Skip to content

L
linux
Commit 34b2137e authored by Matthew Wilcox's avatar Matthew Wilcox Committed by Linus Torvalds
Browse files
Options

[PATCH] Make SCSI selfcontained 

Move all the SCSI Kconfig bits from arch/*/Kconfig into driver/scsi/Kconfig.
Also add notes about FireWire & USB.
parent da134d6a
Show whitespace changes
Inline Side-by-side
Showing with 34 additions and 412 deletions
arch/alpha/Kconfig
View file @ 34b2137e
......@@ -665,33 +665,8 @@ source "drivers/md/Kconfig"
source "drivers/ide/Kconfig"
menu "SCSI support"
config SCSI
tristate "SCSI support"
---help---
If you want to use a SCSI hard disk, SCSI tape drive, SCSI CD-ROM or
any other SCSI device under Linux, say Y and make sure that you know
the name of your SCSI host adapter (the card inside your computer
that "speaks" the SCSI protocol, also called SCSI controller),
because you will be asked for it.
You also need to say Y here if you want support for the parallel
port version of the 100 MB IOMEGA ZIP drive.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called scsi_mod. If you want to compile it as
a module, say M here and read <file:Documentation/modules.txt> and
<file:Documentation/scsi/scsi.txt>. However, do not compile this as a
module if your root file system (the one containing the directory /)
is located on a SCSI device.
source "drivers/scsi/Kconfig"
endmenu
if PCI
source "drivers/message/fusion/Kconfig"
endif
......
arch/arm/Kconfig
View file @ 34b2137e
......@@ -898,33 +898,8 @@ source "net/ax25/Kconfig"
source "drivers/ide/Kconfig"
menu "SCSI support"
config SCSI
tristate "SCSI support"
---help---
If you want to use a SCSI hard disk, SCSI tape drive, SCSI CD-ROM or
any other SCSI device under Linux, say Y and make sure that you know
the name of your SCSI host adapter (the card inside your computer
that "speaks" the SCSI protocol, also called SCSI controller),
because you will be asked for it.
You also need to say Y here if you want support for the parallel
port version of the 100 MB IOMEGA ZIP drive.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called scsi_mod. If you want to compile it as
a module, say M here and read <file:Documentation/modules.txt> and
<file:Documentation/scsi/scsi.txt>. However, do not compile this as a
module if your root file system (the one containing the directory /)
is located on a SCSI device.
source "drivers/scsi/Kconfig"
endmenu
source "drivers/ieee1394/Kconfig"
source "drivers/message/i2o/Kconfig"
......
arch/arm26/Kconfig
View file @ 34b2137e
......@@ -364,32 +364,8 @@ source "drivers/ide/Kconfig"
endmenu
menu "SCSI support"
config SCSI
tristate "SCSI support"
---help---
If you want to use a SCSI hard disk, SCSI tape drive, SCSI CD-ROM or
any other SCSI device under Linux, say Y and make sure that you know
the name of your SCSI host adapter (the card inside your computer
that "speaks" the SCSI protocol, also called SCSI controller),
because you will be asked for it.
You also need to say Y here if you want support for the parallel
port version of the 100 MB IOMEGA ZIP drive.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called scsi_mod. If you want to compile it as
a module, say M here and read <file:Documentation/modules.txt> and
<file:Documentation/scsi/scsi.txt>. However, do not compile this as a
module if your root file system (the one containing the directory /)
is located on a SCSI device.
source "drivers/scsi/Kconfig"
endmenu
source "drivers/isdn/Kconfig"
#
......
arch/cris/Kconfig
View file @ 34b2137e
......@@ -533,33 +533,8 @@ source "drivers/md/Kconfig"
source "drivers/ide/Kconfig"
menu "SCSI support"
config SCSI
tristate "SCSI support"
---help---
If you want to use a SCSI hard disk, SCSI tape drive, SCSI CD-ROM or
any other SCSI device under Linux, say Y and make sure that you know
the name of your SCSI host adapter (the card inside your computer
that "speaks" the SCSI protocol, also called SCSI controller),
because you will be asked for it.
