[PATCH] clean up ACPI GSI/IRQ conversions (i386 part)

Add "acpi_gsi_to_irq()" as a generic replacement for "acpi_irq_to_vector()".
This converts from an ACPI global system interrupt number to a Linux IRQ.
Also, convert i386-specific terminology to use GSI when appropriate.

arch/i386/kernel/acpi/boot.c

@@ -351,6 +351,7 @@ __setup("acpi_pic_sci=", acpi_pic_sci_setup);
 #endif /* CONFIG_ACPI_BUS */
 
 #ifdef CONFIG_X86_IO_APIC
+/* deprecated in favor of acpi_gsi_to_irq */
 int acpi_irq_to_vector(u32 irq)
 {
 	if (use_pci_vector() && !platform_legacy_irq(irq))
@@ -359,6 +360,17 @@ int acpi_irq_to_vector(u32 irq)
 }
 #endif
 
+int acpi_gsi_to_irq(u32 gsi, unsigned int *irq)
+{
+#ifdef CONFIG_X86_IO_APIC
+	if (use_pci_vector() && !platform_legacy_irq(gsi))
+ 		*irq = IO_APIC_VECTOR(gsi);
+	else
+#endif
+		*irq = gsi;
+	return 0;
+}
+
 static unsigned long __init
 acpi_scan_rsdp (
 	unsigned long		start,

arch/i386/kernel/mpparse.c

 /*
- *	Intel Multiprocessor Specificiation 1.1 and 1.4
+ *	Intel Multiprocessor Specification 1.1 and 1.4
  *	compliant MP-table parsing routines.
  *
  *	(c) 1995 Alan Cox, Building #3 <alan@redhat.com>
@@ -851,25 +851,25 @@ void __init mp_register_lapic (
 
 struct mp_ioapic_routing {
 	int			apic_id;
-	int			irq_start;
-	int			irq_end;
+	int			gsi_base;
+	int			gsi_end;
 	u32			pin_programmed[4];
 } mp_ioapic_routing[MAX_IO_APICS];
 
 
 static int __init mp_find_ioapic (
-	int			irq)
+	int			gsi)
 {
 	int			i = 0;
 
-	/* Find the IOAPIC that manages this IRQ. */
+	/* Find the IOAPIC that manages this GSI. */
 	for (i = 0; i < nr_ioapics; i++) {
-		if ((irq >= mp_ioapic_routing[i].irq_start)
-			&& (irq <= mp_ioapic_routing[i].irq_end))
+		if ((gsi >= mp_ioapic_routing[i].gsi_base)
+			&& (gsi <= mp_ioapic_routing[i].gsi_end))
 			return i;
 	}
 
-	printk(KERN_ERR "ERROR: Unable to locate IOAPIC for IRQ %d\n", irq);
+	printk(KERN_ERR "ERROR: Unable to locate IOAPIC for GSI %d\n", gsi);
 
 	return -1;
 }
@@ -878,7 +878,7 @@ static int __init mp_find_ioapic (
 void __init mp_register_ioapic (
 	u8			id, 
 	u32			address,
-	u32			irq_base)
+	u32			gsi_base)
 {
 	int			idx = 0;
 
@@ -904,19 +904,19 @@ void __init mp_register_ioapic (
 	mp_ioapics[idx].mpc_apicver = io_apic_get_version(idx);
 	
 	/* 
-	 * Build basic IRQ lookup table to facilitate irq->io_apic lookups
-	 * and to prevent reprogramming of IOAPIC pins (PCI IRQs).
+	 * Build basic GSI lookup table to facilitate gsi->io_apic lookups
+	 * and to prevent reprogramming of IOAPIC pins (PCI GSIs).
 	 */
 	mp_ioapic_routing[idx].apic_id = mp_ioapics[idx].mpc_apicid;
-	mp_ioapic_routing[idx].irq_start = irq_base;
-	mp_ioapic_routing[idx].irq_end = irq_base + 
+	mp_ioapic_routing[idx].gsi_base = gsi_base;
+	mp_ioapic_routing[idx].gsi_end = gsi_base + 
 		io_apic_get_redir_entries(idx);
 
 	printk("IOAPIC[%d]: apic_id %d, version %d, address 0x%lx, "
-		"IRQ %d-%d\n", idx, mp_ioapics[idx].mpc_apicid, 
+		"GSI %d-%d\n", idx, mp_ioapics[idx].mpc_apicid, 
 		mp_ioapics[idx].mpc_apicver, mp_ioapics[idx].mpc_apicaddr,
-		mp_ioapic_routing[idx].irq_start,
-		mp_ioapic_routing[idx].irq_end);
+		mp_ioapic_routing[idx].gsi_base,
+		mp_ioapic_routing[idx].gsi_end);
 
 	return;
 }
@@ -926,7 +926,7 @@ void __init mp_override_legacy_irq (
 	u8			bus_irq,
 	u8			polarity, 
 	u8			trigger, 
-	u32			global_irq)
+	u32			gsi)
 {
 	struct mpc_config_intsrc intsrc;
 	int			i = 0;
@@ -935,12 +935,12 @@ void __init mp_override_legacy_irq (
 	int			pin = -1;
 
 	/* 
-	 * Convert 'global_irq' to 'ioapic.pin'.
+	 * Convert 'gsi' to 'ioapic.pin'.
 	 */
-	ioapic = mp_find_ioapic(global_irq);
+	ioapic = mp_find_ioapic(gsi);
 	if (ioapic < 0)
 		return;
-	pin = global_irq - mp_ioapic_routing[ioapic].irq_start;
+	pin = gsi - mp_ioapic_routing[ioapic].gsi_base;
 
 	/*
 	 * TBD: This check is for faulty timer entries, where the override
@@ -965,7 +965,7 @@ void __init mp_override_legacy_irq (
 
 	/* 
 	 * If an existing [IOAPIC.PIN -> IRQ] routing entry exists we override it.
-	 * Otherwise create a new entry (e.g. global_irq == 2).
+	 * Otherwise create a new entry (e.g. gsi == 2).
 	 */
 	for (i = 0; i < mp_irq_entries; i++) {
 		if ((mp_irqs[i].mpc_srcbus == intsrc.mpc_srcbus) 
@@ -1036,7 +1036,7 @@ void __init mp_config_acpi_legacy_irqs (void)
 
 extern FADT_DESCRIPTOR acpi_fadt;
 
-void __init mp_config_ioapic_for_sci(int irq)
+void __init mp_config_ioapic_for_sci(u32 gsi)
 {
 	int ioapic;
 	int ioapic_pin;
@@ -1083,11 +1083,11 @@ void __init mp_config_ioapic_for_sci(int irq)
 	 */
 	flags = entry->flags;
 	acpi_fadt.sci_int = entry->global_irq;
-	irq = entry->global_irq;
+	gsi = entry->global_irq;
 
-	ioapic = mp_find_ioapic(irq);
+	ioapic = mp_find_ioapic(gsi);
 
-	ioapic_pin = irq - mp_ioapic_routing[ioapic].irq_start;
+	ioapic_pin = gsi - mp_ioapic_routing[ioapic].gsi_base;
 
 	/*
 	 * MPS INTI flags:
@@ -1095,7 +1095,7 @@ void __init mp_config_ioapic_for_sci(int irq)
 	 *  polarity: 0=default, 1=high, 3=low
 	 * Per ACPI spec, default for SCI means level/low.
 	 */
-	io_apic_set_pci_routing(ioapic, ioapic_pin, irq, 
+	io_apic_set_pci_routing(ioapic, ioapic_pin, gsi, 
 		(flags.trigger == 1 ? 0 : 1), (flags.polarity == 1 ? 0 : 1));
 }
 
@@ -1107,7 +1107,7 @@ void __init mp_parse_prt (void)
 	struct acpi_prt_entry	*entry = NULL;
 	int			ioapic = -1;
 	int			ioapic_pin = 0;
-	int			irq = 0;
+	int			gsi = 0;
 	int			idx, bit = 0;
 	int			edge_level = 0;
 	int			active_high_low = 0;
@@ -1119,39 +1119,39 @@ void __init mp_parse_prt (void)
 	list_for_each(node, &acpi_prt.entries) {
 		entry = list_entry(node, struct acpi_prt_entry, node);
 
-		/* Need to get irq for dynamic entry */
+		/* Need to get gsi for dynamic entry */
 		if (entry->link.handle) {
-			irq = acpi_pci_link_get_irq(entry->link.handle, entry->link.index, &edge_level, &active_high_low);
-			if (!irq)
+			gsi = acpi_pci_link_get_irq(entry->link.handle, entry->link.index, &edge_level, &active_high_low);
+			if (!gsi)
 				continue;
 		}
 		else {
-			/* Hardwired IRQ. Assume PCI standard settings */
-			irq = entry->link.index;
+			/* Hardwired GSI. Assume PCI standard settings */
+			gsi = entry->link.index;
 			edge_level = 1;
 			active_high_low = 1;
 		}
 
 		/* Don't set up the ACPI SCI because it's already set up */
-                if (acpi_fadt.sci_int == irq) {
-			irq = acpi_irq_to_vector(irq);
-			entry->irq = irq; /* we still need to set entry's irq */
+                if (acpi_fadt.sci_int == gsi) {
+			/* we still need to set entry's irq */
+			acpi_gsi_to_irq(gsi, &entry->irq);
 			continue;
                 }
 	
-		ioapic = mp_find_ioapic(irq);
+		ioapic = mp_find_ioapic(gsi);
 		if (ioapic < 0)
 			continue;
-		ioapic_pin = irq - mp_ioapic_routing[ioapic].irq_start;
+		ioapic_pin = gsi - mp_ioapic_routing[ioapic].gsi_base;
 
 		if (es7000_plat) {
-			if (!ioapic && (irq < 16))
-				irq += 16;
+			if (!ioapic && (gsi < 16))
+				gsi += 16;
 		}
 
 		/* 
 		 * Avoid pin reprogramming.  PRTs typically include entries  
-		 * with redundant pin->irq mappings (but unique PCI devices);
+		 * with redundant pin->gsi mappings (but unique PCI devices);
 		 * we only only program the IOAPIC on the first.
 		 */
 		bit = ioapic_pin % 32;
@@ -1165,14 +1165,14 @@ void __init mp_parse_prt (void)
 		if ((1<<bit) & mp_ioapic_routing[ioapic].pin_programmed[idx]) {
 			Dprintk(KERN_DEBUG "Pin %d-%d already programmed\n",
 				mp_ioapic_routing[ioapic].apic_id, ioapic_pin);
- 			entry->irq = acpi_irq_to_vector(irq);
+			acpi_gsi_to_irq(gsi, &entry->irq);
 			continue;
 		}
 
 		mp_ioapic_routing[ioapic].pin_programmed[idx] |= (1<<bit);
 
-		if (!io_apic_set_pci_routing(ioapic, ioapic_pin, irq, edge_level, active_high_low)) {
- 			entry->irq = acpi_irq_to_vector(irq);
+		if (!io_apic_set_pci_routing(ioapic, ioapic_pin, gsi, edge_level, active_high_low)) {
+			acpi_gsi_to_irq(gsi, &entry->irq);
 		}
 		printk(KERN_DEBUG "%02x:%02x:%02x[%c] -> %d-%d -> IRQ %d\n",
 			entry->id.segment, entry->id.bus,

include/asm-i386/acpi.h

@@ -123,9 +123,10 @@ static inline void disable_acpi(void) { acpi_disabled = 1; acpi_ht = 0; }
 /* Fixmap pages to reserve for ACPI boot-time tables (see fixmap.h) */
 #define FIX_ACPI_PAGES 4
 
+extern int acpi_gsi_to_irq(u32 gsi, unsigned int *irq);
 #ifdef CONFIG_X86_IO_APIC
 extern int skip_ioapic_setup;
-extern int acpi_irq_to_vector(u32 irq);
+extern int acpi_irq_to_vector(u32 irq);	/* deprecated in favor of acpi_gsi_to_irq */
 
 static inline void disable_ioapic_setup(void)
 {

include/asm-i386/mpspec.h

@@ -30,15 +30,15 @@ extern int using_apic_timer;
 #ifdef CONFIG_ACPI_BOOT
 extern void mp_register_lapic (u8 id, u8 enabled);
 extern void mp_register_lapic_address (u64 address);
-extern void mp_register_ioapic (u8 id, u32 address, u32 irq_base);
-extern void mp_override_legacy_irq (u8 bus_irq, u8 polarity, u8 trigger, u32 global_irq);
+extern void mp_register_ioapic (u8 id, u32 address, u32 gsi_base);
+extern void mp_override_legacy_irq (u8 bus_irq, u8 polarity, u8 trigger, u32 gsi);
 extern void mp_config_acpi_legacy_irqs (void);
 extern void mp_parse_prt (void);
 
 #ifdef CONFIG_X86_IO_APIC
-extern void mp_config_ioapic_for_sci(int irq);
+extern void mp_config_ioapic_for_sci(u32 gsi);
 #else
-static inline void mp_config_ioapic_for_sci(int irq)
+static inline void mp_config_ioapic_for_sci(u32 gsi)
 { }
 #endif
 #endif /*CONFIG_ACPI_BOOT*/