Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k: (21 commits)
  m68k/mac: Make CONFIG_HEARTBEAT unavailable on Mac
  m68k/serial: Remove references to obsolete serial config options
  m68k/net: Remove obsolete IRQ_FLG_* users
  m68k: Don't comment out syscalls used by glibc
  m68k/atari: Move declaration of atari_SCC_reset_done to header file
  m68k/serial: Remove references to obsolete CONFIG_SERIAL167
  m68k/hp300: Export hp300_ledstate
  m68k: Initconst section fixes
  m68k/mac: cleanup macro case
  mac_scsi: fix mac_scsi on some powerbooks
  m68k/mac: fix powerbook 150 adb_type
  m68k/mac: fix baboon irq disable and shutdown
  m68k/mac: oss irq fixes
  m68k/mac: fix nubus slot irq disable and shutdown
  m68k/mac: enable via_alt_mapping on performa 580
  m68k/mac: cleanup forward declarations
  m68k/mac: cleanup mac_irq_pending
  m68k/mac: cleanup mac_clear_irq
  m68k/mac: early console
  m68k/mvme16x: Add support for EARLY_PRINTK
  ...

Fix up trivial conflict in arch/m68k/Kconfig.debug due to new
EARLY_PRINTK config option addition clashing with movement of the
BOOTPARAM options.

arch/m68k/Kconfig.debug

@@ -10,6 +10,17 @@ config BOOTPARAM_STRING
 	default 'console=ttyS0,19200'
 	depends on BOOTPARAM
 
+config EARLY_PRINTK
+	bool "Early printk" if EMBEDDED
+	depends on MVME16x || MAC
+	default y
+	help
+          Write kernel log output directly to a serial port.
+
+          This is useful for kernel debugging when your machine crashes very
+          early before the console code is initialized.
+          You should normally say N here, unless you want to debug such a crash.
+
 if !MMU
 
 config FULLDEBUG

arch/m68k/Kconfig.devices

@@ -8,8 +8,8 @@ config ARCH_MAY_HAVE_PC_FDC
 menu "Platform devices"
 
 config HEARTBEAT
-	bool "Use power LED as a heartbeat" if AMIGA || APOLLO || ATARI || MAC ||Q40
-	default y if !AMIGA && !APOLLO && !ATARI && !MAC && !Q40 && HP300
+	bool "Use power LED as a heartbeat" if AMIGA || APOLLO || ATARI || Q40
+	default y if !AMIGA && !APOLLO && !ATARI && !Q40 && HP300
 	help
 	  Use the power-on LED on your machine as a load meter.  The exact
 	  behavior is platform-dependent, but normally the flash frequency is
@@ -59,27 +59,6 @@ endmenu
 
 menu "Character devices"
 
-config ATARI_MFPSER
-	tristate "Atari MFP serial support"
-	depends on ATARI
-	---help---
-	  If you like to use the MFP serial ports ("Modem1", "Serial1") under
-	  Linux, say Y. The driver equally supports all kinds of MFP serial
-	  ports and automatically detects whether Serial1 is available.
-
-	  To compile this driver as a module, choose M here.
-
-	  Note for Falcon users: You also have an MFP port, it's just not
-	  wired to the outside... But you could use the port under Linux.
-
-config ATARI_MIDI
-	tristate "Atari MIDI serial support"
-	depends on ATARI
-	help
-	  If you want to use your Atari's MIDI port in Linux, say Y.
-
-	  To compile this driver as a module, choose M here.
-
 config ATARI_DSP56K
 	tristate "Atari DSP56k support (EXPERIMENTAL)"
 	depends on ATARI && EXPERIMENTAL
@@ -99,15 +78,6 @@ config AMIGA_BUILTIN_SERIAL
 
 	  To compile this driver as a module, choose M here.
 
-config MULTIFACE_III_TTY
-	tristate "Multiface Card III serial support"
-	depends on AMIGA
-	help
-	  If you want to use a Multiface III card's serial port in Linux,
-	  answer Y.
-
-	  To compile this driver as a module, choose M here.
-
 config HPDCA
 	tristate "HP DCA serial support"
 	depends on DIO && SERIAL_8250
@@ -122,13 +92,9 @@ config HPAPCI
 	  If you want to use the internal "APCI" serial ports on an HP400
 	  machine, say Y here.
 
-config DN_SERIAL
-	bool "Support for DN serial port (dummy)"
-	depends on APOLLO
-
 config SERIAL_CONSOLE
 	bool "Support for serial port console"
-	depends on (AMIGA || ATARI || SUN3 || SUN3X || VME || APOLLO) && (ATARI_MFPSER=y || ATARI_MIDI=y || AMIGA_BUILTIN_SERIAL=y || MULTIFACE_III_TTY=y || SERIAL=y || SERIAL167 || DN_SERIAL)
+	depends on AMIGA_BUILTIN_SERIAL=y
 	---help---
 	  If you say Y here, it will be possible to use a serial port as the
 	  system console (the system console is the device which receives all
@@ -140,10 +106,10 @@ config SERIAL_CONSOLE
 	  (/dev/tty0) will still be used as the system console by default, but
 	  you can alter that using a kernel command line option such as
 	  "console=ttyS1". (Try "man bootparam" or see the documentation of
-	  your boot loader (lilo or loadlin) about how to pass options to the
-	  kernel at boot time.)
+	  your boot loader about how to pass options to the kernel at boot
+	  time.)
 
-	  If you don't have a VGA card installed and you say Y here, the
+	  If you don't have a graphical console and you say Y here, the
 	  kernel will automatically use the first serial line, /dev/ttyS0, as
 	  system console.
 

arch/m68k/atari/ataints.c

@@ -82,8 +82,6 @@ __ALIGN_STR "\n\t"
 
 extern void atari_microwire_cmd(int cmd);
 
-extern int atari_SCC_reset_done;
-
 static unsigned int atari_irq_startup(struct irq_data *data)
 {
 	unsigned int irq = data->irq;

arch/m68k/atari/debug.c

@@ -202,7 +202,6 @@ static void __init atari_init_mfp_port(int cflag)
 
 static void __init atari_init_scc_port(int cflag)
 {
-	extern int atari_SCC_reset_done;
 	static int clksrc_table[9] =
 		/* reg 11: 0x50 = BRG, 0x00 = RTxC, 0x28 = TRxC */
 		{ 0x50, 0x50, 0x50, 0x50, 0x50, 0x50, 0x50, 0x00, 0x00 };

arch/m68k/configs/amiga_defconfig

@@ -255,7 +255,6 @@ CONFIG_HID=m
 CONFIG_HIDRAW=y
 # CONFIG_USB_SUPPORT is not set
 CONFIG_AMIGA_BUILTIN_SERIAL=y
-CONFIG_MULTIFACE_III_TTY=m
 CONFIG_SERIAL_CONSOLE=y
 CONFIG_EXT2_FS=y
 CONFIG_EXT3_FS=y

arch/m68k/configs/apollo_defconfig

@@ -223,8 +223,6 @@ CONFIG_LOGO=y
 CONFIG_HID=m
 CONFIG_HIDRAW=y
 # CONFIG_USB_SUPPORT is not set
-CONFIG_DN_SERIAL=y
-CONFIG_SERIAL_CONSOLE=y
 CONFIG_EXT2_FS=y
 CONFIG_EXT3_FS=y
 # CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set

arch/m68k/configs/atari_defconfig

@@ -235,10 +235,7 @@ CONFIG_DMASOUND_ATARI=m
 CONFIG_HID=m
 CONFIG_HIDRAW=y
 # CONFIG_USB_SUPPORT is not set
-CONFIG_ATARI_MFPSER=y
-CONFIG_ATARI_MIDI=y
 CONFIG_ATARI_DSP56K=m
-CONFIG_SERIAL_CONSOLE=y
 CONFIG_EXT2_FS=y
 CONFIG_EXT3_FS=y
 # CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set

arch/m68k/configs/multi_defconfig

@@ -318,13 +318,8 @@ CONFIG_DMASOUND_Q40=m
 CONFIG_HID=m
 CONFIG_HIDRAW=y
 # CONFIG_USB_SUPPORT is not set
-CONFIG_ATARI_MFPSER=y
-CONFIG_ATARI_MIDI=y
 CONFIG_ATARI_DSP56K=m
 CONFIG_AMIGA_BUILTIN_SERIAL=y
-CONFIG_MULTIFACE_III_TTY=m
-CONFIG_SERIAL167=y
-CONFIG_DN_SERIAL=y
 CONFIG_SERIAL_CONSOLE=y
 CONFIG_EXT2_FS=y
 CONFIG_EXT3_FS=y

arch/m68k/configs/mvme16x_defconfig

@@ -218,8 +218,6 @@ CONFIG_GEN_RTC_X=y
 CONFIG_HID=m
 CONFIG_HIDRAW=y
 # CONFIG_USB_SUPPORT is not set
-CONFIG_SERIAL167=y
-CONFIG_SERIAL_CONSOLE=y
 CONFIG_EXT2_FS=y
 CONFIG_EXT3_FS=y
 # CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set

arch/m68k/emu/nfeth.c

@@ -39,7 +39,7 @@ enum {
 #define MAX_UNIT	8
 
 /* These identify the driver base version and may not be removed. */
-static const char version[] __devinitdata =
+static const char version[] __devinitconst =
 	KERN_INFO KBUILD_MODNAME ".c:v" DRV_VERSION " " DRV_RELDATE
 	" S.Opichal, M.Jurik, P.Stehlik\n"
 	KERN_INFO " http://aranym.org/\n";

arch/m68k/hp300/config.c

@@ -24,7 +24,8 @@
 
 unsigned long hp300_model;
 unsigned long hp300_uart_scode = -1;
-unsigned char ledstate;
+unsigned char hp300_ledstate;
+EXPORT_SYMBOL(hp300_ledstate);
 
 static char s_hp330[] __initdata = "330";
 static char s_hp340[] __initdata = "340";

arch/m68k/include/asm/atarihw.h

@@ -30,6 +30,8 @@ extern u_long atari_switches;
 extern int atari_rtc_year_offset;
 extern int atari_dont_touch_floppy_select;
 
+extern int atari_SCC_reset_done;
+
 /* convenience macros for testing machine type */
 #define MACH_IS_ST	((atari_mch_cookie >> 16) == ATARI_MCH_ST)
 #define MACH_IS_STE	((atari_mch_cookie >> 16) == ATARI_MCH_STE && \

arch/m68k/include/asm/blinken.h

@@ -17,15 +17,15 @@
 
 #define HP300_LEDS		0xf001ffff
 
-extern unsigned char ledstate;
+extern unsigned char hp300_ledstate;
 
 static __inline__ void blinken_leds(int on, int off)
 {
 	if (MACH_IS_HP300)
 	{
-		ledstate |= on;
-		ledstate &= ~off;
-		out_8(HP300_LEDS, ~ledstate);
+		hp300_ledstate |= on;
+		hp300_ledstate &= ~off;
+		out_8(HP300_LEDS, ~hp300_ledstate);
 	}
 }
 

arch/m68k/include/asm/mac_baboon.h

@@ -29,4 +29,10 @@ struct baboon {
 				 */
 };
 
+extern int baboon_present;
+
+extern void baboon_register_interrupts(void);
+extern void baboon_irq_enable(int);
+extern void baboon_irq_disable(int);
+
 #endif /* __ASSEMBLY **/

arch/m68k/include/asm/mac_iop.h

@@ -159,4 +159,6 @@ extern void iop_upload_code(uint, __u8 *, uint, __u16);
 extern void iop_download_code(uint, __u8 *, uint, __u16);
 extern __u8 *iop_compare_code(uint, __u8 *, uint, __u16);
 
+extern void iop_register_interrupts(void);
+
 #endif /* __ASSEMBLY__ */

arch/m68k/include/asm/mac_oss.h

@@ -58,25 +58,6 @@
 
 #define OSS_POWEROFF	0x80
 
-/*
- * OSS Interrupt levels for various sub-systems
- *
- * This mapping is laid out with two things in mind: first, we try to keep
- * things on their own levels to avoid having to do double-dispatches. Second,
- * the levels match as closely as possible the alternate IRQ mapping mode (aka
- * "A/UX mode") available on some VIA machines.
- */
-
-#define OSS_IRQLEV_DISABLED	0
-#define OSS_IRQLEV_IOPISM	1	/* ADB? */
-#define OSS_IRQLEV_SCSI		IRQ_AUTO_2
-#define OSS_IRQLEV_NUBUS	IRQ_AUTO_3	/* keep this on its own level */
-#define OSS_IRQLEV_IOPSCC	IRQ_AUTO_4	/* matches VIA alternate mapping */
-#define OSS_IRQLEV_SOUND	IRQ_AUTO_5	/* matches VIA alternate mapping */
-#define OSS_IRQLEV_60HZ		6	/* matches VIA alternate mapping */
-#define OSS_IRQLEV_VIA1		IRQ_AUTO_6	/* matches VIA alternate mapping */
-#define OSS_IRQLEV_PARITY	7	/* matches VIA alternate mapping */
-
 #ifndef __ASSEMBLY__
 
 struct mac_oss {
@@ -91,4 +72,8 @@ struct mac_oss {
 extern volatile struct mac_oss *oss;
 extern int oss_present;
 
+extern void oss_register_interrupts(void);
+extern void oss_irq_enable(int);
+extern void oss_irq_disable(int);
+
 #endif /* __ASSEMBLY__ */

arch/m68k/include/asm/mac_psc.h

@@ -211,6 +211,10 @@
 extern volatile __u8 *psc;
 extern int psc_present;
 
+extern void psc_register_interrupts(void);
+extern void psc_irq_enable(int);
+extern void psc_irq_disable(int);
+
 /*
  *	Access functions
  */

arch/m68k/include/asm/mac_via.h

@@ -254,6 +254,15 @@
 extern volatile __u8 *via1,*via2;
 extern int rbv_present,via_alt_mapping;
 
+extern void via_register_interrupts(void);
+extern void via_irq_enable(int);
+extern void via_irq_disable(int);
+extern void via_nubus_irq_startup(int irq);
+extern void via_nubus_irq_shutdown(int irq);
+extern void via1_irq(unsigned int irq, struct irq_desc *desc);
+extern void via1_set_head(int);
+extern int via2_scsi_drq_pending(void);
+
 static inline int rbv_set_video_bpp(int bpp)
 {
 	char val = (bpp==1)?0:(bpp==2)?1:(bpp==4)?2:(bpp==8)?3:-1;

arch/m68k/include/asm/macintosh.h

@@ -11,16 +11,10 @@
 extern void mac_reset(void);
 extern void mac_poweroff(void);
 extern void mac_init_IRQ(void);
-extern int mac_irq_pending(unsigned int);
+
 extern void mac_irq_enable(struct irq_data *data);
 extern void mac_irq_disable(struct irq_data *data);
 
-/*
- *	Floppy driver magic hook - probably shouldn't be here
- */
-
-extern void via1_set_head(int);
-
 /*
  *	Macintosh Table
  */
@@ -48,7 +42,7 @@ struct mac_model
 #define MAC_ADB_IOP		6
 
 #define MAC_VIA_II		1
-#define MAC_VIA_IIci		2
+#define MAC_VIA_IICI		2
 #define MAC_VIA_QUADRA		3
 
 #define MAC_SCSI_NONE		0

arch/m68k/include/asm/macints.h

@@ -104,6 +104,9 @@
 #define IRQ_PSC4_3	  (35)
 #define IRQ_MAC_MACE_DMA  IRQ_PSC4_3
 
+/* OSS Level 4 interrupts */
+#define IRQ_MAC_SCC	  (33)
+
 /* Level 5 (PSC, AV Macs only) interrupts */
 #define IRQ_PSC5_0	  (40)
 #define IRQ_PSC5_1	  (41)
@@ -131,9 +134,6 @@
 #define IRQ_BABOON_2	  (66)
 #define IRQ_BABOON_3	  (67)
 
-/* On non-PSC machines, the serial ports share an IRQ */
-#define IRQ_MAC_SCC	  IRQ_AUTO_4
-
 #define SLOT2IRQ(x)	  (x + 47)
 #define IRQ2SLOT(x)	  (x - 47)
 

arch/m68k/include/asm/serial.h

@@ -25,9 +25,11 @@
 #define STD_COM4_FLAGS ASYNC_BOOT_AUTOCONF
 #endif
 
+#ifdef CONFIG_ISA
 #define SERIAL_PORT_DFNS			\
 	/* UART CLK   PORT IRQ     FLAGS        */			\
 	{ 0, BASE_BAUD, 0x3F8, 4, STD_COM_FLAGS },	/* ttyS0 */	\
 	{ 0, BASE_BAUD, 0x2F8, 3, STD_COM_FLAGS },	/* ttyS1 */	\
 	{ 0, BASE_BAUD, 0x3E8, 4, STD_COM_FLAGS },	/* ttyS2 */	\
 	{ 0, BASE_BAUD, 0x2E8, 3, STD_COM4_FLAGS },	/* ttyS3 */
+#endif

arch/m68k/include/asm/unistd.h

@@ -132,10 +132,10 @@
 #define __NR_adjtimex		124
 #define __NR_mprotect		125
 #define __NR_sigprocmask	126
-/*#define __NR_create_module	127*/
+#define __NR_create_module	127
 #define __NR_init_module	128
 #define __NR_delete_module	129
-/*#define __NR_get_kernel_syms	130*/
+#define __NR_get_kernel_syms	130
 #define __NR_quotactl		131
 #define __NR_getpgid		132
 #define __NR_fchdir		133
@@ -172,7 +172,7 @@
 #define __NR_setresuid		164
 #define __NR_getresuid		165
 #define __NR_getpagesize	166
-/*#define __NR_query_module	167*/
+#define __NR_query_module	167
 #define __NR_poll		168
 #define __NR_nfsservctl		169
 #define __NR_setresgid		170
@@ -193,8 +193,8 @@
 #define __NR_capset		185
 #define __NR_sigaltstack	186
 #define __NR_sendfile		187
-/*#define __NR_getpmsg		188*/	/* some people actually want streams */
-/*#define __NR_putpmsg		189*/	/* some people actually want streams */
+#define __NR_getpmsg		188	/* some people actually want streams */
+#define __NR_putpmsg		189	/* some people actually want streams */
 #define __NR_vfork		190
 #define __NR_ugetrlimit		191
 #define __NR_mmap2		192

arch/m68k/kernel/head.S

@@ -250,9 +250,8 @@
  * USE_MFP:	Use the ST-MFP port (Modem1) for serial debug.
  *
  * Macintosh constants:
- * MAC_SERIAL_DEBUG:	Turns on serial debug output for the Macintosh.
- * MAC_USE_SCC_A:	Use the SCC port A (modem) for serial debug.
- * MAC_USE_SCC_B:	Use the SCC port B (printer) for serial debug (default).
+ * MAC_USE_SCC_A: Use SCC port A (modem) for serial debug and early console.
+ * MAC_USE_SCC_B: Use SCC port B (printer) for serial debug and early console.
  */
 
 #include <linux/linkage.h>
@@ -268,33 +267,25 @@
 
 #include <asm/machw.h>
 
-/*
- * Macintosh console support
- */
-
 #ifdef CONFIG_FRAMEBUFFER_CONSOLE
 #define CONSOLE
 #define CONSOLE_PENGUIN
 #endif
 
-/*
- * Macintosh serial debug support; outputs boot info to the printer
- *   and/or modem serial ports
- */
-#undef MAC_SERIAL_DEBUG
+#ifdef CONFIG_EARLY_PRINTK
+#define SERIAL_DEBUG
+#else
+#undef SERIAL_DEBUG
+#endif
 
-/*
- * Macintosh serial debug port selection; define one or both;
- *   requires MAC_SERIAL_DEBUG to be defined
- */
-#define MAC_USE_SCC_A		/* Macintosh modem serial port */
-#define MAC_USE_SCC_B		/* Macintosh printer serial port */
+#else /* !CONFIG_MAC */
 
-#endif	/* CONFIG_MAC */
+#define SERIAL_DEBUG
+
+#endif /* !CONFIG_MAC */
 
 #undef MMU_PRINT
 #undef MMU_NOCACHE_KERNEL
-#define SERIAL_DEBUG
 #undef DEBUG
 
 /*
@@ -655,11 +646,11 @@ ENTRY(__start)
 	lea	%pc@(L(mac_rowbytes)),%a1
 	movel	%a0@,%a1@
 
-#ifdef MAC_SERIAL_DEBUG
+#ifdef SERIAL_DEBUG
 	get_bi_record	BI_MAC_SCCBASE
 	lea	%pc@(L(mac_sccbase)),%a1
 	movel	%a0@,%a1@
-#endif /* MAC_SERIAL_DEBUG */
+#endif
 
 #if 0
 	/*
@@ -1427,7 +1418,7 @@ L(mmu_fixup_done):
 	subl	%d0,L(console_font)
 	subl	%d0,L(console_font_data)
 #endif
-#ifdef MAC_SERIAL_DEBUG
+#ifdef SERIAL_DEBUG
 	orl	#0x50000000,L(mac_sccbase)
 #endif
 1:
@@ -1917,7 +1908,7 @@ mmu_030_print:
 	jbne	30b
 
 mmu_print_done:
-	puts	"\n\n"
+	puts	"\n"
 
 func_return	mmu_print
 
@@ -2768,7 +2759,7 @@ L(scc_initable_mac):
 	.byte	9,0		/* no interrupts */
 	.byte	10,0		/* NRZ */
 	.byte	11,0x50		/* use baud rate generator */
-	.byte	12,10,13,0	/* 9600 baud */
+	.byte	12,1,13,0	/* 38400 baud */
 	.byte	14,1		/* Baud rate generator enable */
 	.byte	3,0xc1		/* enable receiver */
 	.byte	5,0xea		/* enable transmitter */
@@ -2906,10 +2897,12 @@ func_start	serial_init,%d0/%d1/%a0/%a1
 #endif
 #ifdef CONFIG_MAC
 	is_not_mac(L(serial_init_not_mac))
-#ifdef MAC_SERIAL_DEBUG
-#if !defined(MAC_USE_SCC_A) && !defined(MAC_USE_SCC_B)
-#define MAC_USE_SCC_B
-#endif
+
+#ifdef SERIAL_DEBUG
+/* You may define either or both of these. */
+#define MAC_USE_SCC_A /* Modem port */
+#define MAC_USE_SCC_B /* Printer port */
+
 #define mac_scc_cha_b_ctrl_offset	0x0
 #define mac_scc_cha_a_ctrl_offset	0x2
 #define mac_scc_cha_b_data_offset	0x4
@@ -2940,7 +2933,7 @@ func_start	serial_init,%d0/%d1/%a0/%a1
 	jra	7b
 8:
 #endif	/* MAC_USE_SCC_B */
-#endif	/* MAC_SERIAL_DEBUG */
+#endif	/* SERIAL_DEBUG */
 
 	jra	L(serial_init_done)
 L(serial_init_not_mac):
@@ -3011,7 +3004,7 @@ func_start	serial_putc,%d0/%d1/%a0/%a1
 #ifdef CONFIG_MAC
 	is_not_mac(5f)
 
-#ifdef MAC_SERIAL_DEBUG
+#ifdef SERIAL_DEBUG
 
 #ifdef MAC_USE_SCC_A
 	movel	%pc@(L(mac_sccbase)),%a1
@@ -3029,7 +3022,7 @@ func_start	serial_putc,%d0/%d1/%a0/%a1
 	moveb	%d0,%a1@(mac_scc_cha_b_data_offset)
 #endif	/* MAC_USE_SCC_B */
 
-#endif	/* MAC_SERIAL_DEBUG */
+#endif	/* SERIAL_DEBUG */
 
 	jra	L(serial_putc_done)
 5:
@@ -3248,33 +3241,39 @@ func_return	putn
 
 #ifdef CONFIG_MAC
 /*
- *	mac_serial_print
+ *	mac_early_print
  *
  *	This routine takes its parameters on the stack.  It then
- *	turns around and calls the internal routine.  This routine
- *	is used until the Linux console driver initializes itself.
+ *	turns around and calls the internal routines.  This routine
+ *	is used by the boot console.
  *
  *	The calling parameters are:
- *		void mac_serial_print(const char *str);
+ *		void mac_early_print(const char *str, unsigned length);
  *
  *	This routine does NOT understand variable arguments only
  *	simple strings!
  */
-ENTRY(mac_serial_print)
-	moveml	%d0/%a0,%sp@-
-#if 1
-	move	%sr,%sp@-
+ENTRY(mac_early_print)
+	moveml	%d0/%d1/%a0,%sp@-
+	movew	%sr,%sp@-
 	ori	#0x0700,%sr
-#endif
-	movel	%sp@(10),%a0		/* fetch parameter */
+	movel	%sp@(18),%a0		/* fetch parameter */
+	movel	%sp@(22),%d1		/* fetch parameter */
 	jra	2f
-1:	serial_putc	%d0
-2:	moveb	%a0@+,%d0
-	jne	1b
-#if 1
-	move	%sp@+,%sr
+1:
+#ifdef CONSOLE
+	console_putc	%d0
+#endif
+#ifdef SERIAL_DEBUG
+	serial_putc	%d0
 #endif
-	moveml	%sp@+,%d0/%a0
+	subq	#1,%d1
+2:	jeq	3f
+	moveb	%a0@+,%d0
+	jne	1b
+3:
+	movew	%sp@+,%sr
+	moveml	%sp@+,%d0/%d1/%a0
 	rts
 #endif /* CONFIG_MAC */
 
@@ -3409,10 +3408,10 @@ func_start	console_put_stats,%a0/%d7
 	 *		a0 = pointer to boot_info
 	 *		d7 = value of boot_info fields
 	 */
-	puts	"\nMacLinux\n\n"
+	puts	"\nMacLinux\n"
 
 #ifdef SERIAL_DEBUG
-	puts	" vidaddr:"
+	puts	"\n vidaddr:"
 	putn	%pc@(L(mac_videobase))		/* video addr. */
 
 	puts	"\n  _stext:"
@@ -3423,19 +3422,21 @@ func_start	console_put_stats,%a0/%d7
 	lea	%pc@(_end),%a0
 	putn	%a0
 
-	puts	"\ncpuid:"
+	puts	"\n   cpuid:"
 	putn	%pc@(L(cputype))
-	putc	'\n'
 
-#ifdef MAC_SERIAL_DEBUG
+#  ifdef CONFIG_MAC
+	puts	"\n sccbase:"
 	putn	%pc@(L(mac_sccbase))
+#  endif
+#  ifdef MMU_PRINT
 	putc	'\n'
-#endif
-#  if defined(MMU_PRINT)
 	jbsr	mmu_print_machine_cpu_types
-#  endif /* MMU_PRINT */
+#  endif
 #endif /* SERIAL_DEBUG */
 
+	putc	'\n'
+
 func_return	console_put_stats
 
 #ifdef CONSOLE_PENGUIN
@@ -3896,11 +3897,11 @@ L(mac_dimensions):
 	.long	0
 L(mac_rowbytes):
 	.long	0
-#ifdef MAC_SERIAL_DEBUG
+#ifdef SERIAL_DEBUG
 L(mac_sccbase):
 	.long	0
-#endif /* MAC_SERIAL_DEBUG */
 #endif
+#endif /* CONFIG_MAC */
 
 #if defined (CONFIG_APOLLO)
 LSRB0        = 0x10412

arch/m68k/mac/baboon.c

@@ -8,13 +8,8 @@
 
 #include <linux/types.h>
 #include <linux/kernel.h>
-#include <linux/mm.h>
-#include <linux/delay.h>
-#include <linux/init.h>
 #include <linux/irq.h>
 
-#include <asm/traps.h>
-#include <asm/bootinfo.h>
 #include <asm/macintosh.h>
 #include <asm/macints.h>
 #include <asm/mac_baboon.h>
@@ -23,7 +18,6 @@
 
 int baboon_present;
 static volatile struct baboon *baboon;
-static unsigned char baboon_disabled;
 
 #if 0
 extern int macide_ack_intr(struct ata_channel *);
@@ -89,51 +83,32 @@ static void baboon_irq(unsigned int irq, struct irq_desc *desc)
 
 void __init baboon_register_interrupts(void)
 {
-	baboon_disabled = 0;
 	irq_set_chained_handler(IRQ_NUBUS_C, baboon_irq);
 }
 
 /*
- * The means for masking individual baboon interrupts remains a mystery, so
- * enable the umbrella interrupt only when no baboon interrupt is disabled.
+ * The means for masking individual Baboon interrupts remains a mystery.
+ * However, since we only use the IDE IRQ, we can just enable/disable all
+ * Baboon interrupts. If/when we handle more than one Baboon IRQ, we must
+ * either figure out how to mask them individually or else implement the
+ * same workaround that's used for NuBus slots (see nubus_disabled and
+ * via_nubus_irq_shutdown).
  */
 
 void baboon_irq_enable(int irq)
 {
-	int irq_idx = IRQ_IDX(irq);
-
 #ifdef DEBUG_IRQUSE
 	printk("baboon_irq_enable(%d)\n", irq);
 #endif
 
-	baboon_disabled &= ~(1 << irq_idx);
-	if (!baboon_disabled)
 	mac_irq_enable(irq_get_irq_data(IRQ_NUBUS_C));
 }
 
 void baboon_irq_disable(int irq)
 {
-	int irq_idx = IRQ_IDX(irq);
-
 #ifdef DEBUG_IRQUSE
 	printk("baboon_irq_disable(%d)\n", irq);
 #endif
 
-	baboon_disabled |= 1 << irq_idx;
-	if (baboon_disabled)
 	mac_irq_disable(irq_get_irq_data(IRQ_NUBUS_C));
 }
-
-void baboon_irq_clear(int irq)
-{
-	int irq_idx = IRQ_IDX(irq);
-
-	baboon->mb_ifr &= ~(1 << irq_idx);
-}
-
-int baboon_irq_pending(int irq)
-{
-	int irq_idx = IRQ_IDX(irq);
-
-	return baboon->mb_ifr & (1 << irq_idx);
-}

arch/m68k/mac/config.c

@@ -71,6 +71,31 @@ static void mac_get_model(char *str);
 static void mac_identify(void);
 static void mac_report_hardware(void);
 
+#ifdef CONFIG_EARLY_PRINTK
+asmlinkage void __init mac_early_print(const char *s, unsigned n);
+
+static void __init mac_early_cons_write(struct console *con,
+                                 const char *s, unsigned n)
+{
+	mac_early_print(s, n);
+}
+
+static struct console __initdata mac_early_cons = {
+	.name  = "early",
+	.write = mac_early_cons_write,
+	.flags = CON_PRINTBUFFER | CON_BOOT,
+	.index = -1
+};
+
+int __init mac_unregister_early_cons(void)
+{
+	/* mac_early_print can't be used after init sections are discarded */
+	return unregister_console(&mac_early_cons);
+}
+
+late_initcall(mac_unregister_early_cons);
+#endif
+
 static void __init mac_sched_init(irq_handler_t vector)
 {
 	via_init_clock(vector);
@@ -164,6 +189,10 @@ void __init config_mac(void)
 	mach_beep = mac_mksound;
 #endif
 
+#ifdef CONFIG_EARLY_PRINTK
+	register_console(&mac_early_cons);
+#endif
+
 	/*
 	 * Determine hardware present
 	 */
@@ -192,7 +221,7 @@ void __init config_mac(void)
  * inaccurate, so look here if a new Mac model won't run. Example: if
  * a Mac crashes immediately after the VIA1 registers have been dumped
  * to the screen, it probably died attempting to read DirB on a RBV.
- * Meaning it should have MAC_VIA_IIci here :-)
+ * Meaning it should have MAC_VIA_IICI here :-)
  */
 
 struct mac_model *macintosh_config;
@@ -267,7 +296,7 @@ static struct mac_model mac_data_table[] = {
 		.ident		= MAC_MODEL_IICI,
 		.name		= "IIci",
 		.adb_type	= MAC_ADB_II,
-		.via_type	= MAC_VIA_IIci,
+		.via_type	= MAC_VIA_IICI,
 		.scsi_type	= MAC_SCSI_OLD,
 		.scc_type	= MAC_SCC_II,
 		.nubus_type	= MAC_NUBUS,
@@ -276,7 +305,7 @@ static struct mac_model mac_data_table[] = {
 		.ident		= MAC_MODEL_IIFX,
 		.name		= "IIfx",
 		.adb_type	= MAC_ADB_IOP,
-		.via_type	= MAC_VIA_IIci,
+		.via_type	= MAC_VIA_IICI,
 		.scsi_type	= MAC_SCSI_OLD,
 		.scc_type	= MAC_SCC_IOP,
 		.nubus_type	= MAC_NUBUS,
@@ -285,7 +314,7 @@ static struct mac_model mac_data_table[] = {
 		.ident		= MAC_MODEL_IISI,
 		.name		= "IIsi",
 		.adb_type	= MAC_ADB_IISI,
-		.via_type	= MAC_VIA_IIci,
+		.via_type	= MAC_VIA_IICI,
 		.scsi_type	= MAC_SCSI_OLD,
 		.scc_type	= MAC_SCC_II,
 		.nubus_type	= MAC_NUBUS,
@@ -294,7 +323,7 @@ static struct mac_model mac_data_table[] = {
 		.ident		= MAC_MODEL_IIVI,
 		.name		= "IIvi",
 		.adb_type	= MAC_ADB_IISI,
-		.via_type	= MAC_VIA_IIci,
+		.via_type	= MAC_VIA_IICI,
 		.scsi_type	= MAC_SCSI_OLD,
 		.scc_type	= MAC_SCC_II,
 		.nubus_type	= MAC_NUBUS,
@@ -303,7 +332,7 @@ static struct mac_model mac_data_table[] = {
 		.ident		= MAC_MODEL_IIVX,
 		.name		= "IIvx",
 		.adb_type	= MAC_ADB_IISI,
-		.via_type	= MAC_VIA_IIci,
+		.via_type	= MAC_VIA_IICI,
 		.scsi_type	= MAC_SCSI_OLD,
 		.scc_type	= MAC_SCC_II,
 		.nubus_type	= MAC_NUBUS,
@@ -318,7 +347,7 @@ static struct mac_model mac_data_table[] = {
 		.ident		= MAC_MODEL_CLII,
 		.name		= "Classic II",
 		.adb_type	= MAC_ADB_IISI,
-		.via_type	= MAC_VIA_IIci,
+		.via_type	= MAC_VIA_IICI,
 		.scsi_type	= MAC_SCSI_OLD,
 		.scc_type	= MAC_SCC_II,
 		.nubus_type	= MAC_NUBUS,
@@ -327,7 +356,7 @@ static struct mac_model mac_data_table[] = {
 		.ident		= MAC_MODEL_CCL,
 		.name		= "Color Classic",
 		.adb_type	= MAC_ADB_CUDA,
-		.via_type	= MAC_VIA_IIci,
+		.via_type	= MAC_VIA_IICI,
 		.scsi_type	= MAC_SCSI_OLD,
 		.scc_type	= MAC_SCC_II,
 		.nubus_type	= MAC_NUBUS,
@@ -336,7 +365,7 @@ static struct mac_model mac_data_table[] = {
 		.ident		= MAC_MODEL_CCLII,
 		.name		= "Color Classic II",
 		.adb_type	= MAC_ADB_CUDA,
-		.via_type	= MAC_VIA_IIci,
+		.via_type	= MAC_VIA_IICI,
 		.scsi_type	= MAC_SCSI_OLD,
 		.scc_type	= MAC_SCC_II,
 		.nubus_type	= MAC_NUBUS,
@@ -351,7 +380,7 @@ static struct mac_model mac_data_table[] = {
 		.ident		= MAC_MODEL_LC,
 		.name		= "LC",
 		.adb_type	= MAC_ADB_IISI,
-		.via_type	= MAC_VIA_IIci,
+		.via_type	= MAC_VIA_IICI,
 		.scsi_type	= MAC_SCSI_OLD,
 		.scc_type	= MAC_SCC_II,
 		.nubus_type	= MAC_NUBUS,
@@ -360,7 +389,7 @@ static struct mac_model mac_data_table[] = {
 		.ident		= MAC_MODEL_LCII,
 		.name		= "LC II",
 		.adb_type	= MAC_ADB_IISI,
-		.via_type	= MAC_VIA_IIci,
+		.via_type	= MAC_VIA_IICI,
 		.scsi_type	= MAC_SCSI_OLD,
 		.scc_type	= MAC_SCC_II,
 		.nubus_type	= MAC_NUBUS,
@@ -369,7 +398,7 @@ static struct mac_model mac_data_table[] = {
 		.ident		= MAC_MODEL_LCIII,
 		.name		= "LC III",
 		.adb_type	= MAC_ADB_IISI,
-		.via_type	= MAC_VIA_IIci,
+		.via_type	= MAC_VIA_IICI,
 		.scsi_type	= MAC_SCSI_OLD,
 		.scc_type	= MAC_SCC_II,
 		.nubus_type	= MAC_NUBUS,
@@ -497,7 +526,7 @@ static struct mac_model mac_data_table[] = {
 		.ident		= MAC_MODEL_P460,
 		.name		= "Performa 460",
 		.adb_type	= MAC_ADB_IISI,
-		.via_type	= MAC_VIA_IIci,
+		.via_type	= MAC_VIA_IICI,
 		.scsi_type	= MAC_SCSI_OLD,
 		.scc_type	= MAC_SCC_II,
 		.nubus_type	= MAC_NUBUS,
@@ -524,7 +553,7 @@ static struct mac_model mac_data_table[] = {
 		.ident		= MAC_MODEL_P520,
 		.name		= "Performa 520",
 		.adb_type	= MAC_ADB_CUDA,
-		.via_type	= MAC_VIA_IIci,
+		.via_type	= MAC_VIA_IICI,
 		.scsi_type	= MAC_SCSI_OLD,
 		.scc_type	= MAC_SCC_II,
 		.nubus_type	= MAC_NUBUS,
@@ -533,7 +562,7 @@ static struct mac_model mac_data_table[] = {
 		.ident		= MAC_MODEL_P550,
 		.name		= "Performa 550",
 		.adb_type	= MAC_ADB_CUDA,
-		.via_type	= MAC_VIA_IIci,
+		.via_type	= MAC_VIA_IICI,
 		.scsi_type	= MAC_SCSI_OLD,
 		.scc_type	= MAC_SCC_II,
 		.nubus_type	= MAC_NUBUS,
@@ -565,7 +594,7 @@ static struct mac_model mac_data_table[] = {
 		.ident		= MAC_MODEL_TV,
 		.name		= "TV",
 		.adb_type	= MAC_ADB_CUDA,
-		.via_type	= MAC_VIA_QUADRA,
+		.via_type	= MAC_VIA_IICI,
 		.scsi_type	= MAC_SCSI_OLD,
 		.scc_type	= MAC_SCC_II,
 		.nubus_type	= MAC_NUBUS,
@@ -574,7 +603,7 @@ static struct mac_model mac_data_table[] = {
 		.ident		= MAC_MODEL_P600,
 		.name		= "Performa 600",
 		.adb_type	= MAC_ADB_IISI,
-		.via_type	= MAC_VIA_IIci,
+		.via_type	= MAC_VIA_IICI,
 		.scsi_type	= MAC_SCSI_OLD,
 		.scc_type	= MAC_SCC_II,
 		.nubus_type	= MAC_NUBUS,
@@ -645,8 +674,8 @@ static struct mac_model mac_data_table[] = {
 	}, {
 		.ident		= MAC_MODEL_PB150,
 		.name		= "PowerBook 150",
-		.adb_type	= MAC_ADB_PB1,
-		.via_type	= MAC_VIA_IIci,
+		.adb_type	= MAC_ADB_PB2,
+		.via_type	= MAC_VIA_IICI,
 		.scsi_type	= MAC_SCSI_OLD,
 		.ide_type	= MAC_IDE_PB,
 		.scc_type	= MAC_SCC_QUADRA,
@@ -732,17 +761,13 @@ static struct mac_model mac_data_table[] = {
 	 * PowerBook Duos are pretty much like normal PowerBooks
 	 * All of these probably have onboard SONIC in the Dock which
 	 * means we'll have to probe for it eventually.
-	 *
-	 * Are these really MAC_VIA_IIci? The developer notes for the
-	 * Duos show pretty much the same custom parts as in most of
-	 * the other PowerBooks which would imply MAC_VIA_QUADRA.
 	 */
 
 	{
 		.ident		= MAC_MODEL_PB210,
 		.name		= "PowerBook Duo 210",
 		.adb_type	= MAC_ADB_PB2,
-		.via_type	= MAC_VIA_IIci,
+		.via_type	= MAC_VIA_IICI,
 		.scsi_type	= MAC_SCSI_OLD,
 		.scc_type	= MAC_SCC_QUADRA,
 		.nubus_type	= MAC_NUBUS,
@@ -751,7 +776,7 @@ static struct mac_model mac_data_table[] = {
 		.ident		= MAC_MODEL_PB230,
 		.name		= "PowerBook Duo 230",
 		.adb_type	= MAC_ADB_PB2,
-		.via_type	= MAC_VIA_IIci,
+		.via_type	= MAC_VIA_IICI,
 		.scsi_type	= MAC_SCSI_OLD,
 		.scc_type	= MAC_SCC_QUADRA,
 		.nubus_type	= MAC_NUBUS,
@@ -760,7 +785,7 @@ static struct mac_model mac_data_table[] = {
 		.ident		= MAC_MODEL_PB250,
 		.name		= "PowerBook Duo 250",
 		.adb_type	= MAC_ADB_PB2,
-		.via_type	= MAC_VIA_IIci,
+		.via_type	= MAC_VIA_IICI,
 		.scsi_type	= MAC_SCSI_OLD,
 		.scc_type	= MAC_SCC_QUADRA,
 		.nubus_type	= MAC_NUBUS,
@@ -769,7 +794,7 @@ static struct mac_model mac_data_table[] = {
 		.ident		= MAC_MODEL_PB270C,
 		.name		= "PowerBook Duo 270c",
 		.adb_type	= MAC_ADB_PB2,
-		.via_type	= MAC_VIA_IIci,
+		.via_type	= MAC_VIA_IICI,
 		.scsi_type	= MAC_SCSI_OLD,
 		.scc_type	= MAC_SCC_QUADRA,
 		.nubus_type	= MAC_NUBUS,
@@ -778,7 +803,7 @@ static struct mac_model mac_data_table[] = {
 		.ident		= MAC_MODEL_PB280,
 		.name		= "PowerBook Duo 280",
 		.adb_type	= MAC_ADB_PB2,
-		.via_type	= MAC_VIA_IIci,
+		.via_type	= MAC_VIA_IICI,
 		.scsi_type	= MAC_SCSI_OLD,
 		.scc_type	= MAC_SCC_QUADRA,
 		.nubus_type	= MAC_NUBUS,
@@ -787,7 +812,7 @@ static struct mac_model mac_data_table[] = {
 		.ident		= MAC_MODEL_PB280C,
 		.name		= "PowerBook Duo 280c",
 		.adb_type	= MAC_ADB_PB2,
-		.via_type	= MAC_VIA_IIci,
+		.via_type	= MAC_VIA_IICI,
 		.scsi_type	= MAC_SCSI_OLD,
 		.scc_type	= MAC_SCC_QUADRA,
 		.nubus_type	= MAC_NUBUS,
@@ -864,8 +889,14 @@ static void __init mac_identify(void)
 		scc_b_rsrcs[1].start = scc_b_rsrcs[1].end = IRQ_MAC_SCC_B;
 		break;
 	default:
+		/* On non-PSC machines, the serial ports share an IRQ. */
+		if (macintosh_config->ident == MAC_MODEL_IIFX) {
 			scc_a_rsrcs[1].start = scc_a_rsrcs[1].end = IRQ_MAC_SCC;
 			scc_b_rsrcs[1].start = scc_b_rsrcs[1].end = IRQ_MAC_SCC;
+		} else {
+			scc_a_rsrcs[1].start = scc_a_rsrcs[1].end = IRQ_AUTO_4;
+			scc_b_rsrcs[1].start = scc_b_rsrcs[1].end = IRQ_AUTO_4;
+		}
 		break;
 	}
 

arch/m68k/mac/iop.c

@@ -115,7 +115,6 @@
 #include <asm/macintosh.h>
 #include <asm/macints.h>
 #include <asm/mac_iop.h>
-#include <asm/mac_oss.h>
 
 /*#define DEBUG_IOP*/
 
@@ -149,8 +148,6 @@ static struct listener iop_listeners[NUM_IOPS][NUM_IOP_CHAN];
 
 irqreturn_t iop_ism_irq(int, void *);
 
-extern void oss_irq_enable(int);
-
 /*
  * Private access functions
  */
@@ -304,11 +301,10 @@ void __init iop_init(void)
 void __init iop_register_interrupts(void)
 {
 	if (iop_ism_present) {
-		if (oss_present) {
-			if (request_irq(OSS_IRQLEV_IOPISM, iop_ism_irq, 0,
+		if (macintosh_config->ident == MAC_MODEL_IIFX) {
+			if (request_irq(IRQ_MAC_ADB, iop_ism_irq, 0,
 					"ISM IOP", (void *)IOP_NUM_ISM))
 				pr_err("Couldn't register ISM IOP interrupt\n");
-			oss_irq_enable(IRQ_MAC_ADB);
 		} else {
 			if (request_irq(IRQ_VIA2_0, iop_ism_irq, 0, "ISM IOP",
 					(void *)IOP_NUM_ISM))

arch/m68k/mac/macints.c

@@ -26,10 +26,6 @@
  *		  - slot 6: timer 1 (not on IIci)
  *		  - slot 7: status of IRQ; signals 'any enabled int.'
  *
- *	2	- OSS (IIfx only?)
- *		  - slot 0: SCSI interrupt
- *		  - slot 1: Sound interrupt
- *
  * Levels 3-6 vary by machine type. For VIA or RBV Macintoshes:
  *
  *	3	- unused (?)
@@ -42,21 +38,30 @@
  *
  *	6	- off switch (?)
  *
- * For OSS Macintoshes (IIfx only at this point):
+ * Machines with Quadra-like VIA hardware, except PSC and PMU machines, support
+ * an alternate interrupt mapping, as used by A/UX. It spreads ethernet and
+ * sound out to their own autovector IRQs and gives VIA1 a higher priority:
  *
- *	3	- Nubus interrupt
- *		  - slot 0: Slot $9
- *		  - slot 1: Slot $A
- *		  - slot 2: Slot $B
- *		  - slot 3: Slot $C
- *		  - slot 4: Slot $D
- *		  - slot 5: Slot $E
+ *	1	- unused (?)
  *
- *	4	- SCC IOP
+ *	3	- on-board SONIC
+ *
+ *	5	- Apple Sound Chip (ASC)
+ *
+ *	6	- VIA1
+ *
+ * For OSS Macintoshes (IIfx only), we apply an interrupt mapping similar to
+ * the Quadra (A/UX) mapping:
+ *
+ *	1	- ISM IOP (ADB)
  *
- *	5	- ISM IOP (ADB?)
+ *	2	- SCSI
  *
- *	6	- unused
+ *	3	- NuBus
+ *
+ *	4	- SCC IOP
+ *
+ *	6	- VIA1
  *
  * For PSC Macintoshes (660AV, 840AV):
  *
@@ -100,87 +105,28 @@
  *   case. They're hidden behind the Nubus slot $C interrupt thus adding a
  *   third layer of indirection. Why oh why did the Apple engineers do that?
  *
- * - We support "fast" and "slow" handlers, just like the Amiga port. The
- *   fast handlers are called first and with all interrupts disabled. They
- *   are expected to execute quickly (hence the name). The slow handlers are
- *   called last with interrupts enabled and the interrupt level restored.
- *   They must therefore be reentrant.
- *
- *   TODO:
- *
  */
 
-#include <linux/module.h>
 #include <linux/types.h>
 #include <linux/kernel.h>
 #include <linux/sched.h>
-#include <linux/kernel_stat.h>
-#include <linux/interrupt.h> /* for intr_count */
+#include <linux/interrupt.h>
+#include <linux/irq.h>
 #include <linux/delay.h>
-#include <linux/seq_file.h>
 
-#include <asm/system.h>
 #include <asm/irq.h>
-#include <asm/traps.h>
-#include <asm/bootinfo.h>
 #include <asm/macintosh.h>
+#include <asm/macints.h>
 #include <asm/mac_via.h>
 #include <asm/mac_psc.h>
+#include <asm/mac_oss.h>
+#include <asm/mac_iop.h>
+#include <asm/mac_baboon.h>
 #include <asm/hwtest.h>
-#include <asm/errno.h>
-#include <asm/macints.h>
 #include <asm/irq_regs.h>
-#include <asm/mac_oss.h>
 
 #define SHUTUP_SONIC
 
-/*
- * VIA/RBV hooks
- */
-
-extern void via_register_interrupts(void);
-extern void via_irq_enable(int);
-extern void via_irq_disable(int);
-extern void via_irq_clear(int);
-extern int  via_irq_pending(int);
-
-/*
- * OSS hooks
- */
-
-extern void oss_register_interrupts(void);
-extern void oss_irq_enable(int);
-extern void oss_irq_disable(int);
-extern void oss_irq_clear(int);
-extern int  oss_irq_pending(int);
-
-/*
- * PSC hooks
- */
-
-extern void psc_register_interrupts(void);
-extern void psc_irq_enable(int);
-extern void psc_irq_disable(int);
-extern void psc_irq_clear(int);
-extern int  psc_irq_pending(int);
-
-/*
- * IOP hooks
- */
-
-extern void iop_register_interrupts(void);
-
-/*
- * Baboon hooks
- */
-
-extern int baboon_present;
-
-extern void baboon_register_interrupts(void);
-extern void baboon_irq_enable(int);
-extern void baboon_irq_disable(int);
-extern void baboon_irq_clear(int);
-
 /*
  * console_loglevel determines NMI handler function
  */
@@ -190,10 +136,15 @@ irqreturn_t mac_debug_handler(int, void *);
 
 /* #define DEBUG_MACINTS */
 
+static unsigned int mac_irq_startup(struct irq_data *);
+static void mac_irq_shutdown(struct irq_data *);
+
 static struct irq_chip mac_irq_chip = {
 	.name		= "mac",
 	.irq_enable	= mac_irq_enable,
 	.irq_disable	= mac_irq_disable,
+	.irq_startup	= mac_irq_startup,
+	.irq_shutdown	= mac_irq_shutdown,
 };
 
 void __init mac_init_IRQ(void)
@@ -239,8 +190,6 @@ void __init mac_init_IRQ(void)
 /*
  *  mac_irq_enable - enable an interrupt source
  * mac_irq_disable - disable an interrupt source
- *   mac_clear_irq - clears a pending interrupt
- * mac_irq_pending - returns the pending status of an IRQ (nonzero = pending)
  *
  * These routines are just dispatchers to the VIA/OSS/PSC routines.
  */
@@ -252,8 +201,6 @@ void mac_irq_enable(struct irq_data *data)
 
 	switch(irq_src) {
 	case 1:
-		via_irq_enable(irq);
-		break;
 	case 2:
 	case 7:
 		if (oss_present)
@@ -262,6 +209,7 @@ void mac_irq_enable(struct irq_data *data)
 			via_irq_enable(irq);
 		break;
 	case 3:
+	case 4:
 	case 5:
 	case 6:
 		if (psc_present)
@@ -269,10 +217,6 @@ void mac_irq_enable(struct irq_data *data)
 		else if (oss_present)
 			oss_irq_enable(irq);
 		break;
-	case 4:
-		if (psc_present)
-			psc_irq_enable(irq);
-		break;
 	case 8:
 		if (baboon_present)
 			baboon_irq_enable(irq);
@@ -287,8 +231,6 @@ void mac_irq_disable(struct irq_data *data)
 
 	switch(irq_src) {
 	case 1:
-		via_irq_disable(irq);
-		break;
 	case 2:
 	case 7:
 		if (oss_present)
@@ -297,6 +239,7 @@ void mac_irq_disable(struct irq_data *data)
 			via_irq_disable(irq);
 		break;
 	case 3:
+	case 4:
 	case 5:
 	case 6:
 		if (psc_present)
@@ -304,10 +247,6 @@ void mac_irq_disable(struct irq_data *data)
 		else if (oss_present)
 			oss_irq_disable(irq);
 		break;
-	case 4:
-		if (psc_present)
-			psc_irq_disable(irq);
-		break;
 	case 8:
 		if (baboon_present)
 			baboon_irq_disable(irq);
@@ -315,65 +254,27 @@ void mac_irq_disable(struct irq_data *data)
 	}
 }
 
-void mac_clear_irq(unsigned int irq)
+static unsigned int mac_irq_startup(struct irq_data *data)
 {
-	switch(IRQ_SRC(irq)) {
-	case 1:
-		via_irq_clear(irq);
-		break;
-	case 2:
-	case 7:
-		if (oss_present)
-			oss_irq_clear(irq);
+	int irq = data->irq;
+
+	if (IRQ_SRC(irq) == 7 && !oss_present)
+		via_nubus_irq_startup(irq);
 	else
-			via_irq_clear(irq);
-		break;
-	case 3:
-	case 5:
-	case 6:
-		if (psc_present)
-			psc_irq_clear(irq);
-		else if (oss_present)
-			oss_irq_clear(irq);
-		break;
-	case 4:
-		if (psc_present)
-			psc_irq_clear(irq);
-		break;
-	case 8:
-		if (baboon_present)
-			baboon_irq_clear(irq);
-		break;
-	}
+		mac_irq_enable(data);
+
+	return 0;
 }
 
-int mac_irq_pending(unsigned int irq)
+static void mac_irq_shutdown(struct irq_data *data)
 {
-	switch(IRQ_SRC(irq)) {
-	case 1:
-		return via_irq_pending(irq);
-	case 2:
-	case 7:
-		if (oss_present)
-			return oss_irq_pending(irq);
+	int irq = data->irq;
+
+	if (IRQ_SRC(irq) == 7 && !oss_present)
+		via_nubus_irq_shutdown(irq);
 	else
-			return via_irq_pending(irq);
-	case 3:
-	case 5:
-	case 6:
-		if (psc_present)
-			return psc_irq_pending(irq);
-		else if (oss_present)
-			return oss_irq_pending(irq);
-		break;
-	case 4:
-		if (psc_present)
-			return psc_irq_pending(irq);
-		break;
-	}
-	return 0;
+		mac_irq_disable(data);
 }
-EXPORT_SYMBOL(mac_irq_pending);
 
 static int num_debug[8];
 

arch/m68k/mac/oss.c

 /*
- *	OSS handling
+ *	Operating System Services (OSS) chip handling
  *	Written by Joshua M. Thompson (funaho@jurai.org)
  *
  *
@@ -30,8 +30,6 @@
 int oss_present;
 volatile struct mac_oss *oss;
 
-extern void via1_irq(unsigned int irq, struct irq_desc *desc);
-
 /*
  * Initialize the OSS
  *
@@ -51,10 +49,8 @@ void __init oss_init(void)
 	/* do this by setting the source's interrupt level to zero. */
 
 	for (i = 0; i <= OSS_NUM_SOURCES; i++) {
-		oss->irq_level[i] = OSS_IRQLEV_DISABLED;
+		oss->irq_level[i] = 0;
 	}
-	/* If we disable VIA1 here, we never really handle it... */
-	oss->irq_level[OSS_VIA1] = OSS_IRQLEV_VIA1;
 }
 
 /*
@@ -66,17 +62,13 @@ void __init oss_nubus_init(void)
 }
 
 /*
- * Handle miscellaneous OSS interrupts. Right now that's just sound
- * and SCSI; everything else is routed to its own autovector IRQ.
+ * Handle miscellaneous OSS interrupts.
  */
 
 static void oss_irq(unsigned int irq, struct irq_desc *desc)
 {
-	int events;
-
-	events = oss->irq_pending & (OSS_IP_SOUND|OSS_IP_SCSI);
-	if (!events)
-		return;
+	int events = oss->irq_pending &
+	             (OSS_IP_IOPSCC | OSS_IP_SCSI | OSS_IP_IOPISM);
 
 #ifdef DEBUG_IRQS
 	if ((console_loglevel == 10) && !(events & OSS_IP_SCSI)) {
@@ -84,16 +76,20 @@ static void oss_irq(unsigned int irq, struct irq_desc *desc)
 			(int) oss->irq_pending);
 	}
 #endif
-	/* FIXME: how do you clear a pending IRQ?    */
 
-	if (events & OSS_IP_SOUND) {
-		oss->irq_pending &= ~OSS_IP_SOUND;
-		/* FIXME: call sound handler */
-	} else if (events & OSS_IP_SCSI) {
+	if (events & OSS_IP_IOPSCC) {
+		oss->irq_pending &= ~OSS_IP_IOPSCC;
+		generic_handle_irq(IRQ_MAC_SCC);
+	}
+
+	if (events & OSS_IP_SCSI) {
 		oss->irq_pending &= ~OSS_IP_SCSI;
 		generic_handle_irq(IRQ_MAC_SCSI);
-	} else {
-		/* FIXME: error check here? */
+	}
+
+	if (events & OSS_IP_IOPISM) {
+		oss->irq_pending &= ~OSS_IP_IOPISM;
+		generic_handle_irq(IRQ_MAC_ADB);
 	}
 }
 
@@ -132,14 +128,29 @@ static void oss_nubus_irq(unsigned int irq, struct irq_desc *desc)
 
 /*
  * Register the OSS and NuBus interrupt dispatchers.
+ *
+ * This IRQ mapping is laid out with two things in mind: first, we try to keep
+ * things on their own levels to avoid having to do double-dispatches. Second,
+ * the levels match as closely as possible the alternate IRQ mapping mode (aka
+ * "A/UX mode") available on some VIA machines.
  */
 
+#define OSS_IRQLEV_IOPISM    IRQ_AUTO_1
+#define OSS_IRQLEV_SCSI      IRQ_AUTO_2
+#define OSS_IRQLEV_NUBUS     IRQ_AUTO_3
+#define OSS_IRQLEV_IOPSCC    IRQ_AUTO_4
+#define OSS_IRQLEV_VIA1      IRQ_AUTO_6
+
 void __init oss_register_interrupts(void)
 {
+	irq_set_chained_handler(OSS_IRQLEV_IOPISM, oss_irq);
 	irq_set_chained_handler(OSS_IRQLEV_SCSI,   oss_irq);
 	irq_set_chained_handler(OSS_IRQLEV_NUBUS,  oss_nubus_irq);
-	irq_set_chained_handler(OSS_IRQLEV_SOUND, oss_irq);
+	irq_set_chained_handler(OSS_IRQLEV_IOPSCC, oss_irq);
 	irq_set_chained_handler(OSS_IRQLEV_VIA1,   via1_irq);
+
+	/* OSS_VIA1 gets enabled here because it has no machspec interrupt. */
+	oss->irq_level[OSS_VIA1] = IRQ_AUTO_6;
 }
 
 /*
@@ -158,13 +169,13 @@ void oss_irq_enable(int irq) {
 	switch(irq) {
 		case IRQ_MAC_SCC:
 			oss->irq_level[OSS_IOPSCC] = OSS_IRQLEV_IOPSCC;
-			break;
+			return;
 		case IRQ_MAC_ADB:
 			oss->irq_level[OSS_IOPISM] = OSS_IRQLEV_IOPISM;
-			break;
+			return;
 		case IRQ_MAC_SCSI:
 			oss->irq_level[OSS_SCSI] = OSS_IRQLEV_SCSI;
-			break;
+			return;
 		case IRQ_NUBUS_9:
 		case IRQ_NUBUS_A:
 		case IRQ_NUBUS_B:
@@ -173,13 +184,11 @@ void oss_irq_enable(int irq) {
 		case IRQ_NUBUS_E:
 			irq -= NUBUS_SOURCE_BASE;
 			oss->irq_level[irq] = OSS_IRQLEV_NUBUS;
-			break;
-#ifdef DEBUG_IRQUSE
-		default:
-			printk("%s unknown irq %d\n", __func__, irq);
-			break;
-#endif
+			return;
 	}
+
+	if (IRQ_SRC(irq) == 1)
+		via_irq_enable(irq);
 }
 
 /*
@@ -195,50 +204,14 @@ void oss_irq_disable(int irq) {
 #endif
 	switch(irq) {
 		case IRQ_MAC_SCC:
-			oss->irq_level[OSS_IOPSCC] = OSS_IRQLEV_DISABLED;
-			break;
-		case IRQ_MAC_ADB:
-			oss->irq_level[OSS_IOPISM] = OSS_IRQLEV_DISABLED;
-			break;
-		case IRQ_MAC_SCSI:
-			oss->irq_level[OSS_SCSI] = OSS_IRQLEV_DISABLED;
-			break;
-		case IRQ_NUBUS_9:
-		case IRQ_NUBUS_A:
-		case IRQ_NUBUS_B:
-		case IRQ_NUBUS_C:
-		case IRQ_NUBUS_D:
-		case IRQ_NUBUS_E:
-			irq -= NUBUS_SOURCE_BASE;
-			oss->irq_level[irq] = OSS_IRQLEV_DISABLED;
-			break;
-#ifdef DEBUG_IRQUSE
-		default:
-			printk("%s unknown irq %d\n", __func__, irq);
-			break;
-#endif
-	}
-}
-
-/*
- * Clear an OSS interrupt
- *
- * Not sure if this works or not but it's the only method I could
- * think of based on the contents of the mac_oss structure.
- */
-
-void oss_irq_clear(int irq) {
-	/* FIXME: how to do this on OSS? */
-	switch(irq) {
-		case IRQ_MAC_SCC:
-			oss->irq_pending &= ~OSS_IP_IOPSCC;
-			break;
+			oss->irq_level[OSS_IOPSCC] = 0;
+			return;
 		case IRQ_MAC_ADB:
-			oss->irq_pending &= ~OSS_IP_IOPISM;
-			break;
+			oss->irq_level[OSS_IOPISM] = 0;
+			return;
 		case IRQ_MAC_SCSI:
-			oss->irq_pending &= ~OSS_IP_SCSI;
-			break;
+			oss->irq_level[OSS_SCSI] = 0;
+			return;
 		case IRQ_NUBUS_9:
 		case IRQ_NUBUS_A:
 		case IRQ_NUBUS_B:
@@ -246,36 +219,10 @@ void oss_irq_clear(int irq) {
 		case IRQ_NUBUS_D:
 		case IRQ_NUBUS_E:
 			irq -= NUBUS_SOURCE_BASE;
-			oss->irq_pending &= ~(1 << irq);
-			break;
+			oss->irq_level[irq] = 0;
+			return;
 	}
-}
 
-/*
- * Check to see if a specific OSS interrupt is pending
- */
-
-int oss_irq_pending(int irq)
-{
-	switch(irq) {
-		case IRQ_MAC_SCC:
-			return oss->irq_pending & OSS_IP_IOPSCC;
-			break;
-		case IRQ_MAC_ADB:
-			return oss->irq_pending & OSS_IP_IOPISM;
-			break;
-		case IRQ_MAC_SCSI:
-			return oss->irq_pending & OSS_IP_SCSI;
-			break;
-		case IRQ_NUBUS_9:
-		case IRQ_NUBUS_A:
-		case IRQ_NUBUS_B:
-		case IRQ_NUBUS_C:
-		case IRQ_NUBUS_D:
-		case IRQ_NUBUS_E:
-			irq -= NUBUS_SOURCE_BASE;
-			return oss->irq_pending & (1 << irq);
-			break;
-	}
-	return 0;
+	if (IRQ_SRC(irq) == 1)
+		via_irq_disable(irq);
 }

arch/m68k/mac/psc.c

@@ -180,20 +180,3 @@ void psc_irq_disable(int irq) {
 #endif
 	psc_write_byte(pIER, 1 << irq_idx);
 }
-
-void psc_irq_clear(int irq) {
-	int irq_src	= IRQ_SRC(irq);
-	int irq_idx	= IRQ_IDX(irq);
-	int pIFR	= pIERbase + (irq_src << 4);
-
-	psc_write_byte(pIFR, 1 << irq_idx);
-}
-
-int psc_irq_pending(int irq)
-{
-	int irq_src	= IRQ_SRC(irq);
-	int irq_idx	= IRQ_IDX(irq);
-	int pIFR	= pIERbase + (irq_src << 4);
-
-	return psc_read_byte(pIFR) & (1 << irq_idx);
-}

arch/m68k/mvme16x/config.c

@@ -124,6 +124,163 @@ static void __init mvme16x_init_IRQ (void)
 #define PccSCCMICR	0x1d
 #define PccSCCTICR	0x1e
 #define PccSCCRICR	0x1f
+#define PccTPIACKR	0x25
+
+#ifdef CONFIG_EARLY_PRINTK
+
+/**** cd2401 registers ****/
+#define CD2401_ADDR	(0xfff45000)
+
+#define CyGFRCR         (0x81)
+#define CyCCR		(0x13)
+#define      CyCLR_CHAN		(0x40)
+#define      CyINIT_CHAN	(0x20)
+#define      CyCHIP_RESET	(0x10)
+#define      CyENB_XMTR		(0x08)
+#define      CyDIS_XMTR		(0x04)
+#define      CyENB_RCVR		(0x02)
+#define      CyDIS_RCVR		(0x01)
+#define CyCAR		(0xee)
+#define CyIER		(0x11)
+#define      CyMdmCh		(0x80)
+#define      CyRxExc		(0x20)
+#define      CyRxData		(0x08)
+#define      CyTxMpty		(0x02)
+#define      CyTxRdy		(0x01)
+#define CyLICR		(0x26)
+#define CyRISR		(0x89)
+#define      CyTIMEOUT		(0x80)
+#define      CySPECHAR		(0x70)
+#define      CyOVERRUN		(0x08)
+#define      CyPARITY		(0x04)
+#define      CyFRAME		(0x02)
+#define      CyBREAK		(0x01)
+#define CyREOIR		(0x84)
+#define CyTEOIR		(0x85)
+#define CyMEOIR		(0x86)
+#define      CyNOTRANS		(0x08)
+#define CyRFOC		(0x30)
+#define CyRDR		(0xf8)
+#define CyTDR		(0xf8)
+#define CyMISR		(0x8b)
+#define CyRISR		(0x89)
+#define CyTISR		(0x8a)
+#define CyMSVR1		(0xde)
+#define CyMSVR2		(0xdf)
+#define      CyDSR		(0x80)
+#define      CyDCD		(0x40)
+#define      CyCTS		(0x20)
+#define      CyDTR		(0x02)
+#define      CyRTS		(0x01)
+#define CyRTPRL		(0x25)
+#define CyRTPRH		(0x24)
+#define CyCOR1		(0x10)
+#define      CyPARITY_NONE	(0x00)
+#define      CyPARITY_E		(0x40)
+#define      CyPARITY_O		(0xC0)
+#define      Cy_5_BITS		(0x04)
+#define      Cy_6_BITS		(0x05)
+#define      Cy_7_BITS		(0x06)
+#define      Cy_8_BITS		(0x07)
+#define CyCOR2		(0x17)
+#define      CyETC		(0x20)
+#define      CyCtsAE		(0x02)
+#define CyCOR3		(0x16)
+#define      Cy_1_STOP		(0x02)
+#define      Cy_2_STOP		(0x04)
+#define CyCOR4		(0x15)
+#define      CyREC_FIFO		(0x0F)  /* Receive FIFO threshold */
+#define CyCOR5		(0x14)
+#define CyCOR6		(0x18)
+#define CyCOR7		(0x07)
+#define CyRBPR		(0xcb)
+#define CyRCOR		(0xc8)
+#define CyTBPR		(0xc3)
+#define CyTCOR		(0xc0)
+#define CySCHR1		(0x1f)
+#define CySCHR2 	(0x1e)
+#define CyTPR		(0xda)
+#define CyPILR1		(0xe3)
+#define CyPILR2		(0xe0)
+#define CyPILR3		(0xe1)
+#define CyCMR		(0x1b)
+#define      CyASYNC		(0x02)
+#define CyLICR          (0x26)
+#define CyLIVR          (0x09)
+#define CySCRL		(0x23)
+#define CySCRH		(0x22)
+#define CyTFTC		(0x80)
+
+static void cons_write(struct console *co, const char *str, unsigned count)
+{
+	volatile unsigned char *base_addr = (u_char *)CD2401_ADDR;
+	volatile u_char sink;
+	u_char ier;
+	int port;
+	u_char do_lf = 0;
+	int i = 0;
+
+	/* Ensure transmitter is enabled! */
+
+	port = 0;
+	base_addr[CyCAR] = (u_char)port;
+	while (base_addr[CyCCR])
+		;
+	base_addr[CyCCR] = CyENB_XMTR;
+
+	ier = base_addr[CyIER];
+	base_addr[CyIER] = CyTxMpty;
+
+	while (1) {
+		if (pcc2chip[PccSCCTICR] & 0x20)
+		{
+			/* We have a Tx int. Acknowledge it */
+			sink = pcc2chip[PccTPIACKR];
+			if ((base_addr[CyLICR] >> 2) == port) {
+				if (i == count) {
+					/* Last char of string is now output */
+					base_addr[CyTEOIR] = CyNOTRANS;
+					break;
+				}
+				if (do_lf) {
+					base_addr[CyTDR] = '\n';
+					str++;
+					i++;
+					do_lf = 0;
+				}
+				else if (*str == '\n') {
+					base_addr[CyTDR] = '\r';
+					do_lf = 1;
+				}
+				else {
+					base_addr[CyTDR] = *str++;
+					i++;
+				}
+				base_addr[CyTEOIR] = 0;
+			}
+			else
+				base_addr[CyTEOIR] = CyNOTRANS;
+		}
+	}
+
+	base_addr[CyIER] = ier;
+}
+
+static struct console cons_info =
+{
+	.name	= "sercon",
+	.write	= cons_write,
+	.flags	= CON_PRINTBUFFER | CON_BOOT,
+	.index	= -1,
+};
+
+static void __init mvme16x_early_console(void)
+{
+	register_console(&cons_info);
+
+	printk(KERN_INFO "MVME16x: early console registered\n");
+}
+#endif
 
 void __init config_mvme16x(void)
 {
@@ -183,6 +340,9 @@ void __init config_mvme16x(void)
 	pcc2chip[PccSCCMICR] = 0x10;
 	pcc2chip[PccSCCTICR] = 0x10;
 	pcc2chip[PccSCCRICR] = 0x10;
+#ifdef CONFIG_EARLY_PRINTK
+	mvme16x_early_console();
+#endif
     }
 }
 

drivers/block/swim.c

@@ -26,7 +26,6 @@
 #include <linux/delay.h>
 #include <linux/platform_device.h>
 
-#include <asm/macintosh.h>
 #include <asm/mac_via.h>
 
 #define CARDNAME "swim"

drivers/net/ethernet/natsemi/macsonic.c

@@ -142,8 +142,7 @@ static int macsonic_open(struct net_device* dev)
 {
 	int retval;
 
-	retval = request_irq(dev->irq, sonic_interrupt, IRQ_FLG_FAST,
-				"sonic", dev);
+	retval = request_irq(dev->irq, sonic_interrupt, 0, "sonic", dev);
 	if (retval) {
 		printk(KERN_ERR "%s: unable to get IRQ %d.\n",
 				dev->name, dev->irq);
@@ -154,8 +153,8 @@ static int macsonic_open(struct net_device* dev)
 	 * rupt as well, which must prevent re-entrance of the sonic handler.
 	 */
 	if (dev->irq == IRQ_AUTO_3) {
-		retval = request_irq(IRQ_NUBUS_9, macsonic_interrupt,
-					IRQ_FLG_FAST, "sonic", dev);
+		retval = request_irq(IRQ_NUBUS_9, macsonic_interrupt, 0,
+				     "sonic", dev);
 		if (retval) {
 			printk(KERN_ERR "%s: unable to get IRQ %d.\n",
 					dev->name, IRQ_NUBUS_9);

drivers/scsi/mac_esp.c

@@ -25,6 +25,7 @@
 #include <asm/dma.h>
 #include <asm/macints.h>
 #include <asm/macintosh.h>
+#include <asm/mac_via.h>
 
 #include <scsi/scsi_host.h>
 
@@ -149,7 +150,7 @@ static inline int mac_esp_wait_for_dreq(struct esp *esp)
 
 	do {
 		if (mep->pdma_regs == NULL) {
-			if (mac_irq_pending(IRQ_MAC_SCSIDRQ))
+			if (via2_scsi_drq_pending())
 				return 0;
 		} else {
 			if (nubus_readl(mep->pdma_regs) & 0x200)