Commit 366695ff authored by Arnd Bergmann's avatar Arnd Bergmann

Merge branches 'depends/pinctrl/devel' and 'depends/rmk/clkdev' into spear/pinctrl

The spear/pinctrl branch has hard dependencies on both the
pinctrl branch and the clkdev branch. We merge those here
to fix it up without having to rebase a branch that has
been pulled into other stable branches already.

Conflicts:
	Documentation/driver-model/devres.txt
Signed-off-by: default avatarArnd Bergmann <arnd@arndb.de>
* Freescale IOMUX Controller (IOMUXC) for i.MX
The IOMUX Controller (IOMUXC), together with the IOMUX, enables the IC
to share one PAD to several functional blocks. The sharing is done by
multiplexing the PAD input/output signals. For each PAD there are up to
8 muxing options (called ALT modes). Since different modules require
different PAD settings (like pull up, keeper, etc) the IOMUXC controls
also the PAD settings parameters.
Please refer to pinctrl-bindings.txt in this directory for details of the
common pinctrl bindings used by client devices, including the meaning of the
phrase "pin configuration node".
Freescale IMX pin configuration node is a node of a group of pins which can be
used for a specific device or function. This node represents both mux and config
of the pins in that group. The 'mux' selects the function mode(also named mux
mode) this pin can work on and the 'config' configures various pad settings
such as pull-up, open drain, drive strength, etc.
Required properties for iomux controller:
- compatible: "fsl,<soc>-iomuxc"
Please refer to each fsl,<soc>-pinctrl.txt binding doc for supported SoCs.
Required properties for pin configuration node:
- fsl,pins: two integers array, represents a group of pins mux and config
setting. The format is fsl,pins = <PIN_FUNC_ID CONFIG>, PIN_FUNC_ID is a
pin working on a specific function, CONFIG is the pad setting value like
pull-up on this pin. Please refer to fsl,<soc>-pinctrl.txt for the valid
pins and functions of each SoC.
Bits used for CONFIG:
NO_PAD_CTL(1 << 31): indicate this pin does not need config.
SION(1 << 30): Software Input On Field.
Force the selected mux mode input path no matter of MUX_MODE functionality.
By default the input path is determined by functionality of the selected
mux mode (regular).
Other bits are used for PAD setting.
Please refer to each fsl,<soc>-pinctrl,txt binding doc for SoC specific part
of bits definitions.
NOTE:
Some requirements for using fsl,imx-pinctrl binding:
1. We have pin function node defined under iomux controller node to represent
what pinmux functions this SoC supports.
2. The pin configuration node intends to work on a specific function should
to be defined under that specific function node.
The function node's name should represent well about what function
this group of pins in this pin configuration node are working on.
3. The driver can use the function node's name and pin configuration node's
name describe the pin function and group hierarchy.
For example, Linux IMX pinctrl driver takes the function node's name
as the function name and pin configuration node's name as group name to
create the map table.
4. Each pin configuration node should have a phandle, devices can set pins
configurations by referring to the phandle of that pin configuration node.
Examples:
usdhc@0219c000 { /* uSDHC4 */
fsl,card-wired;
vmmc-supply = <&reg_3p3v>;
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usdhc4_1>;
};
iomuxc@020e0000 {
compatible = "fsl,imx6q-iomuxc";
reg = <0x020e0000 0x4000>;
/* shared pinctrl settings */
usdhc4 {
pinctrl_usdhc4_1: usdhc4grp-1 {
fsl,pins = <1386 0x17059 /* MX6Q_PAD_SD4_CMD__USDHC4_CMD */
1392 0x10059 /* MX6Q_PAD_SD4_CLK__USDHC4_CLK */
1462 0x17059 /* MX6Q_PAD_SD4_DAT0__USDHC4_DAT0 */
1470 0x17059 /* MX6Q_PAD_SD4_DAT1__USDHC4_DAT1 */
1478 0x17059 /* MX6Q_PAD_SD4_DAT2__USDHC4_DAT2 */
1486 0x17059 /* MX6Q_PAD_SD4_DAT3__USDHC4_DAT3 */
1493 0x17059 /* MX6Q_PAD_SD4_DAT4__USDHC4_DAT4 */
1501 0x17059 /* MX6Q_PAD_SD4_DAT5__USDHC4_DAT5 */
1509 0x17059 /* MX6Q_PAD_SD4_DAT6__USDHC4_DAT6 */
1517 0x17059>; /* MX6Q_PAD_SD4_DAT7__USDHC4_DAT7 */
};
};
....
};
Refer to the IOMUXC controller chapter in imx6q datasheet,
0x17059 means enable hysteresis, 47KOhm Pull Up, 50Mhz speed,
80Ohm driver strength and Fast Slew Rate.
User should refer to each SoC spec to set the correct value.
TODO: when dtc macro support is available, we can change above raw data
to dt macro which can get better readability in dts file.
This diff is collapsed.
NVIDIA Tegra20 pinmux controller
Required properties:
- compatible: "nvidia,tegra20-pinmux"
- reg: Should contain the register physical address and length for each of
the tri-state, mux, pull-up/down, and pad control register sets.
Please refer to pinctrl-bindings.txt in this directory for details of the
common pinctrl bindings used by client devices, including the meaning of the
phrase "pin configuration node".
Tegra's pin configuration nodes act as a container for an abitrary number of
subnodes. Each of these subnodes represents some desired configuration for a
pin, a group, or a list of pins or groups. This configuration can include the
mux function to select on those pin(s)/group(s), and various pin configuration
parameters, such as pull-up, tristate, drive strength, etc.
The name of each subnode is not important; all subnodes should be enumerated
and processed purely based on their content.
Each subnode only affects those parameters that are explicitly listed. In
other words, a subnode that lists a mux function but no pin configuration
parameters implies no information about any pin configuration parameters.
Similarly, a pin subnode that describes a pullup parameter implies no
information about e.g. the mux function or tristate parameter. For this
reason, even seemingly boolean values are actually tristates in this binding:
unspecified, off, or on. Unspecified is represented as an absent property,
and off/on are represented as integer values 0 and 1.
Required subnode-properties:
- nvidia,pins : An array of strings. Each string contains the name of a pin or
group. Valid values for these names are listed below.
Optional subnode-properties:
- nvidia,function: A string containing the name of the function to mux to the
pin or group. Valid values for function names are listed below. See the Tegra
TRM to determine which are valid for each pin or group.
- nvidia,pull: Integer, representing the pull-down/up to apply to the pin.
0: none, 1: down, 2: up.
- nvidia,tristate: Integer.
0: drive, 1: tristate.
- nvidia,high-speed-mode: Integer. Enable high speed mode the pins.
0: no, 1: yes.
- nvidia,schmitt: Integer. Enables Schmitt Trigger on the input.
0: no, 1: yes.
- nvidia,low-power-mode: Integer. Valid values 0-3. 0 is least power, 3 is
most power. Controls the drive power or current. See "Low Power Mode"
or "LPMD1" and "LPMD0" in the Tegra TRM.
- nvidia,pull-down-strength: Integer. Controls drive strength. 0 is weakest.
The range of valid values depends on the pingroup. See "CAL_DRVDN" in the
Tegra TRM.
- nvidia,pull-up-strength: Integer. Controls drive strength. 0 is weakest.
The range of valid values depends on the pingroup. See "CAL_DRVUP" in the
Tegra TRM.
- nvidia,slew-rate-rising: Integer. Controls rising signal slew rate. 0 is
fastest. The range of valid values depends on the pingroup. See
"DRVDN_SLWR" in the Tegra TRM.
- nvidia,slew-rate-falling: Integer. Controls falling signal slew rate. 0 is
fastest. The range of valid values depends on the pingroup. See
"DRVUP_SLWF" in the Tegra TRM.
Note that many of these properties are only valid for certain specific pins
or groups. See the Tegra TRM and various pinmux spreadsheets for complete
details regarding which groups support which functionality. The Linux pinctrl
driver may also be a useful reference, since it consolidates, disambiguates,
and corrects data from all those sources.
Valid values for pin and group names are:
mux groups:
These all support nvidia,function, nvidia,tristate, and many support
nvidia,pull.
ata, atb, atc, atd, ate, cdev1, cdev2, crtp, csus, dap1, dap2, dap3, dap4,
ddc, dta, dtb, dtc, dtd, dte, dtf, gma, gmb, gmc, gmd, gme, gpu, gpu7,
gpv, hdint, i2cp, irrx, irtx, kbca, kbcb, kbcc, kbcd, kbce, kbcf, lcsn,
ld0, ld1, ld2, ld3, ld4, ld5, ld6, ld7, ld8, ld9, ld10, ld11, ld12, ld13,
ld14, ld15, ld16, ld17, ldc, ldi, lhp0, lhp1, lhp2, lhs, lm0, lm1, lpp,
lpw0, lpw1, lpw2, lsc0, lsc1, lsck, lsda, lsdi, lspi, lvp0, lvp1, lvs,
owc, pmc, pta, rm, sdb, sdc, sdd, sdio1, slxa, slxc, slxd, slxk, spdi,
spdo, spia, spib, spic, spid, spie, spif, spig, spih, uaa, uab, uac, uad,
uca, ucb, uda.
tristate groups:
These only support nvidia,pull.
ck32, ddrc, pmca, pmcb, pmcc, pmcd, pmce, xm2c, xm2d, ls, lc, ld17_0,
ld19_18, ld21_20, ld23_22.
drive groups:
With some exceptions, these support nvidia,high-speed-mode,
nvidia,schmitt, nvidia,low-power-mode, nvidia,pull-down-strength,
nvidia,pull-up-strength, nvidia,slew_rate-rising, nvidia,slew_rate-falling.
drive_ao1, drive_ao2, drive_at1, drive_at2, drive_cdev1, drive_cdev2,
drive_csus, drive_dap1, drive_dap2, drive_dap3, drive_dap4, drive_dbg,
drive_lcd1, drive_lcd2, drive_sdmmc2, drive_sdmmc3, drive_spi, drive_uaa,
drive_uab, drive_uart2, drive_uart3, drive_vi1, drive_vi2, drive_xm2a,
drive_xm2c, drive_xm2d, drive_xm2clk, drive_sdio1, drive_crt, drive_ddc,
drive_gma, drive_gmb, drive_gmc, drive_gmd, drive_gme, drive_owr,
drive_uda.
Example:
pinctrl@70000000 {
compatible = "nvidia,tegra20-pinmux";
reg = < 0x70000014 0x10 /* Tri-state registers */
0x70000080 0x20 /* Mux registers */
0x700000a0 0x14 /* Pull-up/down registers */
0x70000868 0xa8 >; /* Pad control registers */
};
Example board file extract:
pinctrl@70000000 {
sdio4_default: sdio4_default {
atb {
nvidia,pins = "atb", "gma", "gme";
nvidia,function = "sdio4";
nvidia,pull = <0>;
nvidia,tristate = <0>;
};
};
};
sdhci@c8000600 {
pinctrl-names = "default";
pinctrl-0 = <&sdio4_default>;
};
NVIDIA Tegra30 pinmux controller
The Tegra30 pinctrl binding is very similar to the Tegra20 pinctrl binding,
as described in nvidia,tegra20-pinmux.txt. In fact, this document assumes
that binding as a baseline, and only documents the differences between the
two bindings.
Required properties:
- compatible: "nvidia,tegra30-pinmux"
- reg: Should contain the register physical address and length for each of
the pad control and mux registers.
Tegra30 adds the following optional properties for pin configuration subnodes:
- nvidia,enable-input: Integer. Enable the pin's input path. 0: no, 1: yes.
- nvidia,open-drain: Integer. Enable open drain mode. 0: no, 1: yes.
- nvidia,lock: Integer. Lock the pin configuration against further changes
until reset. 0: no, 1: yes.
- nvidia,io-reset: Integer. Reset the IO path. 0: no, 1: yes.
As with Tegra20, see the Tegra TRM for complete details regarding which groups
support which functionality.
Valid values for pin and group names are:
per-pin mux groups:
These all support nvidia,function, nvidia,tristate, nvidia,pull,
nvidia,enable-input, nvidia,lock. Some support nvidia,open-drain,
nvidia,io-reset.
clk_32k_out_pa0, uart3_cts_n_pa1, dap2_fs_pa2, dap2_sclk_pa3,
dap2_din_pa4, dap2_dout_pa5, sdmmc3_clk_pa6, sdmmc3_cmd_pa7, gmi_a17_pb0,
gmi_a18_pb1, lcd_pwr0_pb2, lcd_pclk_pb3, sdmmc3_dat3_pb4, sdmmc3_dat2_pb5,
sdmmc3_dat1_pb6, sdmmc3_dat0_pb7, uart3_rts_n_pc0, lcd_pwr1_pc1,
uart2_txd_pc2, uart2_rxd_pc3, gen1_i2c_scl_pc4, gen1_i2c_sda_pc5,
lcd_pwr2_pc6, gmi_wp_n_pc7, sdmmc3_dat5_pd0, sdmmc3_dat4_pd1, lcd_dc1_pd2,
sdmmc3_dat6_pd3, sdmmc3_dat7_pd4, vi_d1_pd5, vi_vsync_pd6, vi_hsync_pd7,
lcd_d0_pe0, lcd_d1_pe1, lcd_d2_pe2, lcd_d3_pe3, lcd_d4_pe4, lcd_d5_pe5,
lcd_d6_pe6, lcd_d7_pe7, lcd_d8_pf0, lcd_d9_pf1, lcd_d10_pf2, lcd_d11_pf3,
lcd_d12_pf4, lcd_d13_pf5, lcd_d14_pf6, lcd_d15_pf7, gmi_ad0_pg0,
gmi_ad1_pg1, gmi_ad2_pg2, gmi_ad3_pg3, gmi_ad4_pg4, gmi_ad5_pg5,
gmi_ad6_pg6, gmi_ad7_pg7, gmi_ad8_ph0, gmi_ad9_ph1, gmi_ad10_ph2,
gmi_ad11_ph3, gmi_ad12_ph4, gmi_ad13_ph5, gmi_ad14_ph6, gmi_ad15_ph7,
gmi_wr_n_pi0, gmi_oe_n_pi1, gmi_dqs_pi2, gmi_cs6_n_pi3, gmi_rst_n_pi4,
gmi_iordy_pi5, gmi_cs7_n_pi6, gmi_wait_pi7, gmi_cs0_n_pj0, lcd_de_pj1,
gmi_cs1_n_pj2, lcd_hsync_pj3, lcd_vsync_pj4, uart2_cts_n_pj5,
uart2_rts_n_pj6, gmi_a16_pj7, gmi_adv_n_pk0, gmi_clk_pk1, gmi_cs4_n_pk2,
gmi_cs2_n_pk3, gmi_cs3_n_pk4, spdif_out_pk5, spdif_in_pk6, gmi_a19_pk7,
vi_d2_pl0, vi_d3_pl1, vi_d4_pl2, vi_d5_pl3, vi_d6_pl4, vi_d7_pl5,
vi_d8_pl6, vi_d9_pl7, lcd_d16_pm0, lcd_d17_pm1, lcd_d18_pm2, lcd_d19_pm3,
lcd_d20_pm4, lcd_d21_pm5, lcd_d22_pm6, lcd_d23_pm7, dap1_fs_pn0,
dap1_din_pn1, dap1_dout_pn2, dap1_sclk_pn3, lcd_cs0_n_pn4, lcd_sdout_pn5,
lcd_dc0_pn6, hdmi_int_pn7, ulpi_data7_po0, ulpi_data0_po1, ulpi_data1_po2,
ulpi_data2_po3, ulpi_data3_po4, ulpi_data4_po5, ulpi_data5_po6,
ulpi_data6_po7, dap3_fs_pp0, dap3_din_pp1, dap3_dout_pp2, dap3_sclk_pp3,
dap4_fs_pp4, dap4_din_pp5, dap4_dout_pp6, dap4_sclk_pp7, kb_col0_pq0,
kb_col1_pq1, kb_col2_pq2, kb_col3_pq3, kb_col4_pq4, kb_col5_pq5,
kb_col6_pq6, kb_col7_pq7, kb_row0_pr0, kb_row1_pr1, kb_row2_pr2,
kb_row3_pr3, kb_row4_pr4, kb_row5_pr5, kb_row6_pr6, kb_row7_pr7,
kb_row8_ps0, kb_row9_ps1, kb_row10_ps2, kb_row11_ps3, kb_row12_ps4,
kb_row13_ps5, kb_row14_ps6, kb_row15_ps7, vi_pclk_pt0, vi_mclk_pt1,
vi_d10_pt2, vi_d11_pt3, vi_d0_pt4, gen2_i2c_scl_pt5, gen2_i2c_sda_pt6,
sdmmc4_cmd_pt7, pu0, pu1, pu2, pu3, pu4, pu5, pu6, jtag_rtck_pu7, pv0,
pv1, pv2, pv3, ddc_scl_pv4, ddc_sda_pv5, crt_hsync_pv6, crt_vsync_pv7,
lcd_cs1_n_pw0, lcd_m1_pw1, spi2_cs1_n_pw2, spi2_cs2_n_pw3, clk1_out_pw4,
clk2_out_pw5, uart3_txd_pw6, uart3_rxd_pw7, spi2_mosi_px0, spi2_miso_px1,
spi2_sck_px2, spi2_cs0_n_px3, spi1_mosi_px4, spi1_sck_px5, spi1_cs0_n_px6,
spi1_miso_px7, ulpi_clk_py0, ulpi_dir_py1, ulpi_nxt_py2, ulpi_stp_py3,
sdmmc1_dat3_py4, sdmmc1_dat2_py5, sdmmc1_dat1_py6, sdmmc1_dat0_py7,
sdmmc1_clk_pz0, sdmmc1_cmd_pz1, lcd_sdin_pz2, lcd_wr_n_pz3, lcd_sck_pz4,
sys_clk_req_pz5, pwr_i2c_scl_pz6, pwr_i2c_sda_pz7, sdmmc4_dat0_paa0,
sdmmc4_dat1_paa1, sdmmc4_dat2_paa2, sdmmc4_dat3_paa3, sdmmc4_dat4_paa4,
sdmmc4_dat5_paa5, sdmmc4_dat6_paa6, sdmmc4_dat7_paa7, pbb0,
cam_i2c_scl_pbb1, cam_i2c_sda_pbb2, pbb3, pbb4, pbb5, pbb6, pbb7,
cam_mclk_pcc0, pcc1, pcc2, sdmmc4_rst_n_pcc3, sdmmc4_clk_pcc4,
clk2_req_pcc5, pex_l2_rst_n_pcc6, pex_l2_clkreq_n_pcc7,
pex_l0_prsnt_n_pdd0, pex_l0_rst_n_pdd1, pex_l0_clkreq_n_pdd2,
pex_wake_n_pdd3, pex_l1_prsnt_n_pdd4, pex_l1_rst_n_pdd5,
pex_l1_clkreq_n_pdd6, pex_l2_prsnt_n_pdd7, clk3_out_pee0, clk3_req_pee1,
clk1_req_pee2, hdmi_cec_pee3, clk_32k_in, core_pwr_req, cpu_pwr_req, owr,
pwr_int_n.
drive groups:
These all support nvidia,pull-down-strength, nvidia,pull-up-strength,
nvidia,slew_rate-rising, nvidia,slew_rate-falling. Most but not all
support nvidia,high-speed-mode, nvidia,schmitt, nvidia,low-power-mode.
ao1, ao2, at1, at2, at3, at4, at5, cdev1, cdev2, cec, crt, csus, dap1,
dap2, dap3, dap4, dbg, ddc, dev3, gma, gmb, gmc, gmd, gme, gmf, gmg,
gmh, gpv, lcd1, lcd2, owr, sdio1, sdio2, sdio3, spi, uaa, uab, uart2,
uart3, uda, vi1.
Example:
pinctrl@70000000 {
compatible = "nvidia,tegra30-pinmux";
reg = < 0x70000868 0xd0 /* Pad control registers */
0x70003000 0x3e0 >; /* Mux registers */
};
Example board file extract:
pinctrl@70000000 {
sdmmc4_default: pinmux {
sdmmc4_clk_pcc4 {
nvidia,pins = "sdmmc4_clk_pcc4",
"sdmmc4_rst_n_pcc3";
nvidia,function = "sdmmc4";
nvidia,pull = <0>;
nvidia,tristate = <0>;
};
sdmmc4_dat0_paa0 {
nvidia,pins = "sdmmc4_dat0_paa0",
"sdmmc4_dat1_paa1",
"sdmmc4_dat2_paa2",
"sdmmc4_dat3_paa3",
"sdmmc4_dat4_paa4",
"sdmmc4_dat5_paa5",
"sdmmc4_dat6_paa6",
"sdmmc4_dat7_paa7";
nvidia,function = "sdmmc4";
nvidia,pull = <2>;
nvidia,tristate = <0>;
};
};
};
sdhci@78000400 {
pinctrl-names = "default";
pinctrl-0 = <&sdmmc4_default>;
};
== Introduction ==
Hardware modules that control pin multiplexing or configuration parameters
such as pull-up/down, tri-state, drive-strength etc are designated as pin
controllers. Each pin controller must be represented as a node in device tree,
just like any other hardware module.
Hardware modules whose signals are affected by pin configuration are
designated client devices. Again, each client device must be represented as a
node in device tree, just like any other hardware module.
For a client device to operate correctly, certain pin controllers must
set up certain specific pin configurations. Some client devices need a
single static pin configuration, e.g. set up during initialization. Others
need to reconfigure pins at run-time, for example to tri-state pins when the
device is inactive. Hence, each client device can define a set of named
states. The number and names of those states is defined by the client device's
own binding.
The common pinctrl bindings defined in this file provide an infrastructure
for client device device tree nodes to map those state names to the pin
configuration used by those states.
Note that pin controllers themselves may also be client devices of themselves.
For example, a pin controller may set up its own "active" state when the
driver loads. This would allow representing a board's static pin configuration
in a single place, rather than splitting it across multiple client device
nodes. The decision to do this or not somewhat rests with the author of
individual board device tree files, and any requirements imposed by the
bindings for the individual client devices in use by that board, i.e. whether
they require certain specific named states for dynamic pin configuration.
== Pinctrl client devices ==
For each client device individually, every pin state is assigned an integer
ID. These numbers start at 0, and are contiguous. For each state ID, a unique
property exists to define the pin configuration. Each state may also be
assigned a name. When names are used, another property exists to map from
those names to the integer IDs.
Each client device's own binding determines the set of states the must be
defined in its device tree node, and whether to define the set of state
IDs that must be provided, or whether to define the set of state names that
must be provided.
Required properties:
pinctrl-0: List of phandles, each pointing at a pin configuration
node. These referenced pin configuration nodes must be child
nodes of the pin controller that they configure. Multiple
entries may exist in this list so that multiple pin
controllers may be configured, or so that a state may be built
from multiple nodes for a single pin controller, each
contributing part of the overall configuration. See the next
section of this document for details of the format of these
pin configuration nodes.
In some cases, it may be useful to define a state, but for it
to be empty. This may be required when a common IP block is
used in an SoC either without a pin controller, or where the
pin controller does not affect the HW module in question. If
the binding for that IP block requires certain pin states to
exist, they must still be defined, but may be left empty.
Optional properties:
pinctrl-1: List of phandles, each pointing at a pin configuration
node within a pin controller.
...
pinctrl-n: List of phandles, each pointing at a pin configuration
node within a pin controller.
pinctrl-names: The list of names to assign states. List entry 0 defines the
name for integer state ID 0, list entry 1 for state ID 1, and
so on.
For example:
/* For a client device requiring named states */
device {
pinctrl-names = "active", "idle";
pinctrl-0 = <&state_0_node_a>;
pinctrl-1 = <&state_1_node_a &state_1_node_b>;
};
/* For the same device if using state IDs */
device {
pinctrl-0 = <&state_0_node_a>;
pinctrl-1 = <&state_1_node_a &state_1_node_b>;
};
/*
* For an IP block whose binding supports pin configuration,
* but in use on an SoC that doesn't have any pin control hardware
*/
device {
pinctrl-names = "active", "idle";
pinctrl-0 = <>;
pinctrl-1 = <>;
};
== Pin controller devices ==
Pin controller devices should contain the pin configuration nodes that client
devices reference.
For example:
pincontroller {
... /* Standard DT properties for the device itself elided */
state_0_node_a {
...
};
state_1_node_a {
...
};
state_1_node_b {
...
};
}
The contents of each of those pin configuration child nodes is defined
entirely by the binding for the individual pin controller device. There
exists no common standard for this content.
The pin configuration nodes need not be direct children of the pin controller
device; they may be grandchildren, for example. Whether this is legal, and
whether there is any interaction between the child and intermediate parent
nodes, is again defined entirely by the binding for the individual pin
controller device.
NVIDIA Tegra 2 pinmux controller
Required properties:
- compatible : "nvidia,tegra20-pinmux"
......@@ -276,3 +276,11 @@ REGULATOR
devm_regulator_get()
devm_regulator_put()
devm_regulator_bulk_get()
CLOCK
devm_clk_get()
devm_clk_put()
PINCTRL
devm_pinctrl_get()
devm_pinctrl_put()
......@@ -152,11 +152,9 @@ static const struct foo_group foo_groups[] = {
};
static int foo_list_groups(struct pinctrl_dev *pctldev, unsigned selector)
static int foo_get_groups_count(struct pinctrl_dev *pctldev)
{
if (selector >= ARRAY_SIZE(foo_groups))
return -EINVAL;
return 0;
return ARRAY_SIZE(foo_groups);
}
static const char *foo_get_group_name(struct pinctrl_dev *pctldev,
......@@ -175,7 +173,7 @@ static int foo_get_group_pins(struct pinctrl_dev *pctldev, unsigned selector,
}
static struct pinctrl_ops foo_pctrl_ops = {
.list_groups = foo_list_groups,
.get_groups_count = foo_get_groups_count,
.get_group_name = foo_get_group_name,
.get_group_pins = foo_get_group_pins,
};
......@@ -186,13 +184,12 @@ static struct pinctrl_desc foo_desc = {
.pctlops = &foo_pctrl_ops,
};
The pin control subsystem will call the .list_groups() function repeatedly
beginning on 0 until it returns non-zero to determine legal selectors, then
it will call the other functions to retrieve the name and pins of the group.
Maintaining the data structure of the groups is up to the driver, this is
just a simple example - in practice you may need more entries in your group
structure, for example specific register ranges associated with each group
and so on.
The pin control subsystem will call the .get_groups_count() function to
determine total number of legal selectors, then it will call the other functions
to retrieve the name and pins of the group. Maintaining the data structure of
the groups is up to the driver, this is just a simple example - in practice you
may need more entries in your group structure, for example specific register
ranges associated with each group and so on.
Pin configuration
......@@ -606,11 +603,9 @@ static const struct foo_group foo_groups[] = {
};
static int foo_list_groups(struct pinctrl_dev *pctldev, unsigned selector)
static int foo_get_groups_count(struct pinctrl_dev *pctldev)
{
if (selector >= ARRAY_SIZE(foo_groups))
return -EINVAL;
return 0;
return ARRAY_SIZE(foo_groups);
}
static const char *foo_get_group_name(struct pinctrl_dev *pctldev,
......@@ -629,7 +624,7 @@ static int foo_get_group_pins(struct pinctrl_dev *pctldev, unsigned selector,
}
static struct pinctrl_ops foo_pctrl_ops = {
.list_groups = foo_list_groups,
.get_groups_count = foo_get_groups_count,
.get_group_name = foo_get_group_name,
.get_group_pins = foo_get_group_pins,
};
......@@ -640,7 +635,7 @@ struct foo_pmx_func {
const unsigned num_groups;
};
static const char * const spi0_groups[] = { "spi0_1_grp" };
static const char * const spi0_groups[] = { "spi0_0_grp", "spi0_1_grp" };
static const char * const i2c0_groups[] = { "i2c0_grp" };
static const char * const mmc0_groups[] = { "mmc0_1_grp", "mmc0_2_grp",
"mmc0_3_grp" };
......@@ -663,11 +658,9 @@ static const struct foo_pmx_func foo_functions[] = {
},
};
int foo_list_funcs(struct pinctrl_dev *pctldev, unsigned selector)
int foo_get_functions_count(struct pinctrl_dev *pctldev)
{
if (selector >= ARRAY_SIZE(foo_functions))
return -EINVAL;
return 0;
return ARRAY_SIZE(foo_functions);
}
const char *foo_get_fname(struct pinctrl_dev *pctldev, unsigned selector)
......@@ -703,7 +696,7 @@ void foo_disable(struct pinctrl_dev *pctldev, unsigned selector,
}
struct pinmux_ops foo_pmxops = {
.list_functions = foo_list_funcs,
.get_functions_count = foo_get_functions_count,
.get_function_name = foo_get_fname,
.get_function_groups = foo_get_groups,
.enable = foo_enable,
......@@ -786,7 +779,7 @@ and spi on the second function mapping:
#include <linux/pinctrl/machine.h>
static const struct pinctrl_map __initdata mapping[] = {
static const struct pinctrl_map mapping[] __initconst = {
{
.dev_name = "foo-spi.0",
.name = PINCTRL_STATE_DEFAULT,
......@@ -952,13 +945,13 @@ case), we define a mapping like this:
The result of grabbing this mapping from the device with something like
this (see next paragraph):
p = pinctrl_get(dev);
p = devm_pinctrl_get(dev);
s = pinctrl_lookup_state(p, "8bit");
ret = pinctrl_select_state(p, s);
or more simply:
p = pinctrl_get_select(dev, "8bit");
p = devm_pinctrl_get_select(dev, "8bit");
Will be that you activate all the three bottom records in the mapping at
once. Since they share the same name, pin controller device, function and
......@@ -992,7 +985,7 @@ foo_probe()
/* Allocate a state holder named "foo" etc */
struct foo_state *foo = ...;
foo->p = pinctrl_get(&device);
foo->p = devm_pinctrl_get(&device);
if (IS_ERR(foo->p)) {
/* FIXME: clean up "foo" here */
return PTR_ERR(foo->p);
......@@ -1000,24 +993,17 @@ foo_probe()
foo->s = pinctrl_lookup_state(foo->p, PINCTRL_STATE_DEFAULT);
if (IS_ERR(foo->s)) {
pinctrl_put(foo->p);
/* FIXME: clean up "foo" here */
return PTR_ERR(s);
}
ret = pinctrl_select_state(foo->s);
if (ret < 0) {
pinctrl_put(foo->p);
/* FIXME: clean up "foo" here */
return ret;
}
}
foo_remove()
{
pinctrl_put(state->p);
}
This get/lookup/select/put sequence can just as well be handled by bus drivers
if you don't want each and every driver to handle it and you know the
arrangement on your bus.
......@@ -1029,6 +1015,11 @@ The semantics of the pinctrl APIs are:
kernel memory to hold the pinmux state. All mapping table parsing or similar
slow operations take place within this API.
- devm_pinctrl_get() is a variant of pinctrl_get() that causes pinctrl_put()
to be called automatically on the retrieved pointer when the associated
device is removed. It is recommended to use this function over plain
pinctrl_get().
- pinctrl_lookup_state() is called in process context to obtain a handle to a
specific state for a the client device. This operation may be slow too.
......@@ -1041,14 +1032,30 @@ The semantics of the pinctrl APIs are:
- pinctrl_put() frees all information associated with a pinctrl handle.
- devm_pinctrl_put() is a variant of pinctrl_put() that may be used to
explicitly destroy a pinctrl object returned by devm_pinctrl_get().
However, use of this function will be rare, due to the automatic cleanup
that will occur even without calling it.
pinctrl_get() must be paired with a plain pinctrl_put().
pinctrl_get() may not be paired with devm_pinctrl_put().
devm_pinctrl_get() can optionally be paired with devm_pinctrl_put().
devm_pinctrl_get() may not be paired with plain pinctrl_put().
Usually the pin control core handled the get/put pair and call out to the
device drivers bookkeeping operations, like checking available functions and
the associated pins, whereas the enable/disable pass on to the pin controller
driver which takes care of activating and/or deactivating the mux setting by
quickly poking some registers.
The pins are allocated for your device when you issue the pinctrl_get() call,
after this you should be able to see this in the debugfs listing of all pins.
The pins are allocated for your device when you issue the devm_pinctrl_get()
call, after this you should be able to see this in the debugfs listing of all
pins.
NOTE: the pinctrl system will return -EPROBE_DEFER if it cannot find the
requested pinctrl handles, for example if the pinctrl driver has not yet
registered. Thus make sure that the error path in your driver gracefully
cleans up and is ready to retry the probing later in the startup process.
System pin control hogging
......@@ -1094,13 +1101,13 @@ it, disables and releases it, and muxes it in on the pins defined by group B:
#include <linux/pinctrl/consumer.h>
foo_switch()
{
struct pinctrl *p;
struct pinctrl_state *s1, *s2;
struct pinctrl *p;
struct pinctrl_state *s1, *s2;
foo_probe()
{
/* Setup */
p = pinctrl_get(&device);
p = devm_pinctrl_get(&device);
if (IS_ERR(p))
...
......@@ -1111,7 +1118,10 @@ foo_switch()
s2 = pinctrl_lookup_state(foo->p, "pos-B");
if (IS_ERR(s2))
...
}
foo_switch()
{
/* Enable on position A */
ret = pinctrl_select_state(s1);
if (ret < 0)
......@@ -1125,8 +1135,6 @@ foo_switch()
...
...
pinctrl_put(p);
}
The above has to be done from process context.
......@@ -35,7 +35,12 @@ static DEFINE_MUTEX(clocks_mutex);
static struct clk_lookup *clk_find(const char *dev_id, const char *con_id)
{
struct clk_lookup *p, *cl = NULL;
int match, best = 0;
int match, best_found = 0, best_possible = 0;
if (dev_id)
best_possible += 2;
if (con_id)
best_possible += 1;
list_for_each_entry(p, &clocks, node) {
match = 0;
......@@ -50,10 +55,10 @@ static struct clk_lookup *clk_find(const char *dev_id, const char *con_id)
match += 1;
}
if (match > best) {
if (match > best_found) {
cl = p;
if (match != 3)
best = match;
if (match != best_possible)
best_found = match;
else
break;
}
......@@ -89,6 +94,51 @@ void clk_put(struct clk *clk)
}
EXPORT_SYMBOL(clk_put);
static void devm_clk_release(struct device *dev, void *res)
{
clk_put(*(struct clk **)res);
}
struct clk *devm_clk_get(struct device *dev, const char *id)
{
struct clk **ptr, *clk;
ptr = devres_alloc(devm_clk_release, sizeof(*ptr), GFP_KERNEL);
if (!ptr)
return ERR_PTR(-ENOMEM);
clk = clk_get(dev, id);
if (!IS_ERR(clk)) {
*ptr = clk;
devres_add(dev, ptr);
} else {
devres_free(ptr);
}
return clk;
}
EXPORT_SYMBOL(devm_clk_get);
static int devm_clk_match(struct device *dev, void *res, void *data)
{
struct clk **c = res;
if (!c || !*c) {
WARN_ON(!c || !*c);
return 0;
}
return *c == data;
}
void devm_clk_put(struct device *dev, struct clk *clk)
{
int ret;
ret = devres_destroy(dev, devm_clk_release, devm_clk_match, clk);
WARN_ON(ret);
}
EXPORT_SYMBOL(devm_clk_put);
void clkdev_add(struct clk_lookup *cl)
{
mutex_lock(&clocks_mutex);
......@@ -116,8 +166,9 @@ struct clk_lookup_alloc {
char con_id[MAX_CON_ID];
};
struct clk_lookup * __init_refok
clkdev_alloc(struct clk *clk, const char *con_id, const char *dev_fmt, ...)
static struct clk_lookup * __init_refok
vclkdev_alloc(struct clk *clk, const char *con_id, const char *dev_fmt,
va_list ap)
{
struct clk_lookup_alloc *cla;
......@@ -132,16 +183,25 @@ clkdev_alloc(struct clk *clk, const char *con_id, const char *dev_fmt, ...)
}
if (dev_fmt) {
va_list ap;
va_start(ap, dev_fmt);
vscnprintf(cla->dev_id, sizeof(cla->dev_id), dev_fmt, ap);
cla->cl.dev_id = cla->dev_id;
va_end(ap);
}
return &cla->cl;
}
struct clk_lookup * __init_refok
clkdev_alloc(struct clk *clk, const char *con_id, const char *dev_fmt, ...)
{
struct clk_lookup *cl;
va_list ap;
va_start(ap, dev_fmt);
cl = vclkdev_alloc(clk, con_id, dev_fmt, ap);
va_end(ap);
return cl;
}
EXPORT_SYMBOL(clkdev_alloc);
int clk_add_alias(const char *alias, const char *alias_dev_name, char *id,
......@@ -173,3 +233,65 @@ void clkdev_drop(struct clk_lookup *cl)
kfree(cl);
}
EXPORT_SYMBOL(clkdev_drop);
/**
* clk_register_clkdev - register one clock lookup for a struct clk
* @clk: struct clk to associate with all clk_lookups
* @con_id: connection ID string on device
* @dev_id: format string describing device name
*
* con_id or dev_id may be NULL as a wildcard, just as in the rest of
* clkdev.
*
* To make things easier for mass registration, we detect error clks
* from a previous clk_register() call, and return the error code for
* those. This is to permit this function to be called immediately
* after clk_register().
*/
int clk_register_clkdev(struct clk *clk, const char *con_id,
const char *dev_fmt, ...)
{
struct clk_lookup *cl;
va_list ap;
if (IS_ERR(clk))
return PTR_ERR(clk);
va_start(ap, dev_fmt);
cl = vclkdev_alloc(clk, con_id, dev_fmt, ap);
va_end(ap);
if (!cl)
return -ENOMEM;
clkdev_add(cl);
return 0;
}
/**
* clk_register_clkdevs - register a set of clk_lookup for a struct clk
* @clk: struct clk to associate with all clk_lookups
* @cl: array of clk_lookup structures with con_id and dev_id pre-initialized
* @num: number of clk_lookup structures to register
*
* To make things easier for mass registration, we detect error clks
* from a previous clk_register() call, and return the error code for
* those. This is to permit this function to be called immediately
* after clk_register().
*/
int clk_register_clkdevs(struct clk *clk, struct clk_lookup *cl, size_t num)
{
unsigned i;
if (IS_ERR(clk))
return PTR_ERR(clk);
for (i = 0; i < num; i++, cl++) {
cl->clk = clk;
clkdev_add(cl);
}
return 0;
}
EXPORT_SYMBOL(clk_register_clkdevs);
......@@ -1260,3 +1260,44 @@ int of_alias_get_id(struct device_node *np, const char *stem)
return id;
}
EXPORT_SYMBOL_GPL(of_alias_get_id);
const __be32 *of_prop_next_u32(struct property *prop, const __be32 *cur,
u32 *pu)
{
const void *curv = cur;
if (!prop)
return NULL;
if (!cur) {
curv = prop->value;
goto out_val;
}
curv += sizeof(*cur);
if (curv >= prop->value + prop->length)
return NULL;
out_val:
*pu = be32_to_cpup(curv);
return curv;
}
EXPORT_SYMBOL_GPL(of_prop_next_u32);
const char *of_prop_next_string(struct property *prop, const char *cur)
{
const void *curv = cur;
if (!prop)
return NULL;
if (!cur)
return prop->value;
curv += strlen(cur) + 1;
if (curv >= prop->value + prop->length)
return NULL;
return curv;
}
EXPORT_SYMBOL_GPL(of_prop_next_string);
......@@ -4,7 +4,6 @@
config PINCTRL
bool
depends on EXPERIMENTAL
if PINCTRL
......@@ -27,6 +26,19 @@ config DEBUG_PINCTRL
help
Say Y here to add some extra checks and diagnostics to PINCTRL calls.
config PINCTRL_IMX
bool
select PINMUX
select PINCONF
config PINCTRL_IMX6Q
bool "IMX6Q pinctrl driver"
depends on OF
depends on SOC_IMX6Q
select PINCTRL_IMX
help
Say Y here to enable the imx6q pinctrl driver
config PINCTRL_PXA3xx
bool
select PINMUX
......@@ -37,6 +49,21 @@ config PINCTRL_MMP2
select PINCTRL_PXA3xx
select PINCONF
config PINCTRL_MXS
bool
config PINCTRL_IMX23
bool
select PINMUX
select PINCONF
select PINCTRL_MXS
config PINCTRL_IMX28
bool
select PINMUX
select PINCONF
select PINCTRL_MXS
config PINCTRL_PXA168
bool "PXA168 pin controller driver"
depends on ARCH_MMP
......
......@@ -5,9 +5,17 @@ ccflags-$(CONFIG_DEBUG_PINCTRL) += -DDEBUG
obj-$(CONFIG_PINCTRL) += core.o
obj-$(CONFIG_PINMUX) += pinmux.o
obj-$(CONFIG_PINCONF) += pinconf.o
ifeq ($(CONFIG_OF),y)
obj-$(CONFIG_PINCTRL) += devicetree.o
endif
obj-$(CONFIG_GENERIC_PINCONF) += pinconf-generic.o
obj-$(CONFIG_PINCTRL_IMX) += pinctrl-imx.o
obj-$(CONFIG_PINCTRL_IMX6Q) += pinctrl-imx6q.o
obj-$(CONFIG_PINCTRL_PXA3xx) += pinctrl-pxa3xx.o
obj-$(CONFIG_PINCTRL_MMP2) += pinctrl-mmp2.o
obj-$(CONFIG_PINCTRL_MXS) += pinctrl-mxs.o
obj-$(CONFIG_PINCTRL_IMX23) += pinctrl-imx23.o
obj-$(CONFIG_PINCTRL_IMX28) += pinctrl-imx28.o
obj-$(CONFIG_PINCTRL_PXA168) += pinctrl-pxa168.o
obj-$(CONFIG_PINCTRL_PXA910) += pinctrl-pxa910.o
obj-$(CONFIG_PINCTRL_SIRF) += pinctrl-sirf.o
......
This diff is collapsed.
......@@ -52,12 +52,15 @@ struct pinctrl_dev {
* @dev: the device using this pin control handle
* @states: a list of states for this device
* @state: the current state
* @dt_maps: the mapping table chunks dynamically parsed from device tree for
* this device, if any
*/
struct pinctrl {
struct list_head node;
struct device *dev;
struct list_head states;
struct pinctrl_state *state;
struct list_head dt_maps;
};
/**
......@@ -100,7 +103,8 @@ struct pinctrl_setting_configs {
* struct pinctrl_setting - an individual mux or config setting
* @node: list node for struct pinctrl_settings's @settings field
* @type: the type of setting
* @pctldev: pin control device handling to be programmed
* @pctldev: pin control device handling to be programmed. Not used for
* PIN_MAP_TYPE_DUMMY_STATE.
* @data: Data specific to the setting type
*/
struct pinctrl_setting {
......@@ -144,6 +148,7 @@ struct pin_desc {
struct pinctrl_dev *get_pinctrl_dev_from_devname(const char *dev_name);
int pin_get_from_name(struct pinctrl_dev *pctldev, const char *name);
const char *pin_get_name(struct pinctrl_dev *pctldev, const unsigned pin);
int pinctrl_get_group_selector(struct pinctrl_dev *pctldev,
const char *pin_group);
......@@ -153,4 +158,9 @@ static inline struct pin_desc *pin_desc_get(struct pinctrl_dev *pctldev,
return radix_tree_lookup(&pctldev->pin_desc_tree, pin);
}
int pinctrl_register_map(struct pinctrl_map const *maps, unsigned num_maps,
bool dup, bool locked);
void pinctrl_unregister_map(struct pinctrl_map const *map);
extern struct mutex pinctrl_mutex;
extern struct list_head pinctrldev_list;
/*
* Device tree integration for the pin control subsystem
*
* Copyright (C) 2012 NVIDIA CORPORATION. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms and conditions of the GNU General Public License,
* version 2, as published by the Free Software Foundation.
*
* This program is distributed in the hope it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include <linux/device.h>
#include <linux/of.h>
#include <linux/pinctrl/pinctrl.h>
#include <linux/slab.h>
#include "core.h"
#include "devicetree.h"
/**
* struct pinctrl_dt_map - mapping table chunk parsed from device tree
* @node: list node for struct pinctrl's @dt_maps field
* @pctldev: the pin controller that allocated this struct, and will free it
* @maps: the mapping table entries
*/
struct pinctrl_dt_map {
struct list_head node;
struct pinctrl_dev *pctldev;
struct pinctrl_map *map;
unsigned num_maps;
};
static void dt_free_map(struct pinctrl_dev *pctldev,
struct pinctrl_map *map, unsigned num_maps)
{
if (pctldev) {
struct pinctrl_ops *ops = pctldev->desc->pctlops;
ops->dt_free_map(pctldev, map, num_maps);
} else {
/* There is no pctldev for PIN_MAP_TYPE_DUMMY_STATE */
kfree(map);
}
}
void pinctrl_dt_free_maps(struct pinctrl *p)
{
struct pinctrl_dt_map *dt_map, *n1;
list_for_each_entry_safe(dt_map, n1, &p->dt_maps, node) {
pinctrl_unregister_map(dt_map->map);
list_del(&dt_map->node);
dt_free_map(dt_map->pctldev, dt_map->map,
dt_map->num_maps);
kfree(dt_map);
}
of_node_put(p->dev->of_node);
}
static int dt_remember_or_free_map(struct pinctrl *p, const char *statename,
struct pinctrl_dev *pctldev,
struct pinctrl_map *map, unsigned num_maps)
{
int i;
struct pinctrl_dt_map *dt_map;
/* Initialize common mapping table entry fields */
for (i = 0; i < num_maps; i++) {
map[i].dev_name = dev_name(p->dev);
map[i].name = statename;
if (pctldev)
map[i].ctrl_dev_name = dev_name(pctldev->dev);
}
/* Remember the converted mapping table entries */
dt_map = kzalloc(sizeof(*dt_map), GFP_KERNEL);
if (!dt_map) {
dev_err(p->dev, "failed to alloc struct pinctrl_dt_map\n");
dt_free_map(pctldev, map, num_maps);
return -ENOMEM;
}
dt_map->pctldev = pctldev;
dt_map->map = map;
dt_map->num_maps = num_maps;
list_add_tail(&dt_map->node, &p->dt_maps);
return pinctrl_register_map(map, num_maps, false, true);
}
static struct pinctrl_dev *find_pinctrl_by_of_node(struct device_node *np)
{
struct pinctrl_dev *pctldev;
list_for_each_entry(pctldev, &pinctrldev_list, node)
if (pctldev->dev->of_node == np)
return pctldev;
return NULL;
}
static int dt_to_map_one_config(struct pinctrl *p, const char *statename,
struct device_node *np_config)
{
struct device_node *np_pctldev;
struct pinctrl_dev *pctldev;
struct pinctrl_ops *ops;
int ret;
struct pinctrl_map *map;
unsigned num_maps;
/* Find the pin controller containing np_config */
np_pctldev = of_node_get(np_config);
for (;;) {
np_pctldev = of_get_next_parent(np_pctldev);
if (!np_pctldev || of_node_is_root(np_pctldev)) {
dev_info(p->dev, "could not find pctldev for node %s, deferring probe\n",
np_config->full_name);
of_node_put(np_pctldev);
/* OK let's just assume this will appear later then */
return -EPROBE_DEFER;
}
pctldev = find_pinctrl_by_of_node(np_pctldev);
if (pctldev)
break;
}
of_node_put(np_pctldev);
/*
* Call pinctrl driver to parse device tree node, and
* generate mapping table entries
*/
ops = pctldev->desc->pctlops;
if (!ops->dt_node_to_map) {
dev_err(p->dev, "pctldev %s doesn't support DT\n",
dev_name(pctldev->dev));
return -ENODEV;
}
ret = ops->dt_node_to_map(pctldev, np_config, &map, &num_maps);
if (ret < 0)
return ret;
/* Stash the mapping table chunk away for later use */
return dt_remember_or_free_map(p, statename, pctldev, map, num_maps);
}
static int dt_remember_dummy_state(struct pinctrl *p, const char *statename)
{
struct pinctrl_map *map;
map = kzalloc(sizeof(*map), GFP_KERNEL);
if (!map) {
dev_err(p->dev, "failed to alloc struct pinctrl_map\n");
return -ENOMEM;
}
/* There is no pctldev for PIN_MAP_TYPE_DUMMY_STATE */
map->type = PIN_MAP_TYPE_DUMMY_STATE;
return dt_remember_or_free_map(p, statename, NULL, map, 1);
}
int pinctrl_dt_to_map(struct pinctrl *p)
{
struct device_node *np = p->dev->of_node;
int state, ret;
char *propname;
struct property *prop;
const char *statename;
const __be32 *list;
int size, config;
phandle phandle;
struct device_node *np_config;
/* CONFIG_OF enabled, p->dev not instantiated from DT */
if (!np) {
dev_dbg(p->dev, "no of_node; not parsing pinctrl DT\n");
return 0;
}
/* We may store pointers to property names within the node */
of_node_get(np);
/* For each defined state ID */
for (state = 0; ; state++) {
/* Retrieve the pinctrl-* property */
propname = kasprintf(GFP_KERNEL, "pinctrl-%d", state);
prop = of_find_property(np, propname, &size);
kfree(propname);
if (!prop)
break;
list = prop->value;
size /= sizeof(*list);
/* Determine whether pinctrl-names property names the state */
ret = of_property_read_string_index(np, "pinctrl-names",
state, &statename);
/*
* If not, statename is just the integer state ID. But rather
* than dynamically allocate it and have to free it later,
* just point part way into the property name for the string.
*/
if (ret < 0) {
/* strlen("pinctrl-") == 8 */
statename = prop->name + 8;
}
/* For every referenced pin configuration node in it */
for (config = 0; config < size; config++) {
phandle = be32_to_cpup(list++);
/* Look up the pin configuration node */
np_config = of_find_node_by_phandle(phandle);
if (!np_config) {
dev_err(p->dev,
"prop %s index %i invalid phandle\n",
prop->name, config);
ret = -EINVAL;
goto err;
}
/* Parse the node */
ret = dt_to_map_one_config(p, statename, np_config);
of_node_put(np_config);
if (ret < 0)
goto err;
}
/* No entries in DT? Generate a dummy state table entry */
if (!size) {
ret = dt_remember_dummy_state(p, statename);
if (ret < 0)
goto err;
}
}
return 0;
err:
pinctrl_dt_free_maps(p);
return ret;
}
/*
* Internal interface to pinctrl device tree integration
*
* Copyright (C) 2012 NVIDIA CORPORATION. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms and conditions of the GNU General Public License,
* version 2, as published by the Free Software Foundation.
*
* This program is distributed in the hope it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#ifdef CONFIG_OF
void pinctrl_dt_free_maps(struct pinctrl *p);
int pinctrl_dt_to_map(struct pinctrl *p);
#else
static inline int pinctrl_dt_to_map(struct pinctrl *p)
{
return 0;
}
static inline void pinctrl_dt_free_maps(struct pinctrl *p)
{
}
#endif
......@@ -28,11 +28,17 @@ int pinconf_check_ops(struct pinctrl_dev *pctldev)
const struct pinconf_ops *ops = pctldev->desc->confops;
/* We must be able to read out pin status */
if (!ops->pin_config_get && !ops->pin_config_group_get)
if (!ops->pin_config_get && !ops->pin_config_group_get) {
dev_err(pctldev->dev,
"pinconf must be able to read out pin status\n");
return -EINVAL;
}
/* We have to be able to config the pins in SOME way */
if (!ops->pin_config_set && !ops->pin_config_group_set)
if (!ops->pin_config_set && !ops->pin_config_group_set) {
dev_err(pctldev->dev,
"pinconf has to be able to set a pins config\n");
return -EINVAL;
}
return 0;
}
......@@ -379,8 +385,16 @@ int pinconf_apply_setting(struct pinctrl_setting const *setting)
void pinconf_show_map(struct seq_file *s, struct pinctrl_map const *map)
{
struct pinctrl_dev *pctldev;
const struct pinconf_ops *confops;
int i;
pctldev = get_pinctrl_dev_from_devname(map->ctrl_dev_name);
if (pctldev)
confops = pctldev->desc->confops;
else
confops = NULL;
switch (map->type) {
case PIN_MAP_TYPE_CONFIGS_PIN:
seq_printf(s, "pin ");
......@@ -394,8 +408,15 @@ void pinconf_show_map(struct seq_file *s, struct pinctrl_map const *map)
seq_printf(s, "%s\n", map->data.configs.group_or_pin);
for (i = 0; i < map->data.configs.num_configs; i++)
seq_printf(s, "config %08lx\n", map->data.configs.configs[i]);
for (i = 0; i < map->data.configs.num_configs; i++) {
seq_printf(s, "config ");
if (confops && confops->pin_config_config_dbg_show)
confops->pin_config_config_dbg_show(pctldev, s,
map->data.configs.configs[i]);
else
seq_printf(s, "%08lx", map->data.configs.configs[i]);
seq_printf(s, "\n");
}
}
void pinconf_show_setting(struct seq_file *s,
......@@ -403,6 +424,7 @@ void pinconf_show_setting(struct seq_file *s,
{
struct pinctrl_dev *pctldev = setting->pctldev;
const struct pinctrl_ops *pctlops = pctldev->desc->pctlops;
const struct pinconf_ops *confops = pctldev->desc->confops;
struct pin_desc *desc;
int i;
......@@ -428,8 +450,15 @@ void pinconf_show_setting(struct seq_file *s,
* FIXME: We should really get the pin controler to dump the config
* values, so they can be decoded to something meaningful.
*/
for (i = 0; i < setting->data.configs.num_configs; i++)
seq_printf(s, " %08lx", setting->data.configs.configs[i]);
for (i = 0; i < setting->data.configs.num_configs; i++) {
seq_printf(s, " ");
if (confops && confops->pin_config_config_dbg_show)
confops->pin_config_config_dbg_show(pctldev, s,
setting->data.configs.configs[i]);
else
seq_printf(s, "%08lx",
setting->data.configs.configs[i]);
}
seq_printf(s, "\n");
}
......@@ -448,10 +477,14 @@ static void pinconf_dump_pin(struct pinctrl_dev *pctldev,
static int pinconf_pins_show(struct seq_file *s, void *what)
{
struct pinctrl_dev *pctldev = s->private;
const struct pinconf_ops *ops = pctldev->desc->confops;
unsigned i, pin;
if (!ops || !ops->pin_config_get)
return 0;
seq_puts(s, "Pin config settings per pin\n");
seq_puts(s, "Format: pin (name): pinmux setting array\n");
seq_puts(s, "Format: pin (name): configs\n");
mutex_lock(&pinctrl_mutex);
......@@ -495,17 +528,18 @@ static int pinconf_groups_show(struct seq_file *s, void *what)
struct pinctrl_dev *pctldev = s->private;
const struct pinctrl_ops *pctlops = pctldev->desc->pctlops;
const struct pinconf_ops *ops = pctldev->desc->confops;
unsigned ngroups = pctlops->get_groups_count(pctldev);
unsigned selector = 0;
if (!ops || !ops->pin_config_group_get)
return 0;
seq_puts(s, "Pin config settings per pin group\n");
seq_puts(s, "Format: group (name): pinmux setting array\n");
seq_puts(s, "Format: group (name): configs\n");
mutex_lock(&pinctrl_mutex);
while (pctlops->list_groups(pctldev, selector) >= 0) {
while (selector < ngroups) {
const char *gname = pctlops->get_group_name(pctldev, selector);
seq_printf(s, "%u (%s):", selector, gname);
......
......@@ -19,11 +19,6 @@ int pinconf_map_to_setting(struct pinctrl_map const *map,
struct pinctrl_setting *setting);
void pinconf_free_setting(struct pinctrl_setting const *setting);
int pinconf_apply_setting(struct pinctrl_setting const *setting);
void pinconf_show_map(struct seq_file *s, struct pinctrl_map const *map);
void pinconf_show_setting(struct seq_file *s,
struct pinctrl_setting const *setting);
void pinconf_init_device_debugfs(struct dentry *devroot,
struct pinctrl_dev *pctldev);
/*
* You will only be interested in these if you're using PINCONF
......@@ -61,6 +56,18 @@ static inline int pinconf_apply_setting(struct pinctrl_setting const *setting)
return 0;
}
#endif
#if defined(CONFIG_PINCONF) && defined(CONFIG_DEBUG_FS)
void pinconf_show_map(struct seq_file *s, struct pinctrl_map const *map);
void pinconf_show_setting(struct seq_file *s,
struct pinctrl_setting const *setting);
void pinconf_init_device_debugfs(struct dentry *devroot,
struct pinctrl_dev *pctldev);
#else
static inline void pinconf_show_map(struct seq_file *s,
struct pinctrl_map const *map)
{
......
......@@ -174,7 +174,7 @@ struct u300_gpio_confdata {
/* Initial configuration */
static const struct __initdata u300_gpio_confdata
static const struct __initconst u300_gpio_confdata
bs335_gpio_config[BS335_GPIO_NUM_PORTS][U300_GPIO_PINS_PER_PORT] = {
/* Port 0, pins 0-7 */
{
......@@ -255,7 +255,7 @@ bs335_gpio_config[BS335_GPIO_NUM_PORTS][U300_GPIO_PINS_PER_PORT] = {
}
};
static const struct __initdata u300_gpio_confdata
static const struct __initconst u300_gpio_confdata
bs365_gpio_config[BS365_GPIO_NUM_PORTS][U300_GPIO_PINS_PER_PORT] = {
/* Port 0, pins 0-7 */
{
......
This diff is collapsed.
/*
* IMX pinmux core definitions
*
* Copyright (C) 2012 Freescale Semiconductor, Inc.
* Copyright (C) 2012 Linaro Ltd.
*
* Author: Dong Aisheng <dong.aisheng@linaro.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*/
#ifndef __DRIVERS_PINCTRL_IMX_H
#define __DRIVERS_PINCTRL_IMX_H
struct platform_device;
/**
* struct imx_pin_group - describes an IMX pin group
* @name: the name of this specific pin group
* @pins: an array of discrete physical pins used in this group, taken
* from the driver-local pin enumeration space
* @npins: the number of pins in this group array, i.e. the number of
* elements in .pins so we can iterate over that array
* @mux_mode: the mux mode for each pin in this group. The size of this
* array is the same as pins.
* @configs: the config for each pin in this group. The size of this
* array is the same as pins.
*/
struct imx_pin_group {
const char *name;
unsigned int *pins;
unsigned npins;
unsigned int *mux_mode;
unsigned long *configs;
};
/**
* struct imx_pmx_func - describes IMX pinmux functions
* @name: the name of this specific function
* @groups: corresponding pin groups
* @num_groups: the number of groups
*/
struct imx_pmx_func {
const char *name;
const char **groups;
unsigned num_groups;
};
/**
* struct imx_pin_reg - describe a pin reg map
* The last 3 members are used for select input setting
* @pid: pin id
* @mux_reg: mux register offset
* @conf_reg: config register offset
* @mux_mode: mux mode
* @input_reg: select input register offset for this mux if any
* 0 if no select input setting needed.
* @input_val: the value set to select input register
*/
struct imx_pin_reg {
u16 pid;
u16 mux_reg;
u16 conf_reg;
u8 mux_mode;
u16 input_reg;
u8 input_val;
};
struct imx_pinctrl_soc_info {
struct device *dev;
const struct pinctrl_pin_desc *pins;
unsigned int npins;
const struct imx_pin_reg *pin_regs;
unsigned int npin_regs;
struct imx_pin_group *groups;
unsigned int ngroups;
struct imx_pmx_func *functions;
unsigned int nfunctions;
};
#define NO_MUX 0x0
#define NO_PAD 0x0
#define IMX_PIN_REG(id, conf, mux, mode, input, val) \
{ \
.pid = id, \
.conf_reg = conf, \
.mux_reg = mux, \
.mux_mode = mode, \
.input_reg = input, \
.input_val = val, \
}
#define IMX_PINCTRL_PIN(pin) PINCTRL_PIN(pin, #pin)
#define PAD_CTL_MASK(len) ((1 << len) - 1)
#define IMX_MUX_MASK 0x7
#define IOMUXC_CONFIG_SION (0x1 << 4)
int imx_pinctrl_probe(struct platform_device *pdev,
struct imx_pinctrl_soc_info *info);
int imx_pinctrl_remove(struct platform_device *pdev);
#endif /* __DRIVERS_PINCTRL_IMX_H */
/*
* Copyright 2012 Freescale Semiconductor, Inc.
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License
* Version 2 or later at the following locations:
*
* http://www.opensource.org/licenses/gpl-license.html
* http://www.gnu.org/copyleft/gpl.html
*/
#include <linux/init.h>
#include <linux/module.h>
#include <linux/of_device.h>
#include <linux/pinctrl/pinctrl.h>
#include "pinctrl-mxs.h"
enum imx23_pin_enum {
GPMI_D00 = PINID(0, 0),
GPMI_D01 = PINID(0, 1),
GPMI_D02 = PINID(0, 2),
GPMI_D03 = PINID(0, 3),
GPMI_D04 = PINID(0, 4),
GPMI_D05 = PINID(0, 5),
GPMI_D06 = PINID(0, 6),
GPMI_D07 = PINID(0, 7),
GPMI_D08 = PINID(0, 8),
GPMI_D09 = PINID(0, 9),
GPMI_D10 = PINID(0, 10),
GPMI_D11 = PINID(0, 11),
GPMI_D12 = PINID(0, 12),
GPMI_D13 = PINID(0, 13),
GPMI_D14 = PINID(0, 14),
GPMI_D15 = PINID(0, 15),
GPMI_CLE = PINID(0, 16),
GPMI_ALE = PINID(0, 17),
GPMI_CE2N = PINID(0, 18),
GPMI_RDY0 = PINID(0, 19),
GPMI_RDY1 = PINID(0, 20),
GPMI_RDY2 = PINID(0, 21),
GPMI_RDY3 = PINID(0, 22),
GPMI_WPN = PINID(0, 23),
GPMI_WRN = PINID(0, 24),
GPMI_RDN = PINID(0, 25),
AUART1_CTS = PINID(0, 26),
AUART1_RTS = PINID(0, 27),
AUART1_RX = PINID(0, 28),
AUART1_TX = PINID(0, 29),
I2C_SCL = PINID(0, 30),
I2C_SDA = PINID(0, 31),
LCD_D00 = PINID(1, 0),
LCD_D01 = PINID(1, 1),
LCD_D02 = PINID(1, 2),
LCD_D03 = PINID(1, 3),
LCD_D04 = PINID(1, 4),
LCD_D05 = PINID(1, 5),
LCD_D06 = PINID(1, 6),
LCD_D07 = PINID(1, 7),
LCD_D08 = PINID(1, 8),
LCD_D09 = PINID(1, 9),
LCD_D10 = PINID(1, 10),
LCD_D11 = PINID(1, 11),
LCD_D12 = PINID(1, 12),
LCD_D13 = PINID(1, 13),
LCD_D14 = PINID(1, 14),
LCD_D15 = PINID(1, 15),
LCD_D16 = PINID(1, 16),
LCD_D17 = PINID(1, 17),
LCD_RESET = PINID(1, 18),
LCD_RS = PINID(1, 19),
LCD_WR = PINID(1, 20),
LCD_CS = PINID(1, 21),
LCD_DOTCK = PINID(1, 22),
LCD_ENABLE = PINID(1, 23),
LCD_HSYNC = PINID(1, 24),
LCD_VSYNC = PINID(1, 25),
PWM0 = PINID(1, 26),
PWM1 = PINID(1, 27),
PWM2 = PINID(1, 28),
PWM3 = PINID(1, 29),
PWM4 = PINID(1, 30),
SSP1_CMD = PINID(2, 0),
SSP1_DETECT = PINID(2, 1),
SSP1_DATA0 = PINID(2, 2),
SSP1_DATA1 = PINID(2, 3),
SSP1_DATA2 = PINID(2, 4),
SSP1_DATA3 = PINID(2, 5),
SSP1_SCK = PINID(2, 6),
ROTARYA = PINID(2, 7),
ROTARYB = PINID(2, 8),
EMI_A00 = PINID(2, 9),
EMI_A01 = PINID(2, 10),
EMI_A02 = PINID(2, 11),
EMI_A03 = PINID(2, 12),
EMI_A04 = PINID(2, 13),
EMI_A05 = PINID(2, 14),
EMI_A06 = PINID(2, 15),
EMI_A07 = PINID(2, 16),
EMI_A08 = PINID(2, 17),
EMI_A09 = PINID(2, 18),
EMI_A10 = PINID(2, 19),
EMI_A11 = PINID(2, 20),
EMI_A12 = PINID(2, 21),
EMI_BA0 = PINID(2, 22),
EMI_BA1 = PINID(2, 23),
EMI_CASN = PINID(2, 24),
EMI_CE0N = PINID(2, 25),
EMI_CE1N = PINID(2, 26),
GPMI_CE1N = PINID(2, 27),
GPMI_CE0N = PINID(2, 28),
EMI_CKE = PINID(2, 29),
EMI_RASN = PINID(2, 30),
EMI_WEN = PINID(2, 31),
EMI_D00 = PINID(3, 0),
EMI_D01 = PINID(3, 1),
EMI_D02 = PINID(3, 2),
EMI_D03 = PINID(3, 3),
EMI_D04 = PINID(3, 4),
EMI_D05 = PINID(3, 5),
EMI_D06 = PINID(3, 6),
EMI_D07 = PINID(3, 7),
EMI_D08 = PINID(3, 8),
EMI_D09 = PINID(3, 9),
EMI_D10 = PINID(3, 10),
EMI_D11 = PINID(3, 11),
EMI_D12 = PINID(3, 12),
EMI_D13 = PINID(3, 13),
EMI_D14 = PINID(3, 14),
EMI_D15 = PINID(3, 15),
EMI_DQM0 = PINID(3, 16),
EMI_DQM1 = PINID(3, 17),
EMI_DQS0 = PINID(3, 18),
EMI_DQS1 = PINID(3, 19),
EMI_CLK = PINID(3, 20),
EMI_CLKN = PINID(3, 21),
};
static const struct pinctrl_pin_desc imx23_pins[] = {
MXS_PINCTRL_PIN(GPMI_D00),
MXS_PINCTRL_PIN(GPMI_D01),
MXS_PINCTRL_PIN(GPMI_D02),
MXS_PINCTRL_PIN(GPMI_D03),
MXS_PINCTRL_PIN(GPMI_D04),
MXS_PINCTRL_PIN(GPMI_D05),
MXS_PINCTRL_PIN(GPMI_D06),
MXS_PINCTRL_PIN(GPMI_D07),
MXS_PINCTRL_PIN(GPMI_D08),
MXS_PINCTRL_PIN(GPMI_D09),
MXS_PINCTRL_PIN(GPMI_D10),
MXS_PINCTRL_PIN(GPMI_D11),
MXS_PINCTRL_PIN(GPMI_D12),
MXS_PINCTRL_PIN(GPMI_D13),
MXS_PINCTRL_PIN(GPMI_D14),
MXS_PINCTRL_PIN(GPMI_D15),
MXS_PINCTRL_PIN(GPMI_CLE),
MXS_PINCTRL_PIN(GPMI_ALE),
MXS_PINCTRL_PIN(GPMI_CE2N),
MXS_PINCTRL_PIN(GPMI_RDY0),
MXS_PINCTRL_PIN(GPMI_RDY1),
MXS_PINCTRL_PIN(GPMI_RDY2),
MXS_PINCTRL_PIN(GPMI_RDY3),
MXS_PINCTRL_PIN(GPMI_WPN),
MXS_PINCTRL_PIN(GPMI_WRN),
MXS_PINCTRL_PIN(GPMI_RDN),
MXS_PINCTRL_PIN(AUART1_CTS),
MXS_PINCTRL_PIN(AUART1_RTS),
MXS_PINCTRL_PIN(AUART1_RX),
MXS_PINCTRL_PIN(AUART1_TX),
MXS_PINCTRL_PIN(I2C_SCL),
MXS_PINCTRL_PIN(I2C_SDA),
MXS_PINCTRL_PIN(LCD_D00),
MXS_PINCTRL_PIN(LCD_D01),
MXS_PINCTRL_PIN(LCD_D02),
MXS_PINCTRL_PIN(LCD_D03),
MXS_PINCTRL_PIN(LCD_D04),
MXS_PINCTRL_PIN(LCD_D05),
MXS_PINCTRL_PIN(LCD_D06),
MXS_PINCTRL_PIN(LCD_D07),
MXS_PINCTRL_PIN(LCD_D08),
MXS_PINCTRL_PIN(LCD_D09),
MXS_PINCTRL_PIN(LCD_D10),
MXS_PINCTRL_PIN(LCD_D11),
MXS_PINCTRL_PIN(LCD_D12),
MXS_PINCTRL_PIN(LCD_D13),
MXS_PINCTRL_PIN(LCD_D14),
MXS_PINCTRL_PIN(LCD_D15),
MXS_PINCTRL_PIN(LCD_D16),
MXS_PINCTRL_PIN(LCD_D17),
MXS_PINCTRL_PIN(LCD_RESET),
MXS_PINCTRL_PIN(LCD_RS),
MXS_PINCTRL_PIN(LCD_WR),
MXS_PINCTRL_PIN(LCD_CS),
MXS_PINCTRL_PIN(LCD_DOTCK),
MXS_PINCTRL_PIN(LCD_ENABLE),
MXS_PINCTRL_PIN(LCD_HSYNC),
MXS_PINCTRL_PIN(LCD_VSYNC),
MXS_PINCTRL_PIN(PWM0),
MXS_PINCTRL_PIN(PWM1),
MXS_PINCTRL_PIN(PWM2),
MXS_PINCTRL_PIN(PWM3),
MXS_PINCTRL_PIN(PWM4),
MXS_PINCTRL_PIN(SSP1_CMD),
MXS_PINCTRL_PIN(SSP1_DETECT),
MXS_PINCTRL_PIN(SSP1_DATA0),
MXS_PINCTRL_PIN(SSP1_DATA1),
MXS_PINCTRL_PIN(SSP1_DATA2),
MXS_PINCTRL_PIN(SSP1_DATA3),
MXS_PINCTRL_PIN(SSP1_SCK),
MXS_PINCTRL_PIN(ROTARYA),
MXS_PINCTRL_PIN(ROTARYB),
MXS_PINCTRL_PIN(EMI_A00),
MXS_PINCTRL_PIN(EMI_A01),
MXS_PINCTRL_PIN(EMI_A02),
MXS_PINCTRL_PIN(EMI_A03),
MXS_PINCTRL_PIN(EMI_A04),
MXS_PINCTRL_PIN(EMI_A05),
MXS_PINCTRL_PIN(EMI_A06),
MXS_PINCTRL_PIN(EMI_A07),
MXS_PINCTRL_PIN(EMI_A08),
MXS_PINCTRL_PIN(EMI_A09),
MXS_PINCTRL_PIN(EMI_A10),
MXS_PINCTRL_PIN(EMI_A11),
MXS_PINCTRL_PIN(EMI_A12),
MXS_PINCTRL_PIN(EMI_BA0),
MXS_PINCTRL_PIN(EMI_BA1),
MXS_PINCTRL_PIN(EMI_CASN),
MXS_PINCTRL_PIN(EMI_CE0N),
MXS_PINCTRL_PIN(EMI_CE1N),
MXS_PINCTRL_PIN(GPMI_CE1N),
MXS_PINCTRL_PIN(GPMI_CE0N),
MXS_PINCTRL_PIN(EMI_CKE),
MXS_PINCTRL_PIN(EMI_RASN),
MXS_PINCTRL_PIN(EMI_WEN),
MXS_PINCTRL_PIN(EMI_D00),
MXS_PINCTRL_PIN(EMI_D01),
MXS_PINCTRL_PIN(EMI_D02),
MXS_PINCTRL_PIN(EMI_D03),
MXS_PINCTRL_PIN(EMI_D04),
MXS_PINCTRL_PIN(EMI_D05),
MXS_PINCTRL_PIN(EMI_D06),
MXS_PINCTRL_PIN(EMI_D07),
MXS_PINCTRL_PIN(EMI_D08),
MXS_PINCTRL_PIN(EMI_D09),
MXS_PINCTRL_PIN(EMI_D10),
MXS_PINCTRL_PIN(EMI_D11),
MXS_PINCTRL_PIN(EMI_D12),
MXS_PINCTRL_PIN(EMI_D13),
MXS_PINCTRL_PIN(EMI_D14),
MXS_PINCTRL_PIN(EMI_D15),
MXS_PINCTRL_PIN(EMI_DQM0),
MXS_PINCTRL_PIN(EMI_DQM1),
MXS_PINCTRL_PIN(EMI_DQS0),
MXS_PINCTRL_PIN(EMI_DQS1),
MXS_PINCTRL_PIN(EMI_CLK),
MXS_PINCTRL_PIN(EMI_CLKN),
};
static struct mxs_regs imx23_regs = {
.muxsel = 0x100,
.drive = 0x200,
.pull = 0x400,
};
static struct mxs_pinctrl_soc_data imx23_pinctrl_data = {
.regs = &imx23_regs,
.pins = imx23_pins,
.npins = ARRAY_SIZE(imx23_pins),
};
static int __devinit imx23_pinctrl_probe(struct platform_device *pdev)
{
return mxs_pinctrl_probe(pdev, &imx23_pinctrl_data);
}
static struct of_device_id imx23_pinctrl_of_match[] __devinitdata = {
{ .compatible = "fsl,imx23-pinctrl", },
{ /* sentinel */ }
};
MODULE_DEVICE_TABLE(of, imx23_pinctrl_of_match);
static struct platform_driver imx23_pinctrl_driver = {
.driver = {
.name = "imx23-pinctrl",
.owner = THIS_MODULE,
.of_match_table = imx23_pinctrl_of_match,
},
.probe = imx23_pinctrl_probe,
.remove = __devexit_p(mxs_pinctrl_remove),
};
static int __init imx23_pinctrl_init(void)
{
return platform_driver_register(&imx23_pinctrl_driver);
}
arch_initcall(imx23_pinctrl_init);
static void __exit imx23_pinctrl_exit(void)
{
platform_driver_unregister(&imx23_pinctrl_driver);
}
module_exit(imx23_pinctrl_exit);
MODULE_AUTHOR("Shawn Guo <shawn.guo@linaro.org>");
MODULE_DESCRIPTION("Freescale i.MX23 pinctrl driver");
MODULE_LICENSE("GPL v2");
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
/*
* Copyright 2012 Freescale Semiconductor, Inc.
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License
* Version 2 or later at the following locations:
*
* http://www.opensource.org/licenses/gpl-license.html
* http://www.gnu.org/copyleft/gpl.html
*/
#ifndef __PINCTRL_MXS_H
#define __PINCTRL_MXS_H
#include <linux/platform_device.h>
#include <linux/pinctrl/pinctrl.h>
#define SET 0x4
#define CLR 0x8
#define TOG 0xc
#define MXS_PINCTRL_PIN(pin) PINCTRL_PIN(pin, #pin)
#define PINID(bank, pin) ((bank) * 32 + (pin))
/*
* pinmux-id bit field definitions
*
* bank: 15..12 (4)
* pin: 11..4 (8)
* muxsel: 3..0 (4)
*/
#define MUXID_TO_PINID(m) PINID((m) >> 12 & 0xf, (m) >> 4 & 0xff)
#define MUXID_TO_MUXSEL(m) ((m) & 0xf)
#define PINID_TO_BANK(p) ((p) >> 5)
#define PINID_TO_PIN(p) ((p) % 32)
/*
* pin config bit field definitions
*
* pull-up: 6..5 (2)
* voltage: 4..3 (2)
* mA: 2..0 (3)
*
* MSB of each field is presence bit for the config.
*/
#define PULL_PRESENT (1 << 6)
#define PULL_SHIFT 5
#define VOL_PRESENT (1 << 4)
#define VOL_SHIFT 3
#define MA_PRESENT (1 << 2)
#define MA_SHIFT 0
#define CONFIG_TO_PULL(c) ((c) >> PULL_SHIFT & 0x1)
#define CONFIG_TO_VOL(c) ((c) >> VOL_SHIFT & 0x1)
#define CONFIG_TO_MA(c) ((c) >> MA_SHIFT & 0x3)
struct mxs_function {
const char *name;
const char **groups;
unsigned ngroups;
};
struct mxs_group {
const char *name;
unsigned int *pins;
unsigned npins;
u8 *muxsel;
u8 config;
};
struct mxs_regs {
u16 muxsel;
u16 drive;
u16 pull;
};
struct mxs_pinctrl_soc_data {
const struct mxs_regs *regs;
const struct pinctrl_pin_desc *pins;
unsigned npins;
struct mxs_function *functions;
unsigned nfunctions;
struct mxs_group *groups;
unsigned ngroups;
};
int mxs_pinctrl_probe(struct platform_device *pdev,
struct mxs_pinctrl_soc_data *soc);
int mxs_pinctrl_remove(struct platform_device *pdev);
#endif /* __PINCTRL_MXS_H */
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
......@@ -31,12 +31,6 @@ void pinmux_free_setting(struct pinctrl_setting const *setting);
int pinmux_enable_setting(struct pinctrl_setting const *setting);
void pinmux_disable_setting(struct pinctrl_setting const *setting);
void pinmux_show_map(struct seq_file *s, struct pinctrl_map const *map);
void pinmux_show_setting(struct seq_file *s,
struct pinctrl_setting const *setting);
void pinmux_init_device_debugfs(struct dentry *devroot,
struct pinctrl_dev *pctldev);
#else
static inline int pinmux_check_ops(struct pinctrl_dev *pctldev)
......@@ -89,6 +83,18 @@ static inline void pinmux_disable_setting(
{
}
#endif
#if defined(CONFIG_PINMUX) && defined(CONFIG_DEBUG_FS)
void pinmux_show_map(struct seq_file *s, struct pinctrl_map const *map);
void pinmux_show_setting(struct seq_file *s,
struct pinctrl_setting const *setting);
void pinmux_init_device_debugfs(struct dentry *devroot,
struct pinctrl_dev *pctldev);
#else
static inline void pinmux_show_map(struct seq_file *s,
struct pinctrl_map const *map)
{
......
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment