Merge branch 'for-2.6.25' of...

Merge branch 'for-2.6.25' of master.kernel.org:/pub/scm/linux/kernel/git/jwboyer/powerpc-4xx into merge

arch/powerpc/boot/cuboot-bamboo.c

@@ -17,6 +17,7 @@
 #include "44x.h"
 #include "cuboot.h"
 
+#define TARGET_4xx
 #define TARGET_44x
 #include "ppcboot.h"
 

arch/powerpc/boot/cuboot-ebony.c

@@ -17,6 +17,7 @@
 #include "44x.h"
 #include "cuboot.h"
 
+#define TARGET_4xx
 #define TARGET_44x
 #include "ppcboot.h"
 

arch/powerpc/boot/cuboot-katmai.c

@@ -22,6 +22,7 @@
 #include "44x.h"
 #include "cuboot.h"
 
+#define TARGET_4xx
 #define TARGET_44x
 #include "ppcboot.h"
 

arch/powerpc/boot/cuboot-taishan.c

@@ -21,7 +21,9 @@
 #include "dcr.h"
 #include "4xx.h"
 
+#define TARGET_4xx
 #define TARGET_44x
+#define TARGET_440GX
 #include "ppcboot.h"
 
 static bd_t bd;

arch/powerpc/boot/cuboot-warp.c

@@ -11,6 +11,7 @@
 #include "4xx.h"
 #include "cuboot.h"
 
+#define TARGET_4xx
 #define TARGET_44x
 #include "ppcboot.h"
 

arch/powerpc/boot/dts/haleakala.dts

@@ -235,7 +235,7 @@ PCIE0: pciex@0a0000000 {
 			#interrupt-cells = <1>;
 			#size-cells = <2>;
 			#address-cells = <3>;
-			compatible = "ibm,plb-pciex-405exr", "ibm,plb-pciex";
+			compatible = "ibm,plb-pciex-405ex", "ibm,plb-pciex";
 			primary;
 			port = <0>; /* port number */
 			reg = <a0000000 20000000	/* Config space access */

arch/powerpc/boot/dts/katmai.dts

@@ -38,8 +38,8 @@ cpu@0 {
 			timebase-frequency = <0>; /* Filled in by zImage */
 			i-cache-line-size = <20>;
 			d-cache-line-size = <20>;
-			i-cache-size = <20000>;
-			d-cache-size = <20000>;
+			i-cache-size = <8000>;
+			d-cache-size = <8000>;
 			dcr-controller;
 			dcr-access-method = "native";
 		};

drivers/char/xilinx_hwicap/buffer_icap.c

@@ -73,8 +73,8 @@
 #define XHI_BUFFER_START 0
 
 /**
- * buffer_icap_get_status: Get the contents of the status register.
- * @parameter base_address: is the base address of the device
+ * buffer_icap_get_status - Get the contents of the status register.
+ * @base_address: is the base address of the device
  *
  * The status register contains the ICAP status and the done bit.
  *
@@ -94,9 +94,9 @@ static inline u32 buffer_icap_get_status(void __iomem *base_address)
 }
 
 /**
- * buffer_icap_get_bram: Reads data from the storage buffer bram.
- * @parameter base_address: contains the base address of the component.
- * @parameter offset: The word offset from which the data should be read.
+ * buffer_icap_get_bram - Reads data from the storage buffer bram.
+ * @base_address: contains the base address of the component.
+ * @offset: The word offset from which the data should be read.
  *
  * A bram is used as a configuration memory cache.  One frame of data can
  * be stored in this "storage buffer".
@@ -108,8 +108,8 @@ static inline u32 buffer_icap_get_bram(void __iomem *base_address,
 }
 
 /**
- * buffer_icap_busy: Return true if the icap device is busy
- * @parameter base_address: is the base address of the device
+ * buffer_icap_busy - Return true if the icap device is busy
+ * @base_address: is the base address of the device
  *
  * The queries the low order bit of the status register, which
  * indicates whether the current configuration or readback operation
@@ -121,8 +121,8 @@ static inline bool buffer_icap_busy(void __iomem *base_address)
 }
 
 /**
- * buffer_icap_busy: Return true if the icap device is not busy
- * @parameter base_address: is the base address of the device
+ * buffer_icap_busy - Return true if the icap device is not busy
+ * @base_address: is the base address of the device
  *
  * The queries the low order bit of the status register, which
  * indicates whether the current configuration or readback operation
@@ -134,9 +134,9 @@ static inline bool buffer_icap_done(void __iomem *base_address)
 }
 
 /**
- * buffer_icap_set_size: Set the size register.
- * @parameter base_address: is the base address of the device
- * @parameter data: The size in bytes.
+ * buffer_icap_set_size - Set the size register.
+ * @base_address: is the base address of the device
+ * @data: The size in bytes.
  *
  * The size register holds the number of 8 bit bytes to transfer between
  * bram and the icap (or icap to bram).
@@ -148,9 +148,9 @@ static inline void buffer_icap_set_size(void __iomem *base_address,
 }
 
 /**
- * buffer_icap_mSetoffsetReg: Set the bram offset register.
- * @parameter base_address: contains the base address of the device.
- * @parameter data: is the value to be written to the data register.
+ * buffer_icap_set_offset - Set the bram offset register.
+ * @base_address: contains the base address of the device.
+ * @data: is the value to be written to the data register.
  *
  * The bram offset register holds the starting bram address to transfer
  * data from during configuration or write data to during readback.
@@ -162,9 +162,9 @@ static inline void buffer_icap_set_offset(void __iomem *base_address,
 }
 
 /**
- * buffer_icap_set_rnc: Set the RNC (Readback not Configure) register.
- * @parameter base_address: contains the base address of the device.
- * @parameter data: is the value to be written to the data register.
+ * buffer_icap_set_rnc - Set the RNC (Readback not Configure) register.
+ * @base_address: contains the base address of the device.
+ * @data: is the value to be written to the data register.
  *
  * The RNC register determines the direction of the data transfer.  It
  * controls whether a configuration or readback take place.  Writing to
@@ -178,10 +178,10 @@ static inline void buffer_icap_set_rnc(void __iomem *base_address,
 }
 
 /**
- * buffer_icap_set_bram: Write data to the storage buffer bram.
- * @parameter base_address: contains the base address of the component.
- * @parameter offset: The word offset at which the data should be written.
- * @parameter data: The value to be written to the bram offset.
+ * buffer_icap_set_bram - Write data to the storage buffer bram.
+ * @base_address: contains the base address of the component.
+ * @offset: The word offset at which the data should be written.
+ * @data: The value to be written to the bram offset.
  *
  * A bram is used as a configuration memory cache.  One frame of data can
  * be stored in this "storage buffer".
@@ -193,10 +193,10 @@ static inline void buffer_icap_set_bram(void __iomem *base_address,
 }
 
 /**
- * buffer_icap_device_read: Transfer bytes from ICAP to the storage buffer.
- * @parameter drvdata: a pointer to the drvdata.
- * @parameter offset: The storage buffer start address.
- * @parameter count: The number of words (32 bit) to read from the
+ * buffer_icap_device_read - Transfer bytes from ICAP to the storage buffer.
+ * @drvdata: a pointer to the drvdata.
+ * @offset: The storage buffer start address.
+ * @count: The number of words (32 bit) to read from the
  *           device (ICAP).
  **/
 static int buffer_icap_device_read(struct hwicap_drvdata *drvdata,
@@ -227,10 +227,10 @@ static int buffer_icap_device_read(struct hwicap_drvdata *drvdata,
 };
 
 /**
- * buffer_icap_device_write: Transfer bytes from ICAP to the storage buffer.
- * @parameter drvdata: a pointer to the drvdata.
- * @parameter offset: The storage buffer start address.
- * @parameter count: The number of words (32 bit) to read from the
+ * buffer_icap_device_write - Transfer bytes from ICAP to the storage buffer.
+ * @drvdata: a pointer to the drvdata.
+ * @offset: The storage buffer start address.
+ * @count: The number of words (32 bit) to read from the
  *           device (ICAP).
  **/
 static int buffer_icap_device_write(struct hwicap_drvdata *drvdata,
@@ -261,8 +261,8 @@ static int buffer_icap_device_write(struct hwicap_drvdata *drvdata,
 };
 
 /**
- * buffer_icap_reset: Reset the logic of the icap device.
- * @parameter drvdata: a pointer to the drvdata.
+ * buffer_icap_reset - Reset the logic of the icap device.
+ * @drvdata: a pointer to the drvdata.
  *
  * Writing to the status register resets the ICAP logic in an internal
  * version of the core.  For the version of the core published in EDK,
@@ -274,10 +274,10 @@ void buffer_icap_reset(struct hwicap_drvdata *drvdata)
 }
 
 /**
- * buffer_icap_set_configuration: Load a partial bitstream from system memory.
- * @parameter drvdata: a pointer to the drvdata.
- * @parameter data: Kernel address of the partial bitstream.
- * @parameter size: the size of the partial bitstream in 32 bit words.
+ * buffer_icap_set_configuration - Load a partial bitstream from system memory.
+ * @drvdata: a pointer to the drvdata.
+ * @data: Kernel address of the partial bitstream.
+ * @size: the size of the partial bitstream in 32 bit words.
  **/
 int buffer_icap_set_configuration(struct hwicap_drvdata *drvdata, u32 *data,
 			     u32 size)
@@ -333,10 +333,10 @@ int buffer_icap_set_configuration(struct hwicap_drvdata *drvdata, u32 *data,
 };
 
 /**
- * buffer_icap_get_configuration: Read configuration data from the device.
- * @parameter drvdata: a pointer to the drvdata.
- * @parameter data: Address of the data representing the partial bitstream
- * @parameter size: the size of the partial bitstream in 32 bit words.
+ * buffer_icap_get_configuration - Read configuration data from the device.
+ * @drvdata: a pointer to the drvdata.
+ * @data: Address of the data representing the partial bitstream
+ * @size: the size of the partial bitstream in 32 bit words.
  **/
 int buffer_icap_get_configuration(struct hwicap_drvdata *drvdata, u32 *data,
 			     u32 size)

drivers/char/xilinx_hwicap/fifo_icap.c

@@ -94,9 +94,9 @@
 
 
 /**
- * fifo_icap_fifo_write: Write data to the write FIFO.
- * @parameter drvdata: a pointer to the drvdata.
- * @parameter data: the 32-bit value to be written to the FIFO.
+ * fifo_icap_fifo_write - Write data to the write FIFO.
+ * @drvdata: a pointer to the drvdata.
+ * @data: the 32-bit value to be written to the FIFO.
  *
  * This function will silently fail if the fifo is full.
  **/
@@ -108,8 +108,8 @@ static inline void fifo_icap_fifo_write(struct hwicap_drvdata *drvdata,
 }
 
 /**
- * fifo_icap_fifo_read: Read data from the Read FIFO.
- * @parameter drvdata: a pointer to the drvdata.
+ * fifo_icap_fifo_read - Read data from the Read FIFO.
+ * @drvdata: a pointer to the drvdata.
  *
  * This function will silently fail if the fifo is empty.
  **/
@@ -121,9 +121,9 @@ static inline u32 fifo_icap_fifo_read(struct hwicap_drvdata *drvdata)
 }
 
 /**
- * fifo_icap_set_read_size: Set the the size register.
- * @parameter drvdata: a pointer to the drvdata.
- * @parameter data: the size of the following read transaction, in words.
+ * fifo_icap_set_read_size - Set the the size register.
+ * @drvdata: a pointer to the drvdata.
+ * @data: the size of the following read transaction, in words.
  **/
 static inline void fifo_icap_set_read_size(struct hwicap_drvdata *drvdata,
 		u32 data)
@@ -132,8 +132,8 @@ static inline void fifo_icap_set_read_size(struct hwicap_drvdata *drvdata,
 }
 
 /**
- * fifo_icap_start_config: Initiate a configuration (write) to the device.
- * @parameter drvdata: a pointer to the drvdata.
+ * fifo_icap_start_config - Initiate a configuration (write) to the device.
+ * @drvdata: a pointer to the drvdata.
  **/
 static inline void fifo_icap_start_config(struct hwicap_drvdata *drvdata)
 {
@@ -142,8 +142,8 @@ static inline void fifo_icap_start_config(struct hwicap_drvdata *drvdata)
 }
 
 /**
- * fifo_icap_start_readback: Initiate a readback from the device.
- * @parameter drvdata: a pointer to the drvdata.
+ * fifo_icap_start_readback - Initiate a readback from the device.
+ * @drvdata: a pointer to the drvdata.
  **/
 static inline void fifo_icap_start_readback(struct hwicap_drvdata *drvdata)
 {
@@ -152,8 +152,8 @@ static inline void fifo_icap_start_readback(struct hwicap_drvdata *drvdata)
 }
 
 /**
- * fifo_icap_busy: Return true if the ICAP is still processing a transaction.
- * @parameter drvdata: a pointer to the drvdata.
+ * fifo_icap_busy - Return true if the ICAP is still processing a transaction.
+ * @drvdata: a pointer to the drvdata.
  **/
 static inline u32 fifo_icap_busy(struct hwicap_drvdata *drvdata)
 {
@@ -163,8 +163,8 @@ static inline u32 fifo_icap_busy(struct hwicap_drvdata *drvdata)
 }
 
 /**
- * fifo_icap_write_fifo_vacancy: Query the write fifo available space.
- * @parameter drvdata: a pointer to the drvdata.
+ * fifo_icap_write_fifo_vacancy - Query the write fifo available space.
+ * @drvdata: a pointer to the drvdata.
  *
  * Return the number of words that can be safely pushed into the write fifo.
  **/
@@ -175,8 +175,8 @@ static inline u32 fifo_icap_write_fifo_vacancy(
 }
 
 /**
- * fifo_icap_read_fifo_occupancy: Query the read fifo available data.
- * @parameter drvdata: a pointer to the drvdata.
+ * fifo_icap_read_fifo_occupancy - Query the read fifo available data.
+ * @drvdata: a pointer to the drvdata.
  *
  * Return the number of words that can be safely read from the read fifo.
  **/
@@ -187,11 +187,11 @@ static inline u32 fifo_icap_read_fifo_occupancy(
 }
 
 /**
- * fifo_icap_set_configuration: Send configuration data to the ICAP.
- * @parameter drvdata: a pointer to the drvdata.
- * @parameter frame_buffer: a pointer to the data to be written to the
+ * fifo_icap_set_configuration - Send configuration data to the ICAP.
+ * @drvdata: a pointer to the drvdata.
+ * @frame_buffer: a pointer to the data to be written to the
  *		ICAP device.
- * @parameter num_words: the number of words (32 bit) to write to the ICAP
+ * @num_words: the number of words (32 bit) to write to the ICAP
  *		device.
 
  * This function writes the given user data to the Write FIFO in
@@ -266,10 +266,10 @@ int fifo_icap_set_configuration(struct hwicap_drvdata *drvdata,
 }
 
 /**
- * fifo_icap_get_configuration: Read configuration data from the device.
- * @parameter drvdata: a pointer to the drvdata.
- * @parameter data: Address of the data representing the partial bitstream
- * @parameter size: the size of the partial bitstream in 32 bit words.
+ * fifo_icap_get_configuration - Read configuration data from the device.
+ * @drvdata: a pointer to the drvdata.
+ * @data: Address of the data representing the partial bitstream
+ * @size: the size of the partial bitstream in 32 bit words.
  *
  * This function reads the specified number of words from the ICAP device in
  * the polled mode.
@@ -335,8 +335,8 @@ int fifo_icap_get_configuration(struct hwicap_drvdata *drvdata,
 }
 
 /**
- * buffer_icap_reset: Reset the logic of the icap device.
- * @parameter drvdata: a pointer to the drvdata.
+ * buffer_icap_reset - Reset the logic of the icap device.
+ * @drvdata: a pointer to the drvdata.
  *
  * This function forces the software reset of the complete HWICAP device.
  * All the registers will return to the default value and the FIFO is also
@@ -360,8 +360,8 @@ void fifo_icap_reset(struct hwicap_drvdata *drvdata)
 }
 
 /**
- * fifo_icap_flush_fifo: This function flushes the FIFOs in the device.
- * @parameter drvdata: a pointer to the drvdata.
+ * fifo_icap_flush_fifo - This function flushes the FIFOs in the device.
+ * @drvdata: a pointer to the drvdata.
  */
 void fifo_icap_flush_fifo(struct hwicap_drvdata *drvdata)
 {

drivers/char/xilinx_hwicap/xilinx_hwicap.h

@@ -48,9 +48,9 @@ struct hwicap_drvdata {
 	u8 write_buffer[4];
 	u32 read_buffer_in_use;	  /* Always in [0,3] */
 	u8 read_buffer[4];
-	u32 mem_start;		  /* phys. address of the control registers */
-	u32 mem_end;		  /* phys. address of the control registers */
-	u32 mem_size;
+	resource_size_t mem_start;/* phys. address of the control registers */
+	resource_size_t mem_end;  /* phys. address of the control registers */
+	resource_size_t mem_size;
 	void __iomem *base_address;/* virt. address of the control registers */
 
 	struct device *dev;
@@ -61,7 +61,7 @@ struct hwicap_drvdata {
 	const struct config_registers *config_regs;
 	void *private_data;
 	bool is_open;
-	struct semaphore sem;
+	struct mutex sem;
 };
 
 struct hwicap_driver_config {
@@ -164,29 +164,29 @@ struct config_registers {
 #define XHI_DISABLED_AUTO_CRC       0x0000DEFCUL
 
 /**
- * hwicap_type_1_read: Generates a Type 1 read packet header.
- * @parameter: Register is the address of the register to be read back.
+ * hwicap_type_1_read - Generates a Type 1 read packet header.
+ * @reg: is the address of the register to be read back.
  *
  * Generates a Type 1 read packet header, which is used to indirectly
  * read registers in the configuration logic.  This packet must then
  * be sent through the icap device, and a return packet received with
  * the information.
  **/
-static inline u32 hwicap_type_1_read(u32 Register)
+static inline u32 hwicap_type_1_read(u32 reg)
 {
 	return (XHI_TYPE_1 << XHI_TYPE_SHIFT) |
-		(Register << XHI_REGISTER_SHIFT) |
+		(reg << XHI_REGISTER_SHIFT) |
 		(XHI_OP_READ << XHI_OP_SHIFT);
 }
 
 /**
- * hwicap_type_1_write: Generates a Type 1 write packet header
- * @parameter: Register is the address of the register to be read back.
+ * hwicap_type_1_write - Generates a Type 1 write packet header
+ * @reg: is the address of the register to be read back.
  **/
-static inline u32 hwicap_type_1_write(u32 Register)
+static inline u32 hwicap_type_1_write(u32 reg)
 {
 	return (XHI_TYPE_1 << XHI_TYPE_SHIFT) |
-		(Register << XHI_REGISTER_SHIFT) |
+		(reg << XHI_REGISTER_SHIFT) |
 		(XHI_OP_WRITE << XHI_OP_SHIFT);
 }