spi: mediatek: skip delays if they are 0

In the function 'mtk_spi_set_hw_cs_timing'
the 'setup', 'hold' and 'inactive' delays are configured.
In case those values are 0 it causes errors on mt8173:

cros-ec-i2c-tunnel 1100a000.spi:ec@0:i2c-tunnel0:
	Error transferring EC i2c message -71
cros-ec-spi spi0.0: EC failed to respond in time.

This patch fixes that issues by setting only the values
that are not 0.

Fixes: 04e6bb0d ("spi: modify set_cs_timing parameter")
Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
Link: https://lore.kernel.org/r/20211001152153.4604-1-dafna.hirschfeld@collabora.comSigned-off-by: Mark Brown <broonie@kernel.org>

drivers/spi/spi-mt65xx.c

@@ -233,36 +233,44 @@ static int mtk_spi_set_hw_cs_timing(struct spi_device *spi)
 		return delay;
 	inactive = (delay * DIV_ROUND_UP(mdata->spi_clk_hz, 1000000)) / 1000;
 
-	setup    = setup ? setup : 1;
-	hold     = hold ? hold : 1;
-	inactive = inactive ? inactive : 1;
-
+	if (hold || setup) {
 		reg_val = readl(mdata->base + SPI_CFG0_REG);
 		if (mdata->dev_comp->enhance_timing) {
+			if (hold) {
 				hold = min_t(u32, hold, 0x10000);
-		setup = min_t(u32, setup, 0x10000);
 				reg_val &= ~(0xffff << SPI_ADJUST_CFG0_CS_HOLD_OFFSET);
 				reg_val |= (((hold - 1) & 0xffff)
 					<< SPI_ADJUST_CFG0_CS_HOLD_OFFSET);
+			}
+			if (setup) {
+				setup = min_t(u32, setup, 0x10000);
 				reg_val &= ~(0xffff << SPI_ADJUST_CFG0_CS_SETUP_OFFSET);
 				reg_val |= (((setup - 1) & 0xffff)
 					<< SPI_ADJUST_CFG0_CS_SETUP_OFFSET);
+			}
 		} else {
+			if (hold) {
 				hold = min_t(u32, hold, 0x100);
-		setup = min_t(u32, setup, 0x100);
 				reg_val &= ~(0xff << SPI_CFG0_CS_HOLD_OFFSET);
 				reg_val |= (((hold - 1) & 0xff) << SPI_CFG0_CS_HOLD_OFFSET);
+			}
+			if (setup) {
+				setup = min_t(u32, setup, 0x100);
 				reg_val &= ~(0xff << SPI_CFG0_CS_SETUP_OFFSET);
 				reg_val |= (((setup - 1) & 0xff)
 					<< SPI_CFG0_CS_SETUP_OFFSET);
 			}
+		}
 		writel(reg_val, mdata->base + SPI_CFG0_REG);
+	}
 
+	if (inactive) {
 		inactive = min_t(u32, inactive, 0x100);
 		reg_val = readl(mdata->base + SPI_CFG1_REG);
 		reg_val &= ~SPI_CFG1_CS_IDLE_MASK;
 		reg_val |= (((inactive - 1) & 0xff) << SPI_CFG1_CS_IDLE_OFFSET);
 		writel(reg_val, mdata->base + SPI_CFG1_REG);
+	}
 
 	return 0;
 }