tpm_tis_spi: Remove limitation of transfers to MAX_SPI_FRAMESIZE bytes

commit 591e48c2 upstream.

Limiting transfers to MAX_SPI_FRAMESIZE was not expected by the upper
layers, as tpm_tis has no such limitation. Add a loop to hide that
limitation.

v2: Moved scope of spi_message to the top as requested by Jarkko
Fixes: 0edbfea5 ("tpm/tpm_tis_spi: Add support for spi phy")
Signed-off-by: Alexander Steffen <Alexander.Steffen@infineon.com>
Signed-off-by: Peter Huewe <peter.huewe@infineon.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Tested-by: Benoit Houyere <benoit.houyere@st.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/char/tpm/tpm_tis_spi.c

@@ -60,27 +60,30 @@ static int tpm_tis_spi_transfer(struct tpm_tis_data *data, u32 addr, u16 len,
 				u8 *buffer, u8 direction)
 {
 	struct tpm_tis_spi_phy *phy = to_tpm_tis_spi_phy(data);
-	int ret, i;
+	int ret = 0;
+	int i;
 	struct spi_message m;
-	struct spi_transfer spi_xfer = {
-		.tx_buf = phy->tx_buf,
-		.rx_buf = phy->rx_buf,
-		.len = 4,
-		.cs_change = 1,
-	};
-
-	if (len > MAX_SPI_FRAMESIZE)
-		return -ENOMEM;
+	struct spi_transfer spi_xfer;
+	u8 transfer_len;
+
+	spi_bus_lock(phy->spi_device->master);
 
-	phy->tx_buf[0] = direction | (len - 1);
+	while (len) {
+		transfer_len = min_t(u16, len, MAX_SPI_FRAMESIZE);
+
+		phy->tx_buf[0] = direction | (transfer_len - 1);
 		phy->tx_buf[1] = 0xd4;
 		phy->tx_buf[2] = addr >> 8;
 		phy->tx_buf[3] = addr;
 
+		memset(&spi_xfer, 0, sizeof(spi_xfer));
+		spi_xfer.tx_buf = phy->tx_buf;
+		spi_xfer.rx_buf = phy->rx_buf;
+		spi_xfer.len = 4;
+		spi_xfer.cs_change = 1;
+
 		spi_message_init(&m);
 		spi_message_add_tail(&spi_xfer, &m);
-
-	spi_bus_lock(phy->spi_device->master);
 		ret = spi_sync_locked(phy->spi_device, &m);
 		if (ret < 0)
 			goto exit;
@@ -107,7 +110,7 @@ static int tpm_tis_spi_transfer(struct tpm_tis_data *data, u32 addr, u16 len,
 		}
 
 		spi_xfer.cs_change = 0;
-	spi_xfer.len = len;
+		spi_xfer.len = transfer_len;
 
 		if (direction) {
 			spi_xfer.tx_buf = NULL;
@@ -120,6 +123,12 @@ static int tpm_tis_spi_transfer(struct tpm_tis_data *data, u32 addr, u16 len,
 		spi_message_init(&m);
 		spi_message_add_tail(&spi_xfer, &m);
 		ret = spi_sync_locked(phy->spi_device, &m);
+		if (ret < 0)
+			goto exit;
+
+		len -= transfer_len;
+		buffer += transfer_len;
+	}
 
 exit:
 	spi_bus_unlock(phy->spi_device->master);