Merge tag 'nand/fixes-for-4.13-rc4' of git://git.infradead.org/l2-mtd into MTD

"""
This PR contains both core and drivers fixes for 4.13.

Core fixes:
- Fix data interface setup for ONFI NANDs that do not support the SET
  FEATURES command
- Fix a kernel doc header
- Fix potential integer overflow when retrieving timing information
  from the parameter page
- Fix wrong OOB layout for small page NANDs

Driver fixes:
- Fix potential division-by-zero bug
- Fix backward compat with old atmel-nand DT bindings
- Fix ->setup_data_interface() in the atmel NAND driver
"""

drivers/mtd/nand/atmel/nand-controller.c

@@ -1201,7 +1201,7 @@ static int atmel_smc_nand_prepare_smcconf(struct atmel_nand *nand,
 	 * tRC < 30ns implies EDO mode. This controller does not support this
 	 * mode.
 	 */
-	if (conf->timings.sdr.tRC_min < 30)
+	if (conf->timings.sdr.tRC_min < 30000)
 		return -ENOTSUPP;
 
 	atmel_smc_cs_conf_init(smcconf);

drivers/mtd/nand/atmel/pmecc.c

@@ -945,6 +945,7 @@ struct atmel_pmecc *devm_atmel_pmecc_get(struct device *userdev)
 		 */
 		struct platform_device *pdev = to_platform_device(userdev);
 		const struct atmel_pmecc_caps *caps;
+		const struct of_device_id *match;
 
 		/* No PMECC engine available. */
 		if (!of_property_read_bool(userdev->of_node,
@@ -953,22 +954,12 @@ struct atmel_pmecc *devm_atmel_pmecc_get(struct device *userdev)
 
 		caps = &at91sam9g45_caps;
 
-		/*
-		 * Try to find the NFC subnode and extract the associated caps
-		 * from there.
-		 */
-		np = of_find_compatible_node(userdev->of_node, NULL,
-					     "atmel,sama5d3-nfc");
-		if (np) {
-			const struct of_device_id *match;
-
-			match = of_match_node(atmel_pmecc_legacy_match, np);
+		/* Find the caps associated to the NAND dev node. */
+		match = of_match_node(atmel_pmecc_legacy_match,
+				      userdev->of_node);
 		if (match && match->data)
 			caps = match->data;
 
-			of_node_put(np);
-		}
-
 		pmecc = atmel_pmecc_create(pdev, caps, 1, 2);
 	}
 

drivers/mtd/nand/nand_base.c

@@ -65,8 +65,14 @@ static int nand_ooblayout_ecc_sp(struct mtd_info *mtd, int section,
 
 	if (!section) {
 		oobregion->offset = 0;
+		if (mtd->oobsize == 16)
 			oobregion->length = 4;
+		else
+			oobregion->length = 3;
 	} else {
+		if (mtd->oobsize == 8)
+			return -ERANGE;
+
 		oobregion->offset = 6;
 		oobregion->length = ecc->total - 4;
 	}
@@ -1125,7 +1131,9 @@ static int nand_setup_data_interface(struct nand_chip *chip, int chipnr)
 	 * Ensure the timing mode has been changed on the chip side
 	 * before changing timings on the controller side.
 	 */
-	if (chip->onfi_version) {
+	if (chip->onfi_version &&
+	    (le16_to_cpu(chip->onfi_params.opt_cmd) &
+	     ONFI_OPT_CMD_SET_GET_FEATURES)) {
 		u8 tmode_param[ONFI_SUBFEATURE_PARAM_LEN] = {
 			chip->onfi_timing_mode_default,
 		};
@@ -2741,7 +2749,6 @@ static int nand_write_page_syndrome(struct mtd_info *mtd,
  * @buf: the data to write
  * @oob_required: must write chip->oob_poi to OOB
  * @page: page number to write
- * @cached: cached programming
  * @raw: use _raw version of write_page
  */
 static int nand_write_page(struct mtd_info *mtd, struct nand_chip *chip,

drivers/mtd/nand/nand_timings.c

@@ -311,9 +311,9 @@ int onfi_init_data_interface(struct nand_chip *chip,
 		struct nand_sdr_timings *timings = &iface->timings.sdr;
 
 		/* microseconds -> picoseconds */
-		timings->tPROG_max = 1000000UL * le16_to_cpu(params->t_prog);
-		timings->tBERS_max = 1000000UL * le16_to_cpu(params->t_bers);
-		timings->tR_max = 1000000UL * le16_to_cpu(params->t_r);
+		timings->tPROG_max = 1000000ULL * le16_to_cpu(params->t_prog);
+		timings->tBERS_max = 1000000ULL * le16_to_cpu(params->t_bers);
+		timings->tR_max = 1000000ULL * le16_to_cpu(params->t_r);
 
 		/* nanoseconds -> picoseconds */
 		timings->tCCS_min = 1000UL * le16_to_cpu(params->t_ccs);

drivers/mtd/nand/sunxi_nand.c

@@ -1728,6 +1728,10 @@ static int sunxi_nfc_setup_data_interface(struct mtd_info *mtd, int csline,
 	 */
 	chip->clk_rate = NSEC_PER_SEC / min_clk_period;
 	real_clk_rate = clk_round_rate(nfc->mod_clk, chip->clk_rate);
+	if (real_clk_rate <= 0) {
+		dev_err(nfc->dev, "Unable to round clk %lu\n", chip->clk_rate);
+		return -EINVAL;
+	}
 
 	/*
 	 * ONFI specification 3.1, paragraph 4.15.2 dictates that EDO data

include/linux/mtd/nand.h

@@ -681,10 +681,10 @@ struct nand_buffers {
  * @tWW_min: WP# transition to WE# low
  */
 struct nand_sdr_timings {
-	u32 tBERS_max;
+	u64 tBERS_max;
 	u32 tCCS_min;
-	u32 tPROG_max;
-	u32 tR_max;
+	u64 tPROG_max;
+	u64 tR_max;
 	u32 tALH_min;
 	u32 tADL_min;
 	u32 tALS_min;