Commit 30c24dd8 authored by Edward Cree's avatar Edward Cree Committed by David S. Miller

sfc: siena: use padding to fix alignment in loopback test

Add two bytes of padding to the start of struct efx_loopback_payload,
 which are not sent on the wire.  This ensures the 'ip' member is
 4-byte aligned, preventing the following W=1 warning:
net/ethernet/sfc/siena/selftest.c:46:15: error: field ip within 'struct efx_loopback_payload' is less aligned than 'struct iphdr' and is usually due to 'struct efx_loopback_payload' being packed, which can lead to unaligned accesses [-Werror,-Wunaligned-access]
        struct iphdr ip;
Reported-by: default avatarArnd Bergmann <arnd@arndb.de>
Signed-off-by: default avatarEdward Cree <ecree.xilinx@gmail.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent cf60ed46
......@@ -42,12 +42,16 @@
* Falcon only performs RSS on TCP/UDP packets.
*/
struct efx_loopback_payload {
char pad[2]; /* Ensures ip is 4-byte aligned */
struct ethhdr header;
struct iphdr ip;
struct udphdr udp;
__be16 iteration;
char msg[64];
} __packed;
} __packed __aligned(4);
#define EFX_LOOPBACK_PAYLOAD_LEN (sizeof(struct efx_loopback_payload) - \
offsetof(struct efx_loopback_payload, \
header))
/* Loopback test source MAC address */
static const u8 payload_source[ETH_ALEN] __aligned(2) = {
......@@ -282,7 +286,7 @@ void efx_siena_loopback_rx_packet(struct efx_nic *efx,
const char *buf_ptr, int pkt_len)
{
struct efx_loopback_state *state = efx->loopback_selftest;
struct efx_loopback_payload *received;
struct efx_loopback_payload received;
struct efx_loopback_payload *payload;
BUG_ON(!buf_ptr);
......@@ -293,13 +297,14 @@ void efx_siena_loopback_rx_packet(struct efx_nic *efx,
payload = &state->payload;
received = (struct efx_loopback_payload *) buf_ptr;
received->ip.saddr = payload->ip.saddr;
memcpy(&received.header, buf_ptr,
min_t(int, pkt_len, EFX_LOOPBACK_PAYLOAD_LEN));
received.ip.saddr = payload->ip.saddr;
if (state->offload_csum)
received->ip.check = payload->ip.check;
received.ip.check = payload->ip.check;
/* Check that header exists */
if (pkt_len < sizeof(received->header)) {
if (pkt_len < sizeof(received.header)) {
netif_err(efx, drv, efx->net_dev,
"saw runt RX packet (length %d) in %s loopback "
"test\n", pkt_len, LOOPBACK_MODE(efx));
......@@ -307,7 +312,7 @@ void efx_siena_loopback_rx_packet(struct efx_nic *efx,
}
/* Check that the ethernet header exists */
if (memcmp(&received->header, &payload->header, ETH_HLEN) != 0) {
if (memcmp(&received.header, &payload->header, ETH_HLEN) != 0) {
netif_err(efx, drv, efx->net_dev,
"saw non-loopback RX packet in %s loopback test\n",
LOOPBACK_MODE(efx));
......@@ -315,16 +320,16 @@ void efx_siena_loopback_rx_packet(struct efx_nic *efx,
}
/* Check packet length */
if (pkt_len != sizeof(*payload)) {
if (pkt_len != EFX_LOOPBACK_PAYLOAD_LEN) {
netif_err(efx, drv, efx->net_dev,
"saw incorrect RX packet length %d (wanted %d) in "
"%s loopback test\n", pkt_len, (int)sizeof(*payload),
LOOPBACK_MODE(efx));
"%s loopback test\n", pkt_len,
(int)EFX_LOOPBACK_PAYLOAD_LEN, LOOPBACK_MODE(efx));
goto err;
}
/* Check that IP header matches */
if (memcmp(&received->ip, &payload->ip, sizeof(payload->ip)) != 0) {
if (memcmp(&received.ip, &payload->ip, sizeof(payload->ip)) != 0) {
netif_err(efx, drv, efx->net_dev,
"saw corrupted IP header in %s loopback test\n",
LOOPBACK_MODE(efx));
......@@ -332,7 +337,7 @@ void efx_siena_loopback_rx_packet(struct efx_nic *efx,
}
/* Check that msg and padding matches */
if (memcmp(&received->msg, &payload->msg, sizeof(received->msg)) != 0) {
if (memcmp(&received.msg, &payload->msg, sizeof(received.msg)) != 0) {
netif_err(efx, drv, efx->net_dev,
"saw corrupted RX packet in %s loopback test\n",
LOOPBACK_MODE(efx));
......@@ -340,10 +345,10 @@ void efx_siena_loopback_rx_packet(struct efx_nic *efx,
}
/* Check that iteration matches */
if (received->iteration != payload->iteration) {
if (received.iteration != payload->iteration) {
netif_err(efx, drv, efx->net_dev,
"saw RX packet from iteration %d (wanted %d) in "
"%s loopback test\n", ntohs(received->iteration),
"%s loopback test\n", ntohs(received.iteration),
ntohs(payload->iteration), LOOPBACK_MODE(efx));
goto err;
}
......@@ -363,7 +368,8 @@ void efx_siena_loopback_rx_packet(struct efx_nic *efx,
buf_ptr, pkt_len, 0);
netif_err(efx, drv, efx->net_dev, "expected packet:\n");
print_hex_dump(KERN_ERR, "", DUMP_PREFIX_OFFSET, 0x10, 1,
&state->payload, sizeof(state->payload), 0);
&state->payload.header, EFX_LOOPBACK_PAYLOAD_LEN,
0);
}
#endif
atomic_inc(&state->rx_bad);
......@@ -385,14 +391,15 @@ static void efx_iterate_state(struct efx_nic *efx)
payload->ip.daddr = htonl(INADDR_LOOPBACK);
payload->ip.ihl = 5;
payload->ip.check = (__force __sum16) htons(0xdead);
payload->ip.tot_len = htons(sizeof(*payload) - sizeof(struct ethhdr));
payload->ip.tot_len = htons(sizeof(*payload) -
offsetof(struct efx_loopback_payload, ip));
payload->ip.version = IPVERSION;
payload->ip.protocol = IPPROTO_UDP;
/* Initialise udp header */
payload->udp.source = 0;
payload->udp.len = htons(sizeof(*payload) - sizeof(struct ethhdr) -
sizeof(struct iphdr));
payload->udp.len = htons(sizeof(*payload) -
offsetof(struct efx_loopback_payload, udp));
payload->udp.check = 0; /* checksum ignored */
/* Fill out payload */
......@@ -418,7 +425,7 @@ static int efx_begin_loopback(struct efx_tx_queue *tx_queue)
for (i = 0; i < state->packet_count; i++) {
/* Allocate an skb, holding an extra reference for
* transmit completion counting */
skb = alloc_skb(sizeof(state->payload), GFP_KERNEL);
skb = alloc_skb(EFX_LOOPBACK_PAYLOAD_LEN, GFP_KERNEL);
if (!skb)
return -ENOMEM;
state->skbs[i] = skb;
......@@ -429,6 +436,8 @@ static int efx_begin_loopback(struct efx_tx_queue *tx_queue)
payload = skb_put(skb, sizeof(state->payload));
memcpy(payload, &state->payload, sizeof(state->payload));
payload->ip.saddr = htonl(INADDR_LOOPBACK | (i << 2));
/* Strip off the leading padding */
skb_pull(skb, offsetof(struct efx_loopback_payload, header));
/* Ensure everything we've written is visible to the
* interrupt handler. */
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment