Commit 36a39947 authored by Dan Williams's avatar Dan Williams Committed by James Bottomley

[SCSI] libsas: poll for ata device readiness after reset

Use ata_wait_after_reset() to poll for link recovery after a reset.
This combined with sas_ha->eh_mutex prevents expander rediscovery from
probing phys in an intermediate state.  Local discovery does not have a
mechanism to filter link status changes during this timeout, so it
remains the responsibility of lldds to prevent premature port teardown.
Although once all lldd's support ->lldd_ata_check_ready() that could be
used as a gate to local port teardown.

The signature fis is re-transmitted when the link comes back so we
should be revalidating the ata device class, but that is left to a future
patch.
Signed-off-by: default avatarDan Williams <dan.j.williams@intel.com>
Signed-off-by: default avatarJames Bottomley <JBottomley@Parallels.com>
parent 50824d6c
......@@ -272,39 +272,84 @@ static bool sas_ata_qc_fill_rtf(struct ata_queued_cmd *qc)
return true;
}
static struct sas_internal *dev_to_sas_internal(struct domain_device *dev)
{
return to_sas_internal(dev->port->ha->core.shost->transportt);
}
static int smp_ata_check_ready(struct ata_link *link)
{
int res;
u8 addr[8];
struct ata_port *ap = link->ap;
struct domain_device *dev = ap->private_data;
struct domain_device *ex_dev = dev->parent;
struct sas_phy *phy = sas_find_local_phy(dev);
res = sas_get_phy_attached_sas_addr(ex_dev, phy->number, addr);
/* break the wait early if the expander is unreachable,
* otherwise keep polling
*/
if (res == -ECOMM)
return res;
if (res != SMP_RESP_FUNC_ACC || SAS_ADDR(addr) == 0)
return 0;
else
return 1;
}
static int local_ata_check_ready(struct ata_link *link)
{
struct ata_port *ap = link->ap;
struct domain_device *dev = ap->private_data;
struct sas_internal *i = dev_to_sas_internal(dev);
if (i->dft->lldd_ata_check_ready)
return i->dft->lldd_ata_check_ready(dev);
else {
/* lldd's that don't implement 'ready' checking get the
* old default behavior of not coordinating reset
* recovery with libata
*/
return 1;
}
}
static int sas_ata_hard_reset(struct ata_link *link, unsigned int *class,
unsigned long deadline)
{
int ret = 0, res;
struct ata_port *ap = link->ap;
int (*check_ready)(struct ata_link *link);
struct domain_device *dev = ap->private_data;
struct sas_internal *i =
to_sas_internal(dev->port->ha->core.shost->transportt);
int res = TMF_RESP_FUNC_FAILED;
int ret = 0;
struct sas_phy *phy = sas_find_local_phy(dev);
struct sas_internal *i = dev_to_sas_internal(dev);
if (i->dft->lldd_I_T_nexus_reset)
res = i->dft->lldd_I_T_nexus_reset(dev);
if (res != TMF_RESP_FUNC_COMPLETE) {
SAS_DPRINTK("%s: Unable to reset I T nexus?\n", __func__);
ret = -EAGAIN;
}
if (res != TMF_RESP_FUNC_COMPLETE)
SAS_DPRINTK("%s: Unable to reset ata device?\n", __func__);
if (scsi_is_sas_phy_local(phy))
check_ready = local_ata_check_ready;
else
check_ready = smp_ata_check_ready;
ret = ata_wait_after_reset(link, deadline, check_ready);
if (ret && ret != -EAGAIN)
ata_link_err(link, "COMRESET failed (errno=%d)\n", ret);
/* XXX: if the class changes during the reset the upper layer
* should be informed, if the device has gone away we assume
* libsas will eventually delete it
*/
switch (dev->sata_dev.command_set) {
case ATA_COMMAND_SET:
SAS_DPRINTK("%s: Found ATA device.\n", __func__);
*class = ATA_DEV_ATA;
break;
case ATAPI_COMMAND_SET:
SAS_DPRINTK("%s: Found ATAPI device.\n", __func__);
*class = ATA_DEV_ATAPI;
break;
default:
SAS_DPRINTK("%s: Unknown SATA command set: %d.\n",
__func__,
dev->sata_dev.command_set);
*class = ATA_DEV_UNKNOWN;
break;
}
ap->cbl = ATA_CBL_SATA;
......@@ -316,8 +361,7 @@ static int sas_ata_soft_reset(struct ata_link *link, unsigned int *class,
{
struct ata_port *ap = link->ap;
struct domain_device *dev = ap->private_data;
struct sas_internal *i =
to_sas_internal(dev->port->ha->core.shost->transportt);
struct sas_internal *i = dev_to_sas_internal(dev);
int res = TMF_RESP_FUNC_FAILED;
int ret = 0;
......@@ -355,8 +399,7 @@ static int sas_ata_soft_reset(struct ata_link *link, unsigned int *class,
*/
static void sas_ata_internal_abort(struct sas_task *task)
{
struct sas_internal *si =
to_sas_internal(task->dev->port->ha->core.shost->transportt);
struct sas_internal *si = dev_to_sas_internal(task->dev);
unsigned long flags;
int res;
......@@ -425,8 +468,7 @@ static void sas_ata_post_internal(struct ata_queued_cmd *qc)
static void sas_ata_set_dmamode(struct ata_port *ap, struct ata_device *ata_dev)
{
struct domain_device *dev = ap->private_data;
struct sas_internal *i =
to_sas_internal(dev->port->ha->core.shost->transportt);
struct sas_internal *i = dev_to_sas_internal(dev);
if (i->dft->lldd_ata_set_dmamode)
i->dft->lldd_ata_set_dmamode(dev);
......
......@@ -125,7 +125,11 @@ static int smp_execute_task(struct domain_device *dev, void *req, int req_size,
task->task_status.stat == SAS_DATA_OVERRUN) {
res = -EMSGSIZE;
break;
} else {
}
if (task->task_status.resp == SAS_TASK_UNDELIVERED &&
task->task_status.stat == SAS_DEVICE_UNKNOWN)
break;
else {
SAS_DPRINTK("%s: task to dev %016llx response: 0x%x "
"status 0x%x\n", __func__,
SAS_ADDR(dev->sas_addr),
......@@ -1648,8 +1652,8 @@ static int sas_get_phy_change_count(struct domain_device *dev,
return res;
}
static int sas_get_phy_attached_sas_addr(struct domain_device *dev,
int phy_id, u8 *attached_sas_addr)
int sas_get_phy_attached_sas_addr(struct domain_device *dev, int phy_id,
u8 *attached_sas_addr)
{
int res;
struct smp_resp *disc_resp;
......
......@@ -89,7 +89,8 @@ int sas_smp_get_phy_events(struct sas_phy *phy);
struct domain_device *sas_find_dev_by_rphy(struct sas_rphy *rphy);
struct domain_device *sas_ex_to_ata(struct domain_device *ex_dev, int phy_id);
int sas_get_phy_attached_sas_addr(struct domain_device *dev, int phy_id,
u8 *attached_sas_addr);
void sas_hae_reset(struct work_struct *work);
void sas_free_device(struct kref *kref);
......
......@@ -615,6 +615,7 @@ struct sas_domain_function_template {
int (*lldd_clear_task_set)(struct domain_device *, u8 *lun);
int (*lldd_I_T_nexus_reset)(struct domain_device *);
int (*lldd_ata_soft_reset)(struct domain_device *);
int (*lldd_ata_check_ready)(struct domain_device *);
void (*lldd_ata_set_dmamode)(struct domain_device *);
int (*lldd_lu_reset)(struct domain_device *, u8 *lun);
int (*lldd_query_task)(struct sas_task *);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment