Commit 342149c5 authored by David S. Miller's avatar David S. Miller

Merge branch 'for-upstream' of...

Merge branch 'for-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next

Johan Hedberg says:

====================
pull request: bluetooth-next 2018-10-20

Here's one more bluetooth-next pull request for the 4.20 kernel.

 - Added new USB ID for QCA_ROME controller
 - Added debug trace support from QCA wcn3990 controllers
 - Updated L2CAP to conform to latest Errata Service Release
 - Fix binding to non-removable BCM43430 devices

Please let me know if there are any issues pulling. Thanks.
====================
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parents a4efbaf6 c614ca3f
......@@ -293,13 +293,17 @@ static int btsdio_probe(struct sdio_func *func,
tuple = tuple->next;
}
/* BCM43341 devices soldered onto the PCB (non-removable) use an
* uart connection for bluetooth, ignore the BT SDIO interface.
/* Broadcom devices soldered onto the PCB (non-removable) use an
* UART connection for Bluetooth, ignore the BT SDIO interface.
*/
if (func->vendor == SDIO_VENDOR_ID_BROADCOM &&
func->device == SDIO_DEVICE_ID_BROADCOM_43341 &&
!mmc_card_is_removable(func->card->host))
!mmc_card_is_removable(func->card->host)) {
switch (func->device) {
case SDIO_DEVICE_ID_BROADCOM_43341:
case SDIO_DEVICE_ID_BROADCOM_43430:
return -ENODEV;
}
}
data = devm_kzalloc(&func->dev, sizeof(*data), GFP_KERNEL);
if (!data)
......
......@@ -264,6 +264,7 @@ static const struct usb_device_id blacklist_table[] = {
{ USB_DEVICE(0x0489, 0xe03c), .driver_info = BTUSB_ATH3012 },
/* QCA ROME chipset */
{ USB_DEVICE(0x0cf3, 0x535b), .driver_info = BTUSB_QCA_ROME },
{ USB_DEVICE(0x0cf3, 0xe007), .driver_info = BTUSB_QCA_ROME },
{ USB_DEVICE(0x0cf3, 0xe009), .driver_info = BTUSB_QCA_ROME },
{ USB_DEVICE(0x0cf3, 0xe010), .driver_info = BTUSB_QCA_ROME },
......
......@@ -40,6 +40,7 @@
#include <linux/platform_device.h>
#include <linux/regulator/consumer.h>
#include <linux/serdev.h>
#include <asm/unaligned.h>
#include <net/bluetooth/bluetooth.h>
#include <net/bluetooth/hci_core.h>
......@@ -63,6 +64,9 @@
/* susclk rate */
#define SUSCLK_RATE_32KHZ 32768
/* Controller debug log header */
#define QCA_DEBUG_HANDLE 0x2EDC
/* HCI_IBS transmit side sleep protocol states */
enum tx_ibs_states {
HCI_IBS_TX_ASLEEP,
......@@ -849,6 +853,19 @@ static int qca_ibs_wake_ack(struct hci_dev *hdev, struct sk_buff *skb)
return 0;
}
static int qca_recv_acl_data(struct hci_dev *hdev, struct sk_buff *skb)
{
/* We receive debug logs from chip as an ACL packets.
* Instead of sending the data to ACL to decode the
* received data, we are pushing them to the above layers
* as a diagnostic packet.
*/
if (get_unaligned_le16(skb->data) == QCA_DEBUG_HANDLE)
return hci_recv_diag(hdev, skb);
return hci_recv_frame(hdev, skb);
}
#define QCA_IBS_SLEEP_IND_EVENT \
.type = HCI_IBS_SLEEP_IND, \
.hlen = 0, \
......@@ -871,7 +888,7 @@ static int qca_ibs_wake_ack(struct hci_dev *hdev, struct sk_buff *skb)
.maxlen = HCI_MAX_IBS_SIZE
static const struct h4_recv_pkt qca_recv_pkts[] = {
{ H4_RECV_ACL, .recv = hci_recv_frame },
{ H4_RECV_ACL, .recv = qca_recv_acl_data },
{ H4_RECV_SCO, .recv = hci_recv_frame },
{ H4_RECV_EVENT, .recv = hci_recv_frame },
{ QCA_IBS_WAKE_IND_EVENT, .recv = qca_ibs_wake_ind },
......
......@@ -277,12 +277,19 @@ struct l2cap_conn_rsp {
#define L2CAP_CR_SEC_BLOCK 0x0003
#define L2CAP_CR_NO_MEM 0x0004
#define L2CAP_CR_BAD_AMP 0x0005
#define L2CAP_CR_AUTHENTICATION 0x0005
#define L2CAP_CR_AUTHORIZATION 0x0006
#define L2CAP_CR_BAD_KEY_SIZE 0x0007
#define L2CAP_CR_ENCRYPTION 0x0008
#define L2CAP_CR_INVALID_SCID 0x0009
#define L2CAP_CR_SCID_IN_USE 0x000A
#define L2CAP_CR_INVALID_SCID 0x0006
#define L2CAP_CR_SCID_IN_USE 0x0007
/* credit based connect results */
#define L2CAP_CR_LE_SUCCESS 0x0000
#define L2CAP_CR_LE_BAD_PSM 0x0002
#define L2CAP_CR_LE_NO_MEM 0x0004
#define L2CAP_CR_LE_AUTHENTICATION 0x0005
#define L2CAP_CR_LE_AUTHORIZATION 0x0006
#define L2CAP_CR_LE_BAD_KEY_SIZE 0x0007
#define L2CAP_CR_LE_ENCRYPTION 0x0008
#define L2CAP_CR_LE_INVALID_SCID 0x0009
#define L2CAP_CR_LE_SCID_IN_USE 0X000A
/* connect/create channel status */
#define L2CAP_CS_NO_INFO 0x0000
......
......@@ -4937,7 +4937,6 @@ static void le_conn_complete_evt(struct hci_dev *hdev, u8 status,
hci_debugfs_create_conn(conn);
hci_conn_add_sysfs(conn);
if (!status) {
/* The remote features procedure is defined for master
* role only. So only in case of an initiated connection
* request the remote features.
......@@ -4961,9 +4960,6 @@ static void le_conn_complete_evt(struct hci_dev *hdev, u8 status,
conn->state = BT_CONNECTED;
hci_connect_cfm(conn, status);
}
} else {
hci_connect_cfm(conn, status);
}
params = hci_pend_le_action_lookup(&hdev->pend_le_conns, &conn->dst,
conn->dst_type);
......
......@@ -680,9 +680,9 @@ static void l2cap_chan_le_connect_reject(struct l2cap_chan *chan)
u16 result;
if (test_bit(FLAG_DEFER_SETUP, &chan->flags))
result = L2CAP_CR_AUTHORIZATION;
result = L2CAP_CR_LE_AUTHORIZATION;
else
result = L2CAP_CR_BAD_PSM;
result = L2CAP_CR_LE_BAD_PSM;
l2cap_state_change(chan, BT_DISCONN);
......@@ -3670,7 +3670,7 @@ void __l2cap_le_connect_rsp_defer(struct l2cap_chan *chan)
rsp.mtu = cpu_to_le16(chan->imtu);
rsp.mps = cpu_to_le16(chan->mps);
rsp.credits = cpu_to_le16(chan->rx_credits);
rsp.result = cpu_to_le16(L2CAP_CR_SUCCESS);
rsp.result = cpu_to_le16(L2CAP_CR_LE_SUCCESS);
l2cap_send_cmd(conn, chan->ident, L2CAP_LE_CONN_RSP, sizeof(rsp),
&rsp);
......@@ -3816,9 +3816,17 @@ static struct l2cap_chan *l2cap_connect(struct l2cap_conn *conn,
result = L2CAP_CR_NO_MEM;
/* Check for valid dynamic CID range (as per Erratum 3253) */
if (scid < L2CAP_CID_DYN_START || scid > L2CAP_CID_DYN_END) {
result = L2CAP_CR_INVALID_SCID;
goto response;
}
/* Check if we already have channel with that dcid */
if (__l2cap_get_chan_by_dcid(conn, scid))
if (__l2cap_get_chan_by_dcid(conn, scid)) {
result = L2CAP_CR_SCID_IN_USE;
goto response;
}
chan = pchan->ops->new_connection(pchan);
if (!chan)
......@@ -5280,7 +5288,7 @@ static int l2cap_le_connect_rsp(struct l2cap_conn *conn,
credits = __le16_to_cpu(rsp->credits);
result = __le16_to_cpu(rsp->result);
if (result == L2CAP_CR_SUCCESS && (mtu < 23 || mps < 23 ||
if (result == L2CAP_CR_LE_SUCCESS && (mtu < 23 || mps < 23 ||
dcid < L2CAP_CID_DYN_START ||
dcid > L2CAP_CID_LE_DYN_END))
return -EPROTO;
......@@ -5301,7 +5309,7 @@ static int l2cap_le_connect_rsp(struct l2cap_conn *conn,
l2cap_chan_lock(chan);
switch (result) {
case L2CAP_CR_SUCCESS:
case L2CAP_CR_LE_SUCCESS:
if (__l2cap_get_chan_by_dcid(conn, dcid)) {
err = -EBADSLT;
break;
......@@ -5315,8 +5323,8 @@ static int l2cap_le_connect_rsp(struct l2cap_conn *conn,
l2cap_chan_ready(chan);
break;
case L2CAP_CR_AUTHENTICATION:
case L2CAP_CR_ENCRYPTION:
case L2CAP_CR_LE_AUTHENTICATION:
case L2CAP_CR_LE_ENCRYPTION:
/* If we already have MITM protection we can't do
* anything.
*/
......@@ -5459,7 +5467,7 @@ static int l2cap_le_connect_req(struct l2cap_conn *conn,
pchan = l2cap_global_chan_by_psm(BT_LISTEN, psm, &conn->hcon->src,
&conn->hcon->dst, LE_LINK);
if (!pchan) {
result = L2CAP_CR_BAD_PSM;
result = L2CAP_CR_LE_BAD_PSM;
chan = NULL;
goto response;
}
......@@ -5469,28 +5477,28 @@ static int l2cap_le_connect_req(struct l2cap_conn *conn,
if (!smp_sufficient_security(conn->hcon, pchan->sec_level,
SMP_ALLOW_STK)) {
result = L2CAP_CR_AUTHENTICATION;
result = L2CAP_CR_LE_AUTHENTICATION;
chan = NULL;
goto response_unlock;
}
/* Check for valid dynamic CID range */
if (scid < L2CAP_CID_DYN_START || scid > L2CAP_CID_LE_DYN_END) {
result = L2CAP_CR_INVALID_SCID;
result = L2CAP_CR_LE_INVALID_SCID;
chan = NULL;
goto response_unlock;
}
/* Check if we already have channel with that dcid */
if (__l2cap_get_chan_by_dcid(conn, scid)) {
result = L2CAP_CR_SCID_IN_USE;
result = L2CAP_CR_LE_SCID_IN_USE;
chan = NULL;
goto response_unlock;
}
chan = pchan->ops->new_connection(pchan);
if (!chan) {
result = L2CAP_CR_NO_MEM;
result = L2CAP_CR_LE_NO_MEM;
goto response_unlock;
}
......@@ -5526,7 +5534,7 @@ static int l2cap_le_connect_req(struct l2cap_conn *conn,
chan->ops->defer(chan);
} else {
l2cap_chan_ready(chan);
result = L2CAP_CR_SUCCESS;
result = L2CAP_CR_LE_SUCCESS;
}
response_unlock:
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment