powerpc/b4860emu: Add device tree file for b4860emu

B4860EMU is a emualtor target with minimum peripherals. It is based on
B4860QDS and trimmed down most peripherals due to either not modeled or
lack of board level connections. The main purpose of this minimum dts is
to speed up booting on emulator.
Signed-off-by: York Sun <yorksun@freescale.com>
[scottwood@freescale.com: whitespace fix]
Signed-off-by: Scott Wood <scottwood@freescale.com>

arch/powerpc/boot/dts/b4860emu.dts

+/*
+ * B4860 emulator Device Tree Source
+ *
+ * Copyright 2013 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * This software is provided by Freescale Semiconductor "as is" and any
+ * express or implied warranties, including, but not limited to, the implied
+ * warranties of merchantability and fitness for a particular purpose are
+ * disclaimed. In no event shall Freescale Semiconductor be liable for any
+ * direct, indirect, incidental, special, exemplary, or consequential damages
+ * (including, but not limited to, procurement of substitute goods or services;
+ * loss of use, data, or profits; or business interruption) however caused and
+ * on any theory of liability, whether in contract, strict liability, or tort
+ * (including negligence or otherwise) arising in any way out of the use of
+ * this software, even if advised of the possibility of such damage.
+ */
+
+/dts-v1/;
+
+/include/ "fsl/e6500_power_isa.dtsi"
+
+/ {
+	compatible = "fsl,B4860";
+	#address-cells = <2>;
+	#size-cells = <2>;
+	interrupt-parent = <&mpic>;
+
+	aliases {
+		ccsr = &soc;
+
+		serial0 = &serial0;
+		serial1 = &serial1;
+		serial2 = &serial2;
+		serial3 = &serial3;
+		dma0 = &dma0;
+		dma1 = &dma1;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: PowerPC,e6500@0 {
+			device_type = "cpu";
+			reg = <0 1>;
+			next-level-cache = <&L2>;
+		};
+		cpu1: PowerPC,e6500@2 {
+			device_type = "cpu";
+			reg = <2 3>;
+			next-level-cache = <&L2>;
+		};
+		cpu2: PowerPC,e6500@4 {
+			device_type = "cpu";
+			reg = <4 5>;
+			next-level-cache = <&L2>;
+		};
+		cpu3: PowerPC,e6500@6 {
+			device_type = "cpu";
+			reg = <6 7>;
+			next-level-cache = <&L2>;
+		};
+	};
+};
+
+/ {
+	model = "fsl,B4860QDS";
+	compatible = "fsl,B4860EMU", "fsl,B4860QDS";
+	#address-cells = <2>;
+	#size-cells = <2>;
+	interrupt-parent = <&mpic>;
+
+	ifc: localbus@ffe124000 {
+		reg = <0xf 0xfe124000 0 0x2000>;
+		ranges = <0 0 0xf 0xe8000000 0x08000000
+			  2 0 0xf 0xff800000 0x00010000
+			  3 0 0xf 0xffdf0000 0x00008000>;
+
+		nor@0,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "cfi-flash";
+			reg = <0x0 0x0 0x8000000>;
+			bank-width = <2>;
+			device-width = <1>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+	};
+
+	soc: soc@ffe000000 {
+		ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
+		reg = <0xf 0xfe000000 0 0x00001000>;
+	};
+};
+
+&ifc {
+	#address-cells = <2>;
+	#size-cells = <1>;
+	compatible = "fsl,ifc", "simple-bus";
+	interrupts = <25 2 0 0>;
+};
+
+&soc {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	device_type = "soc";
+	compatible = "simple-bus";
+
+	soc-sram-error {
+		compatible = "fsl,soc-sram-error";
+		interrupts = <16 2 1 2>;
+	};
+
+	corenet-law@0 {
+		compatible = "fsl,corenet-law";
+		reg = <0x0 0x1000>;
+		fsl,num-laws = <32>;
+	};
+
+	ddr1: memory-controller@8000 {
+		compatible = "fsl,qoriq-memory-controller-v4.5", "fsl,qoriq-memory-controller";
+		reg = <0x8000 0x1000>;
+		interrupts = <16 2 1 8>;
+	};
+
+	ddr2: memory-controller@9000 {
+		compatible = "fsl,qoriq-memory-controller-v4.5","fsl,qoriq-memory-controller";
+		reg = <0x9000 0x1000>;
+		interrupts = <16 2 1 9>;
+	};
+
+	cpc: l3-cache-controller@10000 {
+		compatible = "fsl,b4-l3-cache-controller", "cache";
+		reg = <0x10000 0x1000
+		       0x11000 0x1000>;
+		interrupts = <16 2 1 4>;
+	};
+
+	corenet-cf@18000 {
+		compatible = "fsl,b4-corenet-cf";
+		reg = <0x18000 0x1000>;
+		interrupts = <16 2 1 0>;
+		fsl,ccf-num-csdids = <32>;
+		fsl,ccf-num-snoopids = <32>;
+	};
+
+	iommu@20000 {
+		compatible = "fsl,pamu-v1.0", "fsl,pamu";
+		reg = <0x20000 0x4000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		interrupts = <
+			24 2 0 0
+			16 2 1 1>;
+		pamu0: pamu@0 {
+			reg = <0 0x1000>;
+			fsl,primary-cache-geometry = <8 1>;
+			fsl,secondary-cache-geometry = <32 2>;
+		};
+	};
+
+/include/ "fsl/qoriq-mpic.dtsi"
+
+	guts: global-utilities@e0000 {
+		compatible = "fsl,b4-device-config";
+		reg = <0xe0000 0xe00>;
+		fsl,has-rstcr;
+		fsl,liodn-bits = <12>;
+	};
+
+	clockgen: global-utilities@e1000 {
+		compatible = "fsl,b4-clockgen", "fsl,qoriq-clockgen-2.0";
+		reg = <0xe1000 0x1000>;
+	};
+
+/include/ "fsl/qoriq-dma-0.dtsi"
+	dma@100300 {
+		fsl,iommu-parent = <&pamu0>;
+		fsl,liodn-reg = <&guts 0x580>; /* DMA1LIODNR */
+	};
+
+/include/ "fsl/qoriq-dma-1.dtsi"
+	dma@101300 {
+		fsl,iommu-parent = <&pamu0>;
+		fsl,liodn-reg = <&guts 0x584>; /* DMA2LIODNR */
+	};
+
+/include/ "fsl/qoriq-i2c-0.dtsi"
+/include/ "fsl/qoriq-i2c-1.dtsi"
+/include/ "fsl/qoriq-duart-0.dtsi"
+/include/ "fsl/qoriq-duart-1.dtsi"
+
+	L2: l2-cache-controller@c20000 {
+		compatible = "fsl,b4-l2-cache-controller";
+		reg = <0xc20000 0x1000>;
+		next-level-cache = <&cpc>;
+	};
+};