You also need to say Y here if you want support for the parallel
port version of the 100 MB IOMEGA ZIP drive.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called scsi_mod. If you want to compile it as
a module, say M here and read <file:Documentation/modules.txt> and
<file:Documentation/scsi/scsi.txt>. However, do not compile this as a
module if your root file system (the one containing the directory /)
is located on a SCSI device.
source "drivers/scsi/Kconfig"
endmenu
source "drivers/ieee1394/Kconfig"
source "drivers/message/i2o/Kconfig"
......
arch/i386/Kconfig
View file @ 34b2137e
......@@ -1206,33 +1206,8 @@ source "drivers/block/Kconfig"
source "drivers/ide/Kconfig"
menu "SCSI device support"
config SCSI
tristate "SCSI device support"
---help---
If you want to use a SCSI hard disk, SCSI tape drive, SCSI CD-ROM or
any other SCSI device under Linux, say Y and make sure that you know
the name of your SCSI host adapter (the card inside your computer
that "speaks" the SCSI protocol, also called SCSI controller),
because you will be asked for it.
You also need to say Y here if you want support for the parallel
port version of the 100 MB IOMEGA ZIP drive.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called scsi_mod. If you want to compile it as
a module, say M here and read <file:Documentation/modules.txt> and
<file:Documentation/scsi/scsi.txt>. However, do not compile this as a
module if your root file system (the one containing the directory /)
is located on a SCSI device.
source "drivers/scsi/Kconfig"
endmenu
menu "Old CD-ROM drivers (not SCSI, not IDE)"
depends on ISA
......
arch/ia64/Kconfig
View file @ 34b2137e
......@@ -557,32 +557,8 @@ source "drivers/message/fusion/Kconfig"
endif
menu "SCSI support"
config SCSI
tristate "SCSI support"
---help---
If you want to use a SCSI hard disk, SCSI tape drive, SCSI CD-ROM or
any other SCSI device under Linux, say Y and make sure that you know
the name of your SCSI host adapter (the card inside your computer
that "speaks" the SCSI protocol, also called SCSI controller),
because you will be asked for it.
You also need to say Y here if you want support for the parallel
port version of the 100 MB IOMEGA ZIP drive.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called scsi_mod. If you want to compile it as
a module, say M here and read <file:Documentation/modules.txt> and
<file:Documentation/scsi/scsi.txt>. However, do not compile this as a
module if your root file system (the one containing the directory /)
is located on a SCSI device.
source "drivers/scsi/Kconfig"
endmenu
source "net/Kconfig"
......
arch/m68k/Kconfig
View file @ 34b2137e
......@@ -585,33 +585,8 @@ source "drivers/input/Kconfig"
source "drivers/ide/Kconfig"
menu "SCSI device support"
config SCSI
tristate "SCSI device support"
---help---
If you want to use a SCSI hard disk, SCSI tape drive, SCSI CD-ROM or
any other SCSI device under Linux, say Y and make sure that you know
the name of your SCSI host adapter (the card inside your computer
that "speaks" the SCSI protocol, also called SCSI controller),
because you will be asked for it.
You also need to say Y here if you want support for the parallel
port version of the 100 MB IOMEGA ZIP drive.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called scsi_mod. If you want to compile it as
a module, say M here and read <file:Documentation/modules.txt> and
<file:Documentation/scsi/scsi.txt>. However, do not compile this as a
module if your root file system (the one containing the directory /)
is located on a SCSI device.
source "drivers/scsi/Kconfig"
endmenu
source "net/Kconfig"
......
arch/m68knommu/Kconfig
View file @ 34b2137e
......@@ -527,22 +527,8 @@ source "drivers/block/Kconfig"
source "drivers/ide/Kconfig"
menu "SCSI device support"
config SCSI
tristate "SCSI device support"
help
If you want to use a SCSI hard disk, SCSI tape drive, SCSI CD-ROM or
any other SCSI device under Linux, say Y and make sure that you know
the name of your SCSI host adapter (the card inside your computer
that "speaks" the SCSI protocol, also called SCSI controller),
because you will be asked for it.
source "drivers/scsi/Kconfig"
endmenu
menu "Old CD-ROM drivers (not SCSI, not IDE)"
depends on ISA
......
arch/mips/Kconfig-shared
View file @ 34b2137e
......@@ -1216,33 +1216,8 @@ endmenu
source "drivers/ide/Kconfig"
menu "SCSI device support"
config SCSI
tristate "SCSI device support"
---help---
If you want to use a SCSI hard disk, SCSI tape drive, SCSI CD-ROM or
any other SCSI device under Linux, say Y and make sure that you know
the name of your SCSI host adapter (the card inside your computer
that "speaks" the SCSI protocol, also called SCSI controller),
because you will be asked for it.
You also need to say Y here if you want support for the parallel
port version of the 100 MB IOMEGA ZIP drive.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called scsi_mod. If you want to compile it as
a module, say M here and read <file:Documentation/modules.txt> and
<file:Documentation/scsi/scsi.txt>. However, do not compile this as a
module if your root file system (the one containing the directory /)
is located on a SCSI device.
source "drivers/scsi/Kconfig"
endmenu
menu "Old CD-ROM drivers (not SCSI, not IDE)"
depends on ISA
......
arch/parisc/Kconfig
View file @ 34b2137e
......@@ -182,33 +182,7 @@ source "drivers/block/Kconfig"
source "drivers/ide/Kconfig"
menu "SCSI support"
config SCSI
tristate "SCSI support"
---help---
If you want to use a SCSI hard disk, SCSI tape drive, SCSI CD-ROM or
any other SCSI device under Linux, say Y and make sure that you know
the name of your SCSI host adapter (the card inside your computer
that "speaks" the SCSI protocol, also called SCSI controller),
because you will be asked for it.
You also need to say Y here if you want support for the parallel
port version of the 100 MB IOMEGA ZIP drive.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called scsi_mod. If you want to compile it as
a module, say M here and read <file:Documentation/modules.txt> and
<file:Documentation/scsi/scsi.txt>. However, do not compile this as a
module if your root file system (the one containing the directory /)
is located on a SCSI device.
source drivers/scsi/Kconfig
endmenu
source "drivers/scsi/Kconfig"
source "drivers/md/Kconfig"
......
arch/ppc/Kconfig
View file @ 34b2137e
......@@ -1175,33 +1175,8 @@ source "drivers/md/Kconfig"
source "drivers/ide/Kconfig"
menu "SCSI support"
config SCSI
tristate "SCSI support"
---help---
If you want to use a SCSI hard disk, SCSI tape drive, SCSI CD-ROM or
any other SCSI device under Linux, say Y and make sure that you know
the name of your SCSI host adapter (the card inside your computer
that "speaks" the SCSI protocol, also called SCSI controller),
because you will be asked for it.
You also need to say Y here if you want support for the parallel
port version of the 100 MB IOMEGA ZIP drive.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called scsi_mod. If you want to compile it as
a module, say M here and read <file:Documentation/modules.txt> and
<file:Documentation/scsi/scsi.txt>. However, do not compile this as a
module if your root file system (the one containing the directory /)
is located on a SCSI device.
source "drivers/scsi/Kconfig"
endmenu
source "drivers/message/fusion/Kconfig"
source "drivers/ieee1394/Kconfig"
......
arch/ppc64/Kconfig
View file @ 34b2137e
......@@ -253,33 +253,8 @@ source "drivers/block/Kconfig"
source "drivers/ide/Kconfig"
menu "SCSI device support"
config SCSI
tristate "SCSI device support"
---help---
If you want to use a SCSI hard disk, SCSI tape drive, SCSI CD-ROM or
any other SCSI device under Linux, say Y and make sure that you know
the name of your SCSI host adapter (the card inside your computer
that "speaks" the SCSI protocol, also called SCSI controller),
because you will be asked for it.
You also need to say Y here if you want support for the parallel
port version of the 100 MB IOMEGA ZIP drive.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called scsi_mod. If you want to compile it as
a module, say M here and read <file:Documentation/modules.txt> and
<file:Documentation/scsi/scsi.txt>. However, do not compile this as a
module if your root file system (the one containing the directory /)
is located on a SCSI device.
source "drivers/scsi/Kconfig"
endmenu
source "drivers/md/Kconfig"
source "drivers/message/fusion/Kconfig"
......
arch/s390/Kconfig
View file @ 34b2137e
......@@ -231,15 +231,8 @@ config PCMCIA
source "drivers/base/Kconfig"
menu "SCSI support"
config SCSI
tristate "SCSI support"
source "drivers/scsi/Kconfig"
endmenu
source "drivers/s390/Kconfig"
source "net/Kconfig"
......
arch/sh/Kconfig
View file @ 34b2137e
......@@ -777,33 +777,8 @@ source "drivers/block/Kconfig"
source "drivers/ide/Kconfig"
menu "SCSI device support"
config SCSI
tristate "SCSI device support"
---help---
If you want to use a SCSI hard disk, SCSI tape drive, SCSI CD-ROM or
any other SCSI device under Linux, say Y and make sure that you know
the name of your SCSI host adapter (the card inside your computer
that "speaks" the SCSI protocol, also called SCSI controller),
because you will be asked for it.
You also need to say Y here if you want support for the parallel
port version of the 100 MB IOMEGA ZIP drive.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called scsi_mod. If you want to compile it as
a module, say M here and read <file:Documentation/modules.txt> and
<file:Documentation/scsi/scsi.txt>. However, do not compile this as a
module if your root file system (the one containing the directory /)
is located on a SCSI device.
source "drivers/scsi/Kconfig"
endmenu
menu "Old CD-ROM drivers (not SCSI, not IDE)"
......
arch/sparc/Kconfig
View file @ 34b2137e
......@@ -481,33 +481,8 @@ endif
source "drivers/isdn/Kconfig"
menu "SCSI support"
config SCSI
tristate "SCSI support"
---help---
If you want to use a SCSI hard disk, SCSI tape drive, SCSI CD-ROM or
any other SCSI device under Linux, say Y and make sure that you know
the name of your SCSI host adapter (the card inside your computer
that "speaks" the SCSI protocol, also called SCSI controller),
because you will be asked for it.
You also need to say Y here if you want support for the parallel
port version of the 100 MB IOMEGA ZIP drive.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called scsi_mod. If you want to compile it as
a module, say M here and read <file:Documentation/modules.txt> and
<file:Documentation/scsi/scsi.txt>. However, do not compile this as a
module if your root file system (the one containing the directory /)
is located on a SCSI device.
source "drivers/scsi/Kconfig"
endmenu
source "drivers/fc4/Kconfig"
source "net/Kconfig"
......
arch/sparc64/Kconfig
View file @ 34b2137e
......@@ -675,33 +675,8 @@ endmenu
source "drivers/ide/Kconfig"
menu "SCSI support"
config SCSI
tristate "SCSI support"
---help---
If you want to use a SCSI hard disk, SCSI tape drive, SCSI CD-ROM or
any other SCSI device under Linux, say Y and make sure that you know
the name of your SCSI host adapter (the card inside your computer
that "speaks" the SCSI protocol, also called SCSI controller),
because you will be asked for it.
You also need to say Y here if you want support for the parallel
port version of the 100 MB IOMEGA ZIP drive.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called scsi_mod. If you want to compile it as
a module, say M here and read <file:Documentation/modules.txt> and
<file:Documentation/scsi/scsi.txt>. However, do not compile this as a
module if your root file system (the one containing the directory /)
is located on a SCSI device.
source "drivers/scsi/Kconfig"
endmenu
source "drivers/fc4/Kconfig"
if PCI
......
arch/v850/Kconfig
View file @ 34b2137e
......@@ -265,15 +265,6 @@ menu "Disk device support"
source "drivers/ide/Kconfig"
config SCSI
tristate "SCSI device support"
help
If you want to use a SCSI hard disk, SCSI tape drive, SCSI CD-ROM or
any other SCSI device under Linux, say Y and make sure that you know
the name of your SCSI host adapter (the card inside your computer
that "speaks" the SCSI protocol, also called SCSI controller),
because you will be asked for it.
source "drivers/scsi/Kconfig"
endmenu
......
arch/x86_64/Kconfig
View file @ 34b2137e
......@@ -407,33 +407,8 @@ source "drivers/block/Kconfig"
source "drivers/ide/Kconfig"
menu "SCSI device support"
config SCSI
tristate "SCSI device support"
---help---
If you want to use a SCSI hard disk, SCSI tape drive, SCSI CD-ROM or
any other SCSI device under Linux, say Y and make sure that you know
the name of your SCSI host adapter (the card inside your computer
that "speaks" the SCSI protocol, also called SCSI controller),
because you will be asked for it.
You also need to say Y here if you want support for the parallel
port version of the 100 MB IOMEGA ZIP drive.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called scsi_mod. If you want to compile it as
a module, say M here and read <file:Documentation/modules.txt> and
<file:Documentation/scsi/scsi.txt>. However, do not compile this as a
module if your root file system (the one containing the directory /)
is located on a SCSI device.
source "drivers/scsi/Kconfig"
endmenu
source "drivers/md/Kconfig"
source "drivers/telephony/Kconfig"
......
drivers/scsi/Kconfig
View file @ 34b2137e
menu "SCSI device support"
config SCSI
tristate "SCSI device support"
---help---
If you want to use a SCSI hard disk, SCSI tape drive, SCSI CD-ROM or
any other SCSI device under Linux, say Y and make sure that you know
the name of your SCSI host adapter (the card inside your computer
that "speaks" the SCSI protocol, also called SCSI controller),
because you will be asked for it.
You also need to say Y here if you have a device which speaks
the SCSI protocol. Examples of this include the parallel port
version of the IOMEGA ZIP drive, USB storage devices, Fibre
Channel, FireWire storage and the IDE-SCSI emulation driver.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called scsi_mod. If you want to compile it as
a module, say M here and read <file:Documentation/modules.txt> and
<file:Documentation/scsi/scsi.txt>. However, do not compile this as a
module if your root file system (the one containing the directory /)
is located on a SCSI device.
comment "SCSI support type (disk, tape, CD-ROM)"
depends on SCSI
......@@ -5,9 +29,10 @@ config BLK_DEV_SD
tristate "SCSI disk support"
depends on SCSI
---help---
If you want to use a SCSI hard disk or the SCSI or parallel port
version of the IOMEGA ZIP drive under Linux, say Y and read the
SCSI-HOWTO, the Disk-HOWTO and the Multi-Disk-HOWTO, available from
If you want to use SCSI hard disks, Fibre Channel disks,
USB storage or the SCSI or parallel port version of
the IOMEGA ZIP drive, say Y and read the SCSI-HOWTO,
the Disk-HOWTO and the Multi-Disk-HOWTO, available from
<http://www.tldp.org/docs.html#howto>. This is NOT for SCSI
CD-ROMs.
......@@ -65,10 +90,10 @@ config BLK_DEV_SR
tristate "SCSI CDROM support"
depends on SCSI
---help---
If you want to use a SCSI CD-ROM under Linux, say Y and read the
SCSI-HOWTO and the CD-ROM-HOWTO at
<http://www.tldp.org/docs.html#howto>. Also make sure to say Y
or M to "ISO 9660 CD-ROM file system support" later.
If you want to use a SCSI or FireWire CD-ROM under Linux,
say Y and read the SCSI-HOWTO and the CDROM-HOWTO at
<http://www.tldp.org/docs.html#howto>. Also make sure to say
Y or M to "ISO 9660 CD-ROM file system support" later.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
......@@ -1823,3 +1848,4 @@ endmenu
source "drivers/scsi/pcmcia/Kconfig"
endmenu
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7