZE(clk_src_bpll_list),
 };
 
+static struct clk *clk_src_bpll_fout_list[] = {
+	[0] = &clk_fout_bpll_div2,
+	[1] = &clk_fout_bpll,
+};
+
+struct clksrc_sources clk_src_bpll_fout = {
+	.sources	= clk_src_bpll_fout_list,
+	.nr_sources	= ARRAY_SIZE(clk_src_bpll_fout_list),
+};
+
 /* Possible clock sources for CPLL Mux */
 static struct clk *clk_src_cpll_list[] = {
 	[0] = &clk_fin_cpll,
@@ -147,6 +167,16 @@ struct clksrc_sources clk_src_mpll = {
 	.nr_sources	= ARRAY_SIZE(clk_src_mpll_list),
 };
 
+static struct clk *clk_src_mpll_fout_list[] = {
+	[0] = &clk_fout_mpll_div2,
+	[1] = &clk_fout_mpll,
+};
+
+struct clksrc_sources clk_src_mpll_fout = {
+	.sources	= clk_src_mpll_fout_list,
+	.nr_sources	= ARRAY_SIZE(clk_src_mpll_fout_list),
+};
+
 /* Possible clock sources for EPLL Mux */
 static struct clk *clk_src_epll_list[] = {
 	[0] = &clk_fin_epll,

arch/arm/plat-spear/Kconfig

@@ -8,6 +8,17 @@ choice
 	prompt "ST SPEAr Family"
 	default ARCH_SPEAR3XX
 
+config ARCH_SPEAR13XX
+	bool "ST SPEAr13xx with Device Tree"
+	select ARM_GIC
+	select CPU_V7
+	select USE_OF
+	select HAVE_SMP
+	select MIGHT_HAVE_CACHE_L2X0
+	select PINCTRL
+	help
+	  Supports for ARM's SPEAR13XX family
+
 config ARCH_SPEAR3XX
 	bool "ST SPEAr3xx with Device Tree"
 	select ARM_VIC
@@ -27,6 +38,7 @@ config ARCH_SPEAR6XX
 endchoice
 
 # Adding SPEAr machine specific configuration files
+source "arch/arm/mach-spear13xx/Kconfig"
 source "arch/arm/mach-spear3xx/Kconfig"
 source "arch/arm/mach-spear6xx/Kconfig"
 

arch/arm/plat-spear/Makefile

@@ -3,6 +3,7 @@
 #
 
 # Common support
-obj-y	:= restart.o time.o pl080.o
+obj-y	:= restart.o time.o
 
-obj-$(CONFIG_ARCH_SPEAR3XX)	+= shirq.o
+obj-$(CONFIG_ARCH_SPEAR3XX)	+= pl080.o shirq.o
+obj-$(CONFIG_ARCH_SPEAR6XX)	+= pl080.o

arch/arm/plat-spear/restart.c

@@ -16,6 +16,7 @@
 #include <mach/spear.h>
 #include <mach/generic.h>
 
+#define SPEAR13XX_SYS_SW_RES			(VA_MISC_BASE + 0x204)
 void spear_restart(char mode, const char *cmd)
 {
 	if (mode == 's') {
@@ -23,6 +24,10 @@ void spear_restart(char mode, const char *cmd)
 		soft_restart(0);
 	} else {
 		/* hardware reset, Use on-chip reset capability */
+#ifdef CONFIG_ARCH_SPEAR13XX
+		writel_relaxed(0x01, SPEAR13XX_SYS_SW_RES);
+#else
 		sysctl_soft_reset((void __iomem *)VA_SPEAR_SYS_CTRL_BASE);
+#endif
 	}
 }

drivers/clk/spear/Makefile

@@ -6,3 +6,5 @@ obj-y	+= clk.o clk-aux-synth.o clk-frac-synth.o clk-gpt-synth.o clk-vco-pll.o
 
 obj-$(CONFIG_ARCH_SPEAR3XX)	+= spear3xx_clock.o
 obj-$(CONFIG_ARCH_SPEAR6XX)	+= spear6xx_clock.o
+obj-$(CONFIG_MACH_SPEAR1310)	+= spear1310_clock.o
+obj-$(CONFIG_MACH_SPEAR1340)	+= spear1340_clock.o

drivers/clk/spear/spear1310_clock.c

+/*
+ * arch/arm/mach-spear13xx/spear1310_clock.c
+ *
+ * SPEAr1310 machine clock framework source file
+ *
+ * Copyright (C) 2012 ST Microelectronics
+ * Viresh Kumar <viresh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/clk.h>
+#include <linux/clkdev.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/of_platform.h>
+#include <linux/spinlock_types.h>
+#include <mach/spear.h>
+#include "clk.h"
+
+/* PLL related registers and bit values */
+#define SPEAR1310_PLL_CFG			(VA_MISC_BASE + 0x210)
+	/* PLL_CFG bit values */
+	#define SPEAR1310_CLCD_SYNT_CLK_MASK		1
+	#define SPEAR1310_CLCD_SYNT_CLK_SHIFT		31
+	#define SPEAR1310_RAS_SYNT2_3_CLK_MASK		2
+	#define SPEAR1310_RAS_SYNT2_3_CLK_SHIFT		29
+	#define SPEAR1310_RAS_SYNT_CLK_MASK		2
+	#define SPEAR1310_RAS_SYNT0_1_CLK_SHIFT		27
+	#define SPEAR1310_PLL_CLK_MASK			2
+	#define SPEAR1310_PLL3_CLK_SHIFT		24
+	#define SPEAR1310_PLL2_CLK_SHIFT		22
+	#define SPEAR1310_PLL1_CLK_SHIFT		20
+
+#define SPEAR1310_PLL1_CTR			(VA_MISC_BASE + 0x214)
+#define SPEAR1310_PLL1_FRQ			(VA_MISC_BASE + 0x218)
+#define SPEAR1310_PLL2_CTR			(VA_MISC_BASE + 0x220)
+#define SPEAR1310_PLL2_FRQ			(VA_MISC_BASE + 0x224)
+#define SPEAR1310_PLL3_CTR			(VA_MISC_BASE + 0x22C)
+#define SPEAR1310_PLL3_FRQ			(VA_MISC_BASE + 0x230)
+#define SPEAR1310_PLL4_CTR			(VA_MISC_BASE + 0x238)
+#define SPEAR1310_PLL4_FRQ			(VA_MISC_BASE + 0x23C)
+#define SPEAR1310_PERIP_CLK_CFG			(VA_MISC_BASE + 0x244)
+	/* PERIP_CLK_CFG bit values */
+	#define SPEAR1310_GPT_OSC24_VAL			0
+	#define SPEAR1310_GPT_APB_VAL			1
+	#define SPEAR1310_GPT_CLK_MASK			1
+	#define SPEAR1310_GPT3_CLK_SHIFT		11
+	#define SPEAR1310_GPT2_CLK_SHIFT		10
+	#define SPEAR1310_GPT1_CLK_SHIFT		9
+	#define SPEAR1310_GPT0_CLK_SHIFT		8
+	#define SPEAR1310_UART_CLK_PLL5_VAL		0
+	#define SPEAR1310_UART_CLK_OSC24_VAL		1
+	#define SPEAR1310_UART_CLK_SYNT_VAL		2
+	#define SPEAR1310_UART_CLK_MASK			2
+	#define SPEAR1310_UART_CLK_SHIFT		4
+
+	#define SPEAR1310_AUX_CLK_PLL5_VAL		0
+	#define SPEAR1310_AUX_CLK_SYNT_VAL		1
+	#define SPEAR1310_CLCD_CLK_MASK			2
+	#define SPEAR1310_CLCD_CLK_SHIFT		2
+	#define SPEAR1310_C3_CLK_MASK			1
+	#define SPEAR1310_C3_CLK_SHIFT			1
+
+#define SPEAR1310_GMAC_CLK_CFG			(VA_MISC_BASE + 0x248)
+	#define SPEAR1310_GMAC_PHY_IF_SEL_MASK		3
+	#define SPEAR1310_GMAC_PHY_IF_SEL_SHIFT		4
+	#define SPEAR1310_GMAC_PHY_CLK_MASK		1
+	#define SPEAR1310_GMAC_PHY_CLK_SHIFT		3
+	#define SPEAR1310_GMAC_PHY_INPUT_CLK_MASK	2
+	#define SPEAR1310_GMAC_PHY_INPUT_CLK_SHIFT	1
+
+#define SPEAR1310_I2S_CLK_CFG			(VA_MISC_BASE + 0x24C)
+	/* I2S_CLK_CFG register mask */
+	#define SPEAR1310_I2S_SCLK_X_MASK		0x1F
+	#define SPEAR1310_I2S_SCLK_X_SHIFT		27
+	#define SPEAR1310_I2S_SCLK_Y_MASK		0x1F
+	#define SPEAR1310_I2S_SCLK_Y_SHIFT		22
+	#define SPEAR1310_I2S_SCLK_EQ_SEL_SHIFT		21
+	#define SPEAR1310_I2S_SCLK_SYNTH_ENB		20
+	#define SPEAR1310_I2S_PRS1_CLK_X_MASK		0xFF
+	#define SPEAR1310_I2S_PRS1_CLK_X_SHIFT		12
+	#define SPEAR1310_I2S_PRS1_CLK_Y_MASK		0xFF
+	#define SPEAR1310_I2S_PRS1_CLK_Y_SHIFT		4
+	#define SPEAR1310_I2S_PRS1_EQ_SEL_SHIFT		3
+	#define SPEAR1310_I2S_REF_SEL_MASK		1
+	#define SPEAR1310_I2S_REF_SHIFT			2
+	#define SPEAR1310_I2S_SRC_CLK_MASK		2
+	#define SPEAR1310_I2S_SRC_CLK_SHIFT		0
+
+#define SPEAR1310_C3_CLK_SYNT			(VA_MISC_BASE + 0x250)
+#define SPEAR1310_UART_CLK_SYNT			(VA_MISC_BASE + 0x254)
+#define SPEAR1310_GMAC_CLK_SYNT			(VA_MISC_BASE + 0x258)
+#define SPEAR1310_SDHCI_CLK_SYNT		(VA_MISC_BASE + 0x25C)
+#define SPEAR1310_CFXD_CLK_SYNT			(VA_MISC_BASE + 0x260)
+#define SPEAR1310_ADC_CLK_SYNT			(VA_MISC_BASE + 0x264)
+#define SPEAR1310_AMBA_CLK_SYNT			(VA_MISC_BASE + 0x268)
+#define SPEAR1310_CLCD_CLK_SYNT			(VA_MISC_BASE + 0x270)
+#define SPEAR1310_RAS_CLK_SYNT0			(VA_MISC_BASE + 0x280)
+#define SPEAR1310_RAS_CLK_SYNT1			(VA_MISC_BASE + 0x288)
+#define SPEAR1310_RAS_CLK_SYNT2			(VA_MISC_BASE + 0x290)
+#define SPEAR1310_RAS_CLK_SYNT3			(VA_MISC_BASE + 0x298)
+	/* Check Fractional synthesizer reg masks */
+
+#define SPEAR1310_PERIP1_CLK_ENB		(VA_MISC_BASE + 0x300)
+	/* PERIP1_CLK_ENB register masks */
+	#define SPEAR1310_RTC_CLK_ENB			31
+	#define SPEAR1310_ADC_CLK_ENB			30
+	#define SPEAR1310_C3_CLK_ENB			29
+	#define SPEAR1310_JPEG_CLK_ENB			28
+	#define SPEAR1310_CLCD_CLK_ENB			27
+	#define SPEAR1310_DMA_CLK_ENB			25
+	#define SPEAR1310_GPIO1_CLK_ENB			24
+	#define SPEAR1310_GPIO0_CLK_ENB			23
+	#define SPEAR1310_GPT1_CLK_ENB			22
+	#define SPEAR1310_GPT0_CLK_ENB			21
+	#define SPEAR1310_I2S0_CLK_ENB			20
+	#define SPEAR1310_I2S1_CLK_ENB			19
+	#define SPEAR1310_I2C0_CLK_ENB			18
+	#define SPEAR1310_SSP_CLK_ENB			17
+	#define SPEAR1310_UART_CLK_ENB			15
+	#define SPEAR1310_PCIE_SATA_2_CLK_ENB		14
+	#define SPEAR1310_PCIE_SATA_1_CLK_ENB		13
+	#define SPEAR1310_PCIE_SATA_0_CLK_ENB		12
+	#define SPEAR1310_UOC_CLK_ENB			11
+	#define SPEAR1310_UHC1_CLK_ENB			10
+	#define SPEAR1310_UHC0_CLK_ENB			9
+	#define SPEAR1310_GMAC_CLK_ENB			8
+	#define SPEAR1310_CFXD_CLK_ENB			7
+	#define SPEAR1310_SDHCI_CLK_ENB			6
+	#define SPEAR1310_SMI_CLK_ENB			5
+	#define SPEAR1310_FSMC_CLK_ENB			4
+	#define SPEAR1310_SYSRAM0_CLK_ENB		3
+	#define SPEAR1310_SYSRAM1_CLK_ENB		2
+	#define SPEAR1310_SYSROM_CLK_ENB		1
+	#define SPEAR1310_BUS_CLK_ENB			0
+
+#define SPEAR1310_PERIP2_CLK_ENB		(VA_MISC_BASE + 0x304)
+	/* PERIP2_CLK_ENB register masks */
+	#define SPEAR1310_THSENS_CLK_ENB		8
+	#define SPEAR1310_I2S_REF_PAD_CLK_ENB		7
+	#define SPEAR1310_ACP_CLK_ENB			6
+	#define SPEAR1310_GPT3_CLK_ENB			5
+	#define SPEAR1310_GPT2_CLK_ENB			4
+	#define SPEAR1310_KBD_CLK_ENB			3
+	#define SPEAR1310_CPU_DBG_CLK_ENB		2
+	#define SPEAR1310_DDR_CORE_CLK_ENB		1
+	#define SPEAR1310_DDR_CTRL_CLK_ENB		0
+
+#define SPEAR1310_RAS_CLK_ENB			(VA_MISC_BASE + 0x310)
+	/* RAS_CLK_ENB register masks */
+	#define SPEAR1310_SYNT3_CLK_ENB			17
+	#define SPEAR1310_SYNT2_CLK_ENB			16
+	#define SPEAR1310_SYNT1_CLK_ENB			15
+	#define SPEAR1310_SYNT0_CLK_ENB			14
+	#define SPEAR1310_PCLK3_CLK_ENB			13
+	#define SPEAR1310_PCLK2_CLK_ENB			12
+	#define SPEAR1310_PCLK1_CLK_ENB			11
+	#define SPEAR1310_PCLK0_CLK_ENB			10
+	#define SPEAR1310_PLL3_CLK_ENB			9
+	#define SPEAR1310_PLL2_CLK_ENB			8
+	#define SPEAR1310_C125M_PAD_CLK_ENB		7
+	#define SPEAR1310_C30M_CLK_ENB			6
+	#define SPEAR1310_C48M_CLK_ENB			5
+	#define SPEAR1310_OSC_25M_CLK_ENB		4
+	#define SPEAR1310_OSC_32K_CLK_ENB		3
+	#define SPEAR1310_OSC_24M_CLK_ENB		2
+	#define SPEAR1310_PCLK_CLK_ENB			1
+	#define SPEAR1310_ACLK_CLK_ENB			0
+
+/* RAS Area Control Register */
+#define SPEAR1310_RAS_CTRL_REG0			(VA_SPEAR1310_RAS_BASE + 0x000)
+	#define SPEAR1310_SSP1_CLK_MASK			3
+	#define SPEAR1310_SSP1_CLK_SHIFT		26
+	#define SPEAR1310_TDM_CLK_MASK			1
+	#define SPEAR1310_TDM2_CLK_SHIFT		24
+	#define SPEAR1310_TDM1_CLK_SHIFT		23
+	#define SPEAR1310_I2C_CLK_MASK			1
+	#define SPEAR1310_I2C7_CLK_SHIFT		22
+	#define SPEAR1310_I2C6_CLK_SHIFT		21
+	#define SPEAR1310_I2C5_CLK_SHIFT		20
+	#define SPEAR1310_I2C4_CLK_SHIFT		19
+	#define SPEAR1310_I2C3_CLK_SHIFT		18
+	#define SPEAR1310_I2C2_CLK_SHIFT		17
+	#define SPEAR1310_I2C1_CLK_SHIFT		16
+	#define SPEAR1310_GPT64_CLK_MASK		1
+	#define SPEAR1310_GPT64_CLK_SHIFT		15
+	#define SPEAR1310_RAS_UART_CLK_MASK		1
+	#define SPEAR1310_UART5_CLK_SHIFT		14
+	#define SPEAR1310_UART4_CLK_SHIFT		13
+	#define SPEAR1310_UART3_CLK_SHIFT		12
+	#define SPEAR1310_UART2_CLK_SHIFT		11
+	#define SPEAR1310_UART1_CLK_SHIFT		10
+	#define SPEAR1310_PCI_CLK_MASK			1
+	#define SPEAR1310_PCI_CLK_SHIFT			0
+
+#define SPEAR1310_RAS_CTRL_REG1			(VA_SPEAR1310_RAS_BASE + 0x004)
+	#define SPEAR1310_PHY_CLK_MASK			0x3
+	#define SPEAR1310_RMII_PHY_CLK_SHIFT		0
+	#define SPEAR1310_SMII_RGMII_PHY_CLK_SHIFT	2
+
+#define SPEAR1310_RAS_SW_CLK_CTRL		(VA_SPEAR1310_RAS_BASE + 0x0148)
+	#define SPEAR1310_CAN1_CLK_ENB			25
+	#define SPEAR1310_CAN0_CLK_ENB			24
+	#define SPEAR1310_GPT64_CLK_ENB			23
+	#define SPEAR1310_SSP1_CLK_ENB			22
+	#define SPEAR1310_I2C7_CLK_ENB			21
+	#define SPEAR1310_I2C6_CLK_ENB			20
+	#define SPEAR1310_I2C5_CLK_ENB			19
+	#define SPEAR1310_I2C4_CLK_ENB			18
+	#define SPEAR1310_I2C3_CLK_ENB			17
+	#define SPEAR1310_I2C2_CLK_ENB			16
+	#define SPEAR1310_I2C1_CLK_ENB			15
+	#define SPEAR1310_UART5_CLK_ENB			14
+	#define SPEAR1310_UART4_CLK_ENB			13
+	#define SPEAR1310_UART3_CLK_ENB			12
+	#define SPEAR1310_UART2_CLK_ENB			11
+	#define SPEAR1310_UART1_CLK_ENB			10
+	#define SPEAR1310_RS485_1_CLK_ENB		9
+	#define SPEAR1310_RS485_0_CLK_ENB		8
+	#define SPEAR1310_TDM2_CLK_ENB			7
+	#define SPEAR1310_TDM1_CLK_ENB			6
+	#define SPEAR1310_PCI_CLK_ENB			5
+	#define SPEAR1310_GMII_CLK_ENB			4
+	#define SPEAR1310_MII2_CLK_ENB			3
+	#define SPEAR1310_MII1_CLK_ENB			2
+	#define SPEAR1310_MII0_CLK_ENB			1
+	#define SPEAR1310_ESRAM_CLK_ENB			0
+
+static DEFINE_SPINLOCK(_lock);
+
+/* pll rate configuration table, in ascending order of rates */
+static struct pll_rate_tbl pll_rtbl[] = {
+	/* PCLK 24MHz */
+	{.mode = 0, .m = 0x83, .n = 0x04, .p = 0x5}, /* vco 1572, pll 49.125 MHz */
+	{.mode = 0, .m = 0x7D, .n = 0x06, .p = 0x3}, /* vco 1000, pll 125 MHz */
+	{.mode = 0, .m = 0x64, .n = 0x06, .p = 0x1}, /* vco 800, pll 400 MHz */
+	{.mode = 0, .m = 0x7D, .n = 0x06, .p = 0x1}, /* vco 1000, pll 500 MHz */
+	{.mode = 0, .m = 0xA6, .n = 0x06, .p = 0x1}, /* vco 1328, pll 664 MHz */
+	{.mode = 0, .m = 0xC8, .n = 0x06, .p = 0x1}, /* vco 1600, pll 800 MHz */
+	{.mode = 0, .m = 0x7D, .n = 0x06, .p = 0x0}, /* vco 1, pll 1 GHz */
+};
+
+/* vco-pll4 rate configuration table, in ascending order of rates */
+static struct pll_rate_tbl pll4_rtbl[] = {
+	{.mode = 0, .m = 0x7D, .n = 0x06, .p = 0x2}, /* vco 1000, pll 250 MHz */
+	{.mode = 0, .m = 0xA6, .n = 0x06, .p = 0x2}, /* vco 1328, pll 332 MHz */
+	{.mode = 0, .m = 0xC8, .n = 0x06, .p = 0x2}, /* vco 1600, pll 400 MHz */
+	{.mode = 0, .m = 0x7D, .n = 0x06, .p = 0x0}, /* vco 1, pll 1 GHz */
+};
+
+/* aux rate configuration table, in ascending order of rates */
+static struct aux_rate_tbl aux_rtbl[] = {
+	/* For VCO1div2 = 500 MHz */
+	{.xscale = 10, .yscale = 204, .eq = 0}, /* 12.29 MHz */
+	{.xscale = 4, .yscale = 21, .eq = 0}, /* 48 MHz */
+	{.xscale = 2, .yscale = 6, .eq = 0}, /* 83 MHz */
+	{.xscale = 2, .yscale = 4, .eq = 0}, /* 125 MHz */
+	{.xscale = 1, .yscale = 3, .eq = 1}, /* 166 MHz */
+	{.xscale = 1, .yscale = 2, .eq = 1}, /* 250 MHz */
+};
+
+/* gmac rate configuration table, in ascending order of rates */
+static struct aux_rate_tbl gmac_rtbl[] = {
+	/* For gmac phy input clk */
+	{.xscale = 2, .yscale = 6, .eq = 0}, /* divided by 6 */
+	{.xscale = 2, .yscale = 4, .eq = 0}, /* divided by 4 */
+	{.xscale = 1, .yscale = 3, .eq = 1}, /* divided by 3 */
+	{.xscale = 1, .yscale = 2, .eq = 1}, /* divided by 2 */
+};
+
+/* clcd rate configuration table, in ascending order of rates */
+static struct frac_rate_tbl clcd_rtbl[] = {
+	{.div = 0x14000}, /* 25 Mhz , for vc01div4 = 250 MHz*/
+	{.div = 0x1284B}, /* 27 Mhz , for vc01div4 = 250 MHz*/
+	{.div = 0x0D8D3}, /* 58 Mhz , for vco1div4 = 393 MHz */
+	{.div = 0x0B72C}, /* 58 Mhz , for vco1div4 = 332 MHz */
+	{.div = 0x089EE}, /* 58 Mhz , for vc01div4 = 250 MHz*/
+	{.div = 0x06f1C}, /* 72 Mhz , for vc01div4 = 250 MHz*/
+	{.div = 0x06E58}, /* 58 Mhz , for vco1div4 = 200 MHz */
+	{.div = 0x06c1B}, /* 74 Mhz , for vc01div4 = 250 MHz*/
+	{.div = 0x04A12}, /* 108 Mhz , for vc01div4 = 250 MHz*/
+	{.div = 0x0378E}, /* 144 Mhz , for vc01div4 = 250 MHz*/
+};
+
+/* i2s prescaler1 masks */
+static struct aux_clk_masks i2s_prs1_masks = {
+	.eq_sel_mask = AUX_EQ_SEL_MASK,
+	.eq_sel_shift = SPEAR1310_I2S_PRS1_EQ_SEL_SHIFT,
+	.eq1_mask = AUX_EQ1_SEL,
+	.eq2_mask = AUX_EQ2_SEL,
+	.xscale_sel_mask = SPEAR1310_I2S_PRS1_CLK_X_MASK,
+	.xscale_sel_shift = SPEAR1310_I2S_PRS1_CLK_X_SHIFT,
+	.yscale_sel_mask = SPEAR1310_I2S_PRS1_CLK_Y_MASK,
+	.yscale_sel_shift = SPEAR1310_I2S_PRS1_CLK_Y_SHIFT,
+};
+
+/* i2s sclk (bit clock) syynthesizers masks */
+static struct aux_clk_masks i2s_sclk_masks = {
+	.eq_sel_mask = AUX_EQ_SEL_MASK,
+	.eq_sel_shift = SPEAR1310_I2S_SCLK_EQ_SEL_SHIFT,
+	.eq1_mask = AUX_EQ1_SEL,
+	.eq2_mask = AUX_EQ2_SEL,
+	.xscale_sel_mask = SPEAR1310_I2S_SCLK_X_MASK,
+	.xscale_sel_shift = SPEAR1310_I2S_SCLK_X_SHIFT,
+	.yscale_sel_mask = SPEAR1310_I2S_SCLK_Y_MASK,
+	.yscale_sel_shift = SPEAR1310_I2S_SCLK_Y_SHIFT,
+	.enable_bit = SPEAR1310_I2S_SCLK_SYNTH_ENB,
+};
+
+/* i2s prs1 aux rate configuration table, in ascending order of rates */
+static struct aux_rate_tbl i2s_prs1_rtbl[] = {
+	/* For parent clk = 49.152 MHz */
+	{.xscale = 1, .yscale = 2, .eq = 0}, /* 12.288 MHz */
+};
+
+/* i2s sclk aux rate configuration table, in ascending order of rates */
+static struct aux_rate_tbl i2s_sclk_rtbl[] = {
+	/* For i2s_ref_clk = 12.288MHz */
+	{.xscale = 1, .yscale = 4, .eq = 0}, /* 1.53 MHz */
+	{.xscale = 1, .yscale = 2, .eq = 0}, /* 3.07 Mhz */
+};
+
+/* adc rate configuration table, in ascending order of rates */
+/* possible adc range is 2.5 MHz to 20 MHz. */
+static struct aux_rate_tbl adc_rtbl[] = {
+	/* For ahb = 166.67 MHz */
+	{.xscale = 1, .yscale = 31, .eq = 0}, /* 2.68 MHz */
+	{.xscale = 2, .yscale = 21, .eq = 0}, /* 7.94 MHz */
+	{.xscale = 4, .yscale = 21, .eq = 0}, /* 15.87 MHz */
+	{.xscale = 10, .yscale = 42, .eq = 0}, /* 19.84 MHz */
+};
+
+/* General synth rate configuration table, in ascending order of rates */
+static struct frac_rate_tbl gen_rtbl[] = {
+	/* For vco1div4 = 250 MHz */
+	{.div = 0x14000}, /* 25 MHz */
+	{.div = 0x0A000}, /* 50 MHz */
+	{.div = 0x05000}, /* 100 MHz */
+	{.div = 0x02000}, /* 250 MHz */
+};
+
+/* clock parents */
+static const char *vco_parents[] = { "osc_24m_clk", "osc_25m_clk", };
+static const char *gpt_parents[] = { "osc_24m_clk", "apb_clk", };
+static const char *uart0_parents[] = { "pll5_clk", "uart_synth_gate_clk", };
+static const char *c3_parents[] = { "pll5_clk", "c3_synth_gate_clk", };
+static const char *gmac_phy_input_parents[] = { "gmii_125m_pad_clk", "pll2_clk",
+	"osc_25m_clk", };
+static const char *gmac_phy_parents[] = { "gmac_phy_input_mux_clk",
+	"gmac_phy_synth_gate_clk", };
+static const char *clcd_synth_parents[] = { "vco1div4_clk", "pll2_clk", };
+static const char *clcd_pixel_parents[] = { "pll5_clk", "clcd_synth_clk", };
+static const char *i2s_src_parents[] = { "vco1div2_clk", "none", "pll3_clk",
+	"i2s_src_pad_clk", };
+static const char *i2s_ref_parents[] = { "i2s_src_mux_clk", "i2s_prs1_clk", };
+static const char *gen_synth0_1_parents[] = { "vco1div4_clk", "vco3div2_clk",
+	"pll3_clk", };
+static const char *gen_synth2_3_parents[] = { "vco1div4_clk", "vco3div2_clk",
+	"pll2_clk", };
+static const char *rmii_phy_parents[] = { "ras_tx50_clk", "none",
+	"ras_pll2_clk", "ras_synth0_clk", };
+static const char *smii_rgmii_phy_parents[] = { "none", "ras_tx125_clk",
+	"ras_pll2_clk", "ras_synth0_clk", };
+static const char *uart_parents[] = { "ras_apb_clk", "gen_synth3_clk", };
+static const char *i2c_parents[] = { "ras_apb_clk", "gen_synth1_clk", };
+static const char *ssp1_parents[] = { "ras_apb_clk", "gen_synth1_clk",
+	"ras_plclk0_clk", };
+static const char *pci_parents[] = { "ras_pll3_clk", "gen_synth2_clk", };
+static const char *tdm_parents[] = { "ras_pll3_clk", "gen_synth1_clk", };
+
+void __init spear1310_clk_init(void)
+{
+	struct clk *clk, *clk1;
+
+	clk = clk_register_fixed_rate(NULL, "apb_pclk", NULL, CLK_IS_ROOT, 0);
+	clk_register_clkdev(clk, "apb_pclk", NULL);
+
+	clk = clk_register_fixed_rate(NULL, "osc_32k_clk", NULL, CLK_IS_ROOT,
+			32000);
+	clk_register_clkdev(clk, "osc_32k_clk", NULL);
+
+	clk = clk_register_fixed_rate(NULL, "osc_24m_clk", NULL, CLK_IS_ROOT,
+			24000000);
+	clk_register_clkdev(clk, "osc_24m_clk", NULL);
+
+	clk = clk_register_fixed_rate(NULL, "osc_25m_clk", NULL, CLK_IS_ROOT,
+			25000000);
+	clk_register_clkdev(clk, "osc_25m_clk", NULL);
+
+	clk = clk_register_fixed_rate(NULL, "gmii_125m_pad_clk", NULL,
+			CLK_IS_ROOT, 125000000);
+	clk_register_clkdev(clk, "gmii_125m_pad_clk", NULL);
+
+	clk = clk_register_fixed_rate(NULL, "i2s_src_pad_clk", NULL,
+			CLK_IS_ROOT, 12288000);
+	clk_register_clkdev(clk, "i2s_src_pad_clk", NULL);
+
+	/* clock derived from 32 KHz osc clk */
+	clk = clk_register_gate(NULL, "rtc-spear", "osc_32k_clk", 0,
+			SPEAR1310_PERIP1_CLK_ENB, SPEAR1310_RTC_CLK_ENB, 0,
+			&_lock);
+	clk_register_clkdev(clk, NULL, "fc900000.rtc");
+
+	/* clock derived from 24 or 25 MHz osc clk */
+	/* vco-pll */
+	clk = clk_register_mux(NULL, "vco1_mux_clk", vco_parents,
+			ARRAY_SIZE(vco_parents), 0, SPEAR1310_PLL_CFG,
+			SPEAR1310_PLL1_CLK_SHIFT, SPEAR1310_PLL_CLK_MASK, 0,
+			&_lock);
+	clk_register_clkdev(clk, "vco1_mux_clk", NULL);
+	clk = clk_register_vco_pll("vco1_clk", "pll1_clk", NULL, "vco1_mux_clk",
+			0, SPEAR1310_PLL1_CTR, SPEAR1310_PLL1_FRQ, pll_rtbl,
+			ARRAY_SIZE(pll_rtbl), &_lock, &clk1, NULL);
+	clk_register_clkdev(clk, "vco1_clk", NULL);
+	clk_register_clkdev(clk1, "pll1_clk", NULL);
+
+	clk = clk_register_mux(NULL, "vco2_mux_clk", vco_parents,
+			ARRAY_SIZE(vco_parents), 0, SPEAR1310_PLL_CFG,
+			SPEAR1310_PLL2_CLK_SHIFT, SPEAR1310_PLL_CLK_MASK, 0,
+			&_lock);
+	clk_register_clkdev(clk, "vco2_mux_clk", NULL);
+	clk = clk_register_vco_pll("vco2_clk", "pll2_clk", NULL, "vco2_mux_clk",
+			0, SPEAR1310_PLL2_CTR, SPEAR1310_PLL2_FRQ, pll_rtbl,
+			ARRAY_SIZE(pll_rtbl), &_lock, &clk1, NULL);
+	clk_register_clkdev(clk, "vco2_clk", NULL);
+	clk_register_clkdev(clk1, "pll2_clk", NULL);
+
+	clk = clk_register_mux(NULL, "vco3_mux_clk", vco_parents,
+			ARRAY_SIZE(vco_parents), 0, SPEAR1310_PLL_CFG,
+			SPEAR1310_PLL3_CLK_SHIFT, SPEAR1310_PLL_CLK_MASK, 0,
+			&_lock);
+	clk_register_clkdev(clk, "vco3_mux_clk", NULL);
+	clk = clk_register_vco_pll("vco3_clk", "pll3_clk", NULL, "vco3_mux_clk",
+			0, SPEAR1310_PLL3_CTR, SPEAR1310_PLL3_FRQ, pll_rtbl,
+			ARRAY_SIZE(pll_rtbl), &_lock, &clk1, NULL);
+	clk_register_clkdev(clk, "vco3_clk", NULL);
+	clk_register_clkdev(clk1, "pll3_clk", NULL);
+
+	clk = clk_register_vco_pll("vco4_clk", "pll4_clk", NULL, "osc_24m_clk",
+			0, SPEAR1310_PLL4_CTR, SPEAR1310_PLL4_FRQ, pll4_rtbl,
+			ARRAY_SIZE(pll4_rtbl), &_lock, &clk1, NULL);
+	clk_register_clkdev(clk, "vco4_clk", NULL);
+	clk_register_clkdev(clk1, "pll4_clk", NULL);
+
+	clk = clk_register_fixed_rate(NULL, "pll5_clk", "osc_24m_clk", 0,
+			48000000);
+	clk_register_clkdev(clk, "pll5_clk", NULL);
+
+	clk = clk_register_fixed_rate(NULL, "pll6_clk", "osc_25m_clk", 0,
+			25000000);
+	clk_register_clkdev(clk, "pll6_clk", NULL);
+
+	/* vco div n clocks */
+	clk = clk_register_fixed_factor(NULL, "vco1div2_clk", "vco1_clk", 0, 1,
+			2);
+	clk_register_clkdev(clk, "vco1div2_clk", NULL);
+
+	clk = clk_register_fixed_factor(NULL, "vco1div4_clk", "vco1_clk", 0, 1,
+			4);
+	clk_register_clkdev(clk, "vco1div4_clk", NULL);
+
+	clk = clk_register_fixed_factor(NULL, "vco2div2_clk", "vco2_clk", 0, 1,
+			2);
+	clk_register_clkdev(clk, "vco2div2_clk", NULL);
+
+	clk = clk_register_fixed_factor(NULL, "vco3div2_clk", "vco3_clk", 0, 1,
+			2);
+	clk_register_clkdev(clk, "vco3div2_clk", NULL);
+
+	/* peripherals */
+	clk_register_fixed_factor(NULL, "thermal_clk", "osc_24m_clk", 0, 1,
+			128);
+	clk = clk_register_gate(NULL, "thermal_gate_clk", "thermal_clk", 0,
+			SPEAR1310_PERIP2_CLK_ENB, SPEAR1310_THSENS_CLK_ENB, 0,
+			&_lock);
+	clk_register_clkdev(clk, NULL, "spear_thermal");
+
+	/* clock derived from pll4 clk */
+	clk = clk_register_fixed_factor(NULL, "ddr_clk", "pll4_clk", 0, 1,
+			1);
+	clk_register_clkdev(clk, "ddr_clk", NULL);
+
+	/* clock derived from pll1 clk */
+	clk = clk_register_fixed_factor(NULL, "cpu_clk", "pll1_clk", 0, 1, 2);
+	clk_register_clkdev(clk, "cpu_clk", NULL);
+
+	clk = clk_register_fixed_factor(NULL, "wdt_clk", "cpu_clk", 0, 1,
+			2);
+	clk_register_clkdev(clk, NULL, "ec800620.wdt");
+
+	clk = clk_register_fixed_factor(NULL, "ahb_clk", "pll1_clk", 0, 1,
+			6);
+	clk_register_clkdev(clk, "ahb_clk", NULL);
+
+	clk = clk_register_fixed_factor(NULL, "apb_clk", "pll1_clk", 0, 1,
+			12);
+	clk_register_clkdev(clk, "apb_clk", NULL);
+
+	/* gpt clocks */
+	clk = clk_register_mux(NULL, "gpt0_mux_clk", gpt_parents,
+			ARRAY_SIZE(gpt_parents), 0, SPEAR1310_PERIP_CLK_CFG,
+			SPEAR1310_GPT0_CLK_SHIFT, SPEAR1310_GPT_CLK_MASK, 0,
+			&_lock);
+	clk_register_clkdev(clk, "gpt0_mux_clk", NULL);
+	clk = clk_register_gate(NULL, "gpt0_clk", "gpt0_mux_clk", 0,
+			SPEAR1310_PERIP1_CLK_ENB, SPEAR1310_GPT0_CLK_ENB, 0,
+			&_lock);
+	clk_register_clkdev(clk, NULL, "gpt0");
+
+	clk = clk_register_mux(NULL, "gpt1_mux_clk", gpt_parents,
+			ARRAY_SIZE(gpt_parents), 0, SPEAR1310_PERIP_CLK_CFG,
+			SPEAR1310_GPT1_CLK_SHIFT, SPEAR1310_GPT_CLK_MASK, 0,
+			&_lock);
+	clk_register_clkdev(clk, "gpt1_mux_clk", NULL);
+	clk = clk_register_gate(NULL, "gpt1_clk", "gpt1_mux_clk", 0,
+			SPEAR1310_PERIP1_CLK_ENB, SPEAR1310_GPT1_CLK_ENB, 0,
+			&_lock);
+	clk_register_clkdev(clk, NULL, "gpt1");
+
+	clk = clk_register_mux(NULL, "gpt2_mux_clk", gpt_parents,
+			ARRAY_SIZE(gpt_parents), 0, SPEAR1310_PERIP_CLK_CFG,
+			SPEAR1310_GPT2_CLK_SHIFT, SPEAR1310_GPT_CLK_MASK, 0,
+			&_lock);
+	clk_register_clkdev(clk, "gpt2_mux_clk", NULL);
+	clk = clk_register_gate(NULL, "gpt2_clk", "gpt2_mux_clk", 0,
+			SPEAR1310_PERIP2_CLK_ENB, SPEAR1310_GPT2_CLK_ENB, 0,
+			&_lock);
+	clk_register_clkdev(clk, NULL, "gpt2");
+
+	clk = clk_register_mux(NULL, "gpt3_mux_clk", gpt_parents,
+			ARRAY_SIZE(gpt_parents), 0, SPEAR1310_PERIP_CLK_CFG,
+			SPEAR1310_GPT3_CLK_SHIFT, SPEAR1310_GPT_CLK_MASK, 0,
+			&_lock);
+	clk_register_clkdev(clk, "gpt3_mux_clk", NULL);
+	clk = clk_register_gate(NULL, "gpt3_clk", "gpt3_mux_clk", 0,
+			SPEAR1310_PERIP2_CLK_ENB, SPEAR1310_GPT3_CLK_ENB, 0,
+			&_lock);
+	clk_register_clkdev(clk, NULL, "gpt3");
+
+	/* others */
+	clk = clk_register_aux("uart_synth_clk", "uart_synth_gate_clk",
+			"vco1div2_clk", 0, SPEAR1310_UART_CLK_SYNT, NULL,
+			aux_rtbl, ARRAY_SIZE(aux_rtbl), &_lock, &clk1);
+	clk_register_clkdev(clk, "uart_synth_clk", NULL);
+	clk_register_clkdev(clk1, "uart_synth_gate_clk", NULL);
+
+	clk = clk_register_mux(NULL, "uart0_mux_clk", uart0_parents,
+			ARRAY_SIZE(uart0_parents), 0, SPEAR1310_PERIP_CLK_CFG,
+			SPEAR1310_UART_CLK_SHIFT, SPEAR1310_UART_CLK_MASK, 0,
+			&_lock);
+	clk_register_clkdev(clk, "uart0_mux_clk", NULL);
+
+	clk = clk_register_gate(NULL, "uart0_clk", "uart0_mux_clk", 0,
+			SPEAR1310_PERIP1_CLK_ENB, SPEAR1310_UART_CLK_ENB, 0,
+			&_lock);
+	clk_register_clkdev(clk, NULL, "e0000000.serial");
+
+	clk = clk_register_aux("sdhci_synth_clk", "sdhci_synth_gate_clk",
+			"vco1div2_clk", 0, SPEAR1310_SDHCI_CLK_SYNT, NULL,
+			aux_rtbl, ARRAY_SIZE(aux_rtbl), &_lock, &clk1);
+	clk_register_clkdev(clk, "sdhci_synth_clk", NULL);
+	clk_register_clkdev(clk1, "sdhci_synth_gate_clk", NULL);
+
+	clk = clk_register_gate(NULL, "sdhci_clk", "sdhci_synth_gate_clk", 0,
+			SPEAR1310_PERIP1_CLK_ENB, SPEAR1310_SDHCI_CLK_ENB, 0,
+			&_lock);
+	clk_register_clkdev(clk, NULL, "b3000000.sdhci");
+
+	clk = clk_register_aux("cfxd_synth_clk", "cfxd_synth_gate_clk",
+			"vco1div2_clk", 0, SPEAR1310_CFXD_CLK_SYNT, NULL,
+			aux_rtbl, ARRAY_SIZE(aux_rtbl), &_lock, &clk1);
+	clk_register_clkdev(clk, "cfxd_synth_clk", NULL);
+	clk_register_clkdev(clk1, "cfxd_synth_gate_clk", NULL);
+
+	clk = clk_register_gate(NULL, "cfxd_clk", "cfxd_synth_gate_clk", 0,
+			SPEAR1310_PERIP1_CLK_ENB, SPEAR1310_CFXD_CLK_ENB, 0,
+			&_lock);
+	clk_register_clkdev(clk, NULL, "b2800000.cf");
+	clk_register_clkdev(clk, NULL, "arasan_xd");
+
+	clk = clk_register_aux("c3_synth_clk", "c3_synth_gate_clk",
+			"vco1div2_clk", 0, SPEAR1310_C3_CLK_SYNT, NULL,
+			aux_rtbl, ARRAY_SIZE(aux_rtbl), &_lock, &clk1);
+	clk_register_clkdev(clk, "c3_synth_clk", NULL);
+	clk_register_clkdev(clk1, "c3_synth_gate_clk", NULL);
+
+	clk = clk_register_mux(NULL, "c3_mux_clk", c3_parents,
+			ARRAY_SIZE(c3_parents), 0, SPEAR1310_PERIP_CLK_CFG,
+			SPEAR1310_C3_CLK_SHIFT, SPEAR1310_C3_CLK_MASK, 0,
+			&_lock);
+	clk_register_clkdev(clk, "c3_mux_clk", NULL);
+
+	clk = clk_register_gate(NULL, "c3_clk", "c3_mux_clk", 0,
+			SPEAR1310_PERIP1_CLK_ENB, SPEAR1310_C3_CLK_ENB, 0,
+			&_lock);
+	clk_register_clkdev(clk, NULL, "c3");
+
+	/* gmac */
+	clk = clk_register_mux(NULL, "gmac_phy_input_mux_clk",
+			gmac_phy_input_parents,
+			ARRAY_SIZE(gmac_phy_input_parents), 0,
+			SPEAR1310_GMAC_CLK_CFG,
+			SPEAR1310_GMAC_PHY_INPUT_CLK_SHIFT,
+			SPEAR1310_GMAC_PHY_INPUT_CLK_MASK, 0, &_lock);
+	clk_register_clkdev(clk, "gmac_phy_input_mux_clk", NULL);
+
+	clk = clk_register_aux("gmac_phy_synth_clk", "gmac_phy_synth_gate_clk",
+			"gmac_phy_input_mux_clk", 0, SPEAR1310_GMAC_CLK_SYNT,
+			NULL, gmac_rtbl, ARRAY_SIZE(gmac_rtbl), &_lock, &clk1);
+	clk_register_clkdev(clk, "gmac_phy_synth_clk", NULL);
+	clk_register_clkdev(clk1, "gmac_phy_synth_gate_clk", NULL);
+
+	clk = clk_register_mux(NULL, "gmac_phy_mux_clk", gmac_phy_parents,
+			ARRAY_SIZE(gmac_phy_parents), 0,
+			SPEAR1310_PERIP_CLK_CFG, SPEAR1310_GMAC_PHY_CLK_SHIFT,
+			SPEAR1310_GMAC_PHY_CLK_MASK, 0, &_lock);
+	clk_register_clkdev(clk, NULL, "stmmacphy.0");
+
+	/* clcd */
+	clk = clk_register_mux(NULL, "clcd_synth_mux_clk", clcd_synth_parents,
+			ARRAY_SIZE(clcd_synth_parents), 0,
+			SPEAR1310_CLCD_CLK_SYNT, SPEAR1310_CLCD_SYNT_CLK_SHIFT,
+			SPEAR1310_CLCD_SYNT_CLK_MASK, 0, &_lock);
+	clk_register_clkdev(clk, "clcd_synth_mux_clk", NULL);
+
+	clk = clk_register_frac("clcd_synth_clk", "clcd_synth_mux_clk", 0,
+			SPEAR1310_CLCD_CLK_SYNT, clcd_rtbl,
+			ARRAY_SIZE(clcd_rtbl), &_lock);
+	clk_register_clkdev(clk, "clcd_synth_clk", NULL);
+
+	clk = clk_register_mux(NULL, "clcd_pixel_mux_clk", clcd_pixel_parents,
+			ARRAY_SIZE(clcd_pixel_parents), 0,
+			SPEAR1310_PERIP_CLK_CFG, SPEAR1310_CLCD_CLK_SHIFT,
+			SPEAR1310_CLCD_CLK_MASK, 0, &_lock);
+	clk_register_clkdev(clk, "clcd_pixel_clk", NULL);
+
+	clk = clk_register_gate(NULL, "clcd_clk", "clcd_pixel_mux_clk", 0,
+			SPEAR1310_PERIP1_CLK_ENB, SPEAR1310_CLCD_CLK_ENB, 0,
+			&_lock);
+	clk_register_clkdev(clk, "clcd_clk", NULL);
+
+	/* i2s */
+	clk = clk_register_mux(NULL, "i2s_src_mux_clk", i2s_src_parents,
+			ARRAY_SIZE(i2s_src_parents), 0, SPEAR1310_I2S_CLK_CFG,
+			SPEAR1310_I2S_SRC_CLK_SHIFT, SPEAR1310_I2S_SRC_CLK_MASK,
+			0, &_lock);
+	clk_register_clkdev(clk, "i2s_src_clk", NULL);
+
+	clk = clk_register_aux("i2s_prs1_clk", NULL, "i2s_src_mux_clk", 0,
+			SPEAR1310_I2S_CLK_CFG, &i2s_prs1_masks, i2s_prs1_rtbl,
+			ARRAY_SIZE(i2s_prs1_rtbl), &_lock, NULL);
+	clk_register_clkdev(clk, "i2s_prs1_clk", NULL);
+
+	clk = clk_register_mux(NULL, "i2s_ref_mux_clk", i2s_ref_parents,
+			ARRAY_SIZE(i2s_ref_parents), 0, SPEAR1310_I2S_CLK_CFG,
+			SPEAR1310_I2S_REF_SHIFT, SPEAR1310_I2S_REF_SEL_MASK, 0,
+			&_lock);
+	clk_register_clkdev(clk, "i2s_ref_clk", NULL);
+
+	clk = clk_register_gate(NULL, "i2s_ref_pad_clk", "i2s_ref_mux_clk", 0,
+			SPEAR1310_PERIP2_CLK_ENB, SPEAR1310_I2S_REF_PAD_CLK_ENB,
+			0, &_lock);
+	clk_register_clkdev(clk, "i2s_ref_pad_clk", NULL);
+
+	clk = clk_register_aux("i2s_sclk_clk", "i2s_sclk_gate_clk",
+			"i2s_ref_pad_clk", 0, SPEAR1310_I2S_CLK_CFG,
+			&i2s_sclk_masks, i2s_sclk_rtbl,
+			ARRAY_SIZE(i2s_sclk_rtbl), &_lock, &clk1);
+	clk_register_clkdev(clk, "i2s_sclk_clk", NULL);
+	clk_register_clkdev(clk1, "i2s_sclk_gate_clk", NULL);
+
+	/* clock derived from ahb clk */
+	clk = clk_register_gate(NULL, "i2c0_clk", "ahb_clk", 0,
+			SPEAR1310_PERIP1_CLK_ENB, SPEAR1310_I2C0_CLK_ENB, 0,
+			&_lock);
+	clk_register_clkdev(clk, NULL, "e0280000.i2c");
+
+	clk = clk_register_gate(NULL, "dma_clk", "ahb_clk", 0,
+			SPEAR1310_PERIP1_CLK_ENB, SPEAR1310_DMA_CLK_ENB, 0,
+			&_lock);
+	clk_register_clkdev(clk, NULL, "ea800000.dma");
+	clk_register_clkdev(clk, NULL, "eb000000.dma");
+
+	clk = clk_register_gate(NULL, "jpeg_clk", "ahb_clk", 0,
+			SPEAR1310_PERIP1_CLK_ENB, SPEAR1310_JPEG_CLK_ENB, 0,
+			&_lock);
+	clk_register_clkdev(clk, NULL, "b2000000.jpeg");
+
+	clk = clk_register_gate(NULL, "gmac_clk", "ahb_clk", 0,
+			SPEAR1310_PERIP1_CLK_ENB, SPEAR1310_GMAC_CLK_ENB, 0,
+			&_lock);
+	clk_register_clkdev(clk, NULL, "e2000000.eth");
+
+	clk = clk_register_gate(NULL, "fsmc_clk", "ahb_clk", 0,
+			SPEAR1310_PERIP1_CLK_ENB, SPEAR1310_FSMC_CLK_ENB, 0,
+			&_lock);
+	clk_register_clkdev(clk, NULL, "b0000000.flash");
+
+	clk = clk_register_gate(NULL, "smi_clk", "ahb_clk", 0,
+			SPEAR1310_PERIP1_CLK_ENB, SPEAR1310_SMI_CLK_ENB, 0,
+			&_lock);
+	clk_register_clkdev(clk, NULL, "ea000000.flash");
+
+	clk = clk_register_gate(NULL, "usbh0_clk", "ahb_clk", 0,
+			SPEAR1310_PERIP1_CLK_ENB, SPEAR1310_UHC0_CLK_ENB, 0,
+			&_lock);
+	clk_register_clkdev(clk, "usbh.0_clk", NULL);
+
+	clk = clk_register_gate(NULL, "usbh1_clk", "ahb_clk", 0,
+			SPEAR1310_PERIP1_CLK_ENB, SPEAR1310_UHC1_CLK_ENB, 0,
+			&_lock);
+	clk_register_clkdev(clk, "usbh.1_clk", NULL);
+
+	clk = clk_register_gate(NULL, "uoc_clk", "ahb_clk", 0,
+			SPEAR1310_PERIP1_CLK_ENB, SPEAR1310_UOC_CLK_ENB, 0,
+			&_lock);
+	clk_register_clkdev(clk, NULL, "uoc");
+
+	clk = clk_register_gate(NULL, "pcie_sata_0_clk", "ahb_clk", 0,
+			SPEAR1310_PERIP1_CLK_ENB, SPEAR1310_PCIE_SATA_0_CLK_ENB,
+			0, &_lock);
+	clk_register_clkdev(clk, NULL, "dw_pcie.0");
+	clk_register_clkdev(clk, NULL, "ahci.0");
+
+	clk = clk_register_gate(NULL, "pcie_sata_1_clk", "ahb_clk", 0,
+			SPEAR1310_PERIP1_CLK_ENB, SPEAR1310_PCIE_SATA_1_CLK_ENB,
+			0, &_lock);
+	clk_register_clkdev(clk, NULL, "dw_pcie.1");
+	clk_register_clkdev(clk, NULL, "ahci.1");
+
+	clk = clk_register_gate(NULL, "pcie_sata_2_clk", "ahb_clk", 0,
+			SPEAR1310_PERIP1_CLK_ENB, SPEAR1310_PCIE_SATA_2_CLK_ENB,
+			0, &_lock);
+	clk_register_clkdev(clk, NULL, "dw_pcie.2");
+	clk_register_clkdev(clk, NULL, "ahci.2");
+
+	clk = clk_register_gate(NULL, "sysram0_clk", "ahb_clk", 0,
+			SPEAR1310_PERIP1_CLK_ENB, SPEAR1310_SYSRAM0_CLK_ENB, 0,
+			&_lock);
+	clk_register_clkdev(clk, "sysram0_clk", NULL);
+
+	clk = clk_register_gate(NULL, "sysram1_clk", "ahb_clk", 0,
+			SPEAR1310_PERIP1_CLK_ENB, SPEAR1310_SYSRAM1_CLK_ENB, 0,
+			&_lock);
+	clk_register_clkdev(clk, "sysram1_clk", NULL);
+
+	clk = clk_register_aux("adc_synth_clk", "adc_synth_gate_clk", "ahb_clk",
+			0, SPEAR1310_ADC_CLK_SYNT, NULL, adc_rtbl,
+			ARRAY_SIZE(adc_rtbl), &_lock, &clk1);
+	clk_register_clkdev(clk, "adc_synth_clk", NULL);
+	clk_register_clkdev(clk1, "adc_synth_gate_clk", NULL);
+
+	clk = clk_register_gate(NULL, "adc_clk", "adc_synth_gate_clk", 0,
+			SPEAR1310_PERIP1_CLK_ENB, SPEAR1310_ADC_CLK_ENB, 0,
+			&_lock);
+	clk_register_clkdev(clk, NULL, "adc_clk");
+
+	/* clock derived from apb clk */
+	clk = clk_register_gate(NULL, "ssp0_clk", "apb_clk", 0,
+			SPEAR1310_PERIP1_CLK_ENB, SPEAR1310_SSP_CLK_ENB, 0,
+			&_lock);
+	clk_register_clkdev(clk, NULL, "e0100000.spi");
+
+	clk = clk_register_gate(NULL, "gpio0_clk", "apb_clk", 0,
+			SPEAR1310_PERIP1_CLK_ENB, SPEAR1310_GPIO0_CLK_ENB, 0,
+			&_lock);
+	clk_register_clkdev(clk, NULL, "e0600000.gpio");
+
+	clk = clk_register_gate(NULL, "gpio1_clk", "apb_clk", 0,
+			SPEAR1310_PERIP1_CLK_ENB, SPEAR1310_GPIO1_CLK_ENB, 0,
+			&_lock);
+	clk_register_clkdev(clk, NULL, "e0680000.gpio");
+
+	clk = clk_register_gate(NULL, "i2s0_clk", "apb_clk", 0,
+			SPEAR1310_PERIP1_CLK_ENB, SPEAR1310_I2S0_CLK_ENB, 0,
+			&_lock);
+	clk_register_clkdev(clk, NULL, "e0180000.i2s");
+
+	clk = clk_register_gate(NULL, "i2s1_clk", "apb_clk", 0,
+			SPEAR1310_PERIP1_CLK_ENB, SPEAR1310_I2S1_CLK_ENB, 0,
+			&_lock);
+	clk_register_clkdev(clk, NULL, "e0200000.i2s");
+
+	clk = clk_register_gate(NULL, "kbd_clk", "apb_clk", 0,
+			SPEAR1310_PERIP2_CLK_ENB, SPEAR1310_KBD_CLK_ENB, 0,
+			&_lock);
+	clk_register_clkdev(clk, NULL, "e0300000.kbd");
+
+	/* RAS clks */
+	clk = clk_register_mux(NULL, "gen_synth0_1_mux_clk",
+			gen_synth0_1_parents, ARRAY_SIZE(gen_synth0_1_parents),
+			0, SPEAR1310_PLL_CFG, SPEAR1310_RAS_SYNT0_1_CLK_SHIFT,
+			SPEAR1310_RAS_SYNT_CLK_MASK, 0, &_lock);
+	clk_register_clkdev(clk, "gen_synth0_1_clk", NULL);
+
+	clk = clk_register_mux(NULL, "gen_synth2_3_mux_clk",
+			gen_synth2_3_parents, ARRAY_SIZE(gen_synth2_3_parents),
+			0, SPEAR1310_PLL_CFG, SPEAR1310_RAS_SYNT2_3_CLK_SHIFT,
+			SPEAR1310_RAS_SYNT_CLK_MASK, 0, &_lock);
+	clk_register_clkdev(clk, "gen_synth2_3_clk", NULL);
+
+	clk = clk_register_frac("gen_synth0_clk", "gen_synth0_1_clk", 0,
+			SPEAR1310_RAS_CLK_SYNT0, gen_rtbl, ARRAY_SIZE(gen_rtbl),
+			&_lock);
+	clk_register_clkdev(clk, "gen_synth0_clk", NULL);
+
+	clk = clk_register_frac("gen_synth1_clk", "gen_synth0_1_clk", 0,
+			SPEAR1310_RAS_CLK_SYNT1, gen_rtbl, ARRAY_SIZE(gen_rtbl),
+			&_lock);
+	clk_register_clkdev(clk, "gen_synth1_clk", NULL);
+
+	clk = clk_register_frac("gen_synth2_clk", "gen_synth2_3_clk", 0,
+			SPEAR1310_RAS_CLK_SYNT2, gen_rtbl, ARRAY_SIZE(gen_rtbl),
+			&_lock);
+	clk_register_clkdev(clk, "gen_synth2_clk", NULL);
+
+	clk = clk_register_frac("gen_synth3_clk", "gen_synth2_3_clk", 0,
+			SPEAR1310_RAS_CLK_SYNT3, gen_rtbl, ARRAY_SIZE(gen_rtbl),
+			&_lock);
+	clk_register_clkdev(clk, "gen_synth3_clk", NULL);
+
+	clk = clk_register_gate(NULL, "ras_osc_24m_clk", "osc_24m_clk", 0,
+			SPEAR1310_RAS_CLK_ENB, SPEAR1310_OSC_24M_CLK_ENB, 0,
+			&_lock);
+	clk_register_clkdev(clk, "ras_osc_24m_clk", NULL);
+
+	clk = clk_register_gate(NULL, "ras_osc_25m_clk", "osc_25m_clk", 0,
+			SPEAR1310_RAS_CLK_ENB, SPEAR1310_OSC_25M_CLK_ENB, 0,
+			&_lock);
+	clk_register_clkdev(clk, "ras_osc_25m_clk", NULL);
+
+	clk = clk_register_gate(NULL, "ras_osc_32k_clk", "osc_32k_clk", 0,
+			SPEAR1310_RAS_CLK_ENB, SPEAR1310_OSC_32K_CLK_ENB, 0,
+			&_lock);
+	clk_register_clkdev(clk, "ras_osc_32k_clk", NULL);
+
+	clk = clk_register_gate(NULL, "ras_pll2_clk", "pll2_clk", 0,
+			SPEAR1310_RAS_CLK_ENB, SPEAR1310_PLL2_CLK_ENB, 0,
+			&_lock);
+	clk_register_clkdev(clk, "ras_pll2_clk", NULL);
+
+	clk = clk_register_gate(NULL, "ras_pll3_clk", "pll3_clk", 0,
+			SPEAR1310_RAS_CLK_ENB, SPEAR1310_PLL3_CLK_ENB, 0,
+			&_lock);
+	clk_register_clkdev(clk, "ras_pll3_clk", NULL);
+
+	clk = clk_register_gate(NULL, "ras_tx125_clk", "gmii_125m_pad_clk", 0,
+			SPEAR1310_RAS_CLK_ENB, SPEAR1310_C125M_PAD_CLK_ENB, 0,
+			&_lock);
+	clk_register_clkdev(clk, "ras_tx125_clk", NULL);
+
+	clk = clk_register_fixed_rate(NULL, "ras_30m_fixed_clk", "pll5_clk", 0,
+			30000000);
+	clk = clk_register_gate(NULL, "ras_30m_clk", "ras_30m_fixed_clk", 0,
+			SPEAR1310_RAS_CLK_ENB, SPEAR1310_C30M_CLK_ENB, 0,
+			&_lock);
+	clk_register_clkdev(clk, "ras_30m_clk", NULL);
+
+	clk = clk_register_fixed_rate(NULL, "ras_48m_fixed_clk", "pll5_clk", 0,
+			48000000);
+	clk = clk_register_gate(NULL, "ras_48m_clk", "ras_48m_fixed_clk", 0,
+			SPEAR1310_RAS_CLK_ENB, SPEAR1310_C48M_CLK_ENB, 0,
+			&_lock);
+	clk_register_clkdev(clk, "ras_48m_clk", NULL);
+
+	clk = clk_register_gate(NULL, "ras_ahb_clk", "ahb_clk", 0,
+			SPEAR1310_RAS_CLK_ENB, SPEAR1310_ACLK_CLK_ENB, 0,
+			&_lock);
+	clk_register_clkdev(clk, "ras_ahb_clk", NULL);
+
+	clk = clk_register_gate(NULL, "ras_apb_clk", "apb_clk", 0,
+			SPEAR1310_RAS_CLK_ENB, SPEAR1310_PCLK_CLK_ENB, 0,
+			&_lock);
+	clk_register_clkdev(clk, "ras_apb_clk", NULL);
+
+	clk = clk_register_fixed_rate(NULL, "ras_plclk0_clk", NULL, CLK_IS_ROOT,
+			50000000);
+
+	clk = clk_register_fixed_rate(NULL, "ras_tx50_clk", NULL, CLK_IS_ROOT,
+			50000000);
+
+	clk = clk_register_gate(NULL, "can0_clk", "apb_clk", 0,
+			SPEAR1310_RAS_SW_CLK_CTRL, SPEAR1310_CAN0_CLK_ENB, 0,
+			&_lock);
+	clk_register_clkdev(clk, NULL, "c_can_platform.0");
+
+	clk = clk_register_gate(NULL, "can1_clk", "apb_clk", 0,
+			SPEAR1310_RAS_SW_CLK_CTRL, SPEAR1310_CAN1_CLK_ENB, 0,
+			&_lock);
+	clk_register_clkdev(clk, NULL, "c_can_platform.1");
+
+	clk = clk_register_gate(NULL, "ras_smii0_clk", "ras_ahb_clk", 0,
+			SPEAR1310_RAS_SW_CLK_CTRL, SPEAR1310_MII0_CLK_ENB, 0,
+			&_lock);
+	clk_register_clkdev(clk, NULL, "5c400000.eth");
+
+	clk = clk_register_gate(NULL, "ras_smii1_clk", "ras_ahb_clk", 0,
+			SPEAR1310_RAS_SW_CLK_CTRL, SPEAR1310_MII1_CLK_ENB, 0,
+			&_lock);
+	clk_register_clkdev(clk, NULL, "5c500000.eth");
+
+	clk = clk_register_gate(NULL, "ras_smii2_clk", "ras_ahb_clk", 0,
+			SPEAR1310_RAS_SW_CLK_CTRL, SPEAR1310_MII2_CLK_ENB, 0,
+			&_lock);
+	clk_register_clkdev(clk, NULL, "5c600000.eth");
+
+	clk = clk_register_gate(NULL, "ras_rgmii_clk", "ras_ahb_clk", 0,
+			SPEAR1310_RAS_SW_CLK_CTRL, SPEAR1310_GMII_CLK_ENB, 0,
+			&_lock);
+	clk_register_clkdev(clk, NULL, "5c700000.eth");
+
+	clk = clk_register_mux(NULL, "smii_rgmii_phy_mux_clk",
+			smii_rgmii_phy_parents,
+			ARRAY_SIZE(smii_rgmii_phy_parents), 0,
+			SPEAR1310_RAS_CTRL_REG1,
+			SPEAR1310_SMII_RGMII_PHY_CLK_SHIFT,
+			SPEAR1310_PHY_CLK_MASK, 0, &_lock);
+	clk_register_clkdev(clk, NULL, "stmmacphy.1");
+	clk_register_clkdev(clk, NULL, "stmmacphy.2");
+	clk_register_clkdev(clk, NULL, "stmmacphy.4");
+
+	clk = clk_register_mux(NULL, "rmii_phy_mux_clk", rmii_phy_parents,
+			ARRAY_SIZE(rmii_phy_parents), 0,
+			SPEAR1310_RAS_CTRL_REG1, SPEAR1310_RMII_PHY_CLK_SHIFT,
+			SPEAR1310_PHY_CLK_MASK, 0, &_lock);
+	clk_register_clkdev(clk, NULL, "stmmacphy.3");
+
+	clk = clk_register_mux(NULL, "uart1_mux_clk", uart_parents,
+			ARRAY_SIZE(uart_parents), 0, SPEAR1310_RAS_CTRL_REG0,
+			SPEAR1310_UART1_CLK_SHIFT, SPEAR1310_RAS_UART_CLK_MASK,
+			0, &_lock);
+	clk_register_clkdev(clk, "uart1_mux_clk", NULL);
+
+	clk = clk_register_gate(NULL, "uart1_clk", "uart1_mux_clk", 0,
+			SPEAR1310_RAS_SW_CLK_CTRL, SPEAR1310_UART1_CLK_ENB, 0,
+			&_lock);
+	clk_register_clkdev(clk, NULL, "5c800000.serial");
+
+	clk = clk_register_mux(NULL, "uart2_mux_clk", uart_parents,
+			ARRAY_SIZE(uart_parents), 0, SPEAR1310_RAS_CTRL_REG0,
+			SPEAR1310_UART2_CLK_SHIFT, SPEAR1310_RAS_UART_CLK_MASK,
+			0, &_lock);
+	clk_register_clkdev(clk, "uart2_mux_clk", NULL);
+
+	clk = clk_register_gate(NULL, "uart2_clk", "uart2_mux_clk", 0,
+			SPEAR1310_RAS_SW_CLK_CTRL, SPEAR1310_UART2_CLK_ENB, 0,
+			&_lock);
+	clk_register_clkdev(clk, NULL, "5c900000.serial");
+
+	clk = clk_register_mux(NULL, "uart3_mux_clk", uart_parents,
+			ARRAY_SIZE(uart_parents), 0, SPEAR1310_RAS_CTRL_REG0,
+			SPEAR1310_UART3_CLK_SHIFT, SPEAR1310_RAS_UART_CLK_MASK,
+			0, &_lock);
+	clk_register_clkdev(clk, "uart3_mux_clk", NULL);
+
+	clk = clk_register_gate(NULL, "uart3_clk", "uart3_mux_clk", 0,
+			SPEAR1310_RAS_SW_CLK_CTRL, SPEAR1310_UART3_CLK_ENB, 0,
+			&_lock);
+	clk_register_clkdev(clk, NULL, "5ca00000.serial");
+
+	clk = clk_register_mux(NULL, "uart4_mux_clk", uart_parents,
+			ARRAY_SIZE(uart_parents), 0, SPEAR1310_RAS_CTRL_REG0,
+			SPEAR1310_UART4_CLK_SHIFT, SPEAR1310_RAS_UART_CLK_MASK,
+			0, &_lock);
+	clk_register_clkdev(clk, "uart4_mux_clk", NULL);
+
+	clk = clk_register_gate(NULL, "uart4_clk", "uart4_mux_clk", 0,
+			SPEAR1310_RAS_SW_CLK_CTRL, SPEAR1310_UART4_CLK_ENB, 0,
+			&_lock);
+	clk_register_clkdev(clk, NULL, "5cb00000.serial");
+
+	clk = clk_register_mux(NULL, "uart5_mux_clk", uart_parents,
+			ARRAY_SIZE(uart_parents), 0, SPEAR1310_RAS_CTRL_REG0,
+			SPEAR1310_UART5_CLK_SHIFT, SPEAR1310_RAS_UART_CLK_MASK,
+			0, &_lock);
+	clk_register_clkdev(clk, "uart5_mux_clk", NULL);
+
+	clk = clk_register_gate(NULL, "uart5_clk", "uart5_mux_clk", 0,
+			SPEAR1310_RAS_SW_CLK_CTRL, SPEAR1310_UART5_CLK_ENB, 0,
+			&_lock);
+	clk_register_clkdev(clk, NULL, "5cc00000.serial");
+
+	clk = clk_register_mux(NULL, "i2c1_mux_clk", i2c_parents,
+			ARRAY_SIZE(i2c_parents), 0, SPEAR1310_RAS_CTRL_REG0,
+			SPEAR1310_I2C1_CLK_SHIFT, SPEAR1310_I2C_CLK_MASK, 0,
+			&_lock);
+	clk_register_clkdev(clk, "i2c1_mux_clk", NULL);
+
+	clk = clk_register_gate(NULL, "i2c1_clk", "i2c1_mux_clk", 0,
+			SPEAR1310_RAS_SW_CLK_CTRL, SPEAR1310_I2C1_CLK_ENB, 0,
+			&_lock);
+	clk_register_clkdev(clk, NULL, "5cd00000.i2c");
+
+	clk = clk_register_mux(NULL, "i2c2_mux_clk", i2c_parents,
+			ARRAY_SIZE(i2c_parents), 0, SPEAR1310_RAS_CTRL_REG0,
+			SPEAR1310_I2C2_CLK_SHIFT, SPEAR1310_I2C_CLK_MASK, 0,
+			&_lock);
+	clk_register_clkdev(clk, "i2c2_mux_clk", NULL);
+
+	clk = clk_register_gate(NULL, "i2c2_clk", "i2c2_mux_clk", 0,
+			SPEAR1310_RAS_SW_CLK_CTRL, SPEAR1310_I2C2_CLK_ENB, 0,
+			&_lock);
+	clk_register_clkdev(clk, NULL, "5ce00000.i2c");
+
+	clk = clk_register_mux(NULL, "i2c3_mux_clk", i2c_parents,
+			ARRAY_SIZE(i2c_parents), 0, SPEAR1310_RAS_CTRL_REG0,
+			SPEAR1310_I2C3_CLK_SHIFT, SPEAR1310_I2C_CLK_MASK, 0,
+			&_lock);
+	clk_register_clkdev(clk, "i2c3_mux_clk", NULL);
+
+	clk = clk_register_gate(NULL, "i2c3_clk", "i2c3_mux_clk", 0,
+			SPEAR1310_RAS_SW_CLK_CTRL, SPEAR1310_I2C3_CLK_ENB, 0,
+			&_lock);
+	clk_register_clkdev(clk, NULL, "5cf00000.i2c");
+
+	clk = clk_register_mux(NULL, "i2c4_mux_clk", i2c_parents,
+			ARRAY_SIZE(i2c_parents), 0, SPEAR1310_RAS_CTRL_REG0,
+			SPEAR1310_I2C4_CLK_SHIFT, SPEAR1310_I2C_CLK_MASK, 0,
+			&_lock);
+	clk_register_clkdev(clk, "i2c4_mux_clk", NULL);
+
+	clk = clk_register_gate(NULL, "i2c4_clk", "i2c4_mux_clk", 0,
+			SPEAR1310_RAS_SW_CLK_CTRL, SPEAR1310_I2C4_CLK_ENB, 0,
+			&_lock);
+	clk_register_clkdev(clk, NULL, "5d000000.i2c");
+
+	clk = clk_register_mux(NULL, "i2c5_mux_clk", i2c_parents,
+			ARRAY_SIZE(i2c_parents), 0, SPEAR1310_RAS_CTRL_REG0,
+			SPEAR1310_I2C5_CLK_SHIFT, SPEAR1310_I2C_CLK_MASK, 0,
+			&_lock);
+	clk_register_clkdev(clk, "i2c5_mux_clk", NULL);
+
+	clk = clk_register_gate(NULL, "i2c5_clk", "i2c5_mux_clk", 0,
+			SPEAR1310_RAS_SW_CLK_CTRL, SPEAR1310_I2C5_CLK_ENB, 0,
+			&_lock);
+	clk_register_clkdev(clk, NULL, "5d100000.i2c");
+
+	clk = clk_register_mux(NULL, "i2c6_mux_clk", i2c_parents,
+			ARRAY_SIZE(i2c_parents), 0, SPEAR1310_RAS_CTRL_REG0,
+			SPEAR1310_I2C6_CLK_SHIFT, SPEAR1310_I2C_CLK_MASK, 0,
+			&_lock);
+	clk_register_clkdev(clk, "i2c6_mux_clk", NULL);
+
+	clk = clk_register_gate(NULL, "i2c6_clk", "i2c6_mux_clk", 0,
+			SPEAR1310_RAS_SW_CLK_CTRL, SPEAR1310_I2C6_CLK_ENB, 0,
+			&_lock);
+	clk_register_clkdev(clk, NULL, "5d200000.i2c");
+
+	clk = clk_register_mux(NULL, "i2c7_mux_clk", i2c_parents,
+			ARRAY_SIZE(i2c_parents), 0, SPEAR1310_RAS_CTRL_REG0,
+			SPEAR1310_I2C7_CLK_SHIFT, SPEAR1310_I2C_CLK_MASK, 0,
+			&_lock);
+	clk_register_clkdev(clk, "i2c7_mux_clk", NULL);
+
+	clk = clk_register_gate(NULL, "i2c7_clk", "i2c7_mux_clk", 0,
+			SPEAR1310_RAS_SW_CLK_CTRL, SPEAR1310_I2C7_CLK_ENB, 0,
+			&_lock);
+	clk_register_clkdev(clk, NULL, "5d300000.i2c");
+
+	clk = clk_register_mux(NULL, "ssp1_mux_clk", ssp1_parents,
+			ARRAY_SIZE(ssp1_parents), 0, SPEAR1310_RAS_CTRL_REG0,
+			SPEAR1310_SSP1_CLK_SHIFT, SPEAR1310_SSP1_CLK_MASK, 0,
+			&_lock);
+	clk_register_clkdev(clk, "ssp1_mux_clk", NULL);
+
+	clk = clk_register_gate(NULL, "ssp1_clk", "ssp1_mux_clk", 0,
+			SPEAR1310_RAS_SW_CLK_CTRL, SPEAR1310_SSP1_CLK_ENB, 0,
+			&_lock);
+	clk_register_clkdev(clk, NULL, "5d400000.spi");
+
+	clk = clk_register_mux(NULL, "pci_mux_clk", pci_parents,
+			ARRAY_SIZE(pci_parents), 0, SPEAR1310_RAS_CTRL_REG0,
+			SPEAR1310_PCI_CLK_SHIFT, SPEAR1310_PCI_CLK_MASK, 0,
+			&_lock);
+	clk_register_clkdev(clk, "pci_mux_clk", NULL);
+
+	clk = clk_register_gate(NULL, "pci_clk", "pci_mux_clk", 0,
+			SPEAR1310_RAS_SW_CLK_CTRL, SPEAR1310_PCI_CLK_ENB, 0,
+			&_lock);
+	clk_register_clkdev(clk, NULL, "pci");
+
+	clk = clk_register_mux(NULL, "tdm1_mux_clk", tdm_parents,
+			ARRAY_SIZE(tdm_parents), 0, SPEAR1310_RAS_CTRL_REG0,
+			SPEAR1310_TDM1_CLK_SHIFT, SPEAR1310_TDM_CLK_MASK, 0,
+			&_lock);
+	clk_register_clkdev(clk, "tdm1_mux_clk", NULL);
+
+	clk = clk_register_gate(NULL, "tdm1_clk", "tdm1_mux_clk", 0,
+			SPEAR1310_RAS_SW_CLK_CTRL, SPEAR1310_TDM1_CLK_ENB, 0,
+			&_lock);
+	clk_register_clkdev(clk, NULL, "tdm_hdlc.0");
+
+	clk = clk_register_mux(NULL, "tdm2_mux_clk", tdm_parents,
+			ARRAY_SIZE(tdm_parents), 0, SPEAR1310_RAS_CTRL_REG0,
+			SPEAR1310_TDM2_CLK_SHIFT, SPEAR1310_TDM_CLK_MASK, 0,
+			&_lock);
+	clk_register_clkdev(clk, "tdm2_mux_clk", NULL);
+
+	clk = clk_register_gate(NULL, "tdm2_clk", "tdm2_mux_clk", 0,
+			SPEAR1310_RAS_SW_CLK_CTRL, SPEAR1310_TDM2_CLK_ENB, 0,
+			&_lock);
+	clk_register_clkdev(clk, NULL, "tdm_hdlc.1");
+}

drivers/clk/spear/spear1340_clock.c

+/*
+ * arch/arm/mach-spear13xx/spear1340_clock.c
+ *
+ * SPEAr1340 machine clock framework source file
+ *
+ * Copyright (C) 2012 ST Microelectronics
+ * Viresh Kumar <viresh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/clk.h>
+#include <linux/clkdev.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/of_platform.h>
+#include <linux/spinlock_types.h>
+#include <mach/spear.h>
+#include "clk.h"
+
+/* Clock Configuration Registers */
+#define SPEAR1340_SYS_CLK_CTRL			(VA_MISC_BASE + 0x200)
+	#define SPEAR1340_HCLK_SRC_SEL_SHIFT	27
+	#define SPEAR1340_HCLK_SRC_SEL_MASK	1
+	#define SPEAR1340_SCLK_SRC_SEL_SHIFT	23
+	#define SPEAR1340_SCLK_SRC_SEL_MASK	3
+
+/* PLL related registers and bit values */
+#define SPEAR1340_PLL_CFG			(VA_MISC_BASE + 0x210)
+	/* PLL_CFG bit values */
+	#define SPEAR1340_CLCD_SYNT_CLK_MASK		1
+	#define SPEAR1340_CLCD_SYNT_CLK_SHIFT		31
+	#define SPEAR1340_GEN_SYNT2_3_CLK_SHIFT		29
+	#define SPEAR1340_GEN_SYNT_CLK_MASK		2
+	#define SPEAR1340_GEN_SYNT0_1_CLK_SHIFT		27
+	#define SPEAR1340_PLL_CLK_MASK			2
+	#define SPEAR1340_PLL3_CLK_SHIFT		24
+	#define SPEAR1340_PLL2_CLK_SHIFT		22
+	#define SPEAR1340_PLL1_CLK_SHIFT		20
+
+#define SPEAR1340_PLL1_CTR			(VA_MISC_BASE + 0x214)
+#define SPEAR1340_PLL1_FRQ			(VA_MISC_BASE + 0x218)
+#define SPEAR1340_PLL2_CTR			(VA_MISC_BASE + 0x220)
+#define SPEAR1340_PLL2_FRQ			(VA_MISC_BASE + 0x224)
+#define SPEAR1340_PLL3_CTR			(VA_MISC_BASE + 0x22C)
+#define SPEAR1340_PLL3_FRQ			(VA_MISC_BASE + 0x230)
+#define SPEAR1340_PLL4_CTR			(VA_MISC_BASE + 0x238)
+#define SPEAR1340_PLL4_FRQ			(VA_MISC_BASE + 0x23C)
+#define SPEAR1340_PERIP_CLK_CFG			(VA_MISC_BASE + 0x244)
+	/* PERIP_CLK_CFG bit values */
+	#define SPEAR1340_SPDIF_CLK_MASK		1
+	#define SPEAR1340_SPDIF_OUT_CLK_SHIFT		15
+	#define SPEAR1340_SPDIF_IN_CLK_SHIFT		14
+	#define SPEAR1340_GPT3_CLK_SHIFT		13
+	#define SPEAR1340_GPT2_CLK_SHIFT		12
+	#define SPEAR1340_GPT_CLK_MASK			1
+	#define SPEAR1340_GPT1_CLK_SHIFT		9
+	#define SPEAR1340_GPT0_CLK_SHIFT		8
+	#define SPEAR1340_UART_CLK_MASK			2
+	#define SPEAR1340_UART1_CLK_SHIFT		6
+	#define SPEAR1340_UART0_CLK_SHIFT		4
+	#define SPEAR1340_CLCD_CLK_MASK			2
+	#define SPEAR1340_CLCD_CLK_SHIFT		2
+	#define SPEAR1340_C3_CLK_MASK			1
+	#define SPEAR1340_C3_CLK_SHIFT			1
+
+#define SPEAR1340_GMAC_CLK_CFG			(VA_MISC_BASE + 0x248)
+	#define SPEAR1340_GMAC_PHY_CLK_MASK		1
+	#define SPEAR1340_GMAC_PHY_CLK_SHIFT		2
+	#define SPEAR1340_GMAC_PHY_INPUT_CLK_MASK	2
+	#define SPEAR1340_GMAC_PHY_INPUT_CLK_SHIFT	0
+
+#define SPEAR1340_I2S_CLK_CFG			(VA_MISC_BASE + 0x24C)
+	/* I2S_CLK_CFG register mask */
+	#define SPEAR1340_I2S_SCLK_X_MASK		0x1F
+	#define SPEAR1340_I2S_SCLK_X_SHIFT		27
+	#define SPEAR1340_I2S_SCLK_Y_MASK		0x1F
+	#define SPEAR1340_I2S_SCLK_Y_SHIFT		22
+	#define SPEAR1340_I2S_SCLK_EQ_SEL_SHIFT		21
+	#define SPEAR1340_I2S_SCLK_SYNTH_ENB		20
+	#define SPEAR1340_I2S_PRS1_CLK_X_MASK		0xFF
+	#define SPEAR1340_I2S_PRS1_CLK_X_SHIFT		12
+	#define SPEAR1340_I2S_PRS1_CLK_Y_MASK		0xFF
+	#define SPEAR1340_I2S_PRS1_CLK_Y_SHIFT		4
+	#define SPEAR1340_I2S_PRS1_EQ_SEL_SHIFT		3
+	#define SPEAR1340_I2S_REF_SEL_MASK		1
+	#define SPEAR1340_I2S_REF_SHIFT			2
+	#define SPEAR1340_I2S_SRC_CLK_MASK		2
+	#define SPEAR1340_I2S_SRC_CLK_SHIFT		0
+
+#define SPEAR1340_C3_CLK_SYNT			(VA_MISC_BASE + 0x250)
+#define SPEAR1340_UART0_CLK_SYNT		(VA_MISC_BASE + 0x254)
+#define SPEAR1340_UART1_CLK_SYNT		(VA_MISC_BASE + 0x258)
+#define SPEAR1340_GMAC_CLK_SYNT			(VA_MISC_BASE + 0x25C)
+#define SPEAR1340_SDHCI_CLK_SYNT		(VA_MISC_BASE + 0x260)
+#define SPEAR1340_CFXD_CLK_SYNT			(VA_MISC_BASE + 0x264)
+#define SPEAR1340_ADC_CLK_SYNT			(VA_MISC_BASE + 0x270)
+#define SPEAR1340_AMBA_CLK_SYNT			(VA_MISC_BASE + 0x274)
+#define SPEAR1340_CLCD_CLK_SYNT			(VA_MISC_BASE + 0x27C)
+#define SPEAR1340_SYS_CLK_SYNT			(VA_MISC_BASE + 0x284)
+#define SPEAR1340_GEN_CLK_SYNT0			(VA_MISC_BASE + 0x28C)
+#define SPEAR1340_GEN_CLK_SYNT1			(VA_MISC_BASE + 0x294)
+#define SPEAR1340_GEN_CLK_SYNT2			(VA_MISC_BASE + 0x29C)
+#define SPEAR1340_GEN_CLK_SYNT3			(VA_MISC_BASE + 0x304)
+#define SPEAR1340_PERIP1_CLK_ENB		(VA_MISC_BASE + 0x30C)
+	#define SPEAR1340_RTC_CLK_ENB			31
+	#define SPEAR1340_ADC_CLK_ENB			30
+	#define SPEAR1340_C3_CLK_ENB			29
+	#define SPEAR1340_CLCD_CLK_ENB			27
+	#define SPEAR1340_DMA_CLK_ENB			25
+	#define SPEAR1340_GPIO1_CLK_ENB			24
+	#define SPEAR1340_GPIO0_CLK_ENB			23
+	#define SPEAR1340_GPT1_CLK_ENB			22
+	#define SPEAR1340_GPT0_CLK_ENB			21
+	#define SPEAR1340_I2S_PLAY_CLK_ENB		20
+	#define SPEAR1340_I2S_REC_CLK_ENB		19
+	#define SPEAR1340_I2C0_CLK_ENB			18
+	#define SPEAR1340_SSP_CLK_ENB			17
+	#define SPEAR1340_UART0_CLK_ENB			15
+	#define SPEAR1340_PCIE_SATA_CLK_ENB		12
+	#define SPEAR1340_UOC_CLK_ENB			11
+	#define SPEAR1340_UHC1_CLK_ENB			10
+	#define SPEAR1340_UHC0_CLK_ENB			9
+	#define SPEAR1340_GMAC_CLK_ENB			8
+	#define SPEAR1340_CFXD_CLK_ENB			7
+	#define SPEAR1340_SDHCI_CLK_ENB			6
+	#define SPEAR1340_SMI_CLK_ENB			5
+	#define SPEAR1340_FSMC_CLK_ENB			4
+	#define SPEAR1340_SYSRAM0_CLK_ENB		3
+	#define SPEAR1340_SYSRAM1_CLK_ENB		2
+	#define SPEAR1340_SYSROM_CLK_ENB		1
+	#define SPEAR1340_BUS_CLK_ENB			0
+
+#define SPEAR1340_PERIP2_CLK_ENB		(VA_MISC_BASE + 0x310)
+	#define SPEAR1340_THSENS_CLK_ENB		8
+	#define SPEAR1340_I2S_REF_PAD_CLK_ENB		7
+	#define SPEAR1340_ACP_CLK_ENB			6
+	#define SPEAR1340_GPT3_CLK_ENB			5
+	#define SPEAR1340_GPT2_CLK_ENB			4
+	#define SPEAR1340_KBD_CLK_ENB			3
+	#define SPEAR1340_CPU_DBG_CLK_ENB		2
+	#define SPEAR1340_DDR_CORE_CLK_ENB		1
+	#define SPEAR1340_DDR_CTRL_CLK_ENB		0
+
+#define SPEAR1340_PERIP3_CLK_ENB		(VA_MISC_BASE + 0x314)
+	#define SPEAR1340_PLGPIO_CLK_ENB		18
+	#define SPEAR1340_VIDEO_DEC_CLK_ENB		16
+	#define SPEAR1340_VIDEO_ENC_CLK_ENB		15
+	#define SPEAR1340_SPDIF_OUT_CLK_ENB		13
+	#define SPEAR1340_SPDIF_IN_CLK_ENB		12
+	#define SPEAR1340_VIDEO_IN_CLK_ENB		11
+	#define SPEAR1340_CAM0_CLK_ENB			10
+	#define SPEAR1340_CAM1_CLK_ENB			9
+	#define SPEAR1340_CAM2_CLK_ENB			8
+	#define SPEAR1340_CAM3_CLK_ENB			7
+	#define SPEAR1340_MALI_CLK_ENB			6
+	#define SPEAR1340_CEC0_CLK_ENB			5
+	#define SPEAR1340_CEC1_CLK_ENB			4
+	#define SPEAR1340_PWM_CLK_ENB			3
+	#define SPEAR1340_I2C1_CLK_ENB			2
+	#define SPEAR1340_UART1_CLK_ENB			1
+
+static DEFINE_SPINLOCK(_lock);
+
+/* pll rate configuration table, in ascending order of rates */
+static struct pll_rate_tbl pll_rtbl[] = {
+	/* PCLK 24MHz */
+	{.mode = 0, .m = 0x83, .n = 0x04, .p = 0x5}, /* vco 1572, pll 49.125 MHz */
+	{.mode = 0, .m = 0x7D, .n = 0x06, .p = 0x3}, /* vco 1000, pll 125 MHz */
+	{.mode = 0, .m = 0x64, .n = 0x06, .p = 0x1}, /* vco 800, pll 400 MHz */
+	{.mode = 0, .m = 0x7D, .n = 0x06, .p = 0x1}, /* vco 1000, pll 500 MHz */
+	{.mode = 0, .m = 0xA6, .n = 0x06, .p = 0x1}, /* vco 1328, pll 664 MHz */
+	{.mode = 0, .m = 0xC8, .n = 0x06, .p = 0x1}, /* vco 1600, pll 800 MHz */
+	{.mode = 0, .m = 0x7D, .n = 0x06, .p = 0x0}, /* vco 1, pll 1 GHz */
+	{.mode = 0, .m = 0x96, .n = 0x06, .p = 0x0}, /* vco 1200, pll 1200 MHz */
+};
+
+/* vco-pll4 rate configuration table, in ascending order of rates */
+static struct pll_rate_tbl pll4_rtbl[] = {
+	{.mode = 0, .m = 0x7D, .n = 0x06, .p = 0x2}, /* vco 1000, pll 250 MHz */
+	{.mode = 0, .m = 0xA6, .n = 0x06, .p = 0x2}, /* vco 1328, pll 332 MHz */
+	{.mode = 0, .m = 0xC8, .n = 0x06, .p = 0x2}, /* vco 1600, pll 400 MHz */
+	{.mode = 0, .m = 0x7D, .n = 0x06, .p = 0x0}, /* vco 1, pll 1 GHz */
+};
+
+/*
+ * All below entries generate 166 MHz for
+ * different values of vco1div2
+ */
+static struct frac_rate_tbl amba_synth_rtbl[] = {
+	{.div = 0x06062}, /* for vco1div2 = 500 MHz */
+	{.div = 0x04D1B}, /* for vco1div2 = 400 MHz */
+	{.div = 0x04000}, /* for vco1div2 = 332 MHz */
+	{.div = 0x03031}, /* for vco1div2 = 250 MHz */
+	{.div = 0x0268D}, /* for vco1div2 = 200 MHz */
+};
+
+/*
+ * Synthesizer Clock derived from vcodiv2. This clock is one of the
+ * possible clocks to feed cpu directly.
+ * We can program this synthesizer to make cpu run on different clock
+ * frequencies.
+ * Following table provides configuration values to let cpu run on 200,
+ * 250, 332, 400 or 500 MHz considering different possibilites of input
+ * (vco1div2) clock.
+ *
+ * --------------------------------------------------------------------
+ * vco1div2(Mhz)	fout(Mhz)	cpuclk = fout/2		div
+ * --------------------------------------------------------------------
+ * 400			200		100			0x04000
+ * 400			250		125			0x03333
+ * 400			332		166			0x0268D
+ * 400			400		200			0x02000
+ * --------------------------------------------------------------------
+ * 500			200		100			0x05000
+ * 500			250		125			0x04000
+ * 500			332		166			0x03031
+ * 500			400		200			0x02800
+ * 500			500		250			0x02000
+ * --------------------------------------------------------------------
+ * 664			200		100			0x06a38
+ * 664			250		125			0x054FD
+ * 664			332		166			0x04000
+ * 664			400		200			0x0351E
+ * 664			500		250			0x02A7E
+ * --------------------------------------------------------------------
+ * 800			200		100			0x08000
+ * 800			250		125			0x06666
+ * 800			332		166			0x04D18
+ * 800			400		200			0x04000
+ * 800			500		250			0x03333
+ * --------------------------------------------------------------------
+ * sys rate configuration table is in descending order of divisor.
+ */
+static struct frac_rate_tbl sys_synth_rtbl[] = {
+	{.div = 0x08000},
+	{.div = 0x06a38},
+	{.div = 0x06666},
+	{.div = 0x054FD},
+	{.div = 0x05000},
+	{.div = 0x04D18},
+	{.div = 0x04000},
+	{.div = 0x0351E},
+	{.div = 0x03333},
+	{.div = 0x03031},
+	{.div = 0x02A7E},
+	{.div = 0x02800},
+	{.div = 0x0268D},
+	{.div = 0x02000},
+};
+
+/* aux rate configuration table, in ascending order of rates */
+static struct aux_rate_tbl aux_rtbl[] = {
+	/* For VCO1div2 = 500 MHz */
+	{.xscale = 10, .yscale = 204, .eq = 0}, /* 12.29 MHz */
+	{.xscale = 4, .yscale = 21, .eq = 0}, /* 48 MHz */
+	{.xscale = 2, .yscale = 6, .eq = 0}, /* 83 MHz */
+	{.xscale = 2, .yscale = 4, .eq = 0}, /* 125 MHz */
+	{.xscale = 1, .yscale = 3, .eq = 1}, /* 166 MHz */
+	{.xscale = 1, .yscale = 2, .eq = 1}, /* 250 MHz */
+};
+
+/* gmac rate configuration table, in ascending order of rates */
+static struct aux_rate_tbl gmac_rtbl[] = {
+	/* For gmac phy input clk */
+	{.xscale = 2, .yscale = 6, .eq = 0}, /* divided by 6 */
+	{.xscale = 2, .yscale = 4, .eq = 0}, /* divided by 4 */
+	{.xscale = 1, .yscale = 3, .eq = 1}, /* divided by 3 */
+	{.xscale = 1, .yscale = 2, .eq = 1}, /* divided by 2 */
+};
+
+/* clcd rate configuration table, in ascending order of rates */
+static struct frac_rate_tbl clcd_rtbl[] = {
+	{.div = 0x14000}, /* 25 Mhz , for vc01div4 = 250 MHz*/
+	{.div = 0x1284B}, /* 27 Mhz , for vc01div4 = 250 MHz*/
+	{.div = 0x0D8D3}, /* 58 Mhz , for vco1div4 = 393 MHz */
+	{.div = 0x0B72C}, /* 58 Mhz , for vco1div4 = 332 MHz */
+	{.div = 0x089EE}, /* 58 Mhz , for vc01div4 = 250 MHz*/
+	{.div = 0x07BA0}, /* 65 Mhz , for vc01div4 = 250 MHz*/
+	{.div = 0x06f1C}, /* 72 Mhz , for vc01div4 = 250 MHz*/
+	{.div = 0x06E58}, /* 58 Mhz , for vco1div4 = 200 MHz */
+	{.div = 0x06c1B}, /* 74 Mhz , for vc01div4 = 250 MHz*/
+	{.div = 0x04A12}, /* 108 Mhz , for vc01div4 = 250 MHz*/
+	{.div = 0x0378E}, /* 144 Mhz , for vc01div4 = 250 MHz*/
+	{.div = 0x0360D}, /* 148 Mhz , for vc01div4 = 250 MHz*/
+	{.div = 0x035E0}, /* 148.5 MHz, for vc01div4 = 250 MHz*/
+};
+
+/* i2s prescaler1 masks */
+static struct aux_clk_masks i2s_prs1_masks = {
+	.eq_sel_mask = AUX_EQ_SEL_MASK,
+	.eq_sel_shift = SPEAR1340_I2S_PRS1_EQ_SEL_SHIFT,
+	.eq1_mask = AUX_EQ1_SEL,
+	.eq2_mask = AUX_EQ2_SEL,
+	.xscale_sel_mask = SPEAR1340_I2S_PRS1_CLK_X_MASK,
+	.xscale_sel_shift = SPEAR1340_I2S_PRS1_CLK_X_SHIFT,
+	.yscale_sel_mask = SPEAR1340_I2S_PRS1_CLK_Y_MASK,
+	.yscale_sel_shift = SPEAR1340_I2S_PRS1_CLK_Y_SHIFT,
+};
+
+/* i2s sclk (bit clock) syynthesizers masks */
+static struct aux_clk_masks i2s_sclk_masks = {
+	.eq_sel_mask = AUX_EQ_SEL_MASK,
+	.eq_sel_shift = SPEAR1340_I2S_SCLK_EQ_SEL_SHIFT,
+	.eq1_mask = AUX_EQ1_SEL,
+	.eq2_mask = AUX_EQ2_SEL,
+	.xscale_sel_mask = SPEAR1340_I2S_SCLK_X_MASK,
+	.xscale_sel_shift = SPEAR1340_I2S_SCLK_X_SHIFT,
+	.yscale_sel_mask = SPEAR1340_I2S_SCLK_Y_MASK,
+	.yscale_sel_shift = SPEAR1340_I2S_SCLK_Y_SHIFT,
+	.enable_bit = SPEAR1340_I2S_SCLK_SYNTH_ENB,
+};
+
+/* i2s prs1 aux rate configuration table, in ascending order of rates */
+static struct aux_rate_tbl i2s_prs1_rtbl[] = {
+	/* For parent clk = 49.152 MHz */
+	{.xscale = 1, .yscale = 12, .eq = 0}, /* 2.048 MHz, smp freq = 8Khz */
+	{.xscale = 11, .yscale = 96, .eq = 0}, /* 2.816 MHz, smp freq = 11Khz */
+	{.xscale = 1, .yscale = 6, .eq = 0}, /* 4.096 MHz, smp freq = 16Khz */
+	{.xscale = 11, .yscale = 48, .eq = 0}, /* 5.632 MHz, smp freq = 22Khz */
+
+	/*
+	 * with parent clk = 49.152, freq gen is 8.192 MHz, smp freq = 32Khz
+	 * with parent clk = 12.288, freq gen is 2.048 MHz, smp freq = 8Khz
+	 */
+	{.xscale = 1, .yscale = 3, .eq = 0},
+
+	/* For parent clk = 49.152 MHz */
+	{.xscale = 17, .yscale = 37, .eq = 0}, /* 11.289 MHz, smp freq = 44Khz*/
+	{.xscale = 1, .yscale = 2, .eq = 0}, /* 12.288 MHz, smp freq = 48Khz*/
+};
+
+/* i2s sclk aux rate configuration table, in ascending order of rates */
+static struct aux_rate_tbl i2s_sclk_rtbl[] = {
+	/* For sclk = ref_clk * x/2/y */
+	{.xscale = 1, .yscale = 4, .eq = 0},
+	{.xscale = 1, .yscale = 2, .eq = 0},
+};
+
+/* adc rate configuration table, in ascending order of rates */
+/* possible adc range is 2.5 MHz to 20 MHz. */
+static struct aux_rate_tbl adc_rtbl[] = {
+	/* For ahb = 166.67 MHz */
+	{.xscale = 1, .yscale = 31, .eq = 0}, /* 2.68 MHz */
+	{.xscale = 2, .yscale = 21, .eq = 0}, /* 7.94 MHz */
+	{.xscale = 4, .yscale = 21, .eq = 0}, /* 15.87 MHz */
+	{.xscale = 10, .yscale = 42, .eq = 0}, /* 19.84 MHz */
+};
+
+/* General synth rate configuration table, in ascending order of rates */
+static struct frac_rate_tbl gen_rtbl[] = {
+	/* For vco1div4 = 250 MHz */
+	{.div = 0x1624E}, /* 22.5792 MHz */
+	{.div = 0x14585}, /* 24.576 MHz */
+	{.div = 0x14000}, /* 25 MHz */
+	{.div = 0x0B127}, /* 45.1584 MHz */
+	{.div = 0x0A000}, /* 50 MHz */
+	{.div = 0x061A8}, /* 81.92 MHz */
+	{.div = 0x05000}, /* 100 MHz */
+	{.div = 0x02800}, /* 200 MHz */
+	{.div = 0x02620}, /* 210 MHz */
+	{.div = 0x02460}, /* 220 MHz */
+	{.div = 0x022C0}, /* 230 MHz */
+	{.div = 0x02160}, /* 240 MHz */
+	{.div = 0x02000}, /* 250 MHz */
+};
+
+/* clock parents */
+static const char *vco_parents[] = { "osc_24m_clk", "osc_25m_clk", };
+static const char *sys_parents[] = { "none", "pll1_clk", "none", "none",
+	"sys_synth_clk", "none", "pll2_clk", "pll3_clk", };
+static const char *ahb_parents[] = { "cpu_div3_clk", "amba_synth_clk", };
+static const char *gpt_parents[] = { "osc_24m_clk", "apb_clk", };
+static const char *uart0_parents[] = { "pll5_clk", "osc_24m_clk",
+	"uart0_synth_gate_clk", };
+static const char *uart1_parents[] = { "pll5_clk", "osc_24m_clk",
+	"uart1_synth_gate_clk", };
+static const char *c3_parents[] = { "pll5_clk", "c3_synth_gate_clk", };
+static const char *gmac_phy_input_parents[] = { "gmii_125m_pad_clk", "pll2_clk",
+	"osc_25m_clk", };
+static const char *gmac_phy_parents[] = { "gmac_phy_input_mux_clk",
+	"gmac_phy_synth_gate_clk", };
+static const char *clcd_synth_parents[] = { "vco1div4_clk", "pll2_clk", };
+static const char *clcd_pixel_parents[] = { "pll5_clk", "clcd_synth_clk", };
+static const char *i2s_src_parents[] = { "vco1div2_clk", "pll2_clk", "pll3_clk",
+	"i2s_src_pad_clk", };
+static const char *i2s_ref_parents[] = { "i2s_src_mux_clk", "i2s_prs1_clk", };
+static const char *spdif_out_parents[] = { "i2s_src_pad_clk", "gen_synth2_clk",
+};
+static const char *spdif_in_parents[] = { "pll2_clk", "gen_synth3_clk", };
+
+static const char *gen_synth0_1_parents[] = { "vco1div4_clk", "vco3div2_clk",
+	"pll3_clk", };
+static const char *gen_synth2_3_parents[] = { "vco1div4_clk", "vco3div2_clk",
+	"pll2_clk", };
+
+void __init spear1340_clk_init(void)
+{
+	struct clk *clk, *clk1;
+
+	clk = clk_register_fixed_rate(NULL, "apb_pclk", NULL, CLK_IS_ROOT, 0);
+	clk_register_clkdev(clk, "apb_pclk", NULL);
+
+	clk = clk_register_fixed_rate(NULL, "osc_32k_clk", NULL, CLK_IS_ROOT,
+			32000);
+	clk_register_clkdev(clk, "osc_32k_clk", NULL);
+
+	clk = clk_register_fixed_rate(NULL, "osc_24m_clk", NULL, CLK_IS_ROOT,
+			24000000);
+	clk_register_clkdev(clk, "osc_24m_clk", NULL);
+
+	clk = clk_register_fixed_rate(NULL, "osc_25m_clk", NULL, CLK_IS_ROOT,
+			25000000);
+	clk_register_clkdev(clk, "osc_25m_clk", NULL);
+
+	clk = clk_register_fixed_rate(NULL, "gmii_125m_pad_clk", NULL,
+			CLK_IS_ROOT, 125000000);
+	clk_register_clkdev(clk, "gmii_125m_pad_clk", NULL);
+
+	clk = clk_register_fixed_rate(NULL, "i2s_src_pad_clk", NULL,
+			CLK_IS_ROOT, 12288000);
+	clk_register_clkdev(clk, "i2s_src_pad_clk", NULL);
+
+	/* clock derived from 32 KHz osc clk */
+	clk = clk_register_gate(NULL, "rtc-spear", "osc_32k_clk", 0,
+			SPEAR1340_PERIP1_CLK_ENB, SPEAR1340_RTC_CLK_ENB, 0,
+			&_lock);
+	clk_register_clkdev(clk, NULL, "fc900000.rtc");
+
+	/* clock derived from 24 or 25 MHz osc clk */
+	/* vco-pll */
+	clk = clk_register_mux(NULL, "vco1_mux_clk", vco_parents,
+			ARRAY_SIZE(vco_parents), 0, SPEAR1340_PLL_CFG,
+			SPEAR1340_PLL1_CLK_SHIFT, SPEAR1340_PLL_CLK_MASK, 0,
+			&_lock);
+	clk_register_clkdev(clk, "vco1_mux_clk", NULL);
+	clk = clk_register_vco_pll("vco1_clk", "pll1_clk", NULL, "vco1_mux_clk",
+			0, SPEAR1340_PLL1_CTR, SPEAR1340_PLL1_FRQ, pll_rtbl,
+			ARRAY_SIZE(pll_rtbl), &_lock, &clk1, NULL);
+	clk_register_clkdev(clk, "vco1_clk", NULL);
+	clk_register_clkdev(clk1, "pll1_clk", NULL);
+
+	clk = clk_register_mux(NULL, "vco2_mux_clk", vco_parents,
+			ARRAY_SIZE(vco_parents), 0, SPEAR1340_PLL_CFG,
+			SPEAR1340_PLL2_CLK_SHIFT, SPEAR1340_PLL_CLK_MASK, 0,
+			&_lock);
+	clk_register_clkdev(clk, "vco2_mux_clk", NULL);
+	clk = clk_register_vco_pll("vco2_clk", "pll2_clk", NULL, "vco2_mux_clk",
+			0, SPEAR1340_PLL2_CTR, SPEAR1340_PLL2_FRQ, pll_rtbl,
+			ARRAY_SIZE(pll_rtbl), &_lock, &clk1, NULL);
+	clk_register_clkdev(clk, "vco2_clk", NULL);
+	clk_register_clkdev(clk1, "pll2_clk", NULL);
+
+	clk = clk_register_mux(NULL, "vco3_mux_clk", vco_parents,
+			ARRAY_SIZE(vco_parents), 0, SPEAR1340_PLL_CFG,
+			SPEAR1340_PLL3_CLK_SHIFT, SPEAR1340_PLL_CLK_MASK, 0,
+			&_lock);
+	clk_register_clkdev(clk, "vco3_mux_clk", NULL);
+	clk = clk_register_vco_pll("vco3_clk", "pll3_clk", NULL, "vco3_mux_clk",
+			0, SPEAR1340_PLL3_CTR, SPEAR1340_PLL3_FRQ, pll_rtbl,
+			ARRAY_SIZE(pll_rtbl), &_lock, &clk1, NULL);
+	clk_register_clkdev(clk, "vco3_clk", NULL);
+	clk_register_clkdev(clk1, "pll3_clk", NULL);
+
+	clk = clk_register_vco_pll("vco4_clk", "pll4_clk", NULL, "osc_24m_clk",
+			0, SPEAR1340_PLL4_CTR, SPEAR1340_PLL4_FRQ, pll4_rtbl,
+			ARRAY_SIZE(pll4_rtbl), &_lock, &clk1, NULL);
+	clk_register_clkdev(clk, "vco4_clk", NULL);
+	clk_register_clkdev(clk1, "pll4_clk", NULL);
+
+	clk = clk_register_fixed_rate(NULL, "pll5_clk", "osc_24m_clk", 0,
+			48000000);
+	clk_register_clkdev(clk, "pll5_clk", NULL);
+
+	clk = clk_register_fixed_rate(NULL, "pll6_clk", "osc_25m_clk", 0,
+			25000000);
+	clk_register_clkdev(clk, "pll6_clk", NULL);
+
+	/* vco div n clocks */
+	clk = clk_register_fixed_factor(NULL, "vco1div2_clk", "vco1_clk", 0, 1,
+			2);
+	clk_register_clkdev(clk, "vco1div2_clk", NULL);
+
+	clk = clk_register_fixed_factor(NULL, "vco1div4_clk", "vco1_clk", 0, 1,
+			4);
+	clk_register_clkdev(clk, "vco1div4_clk", NULL);
+
+	clk = clk_register_fixed_factor(NULL, "vco2div2_clk", "vco2_clk", 0, 1,
+			2);
+	clk_register_clkdev(clk, "vco2div2_clk", NULL);
+
+	clk = clk_register_fixed_factor(NULL, "vco3div2_clk", "vco3_clk", 0, 1,
+			2);
+	clk_register_clkdev(clk, "vco3div2_clk", NULL);
+
+	/* peripherals */
+	clk_register_fixed_factor(NULL, "thermal_clk", "osc_24m_clk", 0, 1,
+			128);
+	clk = clk_register_gate(NULL, "thermal_gate_clk", "thermal_clk", 0,
+			SPEAR1340_PERIP2_CLK_ENB, SPEAR1340_THSENS_CLK_ENB, 0,
+			&_lock);
+	clk_register_clkdev(clk, NULL, "spear_thermal");
+
+	/* clock derived from pll4 clk */
+	clk = clk_register_fixed_factor(NULL, "ddr_clk", "pll4_clk", 0, 1,
+			1);
+	clk_register_clkdev(clk, "ddr_clk", NULL);
+
+	/* clock derived from pll1 clk */
+	clk = clk_register_frac("sys_synth_clk", "vco1div2_clk", 0,
+			SPEAR1340_SYS_CLK_SYNT, sys_synth_rtbl,
+			ARRAY_SIZE(sys_synth_rtbl), &_lock);
+	clk_register_clkdev(clk, "sys_synth_clk", NULL);
+
+	clk = clk_register_frac("amba_synth_clk", "vco1div2_clk", 0,
+			SPEAR1340_AMBA_CLK_SYNT, amba_synth_rtbl,
+			ARRAY_SIZE(amba_synth_rtbl), &_lock);
+	clk_register_clkdev(clk, "amba_synth_clk", NULL);
+
+	clk = clk_register_mux(NULL, "sys_mux_clk", sys_parents,
+			ARRAY_SIZE(sys_parents), 0, SPEAR1340_SYS_CLK_CTRL,
+			SPEAR1340_SCLK_SRC_SEL_SHIFT,
+			SPEAR1340_SCLK_SRC_SEL_MASK, 0, &_lock);
+	clk_register_clkdev(clk, "sys_clk", NULL);
+
+	clk = clk_register_fixed_factor(NULL, "cpu_clk", "sys_mux_clk", 0, 1,
+			2);
+	clk_register_clkdev(clk, "cpu_clk", NULL);
+
+	clk = clk_register_fixed_factor(NULL, "cpu_div3_clk", "cpu_clk", 0, 1,
+			3);
+	clk_register_clkdev(clk, "cpu_div3_clk", NULL);
+
+	clk = clk_register_fixed_factor(NULL, "wdt_clk", "cpu_clk", 0, 1,
+			2);
+	clk_register_clkdev(clk, NULL, "ec800620.wdt");
+
+	clk = clk_register_mux(NULL, "ahb_clk", ahb_parents,
+			ARRAY_SIZE(ahb_parents), 0, SPEAR1340_SYS_CLK_CTRL,
+			SPEAR1340_HCLK_SRC_SEL_SHIFT,
+			SPEAR1340_HCLK_SRC_SEL_MASK, 0, &_lock);
+	clk_register_clkdev(clk, "ahb_clk", NULL);
+
+	clk = clk_register_fixed_factor(NULL, "apb_clk", "ahb_clk", 0, 1,
+			2);
+	clk_register_clkdev(clk, "apb_clk", NULL);
+
+	/* gpt clocks */
+	clk = clk_register_mux(NULL, "gpt0_mux_clk", gpt_parents,
+			ARRAY_SIZE(gpt_parents), 0, SPEAR1340_PERIP_CLK_CFG,
+			SPEAR1340_GPT0_CLK_SHIFT, SPEAR1340_GPT_CLK_MASK, 0,
+			&_lock);
+	clk_register_clkdev(clk, "gpt0_mux_clk", NULL);
+	clk = clk_register_gate(NULL, "gpt0_clk", "gpt0_mux_clk", 0,
+			SPEAR1340_PERIP1_CLK_ENB, SPEAR1340_GPT0_CLK_ENB, 0,
+			&_lock);
+	clk_register_clkdev(clk, NULL, "gpt0");
+
+	clk = clk_register_mux(NULL, "gpt1_mux_clk", gpt_parents,
+			ARRAY_SIZE(gpt_parents), 0, SPEAR1340_PERIP_CLK_CFG,
+			SPEAR1340_GPT1_CLK_SHIFT, SPEAR1340_GPT_CLK_MASK, 0,
+			&_lock);
+	clk_register_clkdev(clk, "gpt1_mux_clk", NULL);
+	clk = clk_register_gate(NULL, "gpt1_clk", "gpt1_mux_clk", 0,
+			SPEAR1340_PERIP1_CLK_ENB, SPEAR1340_GPT1_CLK_ENB, 0,
+			&_lock);
+	clk_register_clkdev(clk, NULL, "gpt1");
+
+	clk = clk_register_mux(NULL, "gpt2_mux_clk", gpt_parents,
+			ARRAY_SIZE(gpt_parents), 0, SPEAR1340_PERIP_CLK_CFG,
+			SPEAR1340_GPT2_CLK_SHIFT, SPEAR1340_GPT_CLK_MASK, 0,
+			&_lock);
+	clk_register_clkdev(clk, "gpt2_mux_clk", NULL);
+	clk = clk_register_gate(NULL, "gpt2_clk", "gpt2_mux_clk", 0,
+			SPEAR1340_PERIP2_CLK_ENB, SPEAR1340_GPT2_CLK_ENB, 0,
+			&_lock);
+	clk_register_clkdev(clk, NULL, "gpt2");
+
+	clk = clk_register_mux(NULL, "gpt3_mux_clk", gpt_parents,
+			ARRAY_SIZE(gpt_parents), 0, SPEAR1340_PERIP_CLK_CFG,
+			SPEAR1340_GPT3_CLK_SHIFT, SPEAR1340_GPT_CLK_MASK, 0,
+			&_lock);
+	clk_register_clkdev(clk, "gpt3_mux_clk", NULL);
+	clk = clk_register_gate(NULL, "gpt3_clk", "gpt3_mux_clk", 0,
+			SPEAR1340_PERIP2_CLK_ENB, SPEAR1340_GPT3_CLK_ENB, 0,
+			&_lock);
+	clk_register_clkdev(clk, NULL, "gpt3");
+
+	/* others */
+	clk = clk_register_aux("uart0_synth_clk", "uart0_synth_gate_clk",
+			"vco1div2_clk", 0, SPEAR1340_UART0_CLK_SYNT, NULL,
+			aux_rtbl, ARRAY_SIZE(aux_rtbl), &_lock, &clk1);
+	clk_register_clkdev(clk, "uart0_synth_clk", NULL);
+	clk_register_clkdev(clk1, "uart0_synth_gate_clk", NULL);
+
+	clk = clk_register_mux(NULL, "uart0_mux_clk", uart0_parents,
+			ARRAY_SIZE(uart0_parents), 0, SPEAR1340_PERIP_CLK_CFG,
+			SPEAR1340_UART0_CLK_SHIFT, SPEAR1340_UART_CLK_MASK, 0,
+			&_lock);
+	clk_register_clkdev(clk, "uart0_mux_clk", NULL);
+
+	clk = clk_register_gate(NULL, "uart0_clk", "uart0_mux_clk", 0,
+			SPEAR1340_PERIP1_CLK_ENB, SPEAR1340_UART0_CLK_ENB, 0,
+			&_lock);
+	clk_register_clkdev(clk, NULL, "e0000000.serial");
+
+	clk = clk_register_aux("uart1_synth_clk", "uart1_synth_gate_clk",
+			"vco1div2_clk", 0, SPEAR1340_UART1_CLK_SYNT, NULL,
+			aux_rtbl, ARRAY_SIZE(aux_rtbl), &_lock, &clk1);
+	clk_register_clkdev(clk, "uart1_synth_clk", NULL);
+	clk_register_clkdev(clk1, "uart1_synth_gate_clk", NULL);
+
+	clk = clk_register_mux(NULL, "uart1_mux_clk", uart1_parents,
+			ARRAY_SIZE(uart1_parents), 0, SPEAR1340_PERIP_CLK_CFG,
+			SPEAR1340_UART1_CLK_SHIFT, SPEAR1340_UART_CLK_MASK, 0,
+			&_lock);
+	clk_register_clkdev(clk, "uart1_mux_clk", NULL);
+
+	clk = clk_register_gate(NULL, "uart1_clk", "uart1_mux_clk", 0,
+			SPEAR1340_PERIP1_CLK_ENB, SPEAR1340_UART1_CLK_ENB, 0,
+			&_lock);
+	clk_register_clkdev(clk, NULL, "b4100000.serial");
+
+	clk = clk_register_aux("sdhci_synth_clk", "sdhci_synth_gate_clk",
+			"vco1div2_clk", 0, SPEAR1340_SDHCI_CLK_SYNT, NULL,
+			aux_rtbl, ARRAY_SIZE(aux_rtbl), &_lock, &clk1);
+	clk_register_clkdev(clk, "sdhci_synth_clk", NULL);
+	clk_register_clkdev(clk1, "sdhci_synth_gate_clk", NULL);
+
+	clk = clk_register_gate(NULL, "sdhci_clk", "sdhci_synth_gate_clk", 0,
+			SPEAR1340_PERIP1_CLK_ENB, SPEAR1340_SDHCI_CLK_ENB, 0,
+			&_lock);
+	clk_register_clkdev(clk, NULL, "b3000000.sdhci");
+
+	clk = clk_register_aux("cfxd_synth_clk", "cfxd_synth_gate_clk",
+			"vco1div2_clk", 0, SPEAR1340_CFXD_CLK_SYNT, NULL,
+			aux_rtbl, ARRAY_SIZE(aux_rtbl), &_lock, &clk1);
+	clk_register_clkdev(clk, "cfxd_synth_clk", NULL);
+	clk_register_clkdev(clk1, "cfxd_synth_gate_clk", NULL);
+
+	clk = clk_register_gate(NULL, "cfxd_clk", "cfxd_synth_gate_clk", 0,
+			SPEAR1340_PERIP1_CLK_ENB, SPEAR1340_CFXD_CLK_ENB, 0,
+			&_lock);
+	clk_register_clkdev(clk, NULL, "b2800000.cf");
+	clk_register_clkdev(clk, NULL, "arasan_xd");
+
+	clk = clk_register_aux("c3_synth_clk", "c3_synth_gate_clk",
+			"vco1div2_clk", 0, SPEAR1340_C3_CLK_SYNT, NULL,
+			aux_rtbl, ARRAY_SIZE(aux_rtbl), &_lock, &clk1);
+	clk_register_clkdev(clk, "c3_synth_clk", NULL);
+	clk_register_clkdev(clk1, "c3_synth_gate_clk", NULL);
+
+	clk = clk_register_mux(NULL, "c3_mux_clk", c3_parents,
+			ARRAY_SIZE(c3_parents), 0, SPEAR1340_PERIP_CLK_CFG,
+			SPEAR1340_C3_CLK_SHIFT, SPEAR1340_C3_CLK_MASK, 0,
+			&_lock);
+	clk_register_clkdev(clk, "c3_mux_clk", NULL);
+
+	clk = clk_register_gate(NULL, "c3_clk", "c3_mux_clk", 0,
+			SPEAR1340_PERIP1_CLK_ENB, SPEAR1340_C3_CLK_ENB, 0,
+			&_lock);
+	clk_register_clkdev(clk, NULL, "c3");
+
+	/* gmac */
+	clk = clk_register_mux(NULL, "gmac_phy_input_mux_clk",
+			gmac_phy_input_parents,
+			ARRAY_SIZE(gmac_phy_input_parents), 0,
+			SPEAR1340_GMAC_CLK_CFG,
+			SPEAR1340_GMAC_PHY_INPUT_CLK_SHIFT,
+			SPEAR1340_GMAC_PHY_INPUT_CLK_MASK, 0, &_lock);
+	clk_register_clkdev(clk, "gmac_phy_input_mux_clk", NULL);
+
+	clk = clk_register_aux("gmac_phy_synth_clk", "gmac_phy_synth_gate_clk",
+			"gmac_phy_input_mux_clk", 0, SPEAR1340_GMAC_CLK_SYNT,
+			NULL, gmac_rtbl, ARRAY_SIZE(gmac_rtbl), &_lock, &clk1);
+	clk_register_clkdev(clk, "gmac_phy_synth_clk", NULL);
+	clk_register_clkdev(clk1, "gmac_phy_synth_gate_clk", NULL);
+
+	clk = clk_register_mux(NULL, "gmac_phy_mux_clk", gmac_phy_parents,
+			ARRAY_SIZE(gmac_phy_parents), 0,
+			SPEAR1340_PERIP_CLK_CFG, SPEAR1340_GMAC_PHY_CLK_SHIFT,
+			SPEAR1340_GMAC_PHY_CLK_MASK, 0, &_lock);
+	clk_register_clkdev(clk, NULL, "stmmacphy.0");
+
+	/* clcd */
+	clk = clk_register_mux(NULL, "clcd_synth_mux_clk", clcd_synth_parents,
+			ARRAY_SIZE(clcd_synth_parents), 0,
+			SPEAR1340_CLCD_CLK_SYNT, SPEAR1340_CLCD_SYNT_CLK_SHIFT,
+			SPEAR1340_CLCD_SYNT_CLK_MASK, 0, &_lock);
+	clk_register_clkdev(clk, "clcd_synth_mux_clk", NULL);
+
+	clk = clk_register_frac("clcd_synth_clk", "clcd_synth_mux_clk", 0,
+			SPEAR1340_CLCD_CLK_SYNT, clcd_rtbl,
+			ARRAY_SIZE(clcd_rtbl), &_lock);
+	clk_register_clkdev(clk, "clcd_synth_clk", NULL);
+
+	clk = clk_register_mux(NULL, "clcd_pixel_mux_clk", clcd_pixel_parents,
+			ARRAY_SIZE(clcd_pixel_parents), 0,
+			SPEAR1340_PERIP_CLK_CFG, SPEAR1340_CLCD_CLK_SHIFT,
+			SPEAR1340_CLCD_CLK_MASK, 0, &_lock);
+	clk_register_clkdev(clk, "clcd_pixel_clk", NULL);
+
+	clk = clk_register_gate(NULL, "clcd_clk", "clcd_pixel_mux_clk", 0,
+			SPEAR1340_PERIP1_CLK_ENB, SPEAR1340_CLCD_CLK_ENB, 0,
+			&_lock);
+	clk_register_clkdev(clk, "clcd_clk", NULL);
+
+	/* i2s */
+	clk = clk_register_mux(NULL, "i2s_src_mux_clk", i2s_src_parents,
+			ARRAY_SIZE(i2s_src_parents), 0, SPEAR1340_I2S_CLK_CFG,
+			SPEAR1340_I2S_SRC_CLK_SHIFT, SPEAR1340_I2S_SRC_CLK_MASK,
+			0, &_lock);
+	clk_register_clkdev(clk, "i2s_src_clk", NULL);
+
+	clk = clk_register_aux("i2s_prs1_clk", NULL, "i2s_src_mux_clk", 0,
+			SPEAR1340_I2S_CLK_CFG, &i2s_prs1_masks, i2s_prs1_rtbl,
+			ARRAY_SIZE(i2s_prs1_rtbl), &_lock, NULL);
+	clk_register_clkdev(clk, "i2s_prs1_clk", NULL);
+
+	clk = clk_register_mux(NULL, "i2s_ref_mux_clk", i2s_ref_parents,
+			ARRAY_SIZE(i2s_ref_parents), 0, SPEAR1340_I2S_CLK_CFG,
+			SPEAR1340_I2S_REF_SHIFT, SPEAR1340_I2S_REF_SEL_MASK, 0,
+			&_lock);
+	clk_register_clkdev(clk, "i2s_ref_clk", NULL);
+
+	clk = clk_register_gate(NULL, "i2s_ref_pad_clk", "i2s_ref_mux_clk", 0,
+			SPEAR1340_PERIP2_CLK_ENB, SPEAR1340_I2S_REF_PAD_CLK_ENB,
+			0, &_lock);
+	clk_register_clkdev(clk, "i2s_ref_pad_clk", NULL);
+
+	clk = clk_register_aux("i2s_sclk_clk", "i2s_sclk_gate_clk",
+			"i2s_ref_mux_clk", 0, SPEAR1340_I2S_CLK_CFG,
+			&i2s_sclk_masks, i2s_sclk_rtbl,
+			ARRAY_SIZE(i2s_sclk_rtbl), &_lock, &clk1);
+	clk_register_clkdev(clk, "i2s_sclk_clk", NULL);
+	clk_register_clkdev(clk1, "i2s_sclk_gate_clk", NULL);
+
+	/* clock derived from ahb clk */
+	clk = clk_register_gate(NULL, "i2c0_clk", "ahb_clk", 0,
+			SPEAR1340_PERIP1_CLK_ENB, SPEAR1340_I2C0_CLK_ENB, 0,
+			&_lock);
+	clk_register_clkdev(clk, NULL, "e0280000.i2c");
+
+	clk = clk_register_gate(NULL, "i2c1_clk", "ahb_clk", 0,
+			SPEAR1340_PERIP1_CLK_ENB, SPEAR1340_I2C1_CLK_ENB, 0,
+			&_lock);
+	clk_register_clkdev(clk, NULL, "b4000000.i2c");
+
+	clk = clk_register_gate(NULL, "dma_clk", "ahb_clk", 0,
+			SPEAR1340_PERIP1_CLK_ENB, SPEAR1340_DMA_CLK_ENB, 0,
+			&_lock);
+	clk_register_clkdev(clk, NULL, "ea800000.dma");
+	clk_register_clkdev(clk, NULL, "eb000000.dma");
+
+	clk = clk_register_gate(NULL, "gmac_clk", "ahb_clk", 0,
+			SPEAR1340_PERIP1_CLK_ENB, SPEAR1340_GMAC_CLK_ENB, 0,
+			&_lock);
+	clk_register_clkdev(clk, NULL, "e2000000.eth");
+
+	clk = clk_register_gate(NULL, "fsmc_clk", "ahb_clk", 0,
+			SPEAR1340_PERIP1_CLK_ENB, SPEAR1340_FSMC_CLK_ENB, 0,
+			&_lock);
+	clk_register_clkdev(clk, NULL, "b0000000.flash");
+
+	clk = clk_register_gate(NULL, "smi_clk", "ahb_clk", 0,
+			SPEAR1340_PERIP1_CLK_ENB, SPEAR1340_SMI_CLK_ENB, 0,
+			&_lock);
+	clk_register_clkdev(clk, NULL, "ea000000.flash");
+
+	clk = clk_register_gate(NULL, "usbh0_clk", "ahb_clk", 0,
+			SPEAR1340_PERIP1_CLK_ENB, SPEAR1340_UHC0_CLK_ENB, 0,
+			&_lock);
+	clk_register_clkdev(clk, "usbh.0_clk", NULL);
+
+	clk = clk_register_gate(NULL, "usbh1_clk", "ahb_clk", 0,
+			SPEAR1340_PERIP1_CLK_ENB, SPEAR1340_UHC1_CLK_ENB, 0,
+			&_lock);
+	clk_register_clkdev(clk, "usbh.1_clk", NULL);
+
+	clk = clk_register_gate(NULL, "uoc_clk", "ahb_clk", 0,
+			SPEAR1340_PERIP1_CLK_ENB, SPEAR1340_UOC_CLK_ENB, 0,
+			&_lock);
+	clk_register_clkdev(clk, NULL, "uoc");
+
+	clk = clk_register_gate(NULL, "pcie_sata_clk", "ahb_clk", 0,
+			SPEAR1340_PERIP1_CLK_ENB, SPEAR1340_PCIE_SATA_CLK_ENB,
+			0, &_lock);
+	clk_register_clkdev(clk, NULL, "dw_pcie");
+	clk_register_clkdev(clk, NULL, "ahci");
+
+	clk = clk_register_gate(NULL, "sysram0_clk", "ahb_clk", 0,
+			SPEAR1340_PERIP1_CLK_ENB, SPEAR1340_SYSRAM0_CLK_ENB, 0,
+			&_lock);
+	clk_register_clkdev(clk, "sysram0_clk", NULL);
+
+	clk = clk_register_gate(NULL, "sysram1_clk", "ahb_clk", 0,
+			SPEAR1340_PERIP1_CLK_ENB, SPEAR1340_SYSRAM1_CLK_ENB, 0,
+			&_lock);
+	clk_register_clkdev(clk, "sysram1_clk", NULL);
+
+	clk = clk_register_aux("adc_synth_clk", "adc_synth_gate_clk", "ahb_clk",
+			0, SPEAR1340_ADC_CLK_SYNT, NULL, adc_rtbl,
+			ARRAY_SIZE(adc_rtbl), &_lock, &clk1);
+	clk_register_clkdev(clk, "adc_synth_clk", NULL);
+	clk_register_clkdev(clk1, "adc_synth_gate_clk", NULL);
+
+	clk = clk_register_gate(NULL, "adc_clk", "adc_synth_gate_clk", 0,
+			SPEAR1340_PERIP1_CLK_ENB, SPEAR1340_ADC_CLK_ENB, 0,
+			&_lock);
+	clk_register_clkdev(clk, NULL, "adc_clk");
+
+	/* clock derived from apb clk */
+	clk = clk_register_gate(NULL, "ssp_clk", "apb_clk", 0,
+			SPEAR1340_PERIP1_CLK_ENB, SPEAR1340_SSP_CLK_ENB, 0,
+			&_lock);
+	clk_register_clkdev(clk, NULL, "e0100000.spi");
+
+	clk = clk_register_gate(NULL, "gpio0_clk", "apb_clk", 0,
+			SPEAR1340_PERIP1_CLK_ENB, SPEAR1340_GPIO0_CLK_ENB, 0,
+			&_lock);
+	clk_register_clkdev(clk, NULL, "e0600000.gpio");
+
+	clk = clk_register_gate(NULL, "gpio1_clk", "apb_clk", 0,
+			SPEAR1340_PERIP1_CLK_ENB, SPEAR1340_GPIO1_CLK_ENB, 0,
+			&_lock);
+	clk_register_clkdev(clk, NULL, "e0680000.gpio");
+
+	clk = clk_register_gate(NULL, "i2s_play_clk", "apb_clk", 0,
+			SPEAR1340_PERIP1_CLK_ENB, SPEAR1340_I2S_PLAY_CLK_ENB, 0,
+			&_lock);
+	clk_register_clkdev(clk, NULL, "b2400000.i2s");
+
+	clk = clk_register_gate(NULL, "i2s_rec_clk", "apb_clk", 0,
+			SPEAR1340_PERIP1_CLK_ENB, SPEAR1340_I2S_REC_CLK_ENB, 0,
+			&_lock);
+	clk_register_clkdev(clk, NULL, "b2000000.i2s");
+
+	clk = clk_register_gate(NULL, "kbd_clk", "apb_clk", 0,
+			SPEAR1340_PERIP2_CLK_ENB, SPEAR1340_KBD_CLK_ENB, 0,
+			&_lock);
+	clk_register_clkdev(clk, NULL, "e0300000.kbd");
+
+	/* RAS clks */
+	clk = clk_register_mux(NULL, "gen_synth0_1_mux_clk",
+			gen_synth0_1_parents, ARRAY_SIZE(gen_synth0_1_parents),
+			0, SPEAR1340_PLL_CFG, SPEAR1340_GEN_SYNT0_1_CLK_SHIFT,
+			SPEAR1340_GEN_SYNT_CLK_MASK, 0, &_lock);
+	clk_register_clkdev(clk, "gen_synth0_1_clk", NULL);
+
+	clk = clk_register_mux(NULL, "gen_synth2_3_mux_clk",
+			gen_synth2_3_parents, ARRAY_SIZE(gen_synth2_3_parents),
+			0, SPEAR1340_PLL_CFG, SPEAR1340_GEN_SYNT2_3_CLK_SHIFT,
+			SPEAR1340_GEN_SYNT_CLK_MASK, 0, &_lock);
+	clk_register_clkdev(clk, "gen_synth2_3_clk", NULL);
+
+	clk = clk_register_frac("gen_synth0_clk", "gen_synth0_1_clk", 0,
+			SPEAR1340_GEN_CLK_SYNT0, gen_rtbl, ARRAY_SIZE(gen_rtbl),
+			&_lock);
+	clk_register_clkdev(clk, "gen_synth0_clk", NULL);
+
+	clk = clk_register_frac("gen_synth1_clk", "gen_synth0_1_clk", 0,
+			SPEAR1340_GEN_CLK_SYNT1, gen_rtbl, ARRAY_SIZE(gen_rtbl),
+			&_lock);
+	clk_register_clkdev(clk, "gen_synth1_clk", NULL);
+
+	clk = clk_register_frac("gen_synth2_clk", "gen_synth2_3_clk", 0,
+			SPEAR1340_GEN_CLK_SYNT2, gen_rtbl, ARRAY_SIZE(gen_rtbl),
+			&_lock);
+	clk_register_clkdev(clk, "gen_synth2_clk", NULL);
+
+	clk = clk_register_frac("gen_synth3_clk", "gen_synth2_3_clk", 0,
+			SPEAR1340_GEN_CLK_SYNT3, gen_rtbl, ARRAY_SIZE(gen_rtbl),
+			&_lock);
+	clk_register_clkdev(clk, "gen_synth3_clk", NULL);
+
+	clk = clk_register_gate(NULL, "mali_clk", "gen_synth3_clk", 0,
+			SPEAR1340_PERIP3_CLK_ENB, SPEAR1340_MALI_CLK_ENB, 0,
+			&_lock);
+	clk_register_clkdev(clk, NULL, "mali");
+
+	clk = clk_register_gate(NULL, "cec0_clk", "ahb_clk", 0,
+			SPEAR1340_PERIP3_CLK_ENB, SPEAR1340_CEC0_CLK_ENB, 0,
+			&_lock);
+	clk_register_clkdev(clk, NULL, "spear_cec.0");
+
+	clk = clk_register_gate(NULL, "cec1_clk", "ahb_clk", 0,
+			SPEAR1340_PERIP3_CLK_ENB, SPEAR1340_CEC1_CLK_ENB, 0,
+			&_lock);
+	clk_register_clkdev(clk, NULL, "spear_cec.1");
+
+	clk = clk_register_mux(NULL, "spdif_out_mux_clk", spdif_out_parents,
+			ARRAY_SIZE(spdif_out_parents), 0,
+			SPEAR1340_PERIP_CLK_CFG, SPEAR1340_SPDIF_OUT_CLK_SHIFT,
+			SPEAR1340_SPDIF_CLK_MASK, 0, &_lock);
+	clk_register_clkdev(clk, "spdif_out_mux_clk", NULL);
+
+	clk = clk_register_gate(NULL, "spdif_out_clk", "spdif_out_mux_clk", 0,
+			SPEAR1340_PERIP3_CLK_ENB, SPEAR1340_SPDIF_OUT_CLK_ENB,
+			0, &_lock);
+	clk_register_clkdev(clk, NULL, "spdif-out");
+
+	clk = clk_register_mux(NULL, "spdif_in_mux_clk", spdif_in_parents,
+			ARRAY_SIZE(spdif_in_parents), 0,
+			SPEAR1340_PERIP_CLK_CFG, SPEAR1340_SPDIF_IN_CLK_SHIFT,
+			SPEAR1340_SPDIF_CLK_MASK, 0, &_lock);
+	clk_register_clkdev(clk, "spdif_in_mux_clk", NULL);
+
+	clk = clk_register_gate(NULL, "spdif_in_clk", "spdif_in_mux_clk", 0,
+			SPEAR1340_PERIP3_CLK_ENB, SPEAR1340_SPDIF_IN_CLK_ENB, 0,
+			&_lock);
+	clk_register_clkdev(clk, NULL, "spdif-in");
+
+	clk = clk_register_gate(NULL, "acp_clk", "acp_mux_clk", 0,
+			SPEAR1340_PERIP2_CLK_ENB, SPEAR1340_ACP_CLK_ENB, 0,
+			&_lock);
+	clk_register_clkdev(clk, NULL, "acp_clk");
+
+	clk = clk_register_gate(NULL, "plgpio_clk", "plgpio_mux_clk", 0,
+			SPEAR1340_PERIP3_CLK_ENB, SPEAR1340_PLGPIO_CLK_ENB, 0,
+			&_lock);
+	clk_register_clkdev(clk, NULL, "plgpio");
+
+	clk = clk_register_gate(NULL, "video_dec_clk", "video_dec_mux_clk", 0,
+			SPEAR1340_PERIP3_CLK_ENB, SPEAR1340_VIDEO_DEC_CLK_ENB,
+			0, &_lock);
+	clk_register_clkdev(clk, NULL, "video_dec");
+
+	clk = clk_register_gate(NULL, "video_enc_clk", "video_enc_mux_clk", 0,
+			SPEAR1340_PERIP3_CLK_ENB, SPEAR1340_VIDEO_ENC_CLK_ENB,
+			0, &_lock);
+	clk_register_clkdev(clk, NULL, "video_enc");
+
+	clk = clk_register_gate(NULL, "video_in_clk", "video_in_mux_clk", 0,
+			SPEAR1340_PERIP3_CLK_ENB, SPEAR1340_VIDEO_IN_CLK_ENB, 0,
+			&_lock);
+	clk_register_clkdev(clk, NULL, "spear_vip");
+
+	clk = clk_register_gate(NULL, "cam0_clk", "cam0_mux_clk", 0,
+			SPEAR1340_PERIP3_CLK_ENB, SPEAR1340_CAM0_CLK_ENB, 0,
+			&_lock);
+	clk_register_clkdev(clk, NULL, "spear_camif.0");
+
+	clk = clk_register_gate(NULL, "cam1_clk", "cam1_mux_clk", 0,
+			SPEAR1340_PERIP3_CLK_ENB, SPEAR1340_CAM1_CLK_ENB, 0,
+			&_lock);
+	clk_register_clkdev(clk, NULL, "spear_camif.1");
+
+	clk = clk_register_gate(NULL, "cam2_clk", "cam2_mux_clk", 0,
+			SPEAR1340_PERIP3_CLK_ENB, SPEAR1340_CAM2_CLK_ENB, 0,
+			&_lock);
+	clk_register_clkdev(clk, NULL, "spear_camif.2");
+
+	clk = clk_register_gate(NULL, "cam3_clk", "cam3_mux_clk", 0,
+			SPEAR1340_PERIP3_CLK_ENB, SPEAR1340_CAM3_CLK_ENB, 0,
+			&_lock);
+	clk_register_clkdev(clk, NULL, "spear_camif.3");
+
+	clk = clk_register_gate(NULL, "pwm_clk", "pwm_mux_clk", 0,
+			SPEAR1340_PERIP3_CLK_ENB, SPEAR1340_PWM_CLK_ENB, 0,
+			&_lock);
+	clk_register_clkdev(clk, NULL, "pwm");
+}

drivers/gpio/gpio-samsung.c

@@ -2452,6 +2452,12 @@ static struct samsung_gpio_chip exynos5_gpios_1[] = {
 			.ngpio	= EXYNOS5_GPIO_C3_NR,
 			.label	= "GPC3",
 		},
+	}, {
+		.chip	= {
+			.base	= EXYNOS5_GPC4(0),
+			.ngpio	= EXYNOS5_GPIO_C4_NR,
+			.label	= "GPC4",
+		},
 	}, {
 		.chip	= {
 			.base	= EXYNOS5_GPD0(0),
@@ -2826,8 +2832,11 @@ static __init void exynos5_gpiolib_init(void)
 		goto err_ioremap1;
 	}
 
+	/* need to set base address for gpc4 */
+	exonys5_gpios_1[11].base = gpio_base1 + 0x2E0;
+
 	/* need to set base address for gpx */
-	chip = &exynos5_gpios_1[20];
+	chip = &exynos5_gpios_1[21];
 	gpx_base = gpio_base1 + 0xC00;
 	for (i = 0; i < 4; i++, chip++, gpx_base += 0x20)
 		chip->base = gpx_base;

drivers/pinctrl/spear/Kconfig

@@ -31,4 +31,14 @@ config PINCTRL_SPEAR320
 	depends on MACH_SPEAR320
 	select PINCTRL_SPEAR3XX
 
+config PINCTRL_SPEAR1310
+	bool "ST Microelectronics SPEAr1310 SoC pin controller driver"
+	depends on MACH_SPEAR1310
+	select PINCTRL_SPEAR
+
+config PINCTRL_SPEAR1340
+	bool "ST Microelectronics SPEAr1340 SoC pin controller driver"
+	depends on MACH_SPEAR1340
+	select PINCTRL_SPEAR
+
 endif

drivers/pinctrl/spear/Makefile

@@ -5,3 +5,5 @@ obj-$(CONFIG_PINCTRL_SPEAR3XX)	+= pinctrl-spear3xx.o
 obj-$(CONFIG_PINCTRL_SPEAR300)	+= pinctrl-spear300.o
 obj-$(CONFIG_PINCTRL_SPEAR310)	+= pinctrl-spear310.o
 obj-$(CONFIG_PINCTRL_SPEAR320)	+= pinctrl-spear320.o
+obj-$(CONFIG_PINCTRL_SPEAR1310)	+= pinctrl-spear1310.o
+obj-$(CONFIG_PINCTRL_SPEAR1340)	+= pinctrl-spear1340.o

drivers/pinctrl/spear/pinctrl-spear.h

@@ -139,4 +139,255 @@ void __devinit pmx_init_addr(struct spear_pinctrl_machdata *machdata, u16 reg);
 int __devinit spear_pinctrl_probe(struct platform_device *pdev,
 		struct spear_pinctrl_machdata *machdata);
 int __devexit spear_pinctrl_remove(struct platform_device *pdev);
+
+#define SPEAR_PIN_0_TO_101		\
+	PINCTRL_PIN(0, "PLGPIO0"),	\
+	PINCTRL_PIN(1, "PLGPIO1"),	\
+	PINCTRL_PIN(2, "PLGPIO2"),	\
+	PINCTRL_PIN(3, "PLGPIO3"),	\
+	PINCTRL_PIN(4, "PLGPIO4"),	\
+	PINCTRL_PIN(5, "PLGPIO5"),	\
+	PINCTRL_PIN(6, "PLGPIO6"),	\
+	PINCTRL_PIN(7, "PLGPIO7"),	\
+	PINCTRL_PIN(8, "PLGPIO8"),	\
+	PINCTRL_PIN(9, "PLGPIO9"),	\
+	PINCTRL_PIN(10, "PLGPIO10"),	\
+	PINCTRL_PIN(11, "PLGPIO11"),	\
+	PINCTRL_PIN(12, "PLGPIO12"),	\
+	PINCTRL_PIN(13, "PLGPIO13"),	\
+	PINCTRL_PIN(14, "PLGPIO14"),	\
+	PINCTRL_PIN(15, "PLGPIO15"),	\
+	PINCTRL_PIN(16, "PLGPIO16"),	\
+	PINCTRL_PIN(17, "PLGPIO17"),	\
+	PINCTRL_PIN(18, "PLGPIO18"),	\
+	PINCTRL_PIN(19, "PLGPIO19"),	\
+	PINCTRL_PIN(20, "PLGPIO20"),	\
+	PINCTRL_PIN(21, "PLGPIO21"),	\
+	PINCTRL_PIN(22, "PLGPIO22"),	\
+	PINCTRL_PIN(23, "PLGPIO23"),	\
+	PINCTRL_PIN(24, "PLGPIO24"),	\
+	PINCTRL_PIN(25, "PLGPIO25"),	\
+	PINCTRL_PIN(26, "PLGPIO26"),	\
+	PINCTRL_PIN(27, "PLGPIO27"),	\
+	PINCTRL_PIN(28, "PLGPIO28"),	\
+	PINCTRL_PIN(29, "PLGPIO29"),	\
+	PINCTRL_PIN(30, "PLGPIO30"),	\
+	PINCTRL_PIN(31, "PLGPIO31"),	\
+	PINCTRL_PIN(32, "PLGPIO32"),	\
+	PINCTRL_PIN(33, "PLGPIO33"),	\
+	PINCTRL_PIN(34, "PLGPIO34"),	\
+	PINCTRL_PIN(35, "PLGPIO35"),	\
+	PINCTRL_PIN(36, "PLGPIO36"),	\
+	PINCTRL_PIN(37, "PLGPIO37"),	\
+	PINCTRL_PIN(38, "PLGPIO38"),	\
+	PINCTRL_PIN(39, "PLGPIO39"),	\
+	PINCTRL_PIN(40, "PLGPIO40"),	\
+	PINCTRL_PIN(41, "PLGPIO41"),	\
+	PINCTRL_PIN(42, "PLGPIO42"),	\
+	PINCTRL_PIN(43, "PLGPIO43"),	\
+	PINCTRL_PIN(44, "PLGPIO44"),	\
+	PINCTRL_PIN(45, "PLGPIO45"),	\
+	PINCTRL_PIN(46, "PLGPIO46"),	\
+	PINCTRL_PIN(47, "PLGPIO47"),	\
+	PINCTRL_PIN(48, "PLGPIO48"),	\
+	PINCTRL_PIN(49, "PLGPIO49"),	\
+	PINCTRL_PIN(50, "PLGPIO50"),	\
+	PINCTRL_PIN(51, "PLGPIO51"),	\
+	PINCTRL_PIN(52, "PLGPIO52"),	\
+	PINCTRL_PIN(53, "PLGPIO53"),	\
+	PINCTRL_PIN(54, "PLGPIO54"),	\
+	PINCTRL_PIN(55, "PLGPIO55"),	\
+	PINCTRL_PIN(56, "PLGPIO56"),	\
+	PINCTRL_PIN(57, "PLGPIO57"),	\
+	PINCTRL_PIN(58, "PLGPIO58"),	\
+	PINCTRL_PIN(59, "PLGPIO59"),	\
+	PINCTRL_PIN(60, "PLGPIO60"),	\
+	PINCTRL_PIN(61, "PLGPIO61"),	\
+	PINCTRL_PIN(62, "PLGPIO62"),	\
+	PINCTRL_PIN(63, "PLGPIO63"),	\
+	PINCTRL_PIN(64, "PLGPIO64"),	\
+	PINCTRL_PIN(65, "PLGPIO65"),	\
+	PINCTRL_PIN(66, "PLGPIO66"),	\
+	PINCTRL_PIN(67, "PLGPIO67"),	\
+	PINCTRL_PIN(68, "PLGPIO68"),	\
+	PINCTRL_PIN(69, "PLGPIO69"),	\
+	PINCTRL_PIN(70, "PLGPIO70"),	\
+	PINCTRL_PIN(71, "PLGPIO71"),	\
+	PINCTRL_PIN(72, "PLGPIO72"),	\
+	PINCTRL_PIN(73, "PLGPIO73"),	\
+	PINCTRL_PIN(74, "PLGPIO74"),	\
+	PINCTRL_PIN(75, "PLGPIO75"),	\
+	PINCTRL_PIN(76, "PLGPIO76"),	\
+	PINCTRL_PIN(77, "PLGPIO77"),	\
+	PINCTRL_PIN(78, "PLGPIO78"),	\
+	PINCTRL_PIN(79, "PLGPIO79"),	\
+	PINCTRL_PIN(80, "PLGPIO80"),	\
+	PINCTRL_PIN(81, "PLGPIO81"),	\
+	PINCTRL_PIN(82, "PLGPIO82"),	\
+	PINCTRL_PIN(83, "PLGPIO83"),	\
+	PINCTRL_PIN(84, "PLGPIO84"),	\
+	PINCTRL_PIN(85, "PLGPIO85"),	\
+	PINCTRL_PIN(86, "PLGPIO86"),	\
+	PINCTRL_PIN(87, "PLGPIO87"),	\
+	PINCTRL_PIN(88, "PLGPIO88"),	\
+	PINCTRL_PIN(89, "PLGPIO89"),	\
+	PINCTRL_PIN(90, "PLGPIO90"),	\
+	PINCTRL_PIN(91, "PLGPIO91"),	\
+	PINCTRL_PIN(92, "PLGPIO92"),	\
+	PINCTRL_PIN(93, "PLGPIO93"),	\
+	PINCTRL_PIN(94, "PLGPIO94"),	\
+	PINCTRL_PIN(95, "PLGPIO95"),	\
+	PINCTRL_PIN(96, "PLGPIO96"),	\
+	PINCTRL_PIN(97, "PLGPIO97"),	\
+	PINCTRL_PIN(98, "PLGPIO98"),	\
+	PINCTRL_PIN(99, "PLGPIO99"),	\
+	PINCTRL_PIN(100, "PLGPIO100"),	\
+	PINCTRL_PIN(101, "PLGPIO101")
+
+#define SPEAR_PIN_102_TO_245		\
+	PINCTRL_PIN(102, "PLGPIO102"),	\
+	PINCTRL_PIN(103, "PLGPIO103"),	\
+	PINCTRL_PIN(104, "PLGPIO104"),	\
+	PINCTRL_PIN(105, "PLGPIO105"),	\
+	PINCTRL_PIN(106, "PLGPIO106"),	\
+	PINCTRL_PIN(107, "PLGPIO107"),	\
+	PINCTRL_PIN(108, "PLGPIO108"),	\
+	PINCTRL_PIN(109, "PLGPIO109"),	\
+	PINCTRL_PIN(110, "PLGPIO110"),	\
+	PINCTRL_PIN(111, "PLGPIO111"),	\
+	PINCTRL_PIN(112, "PLGPIO112"),	\
+	PINCTRL_PIN(113, "PLGPIO113"),	\
+	PINCTRL_PIN(114, "PLGPIO114"),	\
+	PINCTRL_PIN(115, "PLGPIO115"),	\
+	PINCTRL_PIN(116, "PLGPIO116"),	\
+	PINCTRL_PIN(117, "PLGPIO117"),	\
+	PINCTRL_PIN(118, "PLGPIO118"),	\
+	PINCTRL_PIN(119, "PLGPIO119"),	\
+	PINCTRL_PIN(120, "PLGPIO120"),	\
+	PINCTRL_PIN(121, "PLGPIO121"),	\
+	PINCTRL_PIN(122, "PLGPIO122"),	\
+	PINCTRL_PIN(123, "PLGPIO123"),	\
+	PINCTRL_PIN(124, "PLGPIO124"),	\
+	PINCTRL_PIN(125, "PLGPIO125"),	\
+	PINCTRL_PIN(126, "PLGPIO126"),	\
+	PINCTRL_PIN(127, "PLGPIO127"),	\
+	PINCTRL_PIN(128, "PLGPIO128"),	\
+	PINCTRL_PIN(129, "PLGPIO129"),	\
+	PINCTRL_PIN(130, "PLGPIO130"),	\
+	PINCTRL_PIN(131, "PLGPIO131"),	\
+	PINCTRL_PIN(132, "PLGPIO132"),	\
+	PINCTRL_PIN(133, "PLGPIO133"),	\
+	PINCTRL_PIN(134, "PLGPIO134"),	\
+	PINCTRL_PIN(135, "PLGPIO135"),	\
+	PINCTRL_PIN(136, "PLGPIO136"),	\
+	PINCTRL_PIN(137, "PLGPIO137"),	\
+	PINCTRL_PIN(138, "PLGPIO138"),	\
+	PINCTRL_PIN(139, "PLGPIO139"),	\
+	PINCTRL_PIN(140, "PLGPIO140"),	\
+	PINCTRL_PIN(141, "PLGPIO141"),	\
+	PINCTRL_PIN(142, "PLGPIO142"),	\
+	PINCTRL_PIN(143, "PLGPIO143"),	\
+	PINCTRL_PIN(144, "PLGPIO144"),	\
+	PINCTRL_PIN(145, "PLGPIO145"),	\
+	PINCTRL_PIN(146, "PLGPIO146"),	\
+	PINCTRL_PIN(147, "PLGPIO147"),	\
+	PINCTRL_PIN(148, "PLGPIO148"),	\
+	PINCTRL_PIN(149, "PLGPIO149"),	\
+	PINCTRL_PIN(150, "PLGPIO150"),	\
+	PINCTRL_PIN(151, "PLGPIO151"),	\
+	PINCTRL_PIN(152, "PLGPIO152"),	\
+	PINCTRL_PIN(153, "PLGPIO153"),	\
+	PINCTRL_PIN(154, "PLGPIO154"),	\
+	PINCTRL_PIN(155, "PLGPIO155"),	\
+	PINCTRL_PIN(156, "PLGPIO156"),	\
+	PINCTRL_PIN(157, "PLGPIO157"),	\
+	PINCTRL_PIN(158, "PLGPIO158"),	\
+	PINCTRL_PIN(159, "PLGPIO159"),	\
+	PINCTRL_PIN(160, "PLGPIO160"),	\
+	PINCTRL_PIN(161, "PLGPIO161"),	\
+	PINCTRL_PIN(162, "PLGPIO162"),	\
+	PINCTRL_PIN(163, "PLGPIO163"),	\
+	PINCTRL_PIN(164, "PLGPIO164"),	\
+	PINCTRL_PIN(165, "PLGPIO165"),	\
+	PINCTRL_PIN(166, "PLGPIO166"),	\
+	PINCTRL_PIN(167, "PLGPIO167"),	\
+	PINCTRL_PIN(168, "PLGPIO168"),	\
+	PINCTRL_PIN(169, "PLGPIO169"),	\
+	PINCTRL_PIN(170, "PLGPIO170"),	\
+	PINCTRL_PIN(171, "PLGPIO171"),	\
+	PINCTRL_PIN(172, "PLGPIO172"),	\
+	PINCTRL_PIN(173, "PLGPIO173"),	\
+	PINCTRL_PIN(174, "PLGPIO174"),	\
+	PINCTRL_PIN(175, "PLGPIO175"),	\
+	PINCTRL_PIN(176, "PLGPIO176"),	\
+	PINCTRL_PIN(177, "PLGPIO177"),	\
+	PINCTRL_PIN(178, "PLGPIO178"),	\
+	PINCTRL_PIN(179, "PLGPIO179"),	\
+	PINCTRL_PIN(180, "PLGPIO180"),	\
+	PINCTRL_PIN(181, "PLGPIO181"),	\
+	PINCTRL_PIN(182, "PLGPIO182"),	\
+	PINCTRL_PIN(183, "PLGPIO183"),	\
+	PINCTRL_PIN(184, "PLGPIO184"),	\
+	PINCTRL_PIN(185, "PLGPIO185"),	\
+	PINCTRL_PIN(186, "PLGPIO186"),	\
+	PINCTRL_PIN(187, "PLGPIO187"),	\
+	PINCTRL_PIN(188, "PLGPIO188"),	\
+	PINCTRL_PIN(189, "PLGPIO189"),	\
+	PINCTRL_PIN(190, "PLGPIO190"),	\
+	PINCTRL_PIN(191, "PLGPIO191"),	\
+	PINCTRL_PIN(192, "PLGPIO192"),	\
+	PINCTRL_PIN(193, "PLGPIO193"),	\
+	PINCTRL_PIN(194, "PLGPIO194"),	\
+	PINCTRL_PIN(195, "PLGPIO195"),	\
+	PINCTRL_PIN(196, "PLGPIO196"),	\
+	PINCTRL_PIN(197, "PLGPIO197"),	\
+	PINCTRL_PIN(198, "PLGPIO198"),	\
+	PINCTRL_PIN(199, "PLGPIO199"),	\
+	PINCTRL_PIN(200, "PLGPIO200"),	\
+	PINCTRL_PIN(201, "PLGPIO201"),	\
+	PINCTRL_PIN(202, "PLGPIO202"),	\
+	PINCTRL_PIN(203, "PLGPIO203"),	\
+	PINCTRL_PIN(204, "PLGPIO204"),	\
+	PINCTRL_PIN(205, "PLGPIO205"),	\
+	PINCTRL_PIN(206, "PLGPIO206"),	\
+	PINCTRL_PIN(207, "PLGPIO207"),	\
+	PINCTRL_PIN(208, "PLGPIO208"),	\
+	PINCTRL_PIN(209, "PLGPIO209"),	\
+	PINCTRL_PIN(210, "PLGPIO210"),	\
+	PINCTRL_PIN(211, "PLGPIO211"),	\
+	PINCTRL_PIN(212, "PLGPIO212"),	\
+	PINCTRL_PIN(213, "PLGPIO213"),	\
+	PINCTRL_PIN(214, "PLGPIO214"),	\
+	PINCTRL_PIN(215, "PLGPIO215"),	\
+	PINCTRL_PIN(216, "PLGPIO216"),	\
+	PINCTRL_PIN(217, "PLGPIO217"),	\
+	PINCTRL_PIN(218, "PLGPIO218"),	\
+	PINCTRL_PIN(219, "PLGPIO219"),	\
+	PINCTRL_PIN(220, "PLGPIO220"),	\
+	PINCTRL_PIN(221, "PLGPIO221"),	\
+	PINCTRL_PIN(222, "PLGPIO222"),	\
+	PINCTRL_PIN(223, "PLGPIO223"),	\
+	PINCTRL_PIN(224, "PLGPIO224"),	\
+	PINCTRL_PIN(225, "PLGPIO225"),	\
+	PINCTRL_PIN(226, "PLGPIO226"),	\
+	PINCTRL_PIN(227, "PLGPIO227"),	\
+	PINCTRL_PIN(228, "PLGPIO228"),	\
+	PINCTRL_PIN(229, "PLGPIO229"),	\
+	PINCTRL_PIN(230, "PLGPIO230"),	\
+	PINCTRL_PIN(231, "PLGPIO231"),	\
+	PINCTRL_PIN(232, "PLGPIO232"),	\
+	PINCTRL_PIN(233, "PLGPIO233"),	\
+	PINCTRL_PIN(234, "PLGPIO234"),	\
+	PINCTRL_PIN(235, "PLGPIO235"),	\
+	PINCTRL_PIN(236, "PLGPIO236"),	\
+	PINCTRL_PIN(237, "PLGPIO237"),	\
+	PINCTRL_PIN(238, "PLGPIO238"),	\
+	PINCTRL_PIN(239, "PLGPIO239"),	\
+	PINCTRL_PIN(240, "PLGPIO240"),	\
+	PINCTRL_PIN(241, "PLGPIO241"),	\
+	PINCTRL_PIN(242, "PLGPIO242"),	\
+	PINCTRL_PIN(243, "PLGPIO243"),	\
+	PINCTRL_PIN(244, "PLGPIO244"),	\
+	PINCTRL_PIN(245, "PLGPIO245")
+
 #endif /* __PINMUX_SPEAR_H__ */

drivers/pinctrl/spear/pinctrl-spear1310.c

+/*
+ * Driver for the ST Microelectronics SPEAr1310 pinmux
+ *
+ * Copyright (C) 2012 ST Microelectronics
+ * Viresh Kumar <viresh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include "pinctrl-spear.h"
+
+#define DRIVER_NAME "spear1310-pinmux"
+
+/* pins */
+static const struct pinctrl_pin_desc spear1310_pins[] = {
+	SPEAR_PIN_0_TO_101,
+	SPEAR_PIN_102_TO_245,
+};
+
+/* registers */
+#define PERIP_CFG					0x32C
+	#define MCIF_SEL_SHIFT				3
+	#define MCIF_SEL_SD				(0x1 << MCIF_SEL_SHIFT)
+	#define MCIF_SEL_CF				(0x2 << MCIF_SEL_SHIFT)
+	#define MCIF_SEL_XD				(0x3 << MCIF_SEL_SHIFT)
+	#define MCIF_SEL_MASK				(0x3 << MCIF_SEL_SHIFT)
+
+#define PCIE_SATA_CFG					0x3A4
+	#define PCIE_SATA2_SEL_PCIE			(0 << 31)
+	#define PCIE_SATA1_SEL_PCIE			(0 << 30)
+	#define PCIE_SATA0_SEL_PCIE			(0 << 29)
+	#define PCIE_SATA2_SEL_SATA			(1 << 31)
+	#define PCIE_SATA1_SEL_SATA			(1 << 30)
+	#define PCIE_SATA0_SEL_SATA			(1 << 29)
+	#define SATA2_CFG_TX_CLK_EN			(1 << 27)
+	#define SATA2_CFG_RX_CLK_EN			(1 << 26)
+	#define SATA2_CFG_POWERUP_RESET			(1 << 25)
+	#define SATA2_CFG_PM_CLK_EN			(1 << 24)
+	#define SATA1_CFG_TX_CLK_EN			(1 << 23)
+	#define SATA1_CFG_RX_CLK_EN			(1 << 22)
+	#define SATA1_CFG_POWERUP_RESET			(1 << 21)
+	#define SATA1_CFG_PM_CLK_EN			(1 << 20)
+	#define SATA0_CFG_TX_CLK_EN			(1 << 19)
+	#define SATA0_CFG_RX_CLK_EN			(1 << 18)
+	#define SATA0_CFG_POWERUP_RESET			(1 << 17)
+	#define SATA0_CFG_PM_CLK_EN			(1 << 16)
+	#define PCIE2_CFG_DEVICE_PRESENT		(1 << 11)
+	#define PCIE2_CFG_POWERUP_RESET			(1 << 10)
+	#define PCIE2_CFG_CORE_CLK_EN			(1 << 9)
+	#define PCIE2_CFG_AUX_CLK_EN			(1 << 8)
+	#define PCIE1_CFG_DEVICE_PRESENT		(1 << 7)
+	#define PCIE1_CFG_POWERUP_RESET			(1 << 6)
+	#define PCIE1_CFG_CORE_CLK_EN			(1 << 5)
+	#define PCIE1_CFG_AUX_CLK_EN			(1 << 4)
+	#define PCIE0_CFG_DEVICE_PRESENT		(1 << 3)
+	#define PCIE0_CFG_POWERUP_RESET			(1 << 2)
+	#define PCIE0_CFG_CORE_CLK_EN			(1 << 1)
+	#define PCIE0_CFG_AUX_CLK_EN			(1 << 0)
+
+#define PAD_FUNCTION_EN_0				0x650
+	#define PMX_UART0_MASK				(1 << 1)
+	#define PMX_I2C0_MASK				(1 << 2)
+	#define PMX_I2S0_MASK				(1 << 3)
+	#define PMX_SSP0_MASK				(1 << 4)
+	#define PMX_CLCD1_MASK				(1 << 5)
+	#define PMX_EGPIO00_MASK			(1 << 6)
+	#define PMX_EGPIO01_MASK			(1 << 7)
+	#define PMX_EGPIO02_MASK			(1 << 8)
+	#define PMX_EGPIO03_MASK			(1 << 9)
+	#define PMX_EGPIO04_MASK			(1 << 10)
+	#define PMX_EGPIO05_MASK			(1 << 11)
+	#define PMX_EGPIO06_MASK			(1 << 12)
+	#define PMX_EGPIO07_MASK			(1 << 13)
+	#define PMX_EGPIO08_MASK			(1 << 14)
+	#define PMX_EGPIO09_MASK			(1 << 15)
+	#define PMX_SMI_MASK				(1 << 16)
+	#define PMX_NAND8_MASK				(1 << 17)
+	#define PMX_GMIICLK_MASK			(1 << 18)
+	#define PMX_GMIICOL_CRS_XFERER_MIITXCLK_MASK	(1 << 19)
+	#define PMX_RXCLK_RDV_TXEN_D03_MASK		(1 << 20)
+	#define PMX_GMIID47_MASK			(1 << 21)
+	#define PMX_MDC_MDIO_MASK			(1 << 22)
+	#define PMX_MCI_DATA8_15_MASK			(1 << 23)
+	#define PMX_NFAD23_MASK				(1 << 24)
+	#define PMX_NFAD24_MASK				(1 << 25)
+	#define PMX_NFAD25_MASK				(1 << 26)
+	#define PMX_NFCE3_MASK				(1 << 27)
+	#define PMX_NFWPRT3_MASK			(1 << 28)
+	#define PMX_NFRSTPWDWN0_MASK			(1 << 29)
+	#define PMX_NFRSTPWDWN1_MASK			(1 << 30)
+	#define PMX_NFRSTPWDWN2_MASK			(1 << 31)
+
+#define PAD_FUNCTION_EN_1				0x654
+	#define PMX_NFRSTPWDWN3_MASK			(1 << 0)
+	#define PMX_SMINCS2_MASK			(1 << 1)
+	#define PMX_SMINCS3_MASK			(1 << 2)
+	#define PMX_CLCD2_MASK				(1 << 3)
+	#define PMX_KBD_ROWCOL68_MASK			(1 << 4)
+	#define PMX_EGPIO10_MASK			(1 << 5)
+	#define PMX_EGPIO11_MASK			(1 << 6)
+	#define PMX_EGPIO12_MASK			(1 << 7)
+	#define PMX_EGPIO13_MASK			(1 << 8)
+	#define PMX_EGPIO14_MASK			(1 << 9)
+	#define PMX_EGPIO15_MASK			(1 << 10)
+	#define PMX_UART0_MODEM_MASK			(1 << 11)
+	#define PMX_GPT0_TMR0_MASK			(1 << 12)
+	#define PMX_GPT0_TMR1_MASK			(1 << 13)
+	#define PMX_GPT1_TMR0_MASK			(1 << 14)
+	#define PMX_GPT1_TMR1_MASK			(1 << 15)
+	#define PMX_I2S1_MASK				(1 << 16)
+	#define PMX_KBD_ROWCOL25_MASK			(1 << 17)
+	#define PMX_NFIO8_15_MASK			(1 << 18)
+	#define PMX_KBD_COL1_MASK			(1 << 19)
+	#define PMX_NFCE1_MASK				(1 << 20)
+	#define PMX_KBD_COL0_MASK			(1 << 21)
+	#define PMX_NFCE2_MASK				(1 << 22)
+	#define PMX_KBD_ROW1_MASK			(1 << 23)
+	#define PMX_NFWPRT1_MASK			(1 << 24)
+	#define PMX_KBD_ROW0_MASK			(1 << 25)
+	#define PMX_NFWPRT2_MASK			(1 << 26)
+	#define PMX_MCIDATA0_MASK			(1 << 27)
+	#define PMX_MCIDATA1_MASK			(1 << 28)
+	#define PMX_MCIDATA2_MASK			(1 << 29)
+	#define PMX_MCIDATA3_MASK			(1 << 30)
+	#define PMX_MCIDATA4_MASK			(1 << 31)
+
+#define PAD_FUNCTION_EN_2				0x658
+	#define PMX_MCIDATA5_MASK			(1 << 0)
+	#define PMX_MCIDATA6_MASK			(1 << 1)
+	#define PMX_MCIDATA7_MASK			(1 << 2)
+	#define PMX_MCIDATA1SD_MASK			(1 << 3)
+	#define PMX_MCIDATA2SD_MASK			(1 << 4)
+	#define PMX_MCIDATA3SD_MASK			(1 << 5)
+	#define PMX_MCIADDR0ALE_MASK			(1 << 6)
+	#define PMX_MCIADDR1CLECLK_MASK			(1 << 7)
+	#define PMX_MCIADDR2_MASK			(1 << 8)
+	#define PMX_MCICECF_MASK			(1 << 9)
+	#define PMX_MCICEXD_MASK			(1 << 10)
+	#define PMX_MCICESDMMC_MASK			(1 << 11)
+	#define PMX_MCICDCF1_MASK			(1 << 12)
+	#define PMX_MCICDCF2_MASK			(1 << 13)
+	#define PMX_MCICDXD_MASK			(1 << 14)
+	#define PMX_MCICDSDMMC_MASK			(1 << 15)
+	#define PMX_MCIDATADIR_MASK			(1 << 16)
+	#define PMX_MCIDMARQWP_MASK			(1 << 17)
+	#define PMX_MCIIORDRE_MASK			(1 << 18)
+	#define PMX_MCIIOWRWE_MASK			(1 << 19)
+	#define PMX_MCIRESETCF_MASK			(1 << 20)
+	#define PMX_MCICS0CE_MASK			(1 << 21)
+	#define PMX_MCICFINTR_MASK			(1 << 22)
+	#define PMX_MCIIORDY_MASK			(1 << 23)
+	#define PMX_MCICS1_MASK				(1 << 24)
+	#define PMX_MCIDMAACK_MASK			(1 << 25)
+	#define PMX_MCISDCMD_MASK			(1 << 26)
+	#define PMX_MCILEDS_MASK			(1 << 27)
+	#define PMX_TOUCH_XY_MASK			(1 << 28)
+	#define PMX_SSP0_CS0_MASK			(1 << 29)
+	#define PMX_SSP0_CS1_2_MASK			(1 << 30)
+
+/* combined macros */
+#define PMX_GMII_MASK		(PMX_GMIICLK_MASK |			\
+				PMX_GMIICOL_CRS_XFERER_MIITXCLK_MASK |	\
+				PMX_RXCLK_RDV_TXEN_D03_MASK |		\
+				PMX_GMIID47_MASK | PMX_MDC_MDIO_MASK)
+
+#define PMX_EGPIO_0_GRP_MASK	(PMX_EGPIO00_MASK | PMX_EGPIO01_MASK |	\
+				PMX_EGPIO02_MASK |			\
+				PMX_EGPIO03_MASK | PMX_EGPIO04_MASK |	\
+				PMX_EGPIO05_MASK | PMX_EGPIO06_MASK |	\
+				PMX_EGPIO07_MASK | PMX_EGPIO08_MASK |	\
+				PMX_EGPIO09_MASK)
+#define PMX_EGPIO_1_GRP_MASK	(PMX_EGPIO10_MASK | PMX_EGPIO11_MASK |	\
+				PMX_EGPIO12_MASK | PMX_EGPIO13_MASK |	\
+				PMX_EGPIO14_MASK | PMX_EGPIO15_MASK)
+
+#define PMX_KEYBOARD_6X6_MASK	(PMX_KBD_ROW0_MASK | PMX_KBD_ROW1_MASK | \
+				PMX_KBD_ROWCOL25_MASK | PMX_KBD_COL0_MASK | \
+				PMX_KBD_COL1_MASK)
+
+#define PMX_NAND8BIT_0_MASK	(PMX_NAND8_MASK | PMX_NFAD23_MASK |	\
+				PMX_NFAD24_MASK | PMX_NFAD25_MASK |	\
+				PMX_NFWPRT3_MASK | PMX_NFRSTPWDWN0_MASK | \
+				PMX_NFRSTPWDWN1_MASK | PMX_NFRSTPWDWN2_MASK | \
+				PMX_NFCE3_MASK)
+#define PMX_NAND8BIT_1_MASK	PMX_NFRSTPWDWN3_MASK
+
+#define PMX_NAND16BIT_1_MASK	(PMX_KBD_ROWCOL25_MASK | PMX_NFIO8_15_MASK)
+#define PMX_NAND_4CHIPS_MASK	(PMX_NFCE1_MASK | PMX_NFCE2_MASK |	\
+				PMX_NFWPRT1_MASK | PMX_NFWPRT2_MASK |	\
+				PMX_KBD_ROW0_MASK | PMX_KBD_ROW1_MASK |	\
+				PMX_KBD_COL0_MASK | PMX_KBD_COL1_MASK)
+
+#define PMX_MCIFALL_1_MASK	0xF8000000
+#define PMX_MCIFALL_2_MASK	0x0FFFFFFF
+
+#define PMX_PCI_REG1_MASK	(PMX_SMINCS2_MASK | PMX_SMINCS3_MASK |	\
+				PMX_CLCD2_MASK | PMX_KBD_ROWCOL68_MASK | \
+				PMX_EGPIO_1_GRP_MASK | PMX_GPT0_TMR0_MASK | \
+				PMX_GPT0_TMR1_MASK | PMX_GPT1_TMR0_MASK | \
+				PMX_GPT1_TMR1_MASK | PMX_I2S1_MASK |	\
+				PMX_NFCE2_MASK)
+#define PMX_PCI_REG2_MASK	(PMX_TOUCH_XY_MASK | PMX_SSP0_CS0_MASK | \
+				PMX_SSP0_CS1_2_MASK)
+
+#define PMX_SMII_0_1_2_MASK	(PMX_CLCD2_MASK | PMX_KBD_ROWCOL68_MASK)
+#define PMX_RGMII_REG0_MASK	(PMX_MCI_DATA8_15_MASK |		\
+				PMX_GMIICOL_CRS_XFERER_MIITXCLK_MASK |	\
+				PMX_GMIID47_MASK)
+#define PMX_RGMII_REG1_MASK	(PMX_KBD_ROWCOL68_MASK | PMX_EGPIO_1_GRP_MASK |\
+				PMX_KBD_ROW1_MASK | PMX_NFWPRT1_MASK |	\
+				PMX_KBD_ROW0_MASK | PMX_NFWPRT2_MASK)
+#define PMX_RGMII_REG2_MASK	(PMX_TOUCH_XY_MASK | PMX_SSP0_CS0_MASK | \
+				PMX_SSP0_CS1_2_MASK)
+
+#define PCIE_CFG_VAL(x)		(PCIE_SATA##x##_SEL_PCIE |	\
+				PCIE##x##_CFG_AUX_CLK_EN |	\
+				PCIE##x##_CFG_CORE_CLK_EN |	\
+				PCIE##x##_CFG_POWERUP_RESET |	\
+				PCIE##x##_CFG_DEVICE_PRESENT)
+#define SATA_CFG_VAL(x)		(PCIE_SATA##x##_SEL_SATA |	\
+				SATA##x##_CFG_PM_CLK_EN |	\
+				SATA##x##_CFG_POWERUP_RESET |	\
+				SATA##x##_CFG_RX_CLK_EN |	\
+				SATA##x##_CFG_TX_CLK_EN)
+
+/* Pad multiplexing for i2c0 device */
+static const unsigned i2c0_pins[] = { 102, 103 };
+static struct spear_muxreg i2c0_muxreg[] = {
+	{
+		.reg = PAD_FUNCTION_EN_0,
+		.mask = PMX_I2C0_MASK,
+		.val = PMX_I2C0_MASK,
+	},
+};
+
+static struct spear_modemux i2c0_modemux[] = {
+	{
+		.muxregs = i2c0_muxreg,
+		.nmuxregs = ARRAY_SIZE(i2c0_muxreg),
+	},
+};
+
+static struct spear_pingroup i2c0_pingroup = {
+	.name = "i2c0_grp",
+	.pins = i2c0_pins,
+	.npins = ARRAY_SIZE(i2c0_pins),
+	.modemuxs = i2c0_modemux,
+	.nmodemuxs = ARRAY_SIZE(i2c0_modemux),
+};
+
+static const char *const i2c0_grps[] = { "i2c0_grp" };
+static struct spear_function i2c0_function = {
+	.name = "i2c0",
+	.groups = i2c0_grps,
+	.ngroups = ARRAY_SIZE(i2c0_grps),
+};
+
+/* Pad multiplexing for ssp0 device */
+static const unsigned ssp0_pins[] = { 109, 110, 111, 112 };
+static struct spear_muxreg ssp0_muxreg[] = {
+	{
+		.reg = PAD_FUNCTION_EN_0,
+		.mask = PMX_SSP0_MASK,
+		.val = PMX_SSP0_MASK,
+	},
+};
+
+static struct spear_modemux ssp0_modemux[] = {
+	{
+		.muxregs = ssp0_muxreg,
+		.nmuxregs = ARRAY_SIZE(ssp0_muxreg),
+	},
+};
+
+static struct spear_pingroup ssp0_pingroup = {
+	.name = "ssp0_grp",
+	.pins = ssp0_pins,
+	.npins = ARRAY_SIZE(ssp0_pins),
+	.modemuxs = ssp0_modemux,
+	.nmodemuxs = ARRAY_SIZE(ssp0_modemux),
+};
+
+/* Pad multiplexing for ssp0_cs0 device */
+static const unsigned ssp0_cs0_pins[] = { 96 };
+static struct spear_muxreg ssp0_cs0_muxreg[] = {
+	{
+		.reg = PAD_FUNCTION_EN_2,
+		.mask = PMX_SSP0_CS0_MASK,
+		.val = PMX_SSP0_CS0_MASK,
+	},
+};
+
+static struct spear_modemux ssp0_cs0_modemux[] = {
+	{
+		.muxregs = ssp0_cs0_muxreg,
+		.nmuxregs = ARRAY_SIZE(ssp0_cs0_muxreg),
+	},
+};
+
+static struct spear_pingroup ssp0_cs0_pingroup = {
+	.name = "ssp0_cs0_grp",
+	.pins = ssp0_cs0_pins,
+	.npins = ARRAY_SIZE(ssp0_cs0_pins),
+	.modemuxs = ssp0_cs0_modemux,
+	.nmodemuxs = ARRAY_SIZE(ssp0_cs0_modemux),
+};
+
+/* ssp0_cs1_2 device */
+static const unsigned ssp0_cs1_2_pins[] = { 94, 95 };
+static struct spear_muxreg ssp0_cs1_2_muxreg[] = {
+	{
+		.reg = PAD_FUNCTION_EN_2,
+		.mask = PMX_SSP0_CS1_2_MASK,
+		.val = PMX_SSP0_CS1_2_MASK,
+	},
+};
+
+static struct spear_modemux ssp0_cs1_2_modemux[] = {
+	{
+		.muxregs = ssp0_cs1_2_muxreg,
+		.nmuxregs = ARRAY_SIZE(ssp0_cs1_2_muxreg),
+	},
+};
+
+static struct spear_pingroup ssp0_cs1_2_pingroup = {
+	.name = "ssp0_cs1_2_grp",
+	.pins = ssp0_cs1_2_pins,
+	.npins = ARRAY_SIZE(ssp0_cs1_2_pins),
+	.modemuxs = ssp0_cs1_2_modemux,
+	.nmodemuxs = ARRAY_SIZE(ssp0_cs1_2_modemux),
+};
+
+static const char *const ssp0_grps[] = { "ssp0_grp", "ssp0_cs0_grp",
+	"ssp0_cs1_2_grp" };
+static struct spear_function ssp0_function = {
+	.name = "ssp0",
+	.groups = ssp0_grps,
+	.ngroups = ARRAY_SIZE(ssp0_grps),
+};
+
+/* Pad multiplexing for i2s0 device */
+static const unsigned i2s0_pins[] = { 104, 105, 106, 107, 108 };
+static struct spear_muxreg i2s0_muxreg[] = {
+	{
+		.reg = PAD_FUNCTION_EN_0,
+		.mask = PMX_I2S0_MASK,
+		.val = PMX_I2S0_MASK,
+	},
+};
+
+static struct spear_modemux i2s0_modemux[] = {
+	{
+		.muxregs = i2s0_muxreg,
+		.nmuxregs = ARRAY_SIZE(i2s0_muxreg),
+	},
+};
+
+static struct spear_pingroup i2s0_pingroup = {
+	.name = "i2s0_grp",
+	.pins = i2s0_pins,
+	.npins = ARRAY_SIZE(i2s0_pins),
+	.modemuxs = i2s0_modemux,
+	.nmodemuxs = ARRAY_SIZE(i2s0_modemux),
+};
+
+static const char *const i2s0_grps[] = { "i2s0_grp" };
+static struct spear_function i2s0_function = {
+	.name = "i2s0",
+	.groups = i2s0_grps,
+	.ngroups = ARRAY_SIZE(i2s0_grps),
+};
+
+/* Pad multiplexing for i2s1 device */
+static const unsigned i2s1_pins[] = { 0, 1, 2, 3 };
+static struct spear_muxreg i2s1_muxreg[] = {
+	{
+		.reg = PAD_FUNCTION_EN_1,
+		.mask = PMX_I2S1_MASK,
+		.val = PMX_I2S1_MASK,
+	},
+};
+
+static struct spear_modemux i2s1_modemux[] = {
+	{
+		.muxregs = i2s1_muxreg,
+		.nmuxregs = ARRAY_SIZE(i2s1_muxreg),
+	},
+};
+
+static struct spear_pingroup i2s1_pingroup = {
+	.name = "i2s1_grp",
+	.pins = i2s1_pins,
+	.npins = ARRAY_SIZE(i2s1_pins),
+	.modemuxs = i2s1_modemux,
+	.nmodemuxs = ARRAY_SIZE(i2s1_modemux),
+};
+
+static const char *const i2s1_grps[] = { "i2s1_grp" };
+static struct spear_function i2s1_function = {
+	.name = "i2s1",
+	.groups = i2s1_grps,
+	.ngroups = ARRAY_SIZE(i2s1_grps),
+};
+
+/* Pad multiplexing for clcd device */
+static const unsigned clcd_pins[] = { 113, 114, 115, 116, 117, 118, 119, 120,
+	121, 122, 123, 124, 125, 126, 127, 128, 129, 130, 131, 132, 133, 134,
+	135, 136, 137, 138, 139, 140, 141, 142 };
+static struct spear_muxreg clcd_muxreg[] = {
+	{
+		.reg = PAD_FUNCTION_EN_0,
+		.mask = PMX_CLCD1_MASK,
+		.val = PMX_CLCD1_MASK,
+	},
+};
+
+static struct spear_modemux clcd_modemux[] = {
+	{
+		.muxregs = clcd_muxreg,
+		.nmuxregs = ARRAY_SIZE(clcd_muxreg),
+	},
+};
+
+static struct spear_pingroup clcd_pingroup = {
+	.name = "clcd_grp",
+	.pins = clcd_pins,
+	.npins = ARRAY_SIZE(clcd_pins),
+	.modemuxs = clcd_modemux,
+	.nmodemuxs = ARRAY_SIZE(clcd_modemux),
+};
+
+static const unsigned clcd_high_res_pins[] = { 30, 31, 32, 33, 34, 35, 36, 37,
+	38, 39, 40, 41, 42, 43, 44, 45, 46, 47, 48, 49, 50, 51, 52, 53 };
+static struct spear_muxreg clcd_high_res_muxreg[] = {
+	{
+		.reg = PAD_FUNCTION_EN_1,
+		.mask = PMX_CLCD2_MASK,
+		.val = PMX_CLCD2_MASK,
+	},
+};
+
+static struct spear_modemux clcd_high_res_modemux[] = {
+	{
+		.muxregs = clcd_high_res_muxreg,
+		.nmuxregs = ARRAY_SIZE(clcd_high_res_muxreg),
+	},
+};
+
+static struct spear_pingroup clcd_high_res_pingroup = {
+	.name = "clcd_high_res_grp",
+	.pins = clcd_high_res_pins,
+	.npins = ARRAY_SIZE(clcd_high_res_pins),
+	.modemuxs = clcd_high_res_modemux,
+	.nmodemuxs = ARRAY_SIZE(clcd_high_res_modemux),
+};
+
+static const char *const clcd_grps[] = { "clcd_grp", "clcd_high_res" };
+static struct spear_function clcd_function = {
+	.name = "clcd",
+	.groups = clcd_grps,
+	.ngroups = ARRAY_SIZE(clcd_grps),
+};
+
+static const unsigned arm_gpio_pins[] = { 18, 19, 20, 21, 22, 23, 143, 144, 145,
+	146, 147, 148, 149, 150, 151, 152 };
+static struct spear_muxreg arm_gpio_muxreg[] = {
+	{
+		.reg = PAD_FUNCTION_EN_0,
+		.mask = PMX_EGPIO_0_GRP_MASK,
+		.val = PMX_EGPIO_0_GRP_MASK,
+	}, {
+		.reg = PAD_FUNCTION_EN_1,
+		.mask = PMX_EGPIO_1_GRP_MASK,
+		.val = PMX_EGPIO_1_GRP_MASK,
+	},
+};
+
+static struct spear_modemux arm_gpio_modemux[] = {
+	{
+		.muxregs = arm_gpio_muxreg,
+		.nmuxregs = ARRAY_SIZE(arm_gpio_muxreg),
+	},
+};
+
+static struct spear_pingroup arm_gpio_pingroup = {
+	.name = "arm_gpio_grp",
+	.pins = arm_gpio_pins,
+	.npins = ARRAY_SIZE(arm_gpio_pins),
+	.modemuxs = arm_gpio_modemux,
+	.nmodemuxs = ARRAY_SIZE(arm_gpio_modemux),
+};
+
+static const char *const arm_gpio_grps[] = { "arm_gpio_grp" };
+static struct spear_function arm_gpio_function = {
+	.name = "arm_gpio",
+	.groups = arm_gpio_grps,
+	.ngroups = ARRAY_SIZE(arm_gpio_grps),
+};
+
+/* Pad multiplexing for smi 2 chips device */
+static const unsigned smi_2_chips_pins[] = { 153, 154, 155, 156, 157 };
+static struct spear_muxreg smi_2_chips_muxreg[] = {
+	{
+		.reg = PAD_FUNCTION_EN_0,
+		.mask = PMX_SMI_MASK,
+		.val = PMX_SMI_MASK,
+	},
+};
+
+static struct spear_modemux smi_2_chips_modemux[] = {
+	{
+		.muxregs = smi_2_chips_muxreg,
+		.nmuxregs = ARRAY_SIZE(smi_2_chips_muxreg),
+	},
+};
+
+static struct spear_pingroup smi_2_chips_pingroup = {
+	.name = "smi_2_chips_grp",
+	.pins = smi_2_chips_pins,
+	.npins = ARRAY_SIZE(smi_2_chips_pins),
+	.modemuxs = smi_2_chips_modemux,
+	.nmodemuxs = ARRAY_SIZE(smi_2_chips_modemux),
+};
+
+static const unsigned smi_4_chips_pins[] = { 54, 55 };
+static struct spear_muxreg smi_4_chips_muxreg[] = {
+	{
+		.reg = PAD_FUNCTION_EN_0,
+		.mask = PMX_SMI_MASK,
+		.val = PMX_SMI_MASK,
+	}, {
+		.reg = PAD_FUNCTION_EN_1,
+		.mask = PMX_SMINCS2_MASK | PMX_SMINCS3_MASK,
+		.val = PMX_SMINCS2_MASK | PMX_SMINCS3_MASK,
+	},
+};
+
+static struct spear_modemux smi_4_chips_modemux[] = {
+	{
+		.muxregs = smi_4_chips_muxreg,
+		.nmuxregs = ARRAY_SIZE(smi_4_chips_muxreg),
+	},
+};
+
+static struct spear_pingroup smi_4_chips_pingroup = {
+	.name = "smi_4_chips_grp",
+	.pins = smi_4_chips_pins,
+	.npins = ARRAY_SIZE(smi_4_chips_pins),
+	.modemuxs = smi_4_chips_modemux,
+	.nmodemuxs = ARRAY_SIZE(smi_4_chips_modemux),
+};
+
+static const char *const smi_grps[] = { "smi_2_chips_grp", "smi_4_chips_grp" };
+static struct spear_function smi_function = {
+	.name = "smi",
+	.groups = smi_grps,
+	.ngroups = ARRAY_SIZE(smi_grps),
+};
+
+/* Pad multiplexing for gmii device */
+static const unsigned gmii_pins[] = { 173, 174, 175, 176, 177, 178, 179, 180,
+	181, 182, 183, 184, 185, 186, 187, 188, 189, 190, 191, 192, 193, 194,
+	195, 196, 197, 198, 199, 200 };
+static struct spear_muxreg gmii_muxreg[] = {
+	{
+		.reg = PAD_FUNCTION_EN_0,
+		.mask = PMX_GMII_MASK,
+		.val = PMX_GMII_MASK,
+	},
+};
+
+static struct spear_modemux gmii_modemux[] = {
+	{
+		.muxregs = gmii_muxreg,
+		.nmuxregs = ARRAY_SIZE(gmii_muxreg),
+	},
+};
+
+static struct spear_pingroup gmii_pingroup = {
+	.name = "gmii_grp",
+	.pins = gmii_pins,
+	.npins = ARRAY_SIZE(gmii_pins),
+	.modemuxs = gmii_modemux,
+	.nmodemuxs = ARRAY_SIZE(gmii_modemux),
+};
+
+static const char *const gmii_grps[] = { "gmii_grp" };
+static struct spear_function gmii_function = {
+	.name = "gmii",
+	.groups = gmii_grps,
+	.ngroups = ARRAY_SIZE(gmii_grps),
+};
+
+/* Pad multiplexing for rgmii device */
+static const unsigned rgmii_pins[] = { 18, 19, 20, 21, 22, 23, 24, 25, 26, 27,
+	28, 29, 86, 87, 88, 89, 90, 91, 92, 93, 94, 95, 96, 97, 98, 99, 175,
+	180, 181, 182, 183, 185, 188, 193, 194, 195, 196, 197, 198, 211, 212 };
+static struct spear_muxreg rgmii_muxreg[] = {
+	{
+		.reg = PAD_FUNCTION_EN_0,
+		.mask = PMX_RGMII_REG0_MASK,
+		.val = 0,
+	}, {
+		.reg = PAD_FUNCTION_EN_1,
+		.mask = PMX_RGMII_REG1_MASK,
+		.val = 0,
+	}, {
+		.reg = PAD_FUNCTION_EN_2,
+		.mask = PMX_RGMII_REG2_MASK,
+		.val = 0,
+	},
+};
+
+static struct spear_modemux rgmii_modemux[] = {
+	{
+		.muxregs = rgmii_muxreg,
+		.nmuxregs = ARRAY_SIZE(rgmii_muxreg),
+	},
+};
+
+static struct spear_pingroup rgmii_pingroup = {
+	.name = "rgmii_grp",
+	.pins = rgmii_pins,
+	.npins = ARRAY_SIZE(rgmii_pins),
+	.modemuxs = rgmii_modemux,
+	.nmodemuxs = ARRAY_SIZE(rgmii_modemux),
+};
+
+static const char *const rgmii_grps[] = { "rgmii_grp" };
+static struct spear_function rgmii_function = {
+	.name = "rgmii",
+	.groups = rgmii_grps,
+	.ngroups = ARRAY_SIZE(rgmii_grps),
+};
+
+/* Pad multiplexing for smii_0_1_2 device */
+static const unsigned smii_0_1_2_pins[] = { 24, 25, 26, 27, 28, 29, 30, 31, 32,
+	33, 34, 35, 36, 37, 38, 39, 40, 41, 42, 43, 44, 45, 46, 47, 48, 49, 50,
+	51, 52, 53, 54, 55 };
+static struct spear_muxreg smii_0_1_2_muxreg[] = {
+	{
+		.reg = PAD_FUNCTION_EN_1,
+		.mask = PMX_SMII_0_1_2_MASK,
+		.val = 0,
+	},
+};
+
+static struct spear_modemux smii_0_1_2_modemux[] = {
+	{
+		.muxregs = smii_0_1_2_muxreg,
+		.nmuxregs = ARRAY_SIZE(smii_0_1_2_muxreg),
+	},
+};
+
+static struct spear_pingroup smii_0_1_2_pingroup = {
+	.name = "smii_0_1_2_grp",
+	.pins = smii_0_1_2_pins,
+	.npins = ARRAY_SIZE(smii_0_1_2_pins),
+	.modemuxs = smii_0_1_2_modemux,
+	.nmodemuxs = ARRAY_SIZE(smii_0_1_2_modemux),
+};
+
+static const char *const smii_0_1_2_grps[] = { "smii_0_1_2_grp" };
+static struct spear_function smii_0_1_2_function = {
+	.name = "smii_0_1_2",
+	.groups = smii_0_1_2_grps,
+	.ngroups = ARRAY_SIZE(smii_0_1_2_grps),
+};
+
+/* Pad multiplexing for ras_mii_txclk device */
+static const unsigned ras_mii_txclk_pins[] = { 98, 99 };
+static struct spear_muxreg ras_mii_txclk_muxreg[] = {
+	{
+		.reg = PAD_FUNCTION_EN_1,
+		.mask = PMX_NFCE2_MASK,
+		.val = 0,
+	},
+};
+
+static struct spear_modemux ras_mii_txclk_modemux[] = {
+	{
+		.muxregs = ras_mii_txclk_muxreg,
+		.nmuxregs = ARRAY_SIZE(ras_mii_txclk_muxreg),
+	},
+};
+
+static struct spear_pingroup ras_mii_txclk_pingroup = {
+	.name = "ras_mii_txclk_grp",
+	.pins = ras_mii_txclk_pins,
+	.npins = ARRAY_SIZE(ras_mii_txclk_pins),
+	.modemuxs = ras_mii_txclk_modemux,
+	.nmodemuxs = ARRAY_SIZE(ras_mii_txclk_modemux),
+};
+
+static const char *const ras_mii_txclk_grps[] = { "ras_mii_txclk_grp" };
+static struct spear_function ras_mii_txclk_function = {
+	.name = "ras_mii_txclk",
+	.groups = ras_mii_txclk_grps,
+	.ngroups = ARRAY_SIZE(ras_mii_txclk_grps),
+};
+
+/* Pad multiplexing for nand 8bit device (cs0 only) */
+static const unsigned nand_8bit_pins[] = { 56, 57, 58, 59, 60, 61, 62, 63, 64,
+	65, 66, 67, 68, 69, 70, 71, 72, 73, 74, 75, 76, 77, 78, 79, 80, 81, 82,
+	83, 84, 85, 158, 159, 160, 161, 162, 163, 164, 165, 166, 167, 168, 169,
+	170, 171, 172, 201, 202, 203, 204, 205, 206, 207, 208, 209, 210, 211,
+	212 };
+static struct spear_muxreg nand_8bit_muxreg[] = {
+	{
+		.reg = PAD_FUNCTION_EN_0,
+		.mask = PMX_NAND8BIT_0_MASK,
+		.val = PMX_NAND8BIT_0_MASK,
+	}, {
+		.reg = PAD_FUNCTION_EN_1,
+		.mask = PMX_NAND8BIT_1_MASK,
+		.val = PMX_NAND8BIT_1_MASK,
+	},
+};
+
+static struct spear_modemux nand_8bit_modemux[] = {
+	{
+		.muxregs = nand_8bit_muxreg,
+		.nmuxregs = ARRAY_SIZE(nand_8bit_muxreg),
+	},
+};
+
+static struct spear_pingroup nand_8bit_pingroup = {
+	.name = "nand_8bit_grp",
+	.pins = nand_8bit_pins,
+	.npins = ARRAY_SIZE(nand_8bit_pins),
+	.modemuxs = nand_8bit_modemux,
+	.nmodemuxs = ARRAY_SIZE(nand_8bit_modemux),
+};
+
+/* Pad multiplexing for nand 16bit device */
+static const unsigned nand_16bit_pins[] = { 201, 202, 203, 204, 207, 208, 209,
+	210 };
+static struct spear_muxreg nand_16bit_muxreg[] = {
+	{
+		.reg = PAD_FUNCTION_EN_1,
+		.mask = PMX_NAND16BIT_1_MASK,
+		.val = PMX_NAND16BIT_1_MASK,
+	},
+};
+
+static struct spear_modemux nand_16bit_modemux[] = {
+	{
+		.muxregs = nand_16bit_muxreg,
+		.nmuxregs = ARRAY_SIZE(nand_16bit_muxreg),
+	},
+};
+
+static struct spear_pingroup nand_16bit_pingroup = {
+	.name = "nand_16bit_grp",
+	.pins = nand_16bit_pins,
+	.npins = ARRAY_SIZE(nand_16bit_pins),
+	.modemuxs = nand_16bit_modemux,
+	.nmodemuxs = ARRAY_SIZE(nand_16bit_modemux),
+};
+
+/* Pad multiplexing for nand 4 chips */
+static const unsigned nand_4_chips_pins[] = { 205, 206, 211, 212 };
+static struct spear_muxreg nand_4_chips_muxreg[] = {
+	{
+		.reg = PAD_FUNCTION_EN_1,
+		.mask = PMX_NAND_4CHIPS_MASK,
+		.val = PMX_NAND_4CHIPS_MASK,
+	},
+};
+
+static struct spear_modemux nand_4_chips_modemux[] = {
+	{
+		.muxregs = nand_4_chips_muxreg,
+		.nmuxregs = ARRAY_SIZE(nand_4_chips_muxreg),
+	},
+};
+
+static struct spear_pingroup nand_4_chips_pingroup = {
+	.name = "nand_4_chips_grp",
+	.pins = nand_4_chips_pins,
+	.npins = ARRAY_SIZE(nand_4_chips_pins),
+	.modemuxs = nand_4_chips_modemux,
+	.nmodemuxs = ARRAY_SIZE(nand_4_chips_modemux),
+};
+
+static const char *const nand_grps[] = { "nand_8bit_grp", "nand_16bit_grp",
+	"nand_4_chips_grp" };
+static struct spear_function nand_function = {
+	.name = "nand",
+	.groups = nand_grps,
+	.ngroups = ARRAY_SIZE(nand_grps),
+};
+
+/* Pad multiplexing for keyboard_6x6 device */
+static const unsigned keyboard_6x6_pins[] = { 201, 202, 203, 204, 205, 206, 207,
+	208, 209, 210, 211, 212 };
+static struct spear_muxreg keyboard_6x6_muxreg[] = {
+	{
+		.reg = PAD_FUNCTION_EN_1,
+		.mask = PMX_KEYBOARD_6X6_MASK | PMX_NFIO8_15_MASK |
+			PMX_NFCE1_MASK | PMX_NFCE2_MASK | PMX_NFWPRT1_MASK |
+			PMX_NFWPRT2_MASK,
+		.val = PMX_KEYBOARD_6X6_MASK,
+	},
+};
+
+static struct spear_modemux keyboard_6x6_modemux[] = {
+	{
+		.muxregs = keyboard_6x6_muxreg,
+		.nmuxregs = ARRAY_SIZE(keyboard_6x6_muxreg),
+	},
+};
+
+static struct spear_pingroup keyboard_6x6_pingroup = {
+	.name = "keyboard_6x6_grp",
+	.pins = keyboard_6x6_pins,
+	.npins = ARRAY_SIZE(keyboard_6x6_pins),
+	.modemuxs = keyboard_6x6_modemux,
+	.nmodemuxs = ARRAY_SIZE(keyboard_6x6_modemux),
+};
+
+/* Pad multiplexing for keyboard_rowcol6_8 device */
+static const unsigned keyboard_rowcol6_8_pins[] = { 24, 25, 26, 27, 28, 29 };
+static struct spear_muxreg keyboard_rowcol6_8_muxreg[] = {
+	{
+		.reg = PAD_FUNCTION_EN_1,
+		.mask = PMX_KBD_ROWCOL68_MASK,
+		.val = PMX_KBD_ROWCOL68_MASK,
+	},
+};
+
+static struct spear_modemux keyboard_rowcol6_8_modemux[] = {
+	{
+		.muxregs = keyboard_rowcol6_8_muxreg,
+		.nmuxregs = ARRAY_SIZE(keyboard_rowcol6_8_muxreg),
+	},
+};
+
+static struct spear_pingroup keyboard_rowcol6_8_pingroup = {
+	.name = "keyboard_rowcol6_8_grp",
+	.pins = keyboard_rowcol6_8_pins,
+	.npins = ARRAY_SIZE(keyboard_rowcol6_8_pins),
+	.modemuxs = keyboard_rowcol6_8_modemux,
+	.nmodemuxs = ARRAY_SIZE(keyboard_rowcol6_8_modemux),
+};
+
+static const char *const keyboard_grps[] = { "keyboard_6x6_grp",
+	"keyboard_rowcol6_8_grp" };
+static struct spear_function keyboard_function = {
+	.name = "keyboard",
+	.groups = keyboard_grps,
+	.ngroups = ARRAY_SIZE(keyboard_grps),
+};
+
+/* Pad multiplexing for uart0 device */
+static const unsigned uart0_pins[] = { 100, 101 };
+static struct spear_muxreg uart0_muxreg[] = {
+	{
+		.reg = PAD_FUNCTION_EN_0,
+		.mask = PMX_UART0_MASK,
+		.val = PMX_UART0_MASK,
+	},
+};
+
+static struct spear_modemux uart0_modemux[] = {
+	{
+		.muxregs = uart0_muxreg,
+		.nmuxregs = ARRAY_SIZE(uart0_muxreg),
+	},
+};
+
+static struct spear_pingroup uart0_pingroup = {
+	.name = "uart0_grp",
+	.pins = uart0_pins,
+	.npins = ARRAY_SIZE(uart0_pins),
+	.modemuxs = uart0_modemux,
+	.nmodemuxs = ARRAY_SIZE(uart0_modemux),
+};
+
+/* Pad multiplexing for uart0_modem device */
+static const unsigned uart0_modem_pins[] = { 12, 13, 14, 15, 16, 17 };
+static struct spear_muxreg uart0_modem_muxreg[] = {
+	{
+		.reg = PAD_FUNCTION_EN_1,
+		.mask = PMX_UART0_MODEM_MASK,
+		.val = PMX_UART0_MODEM_MASK,
+	},
+};
+
+static struct spear_modemux uart0_modem_modemux[] = {
+	{
+		.muxregs = uart0_modem_muxreg,
+		.nmuxregs = ARRAY_SIZE(uart0_modem_muxreg),
+	},
+};
+
+static struct spear_pingroup uart0_modem_pingroup = {
+	.name = "uart0_modem_grp",
+	.pins = uart0_modem_pins,
+	.npins = ARRAY_SIZE(uart0_modem_pins),
+	.modemuxs = uart0_modem_modemux,
+	.nmodemuxs = ARRAY_SIZE(uart0_modem_modemux),
+};
+
+static const char *const uart0_grps[] = { "uart0_grp", "uart0_modem_grp" };
+static struct spear_function uart0_function = {
+	.name = "uart0",
+	.groups = uart0_grps,
+	.ngroups = ARRAY_SIZE(uart0_grps),
+};
+
+/* Pad multiplexing for gpt0_tmr0 device */
+static const unsigned gpt0_tmr0_pins[] = { 10, 11 };
+static struct spear_muxreg gpt0_tmr0_muxreg[] = {
+	{
+		.reg = PAD_FUNCTION_EN_1,
+		.mask = PMX_GPT0_TMR0_MASK,
+		.val = PMX_GPT0_TMR0_MASK,
+	},
+};
+
+static struct spear_modemux gpt0_tmr0_modemux[] = {
+	{
+		.muxregs = gpt0_tmr0_muxreg,
+		.nmuxregs = ARRAY_SIZE(gpt0_tmr0_muxreg),
+	},
+};
+
+static struct spear_pingroup gpt0_tmr0_pingroup = {
+	.name = "gpt0_tmr0_grp",
+	.pins = gpt0_tmr0_pins,
+	.npins = ARRAY_SIZE(gpt0_tmr0_pins),
+	.modemuxs = gpt0_tmr0_modemux,
+	.nmodemuxs = ARRAY_SIZE(gpt0_tmr0_modemux),
+};
+
+/* Pad multiplexing for gpt0_tmr1 device */
+static const unsigned gpt0_tmr1_pins[] = { 8, 9 };
+static struct spear_muxreg gpt0_tmr1_muxreg[] = {
+	{
+		.reg = PAD_FUNCTION_EN_1,
+		.mask = PMX_GPT0_TMR1_MASK,
+		.val = PMX_GPT0_TMR1_MASK,
+	},
+};
+
+static struct spear_modemux gpt0_tmr1_modemux[] = {
+	{
+		.muxregs = gpt0_tmr1_muxreg,
+		.nmuxregs = ARRAY_SIZE(gpt0_tmr1_muxreg),
+	},
+};
+
+static struct spear_pingroup gpt0_tmr1_pingroup = {
+	.name = "gpt0_tmr1_grp",
+	.pins = gpt0_tmr1_pins,
+	.npins = ARRAY_SIZE(gpt0_tmr1_pins),
+	.modemuxs = gpt0_tmr1_modemux,
+	.nmodemuxs = ARRAY_SIZE(gpt0_tmr1_modemux),
+};
+
+static const char *const gpt0_grps[] = { "gpt0_tmr0_grp", "gpt0_tmr1_grp" };
+static struct spear_function gpt0_function = {
+	.name = "gpt0",
+	.groups = gpt0_grps,
+	.ngroups = ARRAY_SIZE(gpt0_grps),
+};
+
+/* Pad multiplexing for gpt1_tmr0 device */
+static const unsigned gpt1_tmr0_pins[] = { 6, 7 };
+static struct spear_muxreg gpt1_tmr0_muxreg[] = {
+	{
+		.reg = PAD_FUNCTION_EN_1,
+		.mask = PMX_GPT1_TMR0_MASK,
+		.val = PMX_GPT1_TMR0_MASK,
+	},
+};
+
+static struct spear_modemux gpt1_tmr0_modemux[] = {
+	{
+		.muxregs = gpt1_tmr0_muxreg,
+		.nmuxregs = ARRAY_SIZE(gpt1_tmr0_muxreg),
+	},
+};
+
+static struct spear_pingroup gpt1_tmr0_pingroup = {
+	.name = "gpt1_tmr0_grp",
+	.pins = gpt1_tmr0_pins,
+	.npins = ARRAY_SIZE(gpt1_tmr0_pins),
+	.modemuxs = gpt1_tmr0_modemux,
+	.nmodemuxs = ARRAY_SIZE(gpt1_tmr0_modemux),
+};
+
+/* Pad multiplexing for gpt1_tmr1 device */
+static const unsigned gpt1_tmr1_pins[] = { 4, 5 };
+static struct spear_muxreg gpt1_tmr1_muxreg[] = {
+	{
+		.reg = PAD_FUNCTION_EN_1,
+		.mask = PMX_GPT1_TMR1_MASK,
+		.val = PMX_GPT1_TMR1_MASK,
+	},
+};
+
+static struct spear_modemux gpt1_tmr1_modemux[] = {
+	{
+		.muxregs = gpt1_tmr1_muxreg,
+		.nmuxregs = ARRAY_SIZE(gpt1_tmr1_muxreg),
+	},
+};
+
+static struct spear_pingroup gpt1_tmr1_pingroup = {
+	.name = "gpt1_tmr1_grp",
+	.pins = gpt1_tmr1_pins,
+	.npins = ARRAY_SIZE(gpt1_tmr1_pins),
+	.modemuxs = gpt1_tmr1_modemux,
+	.nmodemuxs = ARRAY_SIZE(gpt1_tmr1_modemux),
+};
+
+static const char *const gpt1_grps[] = { "gpt1_tmr1_grp", "gpt1_tmr0_grp" };
+static struct spear_function gpt1_function = {
+	.name = "gpt1",
+	.groups = gpt1_grps,
