Skip to content

L
linux
Commit 3599a8af authored by Gabriel Fernandez's avatar Gabriel Fernandez Committed by Alexandre Torgue
Browse files
Options

ARM: dts: stm32: Enable stm32mp1 clock driver on stm32mp157c 

This patch enables stm32mp1 clock driver.
Signed-off-by: default avatarGabriel Fernandez <gabriel.fernandez@st.com>
Signed-off-by: default avatarAlexandre Torgue <alexandre.torgue@st.com>
parent 60cc43fc
Show whitespace changes
Inline Side-by-side
Showing with 28 additions and 44 deletions
arch/arm/boot/dts/stm32mp157-pinctrl.dtsi
View file @ 3599a8af
......@@ -20,7 +20,7 @@ gpioa: gpio@50002000 {
interrupt-controller;
#interrupt-cells = <2>;
reg = <0x0 0x400>;
clocks = <&clk_pll3_p>;
clocks = <&rcc GPIOA>;
st,bank-name = "GPIOA";
ngpios = <16>;
gpio-ranges = <&pinctrl 0 0 16>;
......@@ -32,7 +32,7 @@ gpiob: gpio@50003000 {
interrupt-controller;
#interrupt-cells = <2>;
reg = <0x1000 0x400>;
clocks = <&clk_pll3_p>;
clocks = <&rcc GPIOB>;
st,bank-name = "GPIOB";
ngpios = <16>;
gpio-ranges = <&pinctrl 0 16 16>;
......@@ -44,7 +44,7 @@ gpioc: gpio@50004000 {
interrupt-controller;
#interrupt-cells = <2>;
reg = <0x2000 0x400>;
clocks = <&clk_pll3_p>;
clocks = <&rcc GPIOC>;
st,bank-name = "GPIOC";
ngpios = <16>;
gpio-ranges = <&pinctrl 0 32 16>;
......@@ -56,7 +56,7 @@ gpiod: gpio@50005000 {
interrupt-controller;
#interrupt-cells = <2>;
reg = <0x3000 0x400>;
clocks = <&clk_pll3_p>;
clocks = <&rcc GPIOD>;
st,bank-name = "GPIOD";
ngpios = <16>;
gpio-ranges = <&pinctrl 0 48 16>;
......@@ -68,7 +68,7 @@ gpioe: gpio@50006000 {
interrupt-controller;
#interrupt-cells = <2>;
reg = <0x4000 0x400>;
clocks = <&clk_pll3_p>;
clocks = <&rcc GPIOE>;
st,bank-name = "GPIOE";
ngpios = <16>;
gpio-ranges = <&pinctrl 0 64 16>;
......@@ -80,7 +80,7 @@ gpiof: gpio@50007000 {
interrupt-controller;
#interrupt-cells = <2>;
reg = <0x5000 0x400>;
clocks = <&clk_pll3_p>;
clocks = <&rcc GPIOF>;
st,bank-name = "GPIOF";
ngpios = <16>;
gpio-ranges = <&pinctrl 0 80 16>;
......@@ -92,7 +92,7 @@ gpiog: gpio@50008000 {
interrupt-controller;
#interrupt-cells = <2>;
reg = <0x6000 0x400>;
clocks = <&clk_pll3_p>;
clocks = <&rcc GPIOG>;
st,bank-name = "GPIOG";
ngpios = <16>;
gpio-ranges = <&pinctrl 0 96 16>;
......@@ -104,7 +104,7 @@ gpioh: gpio@50009000 {
interrupt-controller;
#interrupt-cells = <2>;
reg = <0x7000 0x400>;
clocks = <&clk_pll3_p>;
clocks = <&rcc GPIOH>;
st,bank-name = "GPIOH";
ngpios = <16>;
gpio-ranges = <&pinctrl 0 112 16>;
......@@ -116,7 +116,7 @@ gpioi: gpio@5000a000 {
interrupt-controller;
#interrupt-cells = <2>;
reg = <0x8000 0x400>;
clocks = <&clk_pll3_p>;
clocks = <&rcc GPIOI>;
st,bank-name = "GPIOI";
ngpios = <16>;
gpio-ranges = <&pinctrl 0 128 16>;
......@@ -128,7 +128,7 @@ gpioj: gpio@5000b000 {
interrupt-controller;
#interrupt-cells = <2>;
reg = <0x9000 0x400>;
clocks = <&clk_pll3_p>;
clocks = <&rcc GPIOJ>;
st,bank-name = "GPIOJ";
ngpios = <16>;
gpio-ranges = <&pinctrl 0 144 16>;
......@@ -140,7 +140,7 @@ gpiok: gpio@5000c000 {
interrupt-controller;
#interrupt-cells = <2>;
reg = <0xa000 0x400>;
clocks = <&clk_pll3_p>;
clocks = <&rcc GPIOK>;
st,bank-name = "GPIOK";
ngpios = <8>;
gpio-ranges = <&pinctrl 0 160 8>;
......@@ -174,7 +174,7 @@ gpioz: gpio@54004000 {
interrupt-controller;
#interrupt-cells = <2>;
reg = <0 0x400>;
clocks = <&clk_pll2_p>;
clocks = <&rcc GPIOZ>;
st,bank-name = "GPIOZ";
st,bank-ioport = <11>;
ngpios = <8>;
......
arch/arm/boot/dts/stm32mp157c.dtsi
View file @ 3599a8af
......@@ -4,6 +4,7 @@
* Author: Ludovic Barre <ludovic.barre@st.com> for STMicroelectronics.
*/
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/clock/stm32mp1-clks.h>
/ {
#address-cells = <1>;
......@@ -71,12 +72,6 @@ clk_hse: clk-hse {
clock-frequency = <24000000>;
};
clk_pll_per: clk-pll-per {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <64000000>;
};
clk_hsi: clk-hsi {
#clock-cells = <0>;
compatible = "fixed-clock";
......@@ -100,24 +95,6 @@ clk_csi: clk-csi {
compatible = "fixed-clock";
clock-frequency = <4000000>;
};
clk_pclk1: clk-pclk1 {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <86000000>;
};
clk_pll3_p: clk-pll3_p {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <172000000>;
};
clk_pll2_p: clk-pll2_p {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <264000000>;
};
};
soc {
......@@ -131,7 +108,7 @@ usart2: serial@4000e000 {
compatible = "st,stm32h7-uart";
reg = <0x4000e000 0x400>;
interrupts = <GIC_SPI 38 IRQ_TYPE_NONE>;
clocks = <&clk_pclk1>;
clocks = <&rcc USART2_K>;
status = "disabled";
};
......@@ -139,7 +116,7 @@ usart3: serial@4000f000 {
compatible = "st,stm32h7-uart";
reg = <0x4000f000 0x400>;
interrupts = <GIC_SPI 39 IRQ_TYPE_NONE>;
clocks = <&clk_pclk1>;
clocks = <&rcc USART3_K>;
status = "disabled";
};
......@@ -147,7 +124,7 @@ uart4: serial@40010000 {
compatible = "st,stm32h7-uart";
reg = <0x40010000 0x400>;
interrupts = <GIC_SPI 52 IRQ_TYPE_NONE>;
clocks = <&clk_pclk1>;
clocks = <&rcc UART4_K>;
status = "disabled";
};
......@@ -155,7 +132,7 @@ uart5: serial@40011000 {
compatible = "st,stm32h7-uart";
reg = <0x40011000 0x400>;
interrupts = <GIC_SPI 53 IRQ_TYPE_NONE>;
clocks = <&clk_pclk1>;
clocks = <&rcc UART5_K>;
status = "disabled";
};
......@@ -163,7 +140,7 @@ uart7: serial@40018000 {
compatible = "st,stm32h7-uart";
reg = <0x40018000 0x400>;
interrupts = <GIC_SPI 82 IRQ_TYPE_NONE>;
clocks = <&clk_pclk1>;
clocks = <&rcc UART7_K>;
status = "disabled";
};
......@@ -171,7 +148,7 @@ uart8: serial@40019000 {
compatible = "st,stm32h7-uart";
reg = <0x40019000 0x400>;
interrupts = <GIC_SPI 83 IRQ_TYPE_NONE>;
clocks = <&clk_pclk1>;
clocks = <&rcc UART8_K>;
status = "disabled";
};
......@@ -179,15 +156,22 @@ usart6: serial@44003000 {
compatible = "st,stm32h7-uart";
reg = <0x44003000 0x400>;
interrupts = <GIC_SPI 71 IRQ_TYPE_NONE>;
clocks = <&clk_pclk1>;
clocks = <&rcc USART6_K>;
status = "disabled";
};
rcc: rcc@50000000 {
compatible = "st,stm32mp1-rcc", "syscon";
reg = <0x50000000 0x1000>;
#clock-cells = <1>;
#reset-cells = <1>;
};
usart1: serial@5c000000 {
compatible = "st,stm32h7-uart";
reg = <0x5c000000 0x400>;
interrupts = <GIC_SPI 37 IRQ_TYPE_NONE>;
clocks = <&clk_pclk1>;
clocks = <&rcc USART1_K>;
status = "disabled";
};
};
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7