Commit 31160006 authored by Sonika Jindal's avatar Sonika Jindal Committed by Daniel Vetter

drm/gma500: Renaming DP training vswing pre emph defines

Rename the defines to have levels instead of values for vswing and
pre-emph levels as the values may differ in other scenarios like low vswing of
eDP1.4 where the values are different.

Done using following cocci patch for each define:
@@
@@

 # define DP_TRAIN_VOLTAGE_SWING_400     (0 << 0)
+ # define DP_TRAIN_VOLTAGE_SWING_LEVEL_0     (0 << 0)

...
Signed-off-by: default avatarSonika Jindal <sonika.jindal@intel.com>
Acked-by: default avatarDave Airlie <airlied@gmail.com>
Signed-off-by: default avatarDaniel Vetter <daniel.vetter@ffwll.ch>
parent 0ded9254
...@@ -1089,7 +1089,7 @@ static char *link_train_names[] = { ...@@ -1089,7 +1089,7 @@ static char *link_train_names[] = {
}; };
#endif #endif
#define CDV_DP_VOLTAGE_MAX DP_TRAIN_VOLTAGE_SWING_1200 #define CDV_DP_VOLTAGE_MAX DP_TRAIN_VOLTAGE_SWING_LEVEL_3
/* /*
static uint8_t static uint8_t
cdv_intel_dp_pre_emphasis_max(uint8_t voltage_swing) cdv_intel_dp_pre_emphasis_max(uint8_t voltage_swing)
...@@ -1276,7 +1276,7 @@ cdv_intel_dp_set_vswing_premph(struct gma_encoder *encoder, uint8_t signal_level ...@@ -1276,7 +1276,7 @@ cdv_intel_dp_set_vswing_premph(struct gma_encoder *encoder, uint8_t signal_level
cdv_sb_write(dev, ddi_reg->VSwing2, dp_vswing_premph_table[index]); cdv_sb_write(dev, ddi_reg->VSwing2, dp_vswing_premph_table[index]);
/* ;gfx_dpio_set_reg(0x814c, 0x40802040) */ /* ;gfx_dpio_set_reg(0x814c, 0x40802040) */
if ((vswing + premph) == DP_TRAIN_VOLTAGE_SWING_1200) if ((vswing + premph) == DP_TRAIN_VOLTAGE_SWING_LEVEL_3)
cdv_sb_write(dev, ddi_reg->VSwing3, 0x70802040); cdv_sb_write(dev, ddi_reg->VSwing3, 0x70802040);
else else
cdv_sb_write(dev, ddi_reg->VSwing3, 0x40802040); cdv_sb_write(dev, ddi_reg->VSwing3, 0x40802040);
......
...@@ -116,30 +116,30 @@ parse_edp(struct drm_psb_private *dev_priv, struct bdb_header *bdb) ...@@ -116,30 +116,30 @@ parse_edp(struct drm_psb_private *dev_priv, struct bdb_header *bdb)
switch (edp_link_params->preemphasis) { switch (edp_link_params->preemphasis) {
case 0: case 0:
dev_priv->edp.preemphasis = DP_TRAIN_PRE_EMPHASIS_0; dev_priv->edp.preemphasis = DP_TRAIN_PRE_EMPH_LEVEL_0;
break; break;
case 1: case 1:
dev_priv->edp.preemphasis = DP_TRAIN_PRE_EMPHASIS_3_5; dev_priv->edp.preemphasis = DP_TRAIN_PRE_EMPH_LEVEL_1;
break; break;
case 2: case 2:
dev_priv->edp.preemphasis = DP_TRAIN_PRE_EMPHASIS_6; dev_priv->edp.preemphasis = DP_TRAIN_PRE_EMPH_LEVEL_2;
break; break;
case 3: case 3:
dev_priv->edp.preemphasis = DP_TRAIN_PRE_EMPHASIS_9_5; dev_priv->edp.preemphasis = DP_TRAIN_PRE_EMPH_LEVEL_3;
break; break;
} }
switch (edp_link_params->vswing) { switch (edp_link_params->vswing) {
case 0: case 0:
dev_priv->edp.vswing = DP_TRAIN_VOLTAGE_SWING_400; dev_priv->edp.vswing = DP_TRAIN_VOLTAGE_SWING_LEVEL_0;
break; break;
case 1: case 1:
dev_priv->edp.vswing = DP_TRAIN_VOLTAGE_SWING_600; dev_priv->edp.vswing = DP_TRAIN_VOLTAGE_SWING_LEVEL_1;
break; break;
case 2: case 2:
dev_priv->edp.vswing = DP_TRAIN_VOLTAGE_SWING_800; dev_priv->edp.vswing = DP_TRAIN_VOLTAGE_SWING_LEVEL_2;
break; break;
case 3: case 3:
dev_priv->edp.vswing = DP_TRAIN_VOLTAGE_SWING_1200; dev_priv->edp.vswing = DP_TRAIN_VOLTAGE_SWING_LEVEL_3;
break; break;
} }
DRM_DEBUG_KMS("VBT reports EDP: VSwing %d, Preemph %d\n", DRM_DEBUG_KMS("VBT reports EDP: VSwing %d, Preemph %d\n",
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment