Commit 36d96827 authored by Quan Nguyen's avatar Quan Nguyen Committed by Joel Stanley

ARM: dts: aspeed: Add device tree for Ampere's Mt. Mitchell BMC

The Mt. Mitchell BMC is an ASPEED AST2600-based BMC for the Mt. Mitchell
hardware reference platform with AmpereOne(TM) processor.
Signed-off-by: default avatarQuan Nguyen <quan@os.amperecomputing.com>
Signed-off-by: default avatarPhong Vo <phong@os.amperecomputing.com>
Signed-off-by: default avatarThang Q. Nguyen <thang@os.amperecomputing.com>
Reviewed-by: default avatarJoel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20220817071539.176110-3-quan@os.amperecomputing.comSigned-off-by: default avatarJoel Stanley <joel@jms.id.au>
parent 93eaac48
......@@ -1576,6 +1576,7 @@ dtb-$(CONFIG_ARCH_ASPEED) += \
aspeed-ast2600-evb.dtb \
aspeed-bmc-amd-ethanolx.dtb \
aspeed-bmc-ampere-mtjade.dtb \
aspeed-bmc-ampere-mtmitchell.dtb \
aspeed-bmc-arm-stardragon4800-rep2.dtb \
aspeed-bmc-asrock-e3c246d4i.dtb \
aspeed-bmc-asrock-romed8hm3.dtb \
......
// SPDX-License-Identifier: GPL-2.0-only
// Copyright (c) 2022, Ampere Computing LLC
/dts-v1/;
#include "aspeed-g6.dtsi"
#include <dt-bindings/gpio/aspeed-gpio.h>
/ {
model = "Ampere Mt.Mitchell BMC";
compatible = "ampere,mtmitchell-bmc", "aspeed,ast2600";
chosen {
stdout-path = &uart5;
};
memory@80000000 {
device_type = "memory";
reg = <0x80000000 0x80000000>;
};
reserved-memory {
#address-cells = <1>;
#size-cells = <1>;
ranges;
gfx_memory: framebuffer {
size = <0x01000000>;
alignment = <0x01000000>;
compatible = "shared-dma-pool";
reusable;
};
video_engine_memory: video {
size = <0x04000000>;
alignment = <0x01000000>;
compatible = "shared-dma-pool";
reusable;
};
vga_memory: region@bf000000 {
no-map;
compatible = "shared-dma-pool";
reg = <0xbf000000 0x01000000>; /* 16M */
};
};
voltage_mon_reg: voltage-mon-regulator {
compatible = "regulator-fixed";
regulator-name = "ltc2497_reg";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
gpioI5mux: mux-controller {
compatible = "gpio-mux";
#mux-control-cells = <0>;
mux-gpios = <&gpio0 ASPEED_GPIO(I, 5) GPIO_ACTIVE_HIGH>;
};
adc0mux: adc0mux {
compatible = "io-channel-mux";
io-channels = <&adc0 0>;
#io-channel-cells = <1>;
io-channel-names = "parent";
mux-controls = <&gpioI5mux>;
channels = "s0", "s1";
};
adc1mux: adc1mux {
compatible = "io-channel-mux";
io-channels = <&adc0 1>;
#io-channel-cells = <1>;
io-channel-names = "parent";
mux-controls = <&gpioI5mux>;
channels = "s0", "s1";
};
adc2mux: adc2mux {
compatible = "io-channel-mux";
io-channels = <&adc0 2>;
#io-channel-cells = <1>;
io-channel-names = "parent";
mux-controls = <&gpioI5mux>;
channels = "s0", "s1";
};
adc3mux: adc3mux {
compatible = "io-channel-mux";
io-channels = <&adc0 3>;
#io-channel-cells = <1>;
io-channel-names = "parent";
mux-controls = <&gpioI5mux>;
channels = "s0", "s1";
};
adc4mux: adc4mux {
compatible = "io-channel-mux";
io-channels = <&adc0 4>;
#io-channel-cells = <1>;
io-channel-names = "parent";
mux-controls = <&gpioI5mux>;
channels = "s0", "s1";
};
adc5mux: adc5mux {
compatible = "io-channel-mux";
io-channels = <&adc0 5>;
#io-channel-cells = <1>;
io-channel-names = "parent";
mux-controls = <&gpioI5mux>;
channels = "s0", "s1";
};
adc6mux: adc6mux {
compatible = "io-channel-mux";
io-channels = <&adc0 6>;
#io-channel-cells = <1>;
io-channel-names = "parent";
mux-controls = <&gpioI5mux>;
channels = "s0", "s1";
};
adc7mux: adc7mux {
compatible = "io-channel-mux";
io-channels = <&adc0 7>;
#io-channel-cells = <1>;
io-channel-names = "parent";
mux-controls = <&gpioI5mux>;
channels = "s0", "s1";
};
adc8mux: adc8mux {
compatible = "io-channel-mux";
io-channels = <&adc1 0>;
#io-channel-cells = <1>;
io-channel-names = "parent";
mux-controls = <&gpioI5mux>;
channels = "s0", "s1";
};
adc9mux: adc9mux {
compatible = "io-channel-mux";
io-channels = <&adc1 1>;
#io-channel-cells = <1>;
io-channel-names = "parent";
mux-controls = <&gpioI5mux>;
channels = "s0", "s1";
};
adc10mux: adc10mux {
compatible = "io-channel-mux";
io-channels = <&adc1 2>;
#io-channel-cells = <1>;
io-channel-names = "parent";
mux-controls = <&gpioI5mux>;
channels = "s0", "s1";
};
adc11mux: adc11mux {
compatible = "io-channel-mux";
io-channels = <&adc1 3>;
#io-channel-cells = <1>;
io-channel-names = "parent";
mux-controls = <&gpioI5mux>;
channels = "s0", "s1";
};
adc12mux: adc12mux {
compatible = "io-channel-mux";
io-channels = <&adc1 4>;
#io-channel-cells = <1>;
io-channel-names = "parent";
mux-controls = <&gpioI5mux>;
channels = "s0", "s1";
};
adc13mux: adc13mux {
compatible = "io-channel-mux";
io-channels = <&adc1 5>;
#io-channel-cells = <1>;
io-channel-names = "parent";
mux-controls = <&gpioI5mux>;
channels = "s0", "s1";
};
adc14mux: adc14mux {
compatible = "io-channel-mux";
io-channels = <&adc1 6>;
#io-channel-cells = <1>;
io-channel-names = "parent";
mux-controls = <&gpioI5mux>;
channels = "s0", "s1";
};
adc15mux: adc15mux {
compatible = "io-channel-mux";
io-channels = <&adc1 7>;
#io-channel-cells = <1>;
io-channel-names = "parent";
mux-controls = <&gpioI5mux>;
channels = "s0", "s1";
};
iio-hwmon {
compatible = "iio-hwmon";
io-channels = <&adc0mux 0>, <&adc0mux 1>,
<&adc1mux 0>, <&adc1mux 1>,
<&adc2mux 0>, <&adc2mux 1>,
<&adc3mux 0>, <&adc3mux 1>,
<&adc4mux 0>, <&adc4mux 1>,
<&adc5mux 0>, <&adc5mux 1>,
<&adc6mux 0>, <&adc6mux 1>,
<&adc7mux 0>, <&adc7mux 1>,
<&adc8mux 0>, <&adc8mux 1>,
<&adc9mux 0>, <&adc9mux 1>,
<&adc10mux 0>, <&adc10mux 1>,
<&adc11mux 0>, <&adc11mux 1>,
<&adc12mux 0>, <&adc12mux 1>,
<&adc13mux 0>, <&adc13mux 1>,
<&adc14mux 0>, <&adc14mux 1>,
<&adc15mux 0>, <&adc15mux 1>,
<&adc_i2c 0>, <&adc_i2c 1>,
<&adc_i2c 2>, <&adc_i2c 3>,
<&adc_i2c 4>, <&adc_i2c 5>,
<&adc_i2c 6>, <&adc_i2c 7>,
<&adc_i2c 8>, <&adc_i2c 9>,
<&adc_i2c 10>, <&adc_i2c 11>,
<&adc_i2c 12>, <&adc_i2c 13>,
<&adc_i2c 14>, <&adc_i2c 15>;
};
};
&mdio0 {
status = "okay";
ethphy0: ethernet-phy@0 {
compatible = "ethernet-phy-ieee802.3-c22";
reg = <0>;
};
};
&mac0 {
status = "okay";
phy-mode = "rgmii";
phy-handle = <&ethphy0>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_rgmii1_default>;
};
&fmc {
status = "okay";
flash@0 {
status = "okay";
m25p,fast-read;
label = "bmc";
spi-max-frequency = <50000000>;
#include "openbmc-flash-layout-64.dtsi"
};
flash@1 {
status = "okay";
m25p,fast-read;
label = "alt-bmc";
spi-max-frequency = <50000000>;
#include "openbmc-flash-layout-64-alt.dtsi"
};
};
&spi1 {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_spi1_default>;
flash@0 {
status = "okay";
m25p,fast-read;
label = "pnor";
spi-max-frequency = <20000000>;
};
};
&uart1 {
status = "okay";
};
&uart2 {
status = "okay";
};
&uart3 {
status = "okay";
};
&uart4 {
status = "okay";
};
&i2c0 {
status = "okay";
temperature-sensor@2e {
compatible = "adi,adt7490";
reg = <0x2e>;
};
};
&i2c1 {
status = "okay";
};
&i2c2 {
status = "okay";
psu@58 {
compatible = "pmbus";
reg = <0x58>;
};
psu@59 {
compatible = "pmbus";
reg = <0x59>;
};
};
&i2c3 {
status = "okay";
};
&i2c4 {
status = "okay";
adc_i2c: adc@16 {
compatible = "lltc,ltc2497";
reg = <0x16>;
vref-supply = <&voltage_mon_reg>;
#io-channel-cells = <1>;
};
eeprom@50 {
compatible = "atmel,24c64";
reg = <0x50>;
pagesize = <32>;
};
i2c-mux@70 {
compatible = "nxp,pca9545";
#address-cells = <1>;
#size-cells = <0>;
reg = <0x70>;
i2c-mux-idle-disconnect;
i2c4_bus70_chn0: i2c@0 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0x0>;
outlet_temp1: temperature-sensor@48 {
compatible = "ti,tmp75";
reg = <0x48>;
};
psu1_inlet_temp2: temperature-sensor@49 {
compatible = "ti,tmp75";
reg = <0x49>;
};
};
i2c4_bus70_chn1: i2c@1 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0x1>;
pcie_zone_temp1: temperature-sensor@48 {
compatible = "ti,tmp75";
reg = <0x48>;
};
psu0_inlet_temp2: temperature-sensor@49 {
compatible = "ti,tmp75";
reg = <0x49>;
};
};
i2c4_bus70_chn2: i2c@2 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0x2>;
pcie_zone_temp2: temperature-sensor@48 {
compatible = "ti,tmp75";
reg = <0x48>;
};
outlet_temp2: temperature-sensor@49 {
compatible = "ti,tmp75";
reg = <0x49>;
};
};
i2c4_bus70_chn3: i2c@3 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0x3>;
mb_inlet_temp1: temperature-sensor@7c {
compatible = "microchip,emc1413";
reg = <0x7c>;
};
mb_inlet_temp2: temperature-sensor@4c {
compatible = "microchip,emc1413";
reg = <0x4c>;
};
};
};
};
&i2c5 {
status = "okay";
i2c-mux@70 {
compatible = "nxp,pca9548";
#address-cells = <1>;
#size-cells = <0>;
reg = <0x70>;
i2c-mux-idle-disconnect;
};
};
&i2c6 {
status = "okay";
rtc@51 {
compatible = "nxp,pcf85063a";
reg = <0x51>;
};
};
&i2c7 {
status = "okay";
};
&i2c9 {
status = "okay";
};
&i2c11 {
status = "okay";
};
&i2c14 {
status = "okay";
eeprom@50 {
compatible = "atmel,24c64";
reg = <0x50>;
pagesize = <32>;
};
bmc_ast2600_cpu: temperature-sensor@35 {
compatible = "ti,tmp175";
reg = <0x35>;
};
};
&adc0 {
ref_voltage = <2500>;
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_adc0_default &pinctrl_adc1_default
&pinctrl_adc2_default &pinctrl_adc3_default
&pinctrl_adc4_default &pinctrl_adc5_default
&pinctrl_adc6_default &pinctrl_adc7_default>;
};
&adc1 {
ref_voltage = <2500>;
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_adc8_default &pinctrl_adc9_default
&pinctrl_adc10_default &pinctrl_adc11_default
&pinctrl_adc12_default &pinctrl_adc13_default
&pinctrl_adc14_default &pinctrl_adc15_default>;
};
&vhub {
status = "okay";
};
&video {
status = "okay";
memory-region = <&video_engine_memory>;
};
&gpio0 {
gpio-line-names =
/*A0-A7*/ "","","","","","i2c2-reset-n","i2c6-reset-n","i2c4-reset-n",
/*B0-B7*/ "","","","","host0-sysreset-n","host0-pmin-n","","",
/*C0-C7*/ "s0-vrd-fault-n","s1-vrd-fault-n","","",
"irq-n","","vrd-sel","spd-sel",
/*D0-D7*/ "presence-ps0","presence-ps1","hsc-12vmain-alt2-n","ext-high-temp-n",
"","bmc-ncsi-txen","","",
/*E0-E7*/ "","","clk50m-bmc-ncsi","","","","","",
/*F0-F7*/ "s0-pcp-oc-warn-n","s1-pcp-oc-warn-n","power-chassis-control",
"cpu-bios-recover","s0-heartbeat","hs-csout-prochot",
"s0-vr-hot-n","s1-vr-hot-n",
/*G0-G7*/ "","","hsc-12vmain-alt1-n","","","","","",
/*H0-H7*/ "","","wd-disable-n","power-chassis-good","","","","",
/*I0-I7*/ "","","","","","adc-sw","power-button","rtc-battery-voltage-read-enable",
/*J0-J7*/ "","","","","","","","",
/*K0-K7*/ "","","","","","","","",
/*L0-L7*/ "","","","","","","","",
/*M0-M7*/ "","s0-ddr-save","soc-spi-nor-access","presence-cpu0",
"s0-rtc-lock","","","",
/*N0-N7*/ "hpm-fw-recovery","hpm-stby-rst-n","jtag-sel-s0","led-sw-hb",
"jtag-dbgr-prsnt-n","s1-heartbeat","","",
/*O0-O7*/ "","","","","","","","",
/*P0-P7*/ "ps0-ac-loss-n","ps1-ac-loss-n","","",
"led-fault","cpld-user-mode","jtag-srst-n","led-bmc-hb",
/*Q0-Q7*/ "","","","","","","","",
/*R0-R7*/ "","","","","","","","",
/*S0-S7*/ "","","identify-button","led-identify",
"s1-ddr-save","spi-nor-access","sys-pgood","presence-cpu1",
/*T0-T7*/ "","","","","","","","",
/*U0-U7*/ "","","","","","","","",
/*V0-V7*/ "s0-hightemp-n","s0-fault-alert","s0-sys-auth-failure-n",
"host0-reboot-ack-n","host0-ready","host0-shd-req-n",
"host0-shd-ack-n","s0-overtemp-n",
/*W0-W7*/ "ocp-aux-pwren","ocp-main-pwren","ocp-pgood","",
"bmc-ok","bmc-ready","spi0-program-sel","spi0-backup-sel",
/*X0-X7*/ "i2c-backup-sel","s1-fault-alert","s1-fw-boot-ok",
"s1-hightemp-n","s0-spi-auth-fail-n","s1-sys-auth-failure-n",
"s1-overtemp-n","s1-spi-auth-fail-n",
/*Y0-Y7*/ "","","","","","","","host0-special-boot",
/*Z0-Z7*/ "reset-button","ps0-pgood","ps1-pgood","","","","","";
};
&gpio1 {
gpio-line-names =
/*18A0-18A7*/ "","","","","","","","",
/*18B0-18B7*/ "","","","","","","s0-soc-pgood","",
/*18C0-18C7*/ "uart1-mode0","uart1-mode1","uart2-mode0","uart2-mode1",
"uart3-mode0","uart3-mode1","uart4-mode0","uart4-mode1",
/*18D0-18D7*/ "","","","","","","","",
/*18E0-18E3*/ "","","","";
};
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment