Input: add driver for pixcir i2c touchscreens

This patch adds a driver for PIXCIR's I2C connected touchscreens.
Signed-off-by: Jianchun <jcbian@pixcir.com.cn>
Acked-by: Henrik Rydberg <rydberg@euromail.se>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>

drivers/input/touchscreen/Kconfig

@@ -458,6 +458,18 @@ config TOUCHSCREEN_UCB1400
 	  To compile this driver as a module, choose M here: the
 	  module will be called ucb1400_ts.
 
+config TOUCHSCREEN_PIXCIR
+	tristate "PIXCIR I2C touchscreens"
+	depends on I2C
+	help
+	  Say Y here if you have a pixcir i2c touchscreen
+	  controller.
+
+	  If unsure, say N.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called pixcir_i2c_ts.
+
 config TOUCHSCREEN_WM831X
 	tristate "Support for WM831x touchscreen controllers"
 	depends on MFD_WM831X

drivers/input/touchscreen/Makefile

@@ -41,6 +41,7 @@ obj-$(CONFIG_TOUCHSCREEN_HTCPEN)	+= htcpen.o
 obj-$(CONFIG_TOUCHSCREEN_USB_COMPOSITE)	+= usbtouchscreen.o
 obj-$(CONFIG_TOUCHSCREEN_PCAP)		+= pcap_ts.o
 obj-$(CONFIG_TOUCHSCREEN_PENMOUNT)	+= penmount.o
+obj-$(CONFIG_TOUCHSCREEN_PIXCIR)	+= pixcir_i2c_ts.o
 obj-$(CONFIG_TOUCHSCREEN_S3C2410)	+= s3c2410_ts.o
 obj-$(CONFIG_TOUCHSCREEN_ST1232)	+= st1232.o
 obj-$(CONFIG_TOUCHSCREEN_STMPE)		+= stmpe-ts.o

drivers/input/touchscreen/pixcir_i2c_ts.c

+/*
+ * Driver for Pixcir I2C touchscreen controllers.
+ *
+ * Copyright (C) 2010-2011 Pixcir, Inc.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public
+ * License along with this library; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+
+#include <linux/delay.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/slab.h>
+#include <linux/i2c.h>
+#include <linux/input.h>
+#include <linux/input/pixcir_ts.h>
+
+struct pixcir_i2c_ts_data {
+	struct i2c_client *client;
+	struct input_dev *input;
+	const struct pixcir_ts_platform_data *chip;
+	bool exiting;
+};
+
+static void pixcir_ts_poscheck(struct pixcir_i2c_ts_data *data)
+{
+	struct pixcir_i2c_ts_data *tsdata = data;
+	u8 rdbuf[10], wrbuf[1] = { 0 };
+	u8 touch;
+	int ret;
+
+	ret = i2c_master_send(tsdata->client, wrbuf, sizeof(wrbuf));
+	if (ret != sizeof(wrbuf)) {
+		dev_err(&tsdata->client->dev,
+			"%s: i2c_master_send failed(), ret=%d\n",
+			__func__, ret);
+		return;
+	}
+
+	ret = i2c_master_recv(tsdata->client, rdbuf, sizeof(rdbuf));
+	if (ret != sizeof(rdbuf)) {
+		dev_err(&tsdata->client->dev,
+			"%s: i2c_master_recv failed(), ret=%d\n",
+			__func__, ret);
+		return;
+	}
+
+	touch = rdbuf[0];
+	if (touch) {
+		u16 posx1 = (rdbuf[3] << 8) | rdbuf[2];
+		u16 posy1 = (rdbuf[5] << 8) | rdbuf[4];
+		u16 posx2 = (rdbuf[7] << 8) | rdbuf[6];
+		u16 posy2 = (rdbuf[9] << 8) | rdbuf[8];
+
+		input_report_key(tsdata->input, BTN_TOUCH, 1);
+		input_report_abs(tsdata->input, ABS_X, posx1);
+		input_report_abs(tsdata->input, ABS_Y, posy1);
+
+		input_report_abs(tsdata->input, ABS_MT_POSITION_X, posx1);
+		input_report_abs(tsdata->input, ABS_MT_POSITION_Y, posy1);
+		input_mt_sync(tsdata->input);
+
+		if (touch == 2) {
+			input_report_abs(tsdata->input,
+					 ABS_MT_POSITION_X, posx2);
+			input_report_abs(tsdata->input,
+					 ABS_MT_POSITION_Y, posy2);
+			input_mt_sync(tsdata->input);
+		}
+	} else {
+		input_report_key(tsdata->input, BTN_TOUCH, 0);
+	}
+
+	input_sync(tsdata->input);
+}
+
+static irqreturn_t pixcir_ts_isr(int irq, void *dev_id)
+{
+	struct pixcir_i2c_ts_data *tsdata = dev_id;
+
+	while (!tsdata->exiting) {
+		pixcir_ts_poscheck(tsdata);
+
+		if (tsdata->chip->attb_read_val())
+			break;
+
+		msleep(20);
+	}
+
+	return IRQ_HANDLED;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int pixcir_i2c_ts_suspend(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+
+	if (device_may_wakeup(&client->dev))
+		enable_irq_wake(client->irq);
+
+	return 0;
+}
+
+static int pixcir_i2c_ts_resume(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+
+	if (device_may_wakeup(&client->dev))
+		disable_irq_wake(client->irq);
+
+	return 0;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(pixcir_dev_pm_ops,
+			 pixcir_i2c_ts_suspend, pixcir_i2c_ts_resume);
+
+static int __devinit pixcir_i2c_ts_probe(struct i2c_client *client,
+					 const struct i2c_device_id *id)
+{
+	const struct pixcir_ts_platform_data *pdata = client->dev.platform_data;
+	struct pixcir_i2c_ts_data *tsdata;
+	struct input_dev *input;
+	int error;
+
+	if (!pdata) {
+		dev_err(&client->dev, "platform data not defined\n");
+		return -EINVAL;
+	}
+
+	tsdata = kzalloc(sizeof(*tsdata), GFP_KERNEL);
+	input = input_allocate_device();
+	if (!tsdata || !input) {
+		dev_err(&client->dev, "Failed to allocate driver data!\n");
+		error = -ENOMEM;
+		goto err_free_mem;
+	}
+
+	tsdata->client = client;
+	tsdata->input = input;
+	tsdata->chip = pdata;
+
+	input->name = client->name;
+	input->id.bustype = BUS_I2C;
+	input->dev.parent = &client->dev;
+
+	__set_bit(EV_KEY, input->evbit);
+	__set_bit(EV_ABS, input->evbit);
+	__set_bit(BTN_TOUCH, input->keybit);
+	input_set_abs_params(input, ABS_X, 0, pdata->x_max, 0, 0);
+	input_set_abs_params(input, ABS_Y, 0, pdata->y_max, 0, 0);
+	input_set_abs_params(input, ABS_MT_POSITION_X, 0, pdata->x_max, 0, 0);
+	input_set_abs_params(input, ABS_MT_POSITION_Y, 0, pdata->y_max, 0, 0);
+
+	input_set_drvdata(input, tsdata);
+
+	error = request_threaded_irq(client->irq, NULL, pixcir_ts_isr,
+				     IRQF_TRIGGER_FALLING,
+				     client->name, tsdata);
+	if (error) {
+		dev_err(&client->dev, "Unable to request touchscreen IRQ.\n");
+		goto err_free_mem;
+	}
+
+	error = input_register_device(input);
+	if (error)
+		goto err_free_irq;
+
+	i2c_set_clientdata(client, tsdata);
+	device_init_wakeup(&client->dev, 1);
+
+	return 0;
+
+err_free_irq:
+	free_irq(client->irq, tsdata);
+err_free_mem:
+	input_free_device(input);
+	kfree(tsdata);
+	return error;
+}
+
+static int __devexit pixcir_i2c_ts_remove(struct i2c_client *client)
+{
+	struct pixcir_i2c_ts_data *tsdata = i2c_get_clientdata(client);
+
+	device_init_wakeup(&client->dev, 0);
+
+	tsdata->exiting = true;
+	mb();
+	free_irq(client->irq, tsdata);
+
+	input_unregister_device(tsdata->input);
+	kfree(tsdata);
+
+	return 0;
+}
+
+static const struct i2c_device_id pixcir_i2c_ts_id[] = {
+	{ "pixcir_ts", 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, pixcir_i2c_ts_id);
+
+static struct i2c_driver pixcir_i2c_ts_driver = {
+	.driver = {
+		.owner	= THIS_MODULE,
+		.name	= "pixcir_ts",
+		.pm	= &pixcir_dev_pm_ops,
+	},
+	.probe		= pixcir_i2c_ts_probe,
+	.remove		= __devexit_p(pixcir_i2c_ts_remove),
+	.id_table	= pixcir_i2c_ts_id,
+};
+
+static int __init pixcir_i2c_ts_init(void)
+{
+	return i2c_add_driver(&pixcir_i2c_ts_driver);
+}
+module_init(pixcir_i2c_ts_init);
+
+static void __exit pixcir_i2c_ts_exit(void)
+{
+	i2c_del_driver(&pixcir_i2c_ts_driver);
+}
+module_exit(pixcir_i2c_ts_exit);
+
+MODULE_AUTHOR("Jianchun Bian <jcbian@pixcir.com.cn>, Dequan Meng <dqmeng@pixcir.com.cn>");
+MODULE_DESCRIPTION("Pixcir I2C Touchscreen Driver");
+MODULE_LICENSE("GPL");

include/linux/input/pixcir_ts.h

+#ifndef	_PIXCIR_I2C_TS_H
+#define	_PIXCIR_I2C_TS_H
+
+struct pixcir_ts_platform_data {
+	int (*attb_read_val)(void);
+	int x_max;
+	int y_max;
+};
+
+#endif