selftests: forwarding: Add test for dual VxLAN bridge

Configure VxLAN with an 802.1ad bridge and VxLAN with an 802.1d bridge
at the same time in same switch, verify that traffic passed as expected.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

tools/testing/selftests/net/forwarding/dual_vxlan_bridge.sh

+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+# +--------------------+                               +----------------------+
+# | H1 (vrf)           |                               |             H2 (vrf) |
+# |    + h1.10         |                               |  + h2.20             |
+# |    | 192.0.2.1/28  |                               |  | 192.0.2.2/28      |
+# |    |               |                               |  |                   |
+# |    + $h1           |                               |  + $h2               |
+# |    |               |                               |  |                   |
+# +----|---------------+                               +--|-------------------+
+#      |                                                  |
+# +----|--------------------------------------------------|--------------------+
+# | SW |                                                  |                    |
+# | +--|-------------------------------+ +----------------|------------------+ |
+# | |  + $swp1         BR1 (802.1ad)   | | BR2 (802.1d)   + $swp2            | |
+# | |    vid 100 pvid untagged         | |                |                  | |
+# | |                                  | |                + $swp2.20         | |
+# | |                                  | |                                   | |
+# | |  + vx100 (vxlan)                 | |  + vx200 (vxlan)                  | |
+# | |    local 192.0.2.17              | |    local 192.0.2.17               | |
+# | |    remote 192.0.2.34             | |    remote 192.0.2.50              | |
+# | |    id 1000 dstport $VXPORT       | |    id 2000 dstport $VXPORT        | |
+# | |    vid 100 pvid untagged         | |                                   | |
+# | +--------------------------------- + +-----------------------------------+ |
+# |                                                                            |
+# |  192.0.2.32/28 via 192.0.2.18                                              |
+# |  192.0.2.48/28 via 192.0.2.18                                              |
+# |                                                                            |
+# |    + $rp1                                                                  |
+# |    | 192.0.2.17/28                                                         |
+# +----|-----------------------------------------------------------------------+
+#      |
+# +----|--------------------------------------------------------+
+# |    |                                             VRP2 (vrf) |
+# |    + $rp2                                                   |
+# |      192.0.2.18/28                                          |
+# |                                                             |   (maybe) HW
+# =============================================================================
+# |                                                             |  (likely) SW
+# |    + v1 (veth)                             + v3 (veth)      |
+# |    | 192.0.2.33/28                         | 192.0.2.49/28  |
+# +----|---------------------------------------|----------------+
+#      |                                       |
+# +----|------------------------------+   +----|------------------------------+
+# |    + v2 (veth)        NS1 (netns) |   |    + v4 (veth)        NS2 (netns) |
+# |      192.0.2.34/28                |   |      192.0.2.50/28                |
+# |                                   |   |                                   |
+# |   192.0.2.16/28 via 192.0.2.33    |   |   192.0.2.16/28 via 192.0.2.49    |
+# |   192.0.2.50/32 via 192.0.2.33    |   |   192.0.2.34/32 via 192.0.2.49    |
+# |                                   |   |                                   |
+# | +-------------------------------+ |   | +-------------------------------+ |
+# | |                 BR3 (802.1ad) | |   | |                  BR3 (802.1d) | |
+# | |  + vx100 (vxlan)              | |   | |  + vx200 (vxlan)              | |
+# | |    local 192.0.2.34           | |   | |    local 192.0.2.50           | |
+# | |    remote 192.0.2.17          | |   | |    remote 192.0.2.17          | |
+# | |    remote 192.0.2.50          | |   | |    remote 192.0.2.34          | |
+# | |    id 1000 dstport $VXPORT    | |   | |    id 2000 dstport $VXPORT    | |
+# | |    vid 100 pvid untagged      | |   | |                               | |
+# | |                               | |   | |  + w1.20                      | |
+# | |                               | |   | |  |                            | |
+# | |  + w1 (veth)                  | |   | |  + w1 (veth)                  | |
+# | |  | vid 100 pvid untagged      | |   | |  |                            | |
+# | +--|----------------------------+ |   | +--|----------------------------+ |
+# |    |                              |   |    |                              |
+# | +--|----------------------------+ |   | +--|----------------------------+ |
+# | |  |                  VW2 (vrf) | |   | |  |                  VW2 (vrf) | |
+# | |  + w2 (veth)                  | |   | |  + w2 (veth)                  | |
+# | |  |                            | |   | |  |                            | |
+# | |  |                            | |   | |  |                            | |
+# | |  + w2.10                      | |   | |  + w2.20                      | |
+# | |    192.0.2.3/28               | |   | |    192.0.2.4/28               | |
+# | +-------------------------------+ |   | +-------------------------------+ |
+# +-----------------------------------+   +-----------------------------------+
+
+: ${VXPORT:=4789}
+export VXPORT
+
+: ${ALL_TESTS:="
+	ping_ipv4
+    "}
+
+NUM_NETIFS=6
+source lib.sh
+
+h1_create()
+{
+	simple_if_init $h1
+	tc qdisc add dev $h1 clsact
+	vlan_create $h1 10 v$h1 192.0.2.1/28
+}
+
+h1_destroy()
+{
+	vlan_destroy $h1 10
+	tc qdisc del dev $h1 clsact
+	simple_if_fini $h1
+}
+
+h2_create()
+{
+	simple_if_init $h2
+	tc qdisc add dev $h2 clsact
+	vlan_create $h2 20 v$h2 192.0.2.2/28
+}
+
+h2_destroy()
+{
+	vlan_destroy $h2 20
+	tc qdisc del dev $h2 clsact
+	simple_if_fini $h2
+}
+
+rp1_set_addr()
+{
+	ip address add dev $rp1 192.0.2.17/28
+
+	ip route add 192.0.2.32/28 nexthop via 192.0.2.18
+	ip route add 192.0.2.48/28 nexthop via 192.0.2.18
+}
+
+rp1_unset_addr()
+{
+	ip route del 192.0.2.48/28 nexthop via 192.0.2.18
+	ip route del 192.0.2.32/28 nexthop via 192.0.2.18
+
+	ip address del dev $rp1 192.0.2.17/28
+}
+
+switch_create()
+{
+	#### BR1 ####
+	ip link add name br1 type bridge vlan_filtering 1 \
+		vlan_protocol 802.1ad vlan_default_pvid 0 mcast_snooping 0
+	# Make sure the bridge uses the MAC address of the local port and not
+	# that of the VxLAN's device.
+	ip link set dev br1 address $(mac_get $swp1)
+	ip link set dev br1 up
+
+	#### BR2 ####
+	ip link add name br2 type bridge vlan_filtering 0 mcast_snooping 0
+	# Make sure the bridge uses the MAC address of the local port and not
+	# that of the VxLAN's device.
+	ip link set dev br2 address $(mac_get $swp2)
+	ip link set dev br2 up
+
+	ip link set dev $rp1 up
+	rp1_set_addr
+
+	#### VX100 ####
+	ip link add name vx100 type vxlan id 1000 local 192.0.2.17 \
+		dstport "$VXPORT" nolearning noudpcsum tos inherit ttl 100
+	ip link set dev vx100 up
+
+	ip link set dev vx100 master br1
+	bridge vlan add vid 100 dev vx100 pvid untagged
+
+	ip link set dev $swp1 master br1
+	ip link set dev $swp1 up
+	bridge vlan add vid 100 dev $swp1 pvid untagged
+
+	#### VX200 ####
+	ip link add name vx200 type vxlan id 2000 local 192.0.2.17 \
+		dstport "$VXPORT" nolearning noudpcsum tos inherit ttl 100
+	ip link set dev vx200 up
+
+	ip link set dev vx200 master br2
+
+	ip link set dev $swp2 up
+	ip link add name $swp2.20 link $swp2 type vlan id 20
+	ip link set dev $swp2.20 master br2
+	ip link set dev $swp2.20 up
+
+	bridge fdb append dev vx100 00:00:00:00:00:00 dst 192.0.2.34 self
+	bridge fdb append dev vx200 00:00:00:00:00:00 dst 192.0.2.50 self
+}
+
+switch_destroy()
+{
+	bridge fdb del dev vx200 00:00:00:00:00:00 dst 192.0.2.50 self
+	bridge fdb del dev vx100 00:00:00:00:00:00 dst 192.0.2.34 self
+
+	ip link set dev vx200 nomaster
+	ip link set dev vx200 down
+	ip link del dev vx200
+
+	ip link del dev $swp2.20
+	ip link set dev $swp2 down
+	ip link set dev $swp2 nomaster
+
+	bridge vlan del vid 100 dev $swp1
+	ip link set dev $swp1 down
+	ip link set dev $swp1 nomaster
+
+	ip link set dev vx100 nomaster
+	ip link set dev vx100 down
+	ip link del dev vx100
+
+	rp1_unset_addr
+	ip link set dev $rp1 down
+
+	ip link set dev br2 down
+	ip link del dev br2
+
+	ip link set dev br1 down
+	ip link del dev br1
+}
+
+vrp2_create()
+{
+	simple_if_init $rp2 192.0.2.18/28
+	__simple_if_init v1 v$rp2 192.0.2.33/28
+	__simple_if_init v3 v$rp2 192.0.2.49/28
+	tc qdisc add dev v1 clsact
+}
+
+vrp2_destroy()
+{
+	tc qdisc del dev v1 clsact
+	__simple_if_fini v3 192.0.2.49/28
+	__simple_if_fini v1 192.0.2.33/28
+	simple_if_fini $rp2 192.0.2.18/28
+}
+
+ns_init_common()
+{
+	local in_if=$1; shift
+	local in_addr=$1; shift
+	local other_in_addr=$1; shift
+	local vxlan_name=$1; shift
+	local vxlan_id=$1; shift
+	local vlan_id=$1; shift
+	local host_addr=$1; shift
+	local nh_addr=$1; shift
+
+	ip link set dev $in_if up
+	ip address add dev $in_if $in_addr/28
+	tc qdisc add dev $in_if clsact
+
+	ip link add name br3 type bridge vlan_filtering 0
+	ip link set dev br3 up
+
+	ip link add name w1 type veth peer name w2
+
+	ip link set dev w1 master br3
+	ip link set dev w1 up
+
+	ip link add name $vxlan_name type vxlan id $vxlan_id local $in_addr \
+		dstport "$VXPORT"
+	ip link set dev $vxlan_name up
+	bridge fdb append dev $vxlan_name 00:00:00:00:00:00 dst 192.0.2.17 self
+	bridge fdb append dev $vxlan_name 00:00:00:00:00:00 dst $other_in_addr self
+
+	ip link set dev $vxlan_name master br3
+	tc qdisc add dev $vxlan_name clsact
+
+	simple_if_init w2
+	vlan_create w2 $vlan_id vw2 $host_addr/28
+
+	ip route add 192.0.2.16/28 nexthop via $nh_addr
+	ip route add $other_in_addr/32 nexthop via $nh_addr
+}
+export -f ns_init_common
+
+ns1_create()
+{
+	ip netns add ns1
+	ip link set dev v2 netns ns1
+	in_ns ns1 \
+	      ns_init_common v2 192.0.2.34 192.0.2.50 vx100 1000 10 192.0.2.3 \
+	      192.0.2.33
+
+	in_ns ns1 bridge vlan add vid 100 dev vx100 pvid untagged
+}
+
+ns1_destroy()
+{
+	ip netns exec ns1 ip link set dev v2 netns 1
+	ip netns del ns1
+}
+
+ns2_create()
+{
+	ip netns add ns2
+	ip link set dev v4 netns ns2
+	in_ns ns2 \
+	      ns_init_common v4 192.0.2.50 192.0.2.34 vx200 2000 20 192.0.2.4 \
+	      192.0.2.49
+
+	in_ns ns2 ip link add name w1.20 link w1 type vlan id 20
+	in_ns ns2 ip link set dev w1.20 master br3
+	in_ns ns2 ip link set dev w1.20 up
+}
+
+ns2_destroy()
+{
+	ip netns exec ns2 ip link set dev v4 netns 1
+	ip netns del ns2
+}
+
+setup_prepare()
+{
+	h1=${NETIFS[p1]}
+	swp1=${NETIFS[p2]}
+
+	swp2=${NETIFS[p3]}
+	h2=${NETIFS[p4]}
+
+	rp1=${NETIFS[p5]}
+	rp2=${NETIFS[p6]}
+
+	vrf_prepare
+	forwarding_enable
+
+	h1_create
+	h2_create
+	switch_create
+
+	ip link add name v1 type veth peer name v2
+	ip link add name v3 type veth peer name v4
+	vrp2_create
+	ns1_create
+	ns2_create
+
+	r1_mac=$(in_ns ns1 mac_get w2)
+	r2_mac=$(in_ns ns2 mac_get w2)
+	h2_mac=$(mac_get $h2)
+}
+
+cleanup()
+{
+	pre_cleanup
+
+	ns2_destroy
+	ns1_destroy
+	vrp2_destroy
+	ip link del dev v3
+	ip link del dev v1
+
+	switch_destroy
+	h2_destroy
+	h1_destroy
+
+	forwarding_restore
+	vrf_cleanup
+}
+
+ping_ipv4()
+{
+	ping_test $h1 192.0.2.3 ": local->remote 1 through VxLAN with an 802.1ad bridge"
+	ping_test $h2 192.0.2.4 ": local->remote 2 through VxLAN with an 802.1d bridge"
+}
+
+test_all()
+{
+	echo "Running tests with UDP port $VXPORT"
+	tests_run
+}
+
+trap cleanup EXIT
+
+setup_prepare
+setup_wait
+test_all
+
+exit $EXIT_STATUS