Skip to content

L
linux
Commit 319d013a authored by Huang, Xiong's avatar Huang, Xiong Committed by David S. Miller
Browse files
Options

atl1c: add function atl1c_power_saving 

This function is used for suspend of S1/S3/S4 and driver remove.
It sets MAC/PHY based on the WoL configuation to get lower power
consumption.
atl1c_phy_power_saving is renamed to atl1c_phy_to_ps_link, this
function is just make PHY enter a link/speed mode to eat less
power.
REG_MAC_CTRL register is refined as well.
Signed-off-by: default avatarxiong <xiong@qca.qualcomm.com>
Tested-by: default avatarLiu David <dwliu@qca.qualcomm.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent 52a12fc7
Show whitespace changes
Inline Side-by-side
Showing with 108 additions and 126 deletions
drivers/net/ethernet/atheros/atl1c/atl1c_hw.c
View file @ 319d013a
......@@ -525,14 +525,7 @@ static int atl1c_phy_setup_adv(struct atl1c_hw *hw)
void atl1c_phy_disable(struct atl1c_hw *hw)
{
u32 phy_ctrl_data;
AT_READ_REG(hw, REG_GPHY_CTRL, &phy_ctrl_data);
phy_ctrl_data &= ~(GPHY_CTRL_EXT_RESET | GPHY_CTRL_CLS);
phy_ctrl_data |= GPHY_CTRL_SEL_ANA_RST | GPHY_CTRL_HIB_PULSE |
GPHY_CTRL_HIB_EN | GPHY_CTRL_PHY_IDDQ |
GPHY_CTRL_PWDOWN_HW;
AT_WRITE_REGW(hw, REG_GPHY_CTRL, phy_ctrl_data);
atl1c_power_saving(hw, 0);
}
......@@ -722,7 +715,8 @@ int atl1c_get_speed_and_duplex(struct atl1c_hw *hw, u16 *speed, u16 *duplex)
return 0;
}
int atl1c_phy_power_saving(struct atl1c_hw *hw)
/* select one link mode to get lower power consumption */
int atl1c_phy_to_ps_link(struct atl1c_hw *hw)
{
struct atl1c_adapter *adapter = (struct atl1c_adapter *)hw->adapter;
struct pci_dev *pdev = adapter->pdev;
......@@ -793,3 +787,64 @@ int atl1c_restart_autoneg(struct atl1c_hw *hw)
return atl1c_write_phy_reg(hw, MII_BMCR, mii_bmcr_data);
}
int atl1c_power_saving(struct atl1c_hw *hw, u32 wufc)
{
struct atl1c_adapter *adapter = (struct atl1c_adapter *)hw->adapter;
struct pci_dev *pdev = adapter->pdev;
u32 master_ctrl, mac_ctrl, phy_ctrl;
u32 wol_ctrl, speed;
u16 phy_data;
wol_ctrl = 0;
speed = adapter->link_speed == SPEED_1000 ?
MAC_CTRL_SPEED_1000 : MAC_CTRL_SPEED_10_100;
AT_READ_REG(hw, REG_MASTER_CTRL, &master_ctrl);
AT_READ_REG(hw, REG_MAC_CTRL, &mac_ctrl);
AT_READ_REG(hw, REG_GPHY_CTRL, &phy_ctrl);
master_ctrl &= ~MASTER_CTRL_CLK_SEL_DIS;
mac_ctrl = FIELD_SETX(mac_ctrl, MAC_CTRL_SPEED, speed);
mac_ctrl &= ~(MAC_CTRL_DUPLX | MAC_CTRL_RX_EN | MAC_CTRL_TX_EN);
if (adapter->link_duplex == FULL_DUPLEX)
mac_ctrl |= MAC_CTRL_DUPLX;
phy_ctrl &= ~(GPHY_CTRL_EXT_RESET | GPHY_CTRL_CLS);
phy_ctrl |= GPHY_CTRL_SEL_ANA_RST | GPHY_CTRL_HIB_PULSE |
GPHY_CTRL_HIB_EN;
if (!wufc) { /* without WoL */
master_ctrl |= MASTER_CTRL_CLK_SEL_DIS;
phy_ctrl |= GPHY_CTRL_PHY_IDDQ | GPHY_CTRL_PWDOWN_HW;
AT_WRITE_REG(hw, REG_MASTER_CTRL, master_ctrl);
AT_WRITE_REG(hw, REG_MAC_CTRL, mac_ctrl);
AT_WRITE_REG(hw, REG_GPHY_CTRL, phy_ctrl);
AT_WRITE_REG(hw, REG_WOL_CTRL, 0);
hw->phy_configured = false; /* re-init PHY when resume */
return 0;
}
phy_ctrl |= GPHY_CTRL_EXT_RESET;
if (wufc & AT_WUFC_MAG) {
mac_ctrl |= MAC_CTRL_RX_EN | MAC_CTRL_BC_EN;
wol_ctrl |= WOL_MAGIC_EN | WOL_MAGIC_PME_EN;
if (hw->nic_type == athr_l2c_b && hw->revision_id == L2CB_V11)
wol_ctrl |= WOL_PATTERN_EN | WOL_PATTERN_PME_EN;
}
if (wufc & AT_WUFC_LNKC) {
wol_ctrl |= WOL_LINK_CHG_EN | WOL_LINK_CHG_PME_EN;
if (atl1c_write_phy_reg(hw, MII_IER, IER_LINK_UP) != 0) {
dev_dbg(&pdev->dev, "%s: write phy MII_IER faild.\n",
atl1c_driver_name);
}
}
/* clear PHY interrupt */
atl1c_read_phy_reg(hw, MII_ISR, &phy_data);
dev_dbg(&pdev->dev, "%s: suspend MAC=%x,MASTER=%x,PHY=0x%x,WOL=%x\n",
atl1c_driver_name, mac_ctrl, master_ctrl, phy_ctrl, wol_ctrl);
AT_WRITE_REG(hw, REG_MASTER_CTRL, master_ctrl);
AT_WRITE_REG(hw, REG_MAC_CTRL, mac_ctrl);
AT_WRITE_REG(hw, REG_GPHY_CTRL, phy_ctrl);
AT_WRITE_REG(hw, REG_WOL_CTRL, wol_ctrl);
return 0;
}
drivers/net/ethernet/atheros/atl1c/atl1c_hw.h
View file @ 319d013a
......@@ -48,7 +48,8 @@ bool atl1c_read_eeprom(struct atl1c_hw *hw, u32 offset, u32 *p_value);
int atl1c_phy_init(struct atl1c_hw *hw);
int atl1c_check_eeprom_exist(struct atl1c_hw *hw);
int atl1c_restart_autoneg(struct atl1c_hw *hw);
int atl1c_phy_power_saving(struct atl1c_hw *hw);
int atl1c_phy_to_ps_link(struct atl1c_hw *hw);
int atl1c_power_saving(struct atl1c_hw *hw, u32 wufc);
bool atl1c_wait_mdio_idle(struct atl1c_hw *hw);
void atl1c_stop_phy_polling(struct atl1c_hw *hw);
void atl1c_start_phy_polling(struct atl1c_hw *hw, u16 clk_sel);
......@@ -63,6 +64,16 @@ int atl1c_write_phy_ext(struct atl1c_hw *hw, u8 dev_addr,
int atl1c_read_phy_dbg(struct atl1c_hw *hw, u16 reg_addr, u16 *phy_data);
int atl1c_write_phy_dbg(struct atl1c_hw *hw, u16 reg_addr, u16 phy_data);
/* hw-ids */
#define PCI_DEVICE_ID_ATTANSIC_L2C 0x1062
#define PCI_DEVICE_ID_ATTANSIC_L1C 0x1063
#define PCI_DEVICE_ID_ATHEROS_L2C_B 0x2060 /* AR8152 v1.1 Fast 10/100 */
#define PCI_DEVICE_ID_ATHEROS_L2C_B2 0x2062 /* AR8152 v2.0 Fast 10/100 */
#define PCI_DEVICE_ID_ATHEROS_L1D 0x1073 /* AR8151 v1.0 Gigabit 1000 */
#define PCI_DEVICE_ID_ATHEROS_L1D_2_0 0x1083 /* AR8151 v2.0 Gigabit 1000 */
#define L2CB_V10 0xc0
#define L2CB_V11 0xc1
/* register definition */
#define REG_DEVICE_CAP 0x5C
#define DEVICE_CAP_MAX_PAYLOAD_MASK 0x7
......@@ -366,35 +377,36 @@ int atl1c_write_phy_dbg(struct atl1c_hw *hw, u16 reg_addr, u16 phy_data);
/* MAC Control Register */
#define REG_MAC_CTRL 0x1480
#define MAC_CTRL_TX_EN 0x1
#define MAC_CTRL_RX_EN 0x2
#define MAC_CTRL_TX_FLOW 0x4
#define MAC_CTRL_RX_FLOW 0x8
#define MAC_CTRL_LOOPBACK 0x10
#define MAC_CTRL_DUPLX 0x20
#define MAC_CTRL_ADD_CRC 0x40
#define MAC_CTRL_PAD 0x80
#define MAC_CTRL_LENCHK 0x100
#define MAC_CTRL_HUGE_EN 0x200
#define MAC_CTRL_PRMLEN_SHIFT 10
#define MAC_CTRL_PRMLEN_MASK 0xf
#define MAC_CTRL_RMV_VLAN 0x4000
#define MAC_CTRL_PROMIS_EN 0x8000
#define MAC_CTRL_TX_PAUSE 0x10000
#define MAC_CTRL_SCNT 0x20000
#define MAC_CTRL_SRST_TX 0x40000
#define MAC_CTRL_TX_SIMURST 0x80000
#define MAC_CTRL_SPEED_MODE_SW BIT(30) /* 0:phy,1:sw */
#define MAC_CTRL_HASH_ALG_CRC32 BIT(29) /* 1:legacy,0:lw_5b */
#define MAC_CTRL_SINGLE_PAUSE_EN BIT(28)
#define MAC_CTRL_DBG BIT(27)
#define MAC_CTRL_BC_EN BIT(26)
#define MAC_CTRL_MC_ALL_EN BIT(25)
#define MAC_CTRL_RX_CHKSUM_EN BIT(24)
#define MAC_CTRL_TX_HUGE BIT(23)
#define MAC_CTRL_DBG_TX_BKPRESURE BIT(22)
#define MAC_CTRL_SPEED_MASK 3UL
#define MAC_CTRL_SPEED_SHIFT 20
#define MAC_CTRL_SPEED_MASK 0x3
#define MAC_CTRL_DBG_TX_BKPRESURE 0x400000
#define MAC_CTRL_TX_HUGE 0x800000
#define MAC_CTRL_RX_CHKSUM_EN 0x1000000
#define MAC_CTRL_MC_ALL_EN 0x2000000
#define MAC_CTRL_BC_EN 0x4000000
#define MAC_CTRL_DBG 0x8000000
#define MAC_CTRL_SINGLE_PAUSE_EN 0x10000000
#define MAC_CTRL_HASH_ALG_CRC32 0x20000000
#define MAC_CTRL_SPEED_MODE_SW 0x40000000
#define MAC_CTRL_SPEED_10_100 1
#define MAC_CTRL_SPEED_1000 2
#define MAC_CTRL_TX_SIMURST BIT(19)
#define MAC_CTRL_SCNT BIT(17)
#define MAC_CTRL_TX_PAUSE BIT(16)
#define MAC_CTRL_PROMIS_EN BIT(15)
#define MAC_CTRL_RMV_VLAN BIT(14)
#define MAC_CTRL_PRMLEN_MASK 0xFUL
#define MAC_CTRL_PRMLEN_SHIFT 10
#define MAC_CTRL_HUGE_EN BIT(9)
#define MAC_CTRL_LENCHK BIT(8)
#define MAC_CTRL_PAD BIT(7)
#define MAC_CTRL_ADD_CRC BIT(6)
#define MAC_CTRL_DUPLX BIT(5)
#define MAC_CTRL_LOOPBACK BIT(4)
#define MAC_CTRL_RX_FLOW BIT(3)
#define MAC_CTRL_TX_FLOW BIT(2)
#define MAC_CTRL_RX_EN BIT(1)
#define MAC_CTRL_TX_EN BIT(0)
/* MAC IPG/IFG Control Register */
#define REG_MAC_IPG_IFG 0x1484
......
drivers/net/ethernet/atheros/atl1c/atl1c_main.c
View file @ 319d013a
......@@ -24,14 +24,6 @@
#define ATL1C_DRV_VERSION "1.0.1.0-NAPI"
char atl1c_driver_name[] = "atl1c";
char atl1c_driver_version[] = ATL1C_DRV_VERSION;
#define PCI_DEVICE_ID_ATTANSIC_L2C 0x1062
#define PCI_DEVICE_ID_ATTANSIC_L1C 0x1063
#define PCI_DEVICE_ID_ATHEROS_L2C_B 0x2060 /* AR8152 v1.1 Fast 10/100 */
#define PCI_DEVICE_ID_ATHEROS_L2C_B2 0x2062 /* AR8152 v2.0 Fast 10/100 */
#define PCI_DEVICE_ID_ATHEROS_L1D 0x1073 /* AR8151 v1.0 Gigabit 1000 */
#define PCI_DEVICE_ID_ATHEROS_L1D_2_0 0x1083 /* AR8151 v2.0 Gigabit 1000 */
#define L2CB_V10 0xc0
#define L2CB_V11 0xc1
/*
* atl1c_pci_tbl - PCI Device ID Table
......@@ -2307,12 +2299,7 @@ static int atl1c_suspend(struct device *dev)
struct net_device *netdev = pci_get_drvdata(pdev);
struct atl1c_adapter *adapter = netdev_priv(netdev);
struct atl1c_hw *hw = &adapter->hw;
u32 mac_ctrl_data = 0;
u32 master_ctrl_data = 0;
u32 wol_ctrl_data = 0;
u16 mii_intr_status_data = 0;
u32 wufc = adapter->wol;
u32 phy_ctrl_data;
atl1c_disable_l0s_l1(hw);
if (netif_running(netdev)) {
......@@ -2322,82 +2309,10 @@ static int atl1c_suspend(struct device *dev)
netif_device_detach(netdev);
if (wufc)
if (atl1c_phy_power_saving(hw) != 0)
if (atl1c_phy_to_ps_link(hw) != 0)
dev_dbg(&pdev->dev, "phy power saving failed");
AT_READ_REG(hw, REG_MASTER_CTRL, &master_ctrl_data);
AT_READ_REG(hw, REG_MAC_CTRL, &mac_ctrl_data);
AT_READ_REG(hw, REG_GPHY_CTRL, &phy_ctrl_data);
master_ctrl_data &= ~MASTER_CTRL_CLK_SEL_DIS;
mac_ctrl_data &= ~(MAC_CTRL_PRMLEN_MASK << MAC_CTRL_PRMLEN_SHIFT);
mac_ctrl_data |= (((u32)adapter->hw.preamble_len &
MAC_CTRL_PRMLEN_MASK) <<
MAC_CTRL_PRMLEN_SHIFT);
mac_ctrl_data &= ~(MAC_CTRL_SPEED_MASK << MAC_CTRL_SPEED_SHIFT);
mac_ctrl_data &= ~MAC_CTRL_DUPLX;
phy_ctrl_data &= ~(GPHY_CTRL_EXT_RESET | GPHY_CTRL_CLS);
phy_ctrl_data |= GPHY_CTRL_SEL_ANA_RST | GPHY_CTRL_HIB_PULSE |
GPHY_CTRL_HIB_EN;
if (wufc) {
mac_ctrl_data |= MAC_CTRL_RX_EN;
phy_ctrl_data |= GPHY_CTRL_EXT_RESET;
if (adapter->link_speed == SPEED_1000 ||
adapter->link_speed == SPEED_0) {
mac_ctrl_data |= atl1c_mac_speed_1000 <<
MAC_CTRL_SPEED_SHIFT;
mac_ctrl_data |= MAC_CTRL_DUPLX;
} else
mac_ctrl_data |= atl1c_mac_speed_10_100 <<
MAC_CTRL_SPEED_SHIFT;
if (adapter->link_duplex == DUPLEX_FULL)
mac_ctrl_data |= MAC_CTRL_DUPLX;
/* turn on magic packet wol */
if (wufc & AT_WUFC_MAG) {
wol_ctrl_data |= WOL_MAGIC_EN | WOL_MAGIC_PME_EN;
if (hw->nic_type == athr_l2c_b &&
hw->revision_id == L2CB_V11) {
wol_ctrl_data |=
WOL_PATTERN_EN | WOL_PATTERN_PME_EN;
}
}
if (wufc & AT_WUFC_LNKC) {
wol_ctrl_data |= WOL_LINK_CHG_EN | WOL_LINK_CHG_PME_EN;
/* only link up can wake up */
if (atl1c_write_phy_reg(hw, MII_IER, IER_LINK_UP) != 0) {
dev_dbg(&pdev->dev, "%s: read write phy "
"register failed.\n",
atl1c_driver_name);
}
}
/* clear phy interrupt */
atl1c_read_phy_reg(hw, MII_ISR, &mii_intr_status_data);
/* Config MAC Ctrl register */
__atl1c_vlan_mode(netdev->features, &mac_ctrl_data);
/* magic packet maybe Broadcast&multicast&Unicast frame */
if (wufc & AT_WUFC_MAG)
mac_ctrl_data |= MAC_CTRL_BC_EN;
dev_dbg(&pdev->dev,
"%s: suspend MAC=0x%x\n",
atl1c_driver_name, mac_ctrl_data);
} else {
master_ctrl_data |= MASTER_CTRL_CLK_SEL_DIS;
mac_ctrl_data |= atl1c_mac_speed_10_100 << MAC_CTRL_SPEED_SHIFT;
mac_ctrl_data |= MAC_CTRL_DUPLX;
phy_ctrl_data |= GPHY_CTRL_PHY_IDDQ | GPHY_CTRL_PWDOWN_HW;
wol_ctrl_data = 0;
hw->phy_configured = false; /* re-init PHY when resume */
}
AT_WRITE_REG(hw, REG_MASTER_CTRL, master_ctrl_data);
AT_WRITE_REG(hw, REG_MAC_CTRL, mac_ctrl_data);
AT_WRITE_REG(hw, REG_GPHY_CTRL, phy_ctrl_data);
AT_WRITE_REG(hw, REG_WOL_CTRL, wol_ctrl_data);
atl1c_power_saving(hw, wufc);
return 0;
}
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7