Merge tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC fixes from Olof Johansson:
 "We didn't have a batch last week, so this one is slightly larger.

  None of them are scary though, a handful of fixes for small DT pieces,
  replacing properties with newer conventions.

  Highlights:
   - N900 fix for setting system revision
   - onenand init fix to avoid filesystem corruption
   - Clock fix for audio on Beaglebone-x15
   - Fixes on shmobile to deal with CONFIG_DEBUG_RODATA (default y in 4.6)

  + misc smaller stuff"

* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  MAINTAINERS: Extend info, add wiki and ml for meson arch
  MAINTAINERS: alpine: add a new maintainer and update the entry
  ARM: at91/dt: fix typo in sama5d2 pinmux descriptions
  ARM: OMAP2+: Fix onenand initialization to avoid filesystem corruption
  Revert "regulator: tps65217: remove tps65217.dtsi file"
  ARM: shmobile: Remove shmobile_boot_arg
  ARM: shmobile: Move shmobile_smp_{mpidr, fn, arg}[] from .text to .bss
  ARM: shmobile: r8a7779: Remove remainings of removed SCU boot setup code
  ARM: shmobile: Move shmobile_scu_base from .text to .bss
  ARM: OMAP2+: Fix omap_device for module reload on PM runtime forbid
  ARM: OMAP2+: Improve omap_device error for driver writers
  ARM: DTS: am57xx-beagle-x15: Select SYS_CLK2 for audio clocks
  ARM: dts: am335x/am57xx: replace gpio-key,wakeup with wakeup-source property
  ARM: OMAP2+: Set system_rev from ATAGS for n900
  ARM: dts: orion5x: fix the missing mtd flash on linkstation lswtgl
  ARM: dts: kirkwood: use unique machine name for ds112
  ARM: dts: imx6: remove bogus interrupt-parent from CAAM node

Documentation/devicetree/bindings/regulator/tps65217.txt

@@ -26,11 +26,7 @@ Example:
 		ti,pmic-shutdown-controller;
 
 		regulators {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
 			dcdc1_reg: dcdc1 {
-				reg = <0>;
 				regulator-min-microvolt = <900000>;
 				regulator-max-microvolt = <1800000>;
 				regulator-boot-on;
@@ -38,7 +34,6 @@ Example:
 			};
 
 			dcdc2_reg: dcdc2 {
-				reg = <1>;
 				regulator-min-microvolt = <900000>;
 				regulator-max-microvolt = <3300000>;
 				regulator-boot-on;
@@ -46,7 +41,6 @@ Example:
 			};
 
 			dcdc3_reg: dcc3 {
-				reg = <2>;
 				regulator-min-microvolt = <900000>;
 				regulator-max-microvolt = <1500000>;
 				regulator-boot-on;
@@ -54,7 +48,6 @@ Example:
 			};
 
 			ldo1_reg: ldo1 {
-				reg = <3>;
 				regulator-min-microvolt = <1000000>;
 				regulator-max-microvolt = <3300000>;
 				regulator-boot-on;
@@ -62,7 +55,6 @@ Example:
 			};
 
 			ldo2_reg: ldo2 {
-				reg = <4>;
 				regulator-min-microvolt = <900000>;
 				regulator-max-microvolt = <3300000>;
 				regulator-boot-on;
@@ -70,7 +62,6 @@ Example:
 			};
 
 			ldo3_reg: ldo3 {
-				reg = <5>;
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <3300000>;
 				regulator-boot-on;
@@ -78,7 +69,6 @@ Example:
 			};
 
 			ldo4_reg: ldo4 {
-				reg = <6>;
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <3300000>;
 				regulator-boot-on;

MAINTAINERS

@@ -920,17 +920,24 @@ M:	Emilio López <emilio@elopez.com.ar>
 S:	Maintained
 F:	drivers/clk/sunxi/
 
-ARM/Amlogic MesonX SoC support
+ARM/Amlogic Meson SoC support
 M:	Carlo Caione <carlo@caione.org>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
+L:	linux-meson@googlegroups.com
+W:	http://linux-meson.com/
 S:	Maintained
-F:	drivers/media/rc/meson-ir.c
-N:	meson[x68]
+F:	arch/arm/mach-meson/
+F:	arch/arm/boot/dts/meson*
+N:	meson
 
 ARM/Annapurna Labs ALPINE ARCHITECTURE
 M:	Tsahee Zidenberg <tsahee@annapurnalabs.com>
+M:	Antoine Tenart <antoine.tenart@free-electrons.com>
 S:	Maintained
 F:	arch/arm/mach-alpine/
+F:	arch/arm/boot/dts/alpine*
+F:	arch/arm64/boot/dts/al/
+F:	drivers/*/*alpine*
 
 ARM/ATMEL AT91RM9200, AT91SAM9 AND SAMA5 SOC SUPPORT
 M:	Nicolas Ferre <nicolas.ferre@atmel.com>

arch/arm/boot/dts/am335x-bone-common.dtsi

@@ -285,8 +285,10 @@ cape3_data: cape_data@0 {
 	};
 };
 
+
+/include/ "tps65217.dtsi"
+
 &tps {
-	compatible = "ti,tps65217";
 	/*
 	 * Configure pmic to enter OFF-state instead of SLEEP-state ("RTC-only
 	 * mode") at poweroff.  Most BeagleBone versions do not support RTC-only
@@ -307,17 +309,12 @@ &tps {
 	ti,pmic-shutdown-controller;
 
 	regulators {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
 		dcdc1_reg: regulator@0 {
-			reg = <0>;
 			regulator-name = "vdds_dpr";
 			regulator-always-on;
 		};
 
 		dcdc2_reg: regulator@1 {
-			reg = <1>;
 			/* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */
 			regulator-name = "vdd_mpu";
 			regulator-min-microvolt = <925000>;
@@ -327,7 +324,6 @@ dcdc2_reg: regulator@1 {
 		};
 
 		dcdc3_reg: regulator@2 {
-			reg = <2>;
 			/* VDD_CORE voltage limits 0.95V - 1.1V with +/-4% tolerance */
 			regulator-name = "vdd_core";
 			regulator-min-microvolt = <925000>;
@@ -337,25 +333,21 @@ dcdc3_reg: regulator@2 {
 		};
 
 		ldo1_reg: regulator@3 {
-			reg = <3>;
 			regulator-name = "vio,vrtc,vdds";
 			regulator-always-on;
 		};
 
 		ldo2_reg: regulator@4 {
-			reg = <4>;
 			regulator-name = "vdd_3v3aux";
 			regulator-always-on;
 		};
 
 		ldo3_reg: regulator@5 {
-			reg = <5>;
 			regulator-name = "vdd_1v8";
 			regulator-always-on;
 		};
 
 		ldo4_reg: regulator@6 {
-			reg = <6>;
 			regulator-name = "vdd_3v3a";
 			regulator-always-on;
 		};

arch/arm/boot/dts/am335x-chilisom.dtsi

@@ -128,21 +128,16 @@ tps: tps@24 {
 
 };
 
-&tps {
-	compatible = "ti,tps65217";
+/include/ "tps65217.dtsi"
 
+&tps {
 	regulators {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
 		dcdc1_reg: regulator@0 {
-			reg = <0>;
 			regulator-name = "vdds_dpr";
 			regulator-always-on;
 		};
 
 		dcdc2_reg: regulator@1 {
-			reg = <1>;
 			/* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */
 			regulator-name = "vdd_mpu";
 			regulator-min-microvolt = <925000>;
@@ -152,7 +147,6 @@ dcdc2_reg: regulator@1 {
 		};
 
 		dcdc3_reg: regulator@2 {
-			reg = <2>;
 			/* VDD_CORE voltage limits 0.95V - 1.1V with +/-4% tolerance */
 			regulator-name = "vdd_core";
 			regulator-min-microvolt = <925000>;
@@ -162,28 +156,24 @@ dcdc3_reg: regulator@2 {
 		};
 
 		ldo1_reg: regulator@3 {
-			reg = <3>;
 			regulator-name = "vio,vrtc,vdds";
 			regulator-boot-on;
 			regulator-always-on;
 		};
 
 		ldo2_reg: regulator@4 {
-			reg = <4>;
 			regulator-name = "vdd_3v3aux";
 			regulator-boot-on;
 			regulator-always-on;
 		};
 
 		ldo3_reg: regulator@5 {
-			reg = <5>;
 			regulator-name = "vdd_1v8";
 			regulator-boot-on;
 			regulator-always-on;
 		};
 
 		ldo4_reg: regulator@6 {
-			reg = <6>;
 			regulator-name = "vdd_3v3d";
 			regulator-boot-on;
 			regulator-always-on;

arch/arm/boot/dts/am335x-nano.dts

@@ -375,15 +375,11 @@ &mmc1 {
 	wp-gpios = <&gpio3 18 0>;
 };
 
-&tps {
-	compatible = "ti,tps65217";
+#include "tps65217.dtsi"
 
+&tps {
 	regulators {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
 		dcdc1_reg: regulator@0 {
-			reg = <0>;
 			/* +1.5V voltage with ±4% tolerance */
 			regulator-min-microvolt = <1450000>;
 			regulator-max-microvolt = <1550000>;
@@ -392,7 +388,6 @@ dcdc1_reg: regulator@0 {
 		};
 
 		dcdc2_reg: regulator@1 {
-			reg = <1>;
 			/* VDD_MPU voltage limits 0.95V - 1.1V with ±4% tolerance */
 			regulator-name = "vdd_mpu";
 			regulator-min-microvolt = <915000>;
@@ -402,7 +397,6 @@ dcdc2_reg: regulator@1 {
 		};
 
 		dcdc3_reg: regulator@2 {
-			reg = <2>;
 			/* VDD_CORE voltage limits 0.95V - 1.1V with ±4% tolerance */
 			regulator-name = "vdd_core";
 			regulator-min-microvolt = <915000>;
@@ -412,7 +406,6 @@ dcdc3_reg: regulator@2 {
 		};
 
 		ldo1_reg: regulator@3 {
-			reg = <3>;
 			/* +1.8V voltage with ±4% tolerance */
 			regulator-min-microvolt = <1750000>;
 			regulator-max-microvolt = <1870000>;
@@ -421,7 +414,6 @@ ldo1_reg: regulator@3 {
 		};
 
 		ldo2_reg: regulator@4 {
-			reg = <4>;
 			/* +3.3V voltage with ±4% tolerance */
 			regulator-min-microvolt = <3175000>;
 			regulator-max-microvolt = <3430000>;
@@ -430,7 +422,6 @@ ldo2_reg: regulator@4 {
 		};
 
 		ldo3_reg: regulator@5 {
-			reg = <5>;
 			/* +1.8V voltage with ±4% tolerance */
 			regulator-min-microvolt = <1750000>;
 			regulator-max-microvolt = <1870000>;
@@ -439,7 +430,6 @@ ldo3_reg: regulator@5 {
 		};
 
 		ldo4_reg: regulator@6 {
-			reg = <6>;
 			/* +3.3V voltage with ±4% tolerance */
 			regulator-min-microvolt = <3175000>;
 			regulator-max-microvolt = <3430000>;

arch/arm/boot/dts/am335x-pepper.dts

@@ -420,9 +420,9 @@ &vdd5_reg {
 	vin-supply = <&vbat>;
 };
 
-&tps {
-	compatible = "ti,tps65217";
+/include/ "tps65217.dtsi"
 
+&tps {
 	backlight {
 		isel = <1>; /* ISET1 */
 		fdim = <200>; /* TPS65217_BL_FDIM_200HZ */
@@ -430,17 +430,12 @@ backlight {
 	};
 
 	regulators {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
 		dcdc1_reg: regulator@0 {
-			reg = <0>;
 			/* VDD_1V8 system supply */
 			regulator-always-on;
 		};
 
 		dcdc2_reg: regulator@1 {
-			reg = <1>;
 			/* VDD_CORE voltage limits 0.95V - 1.26V with +/-4% tolerance */
 			regulator-name = "vdd_core";
 			regulator-min-microvolt = <925000>;
@@ -450,7 +445,6 @@ dcdc2_reg: regulator@1 {
 		};
 
 		dcdc3_reg: regulator@2 {
-			reg = <2>;
 			/* VDD_MPU voltage limits 0.95V - 1.1V with +/-4% tolerance */
 			regulator-name = "vdd_mpu";
 			regulator-min-microvolt = <925000>;
@@ -460,21 +454,18 @@ dcdc3_reg: regulator@2 {
 		};
 
 		ldo1_reg: regulator@3 {
-			reg = <3>;
 			/* VRTC 1.8V always-on supply */
 			regulator-name = "vrtc,vdds";
 			regulator-always-on;
 		};
 
 		ldo2_reg: regulator@4 {
-			reg = <4>;
 			/* 3.3V rail */
 			regulator-name = "vdd_3v3aux";
 			regulator-always-on;
 		};
 
 		ldo3_reg: regulator@5 {
-			reg = <5>;
 			/* VDD_3V3A 3.3V rail */
 			regulator-name = "vdd_3v3a";
 			regulator-min-microvolt = <3300000>;
@@ -482,7 +473,6 @@ ldo3_reg: regulator@5 {
 		};
 
 		ldo4_reg: regulator@6 {
-			reg = <6>;
 			/* VDD_3V3B 3.3V rail */
 			regulator-name = "vdd_3v3b";
 			regulator-always-on;

arch/arm/boot/dts/am335x-shc.dts

@@ -46,7 +46,7 @@ back_button {
 			gpios = <&gpio1 29 GPIO_ACTIVE_HIGH>;
 			linux,code = <KEY_BACK>;
 			debounce-interval = <1000>;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 
 		front_button {
@@ -54,7 +54,7 @@ front_button {
 			gpios = <&gpio1 25 GPIO_ACTIVE_HIGH>;
 			linux,code = <KEY_FRONT>;
 			debounce-interval = <1000>;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 	};
 

arch/arm/boot/dts/am335x-sl50.dts

@@ -375,19 +375,16 @@ &uart4 {
 	pinctrl-0 = <&uart4_pins>;
 };
 
+#include "tps65217.dtsi"
+
 &tps {
-	compatible = "ti,tps65217";
 	ti,pmic-shutdown-controller;
 
 	interrupt-parent = <&intc>;
 	interrupts = <7>;	/* NNMI */
 
 	regulators {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
 		dcdc1_reg: regulator@0 {
-			reg = <0>;
 			/* VDDS_DDR */
 			regulator-min-microvolt = <1500000>;
 			regulator-max-microvolt = <1500000>;
@@ -395,7 +392,6 @@ dcdc1_reg: regulator@0 {
 		};
 
 		dcdc2_reg: regulator@1 {
-			reg = <1>;
 			/* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */
 			regulator-name = "vdd_mpu";
 			regulator-min-microvolt = <925000>;
@@ -405,7 +401,6 @@ dcdc2_reg: regulator@1 {
 		};
 
 		dcdc3_reg: regulator@2 {
-			reg = <2>;
 			/* VDD_CORE voltage limits 0.95V - 1.1V with +/-4% tolerance */
 			regulator-name = "vdd_core";
 			regulator-min-microvolt = <925000>;
@@ -415,7 +410,6 @@ dcdc3_reg: regulator@2 {
 		};
 
 		ldo1_reg: regulator@3 {
-			reg = <3>;
 			/* VRTC / VIO / VDDS*/
 			regulator-always-on;
 			regulator-min-microvolt = <1800000>;
@@ -423,7 +417,6 @@ ldo1_reg: regulator@3 {
 		};
 
 		ldo2_reg: regulator@4 {
-			reg = <4>;
 			/* VDD_3V3AUX */
 			regulator-always-on;
 			regulator-min-microvolt = <3300000>;
@@ -431,7 +424,6 @@ ldo2_reg: regulator@4 {
 		};
 
 		ldo3_reg: regulator@5 {
-			reg = <5>;
 			/* VDD_1V8 */
 			regulator-min-microvolt = <1800000>;
 			regulator-max-microvolt = <1800000>;
@@ -439,7 +431,6 @@ ldo3_reg: regulator@5 {
 		};
 
 		ldo4_reg: regulator@6 {
-			reg = <6>;
 			/* VDD_3V3A */
 			regulator-min-microvolt = <3300000>;
 			regulator-max-microvolt = <3300000>;

arch/arm/boot/dts/am57xx-beagle-x15.dts

@@ -173,6 +173,8 @@ simple-audio-card,cpu {
 
 		sound0_master: simple-audio-card,codec {
 			sound-dai = <&tlv320aic3104>;
+			assigned-clocks = <&clkoutmux2_clk_mux>;
+			assigned-clock-parents = <&sys_clk2_dclk_div>;
 			clocks = <&clkout2_clk>;
 		};
 	};
@@ -796,6 +798,8 @@ &mcasp3 {
 	pinctrl-names = "default", "sleep";
 	pinctrl-0 = <&mcasp3_pins_default>;
 	pinctrl-1 = <&mcasp3_pins_sleep>;
+	assigned-clocks = <&mcasp3_ahclkx_mux>;
+	assigned-clock-parents = <&sys_clkin2>;
 	status = "okay";
 
 	op-mode = <0>;	/* MCASP_IIS_MODE */

arch/arm/boot/dts/am57xx-cl-som-am57x.dts

@@ -545,7 +545,7 @@ ads7846@0 {
 		ti,debounce-tol = /bits/ 16 <10>;
 		ti,debounce-rep = /bits/ 16 <1>;
 
-		linux,wakeup;
+		wakeup-source;
 	};
 };
 

arch/arm/boot/dts/imx6qdl.dtsi

@@ -896,7 +896,6 @@ crypto: caam@2100000 {
 				#size-cells = <1>;
 				reg = <0x2100000 0x10000>;
 				ranges = <0 0x2100000 0x10000>;
-				interrupt-parent = <&intc>;
 				clocks = <&clks IMX6QDL_CLK_CAAM_MEM>,
 					 <&clks IMX6QDL_CLK_CAAM_ACLK>,
 					 <&clks IMX6QDL_CLK_CAAM_IPG>,

arch/arm/boot/dts/kirkwood-ds112.dts

@@ -14,7 +14,7 @@
 #include "kirkwood-synology.dtsi"
 
 / {
-	model = "Synology DS111";
+	model = "Synology DS112";
 	compatible = "synology,ds111", "marvell,kirkwood";
 
 	memory {

arch/arm/boot/dts/orion5x-linkstation-lswtgl.dts

@@ -228,6 +228,37 @@ hdd_power: regulator@2 {
 	};
 };
 
+&devbus_bootcs {
+	status = "okay";
+	devbus,keep-config;
+
+	flash@0 {
+		compatible = "jedec-flash";
+		reg = <0 0x40000>;
+		bank-width = <1>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			header@0 {
+				reg = <0 0x30000>;
+				read-only;
+			};
+
+			uboot@30000 {
+				reg = <0x30000 0xF000>;
+				read-only;
+			};
+
+			uboot_env@3F000 {
+				reg = <0x3F000 0x1000>;
+			};
+		};
+	};
+};
+
 &mdio {
 	status = "okay";
 

arch/arm/boot/dts/sama5d2-pinfunc.h

@@ -90,7 +90,7 @@
 #define PIN_PA14__I2SC1_MCK		PINMUX_PIN(PIN_PA14, 4, 2)
 #define PIN_PA14__FLEXCOM3_IO2		PINMUX_PIN(PIN_PA14, 5, 1)
 #define PIN_PA14__D9			PINMUX_PIN(PIN_PA14, 6, 2)
-#define PIN_PA15			14
+#define PIN_PA15			15
 #define PIN_PA15__GPIO			PINMUX_PIN(PIN_PA15, 0, 0)
 #define PIN_PA15__SPI0_MOSI		PINMUX_PIN(PIN_PA15, 1, 1)
 #define PIN_PA15__TF1			PINMUX_PIN(PIN_PA15, 2, 1)

arch/arm/boot/dts/tps65217.dtsi

+/*
+ * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/*
+ * Integrated Power Management Chip
+ * http://www.ti.com/lit/ds/symlink/tps65217.pdf
+ */
+
+&tps {
+	compatible = "ti,tps65217";
+
+	regulators {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		dcdc1_reg: regulator@0 {
+			reg = <0>;
+			regulator-compatible = "dcdc1";
+		};
+
+		dcdc2_reg: regulator@1 {
+			reg = <1>;
+			regulator-compatible = "dcdc2";
+		};
+
+		dcdc3_reg: regulator@2 {
+			reg = <2>;
+			regulator-compatible = "dcdc3";
+		};
+
+		ldo1_reg: regulator@3 {
+			reg = <3>;
+			regulator-compatible = "ldo1";
+		};
+
+		ldo2_reg: regulator@4 {
+			reg = <4>;
+			regulator-compatible = "ldo2";
+		};
+
+		ldo3_reg: regulator@5 {
+			reg = <5>;
+			regulator-compatible = "ldo3";
+		};
+
+		ldo4_reg: regulator@6 {
+			reg = <6>;
+			regulator-compatible = "ldo4";
+		};
+	};
+};

arch/arm/mach-omap2/board-generic.c

@@ -18,6 +18,7 @@
 
 #include <asm/setup.h>
 #include <asm/mach/arch.h>
+#include <asm/system_info.h>
 
 #include "common.h"
 
@@ -77,12 +78,31 @@ static const char *const n900_boards_compat[] __initconst = {
 	NULL,
 };
 
+/* Set system_rev from atags */
+static void __init rx51_set_system_rev(const struct tag *tags)
+{
+	const struct tag *tag;
+
+	if (tags->hdr.tag != ATAG_CORE)
+		return;
+
+	for_each_tag(tag, tags) {
+		if (tag->hdr.tag == ATAG_REVISION) {
+			system_rev = tag->u.revision.rev;
+			break;
+		}
+	}
+}
+
 /* Legacy userspace on Nokia N900 needs ATAGS exported in /proc/atags,
  * save them while the data is still not overwritten
  */
 static void __init rx51_reserve(void)
 {
-	save_atags((const struct tag *)(PAGE_OFFSET + 0x100));
+	const struct tag *tags = (const struct tag *)(PAGE_OFFSET + 0x100);
+
+	save_atags(tags);
+	rx51_set_system_rev(tags);
 	omap_reserve();
 }
 

arch/arm/mach-omap2/gpmc-onenand.c

@@ -101,10 +101,8 @@ static void omap2_onenand_set_async_mode(void __iomem *onenand_base)
 
 static void set_onenand_cfg(void __iomem *onenand_base)
 {
-	u32 reg;
+	u32 reg = ONENAND_SYS_CFG1_RDY | ONENAND_SYS_CFG1_INT;
 
-	reg = readw(onenand_base + ONENAND_REG_SYS_CFG1);
-	reg &= ~((0x7 << ONENAND_SYS_CFG1_BRL_SHIFT) | (0x7 << 9));
 	reg |=	(latency << ONENAND_SYS_CFG1_BRL_SHIFT) |
 		ONENAND_SYS_CFG1_BL_16;
 	if (onenand_flags & ONENAND_FLAG_SYNCREAD)
@@ -123,6 +121,7 @@ static void set_onenand_cfg(void __iomem *onenand_base)
 		reg |= ONENAND_SYS_CFG1_VHF;
 	else
 		reg &= ~ONENAND_SYS_CFG1_VHF;
+
 	writew(reg, onenand_base + ONENAND_REG_SYS_CFG1);
 }
 
@@ -289,6 +288,7 @@ static int omap2_onenand_setup_async(void __iomem *onenand_base)
 		}
 	}
 
+	onenand_async.sync_write = true;
 	omap2_onenand_calc_async_timings(&t);
 
 	ret = gpmc_cs_program_settings(gpmc_onenand_data->cs, &onenand_async);

arch/arm/mach-omap2/omap_device.c

@@ -191,12 +191,22 @@ static int _omap_device_notifier_call(struct notifier_block *nb,
 {
 	struct platform_device *pdev = to_platform_device(dev);
 	struct omap_device *od;
+	int err;
 
 	switch (event) {
 	case BUS_NOTIFY_DEL_DEVICE:
 		if (pdev->archdata.od)
 			omap_device_delete(pdev->archdata.od);
 		break;
+	case BUS_NOTIFY_UNBOUND_DRIVER:
+		od = to_omap_device(pdev);
+		if (od && (od->_state == OMAP_DEVICE_STATE_ENABLED)) {
+			dev_info(dev, "enabled after unload, idling\n");
+			err = omap_device_idle(pdev);
+			if (err)
+				dev_err(dev, "failed to idle\n");
+		}
+		break;
 	case BUS_NOTIFY_ADD_DEVICE:
 		if (pdev->dev.of_node)
 			omap_device_build_from_dt(pdev);
@@ -602,8 +612,10 @@ static int _od_runtime_resume(struct device *dev)
 	int ret;
 
 	ret = omap_device_enable(pdev);
-	if (ret)
+	if (ret) {
+		dev_err(dev, "use pm_runtime_put_sync_suspend() in driver?\n");
 		return ret;
+	}
 
 	return pm_generic_runtime_resume(dev);
 }

arch/arm/mach-shmobile/common.h

@@ -4,7 +4,6 @@
 extern void shmobile_init_delay(void);
 extern void shmobile_boot_vector(void);
 extern unsigned long shmobile_boot_fn;
-extern unsigned long shmobile_boot_arg;
 extern unsigned long shmobile_boot_size;
 extern void shmobile_smp_boot(void);
 extern void shmobile_smp_sleep(void);

arch/arm/mach-shmobile/headsmp-scu.S

@@ -38,9 +38,3 @@ ENTRY(shmobile_boot_scu)
 
 	b	secondary_startup
 ENDPROC(shmobile_boot_scu)
-
-	.text
-	.align	2
-	.globl	shmobile_scu_base
-shmobile_scu_base:
-	.space	4

arch/arm/mach-shmobile/headsmp.S

@@ -24,7 +24,6 @@
 	.arm
 	.align  12
 ENTRY(shmobile_boot_vector)
-	ldr     r0, 2f
 	ldr     r1, 1f
 	bx	r1
 
@@ -34,9 +33,6 @@ ENDPROC(shmobile_boot_vector)
 	.globl	shmobile_boot_fn
 shmobile_boot_fn:
 1:	.space	4
-	.globl	shmobile_boot_arg
-shmobile_boot_arg:
-2:	.space	4
 	.globl	shmobile_boot_size
 shmobile_boot_size:
 	.long	. - shmobile_boot_vector
@@ -46,13 +42,15 @@ shmobile_boot_size:
  */
 
 ENTRY(shmobile_smp_boot)
-						@ r0 = MPIDR_HWID_BITMASK
 	mrc	p15, 0, r1, c0, c0, 5		@ r1 = MPIDR
-	and	r0, r1, r0			@ r0 = cpu_logical_map() value
+	and	r0, r1, #0xffffff		@ MPIDR_HWID_BITMASK
+						@ r0 = cpu_logical_map() value
 	mov	r1, #0				@ r1 = CPU index
-	adr	r5, 1f				@ array of per-cpu mpidr values
-	adr	r6, 2f				@ array of per-cpu functions
-	adr	r7, 3f				@ array of per-cpu arguments
+	adr	r2, 1f
+	ldmia	r2, {r5, r6, r7}
+	add	r5, r5, r2			@ array of per-cpu mpidr values
+	add	r6, r6, r2			@ array of per-cpu functions
+	add	r7, r7, r2			@ array of per-cpu arguments
 
 shmobile_smp_boot_find_mpidr:
 	ldr	r8, [r5, r1, lsl #2]
@@ -80,12 +78,18 @@ ENTRY(shmobile_smp_sleep)
 	b	shmobile_smp_boot
 ENDPROC(shmobile_smp_sleep)
 
+	.align	2
+1:	.long	shmobile_smp_mpidr - .
+	.long	shmobile_smp_fn - 1b
+	.long	shmobile_smp_arg - 1b
+
+	.bss
 	.globl	shmobile_smp_mpidr
 shmobile_smp_mpidr:
-1:	.space	NR_CPUS * 4
+	.space	NR_CPUS * 4
 	.globl	shmobile_smp_fn
 shmobile_smp_fn:
-2:	.space	NR_CPUS * 4
+	.space	NR_CPUS * 4
 	.globl	shmobile_smp_arg
 shmobile_smp_arg:
-3:	.space	NR_CPUS * 4
+	.space	NR_CPUS * 4

arch/arm/mach-shmobile/platsmp-apmu.c

@@ -123,7 +123,6 @@ void __init shmobile_smp_apmu_prepare_cpus(unsigned int max_cpus,
 {
 	/* install boot code shared by all CPUs */
 	shmobile_boot_fn = virt_to_phys(shmobile_smp_boot);
-	shmobile_boot_arg = MPIDR_HWID_BITMASK;
 
 	/* perform per-cpu setup */
 	apmu_parse_cfg(apmu_init_cpu, apmu_config, num);

arch/arm/mach-shmobile/platsmp-scu.c

@@ -17,6 +17,9 @@
 #include <asm/smp_scu.h>
 #include "common.h"
 
+
+void __iomem *shmobile_scu_base;
+
 static int shmobile_smp_scu_notifier_call(struct notifier_block *nfb,
 					  unsigned long action, void *hcpu)
 {
@@ -41,7 +44,6 @@ void __init shmobile_smp_scu_prepare_cpus(unsigned int max_cpus)
 {
 	/* install boot code shared by all CPUs */
 	shmobile_boot_fn = virt_to_phys(shmobile_smp_boot);
-	shmobile_boot_arg = MPIDR_HWID_BITMASK;
 
 	/* enable SCU and cache coherency on booting CPU */
 	scu_enable(shmobile_scu_base);

arch/arm/mach-shmobile/smp-r8a7779.c

@@ -92,8 +92,6 @@ static void __init r8a7779_smp_prepare_cpus(unsigned int max_cpus)
 {
 	/* Map the reset vector (in headsmp-scu.S, headsmp.S) */
 	__raw_writel(__pa(shmobile_boot_vector), AVECR);
-	shmobile_boot_fn = virt_to_phys(shmobile_boot_scu);
-	shmobile_boot_arg = (unsigned long)shmobile_scu_base;
 
 	/* setup r8a7779 specific SCU bits */
 	shmobile_scu_base = IOMEM(R8A7779_SCU_BASE);