+	.ngroups = ARRAY_SIZE(gpt1_grps),
+};
+
+/* Pad multiplexing for mcif device */
+static const unsigned mcif_pins[] = { 86, 87, 88, 89, 90, 91, 92, 93, 213, 214,
+	215, 216, 217, 218, 219, 220, 221, 222, 223, 224, 225, 226, 227, 228,
+	229, 230, 231, 232, 233, 234, 235, 236, 237, 238, 239, 240, 241, 242,
+	243, 244, 245 };
+#define MCIF_MUXREG						\
+	{							\
+		.reg = PAD_FUNCTION_EN_0,			\
+		.mask = PMX_MCI_DATA8_15_MASK,			\
+		.val = PMX_MCI_DATA8_15_MASK,			\
+	}, {							\
+		.reg = PAD_FUNCTION_EN_1,			\
+		.mask = PMX_MCIFALL_1_MASK | PMX_NFWPRT1_MASK |	\
+			PMX_NFWPRT2_MASK,			\
+		.val = PMX_MCIFALL_1_MASK,			\
+	}, {							\
+		.reg = PAD_FUNCTION_EN_2,			\
+		.mask = PMX_MCIFALL_2_MASK,			\
+		.val = PMX_MCIFALL_2_MASK,			\
+	}
+
+/* sdhci device */
+static struct spear_muxreg sdhci_muxreg[] = {
+	MCIF_MUXREG,
+	{
+		.reg = PERIP_CFG,
+		.mask = MCIF_SEL_MASK,
+		.val = MCIF_SEL_SD,
+	},
+};
+
+static struct spear_modemux sdhci_modemux[] = {
+	{
+		.muxregs = sdhci_muxreg,
+		.nmuxregs = ARRAY_SIZE(sdhci_muxreg),
+	},
+};
+
+static struct spear_pingroup sdhci_pingroup = {
+	.name = "sdhci_grp",
+	.pins = mcif_pins,
+	.npins = ARRAY_SIZE(mcif_pins),
+	.modemuxs = sdhci_modemux,
+	.nmodemuxs = ARRAY_SIZE(sdhci_modemux),
+};
+
+static const char *const sdhci_grps[] = { "sdhci_grp" };
+static struct spear_function sdhci_function = {
+	.name = "sdhci",
+	.groups = sdhci_grps,
+	.ngroups = ARRAY_SIZE(sdhci_grps),
+};
+
+/* cf device */
+static struct spear_muxreg cf_muxreg[] = {
+	MCIF_MUXREG,
+	{
+		.reg = PERIP_CFG,
+		.mask = MCIF_SEL_MASK,
+		.val = MCIF_SEL_CF,
+	},
+};
+
+static struct spear_modemux cf_modemux[] = {
+	{
+		.muxregs = cf_muxreg,
+		.nmuxregs = ARRAY_SIZE(cf_muxreg),
+	},
+};
+
+static struct spear_pingroup cf_pingroup = {
+	.name = "cf_grp",
+	.pins = mcif_pins,
+	.npins = ARRAY_SIZE(mcif_pins),
+	.modemuxs = cf_modemux,
+	.nmodemuxs = ARRAY_SIZE(cf_modemux),
+};
+
+static const char *const cf_grps[] = { "cf_grp" };
+static struct spear_function cf_function = {
+	.name = "cf",
+	.groups = cf_grps,
+	.ngroups = ARRAY_SIZE(cf_grps),
+};
+
+/* xd device */
+static struct spear_muxreg xd_muxreg[] = {
+	MCIF_MUXREG,
+	{
+		.reg = PERIP_CFG,
+		.mask = MCIF_SEL_MASK,
+		.val = MCIF_SEL_XD,
+	},
+};
+
+static struct spear_modemux xd_modemux[] = {
+	{
+		.muxregs = xd_muxreg,
+		.nmuxregs = ARRAY_SIZE(xd_muxreg),
+	},
+};
+
+static struct spear_pingroup xd_pingroup = {
+	.name = "xd_grp",
+	.pins = mcif_pins,
+	.npins = ARRAY_SIZE(mcif_pins),
+	.modemuxs = xd_modemux,
+	.nmodemuxs = ARRAY_SIZE(xd_modemux),
+};
+
+static const char *const xd_grps[] = { "xd_grp" };
+static struct spear_function xd_function = {
+	.name = "xd",
+	.groups = xd_grps,
+	.ngroups = ARRAY_SIZE(xd_grps),
+};
+
+/* Pad multiplexing for touch_xy device */
+static const unsigned touch_xy_pins[] = { 97 };
+static struct spear_muxreg touch_xy_muxreg[] = {
+	{
+		.reg = PAD_FUNCTION_EN_2,
+		.mask = PMX_TOUCH_XY_MASK,
+		.val = PMX_TOUCH_XY_MASK,
+	},
+};
+
+static struct spear_modemux touch_xy_modemux[] = {
+	{
+		.muxregs = touch_xy_muxreg,
+		.nmuxregs = ARRAY_SIZE(touch_xy_muxreg),
+	},
+};
+
+static struct spear_pingroup touch_xy_pingroup = {
+	.name = "touch_xy_grp",
+	.pins = touch_xy_pins,
+	.npins = ARRAY_SIZE(touch_xy_pins),
+	.modemuxs = touch_xy_modemux,
+	.nmodemuxs = ARRAY_SIZE(touch_xy_modemux),
+};
+
+static const char *const touch_xy_grps[] = { "touch_xy_grp" };
+static struct spear_function touch_xy_function = {
+	.name = "touchscreen",
+	.groups = touch_xy_grps,
+	.ngroups = ARRAY_SIZE(touch_xy_grps),
+};
+
+/* Pad multiplexing for uart1 device */
+/* Muxed with I2C */
+static const unsigned uart1_dis_i2c_pins[] = { 102, 103 };
+static struct spear_muxreg uart1_dis_i2c_muxreg[] = {
+	{
+		.reg = PAD_FUNCTION_EN_0,
+		.mask = PMX_I2C0_MASK,
+		.val = 0,
+	},
+};
+
+static struct spear_modemux uart1_dis_i2c_modemux[] = {
+	{
+		.muxregs = uart1_dis_i2c_muxreg,
+		.nmuxregs = ARRAY_SIZE(uart1_dis_i2c_muxreg),
+	},
+};
+
+static struct spear_pingroup uart_1_dis_i2c_pingroup = {
+	.name = "uart1_disable_i2c_grp",
+	.pins = uart1_dis_i2c_pins,
+	.npins = ARRAY_SIZE(uart1_dis_i2c_pins),
+	.modemuxs = uart1_dis_i2c_modemux,
+	.nmodemuxs = ARRAY_SIZE(uart1_dis_i2c_modemux),
+};
+
+/* Muxed with SD/MMC */
+static const unsigned uart1_dis_sd_pins[] = { 214, 215 };
+static struct spear_muxreg uart1_dis_sd_muxreg[] = {
+	{
+		.reg = PAD_FUNCTION_EN_1,
+		.mask = PMX_MCIDATA1_MASK |
+			PMX_MCIDATA2_MASK,
+		.val = 0,
+	},
+};
+
+static struct spear_modemux uart1_dis_sd_modemux[] = {
+	{
+		.muxregs = uart1_dis_sd_muxreg,
+		.nmuxregs = ARRAY_SIZE(uart1_dis_sd_muxreg),
+	},
+};
+
+static struct spear_pingroup uart_1_dis_sd_pingroup = {
+	.name = "uart1_disable_sd_grp",
+	.pins = uart1_dis_sd_pins,
+	.npins = ARRAY_SIZE(uart1_dis_sd_pins),
+	.modemuxs = uart1_dis_sd_modemux,
+	.nmodemuxs = ARRAY_SIZE(uart1_dis_sd_modemux),
+};
+
+static const char *const uart1_grps[] = { "uart1_disable_i2c_grp",
+	"uart1_disable_sd_grp" };
+static struct spear_function uart1_function = {
+	.name = "uart1",
+	.groups = uart1_grps,
+	.ngroups = ARRAY_SIZE(uart1_grps),
+};
+
+/* Pad multiplexing for uart2_3 device */
+static const unsigned uart2_3_pins[] = { 104, 105, 106, 107 };
+static struct spear_muxreg uart2_3_muxreg[] = {
+	{
+		.reg = PAD_FUNCTION_EN_0,
+		.mask = PMX_I2S0_MASK,
+		.val = 0,
+	},
+};
+
+static struct spear_modemux uart2_3_modemux[] = {
+	{
+		.muxregs = uart2_3_muxreg,
+		.nmuxregs = ARRAY_SIZE(uart2_3_muxreg),
+	},
+};
+
+static struct spear_pingroup uart_2_3_pingroup = {
+	.name = "uart2_3_grp",
+	.pins = uart2_3_pins,
+	.npins = ARRAY_SIZE(uart2_3_pins),
+	.modemuxs = uart2_3_modemux,
+	.nmodemuxs = ARRAY_SIZE(uart2_3_modemux),
+};
+
+static const char *const uart2_3_grps[] = { "uart2_3_grp" };
+static struct spear_function uart2_3_function = {
+	.name = "uart2_3",
+	.groups = uart2_3_grps,
+	.ngroups = ARRAY_SIZE(uart2_3_grps),
+};
+
+/* Pad multiplexing for uart4 device */
+static const unsigned uart4_pins[] = { 108, 113 };
+static struct spear_muxreg uart4_muxreg[] = {
+	{
+		.reg = PAD_FUNCTION_EN_0,
+		.mask = PMX_I2S0_MASK | PMX_CLCD1_MASK,
+		.val = 0,
+	},
+};
+
+static struct spear_modemux uart4_modemux[] = {
+	{
+		.muxregs = uart4_muxreg,
+		.nmuxregs = ARRAY_SIZE(uart4_muxreg),
+	},
+};
+
+static struct spear_pingroup uart_4_pingroup = {
+	.name = "uart4_grp",
+	.pins = uart4_pins,
+	.npins = ARRAY_SIZE(uart4_pins),
+	.modemuxs = uart4_modemux,
+	.nmodemuxs = ARRAY_SIZE(uart4_modemux),
+};
+
+static const char *const uart4_grps[] = { "uart4_grp" };
+static struct spear_function uart4_function = {
+	.name = "uart4",
+	.groups = uart4_grps,
+	.ngroups = ARRAY_SIZE(uart4_grps),
+};
+
+/* Pad multiplexing for uart5 device */
+static const unsigned uart5_pins[] = { 114, 115 };
+static struct spear_muxreg uart5_muxreg[] = {
+	{
+		.reg = PAD_FUNCTION_EN_0,
+		.mask = PMX_CLCD1_MASK,
+		.val = 0,
+	},
+};
+
+static struct spear_modemux uart5_modemux[] = {
+	{
+		.muxregs = uart5_muxreg,
+		.nmuxregs = ARRAY_SIZE(uart5_muxreg),
+	},
+};
+
+static struct spear_pingroup uart_5_pingroup = {
+	.name = "uart5_grp",
+	.pins = uart5_pins,
+	.npins = ARRAY_SIZE(uart5_pins),
+	.modemuxs = uart5_modemux,
+	.nmodemuxs = ARRAY_SIZE(uart5_modemux),
+};
+
+static const char *const uart5_grps[] = { "uart5_grp" };
+static struct spear_function uart5_function = {
+	.name = "uart5",
+	.groups = uart5_grps,
+	.ngroups = ARRAY_SIZE(uart5_grps),
+};
+
+/* Pad multiplexing for rs485_0_1_tdm_0_1 device */
+static const unsigned rs485_0_1_tdm_0_1_pins[] = { 116, 117, 118, 119, 120, 121,
+	122, 123, 124, 125, 126, 127, 128, 129, 130, 131, 132, 133, 134, 135,
+	136, 137 };
+static struct spear_muxreg rs485_0_1_tdm_0_1_muxreg[] = {
+	{
+		.reg = PAD_FUNCTION_EN_0,
+		.mask = PMX_CLCD1_MASK,
+		.val = 0,
+	},
+};
+
+static struct spear_modemux rs485_0_1_tdm_0_1_modemux[] = {
+	{
+		.muxregs = rs485_0_1_tdm_0_1_muxreg,
+		.nmuxregs = ARRAY_SIZE(rs485_0_1_tdm_0_1_muxreg),
+	},
+};
+
+static struct spear_pingroup rs485_0_1_tdm_0_1_pingroup = {
+	.name = "rs485_0_1_tdm_0_1_grp",
+	.pins = rs485_0_1_tdm_0_1_pins,
+	.npins = ARRAY_SIZE(rs485_0_1_tdm_0_1_pins),
+	.modemuxs = rs485_0_1_tdm_0_1_modemux,
+	.nmodemuxs = ARRAY_SIZE(rs485_0_1_tdm_0_1_modemux),
+};
+
+static const char *const rs485_0_1_tdm_0_1_grps[] = { "rs485_0_1_tdm_0_1_grp" };
+static struct spear_function rs485_0_1_tdm_0_1_function = {
+	.name = "rs485_0_1_tdm_0_1",
+	.groups = rs485_0_1_tdm_0_1_grps,
+	.ngroups = ARRAY_SIZE(rs485_0_1_tdm_0_1_grps),
+};
+
+/* Pad multiplexing for i2c_1_2 device */
+static const unsigned i2c_1_2_pins[] = { 138, 139, 140, 141 };
+static struct spear_muxreg i2c_1_2_muxreg[] = {
+	{
+		.reg = PAD_FUNCTION_EN_0,
+		.mask = PMX_CLCD1_MASK,
+		.val = 0,
+	},
+};
+
+static struct spear_modemux i2c_1_2_modemux[] = {
+	{
+		.muxregs = i2c_1_2_muxreg,
+		.nmuxregs = ARRAY_SIZE(i2c_1_2_muxreg),
+	},
+};
+
+static struct spear_pingroup i2c_1_2_pingroup = {
+	.name = "i2c_1_2_grp",
+	.pins = i2c_1_2_pins,
+	.npins = ARRAY_SIZE(i2c_1_2_pins),
+	.modemuxs = i2c_1_2_modemux,
+	.nmodemuxs = ARRAY_SIZE(i2c_1_2_modemux),
+};
+
+static const char *const i2c_1_2_grps[] = { "i2c_1_2_grp" };
+static struct spear_function i2c_1_2_function = {
+	.name = "i2c_1_2",
+	.groups = i2c_1_2_grps,
+	.ngroups = ARRAY_SIZE(i2c_1_2_grps),
+};
+
+/* Pad multiplexing for i2c3_dis_smi_clcd device */
+/* Muxed with SMI & CLCD */
+static const unsigned i2c3_dis_smi_clcd_pins[] = { 142, 153 };
+static struct spear_muxreg i2c3_dis_smi_clcd_muxreg[] = {
+	{
+		.reg = PAD_FUNCTION_EN_0,
+		.mask = PMX_CLCD1_MASK | PMX_SMI_MASK,
+		.val = 0,
+	},
+};
+
+static struct spear_modemux i2c3_dis_smi_clcd_modemux[] = {
+	{
+		.muxregs = i2c3_dis_smi_clcd_muxreg,
+		.nmuxregs = ARRAY_SIZE(i2c3_dis_smi_clcd_muxreg),
+	},
+};
+
+static struct spear_pingroup i2c3_dis_smi_clcd_pingroup = {
+	.name = "i2c3_dis_smi_clcd_grp",
+	.pins = i2c3_dis_smi_clcd_pins,
+	.npins = ARRAY_SIZE(i2c3_dis_smi_clcd_pins),
+	.modemuxs = i2c3_dis_smi_clcd_modemux,
+	.nmodemuxs = ARRAY_SIZE(i2c3_dis_smi_clcd_modemux),
+};
+
+/* Pad multiplexing for i2c3_dis_sd_i2s0 device */
+/* Muxed with SD/MMC & I2S1 */
+static const unsigned i2c3_dis_sd_i2s0_pins[] = { 0, 216 };
+static struct spear_muxreg i2c3_dis_sd_i2s0_muxreg[] = {
+	{
+		.reg = PAD_FUNCTION_EN_1,
+		.mask = PMX_I2S1_MASK | PMX_MCIDATA3_MASK,
+		.val = 0,
+	},
+};
+
+static struct spear_modemux i2c3_dis_sd_i2s0_modemux[] = {
+	{
+		.muxregs = i2c3_dis_sd_i2s0_muxreg,
+		.nmuxregs = ARRAY_SIZE(i2c3_dis_sd_i2s0_muxreg),
+	},
+};
+
+static struct spear_pingroup i2c3_dis_sd_i2s0_pingroup = {
+	.name = "i2c3_dis_sd_i2s0_grp",
+	.pins = i2c3_dis_sd_i2s0_pins,
+	.npins = ARRAY_SIZE(i2c3_dis_sd_i2s0_pins),
+	.modemuxs = i2c3_dis_sd_i2s0_modemux,
+	.nmodemuxs = ARRAY_SIZE(i2c3_dis_sd_i2s0_modemux),
+};
+
+static const char *const i2c3_grps[] = { "i2c3_dis_smi_clcd_grp",
+	"i2c3_dis_sd_i2s0_grp" };
+static struct spear_function i2c3_unction = {
+	.name = "i2c3_i2s1",
+	.groups = i2c3_grps,
+	.ngroups = ARRAY_SIZE(i2c3_grps),
+};
+
+/* Pad multiplexing for i2c_4_5_dis_smi device */
+/* Muxed with SMI */
+static const unsigned i2c_4_5_dis_smi_pins[] = { 154, 155, 156, 157 };
+static struct spear_muxreg i2c_4_5_dis_smi_muxreg[] = {
+	{
+		.reg = PAD_FUNCTION_EN_0,
+		.mask = PMX_SMI_MASK,
+		.val = 0,
+	},
+};
+
+static struct spear_modemux i2c_4_5_dis_smi_modemux[] = {
+	{
+		.muxregs = i2c_4_5_dis_smi_muxreg,
+		.nmuxregs = ARRAY_SIZE(i2c_4_5_dis_smi_muxreg),
+	},
+};
+
+static struct spear_pingroup i2c_4_5_dis_smi_pingroup = {
+	.name = "i2c_4_5_dis_smi_grp",
+	.pins = i2c_4_5_dis_smi_pins,
+	.npins = ARRAY_SIZE(i2c_4_5_dis_smi_pins),
+	.modemuxs = i2c_4_5_dis_smi_modemux,
+	.nmodemuxs = ARRAY_SIZE(i2c_4_5_dis_smi_modemux),
+};
+
+/* Pad multiplexing for i2c4_dis_sd device */
+/* Muxed with SD/MMC */
+static const unsigned i2c4_dis_sd_pins[] = { 217, 218 };
+static struct spear_muxreg i2c4_dis_sd_muxreg[] = {
+	{
+		.reg = PAD_FUNCTION_EN_1,
+		.mask = PMX_MCIDATA4_MASK,
+		.val = 0,
+	}, {
+		.reg = PAD_FUNCTION_EN_2,
+		.mask = PMX_MCIDATA5_MASK,
+		.val = 0,
+	},
+};
+
+static struct spear_modemux i2c4_dis_sd_modemux[] = {
+	{
+		.muxregs = i2c4_dis_sd_muxreg,
+		.nmuxregs = ARRAY_SIZE(i2c4_dis_sd_muxreg),
+	},
+};
+
+static struct spear_pingroup i2c4_dis_sd_pingroup = {
+	.name = "i2c4_dis_sd_grp",
+	.pins = i2c4_dis_sd_pins,
+	.npins = ARRAY_SIZE(i2c4_dis_sd_pins),
+	.modemuxs = i2c4_dis_sd_modemux,
+	.nmodemuxs = ARRAY_SIZE(i2c4_dis_sd_modemux),
+};
+
+/* Pad multiplexing for i2c5_dis_sd device */
+/* Muxed with SD/MMC */
+static const unsigned i2c5_dis_sd_pins[] = { 219, 220 };
+static struct spear_muxreg i2c5_dis_sd_muxreg[] = {
+	{
+		.reg = PAD_FUNCTION_EN_2,
+		.mask = PMX_MCIDATA6_MASK |
+			PMX_MCIDATA7_MASK,
+		.val = 0,
+	},
+};
+
+static struct spear_modemux i2c5_dis_sd_modemux[] = {
+	{
+		.muxregs = i2c5_dis_sd_muxreg,
+		.nmuxregs = ARRAY_SIZE(i2c5_dis_sd_muxreg),
+	},
+};
+
+static struct spear_pingroup i2c5_dis_sd_pingroup = {
+	.name = "i2c5_dis_sd_grp",
+	.pins = i2c5_dis_sd_pins,
+	.npins = ARRAY_SIZE(i2c5_dis_sd_pins),
+	.modemuxs = i2c5_dis_sd_modemux,
+	.nmodemuxs = ARRAY_SIZE(i2c5_dis_sd_modemux),
+};
+
+static const char *const i2c_4_5_grps[] = { "i2c5_dis_sd_grp",
+	"i2c4_dis_sd_grp", "i2c_4_5_dis_smi_grp" };
+static struct spear_function i2c_4_5_function = {
+	.name = "i2c_4_5",
+	.groups = i2c_4_5_grps,
+	.ngroups = ARRAY_SIZE(i2c_4_5_grps),
+};
+
+/* Pad multiplexing for i2c_6_7_dis_kbd device */
+/* Muxed with KBD */
+static const unsigned i2c_6_7_dis_kbd_pins[] = { 207, 208, 209, 210 };
+static struct spear_muxreg i2c_6_7_dis_kbd_muxreg[] = {
+	{
+		.reg = PAD_FUNCTION_EN_1,
+		.mask = PMX_KBD_ROWCOL25_MASK,
+		.val = 0,
+	},
+};
+
+static struct spear_modemux i2c_6_7_dis_kbd_modemux[] = {
+	{
+		.muxregs = i2c_6_7_dis_kbd_muxreg,
+		.nmuxregs = ARRAY_SIZE(i2c_6_7_dis_kbd_muxreg),
+	},
+};
+
+static struct spear_pingroup i2c_6_7_dis_kbd_pingroup = {
+	.name = "i2c_6_7_dis_kbd_grp",
+	.pins = i2c_6_7_dis_kbd_pins,
+	.npins = ARRAY_SIZE(i2c_6_7_dis_kbd_pins),
+	.modemuxs = i2c_6_7_dis_kbd_modemux,
+	.nmodemuxs = ARRAY_SIZE(i2c_6_7_dis_kbd_modemux),
+};
+
+/* Pad multiplexing for i2c6_dis_sd device */
+/* Muxed with SD/MMC */
+static const unsigned i2c6_dis_sd_pins[] = { 236, 237 };
+static struct spear_muxreg i2c6_dis_sd_muxreg[] = {
+	{
+		.reg = PAD_FUNCTION_EN_2,
+		.mask = PMX_MCIIORDRE_MASK |
+			PMX_MCIIOWRWE_MASK,
+		.val = 0,
+	},
+};
+
+static struct spear_modemux i2c6_dis_sd_modemux[] = {
+	{
+		.muxregs = i2c6_dis_sd_muxreg,
+		.nmuxregs = ARRAY_SIZE(i2c6_dis_sd_muxreg),
+	},
+};
+
+static struct spear_pingroup i2c6_dis_sd_pingroup = {
+	.name = "i2c6_dis_sd_grp",
+	.pins = i2c6_dis_sd_pins,
+	.npins = ARRAY_SIZE(i2c6_dis_sd_pins),
+	.modemuxs = i2c6_dis_sd_modemux,
+	.nmodemuxs = ARRAY_SIZE(i2c6_dis_sd_modemux),
+};
+
+/* Pad multiplexing for i2c7_dis_sd device */
+static const unsigned i2c7_dis_sd_pins[] = { 238, 239 };
+static struct spear_muxreg i2c7_dis_sd_muxreg[] = {
+	{
+		.reg = PAD_FUNCTION_EN_2,
+		.mask = PMX_MCIRESETCF_MASK |
+			PMX_MCICS0CE_MASK,
+		.val = 0,
+	},
+};
+
+static struct spear_modemux i2c7_dis_sd_modemux[] = {
+	{
+		.muxregs = i2c7_dis_sd_muxreg,
+		.nmuxregs = ARRAY_SIZE(i2c7_dis_sd_muxreg),
+	},
+};
+
+static struct spear_pingroup i2c7_dis_sd_pingroup = {
+	.name = "i2c7_dis_sd_grp",
+	.pins = i2c7_dis_sd_pins,
+	.npins = ARRAY_SIZE(i2c7_dis_sd_pins),
+	.modemuxs = i2c7_dis_sd_modemux,
+	.nmodemuxs = ARRAY_SIZE(i2c7_dis_sd_modemux),
+};
+
+static const char *const i2c_6_7_grps[] = { "i2c6_dis_sd_grp",
+	"i2c7_dis_sd_grp", "i2c_6_7_dis_kbd_grp" };
+static struct spear_function i2c_6_7_function = {
+	.name = "i2c_6_7",
+	.groups = i2c_6_7_grps,
+	.ngroups = ARRAY_SIZE(i2c_6_7_grps),
+};
+
+/* Pad multiplexing for can0_dis_nor device */
+/* Muxed with NOR */
+static const unsigned can0_dis_nor_pins[] = { 56, 57 };
+static struct spear_muxreg can0_dis_nor_muxreg[] = {
+	{
+		.reg = PAD_FUNCTION_EN_0,
+		.mask = PMX_NFRSTPWDWN2_MASK,
+		.val = 0,
+	}, {
+		.reg = PAD_FUNCTION_EN_1,
+		.mask = PMX_NFRSTPWDWN3_MASK,
+		.val = 0,
+	},
+};
+
+static struct spear_modemux can0_dis_nor_modemux[] = {
+	{
+		.muxregs = can0_dis_nor_muxreg,
+		.nmuxregs = ARRAY_SIZE(can0_dis_nor_muxreg),
+	},
+};
+
+static struct spear_pingroup can0_dis_nor_pingroup = {
+	.name = "can0_dis_nor_grp",
+	.pins = can0_dis_nor_pins,
+	.npins = ARRAY_SIZE(can0_dis_nor_pins),
+	.modemuxs = can0_dis_nor_modemux,
+	.nmodemuxs = ARRAY_SIZE(can0_dis_nor_modemux),
+};
+
+/* Pad multiplexing for can0_dis_sd device */
+/* Muxed with SD/MMC */
+static const unsigned can0_dis_sd_pins[] = { 240, 241 };
+static struct spear_muxreg can0_dis_sd_muxreg[] = {
+	{
+		.reg = PAD_FUNCTION_EN_2,
+		.mask = PMX_MCICFINTR_MASK | PMX_MCIIORDY_MASK,
+		.val = 0,
+	},
+};
+
+static struct spear_modemux can0_dis_sd_modemux[] = {
+	{
+		.muxregs = can0_dis_sd_muxreg,
+		.nmuxregs = ARRAY_SIZE(can0_dis_sd_muxreg),
+	},
+};
+
+static struct spear_pingroup can0_dis_sd_pingroup = {
+	.name = "can0_dis_sd_grp",
+	.pins = can0_dis_sd_pins,
+	.npins = ARRAY_SIZE(can0_dis_sd_pins),
+	.modemuxs = can0_dis_sd_modemux,
+	.nmodemuxs = ARRAY_SIZE(can0_dis_sd_modemux),
+};
+
+static const char *const can0_grps[] = { "can0_dis_nor_grp", "can0_dis_sd_grp"
+};
+static struct spear_function can0_function = {
+	.name = "can0",
+	.groups = can0_grps,
+	.ngroups = ARRAY_SIZE(can0_grps),
+};
+
+/* Pad multiplexing for can1_dis_sd device */
+/* Muxed with SD/MMC */
+static const unsigned can1_dis_sd_pins[] = { 242, 243 };
+static struct spear_muxreg can1_dis_sd_muxreg[] = {
+	{
+		.reg = PAD_FUNCTION_EN_2,
+		.mask = PMX_MCICS1_MASK | PMX_MCIDMAACK_MASK,
+		.val = 0,
+	},
+};
+
+static struct spear_modemux can1_dis_sd_modemux[] = {
+	{
+		.muxregs = can1_dis_sd_muxreg,
+		.nmuxregs = ARRAY_SIZE(can1_dis_sd_muxreg),
+	},
+};
+
+static struct spear_pingroup can1_dis_sd_pingroup = {
+	.name = "can1_dis_sd_grp",
+	.pins = can1_dis_sd_pins,
+	.npins = ARRAY_SIZE(can1_dis_sd_pins),
+	.modemuxs = can1_dis_sd_modemux,
+	.nmodemuxs = ARRAY_SIZE(can1_dis_sd_modemux),
+};
+
+/* Pad multiplexing for can1_dis_kbd device */
+/* Muxed with KBD */
+static const unsigned can1_dis_kbd_pins[] = { 201, 202 };
+static struct spear_muxreg can1_dis_kbd_muxreg[] = {
+	{
+		.reg = PAD_FUNCTION_EN_1,
+		.mask = PMX_KBD_ROWCOL25_MASK,
+		.val = 0,
+	},
+};
+
+static struct spear_modemux can1_dis_kbd_modemux[] = {
+	{
+		.muxregs = can1_dis_kbd_muxreg,
+		.nmuxregs = ARRAY_SIZE(can1_dis_kbd_muxreg),
+	},
+};
+
+static struct spear_pingroup can1_dis_kbd_pingroup = {
+	.name = "can1_dis_kbd_grp",
+	.pins = can1_dis_kbd_pins,
+	.npins = ARRAY_SIZE(can1_dis_kbd_pins),
+	.modemuxs = can1_dis_kbd_modemux,
+	.nmodemuxs = ARRAY_SIZE(can1_dis_kbd_modemux),
+};
+
+static const char *const can1_grps[] = { "can1_dis_sd_grp", "can1_dis_kbd_grp"
+};
+static struct spear_function can1_function = {
+	.name = "can1",
+	.groups = can1_grps,
+	.ngroups = ARRAY_SIZE(can1_grps),
+};
+
+/* Pad multiplexing for pci device */
+static const unsigned pci_sata_pins[] = { 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 18,
+	19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31, 32, 33, 34, 35, 36,
+	37, 38, 39, 40, 41, 42, 43, 44, 45, 46, 47, 48, 49, 50, 51, 52, 53, 54,
+	55, 86, 87, 88, 89, 90, 91, 92, 93, 94, 95, 96, 97, 98, 99 };
+#define PCI_SATA_MUXREG				\
+	{					\
+		.reg = PAD_FUNCTION_EN_0,	\
+		.mask = PMX_MCI_DATA8_15_MASK,	\
+		.val = 0,			\
+	}, {					\
+		.reg = PAD_FUNCTION_EN_1,	\
+		.mask = PMX_PCI_REG1_MASK,	\
+		.val = 0,			\
+	}, {					\
+		.reg = PAD_FUNCTION_EN_2,	\
+		.mask = PMX_PCI_REG2_MASK,	\
+		.val = 0,			\
+	}
+
+/* pad multiplexing for pcie0 device */
+static struct spear_muxreg pcie0_muxreg[] = {
+	PCI_SATA_MUXREG,
+	{
+		.reg = PCIE_SATA_CFG,
+		.mask = PCIE_CFG_VAL(0),
+		.val = PCIE_CFG_VAL(0),
+	},
+};
+
+static struct spear_modemux pcie0_modemux[] = {
+	{
+		.muxregs = pcie0_muxreg,
+		.nmuxregs = ARRAY_SIZE(pcie0_muxreg),
+	},
+};
+
+static struct spear_pingroup pcie0_pingroup = {
+	.name = "pcie0_grp",
+	.pins = pci_sata_pins,
+	.npins = ARRAY_SIZE(pci_sata_pins),
+	.modemuxs = pcie0_modemux,
+	.nmodemuxs = ARRAY_SIZE(pcie0_modemux),
+};
+
+/* pad multiplexing for pcie1 device */
+static struct spear_muxreg pcie1_muxreg[] = {
+	PCI_SATA_MUXREG,
+	{
+		.reg = PCIE_SATA_CFG,
+		.mask = PCIE_CFG_VAL(1),
+		.val = PCIE_CFG_VAL(1),
+	},
+};
+
+static struct spear_modemux pcie1_modemux[] = {
+	{
+		.muxregs = pcie1_muxreg,
+		.nmuxregs = ARRAY_SIZE(pcie1_muxreg),
+	},
+};
+
+static struct spear_pingroup pcie1_pingroup = {
+	.name = "pcie1_grp",
+	.pins = pci_sata_pins,
+	.npins = ARRAY_SIZE(pci_sata_pins),
+	.modemuxs = pcie1_modemux,
+	.nmodemuxs = ARRAY_SIZE(pcie1_modemux),
+};
+
+/* pad multiplexing for pcie2 device */
+static struct spear_muxreg pcie2_muxreg[] = {
+	PCI_SATA_MUXREG,
+	{
+		.reg = PCIE_SATA_CFG,
+		.mask = PCIE_CFG_VAL(2),
+		.val = PCIE_CFG_VAL(2),
+	},
+};
+
+static struct spear_modemux pcie2_modemux[] = {
+	{
+		.muxregs = pcie2_muxreg,
+		.nmuxregs = ARRAY_SIZE(pcie2_muxreg),
+	},
+};
+
+static struct spear_pingroup pcie2_pingroup = {
+	.name = "pcie2_grp",
+	.pins = pci_sata_pins,
+	.npins = ARRAY_SIZE(pci_sata_pins),
+	.modemuxs = pcie2_modemux,
+	.nmodemuxs = ARRAY_SIZE(pcie2_modemux),
+};
+
+static const char *const pci_grps[] = { "pcie0_grp", "pcie1_grp", "pcie2_grp" };
+static struct spear_function pci_function = {
+	.name = "pci",
+	.groups = pci_grps,
+	.ngroups = ARRAY_SIZE(pci_grps),
+};
+
+/* pad multiplexing for sata0 device */
+static struct spear_muxreg sata0_muxreg[] = {
+	PCI_SATA_MUXREG,
+	{
+		.reg = PCIE_SATA_CFG,
+		.mask = SATA_CFG_VAL(0),
+		.val = SATA_CFG_VAL(0),
+	},
+};
+
+static struct spear_modemux sata0_modemux[] = {
+	{
+		.muxregs = sata0_muxreg,
+		.nmuxregs = ARRAY_SIZE(sata0_muxreg),
+	},
+};
+
+static struct spear_pingroup sata0_pingroup = {
+	.name = "sata0_grp",
+	.pins = pci_sata_pins,
+	.npins = ARRAY_SIZE(pci_sata_pins),
+	.modemuxs = sata0_modemux,
+	.nmodemuxs = ARRAY_SIZE(sata0_modemux),
+};
+
+/* pad multiplexing for sata1 device */
+static struct spear_muxreg sata1_muxreg[] = {
+	PCI_SATA_MUXREG,
+	{
+		.reg = PCIE_SATA_CFG,
+		.mask = SATA_CFG_VAL(1),
+		.val = SATA_CFG_VAL(1),
+	},
+};
+
+static struct spear_modemux sata1_modemux[] = {
+	{
+		.muxregs = sata1_muxreg,
+		.nmuxregs = ARRAY_SIZE(sata1_muxreg),
+	},
+};
+
+static struct spear_pingroup sata1_pingroup = {
+	.name = "sata1_grp",
+	.pins = pci_sata_pins,
+	.npins = ARRAY_SIZE(pci_sata_pins),
+	.modemuxs = sata1_modemux,
+	.nmodemuxs = ARRAY_SIZE(sata1_modemux),
+};
+
+/* pad multiplexing for sata2 device */
+static struct spear_muxreg sata2_muxreg[] = {
+	PCI_SATA_MUXREG,
+	{
+		.reg = PCIE_SATA_CFG,
+		.mask = SATA_CFG_VAL(2),
+		.val = SATA_CFG_VAL(2),
+	},
+};
+
+static struct spear_modemux sata2_modemux[] = {
+	{
+		.muxregs = sata2_muxreg,
+		.nmuxregs = ARRAY_SIZE(sata2_muxreg),
+	},
+};
+
+static struct spear_pingroup sata2_pingroup = {
+	.name = "sata2_grp",
+	.pins = pci_sata_pins,
+	.npins = ARRAY_SIZE(pci_sata_pins),
+	.modemuxs = sata2_modemux,
+	.nmodemuxs = ARRAY_SIZE(sata2_modemux),
+};
+
+static const char *const sata_grps[] = { "sata0_grp", "sata1_grp", "sata2_grp"
+};
+static struct spear_function sata_function = {
+	.name = "sata",
+	.groups = sata_grps,
+	.ngroups = ARRAY_SIZE(sata_grps),
+};
+
+/* Pad multiplexing for ssp1_dis_kbd device */
+static const unsigned ssp1_dis_kbd_pins[] = { 203, 204, 205, 206 };
+static struct spear_muxreg ssp1_dis_kbd_muxreg[] = {
+	{
+		.reg = PAD_FUNCTION_EN_1,
+		.mask = PMX_KBD_ROWCOL25_MASK | PMX_KBD_COL1_MASK |
+			PMX_KBD_COL0_MASK | PMX_NFIO8_15_MASK | PMX_NFCE1_MASK |
+			PMX_NFCE2_MASK,
+		.val = 0,
+	},
+};
+
+static struct spear_modemux ssp1_dis_kbd_modemux[] = {
+	{
+		.muxregs = ssp1_dis_kbd_muxreg,
+		.nmuxregs = ARRAY_SIZE(ssp1_dis_kbd_muxreg),
+	},
+};
+
+static struct spear_pingroup ssp1_dis_kbd_pingroup = {
+	.name = "ssp1_dis_kbd_grp",
+	.pins = ssp1_dis_kbd_pins,
+	.npins = ARRAY_SIZE(ssp1_dis_kbd_pins),
+	.modemuxs = ssp1_dis_kbd_modemux,
+	.nmodemuxs = ARRAY_SIZE(ssp1_dis_kbd_modemux),
+};
+
+/* Pad multiplexing for ssp1_dis_sd device */
+static const unsigned ssp1_dis_sd_pins[] = { 224, 226, 227, 228 };
+static struct spear_muxreg ssp1_dis_sd_muxreg[] = {
+	{
+		.reg = PAD_FUNCTION_EN_2,
+		.mask = PMX_MCIADDR0ALE_MASK | PMX_MCIADDR2_MASK |
+			PMX_MCICECF_MASK | PMX_MCICEXD_MASK,
+		.val = 0,
+	},
+};
+
+static struct spear_modemux ssp1_dis_sd_modemux[] = {
+	{
+		.muxregs = ssp1_dis_sd_muxreg,
+		.nmuxregs = ARRAY_SIZE(ssp1_dis_sd_muxreg),
+	},
+};
+
+static struct spear_pingroup ssp1_dis_sd_pingroup = {
+	.name = "ssp1_dis_sd_grp",
+	.pins = ssp1_dis_sd_pins,
+	.npins = ARRAY_SIZE(ssp1_dis_sd_pins),
+	.modemuxs = ssp1_dis_sd_modemux,
+	.nmodemuxs = ARRAY_SIZE(ssp1_dis_sd_modemux),
+};
+
+static const char *const ssp1_grps[] = { "ssp1_dis_kbd_grp",
+	"ssp1_dis_sd_grp" };
+static struct spear_function ssp1_function = {
+	.name = "ssp1",
+	.groups = ssp1_grps,
+	.ngroups = ARRAY_SIZE(ssp1_grps),
+};
+
+/* Pad multiplexing for gpt64 device */
+static const unsigned gpt64_pins[] = { 230, 231, 232, 245 };
+static struct spear_muxreg gpt64_muxreg[] = {
+	{
+		.reg = PAD_FUNCTION_EN_2,
+		.mask = PMX_MCICDCF1_MASK | PMX_MCICDCF2_MASK | PMX_MCICDXD_MASK
+			| PMX_MCILEDS_MASK,
+		.val = 0,
+	},
+};
+
+static struct spear_modemux gpt64_modemux[] = {
+	{
+		.muxregs = gpt64_muxreg,
+		.nmuxregs = ARRAY_SIZE(gpt64_muxreg),
+	},
+};
+
+static struct spear_pingroup gpt64_pingroup = {
+	.name = "gpt64_grp",
+	.pins = gpt64_pins,
+	.npins = ARRAY_SIZE(gpt64_pins),
+	.modemuxs = gpt64_modemux,
+	.nmodemuxs = ARRAY_SIZE(gpt64_modemux),
+};
+
+static const char *const gpt64_grps[] = { "gpt64_grp" };
+static struct spear_function gpt64_function = {
+	.name = "gpt64",
+	.groups = gpt64_grps,
+	.ngroups = ARRAY_SIZE(gpt64_grps),
+};
+
+/* pingroups */
+static struct spear_pingroup *spear1310_pingroups[] = {
+	&i2c0_pingroup,
+	&ssp0_pingroup,
+	&i2s0_pingroup,
+	&i2s1_pingroup,
+	&clcd_pingroup,
+	&clcd_high_res_pingroup,
+	&arm_gpio_pingroup,
+	&smi_2_chips_pingroup,
+	&smi_4_chips_pingroup,
+	&gmii_pingroup,
+	&rgmii_pingroup,
+	&smii_0_1_2_pingroup,
+	&ras_mii_txclk_pingroup,
+	&nand_8bit_pingroup,
+	&nand_16bit_pingroup,
+	&nand_4_chips_pingroup,
+	&keyboard_6x6_pingroup,
+	&keyboard_rowcol6_8_pingroup,
+	&uart0_pingroup,
+	&uart0_modem_pingroup,
+	&gpt0_tmr0_pingroup,
+	&gpt0_tmr1_pingroup,
+	&gpt1_tmr0_pingroup,
+	&gpt1_tmr1_pingroup,
+	&sdhci_pingroup,
+	&cf_pingroup,
+	&xd_pingroup,
+	&touch_xy_pingroup,
+	&ssp0_cs0_pingroup,
+	&ssp0_cs1_2_pingroup,
+	&uart_1_dis_i2c_pingroup,
+	&uart_1_dis_sd_pingroup,
+	&uart_2_3_pingroup,
+	&uart_4_pingroup,
+	&uart_5_pingroup,
+	&rs485_0_1_tdm_0_1_pingroup,
+	&i2c_1_2_pingroup,
+	&i2c3_dis_smi_clcd_pingroup,
+	&i2c3_dis_sd_i2s0_pingroup,
+	&i2c_4_5_dis_smi_pingroup,
+	&i2c4_dis_sd_pingroup,
+	&i2c5_dis_sd_pingroup,
+	&i2c_6_7_dis_kbd_pingroup,
+	&i2c6_dis_sd_pingroup,
+	&i2c7_dis_sd_pingroup,
+	&can0_dis_nor_pingroup,
+	&can0_dis_sd_pingroup,
+	&can1_dis_sd_pingroup,
+	&can1_dis_kbd_pingroup,
+	&pcie0_pingroup,
+	&pcie1_pingroup,
+	&pcie2_pingroup,
+	&sata0_pingroup,
+	&sata1_pingroup,
+	&sata2_pingroup,
+	&ssp1_dis_kbd_pingroup,
+	&ssp1_dis_sd_pingroup,
+	&gpt64_pingroup,
+};
+
+/* functions */
+static struct spear_function *spear1310_functions[] = {
+	&i2c0_function,
+	&ssp0_function,
+	&i2s0_function,
+	&i2s1_function,
+	&clcd_function,
+	&arm_gpio_function,
+	&smi_function,
+	&gmii_function,
+	&rgmii_function,
+	&smii_0_1_2_function,
+	&ras_mii_txclk_function,
+	&nand_function,
+	&keyboard_function,
+	&uart0_function,
+	&gpt0_function,
+	&gpt1_function,
+	&sdhci_function,
+	&cf_function,
+	&xd_function,
+	&touch_xy_function,
+	&uart1_function,
+	&uart2_3_function,
+	&uart4_function,
+	&uart5_function,
+	&rs485_0_1_tdm_0_1_function,
+	&i2c_1_2_function,
+	&i2c3_unction,
+	&i2c_4_5_function,
+	&i2c_6_7_function,
+	&can0_function,
+	&can1_function,
+	&pci_function,
+	&sata_function,
+	&ssp1_function,
+	&gpt64_function,
+};
+
+static struct spear_pinctrl_machdata spear1310_machdata = {
+	.pins = spear1310_pins,
+	.npins = ARRAY_SIZE(spear1310_pins),
+	.groups = spear1310_pingroups,
+	.ngroups = ARRAY_SIZE(spear1310_pingroups),
+	.functions = spear1310_functions,
+	.nfunctions = ARRAY_SIZE(spear1310_functions),
+	.modes_supported = false,
+};
+
+static struct of_device_id spear1310_pinctrl_of_match[] __devinitdata = {
+	{
+		.compatible = "st,spear1310-pinmux",
+	},
+	{},
+};
+
+static int __devinit spear1310_pinctrl_probe(struct platform_device *pdev)
+{
+	return spear_pinctrl_probe(pdev, &spear1310_machdata);
+}
+
+static int __devexit spear1310_pinctrl_remove(struct platform_device *pdev)
+{
+	return spear_pinctrl_remove(pdev);
+}
+
+static struct platform_driver spear1310_pinctrl_driver = {
+	.driver = {
+		.name = DRIVER_NAME,
+		.owner = THIS_MODULE,
+		.of_match_table = spear1310_pinctrl_of_match,
+	},
+	.probe = spear1310_pinctrl_probe,
+	.remove = __devexit_p(spear1310_pinctrl_remove),
+};
+
+static int __init spear1310_pinctrl_init(void)
+{
+	return platform_driver_register(&spear1310_pinctrl_driver);
+}
+arch_initcall(spear1310_pinctrl_init);
+
+static void __exit spear1310_pinctrl_exit(void)
+{
+	platform_driver_unregister(&spear1310_pinctrl_driver);
+}
+module_exit(spear1310_pinctrl_exit);
+
+MODULE_AUTHOR("Viresh Kumar <viresh.kumar@st.com>");
+MODULE_DESCRIPTION("ST Microelectronics SPEAr1310 pinctrl driver");
+MODULE_LICENSE("GPL v2");
+MODULE_DEVICE_TABLE(of, spear1310_pinctrl_of_match);

drivers/pinctrl/spear/pinctrl-spear1340.c

+/*
+ * Driver for the ST Microelectronics SPEAr1340 pinmux
+ *
+ * Copyright (C) 2012 ST Microelectronics
+ * Viresh Kumar <viresh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include "pinctrl-spear.h"
+
+#define DRIVER_NAME "spear1340-pinmux"
+
+/* pins */
+static const struct pinctrl_pin_desc spear1340_pins[] = {
+	SPEAR_PIN_0_TO_101,
+	SPEAR_PIN_102_TO_245,
+	PINCTRL_PIN(246, "PLGPIO246"),
+	PINCTRL_PIN(247, "PLGPIO247"),
+	PINCTRL_PIN(248, "PLGPIO248"),
+	PINCTRL_PIN(249, "PLGPIO249"),
+	PINCTRL_PIN(250, "PLGPIO250"),
+	PINCTRL_PIN(251, "PLGPIO251"),
+};
+
+/* In SPEAr1340 there are two levels of pad muxing */
+/* - pads as gpio OR peripherals */
+#define PAD_FUNCTION_EN_1			0x668
+#define PAD_FUNCTION_EN_2			0x66C
+#define PAD_FUNCTION_EN_3			0x670
+#define PAD_FUNCTION_EN_4			0x674
+#define PAD_FUNCTION_EN_5			0x690
+#define PAD_FUNCTION_EN_6			0x694
+#define PAD_FUNCTION_EN_7			0x698
+#define PAD_FUNCTION_EN_8			0x69C
+
+/* - If peripherals, then primary OR alternate peripheral */
+#define PAD_SHARED_IP_EN_1			0x6A0
+#define PAD_SHARED_IP_EN_2			0x6A4
+
+/*
+ * Macro's for first level of pmx - pads as gpio OR peripherals. There are 8
+ * registers with 32 bits each for handling gpio pads, register 8 has only 26
+ * relevant bits.
+ */
+/* macro's for making pads as gpio's */
+#define PADS_AS_GPIO_REG0_MASK			0xFFFFFFFE
+#define PADS_AS_GPIO_REGS_MASK			0xFFFFFFFF
+#define PADS_AS_GPIO_REG7_MASK			0x07FFFFFF
+
+/* macro's for making pads as peripherals */
+#define FSMC_16_BIT_AND_KBD_ROW_COL_REG0_MASK	0x00000FFE
+#define UART0_ENH_AND_GPT_REG0_MASK		0x0003F000
+#define PWM1_AND_KBD_COL5_REG0_MASK		0x00040000
+#define I2C1_REG0_MASK				0x01080000
+#define SPDIF_IN_REG0_MASK			0x00100000
+#define PWM2_AND_GPT0_TMR0_CPT_REG0_MASK	0x00400000
+#define PWM3_AND_GPT0_TMR1_CLK_REG0_MASK	0x00800000
+#define PWM0_AND_SSP0_CS1_REG0_MASK		0x02000000
+#define VIP_AND_CAM3_REG0_MASK			0xFC200000
+#define VIP_AND_CAM3_REG1_MASK			0x0000000F
+#define VIP_REG1_MASK				0x00001EF0
+#define VIP_AND_CAM2_REG1_MASK			0x007FE100
+#define VIP_AND_CAM1_REG1_MASK			0xFF800000
+#define VIP_AND_CAM1_REG2_MASK			0x00000003
+#define VIP_AND_CAM0_REG2_MASK			0x00001FFC
+#define SMI_REG2_MASK				0x0021E000
+#define SSP0_REG2_MASK				0x001E0000
+#define TS_AND_SSP0_CS2_REG2_MASK		0x00400000
+#define UART0_REG2_MASK				0x01800000
+#define UART1_REG2_MASK				0x06000000
+#define I2S_IN_REG2_MASK			0xF8000000
+#define DEVS_GRP_AND_MIPHY_DBG_REG3_MASK	0x000001FE
+#define I2S_OUT_REG3_MASK			0x000001EF
+#define I2S_IN_REG3_MASK			0x00000010
+#define GMAC_REG3_MASK				0xFFFFFE00
+#define GMAC_REG4_MASK				0x0000001F
+#define DEVS_GRP_AND_MIPHY_DBG_REG4_MASK	0x7FFFFF20
+#define SSP0_CS3_REG4_MASK			0x00000020
+#define I2C0_REG4_MASK				0x000000C0
+#define CEC0_REG4_MASK				0x00000100
+#define CEC1_REG4_MASK				0x00000200
+#define SPDIF_OUT_REG4_MASK			0x00000400
+#define CLCD_REG4_MASK				0x7FFFF800
+#define CLCD_AND_ARM_TRACE_REG4_MASK		0x80000000
+#define CLCD_AND_ARM_TRACE_REG5_MASK		0xFFFFFFFF
+#define CLCD_AND_ARM_TRACE_REG6_MASK		0x00000001
+#define FSMC_PNOR_AND_MCIF_REG6_MASK		0x073FFFFE
+#define MCIF_REG6_MASK				0xF8C00000
+#define MCIF_REG7_MASK				0x000043FF
+#define FSMC_8BIT_REG7_MASK			0x07FFBC00
+
+/* other registers */
+#define PERIP_CFG				0x42C
+	/* PERIP_CFG register masks */
+	#define SSP_CS_CTL_HW			0
+	#define SSP_CS_CTL_SW			1
+	#define SSP_CS_CTL_MASK			1
+	#define SSP_CS_CTL_SHIFT		21
+	#define SSP_CS_VAL_MASK			1
+	#define SSP_CS_VAL_SHIFT		20
+	#define SSP_CS_SEL_CS0			0
+	#define SSP_CS_SEL_CS1			1
+	#define SSP_CS_SEL_CS2			2
+	#define SSP_CS_SEL_MASK			3
+	#define SSP_CS_SEL_SHIFT		18
+
+	#define I2S_CHNL_2_0			(0)
+	#define I2S_CHNL_3_1			(1)
+	#define I2S_CHNL_5_1			(2)
+	#define I2S_CHNL_7_1			(3)
+	#define I2S_CHNL_PLAY_SHIFT		(4)
+	#define I2S_CHNL_PLAY_MASK		(3 << 4)
+	#define I2S_CHNL_REC_SHIFT		(6)
+	#define I2S_CHNL_REC_MASK		(3 << 6)
+
+	#define SPDIF_OUT_ENB_MASK		(1 << 2)
+	#define SPDIF_OUT_ENB_SHIFT		2
+
+	#define MCIF_SEL_SD			1
+	#define MCIF_SEL_CF			2
+	#define MCIF_SEL_XD			3
+	#define MCIF_SEL_MASK			3
+	#define MCIF_SEL_SHIFT			0
+
+#define GMAC_CLK_CFG				0x248
+	#define GMAC_PHY_IF_GMII_VAL		(0 << 3)
+	#define GMAC_PHY_IF_RGMII_VAL		(1 << 3)
+	#define GMAC_PHY_IF_SGMII_VAL		(2 << 3)
+	#define GMAC_PHY_IF_RMII_VAL		(4 << 3)
+	#define GMAC_PHY_IF_SEL_MASK		(7 << 3)
+	#define GMAC_PHY_INPUT_ENB_VAL		0
+	#define GMAC_PHY_SYNT_ENB_VAL		1
+	#define GMAC_PHY_CLK_MASK		1
+	#define GMAC_PHY_CLK_SHIFT		2
+	#define GMAC_PHY_125M_PAD_VAL		0
+	#define GMAC_PHY_PLL2_VAL		1
+	#define GMAC_PHY_OSC3_VAL		2
+	#define GMAC_PHY_INPUT_CLK_MASK		3
+	#define GMAC_PHY_INPUT_CLK_SHIFT	0
+
+#define PCIE_SATA_CFG				0x424
+	/* PCIE CFG MASks */
+	#define PCIE_CFG_DEVICE_PRESENT		(1 << 11)
+	#define PCIE_CFG_POWERUP_RESET		(1 << 10)
+	#define PCIE_CFG_CORE_CLK_EN		(1 << 9)
+	#define PCIE_CFG_AUX_CLK_EN		(1 << 8)
+	#define SATA_CFG_TX_CLK_EN		(1 << 4)
+	#define SATA_CFG_RX_CLK_EN		(1 << 3)
+	#define SATA_CFG_POWERUP_RESET		(1 << 2)
+	#define SATA_CFG_PM_CLK_EN		(1 << 1)
+	#define PCIE_SATA_SEL_PCIE		(0)
+	#define PCIE_SATA_SEL_SATA		(1)
+	#define SATA_PCIE_CFG_MASK		0xF1F
+	#define PCIE_CFG_VAL	(PCIE_SATA_SEL_PCIE | PCIE_CFG_AUX_CLK_EN | \
+				PCIE_CFG_CORE_CLK_EN | PCIE_CFG_POWERUP_RESET |\
+				PCIE_CFG_DEVICE_PRESENT)
+	#define SATA_CFG_VAL	(PCIE_SATA_SEL_SATA | SATA_CFG_PM_CLK_EN | \
+				SATA_CFG_POWERUP_RESET | SATA_CFG_RX_CLK_EN | \
+				SATA_CFG_TX_CLK_EN)
+
+/* Macro's for second level of pmx - pads as primary OR alternate peripheral */
+/* Write 0 to enable FSMC_16_BIT */
+#define KBD_ROW_COL_MASK			(1 << 0)
+
+/* Write 0 to enable UART0_ENH */
+#define GPT_MASK				(1 << 1) /* Only clk & cpt */
+
+/* Write 0 to enable PWM1 */
+#define KBD_COL5_MASK				(1 << 2)
+
+/* Write 0 to enable PWM2 */
+#define GPT0_TMR0_CPT_MASK			(1 << 3) /* Only clk & cpt */
+
+/* Write 0 to enable PWM3 */
+#define GPT0_TMR1_CLK_MASK			(1 << 4) /* Only clk & cpt */
+
+/* Write 0 to enable PWM0 */
+#define SSP0_CS1_MASK				(1 << 5)
+
+/* Write 0 to enable VIP */
+#define CAM3_MASK				(1 << 6)
+
+/* Write 0 to enable VIP */
+#define CAM2_MASK				(1 << 7)
+
+/* Write 0 to enable VIP */
+#define CAM1_MASK				(1 << 8)
+
+/* Write 0 to enable VIP */
+#define CAM0_MASK				(1 << 9)
+
+/* Write 0 to enable TS */
+#define SSP0_CS2_MASK				(1 << 10)
+
+/* Write 0 to enable FSMC PNOR */
+#define MCIF_MASK				(1 << 11)
+
+/* Write 0 to enable CLCD */
+#define ARM_TRACE_MASK				(1 << 12)
+
+/* Write 0 to enable I2S, SSP0_CS2, CEC0, 1, SPDIF out, CLCD */
+#define MIPHY_DBG_MASK				(1 << 13)
+
+/*
+ * Pad multiplexing for making all pads as gpio's. This is done to override the
+ * values passed from bootloader and start from scratch.
+ */
+static const unsigned pads_as_gpio_pins[] = { 251 };
+static struct spear_muxreg pads_as_gpio_muxreg[] = {
+	{
+		.reg = PAD_FUNCTION_EN_1,
+		.mask = PADS_AS_GPIO_REG0_MASK,
+		.val = 0x0,
+	}, {
+		.reg = PAD_FUNCTION_EN_2,
+		.mask = PADS_AS_GPIO_REGS_MASK,
+		.val = 0x0,
+	}, {
+		.reg = PAD_FUNCTION_EN_3,
+		.mask = PADS_AS_GPIO_REGS_MASK,
+		.val = 0x0,
+	}, {
+		.reg = PAD_FUNCTION_EN_4,
+		.mask = PADS_AS_GPIO_REGS_MASK,
+		.val = 0x0,
+	}, {
+		.reg = PAD_FUNCTION_EN_5,
+		.mask = PADS_AS_GPIO_REGS_MASK,
+		.val = 0x0,
+	}, {
+		.reg = PAD_FUNCTION_EN_6,
+		.mask = PADS_AS_GPIO_REGS_MASK,
+		.val = 0x0,
+	}, {
+		.reg = PAD_FUNCTION_EN_7,
+		.mask = PADS_AS_GPIO_REGS_MASK,
+		.val = 0x0,
+	}, {
+		.reg = PAD_FUNCTION_EN_8,
+		.mask = PADS_AS_GPIO_REG7_MASK,
+		.val = 0x0,
+	},
+};
+
+static struct spear_modemux pads_as_gpio_modemux[] = {
+	{
+		.muxregs = pads_as_gpio_muxreg,
+		.nmuxregs = ARRAY_SIZE(pads_as_gpio_muxreg),
+	},
+};
+
+static struct spear_pingroup pads_as_gpio_pingroup = {
+	.name = "pads_as_gpio_grp",
+	.pins = pads_as_gpio_pins,
+	.npins = ARRAY_SIZE(pads_as_gpio_pins),
+	.modemuxs = pads_as_gpio_modemux,
+	.nmodemuxs = ARRAY_SIZE(pads_as_gpio_modemux),
+};
+
+static const char *const pads_as_gpio_grps[] = { "pads_as_gpio_grp" };
+static struct spear_function pads_as_gpio_function = {
+	.name = "pads_as_gpio",
+	.groups = pads_as_gpio_grps,
+	.ngroups = ARRAY_SIZE(pads_as_gpio_grps),
+};
+
+/* Pad multiplexing for fsmc_8bit device */
+static const unsigned fsmc_8bit_pins[] = { 233, 234, 235, 236, 238, 239, 240,
+	241, 242, 243, 244, 245, 246, 247, 248, 249 };
+static struct spear_muxreg fsmc_8bit_muxreg[] = {
+	{
+		.reg = PAD_FUNCTION_EN_8,
+		.mask = FSMC_8BIT_REG7_MASK,
+		.val = FSMC_8BIT_REG7_MASK,
+	}
+};
+
+static struct spear_modemux fsmc_8bit_modemux[] = {
+	{
+		.muxregs = fsmc_8bit_muxreg,
+		.nmuxregs = ARRAY_SIZE(fsmc_8bit_muxreg),
+	},
+};
+
+static struct spear_pingroup fsmc_8bit_pingroup = {
+	.name = "fsmc_8bit_grp",
+	.pins = fsmc_8bit_pins,
+	.npins = ARRAY_SIZE(fsmc_8bit_pins),
+	.modemuxs = fsmc_8bit_modemux,
+	.nmodemuxs = ARRAY_SIZE(fsmc_8bit_modemux),
+};
+
+/* Pad multiplexing for fsmc_16bit device */
+static const unsigned fsmc_16bit_pins[] = { 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10 };
+static struct spear_muxreg fsmc_16bit_muxreg[] = {
+	{
+		.reg = PAD_SHARED_IP_EN_1,
+		.mask = KBD_ROW_COL_MASK,
+		.val = 0,
+	}, {
+		.reg = PAD_FUNCTION_EN_1,
+		.mask = FSMC_16_BIT_AND_KBD_ROW_COL_REG0_MASK,
+		.val = FSMC_16_BIT_AND_KBD_ROW_COL_REG0_MASK,
+	},
+};
+
+static struct spear_modemux fsmc_16bit_modemux[] = {
+	{
+		.muxregs = fsmc_16bit_muxreg,
+		.nmuxregs = ARRAY_SIZE(fsmc_16bit_muxreg),
+	},
+};
+
+static struct spear_pingroup fsmc_16bit_pingroup = {
+	.name = "fsmc_16bit_grp",
+	.pins = fsmc_16bit_pins,
+	.npins = ARRAY_SIZE(fsmc_16bit_pins),
+	.modemuxs = fsmc_16bit_modemux,
+	.nmodemuxs = ARRAY_SIZE(fsmc_16bit_modemux),
+};
+
+/* pad multiplexing for fsmc_pnor device */
+static const unsigned fsmc_pnor_pins[] = { 192, 193, 194, 195, 196, 197, 198,
+	199, 200, 201, 202, 203, 204, 205, 206, 207, 208, 209, 210, 211, 212,
+	215, 216, 217 };
+static struct spear_muxreg fsmc_pnor_muxreg[] = {
+	{
+		.reg = PAD_SHARED_IP_EN_1,
+		.mask = MCIF_MASK,
+		.val = 0,
+	}, {
+		.reg = PAD_FUNCTION_EN_7,
+		.mask = FSMC_PNOR_AND_MCIF_REG6_MASK,
+		.val = FSMC_PNOR_AND_MCIF_REG6_MASK,
+	},
+};
+
+static struct spear_modemux fsmc_pnor_modemux[] = {
+	{
+		.muxregs = fsmc_pnor_muxreg,
+		.nmuxregs = ARRAY_SIZE(fsmc_pnor_muxreg),
+	},
+};
+
+static struct spear_pingroup fsmc_pnor_pingroup = {
+	.name = "fsmc_pnor_grp",
+	.pins = fsmc_pnor_pins,
+	.npins = ARRAY_SIZE(fsmc_pnor_pins),
+	.modemuxs = fsmc_pnor_modemux,
+	.nmodemuxs = ARRAY_SIZE(fsmc_pnor_modemux),
+};
+
+static const char *const fsmc_grps[] = { "fsmc_8bit_grp", "fsmc_16bit_grp",
+	"fsmc_pnor_grp" };
+static struct spear_function fsmc_function = {
+	.name = "fsmc",
+	.groups = fsmc_grps,
+	.ngroups = ARRAY_SIZE(fsmc_grps),
+};
+
+/* pad multiplexing for keyboard rows-cols device */
+static const unsigned keyboard_row_col_pins[] = { 0, 1, 2, 3, 4, 5, 6, 7, 8, 9,
+	10 };
+static struct spear_muxreg keyboard_row_col_muxreg[] = {
+	{
+		.reg = PAD_SHARED_IP_EN_1,
+		.mask = KBD_ROW_COL_MASK,
+		.val = KBD_ROW_COL_MASK,
+	}, {
+		.reg = PAD_FUNCTION_EN_1,
+		.mask = FSMC_16_BIT_AND_KBD_ROW_COL_REG0_MASK,
+		.val = FSMC_16_BIT_AND_KBD_ROW_COL_REG0_MASK,
+	},
+};
+
+static struct spear_modemux keyboard_row_col_modemux[] = {
+	{
+		.muxregs = keyboard_row_col_muxreg,
+		.nmuxregs = ARRAY_SIZE(keyboard_row_col_muxreg),
+	},
+};
+
+static struct spear_pingroup keyboard_row_col_pingroup = {
+	.name = "keyboard_row_col_grp",
+	.pins = keyboard_row_col_pins,
+	.npins = ARRAY_SIZE(keyboard_row_col_pins),
+	.modemuxs = keyboard_row_col_modemux,
+	.nmodemuxs = ARRAY_SIZE(keyboard_row_col_modemux),
+};
+
+/* pad multiplexing for keyboard col5 device */
+static const unsigned keyboard_col5_pins[] = { 17 };
+static struct spear_muxreg keyboard_col5_muxreg[] = {
+	{
+		.reg = PAD_SHARED_IP_EN_1,
+		.mask = KBD_COL5_MASK,
+		.val = KBD_COL5_MASK,
+	}, {
+		.reg = PAD_FUNCTION_EN_1,
+		.mask = PWM1_AND_KBD_COL5_REG0_MASK,
+		.val = PWM1_AND_KBD_COL5_REG0_MASK,
+	},
+};
+
+static struct spear_modemux keyboard_col5_modemux[] = {
+	{
+		.muxregs = keyboard_col5_muxreg,
+		.nmuxregs = ARRAY_SIZE(keyboard_col5_muxreg),
+	},
+};
+
+static struct spear_pingroup keyboard_col5_pingroup = {
+	.name = "keyboard_col5_grp",
+	.pins = keyboard_col5_pins,
+	.npins = ARRAY_SIZE(keyboard_col5_pins),
+	.modemuxs = keyboard_col5_modemux,
+	.nmodemuxs = ARRAY_SIZE(keyboard_col5_modemux),
+};
+
+static const char *const keyboard_grps[] = { "keyboard_row_col_grp",
+	"keyboard_col5_grp" };
+static struct spear_function keyboard_function = {
+	.name = "keyboard",
+	.groups = keyboard_grps,
+	.ngroups = ARRAY_SIZE(keyboard_grps),
+};
+
+/* pad multiplexing for spdif_in device */
+static const unsigned spdif_in_pins[] = { 19 };
+static struct spear_muxreg spdif_in_muxreg[] = {
+	{
+		.reg = PAD_FUNCTION_EN_1,
+		.mask = SPDIF_IN_REG0_MASK,
+		.val = SPDIF_IN_REG0_MASK,
+	},
+};
+
+static struct spear_modemux spdif_in_modemux[] = {
+	{
+		.muxregs = spdif_in_muxreg,
+		.nmuxregs = ARRAY_SIZE(spdif_in_muxreg),
+	},
+};
+
+static struct spear_pingroup spdif_in_pingroup = {
+	.name = "spdif_in_grp",
+	.pins = spdif_in_pins,
+	.npins = ARRAY_SIZE(spdif_in_pins),
+	.modemuxs = spdif_in_modemux,
+	.nmodemuxs = ARRAY_SIZE(spdif_in_modemux),
+};
+
+static const char *const spdif_in_grps[] = { "spdif_in_grp" };
+static struct spear_function spdif_in_function = {
+	.name = "spdif_in",
+	.groups = spdif_in_grps,
+	.ngroups = ARRAY_SIZE(spdif_in_grps),
+};
+
+/* pad multiplexing for spdif_out device */
+static const unsigned spdif_out_pins[] = { 137 };
+static struct spear_muxreg spdif_out_muxreg[] = {
+	{
+		.reg = PAD_FUNCTION_EN_5,
+		.mask = SPDIF_OUT_REG4_MASK,
+		.val = SPDIF_OUT_REG4_MASK,
+	}, {
+		.reg = PERIP_CFG,
+		.mask = SPDIF_OUT_ENB_MASK,
+		.val = SPDIF_OUT_ENB_MASK,
+	}
+};
+
+static struct spear_modemux spdif_out_modemux[] = {
+	{
+		.muxregs = spdif_out_muxreg,
+		.nmuxregs = ARRAY_SIZE(spdif_out_muxreg),
+	},
+};
+
+static struct spear_pingroup spdif_out_pingroup = {
+	.name = "spdif_out_grp",
+	.pins = spdif_out_pins,
+	.npins = ARRAY_SIZE(spdif_out_pins),
+	.modemuxs = spdif_out_modemux,
+	.nmodemuxs = ARRAY_SIZE(spdif_out_modemux),
+};
+
+static const char *const spdif_out_grps[] = { "spdif_out_grp" };
+static struct spear_function spdif_out_function = {
+	.name = "spdif_out",
+	.groups = spdif_out_grps,
+	.ngroups = ARRAY_SIZE(spdif_out_grps),
+};
+
+/* pad multiplexing for gpt_0_1 device */
+static const unsigned gpt_0_1_pins[] = { 11, 12, 13, 14, 15, 16, 21, 22 };
+static struct spear_muxreg gpt_0_1_muxreg[] = {
+	{
+		.reg = PAD_SHARED_IP_EN_1,
+		.mask = GPT_MASK | GPT0_TMR0_CPT_MASK | GPT0_TMR1_CLK_MASK,
+		.val = GPT_MASK | GPT0_TMR0_CPT_MASK | GPT0_TMR1_CLK_MASK,
+	}, {
+		.reg = PAD_FUNCTION_EN_1,
+		.mask = UART0_ENH_AND_GPT_REG0_MASK |
+			PWM2_AND_GPT0_TMR0_CPT_REG0_MASK |
+			PWM3_AND_GPT0_TMR1_CLK_REG0_MASK,
+		.val = UART0_ENH_AND_GPT_REG0_MASK |
+			PWM2_AND_GPT0_TMR0_CPT_REG0_MASK |
+			PWM3_AND_GPT0_TMR1_CLK_REG0_MASK,
+	},
+};
+
+static struct spear_modemux gpt_0_1_modemux[] = {
+	{
+		.muxregs = gpt_0_1_muxreg,
+		.nmuxregs = ARRAY_SIZE(gpt_0_1_muxreg),
+	},
+};
+
+static struct spear_pingroup gpt_0_1_pingroup = {
+	.name = "gpt_0_1_grp",
+	.pins = gpt_0_1_pins,
+	.npins = ARRAY_SIZE(gpt_0_1_pins),
+	.modemuxs = gpt_0_1_modemux,
+	.nmodemuxs = ARRAY_SIZE(gpt_0_1_modemux),
+};
+
+static const char *const gpt_0_1_grps[] = { "gpt_0_1_grp" };
+static struct spear_function gpt_0_1_function = {
+	.name = "gpt_0_1",
+	.groups = gpt_0_1_grps,
+	.ngroups = ARRAY_SIZE(gpt_0_1_grps),
+};
+
+/* pad multiplexing for pwm0 device */
+static const unsigned pwm0_pins[] = { 24 };
+static struct spear_muxreg pwm0_muxreg[] = {
+	{
+		.reg = PAD_SHARED_IP_EN_1,
+		.mask = SSP0_CS1_MASK,
+		.val = 0,
+	}, {
+		.reg = PAD_FUNCTION_EN_1,
+		.mask = PWM0_AND_SSP0_CS1_REG0_MASK,
+		.val = PWM0_AND_SSP0_CS1_REG0_MASK,
+	},
+};
+
+static struct spear_modemux pwm0_modemux[] = {
+	{
+		.muxregs = pwm0_muxreg,
+		.nmuxregs = ARRAY_SIZE(pwm0_muxreg),
+	},
+};
+
+static struct spear_pingroup pwm0_pingroup = {
+	.name = "pwm0_grp",
+	.pins = pwm0_pins,
+	.npins = ARRAY_SIZE(pwm0_pins),
+	.modemuxs = pwm0_modemux,
+	.nmodemuxs = ARRAY_SIZE(pwm0_modemux),
+};
+
+/* pad multiplexing for pwm1 device */
+static const unsigned pwm1_pins[] = { 17 };
+static struct spear_muxreg pwm1_muxreg[] = {
+	{
+		.reg = PAD_SHARED_IP_EN_1,
+		.mask = KBD_COL5_MASK,
+		.val = 0,
+	}, {
+		.reg = PAD_FUNCTION_EN_1,
+		.mask = PWM1_AND_KBD_COL5_REG0_MASK,
+		.val = PWM1_AND_KBD_COL5_REG0_MASK,
+	},
+};
+
+static struct spear_modemux pwm1_modemux[] = {
+	{
+		.muxregs = pwm1_muxreg,
+		.nmuxregs = ARRAY_SIZE(pwm1_muxreg),
+	},
+};
+
+static struct spear_pingroup pwm1_pingroup = {
+	.name = "pwm1_grp",
+	.pins = pwm1_pins,
+	.npins = ARRAY_SIZE(pwm1_pins),
+	.modemuxs = pwm1_modemux,
+	.nmodemuxs = ARRAY_SIZE(pwm1_modemux),
+};
+
+/* pad multiplexing for pwm2 device */
+static const unsigned pwm2_pins[] = { 21 };
+static struct spear_muxreg pwm2_muxreg[] = {
+	{
+		.reg = PAD_SHARED_IP_EN_1,
+		.mask = GPT0_TMR0_CPT_MASK,
+		.val = 0,
+	}, {
+		.reg = PAD_FUNCTION_EN_1,
+		.mask = PWM2_AND_GPT0_TMR0_CPT_REG0_MASK,
+		.val = PWM2_AND_GPT0_TMR0_CPT_REG0_MASK,
+	},
+};
+
+static struct spear_modemux pwm2_modemux[] = {
+	{
+		.muxregs = pwm2_muxreg,
+		.nmuxregs = ARRAY_SIZE(pwm2_muxreg),
+	},
+};
+
+static struct spear_pingroup pwm2_pingroup = {
+	.name = "pwm2_grp",
+	.pins = pwm2_pins,
+	.npins = ARRAY_SIZE(pwm2_pins),
+	.modemuxs = pwm2_modemux,
+	.nmodemuxs = ARRAY_SIZE(pwm2_modemux),
+};
+
+/* pad multiplexing for pwm3 device */
+static const unsigned pwm3_pins[] = { 22 };
+static struct spear_muxreg pwm3_muxreg[] = {
+	{
+		.reg = PAD_SHARED_IP_EN_1,
+		.mask = GPT0_TMR1_CLK_MASK,
+		.val = 0,
+	}, {
+		.reg = PAD_FUNCTION_EN_1,
+		.mask = PWM3_AND_GPT0_TMR1_CLK_REG0_MASK,
+		.val = PWM3_AND_GPT0_TMR1_CLK_REG0_MASK,
+	},
+};
+
+static struct spear_modemux pwm3_modemux[] = {
+	{
+		.muxregs = pwm3_muxreg,
+		.nmuxregs = ARRAY_SIZE(pwm3_muxreg),
+	},
+};
+
+static struct spear_pingroup pwm3_pingroup = {
+	.name = "pwm3_grp",
+	.pins = pwm3_pins,
+	.npins = ARRAY_SIZE(pwm3_pins),
+	.modemuxs = pwm3_modemux,
+	.nmodemuxs = ARRAY_SIZE(pwm3_modemux),
+};
+
+static const char *const pwm_grps[] = { "pwm0_grp", "pwm1_grp", "pwm2_grp",
+	"pwm3_grp" };
+static struct spear_function pwm_function = {
+	.name = "pwm",
+	.groups = pwm_grps,
+	.ngroups = ARRAY_SIZE(pwm_grps),
+};
+
+/* pad multiplexing for vip_mux device */
+static const unsigned vip_mux_pins[] = { 35, 36, 37, 38, 40, 41, 42, 43 };
+static struct spear_muxreg vip_mux_muxreg[] = {
+	{
+		.reg = PAD_FUNCTION_EN_2,
+		.mask = VIP_REG1_MASK,
+		.val = VIP_REG1_MASK,
+	},
+};
+
+static struct spear_modemux vip_mux_modemux[] = {
+	{
+		.muxregs = vip_mux_muxreg,
+		.nmuxregs = ARRAY_SIZE(vip_mux_muxreg),
+	},
+};
+
+static struct spear_pingroup vip_mux_pingroup = {
+	.name = "vip_mux_grp",
+	.pins = vip_mux_pins,
+	.npins = ARRAY_SIZE(vip_mux_pins),
+	.modemuxs = vip_mux_modemux,
+	.nmodemuxs = ARRAY_SIZE(vip_mux_modemux),
+};
+
+/* pad multiplexing for vip_mux_cam0 (disables cam0) device */
+static const unsigned vip_mux_cam0_pins[] = { 65, 66, 67, 68, 69, 70, 71, 72,
+	73, 74, 75 };
+static struct spear_muxreg vip_mux_cam0_muxreg[] = {
+	{
+		.reg = PAD_SHARED_IP_EN_1,
+		.mask = CAM0_MASK,
+		.val = 0,
+	}, {
+		.reg = PAD_FUNCTION_EN_3,
+		.mask = VIP_AND_CAM0_REG2_MASK,
+		.val = VIP_AND_CAM0_REG2_MASK,
+	},
+};
+
+static struct spear_modemux vip_mux_cam0_modemux[] = {
+	{
+		.muxregs = vip_mux_cam0_muxreg,
+		.nmuxregs = ARRAY_SIZE(vip_mux_cam0_muxreg),
+	},
+};
+
+static struct spear_pingroup vip_mux_cam0_pingroup = {
+	.name = "vip_mux_cam0_grp",
+	.pins = vip_mux_cam0_pins,
+	.npins = ARRAY_SIZE(vip_mux_cam0_pins),
+	.modemuxs = vip_mux_cam0_modemux,
+	.nmodemuxs = ARRAY_SIZE(vip_mux_cam0_modemux),
+};
+
+/* pad multiplexing for vip_mux_cam1 (disables cam1) device */
+static const unsigned vip_mux_cam1_pins[] = { 54, 55, 56, 57, 58, 59, 60, 61,
+	62, 63, 64 };
+static struct spear_muxreg vip_mux_cam1_muxreg[] = {
+	{
+		.reg = PAD_SHARED_IP_EN_1,
+		.mask = CAM1_MASK,
+		.val = 0,
+	}, {
+		.reg = PAD_FUNCTION_EN_2,
+		.mask = VIP_AND_CAM1_REG1_MASK,
+		.val = VIP_AND_CAM1_REG1_MASK,
+	}, {
+		.reg = PAD_FUNCTION_EN_3,
+		.mask = VIP_AND_CAM1_REG2_MASK,
+		.val = VIP_AND_CAM1_REG2_MASK,
+	},
+};
+
+static struct spear_modemux vip_mux_cam1_modemux[] = {
+	{
+		.muxregs = vip_mux_cam1_muxreg,
+		.nmuxregs = ARRAY_SIZE(vip_mux_cam1_muxreg),
+	},
+};
+
+static struct spear_pingroup vip_mux_cam1_pingroup = {
+	.name = "vip_mux_cam1_grp",
+	.pins = vip_mux_cam1_pins,
+	.npins = ARRAY_SIZE(vip_mux_cam1_pins),
+	.modemuxs = vip_mux_cam1_modemux,
+	.nmodemuxs = ARRAY_SIZE(vip_mux_cam1_modemux),
+};
+
+/* pad multiplexing for vip_mux_cam2 (disables cam2) device */
+static const unsigned vip_mux_cam2_pins[] = { 39, 44, 45, 46, 47, 48, 49, 50,
+	51, 52, 53 };
+static struct spear_muxreg vip_mux_cam2_muxreg[] = {
+	{
+		.reg = PAD_SHARED_IP_EN_1,
+		.mask = CAM2_MASK,
+		.val = 0,
+	}, {
+		.reg = PAD_FUNCTION_EN_2,
+		.mask = VIP_AND_CAM2_REG1_MASK,
+		.val = VIP_AND_CAM2_REG1_MASK,
+	},
+};
+
+static struct spear_modemux vip_mux_cam2_modemux[] = {
+	{
+		.muxregs = vip_mux_cam2_muxreg,
+		.nmuxregs = ARRAY_SIZE(vip_mux_cam2_muxreg),
+	},
+};
+
+static struct spear_pingroup vip_mux_cam2_pingroup = {
+	.name = "vip_mux_cam2_grp",
+	.pins = vip_mux_cam2_pins,
+	.npins = ARRAY_SIZE(vip_mux_cam2_pins),
+	.modemuxs = vip_mux_cam2_modemux,
+	.nmodemuxs = ARRAY_SIZE(vip_mux_cam2_modemux),
+};
+
+/* pad multiplexing for vip_mux_cam3 (disables cam3) device */
+static const unsigned vip_mux_cam3_pins[] = { 20, 25, 26, 27, 28, 29, 30, 31,
+	32, 33, 34 };
+static struct spear_muxreg vip_mux_cam3_muxreg[] = {
+	{
+		.reg = PAD_SHARED_IP_EN_1,
+		.mask = CAM3_MASK,
+		.val = 0,
+	}, {
+		.reg = PAD_FUNCTION_EN_1,
+		.mask = VIP_AND_CAM3_REG0_MASK,
+		.val = VIP_AND_CAM3_REG0_MASK,
+	}, {
+		.reg = PAD_FUNCTION_EN_2,
+		.mask = VIP_AND_CAM3_REG1_MASK,
+		.val = VIP_AND_CAM3_REG1_MASK,
+	},
+};
+
+static struct spear_modemux vip_mux_cam3_modemux[] = {
+	{
+		.muxregs = vip_mux_cam3_muxreg,
+		.nmuxregs = ARRAY_SIZE(vip_mux_cam3_muxreg),
+	},
+};
+
+static struct spear_pingroup vip_mux_cam3_pingroup = {
+	.name = "vip_mux_cam3_grp",
+	.pins = vip_mux_cam3_pins,
+	.npins = ARRAY_SIZE(vip_mux_cam3_pins),
+	.modemuxs = vip_mux_cam3_modemux,
+	.nmodemuxs = ARRAY_SIZE(vip_mux_cam3_modemux),
+};
+
+static const char *const vip_grps[] = { "vip_mux_grp", "vip_mux_cam0_grp" ,
+	"vip_mux_cam1_grp" , "vip_mux_cam2_grp", "vip_mux_cam3_grp" };
+static struct spear_function vip_function = {
+	.name = "vip",
+	.groups = vip_grps,
+	.ngroups = ARRAY_SIZE(vip_grps),
+};
+
+/* pad multiplexing for cam0 device */
+static const unsigned cam0_pins[] = { 65, 66, 67, 68, 69, 70, 71, 72, 73, 74, 75
+};
+static struct spear_muxreg cam0_muxreg[] = {
+	{
+		.reg = PAD_SHARED_IP_EN_1,
+		.mask = CAM0_MASK,
+		.val = CAM0_MASK,
+	}, {
+		.reg = PAD_FUNCTION_EN_3,
+		.mask = VIP_AND_CAM0_REG2_MASK,
+		.val = VIP_AND_CAM0_REG2_MASK,
+	},
+};
+
+static struct spear_modemux cam0_modemux[] = {
+	{
+		.muxregs = cam0_muxreg,
+		.nmuxregs = ARRAY_SIZE(cam0_muxreg),
+	},
+};
+
+static struct spear_pingroup cam0_pingroup = {
+	.name = "cam0_grp",
+	.pins = cam0_pins,
+	.npins = ARRAY_SIZE(cam0_pins),
+	.modemuxs = cam0_modemux,
+	.nmodemuxs = ARRAY_SIZE(cam0_modemux),
+};
+
+static const char *const cam0_grps[] = { "cam0_grp" };
+static struct spear_function cam0_function = {
+	.name = "cam0",
+	.groups = cam0_grps,
+	.ngroups = ARRAY_SIZE(cam0_grps),
+};
+
+/* pad multiplexing for cam1 device */
+static const unsigned cam1_pins[] = { 54, 55, 56, 57, 58, 59, 60, 61, 62, 63, 64
+};
+static struct spear_muxreg cam1_muxreg[] = {
+	{
+		.reg = PAD_SHARED_IP_EN_1,
+		.mask = CAM1_MASK,
+		.val = CAM1_MASK,
+	}, {
+		.reg = PAD_FUNCTION_EN_2,
+		.mask = VIP_AND_CAM1_REG1_MASK,
+		.val = VIP_AND_CAM1_REG1_MASK,
+	}, {
+		.reg = PAD_FUNCTION_EN_3,
+		.mask = VIP_AND_CAM1_REG2_MASK,
+		.val = VIP_AND_CAM1_REG2_MASK,
+	},
+};
+
+static struct spear_modemux cam1_modemux[] = {
+	{
+		.muxregs = cam1_muxreg,
+		.nmuxregs = ARRAY_SIZE(cam1_muxreg),
+	},
+};
+
+static struct spear_pingroup cam1_pingroup = {
+	.name = "cam1_grp",
+	.pins = cam1_pins,
+	.npins = ARRAY_SIZE(cam1_pins),
+	.modemuxs = cam1_modemux,
+	.nmodemuxs = ARRAY_SIZE(cam1_modemux),
+};
+
+static const char *const cam1_grps[] = { "cam1_grp" };
+static struct spear_function cam1_function = {
+	.name = "cam1",
+	.groups = cam1_grps,
+	.ngroups = ARRAY_SIZE(cam1_grps),
+};
+
+/* pad multiplexing for cam2 device */
+static const unsigned cam2_pins[] = { 39, 44, 45, 46, 47, 48, 49, 50, 51, 52, 53
+};
+static struct spear_muxreg cam2_muxreg[] = {
+	{
+		.reg = PAD_SHARED_IP_EN_1,
+		.mask = CAM2_MASK,
+		.val = CAM2_MASK,
+	}, {
+		.reg = PAD_FUNCTION_EN_2,
+		.mask = VIP_AND_CAM2_REG1_MASK,
+		.val = VIP_AND_CAM2_REG1_MASK,
+	},
+};
+
+static struct spear_modemux cam2_modemux[] = {
+	{
+		.muxregs = cam2_muxreg,
+		.nmuxregs = ARRAY_SIZE(cam2_muxreg),
+	},
+};
+
+static struct spear_pingroup cam2_pingroup = {
+	.name = "cam2_grp",
+	.pins = cam2_pins,
+	.npins = ARRAY_SIZE(cam2_pins),
+	.modemuxs = cam2_modemux,
+	.nmodemuxs = ARRAY_SIZE(cam2_modemux),
+};
+
+static const char *const cam2_grps[] = { "cam2_grp" };
+static struct spear_function cam2_function = {
+	.name = "cam2",
+	.groups = cam2_grps,
+	.ngroups = ARRAY_SIZE(cam2_grps),
+};
+
+/* pad multiplexing for cam3 device */
+static const unsigned cam3_pins[] = { 20, 25, 26, 27, 28, 29, 30, 31, 32, 33, 34
+};
+static struct spear_muxreg cam3_muxreg[] = {
+	{
+		.reg = PAD_SHARED_IP_EN_1,
+		.mask = CAM3_MASK,
+		.val = CAM3_MASK,
+	}, {
+		.reg = PAD_FUNCTION_EN_1,
+		.mask = VIP_AND_CAM3_REG0_MASK,
+		.val = VIP_AND_CAM3_REG0_MASK,
+	}, {
+		.reg = PAD_FUNCTION_EN_2,
+		.mask = VIP_AND_CAM3_REG1_MASK,
+		.val = VIP_AND_CAM3_REG1_MASK,
+	},
+};
+
+static struct spear_modemux cam3_modemux[] = {
+	{
+		.muxregs = cam3_muxreg,
+		.nmuxregs = ARRAY_SIZE(cam3_muxreg),
+	},
+};
+
+static struct spear_pingroup cam3_pingroup = {
+	.name = "cam3_grp",
+	.pins = cam3_pins,
+	.npins = ARRAY_SIZE(cam3_pins),
+	.modemuxs = cam3_modemux,
+	.nmodemuxs = ARRAY_SIZE(cam3_modemux),
+};
+
+static const char *const cam3_grps[] = { "cam3_grp" };
+static struct spear_function cam3_function = {
+	.name = "cam3",
+	.groups = cam3_grps,
+	.ngroups = ARRAY_SIZE(cam3_grps),
+};
+
+/* pad multiplexing for smi device */
+static const unsigned smi_pins[] = { 76, 77, 78, 79, 84 };
+static struct spear_muxreg smi_muxreg[] = {
+	{
+		.reg = PAD_FUNCTION_EN_3,
+		.mask = SMI_REG2_MASK,
+		.val = SMI_REG2_MASK,
+	},
+};
+
+static struct spear_modemux smi_modemux[] = {
+	{
+		.muxregs = smi_muxreg,
+		.nmuxregs = ARRAY_SIZE(smi_muxreg),
+	},
+};
+
+static struct spear_pingroup smi_pingroup = {
+	.name = "smi_grp",
+	.pins = smi_pins,
+	.npins = ARRAY_SIZE(smi_pins),
+	.modemuxs = smi_modemux,
+	.nmodemuxs = ARRAY_SIZE(smi_modemux),
+};
+
+static const char *const smi_grps[] = { "smi_grp" };
+static struct spear_function smi_function = {
+	.name = "smi",
+	.groups = smi_grps,
+	.ngroups = ARRAY_SIZE(smi_grps),
+};
+
+/* pad multiplexing for ssp0 device */
+static const unsigned ssp0_pins[] = { 80, 81, 82, 83 };
+static struct spear_muxreg ssp0_muxreg[] = {
+	{
+		.reg = PAD_FUNCTION_EN_3,
+		.mask = SSP0_REG2_MASK,
+		.val = SSP0_REG2_MASK,
+	},
+};
+
+static struct spear_modemux ssp0_modemux[] = {
+	{
+		.muxregs = ssp0_muxreg,
+		.nmuxregs = ARRAY_SIZE(ssp0_muxreg),
+	},
+};
+
+static struct spear_pingroup ssp0_pingroup = {
+	.name = "ssp0_grp",
+	.pins = ssp0_pins,
+	.npins = ARRAY_SIZE(ssp0_pins),
+	.modemuxs = ssp0_modemux,
+	.nmodemuxs = ARRAY_SIZE(ssp0_modemux),
+};
+
+/* pad multiplexing for ssp0_cs1 device */
+static const unsigned ssp0_cs1_pins[] = { 24 };
+static struct spear_muxreg ssp0_cs1_muxreg[] = {
+	{
+		.reg = PAD_SHARED_IP_EN_1,
+		.mask = SSP0_CS1_MASK,
+		.val = SSP0_CS1_MASK,
+	}, {
+		.reg = PAD_FUNCTION_EN_1,
+		.mask = PWM0_AND_SSP0_CS1_REG0_MASK,
+		.val = PWM0_AND_SSP0_CS1_REG0_MASK,
+	},
+};
+
+static struct spear_modemux ssp0_cs1_modemux[] = {
+	{
+		.muxregs = ssp0_cs1_muxreg,
+		.nmuxregs = ARRAY_SIZE(ssp0_cs1_muxreg),
+	},
+};
+
+static struct spear_pingroup ssp0_cs1_pingroup = {
+	.name = "ssp0_cs1_grp",
+	.pins = ssp0_cs1_pins,
+	.npins = ARRAY_SIZE(ssp0_cs1_pins),
+	.modemuxs = ssp0_cs1_modemux,
+	.nmodemuxs = ARRAY_SIZE(ssp0_cs1_modemux),
+};
+
+/* pad multiplexing for ssp0_cs2 device */
+static const unsigned ssp0_cs2_pins[] = { 85 };
+static struct spear_muxreg ssp0_cs2_muxreg[] = {
+	{
+		.reg = PAD_SHARED_IP_EN_1,
+		.mask = SSP0_CS2_MASK,
+		.val = SSP0_CS2_MASK,
+	}, {
+		.reg = PAD_FUNCTION_EN_3,
+		.mask = TS_AND_SSP0_CS2_REG2_MASK,
+		.val = TS_AND_SSP0_CS2_REG2_MASK,
+	},
+};
+
+static struct spear_modemux ssp0_cs2_modemux[] = {
+	{
+		.muxregs = ssp0_cs2_muxreg,
+		.nmuxregs = ARRAY_SIZE(ssp0_cs2_muxreg),
+	},
+};
+
+static struct spear_pingroup ssp0_cs2_pingroup = {
+	.name = "ssp0_cs2_grp",
+	.pins = ssp0_cs2_pins,
+	.npins = ARRAY_SIZE(ssp0_cs2_pins),
+	.modemuxs = ssp0_cs2_modemux,
+	.nmodemuxs = ARRAY_SIZE(ssp0_cs2_modemux),
+};
+
+/* pad multiplexing for ssp0_cs3 device */
+static const unsigned ssp0_cs3_pins[] = { 132 };
+static struct spear_muxreg ssp0_cs3_muxreg[] = {
+	{
+		.reg = PAD_FUNCTION_EN_5,
+		.mask = SSP0_CS3_REG4_MASK,
+		.val = SSP0_CS3_REG4_MASK,
+	},
+};
+
+static struct spear_modemux ssp0_cs3_modemux[] = {
+	{
+		.muxregs = ssp0_cs3_muxreg,
+		.nmuxregs = ARRAY_SIZE(ssp0_cs3_muxreg),
+	},
+};
+
+static struct spear_pingroup ssp0_cs3_pingroup = {
+	.name = "ssp0_cs3_grp",
+	.pins = ssp0_cs3_pins,
+	.npins = ARRAY_SIZE(ssp0_cs3_pins),
+	.modemuxs = ssp0_cs3_modemux,
+	.nmodemuxs = ARRAY_SIZE(ssp0_cs3_modemux),
+};
+
+static const char *const ssp0_grps[] = { "ssp0_grp", "ssp0_cs1_grp",
+	"ssp0_cs2_grp", "ssp0_cs3_grp" };
+static struct spear_function ssp0_function = {
+	.name = "ssp0",
+	.groups = ssp0_grps,
+	.ngroups = ARRAY_SIZE(ssp0_grps),
+};
+
+/* pad multiplexing for uart0 device */
+static const unsigned uart0_pins[] = { 86, 87 };
+static struct spear_muxreg uart0_muxreg[] = {
+	{
+		.reg = PAD_FUNCTION_EN_3,
+		.mask = UART0_REG2_MASK,
+		.val = UART0_REG2_MASK,
+	},
+};
+
+static struct spear_modemux uart0_modemux[] = {
+	{
+		.muxregs = uart0_muxreg,
+		.nmuxregs = ARRAY_SIZE(uart0_muxreg),
+	},
+};
+
+static struct spear_pingroup uart0_pingroup = {
+	.name = "uart0_grp",
+	.pins = uart0_pins,
+	.npins = ARRAY_SIZE(uart0_pins),
+	.modemuxs = uart0_modemux,
+	.nmodemuxs = ARRAY_SIZE(uart0_modemux),
+};
+
+/* pad multiplexing for uart0_enh device */
+static const unsigned uart0_enh_pins[] = { 11, 12, 13, 14, 15, 16 };
+static struct spear_muxreg uart0_enh_muxreg[] = {
+	{
+		.reg = PAD_SHARED_IP_EN_1,
+		.mask = GPT_MASK,
+		.val = 0,
+	}, {
+		.reg = PAD_FUNCTION_EN_1,
+		.mask = UART0_ENH_AND_GPT_REG0_MASK,
+		.val = UART0_ENH_AND_GPT_REG0_MASK,
+	},
+};
+
+static struct spear_modemux uart0_enh_modemux[] = {
+	{
+		.muxregs = uart0_enh_muxreg,
+		.nmuxregs = ARRAY_SIZE(uart0_enh_muxreg),
+	},
+};
+
+static struct spear_pingroup uart0_enh_pingroup = {
+	.name = "uart0_enh_grp",
+	.pins = uart0_enh_pins,
+	.npins = ARRAY_SIZE(uart0_enh_pins),
+	.modemuxs = uart0_enh_modemux,
+	.nmodemuxs = ARRAY_SIZE(uart0_enh_modemux),
+};
+
+static const char *const uart0_grps[] = { "uart0_grp", "uart0_enh_grp" };
+static struct spear_function uart0_function = {
+	.name = "uart0",
+	.groups = uart0_grps,
+	.ngroups = ARRAY_SIZE(uart0_grps),
+};
+
+/* pad multiplexing for uart1 device */
+static const unsigned uart1_pins[] = { 88, 89 };
+static struct spear_muxreg uart1_muxreg[] = {
+	{
+		.reg = PAD_FUNCTION_EN_3,
+		.mask = UART1_REG2_MASK,
+		.val = UART1_REG2_MASK,
+	},
+};
+
+static struct spear_modemux uart1_modemux[] = {
+	{
+		.muxregs = uart1_muxreg,
+		.nmuxregs = ARRAY_SIZE(uart1_muxreg),
+	},
+};
+
+static struct spear_pingroup uart1_pingroup = {
+	.name = "uart1_grp",
+	.pins = uart1_pins,
+	.npins = ARRAY_SIZE(uart1_pins),
+	.modemuxs = uart1_modemux,
+	.nmodemuxs = ARRAY_SIZE(uart1_modemux),
+};
+
+static const char *const uart1_grps[] = { "uart1_grp" };
+static struct spear_function uart1_function = {
+	.name = "uart1",
+	.groups = uart1_grps,
+	.ngroups = ARRAY_SIZE(uart1_grps),
+};
+
+/* pad multiplexing for i2s_in device */
+static const unsigned i2s_in_pins[] = { 90, 91, 92, 93, 94, 99 };
+static struct spear_muxreg i2s_in_muxreg[] = {
+	{
+		.reg = PAD_FUNCTION_EN_3,
+		.mask = I2S_IN_REG2_MASK,
+		.val = I2S_IN_REG2_MASK,
+	}, {
+		.reg = PAD_FUNCTION_EN_4,
+		.mask = I2S_IN_REG3_MASK,
+		.val = I2S_IN_REG3_MASK,
+	},
+};
+
+static struct spear_modemux i2s_in_modemux[] = {
+	{
+		.muxregs = i2s_in_muxreg,
+		.nmuxregs = ARRAY_SIZE(i2s_in_muxreg),
+	},
+};
+
+static struct spear_pingroup i2s_in_pingroup = {
+	.name = "i2s_in_grp",
+	.pins = i2s_in_pins,
+	.npins = ARRAY_SIZE(i2s_in_pins),
+	.modemuxs = i2s_in_modemux,
+	.nmodemuxs = ARRAY_SIZE(i2s_in_modemux),
+};
+
+/* pad multiplexing for i2s_out device */
+static const unsigned i2s_out_pins[] = { 95, 96, 97, 98, 100, 101, 102, 103 };
+static struct spear_muxreg i2s_out_muxreg[] = {
+	{
+		.reg = PAD_FUNCTION_EN_4,
+		.mask = I2S_OUT_REG3_MASK,
+		.val = I2S_OUT_REG3_MASK,
+	},
+};
+
+static struct spear_modemux i2s_out_modemux[] = {
+	{
+		.muxregs = i2s_out_muxreg,
+		.nmuxregs = ARRAY_SIZE(i2s_out_muxreg),
+	},
+};
+
+static struct spear_pingroup i2s_out_pingroup = {
+	.name = "i2s_out_grp",
+	.pins = i2s_out_pins,
+	.npins = ARRAY_SIZE(i2s_out_pins),
+	.modemuxs = i2s_out_modemux,
+	.nmodemuxs = ARRAY_SIZE(i2s_out_modemux),
+};
+
+static const char *const i2s_grps[] = { "i2s_in_grp", "i2s_out_grp" };
+static struct spear_function i2s_function = {
+	.name = "i2s",
+	.groups = i2s_grps,
+	.ngroups = ARRAY_SIZE(i2s_grps),
+};
+
+/* pad multiplexing for gmac device */
+static const unsigned gmac_pins[] = { 104, 105, 106, 107, 108, 109, 110, 111,
+	112, 113, 114, 115, 116, 117, 118, 119, 120, 121, 122, 123, 124, 125,
+	126, 127, 128, 129, 130, 131 };
+#define GMAC_MUXREG				\
+	{					\
+		.reg = PAD_FUNCTION_EN_4,	\
+		.mask = GMAC_REG3_MASK,		\
+		.val = GMAC_REG3_MASK,		\
+	}, {					\
+		.reg = PAD_FUNCTION_EN_5,	\
+		.mask = GMAC_REG4_MASK,		\
+		.val = GMAC_REG4_MASK,		\
+	}
+
+/* pad multiplexing for gmii device */
+static struct spear_muxreg gmii_muxreg[] = {
+	GMAC_MUXREG,
+	{
+		.reg = GMAC_CLK_CFG,
+		.mask = GMAC_PHY_IF_SEL_MASK,
+		.val = GMAC_PHY_IF_GMII_VAL,
+	},
+};
+
+static struct spear_modemux gmii_modemux[] = {
+	{
+		.muxregs = gmii_muxreg,
+		.nmuxregs = ARRAY_SIZE(gmii_muxreg),
+	},
+};
+
+static struct spear_pingroup gmii_pingroup = {
+	.name = "gmii_grp",
+	.pins = gmac_pins,
+	.npins = ARRAY_SIZE(gmac_pins),
+	.modemuxs = gmii_modemux,
+	.nmodemuxs = ARRAY_SIZE(gmii_modemux),
+};
+
+/* pad multiplexing for rgmii device */
+static struct spear_muxreg rgmii_muxreg[] = {
+	GMAC_MUXREG,
+	{
+		.reg = GMAC_CLK_CFG,
+		.mask = GMAC_PHY_IF_SEL_MASK,
+		.val = GMAC_PHY_IF_RGMII_VAL,
+	},
+};
+
+static struct spear_modemux rgmii_modemux[] = {
+	{
+		.muxregs = rgmii_muxreg,
+		.nmuxregs = ARRAY_SIZE(rgmii_muxreg),
+	},
+};
+
+static struct spear_pingroup rgmii_pingroup = {
+	.name = "rgmii_grp",
+	.pins = gmac_pins,
+	.npins = ARRAY_SIZE(gmac_pins),
+	.modemuxs = rgmii_modemux,
+	.nmodemuxs = ARRAY_SIZE(rgmii_modemux),
+};
+
+/* pad multiplexing for rmii device */
+static struct spear_muxreg rmii_muxreg[] = {
+	GMAC_MUXREG,
+	{
+		.reg = GMAC_CLK_CFG,
+		.mask = GMAC_PHY_IF_SEL_MASK,
+		.val = GMAC_PHY_IF_RMII_VAL,
+	},
+};
+
+static struct spear_modemux rmii_modemux[] = {
+	{
+		.muxregs = rmii_muxreg,
+		.nmuxregs = ARRAY_SIZE(rmii_muxreg),
+	},
+};
+
+static struct spear_pingroup rmii_pingroup = {
+	.name = "rmii_grp",
+	.pins = gmac_pins,
+	.npins = ARRAY_SIZE(gmac_pins),
+	.modemuxs = rmii_modemux,
+	.nmodemuxs = ARRAY_SIZE(rmii_modemux),
+};
+
+/* pad multiplexing for sgmii device */
+static struct spear_muxreg sgmii_muxreg[] = {
+	GMAC_MUXREG,
+	{
+		.reg = GMAC_CLK_CFG,
+		.mask = GMAC_PHY_IF_SEL_MASK,
+		.val = GMAC_PHY_IF_SGMII_VAL,
+	},
+};
+
+static struct spear_modemux sgmii_modemux[] = {
+	{
+		.muxregs = sgmii_muxreg,
+		.nmuxregs = ARRAY_SIZE(sgmii_muxreg),
+	},
+};
+
+static struct spear_pingroup sgmii_pingroup = {
+	.name = "sgmii_grp",
+	.pins = gmac_pins,
+	.npins = ARRAY_SIZE(gmac_pins),
+	.modemuxs = sgmii_modemux,
+	.nmodemuxs = ARRAY_SIZE(sgmii_modemux),
+};
+
+static const char *const gmac_grps[] = { "gmii_grp", "rgmii_grp", "rmii_grp",
+	"sgmii_grp" };
+static struct spear_function gmac_function = {
+	.name = "gmac",
+	.groups = gmac_grps,
+	.ngroups = ARRAY_SIZE(gmac_grps),
+};
+
+/* pad multiplexing for i2c0 device */
+static const unsigned i2c0_pins[] = { 133, 134 };
+static struct spear_muxreg i2c0_muxreg[] = {
+	{
+		.reg = PAD_FUNCTION_EN_5,
+		.mask = I2C0_REG4_MASK,
+		.val = I2C0_REG4_MASK,
+	},
+};
+
+static struct spear_modemux i2c0_modemux[] = {
+	{
+		.muxregs = i2c0_muxreg,
+		.nmuxregs = ARRAY_SIZE(i2c0_muxreg),
+	},
+};
+
+static struct spear_pingroup i2c0_pingroup = {
+	.name = "i2c0_grp",
+	.pins = i2c0_pins,
+	.npins = ARRAY_SIZE(i2c0_pins),
+	.modemuxs = i2c0_modemux,
+	.nmodemuxs = ARRAY_SIZE(i2c0_modemux),
+};
+
+static const char *const i2c0_grps[] = { "i2c0_grp" };
+static struct spear_function i2c0_function = {
+	.name = "i2c0",
+	.groups = i2c0_grps,
+	.ngroups = ARRAY_SIZE(i2c0_grps),
+};
+
+/* pad multiplexing for i2c1 device */
+static const unsigned i2c1_pins[] = { 18, 23 };
+static struct spear_muxreg i2c1_muxreg[] = {
+	{
+		.reg = PAD_FUNCTION_EN_1,
+		.mask = I2C1_REG0_MASK,
+		.val = I2C1_REG0_MASK,
+	},
+};
+
+static struct spear_modemux i2c1_modemux[] = {
+	{
+		.muxregs = i2c1_muxreg,
+		.nmuxregs = ARRAY_SIZE(i2c1_muxreg),
+	},
+};
+
+static struct spear_pingroup i2c1_pingroup = {
+	.name = "i2c1_grp",
+	.pins = i2c1_pins,
+	.npins = ARRAY_SIZE(i2c1_pins),
+	.modemuxs = i2c1_modemux,
+	.nmodemuxs = ARRAY_SIZE(i2c1_modemux),
+};
+
+static const char *const i2c1_grps[] = { "i2c1_grp" };
+static struct spear_function i2c1_function = {
+	.name = "i2c1",
+	.groups = i2c1_grps,
+	.ngroups = ARRAY_SIZE(i2c1_grps),
+};
+
+/* pad multiplexing for cec0 device */
+static const unsigned cec0_pins[] = { 135 };
+static struct spear_muxreg cec0_muxreg[] = {
+	{
+		.reg = PAD_FUNCTION_EN_5,
+		.mask = CEC0_REG4_MASK,
+		.val = CEC0_REG4_MASK,
+	},
+};
+
+static struct spear_modemux cec0_modemux[] = {
+	{
+		.muxregs = cec0_muxreg,
+		.nmuxregs = ARRAY_SIZE(cec0_muxreg),
+	},
+};
+
+static struct spear_pingroup cec0_pingroup = {
+	.name = "cec0_grp",
+	.pins = cec0_pins,
+	.npins = ARRAY_SIZE(cec0_pins),
+	.modemuxs = cec0_modemux,
+	.nmodemuxs = ARRAY_SIZE(cec0_modemux),
+};
+
+static const char *const cec0_grps[] = { "cec0_grp" };
+static struct spear_function cec0_function = {
+	.name = "cec0",
+	.groups = cec0_grps,
+	.ngroups = ARRAY_SIZE(cec0_grps),
+};
+
+/* pad multiplexing for cec1 device */
+static const unsigned cec1_pins[] = { 136 };
+static struct spear_muxreg cec1_muxreg[] = {
+	{
+		.reg = PAD_FUNCTION_EN_5,
+		.mask = CEC1_REG4_MASK,
+		.val = CEC1_REG4_MASK,
+	},
+};
+
+static struct spear_modemux cec1_modemux[] = {
+	{
+		.muxregs = cec1_muxreg,
+		.nmuxregs = ARRAY_SIZE(cec1_muxreg),
+	},
+};
+
+static struct spear_pingroup cec1_pingroup = {
+	.name = "cec1_grp",
+	.pins = cec1_pins,
+	.npins = ARRAY_SIZE(cec1_pins),
+	.modemuxs = cec1_modemux,
+	.nmodemuxs = ARRAY_SIZE(cec1_modemux),
+};
+
+static const char *const cec1_grps[] = { "cec1_grp" };
+static struct spear_function cec1_function = {
+	.name = "cec1",
+	.groups = cec1_grps,
+	.ngroups = ARRAY_SIZE(cec1_grps),
+};
+
+/* pad multiplexing for mcif devices */
+static const unsigned mcif_pins[] = { 193, 194, 195, 196, 197, 198, 199, 200,
+	201, 202, 203, 204, 205, 206, 207, 208, 209, 210, 211, 212, 213, 214,
+	215, 216, 217, 218, 219, 220, 221, 222, 223, 224, 225, 226, 227, 228,
+	229, 230, 231, 232, 237 };
+#define MCIF_MUXREG							\
+	{								\
+		.reg = PAD_SHARED_IP_EN_1,				\
+		.mask = MCIF_MASK,					\
+		.val = MCIF_MASK,					\
+	}, {								\
+		.reg = PAD_FUNCTION_EN_7,				\
+		.mask = FSMC_PNOR_AND_MCIF_REG6_MASK | MCIF_REG6_MASK,	\
+		.val = FSMC_PNOR_AND_MCIF_REG6_MASK | MCIF_REG6_MASK,	\
+	}, {								\
+		.reg = PAD_FUNCTION_EN_8,				\
+		.mask = MCIF_REG7_MASK,					\
+		.val = MCIF_REG7_MASK,					\
+	}
+
+/* Pad multiplexing for sdhci device */
+static struct spear_muxreg sdhci_muxreg[] = {
+	MCIF_MUXREG,
+	{
+		.reg = PERIP_CFG,
+		.mask = MCIF_SEL_MASK,
+		.val = MCIF_SEL_SD,
+	},
+};
+
+static struct spear_modemux sdhci_modemux[] = {
+	{
+		.muxregs = sdhci_muxreg,
+		.nmuxregs = ARRAY_SIZE(sdhci_muxreg),
+	},
+};
+
+static struct spear_pingroup sdhci_pingroup = {
+	.name = "sdhci_grp",
+	.pins = mcif_pins,
+	.npins = ARRAY_SIZE(mcif_pins),
+	.modemuxs = sdhci_modemux,
+	.nmodemuxs = ARRAY_SIZE(sdhci_modemux),
+};
+
+static const char *const sdhci_grps[] = { "sdhci_grp" };
+static struct spear_function sdhci_function = {
+	.name = "sdhci",
+	.groups = sdhci_grps,
+	.ngroups = ARRAY_SIZE(sdhci_grps),
+};
+
+/* Pad multiplexing for cf device */
+static struct spear_muxreg cf_muxreg[] = {
+	MCIF_MUXREG,
+	{
+		.reg = PERIP_CFG,
+		.mask = MCIF_SEL_MASK,
+		.val = MCIF_SEL_CF,
+	},
+};
+
+static struct spear_modemux cf_modemux[] = {
+	{
+		.muxregs = cf_muxreg,
+		.nmuxregs = ARRAY_SIZE(cf_muxreg),
+	},
+};
+
+static struct spear_pingroup cf_pingroup = {
+	.name = "cf_grp",
+	.pins = mcif_pins,
+	.npins = ARRAY_SIZE(mcif_pins),
+	.modemuxs = cf_modemux,
+	.nmodemuxs = ARRAY_SIZE(cf_modemux),
+};
+
+static const char *const cf_grps[] = { "cf_grp" };
+static struct spear_function cf_function = {
+	.name = "cf",
+	.groups = cf_grps,
+	.ngroups = ARRAY_SIZE(cf_grps),
+};
+
+/* Pad multiplexing for xd device */
+static struct spear_muxreg xd_muxreg[] = {
+	MCIF_MUXREG,
+	{
+		.reg = PERIP_CFG,
+		.mask = MCIF_SEL_MASK,
+		.val = MCIF_SEL_XD,
+	},
+};
+
+static struct spear_modemux xd_modemux[] = {
+	{
+		.muxregs = xd_muxreg,
+		.nmuxregs = ARRAY_SIZE(xd_muxreg),
+	},
+};
+
+static struct spear_pingroup xd_pingroup = {
+	.name = "xd_grp",
+	.pins = mcif_pins,
+	.npins = ARRAY_SIZE(mcif_pins),
+	.modemuxs = xd_modemux,
+	.nmodemuxs = ARRAY_SIZE(xd_modemux),
+};
+
+static const char *const xd_grps[] = { "xd_grp" };
+static struct spear_function xd_function = {
+	.name = "xd",
+	.groups = xd_grps,
+	.ngroups = ARRAY_SIZE(xd_grps),
+};
+
+/* pad multiplexing for clcd device */
+static const unsigned clcd_pins[] = { 138, 139, 140, 141, 142, 143, 144, 145,
+	146, 147, 148, 149, 150, 151, 152, 153, 154, 155, 156, 157, 158, 159,
+	160, 161, 162, 163, 164, 165, 166, 167, 168, 169, 170, 171, 172, 173,
+	174, 175, 176, 177, 178, 179, 180, 181, 182, 183, 184, 185, 186, 187,
+	188, 189, 190, 191 };
+static struct spear_muxreg clcd_muxreg[] = {
+	{
+		.reg = PAD_SHARED_IP_EN_1,
+		.mask = ARM_TRACE_MASK | MIPHY_DBG_MASK,
+		.val = 0,
+	}, {
+		.reg = PAD_FUNCTION_EN_5,
+		.mask = CLCD_REG4_MASK | CLCD_AND_ARM_TRACE_REG4_MASK,
+		.val = CLCD_REG4_MASK | CLCD_AND_ARM_TRACE_REG4_MASK,
+	}, {
+		.reg = PAD_FUNCTION_EN_6,
+		.mask = CLCD_AND_ARM_TRACE_REG5_MASK,
+		.val = CLCD_AND_ARM_TRACE_REG5_MASK,
+	}, {
+		.reg = PAD_FUNCTION_EN_7,
+		.mask = CLCD_AND_ARM_TRACE_REG6_MASK,
+		.val = CLCD_AND_ARM_TRACE_REG6_MASK,
+	},
+};
+
+static struct spear_modemux clcd_modemux[] = {
+	{
+		.muxregs = clcd_muxreg,
+		.nmuxregs = ARRAY_SIZE(clcd_muxreg),
+	},
+};
+
+static struct spear_pingroup clcd_pingroup = {
+	.name = "clcd_grp",
+	.pins = clcd_pins,
+	.npins = ARRAY_SIZE(clcd_pins),
+	.modemuxs = clcd_modemux,
+	.nmodemuxs = ARRAY_SIZE(clcd_modemux),
+};
+
+static const char *const clcd_grps[] = { "clcd_grp" };
+static struct spear_function clcd_function = {
+	.name = "clcd",
+	.groups = clcd_grps,
+	.ngroups = ARRAY_SIZE(clcd_grps),
+};
+
+/* pad multiplexing for arm_trace device */
+static const unsigned arm_trace_pins[] = { 158, 159, 160, 161, 162, 163, 164,
+	165, 166, 167, 168, 169, 170, 171, 172, 173, 174, 175, 176, 177, 178,
+	179, 180, 181, 182, 183, 184, 185, 186, 187, 188, 189, 190, 191, 192,
+	193, 194, 195, 196, 197, 198, 199, 200 };
+static struct spear_muxreg arm_trace_muxreg[] = {
+	{
+		.reg = PAD_SHARED_IP_EN_1,
+		.mask = ARM_TRACE_MASK,
+		.val = ARM_TRACE_MASK,
+	}, {
+		.reg = PAD_FUNCTION_EN_5,
+		.mask = CLCD_AND_ARM_TRACE_REG4_MASK,
+		.val = CLCD_AND_ARM_TRACE_REG4_MASK,
+	}, {
+		.reg = PAD_FUNCTION_EN_6,
+		.mask = CLCD_AND_ARM_TRACE_REG5_MASK,
+		.val = CLCD_AND_ARM_TRACE_REG5_MASK,
+	}, {
+		.reg = PAD_FUNCTION_EN_7,
+		.mask = CLCD_AND_ARM_TRACE_REG6_MASK,
+		.val = CLCD_AND_ARM_TRACE_REG6_MASK,
+	},
+};
+
+static struct spear_modemux arm_trace_modemux[] = {
+	{
+		.muxregs = arm_trace_muxreg,
+		.nmuxregs = ARRAY_SIZE(arm_trace_muxreg),
+	},
+};
+
+static struct spear_pingroup arm_trace_pingroup = {
+	.name = "arm_trace_grp",
+	.pins = arm_trace_pins,
+	.npins = ARRAY_SIZE(arm_trace_pins),
+	.modemuxs = arm_trace_modemux,
+	.nmodemuxs = ARRAY_SIZE(arm_trace_modemux),
+};
+
+static const char *const arm_trace_grps[] = { "arm_trace_grp" };
+static struct spear_function arm_trace_function = {
+	.name = "arm_trace",
+	.groups = arm_trace_grps,
+	.ngroups = ARRAY_SIZE(arm_trace_grps),
+};
+
+/* pad multiplexing for miphy_dbg device */
+static const unsigned miphy_dbg_pins[] = { 96, 97, 98, 99, 100, 101, 102, 103,
+	132, 135, 136, 137, 138, 139, 140, 141, 142, 143, 144, 145, 146, 147,
+	148, 149, 150, 151, 152, 153, 154, 155, 156, 157 };
+static struct spear_muxreg miphy_dbg_muxreg[] = {
+	{
+		.reg = PAD_SHARED_IP_EN_1,
+		.mask = MIPHY_DBG_MASK,
+		.val = MIPHY_DBG_MASK,
+	}, {
+		.reg = PAD_FUNCTION_EN_5,
+		.mask = DEVS_GRP_AND_MIPHY_DBG_REG4_MASK,
+		.val = DEVS_GRP_AND_MIPHY_DBG_REG4_MASK,
+	},
+};
+
+static struct spear_modemux miphy_dbg_modemux[] = {
+	{
+		.muxregs = miphy_dbg_muxreg,
+		.nmuxregs = ARRAY_SIZE(miphy_dbg_muxreg),
+	},
+};
+
+static struct spear_pingroup miphy_dbg_pingroup = {
+	.name = "miphy_dbg_grp",
+	.pins = miphy_dbg_pins,
+	.npins = ARRAY_SIZE(miphy_dbg_pins),
+	.modemuxs = miphy_dbg_modemux,
+	.nmodemuxs = ARRAY_SIZE(miphy_dbg_modemux),
+};
+
+static const char *const miphy_dbg_grps[] = { "miphy_dbg_grp" };
+static struct spear_function miphy_dbg_function = {
+	.name = "miphy_dbg",
+	.groups = miphy_dbg_grps,
+	.ngroups = ARRAY_SIZE(miphy_dbg_grps),
+};
+
+/* pad multiplexing for pcie device */
+static const unsigned pcie_pins[] = { 250 };
+static struct spear_muxreg pcie_muxreg[] = {
+	{
+		.reg = PCIE_SATA_CFG,
+		.mask = SATA_PCIE_CFG_MASK,
+		.val = PCIE_CFG_VAL,
+	},
+};
+
+static struct spear_modemux pcie_modemux[] = {
+	{
+		.muxregs = pcie_muxreg,
+		.nmuxregs = ARRAY_SIZE(pcie_muxreg),
+	},
+};
+
+static struct spear_pingroup pcie_pingroup = {
+	.name = "pcie_grp",
+	.pins = pcie_pins,
+	.npins = ARRAY_SIZE(pcie_pins),
+	.modemuxs = pcie_modemux,
+	.nmodemuxs = ARRAY_SIZE(pcie_modemux),
+};
+
+static const char *const pcie_grps[] = { "pcie_grp" };
+static struct spear_function pcie_function = {
+	.name = "pcie",
+	.groups = pcie_grps,
+	.ngroups = ARRAY_SIZE(pcie_grps),
+};
+
+/* pad multiplexing for sata device */
+static const unsigned sata_pins[] = { 250 };
+static struct spear_muxreg sata_muxreg[] = {
+	{
+		.reg = PCIE_SATA_CFG,
+		.mask = SATA_PCIE_CFG_MASK,
+		.val = SATA_CFG_VAL,
+	},
+};
+
+static struct spear_modemux sata_modemux[] = {
+	{
+		.muxregs = sata_muxreg,
+		.nmuxregs = ARRAY_SIZE(sata_muxreg),
+	},
+};
+
+static struct spear_pingroup sata_pingroup = {
+	.name = "sata_grp",
+	.pins = sata_pins,
+	.npins = ARRAY_SIZE(sata_pins),
+	.modemuxs = sata_modemux,
+	.nmodemuxs = ARRAY_SIZE(sata_modemux),
+};
+
+static const char *const sata_grps[] = { "sata_grp" };
+static struct spear_function sata_function = {
+	.name = "sata",
+	.groups = sata_grps,
+	.ngroups = ARRAY_SIZE(sata_grps),
+};
+
+/* pingroups */
+static struct spear_pingroup *spear1340_pingroups[] = {
+	&pads_as_gpio_pingroup,
+	&fsmc_8bit_pingroup,
+	&fsmc_16bit_pingroup,
+	&fsmc_pnor_pingroup,
+	&keyboard_row_col_pingroup,
+	&keyboard_col5_pingroup,
+	&spdif_in_pingroup,
+	&spdif_out_pingroup,
+	&gpt_0_1_pingroup,
+	&pwm0_pingroup,
+	&pwm1_pingroup,
+	&pwm2_pingroup,
+	&pwm3_pingroup,
+	&vip_mux_pingroup,
+	&vip_mux_cam0_pingroup,
+	&vip_mux_cam1_pingroup,
+	&vip_mux_cam2_pingroup,
+	&vip_mux_cam3_pingroup,
+	&cam0_pingroup,
+	&cam1_pingroup,
+	&cam2_pingroup,
+	&cam3_pingroup,
+	&smi_pingroup,
+	&ssp0_pingroup,
+	&ssp0_cs1_pingroup,
+	&ssp0_cs2_pingroup,
+	&ssp0_cs3_pingroup,
+	&uart0_pingroup,
+	&uart0_enh_pingroup,
+	&uart1_pingroup,
+	&i2s_in_pingroup,
+	&i2s_out_pingroup,
+	&gmii_pingroup,
+	&rgmii_pingroup,
+	&rmii_pingroup,
+	&sgmii_pingroup,
+	&i2c0_pingroup,
+	&i2c1_pingroup,
+	&cec0_pingroup,
+	&cec1_pingroup,
+	&sdhci_pingroup,
+	&cf_pingroup,
+	&xd_pingroup,
+	&clcd_pingroup,
+	&arm_trace_pingroup,
+	&miphy_dbg_pingroup,
+	&pcie_pingroup,
+	&sata_pingroup,
+};
+
+/* functions */
+static struct spear_function *spear1340_functions[] = {
+	&pads_as_gpio_function,
+	&fsmc_function,
+	&keyboard_function,
+	&spdif_in_function,
+	&spdif_out_function,
+	&gpt_0_1_function,
+	&pwm_function,
+	&vip_function,
+	&cam0_function,
+	&cam1_function,
+	&cam2_function,
+	&cam3_function,
+	&smi_function,
+	&ssp0_function,
+	&uart0_function,
+	&uart1_function,
+	&i2s_function,
+	&gmac_function,
+	&i2c0_function,
+	&i2c1_function,
+	&cec0_function,
+	&cec1_function,
+	&sdhci_function,
+	&cf_function,
+	&xd_function,
+	&clcd_function,
+	&arm_trace_function,
+	&miphy_dbg_function,
+	&pcie_function,
+	&sata_function,
+};
+
+static struct spear_pinctrl_machdata spear1340_machdata = {
+	.pins = spear1340_pins,
+	.npins = ARRAY_SIZE(spear1340_pins),
+	.groups = spear1340_pingroups,
+	.ngroups = ARRAY_SIZE(spear1340_pingroups),
+	.functions = spear1340_functions,
+	.nfunctions = ARRAY_SIZE(spear1340_functions),
+	.modes_supported = false,
+};
+
+static struct of_device_id spear1340_pinctrl_of_match[] __devinitdata = {
+	{
+		.compatible = "st,spear1340-pinmux",
+	},
+	{},
+};
+
+static int __devinit spear1340_pinctrl_probe(struct platform_device *pdev)
+{
+	return spear_pinctrl_probe(pdev, &spear1340_machdata);
+}
+
+static int __devexit spear1340_pinctrl_remove(struct platform_device *pdev)
+{
+	return spear_pinctrl_remove(pdev);
+}
+
+static struct platform_driver spear1340_pinctrl_driver = {
+	.driver = {
+		.name = DRIVER_NAME,
+		.owner = THIS_MODULE,
+		.of_match_table = spear1340_pinctrl_of_match,
+	},
+	.probe = spear1340_pinctrl_probe,
+	.remove = __devexit_p(spear1340_pinctrl_remove),
+};
+
+static int __init spear1340_pinctrl_init(void)
+{
+	return platform_driver_register(&spear1340_pinctrl_driver);
+}
+arch_initcall(spear1340_pinctrl_init);
+
+static void __exit spear1340_pinctrl_exit(void)
+{
+	platform_driver_unregister(&spear1340_pinctrl_driver);
+}
+module_exit(spear1340_pinctrl_exit);
+
+MODULE_AUTHOR("Viresh Kumar <viresh.kumar@st.com>");
+MODULE_DESCRIPTION("ST Microelectronics SPEAr1340 pinctrl driver");
+MODULE_LICENSE("GPL v2");
+MODULE_DEVICE_TABLE(of, spear1340_pinctrl_of_match);

drivers/pinctrl/spear/pinctrl-spear3xx.c

@@ -15,108 +15,7 @@
 
 /* pins */
 static const struct pinctrl_pin_desc spear3xx_pins[] = {
-	PINCTRL_PIN(0, "PLGPIO0"),
-	PINCTRL_PIN(1, "PLGPIO1"),
-	PINCTRL_PIN(2, "PLGPIO2"),
-	PINCTRL_PIN(3, "PLGPIO3"),
-	PINCTRL_PIN(4, "PLGPIO4"),
-	PINCTRL_PIN(5, "PLGPIO5"),
-	PINCTRL_PIN(6, "PLGPIO6"),
-	PINCTRL_PIN(7, "PLGPIO7"),
-	PINCTRL_PIN(8, "PLGPIO8"),
-	PINCTRL_PIN(9, "PLGPIO9"),
-	PINCTRL_PIN(10, "PLGPIO10"),
-	PINCTRL_PIN(11, "PLGPIO11"),
-	PINCTRL_PIN(12, "PLGPIO12"),
-	PINCTRL_PIN(13, "PLGPIO13"),
-	PINCTRL_PIN(14, "PLGPIO14"),
-	PINCTRL_PIN(15, "PLGPIO15"),
-	PINCTRL_PIN(16, "PLGPIO16"),
-	PINCTRL_PIN(17, "PLGPIO17"),
-	PINCTRL_PIN(18, "PLGPIO18"),
-	PINCTRL_PIN(19, "PLGPIO19"),
-	PINCTRL_PIN(20, "PLGPIO20"),
-	PINCTRL_PIN(21, "PLGPIO21"),
-	PINCTRL_PIN(22, "PLGPIO22"),
-	PINCTRL_PIN(23, "PLGPIO23"),
-	PINCTRL_PIN(24, "PLGPIO24"),
-	PINCTRL_PIN(25, "PLGPIO25"),
-	PINCTRL_PIN(26, "PLGPIO26"),
-	PINCTRL_PIN(27, "PLGPIO27"),
-	PINCTRL_PIN(28, "PLGPIO28"),
-	PINCTRL_PIN(29, "PLGPIO29"),
-	PINCTRL_PIN(30, "PLGPIO30"),
-	PINCTRL_PIN(31, "PLGPIO31"),
-	PINCTRL_PIN(32, "PLGPIO32"),
-	PINCTRL_PIN(33, "PLGPIO33"),
-	PINCTRL_PIN(34, "PLGPIO34"),
-	PINCTRL_PIN(35, "PLGPIO35"),
-	PINCTRL_PIN(36, "PLGPIO36"),
-	PINCTRL_PIN(37, "PLGPIO37"),
-	PINCTRL_PIN(38, "PLGPIO38"),
-	PINCTRL_PIN(39, "PLGPIO39"),
-	PINCTRL_PIN(40, "PLGPIO40"),
-	PINCTRL_PIN(41, "PLGPIO41"),
-	PINCTRL_PIN(42, "PLGPIO42"),
-	PINCTRL_PIN(43, "PLGPIO43"),
-	PINCTRL_PIN(44, "PLGPIO44"),
-	PINCTRL_PIN(45, "PLGPIO45"),
-	PINCTRL_PIN(46, "PLGPIO46"),
-	PINCTRL_PIN(47, "PLGPIO47"),
-	PINCTRL_PIN(48, "PLGPIO48"),
-	PINCTRL_PIN(49, "PLGPIO49"),
-	PINCTRL_PIN(50, "PLGPIO50"),
-	PINCTRL_PIN(51, "PLGPIO51"),
-	PINCTRL_PIN(52, "PLGPIO52"),
-	PINCTRL_PIN(53, "PLGPIO53"),
-	PINCTRL_PIN(54, "PLGPIO54"),
-	PINCTRL_PIN(55, "PLGPIO55"),
-	PINCTRL_PIN(56, "PLGPIO56"),
-	PINCTRL_PIN(57, "PLGPIO57"),
-	PINCTRL_PIN(58, "PLGPIO58"),
-	PINCTRL_PIN(59, "PLGPIO59"),
-	PINCTRL_PIN(60, "PLGPIO60"),
-	PINCTRL_PIN(61, "PLGPIO61"),
-	PINCTRL_PIN(62, "PLGPIO62"),
-	PINCTRL_PIN(63, "PLGPIO63"),
-	PINCTRL_PIN(64, "PLGPIO64"),
-	PINCTRL_PIN(65, "PLGPIO65"),
-	PINCTRL_PIN(66, "PLGPIO66"),
-	PINCTRL_PIN(67, "PLGPIO67"),
-	PINCTRL_PIN(68, "PLGPIO68"),
-	PINCTRL_PIN(69, "PLGPIO69"),
-	PINCTRL_PIN(70, "PLGPIO70"),
-	PINCTRL_PIN(71, "PLGPIO71"),
-	PINCTRL_PIN(72, "PLGPIO72"),
-	PINCTRL_PIN(73, "PLGPIO73"),
-	PINCTRL_PIN(74, "PLGPIO74"),
-	PINCTRL_PIN(75, "PLGPIO75"),
-	PINCTRL_PIN(76, "PLGPIO76"),
-	PINCTRL_PIN(77, "PLGPIO77"),
-	PINCTRL_PIN(78, "PLGPIO78"),
-	PINCTRL_PIN(79, "PLGPIO79"),
-	PINCTRL_PIN(80, "PLGPIO80"),
-	PINCTRL_PIN(81, "PLGPIO81"),
-	PINCTRL_PIN(82, "PLGPIO82"),
-	PINCTRL_PIN(83, "PLGPIO83"),
-	PINCTRL_PIN(84, "PLGPIO84"),
-	PINCTRL_PIN(85, "PLGPIO85"),
-	PINCTRL_PIN(86, "PLGPIO86"),
-	PINCTRL_PIN(87, "PLGPIO87"),
-	PINCTRL_PIN(88, "PLGPIO88"),
-	PINCTRL_PIN(89, "PLGPIO89"),
-	PINCTRL_PIN(90, "PLGPIO90"),
-	PINCTRL_PIN(91, "PLGPIO91"),
-	PINCTRL_PIN(92, "PLGPIO92"),
-	PINCTRL_PIN(93, "PLGPIO93"),
-	PINCTRL_PIN(94, "PLGPIO94"),
-	PINCTRL_PIN(95, "PLGPIO95"),
-	PINCTRL_PIN(96, "PLGPIO96"),
-	PINCTRL_PIN(97, "PLGPIO97"),
-	PINCTRL_PIN(98, "PLGPIO98"),
-	PINCTRL_PIN(99, "PLGPIO99"),
-	PINCTRL_PIN(100, "PLGPIO100"),
-	PINCTRL_PIN(101, "PLGPIO101"),
+	SPEAR_PIN_0_TO_101,
 };
 
 /* firda_pins */

drivers/spi/Kconfig

@@ -311,7 +311,7 @@ config SPI_S3C24XX_FIQ
 
 config SPI_S3C64XX
 	tristate "Samsung S3C64XX series type SPI"
-	depends on (ARCH_S3C64XX || ARCH_S5P64X0 || ARCH_EXYNOS)
+	depends on (ARCH_S3C24XX || ARCH_S3C64XX || ARCH_S5P64X0 || ARCH_EXYNOS)
 	select S3C64XX_DMA if ARCH_S3C64XX
 	help
 	  SPI driver for Samsung S3C64XX and newer SoCs.