arm64: dts: ti: k3-am642-evm: Enable PCIe and SERDES

AM642 EVM has a x4 lane PCIe connector. Enable PCIe in RC mode here.
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Reviewed-by: Aswath Govindraju <a-govindraju@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Link: https://lore.kernel.org/r/20210603142251.14563-4-kishon@ti.com

arch/arm64/boot/dts/ti/k3-am642-evm.dts

@@ -5,6 +5,8 @@
 
 /dts-v1/;
 
+#include <dt-bindings/phy/phy.h>
+#include <dt-bindings/mux/ti-serdes.h>
 #include <dt-bindings/leds/common.h>
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/net/ti-dp83867.h>
@@ -466,3 +468,31 @@ mbox_m4_0: mbox-m4-0 {
 &mailbox0_cluster7 {
 	status = "disabled";
 };
+
+&serdes_ln_ctrl {
+	idle-states = <AM64_SERDES0_LANE0_PCIE0>;
+};
+
+&serdes0 {
+	serdes0_pcie_link: phy@0 {
+		reg = <0>;
+		cdns,num-lanes = <1>;
+		#phy-cells = <0>;
+		cdns,phy-type = <PHY_TYPE_PCIE>;
+		resets = <&serdes_wiz0 1>;
+	};
+};
+
+&pcie0_rc {
+	reset-gpios = <&exp1 5 GPIO_ACTIVE_HIGH>;
+	phys = <&serdes0_pcie_link>;
+	phy-names = "pcie-phy";
+	num-lanes = <1>;
+};
+
+&pcie0_ep {
+	phys = <&serdes0_pcie_link>;
+	phy-names = "pcie-phy";
+	num-lanes = <1>;
+	status = "disabled";
+};