Commit 37744fee authored by Arnd Bergmann's avatar Arnd Bergmann Committed by Rich Felker

sh: remove sh5 support

sh5 never became a product and has probably never really worked.

Remove it by recursively deleting all associated Kconfig options
and all corresponding files.
Reviewed-by: default avatarGeert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: default avatarArnd Bergmann <arnd@arndb.de>
Signed-off-by: default avatarRich Felker <dalias@libc.org>
parent d1f56f31
...@@ -54,15 +54,6 @@ config SUPERH ...@@ -54,15 +54,6 @@ config SUPERH
select HAVE_NMI select HAVE_NMI
select NEED_SG_DMA_LENGTH select NEED_SG_DMA_LENGTH
select ARCH_HAS_GIGANTIC_PAGE select ARCH_HAS_GIGANTIC_PAGE
help
The SuperH is a RISC processor targeted for use in embedded systems
and consumer electronics; it was also used in the Sega Dreamcast
gaming console. The SuperH port has a home page at
<http://www.linux-sh.org/>.
config SUPERH32
def_bool "$(ARCH)" = "sh"
select ARCH_32BIT_OFF_T select ARCH_32BIT_OFF_T
select GUP_GET_PTE_LOW_HIGH if X2TLB select GUP_GET_PTE_LOW_HIGH if X2TLB
select HAVE_KPROBES select HAVE_KPROBES
...@@ -81,19 +72,15 @@ config SUPERH32 ...@@ -81,19 +72,15 @@ config SUPERH32
select ARCH_HIBERNATION_POSSIBLE if MMU select ARCH_HIBERNATION_POSSIBLE if MMU
select SPARSE_IRQ select SPARSE_IRQ
select HAVE_STACKPROTECTOR select HAVE_STACKPROTECTOR
help
config SUPERH64 The SuperH is a RISC processor targeted for use in embedded systems
def_bool "$(ARCH)" = "sh64" and consumer electronics; it was also used in the Sega Dreamcast
select HAVE_EXIT_THREAD gaming console. The SuperH port has a home page at
select KALLSYMS <http://www.linux-sh.org/>.
config GENERIC_BUG config GENERIC_BUG
def_bool y def_bool y
depends on BUG && SUPERH32 depends on BUG
config GENERIC_CSUM
def_bool y
depends on SUPERH64
config GENERIC_HWEIGHT config GENERIC_HWEIGHT
def_bool y def_bool y
...@@ -203,12 +190,6 @@ config CPU_SH4AL_DSP ...@@ -203,12 +190,6 @@ config CPU_SH4AL_DSP
select CPU_SH4A select CPU_SH4A
select CPU_HAS_DSP select CPU_HAS_DSP
config CPU_SH5
bool
select CPU_HAS_FPU
select SYS_SUPPORTS_SH_TMU
select SYS_SUPPORTS_HUGETLBFS if MMU
config CPU_SHX2 config CPU_SHX2
bool bool
...@@ -228,8 +209,6 @@ config CPU_HAS_PMU ...@@ -228,8 +209,6 @@ config CPU_HAS_PMU
default y default y
bool bool
if SUPERH32
choice choice
prompt "Processor sub-type selection" prompt "Processor sub-type selection"
...@@ -518,27 +497,6 @@ config CPU_SUBTYPE_SH7366 ...@@ -518,27 +497,6 @@ config CPU_SUBTYPE_SH7366
endchoice endchoice
endif
if SUPERH64
choice
prompt "Processor sub-type selection"
# SH-5 Processor Support
config CPU_SUBTYPE_SH5_101
bool "Support SH5-101 processor"
select CPU_SH5
config CPU_SUBTYPE_SH5_103
bool "Support SH5-103 processor"
select CPU_SH5
endchoice
endif
source "arch/sh/mm/Kconfig" source "arch/sh/mm/Kconfig"
source "arch/sh/Kconfig.cpu" source "arch/sh/Kconfig.cpu"
...@@ -592,7 +550,7 @@ source "kernel/Kconfig.hz" ...@@ -592,7 +550,7 @@ source "kernel/Kconfig.hz"
config KEXEC config KEXEC
bool "kexec system call (EXPERIMENTAL)" bool "kexec system call (EXPERIMENTAL)"
depends on SUPERH32 && MMU depends on MMU
select KEXEC_CORE select KEXEC_CORE
help help
kexec is a system call that implements the ability to shutdown your kexec is a system call that implements the ability to shutdown your
...@@ -610,7 +568,7 @@ config KEXEC ...@@ -610,7 +568,7 @@ config KEXEC
config CRASH_DUMP config CRASH_DUMP
bool "kernel crash dumps (EXPERIMENTAL)" bool "kernel crash dumps (EXPERIMENTAL)"
depends on SUPERH32 && BROKEN_ON_SMP depends on BROKEN_ON_SMP
help help
Generate crash dump after being started by kexec. Generate crash dump after being started by kexec.
This should be normally only set in special crash dump kernels This should be normally only set in special crash dump kernels
...@@ -624,7 +582,7 @@ config CRASH_DUMP ...@@ -624,7 +582,7 @@ config CRASH_DUMP
config KEXEC_JUMP config KEXEC_JUMP
bool "kexec jump (EXPERIMENTAL)" bool "kexec jump (EXPERIMENTAL)"
depends on SUPERH32 && KEXEC && HIBERNATION depends on KEXEC && HIBERNATION
help help
Jump between original kernel and kexeced kernel and invoke Jump between original kernel and kexeced kernel and invoke
code via KEXEC code via KEXEC
...@@ -701,7 +659,7 @@ config HOTPLUG_CPU ...@@ -701,7 +659,7 @@ config HOTPLUG_CPU
config GUSA config GUSA
def_bool y def_bool y
depends on !SMP && SUPERH32 depends on !SMP
help help
This enables support for gUSA (general UserSpace Atomicity). This enables support for gUSA (general UserSpace Atomicity).
This is the default implementation for both UP and non-ll/sc This is the default implementation for both UP and non-ll/sc
......
...@@ -13,7 +13,6 @@ config CPU_LITTLE_ENDIAN ...@@ -13,7 +13,6 @@ config CPU_LITTLE_ENDIAN
config CPU_BIG_ENDIAN config CPU_BIG_ENDIAN
bool "Big Endian" bool "Big Endian"
depends on !CPU_SH5
endchoice endchoice
...@@ -27,10 +26,6 @@ config SH_FPU ...@@ -27,10 +26,6 @@ config SH_FPU
This option must be set in order to enable the FPU. This option must be set in order to enable the FPU.
config SH64_FPU_DENORM_FLUSH
bool "Flush floating point denorms to zero"
depends on SH_FPU && SUPERH64
config SH_FPU_EMU config SH_FPU_EMU
def_bool n def_bool n
prompt "FPU emulation support" prompt "FPU emulation support"
...@@ -77,10 +72,6 @@ config SPECULATIVE_EXECUTION ...@@ -77,10 +72,6 @@ config SPECULATIVE_EXECUTION
If unsure, say N. If unsure, say N.
config SH64_ID2815_WORKAROUND
bool "Include workaround for SH5-101 cut2 silicon defect ID2815"
depends on CPU_SUBTYPE_SH5_101
config CPU_HAS_INTEVT config CPU_HAS_INTEVT
bool bool
......
...@@ -5,7 +5,6 @@ config TRACE_IRQFLAGS_SUPPORT ...@@ -5,7 +5,6 @@ config TRACE_IRQFLAGS_SUPPORT
config SH_STANDARD_BIOS config SH_STANDARD_BIOS
bool "Use LinuxSH standard BIOS" bool "Use LinuxSH standard BIOS"
depends on SUPERH32
help help
Say Y here if your target has the gdb-sh-stub Say Y here if your target has the gdb-sh-stub
package from www.m17n.org (or any conforming standard LinuxSH BIOS) package from www.m17n.org (or any conforming standard LinuxSH BIOS)
...@@ -19,7 +18,7 @@ config SH_STANDARD_BIOS ...@@ -19,7 +18,7 @@ config SH_STANDARD_BIOS
config STACK_DEBUG config STACK_DEBUG
bool "Check for stack overflows" bool "Check for stack overflows"
depends on DEBUG_KERNEL && SUPERH32 depends on DEBUG_KERNEL
help help
This option will cause messages to be printed if free stack space This option will cause messages to be printed if free stack space
drops below a certain limit. Saying Y here will add overhead to drops below a certain limit. Saying Y here will add overhead to
...@@ -38,7 +37,7 @@ config 4KSTACKS ...@@ -38,7 +37,7 @@ config 4KSTACKS
config IRQSTACKS config IRQSTACKS
bool "Use separate kernel stacks when processing interrupts" bool "Use separate kernel stacks when processing interrupts"
depends on DEBUG_KERNEL && SUPERH32 && BROKEN depends on DEBUG_KERNEL && BROKEN
help help
If you say Y here the kernel will use separate kernel stacks If you say Y here the kernel will use separate kernel stacks
for handling hard and soft interrupts. This can help avoid for handling hard and soft interrupts. This can help avoid
...@@ -46,7 +45,7 @@ config IRQSTACKS ...@@ -46,7 +45,7 @@ config IRQSTACKS
config DUMP_CODE config DUMP_CODE
bool "Show disassembly of nearby code in register dumps" bool "Show disassembly of nearby code in register dumps"
depends on DEBUG_KERNEL && SUPERH32 depends on DEBUG_KERNEL
default y if DEBUG_BUGVERBOSE default y if DEBUG_BUGVERBOSE
default n default n
help help
...@@ -59,7 +58,6 @@ config DUMP_CODE ...@@ -59,7 +58,6 @@ config DUMP_CODE
config DWARF_UNWINDER config DWARF_UNWINDER
bool "Enable the DWARF unwinder for stacktraces" bool "Enable the DWARF unwinder for stacktraces"
select FRAME_POINTER select FRAME_POINTER
depends on SUPERH32
default n default n
help help
Enabling this option will make stacktraces more accurate, at Enabling this option will make stacktraces more accurate, at
...@@ -77,11 +75,6 @@ config SH_NO_BSS_INIT ...@@ -77,11 +75,6 @@ config SH_NO_BSS_INIT
For all other cases, say N. If this option seems perplexing, or For all other cases, say N. If this option seems perplexing, or
you aren't sure, say N. you aren't sure, say N.
config SH64_SR_WATCH
bool "Debug: set SR.WATCH to enable hardware watchpoints and trace"
depends on SUPERH64
config MCOUNT config MCOUNT
def_bool y def_bool y
depends on SUPERH32
depends on STACK_DEBUG || FUNCTION_TRACER depends on STACK_DEBUG || FUNCTION_TRACER
...@@ -11,7 +11,7 @@ ...@@ -11,7 +11,7 @@
# #
ifneq ($(SUBARCH),$(ARCH)) ifneq ($(SUBARCH),$(ARCH))
ifeq ($(CROSS_COMPILE),) ifeq ($(CROSS_COMPILE),)
CROSS_COMPILE := $(call cc-cross-prefix, $(UTS_MACHINE)-linux- $(UTS_MACHINE)-linux-gnu- $(UTS_MACHINE)-unknown-linux-gnu-) CROSS_COMPILE := $(call cc-cross-prefix, sh-linux- sh-linux-gnu- sh-unknown-linux-gnu-)
endif endif
endif endif
...@@ -29,12 +29,9 @@ isa-$(CONFIG_CPU_SH3) := sh3 ...@@ -29,12 +29,9 @@ isa-$(CONFIG_CPU_SH3) := sh3
isa-$(CONFIG_CPU_SH4) := sh4 isa-$(CONFIG_CPU_SH4) := sh4
isa-$(CONFIG_CPU_SH4A) := sh4a isa-$(CONFIG_CPU_SH4A) := sh4a
isa-$(CONFIG_CPU_SH4AL_DSP) := sh4al isa-$(CONFIG_CPU_SH4AL_DSP) := sh4al
isa-$(CONFIG_CPU_SH5) := shmedia
ifeq ($(CONFIG_SUPERH32),y)
isa-$(CONFIG_SH_DSP) := $(isa-y)-dsp isa-$(CONFIG_SH_DSP) := $(isa-y)-dsp
isa-y := $(isa-y)-up isa-y := $(isa-y)-up
endif
cflags-$(CONFIG_CPU_SH2) := $(call cc-option,-m2,) cflags-$(CONFIG_CPU_SH2) := $(call cc-option,-m2,)
cflags-$(CONFIG_CPU_J2) += $(call cc-option,-mj2,) cflags-$(CONFIG_CPU_J2) += $(call cc-option,-mj2,)
...@@ -47,7 +44,6 @@ cflags-$(CONFIG_CPU_SH4) := $(call cc-option,-m4,) \ ...@@ -47,7 +44,6 @@ cflags-$(CONFIG_CPU_SH4) := $(call cc-option,-m4,) \
cflags-$(CONFIG_CPU_SH4A) += $(call cc-option,-m4a,) \ cflags-$(CONFIG_CPU_SH4A) += $(call cc-option,-m4a,) \
$(call cc-option,-m4a-nofpu,) $(call cc-option,-m4a-nofpu,)
cflags-$(CONFIG_CPU_SH4AL_DSP) += $(call cc-option,-m4al,) cflags-$(CONFIG_CPU_SH4AL_DSP) += $(call cc-option,-m4al,)
cflags-$(CONFIG_CPU_SH5) := $(call cc-option,-m5-32media-nofpu,)
ifeq ($(cflags-y),) ifeq ($(cflags-y),)
# #
...@@ -88,7 +84,7 @@ OBJCOPYFLAGS := -O binary -R .note -R .note.gnu.build-id -R .comment \ ...@@ -88,7 +84,7 @@ OBJCOPYFLAGS := -O binary -R .note -R .note.gnu.build-id -R .comment \
-R .stab -R .stabstr -S -R .stab -R .stabstr -S
# Give the various platforms the opportunity to set default image types # Give the various platforms the opportunity to set default image types
defaultimage-$(CONFIG_SUPERH32) := zImage defaultimage-y := zImage
defaultimage-$(CONFIG_SH_SH7785LCR) := uImage defaultimage-$(CONFIG_SH_SH7785LCR) := uImage
defaultimage-$(CONFIG_SH_RSK) := uImage defaultimage-$(CONFIG_SH_RSK) := uImage
defaultimage-$(CONFIG_SH_URQUELL) := uImage defaultimage-$(CONFIG_SH_URQUELL) := uImage
...@@ -107,31 +103,22 @@ KBUILD_IMAGE := $(boot)/$(defaultimage-y) ...@@ -107,31 +103,22 @@ KBUILD_IMAGE := $(boot)/$(defaultimage-y)
# Choosing incompatible machines durings configuration will result in # Choosing incompatible machines durings configuration will result in
# error messages during linking. # error messages during linking.
# #
ifdef CONFIG_SUPERH32
UTS_MACHINE := sh UTS_MACHINE := sh
BITS := 32
LDFLAGS_vmlinux += -e _stext LDFLAGS_vmlinux += -e _stext
else
UTS_MACHINE := sh64
BITS := 64
LDFLAGS_vmlinux += --defsym phys_stext=_stext-$(CONFIG_PAGE_OFFSET) \
--defsym phys_stext_shmedia=phys_stext+1 \
-e phys_stext_shmedia
endif
ifdef CONFIG_CPU_LITTLE_ENDIAN ifdef CONFIG_CPU_LITTLE_ENDIAN
ld-bfd := elf32-$(UTS_MACHINE)-linux ld-bfd := elf32-sh-linux
LDFLAGS_vmlinux += --defsym jiffies=jiffies_64 --oformat $(ld-bfd) LDFLAGS_vmlinux += --defsym jiffies=jiffies_64 --oformat $(ld-bfd)
KBUILD_LDFLAGS += -EL KBUILD_LDFLAGS += -EL
else else
ld-bfd := elf32-$(UTS_MACHINE)big-linux ld-bfd := elf32-shbig-linux
LDFLAGS_vmlinux += --defsym jiffies=jiffies_64+4 --oformat $(ld-bfd) LDFLAGS_vmlinux += --defsym jiffies=jiffies_64+4 --oformat $(ld-bfd)
KBUILD_LDFLAGS += -EB KBUILD_LDFLAGS += -EB
endif endif
export ld-bfd BITS export ld-bfd
head-y := arch/sh/kernel/head_$(BITS).o head-y := arch/sh/kernel/head_32.o
core-y += arch/sh/kernel/ arch/sh/mm/ arch/sh/boards/ core-y += arch/sh/kernel/ arch/sh/mm/ arch/sh/boards/
core-$(CONFIG_SH_FPU_EMU) += arch/sh/math-emu/ core-$(CONFIG_SH_FPU_EMU) += arch/sh/math-emu/
...@@ -185,7 +172,6 @@ cpuincdir-$(CONFIG_CPU_SH2) += cpu-sh2 ...@@ -185,7 +172,6 @@ cpuincdir-$(CONFIG_CPU_SH2) += cpu-sh2
cpuincdir-$(CONFIG_CPU_SH3) += cpu-sh3 cpuincdir-$(CONFIG_CPU_SH3) += cpu-sh3
cpuincdir-$(CONFIG_CPU_SH4A) += cpu-sh4a cpuincdir-$(CONFIG_CPU_SH4A) += cpu-sh4a
cpuincdir-$(CONFIG_CPU_SH4) += cpu-sh4 cpuincdir-$(CONFIG_CPU_SH4) += cpu-sh4
cpuincdir-$(CONFIG_CPU_SH5) += cpu-sh5
cpuincdir-y += cpu-common # Must be last cpuincdir-y += cpu-common # Must be last
drivers-y += arch/sh/drivers/ drivers-y += arch/sh/drivers/
...@@ -206,8 +192,7 @@ ifeq ($(CONFIG_DWARF_UNWINDER),y) ...@@ -206,8 +192,7 @@ ifeq ($(CONFIG_DWARF_UNWINDER),y)
KBUILD_CFLAGS += -fasynchronous-unwind-tables KBUILD_CFLAGS += -fasynchronous-unwind-tables
endif endif
libs-$(CONFIG_SUPERH32) := arch/sh/lib/ $(libs-y) libs-y := arch/sh/lib/ $(libs-y)
libs-$(CONFIG_SUPERH64) := arch/sh/lib64/ $(libs-y)
BOOT_TARGETS = uImage uImage.bz2 uImage.gz uImage.lzma uImage.xz uImage.lzo \ BOOT_TARGETS = uImage uImage.bz2 uImage.gz uImage.lzma uImage.xz uImage.lzo \
uImage.srec uImage.bin zImage vmlinux.bin vmlinux.srec \ uImage.srec uImage.bin zImage vmlinux.bin vmlinux.srec \
......
...@@ -8,9 +8,9 @@ ...@@ -8,9 +8,9 @@
targets := vmlinux vmlinux.bin vmlinux.bin.gz \ targets := vmlinux vmlinux.bin vmlinux.bin.gz \
vmlinux.bin.bz2 vmlinux.bin.lzma \ vmlinux.bin.bz2 vmlinux.bin.lzma \
vmlinux.bin.xz vmlinux.bin.lzo \ vmlinux.bin.xz vmlinux.bin.lzo \
head_$(BITS).o misc.o piggy.o head_32.o misc.o piggy.o
OBJECTS = $(obj)/head_$(BITS).o $(obj)/misc.o $(obj)/cache.o OBJECTS = $(obj)/head_32.o $(obj)/misc.o $(obj)/cache.o
GCOV_PROFILE := n GCOV_PROFILE := n
...@@ -39,15 +39,11 @@ LDFLAGS_vmlinux := --oformat $(ld-bfd) -Ttext $(IMAGE_OFFSET) -e startup \ ...@@ -39,15 +39,11 @@ LDFLAGS_vmlinux := --oformat $(ld-bfd) -Ttext $(IMAGE_OFFSET) -e startup \
# #
# Pull in the necessary libgcc bits from the in-kernel implementation. # Pull in the necessary libgcc bits from the in-kernel implementation.
# #
lib1funcs-$(CONFIG_SUPERH32) := ashiftrt.S ashldi3.c ashrsi3.S ashlsi3.S \ lib1funcs-y := ashiftrt.S ashldi3.c ashrsi3.S ashlsi3.S lshrsi3.S
lshrsi3.S
lib1funcs-obj := \ lib1funcs-obj := \
$(addsuffix .o, $(basename $(addprefix $(obj)/, $(lib1funcs-y)))) $(addsuffix .o, $(basename $(addprefix $(obj)/, $(lib1funcs-y))))
lib1funcs-dir := $(srctree)/arch/$(SRCARCH)/lib lib1funcs-dir := $(srctree)/arch/$(SRCARCH)/lib
ifeq ($(BITS),64)
lib1funcs-dir := $(addsuffix $(BITS), $(lib1funcs-dir))
endif
KBUILD_CFLAGS += -I$(lib1funcs-dir) -DDISABLE_BRANCH_PROFILING KBUILD_CFLAGS += -I$(lib1funcs-dir) -DDISABLE_BRANCH_PROFILING
......
...@@ -116,11 +116,7 @@ void ftrace_stub(void) ...@@ -116,11 +116,7 @@ void ftrace_stub(void)
{ {
} }
#ifdef CONFIG_SUPERH64
#define stackalign 8
#else
#define stackalign 4 #define stackalign 4
#endif
#define STACK_SIZE (4096) #define STACK_SIZE (4096)
long __attribute__ ((aligned(stackalign))) user_stack[STACK_SIZE]; long __attribute__ ((aligned(stackalign))) user_stack[STACK_SIZE];
...@@ -130,13 +126,9 @@ void decompress_kernel(void) ...@@ -130,13 +126,9 @@ void decompress_kernel(void)
{ {
unsigned long output_addr; unsigned long output_addr;
#ifdef CONFIG_SUPERH64
output_addr = (CONFIG_MEMORY_START + 0x2000);
#else
output_addr = __pa((unsigned long)&_text+PAGE_SIZE); output_addr = __pa((unsigned long)&_text+PAGE_SIZE);
#if defined(CONFIG_29BIT) #if defined(CONFIG_29BIT)
output_addr |= P2SEG; output_addr |= P2SEG;
#endif
#endif #endif
output = (unsigned char *)output_addr; output = (unsigned char *)output_addr;
......
...@@ -10,7 +10,6 @@ obj-$(CONFIG_CPU_SUBTYPE_SH7763) += pci-sh7780.o ops-sh4.o ...@@ -10,7 +10,6 @@ obj-$(CONFIG_CPU_SUBTYPE_SH7763) += pci-sh7780.o ops-sh4.o
obj-$(CONFIG_CPU_SUBTYPE_SH7780) += pci-sh7780.o ops-sh4.o obj-$(CONFIG_CPU_SUBTYPE_SH7780) += pci-sh7780.o ops-sh4.o
obj-$(CONFIG_CPU_SUBTYPE_SH7785) += pci-sh7780.o ops-sh4.o obj-$(CONFIG_CPU_SUBTYPE_SH7785) += pci-sh7780.o ops-sh4.o
obj-$(CONFIG_CPU_SUBTYPE_SH7786) += pcie-sh7786.o ops-sh7786.o obj-$(CONFIG_CPU_SUBTYPE_SH7786) += pcie-sh7786.o ops-sh7786.o
obj-$(CONFIG_CPU_SH5) += pci-sh5.o ops-sh5.o
obj-$(CONFIG_SH_DREAMCAST) += ops-dreamcast.o fixups-dreamcast.o \ obj-$(CONFIG_SH_DREAMCAST) += ops-dreamcast.o fixups-dreamcast.o \
pci-dreamcast.o pci-dreamcast.o
......
// SPDX-License-Identifier: GPL-2.0
/*
* Support functions for the SH5 PCI hardware.
*
* Copyright (C) 2001 David J. Mckay (david.mckay@st.com)
* Copyright (C) 2003, 2004 Paul Mundt
* Copyright (C) 2004 Richard Curnow
*/
#include <linux/kernel.h>
#include <linux/rwsem.h>
#include <linux/smp.h>
#include <linux/interrupt.h>
#include <linux/init.h>
#include <linux/errno.h>
#include <linux/pci.h>
#include <linux/delay.h>
#include <linux/types.h>
#include <linux/irq.h>
#include <asm/io.h>
#include "pci-sh5.h"
static int sh5pci_read(struct pci_bus *bus, unsigned int devfn, int where,
int size, u32 *val)
{
SH5PCI_WRITE(PAR, CONFIG_CMD(bus, devfn, where));
switch (size) {
case 1:
*val = (u8)SH5PCI_READ_BYTE(PDR + (where & 3));
break;
case 2:
*val = (u16)SH5PCI_READ_SHORT(PDR + (where & 2));
break;
case 4:
*val = SH5PCI_READ(PDR);
break;
}
return PCIBIOS_SUCCESSFUL;
}
static int sh5pci_write(struct pci_bus *bus, unsigned int devfn, int where,
int size, u32 val)
{
SH5PCI_WRITE(PAR, CONFIG_CMD(bus, devfn, where));
switch (size) {
case 1:
SH5PCI_WRITE_BYTE(PDR + (where & 3), (u8)val);
break;
case 2:
SH5PCI_WRITE_SHORT(PDR + (where & 2), (u16)val);
break;
case 4:
SH5PCI_WRITE(PDR, val);
break;
}
return PCIBIOS_SUCCESSFUL;
}
struct pci_ops sh5_pci_ops = {
.read = sh5pci_read,
.write = sh5pci_write,
};
// SPDX-License-Identifier: GPL-2.0
/*
* Copyright (C) 2001 David J. Mckay (david.mckay@st.com)
* Copyright (C) 2003, 2004 Paul Mundt
* Copyright (C) 2004 Richard Curnow
*
* Support functions for the SH5 PCI hardware.
*/
#include <linux/kernel.h>
#include <linux/rwsem.h>
#include <linux/smp.h>
#include <linux/interrupt.h>
#include <linux/init.h>
#include <linux/errno.h>
#include <linux/pci.h>
#include <linux/delay.h>
#include <linux/types.h>
#include <linux/irq.h>
#include <cpu/irq.h>
#include <asm/io.h>
#include "pci-sh5.h"
unsigned long pcicr_virt;
unsigned long PCI_IO_AREA;
/* Rounds a number UP to the nearest power of two. Used for
* sizing the PCI window.
*/
static u32 __init r2p2(u32 num)
{
int i = 31;
u32 tmp = num;
if (num == 0)
return 0;
do {
if (tmp & (1 << 31))
break;
i--;
tmp <<= 1;
} while (i >= 0);
tmp = 1 << i;
/* If the original number isn't a power of 2, round it up */
if (tmp != num)
tmp <<= 1;
return tmp;
}
static irqreturn_t pcish5_err_irq(int irq, void *dev_id)
{
struct pt_regs *regs = get_irq_regs();
unsigned pci_int, pci_air, pci_cir, pci_aint;
pci_int = SH5PCI_READ(INT);
pci_cir = SH5PCI_READ(CIR);
pci_air = SH5PCI_READ(AIR);
if (pci_int) {
printk("PCI INTERRUPT (at %08llx)!\n", regs->pc);
printk("PCI INT -> 0x%x\n", pci_int & 0xffff);
printk("PCI AIR -> 0x%x\n", pci_air);
printk("PCI CIR -> 0x%x\n", pci_cir);
SH5PCI_WRITE(INT, ~0);
}
pci_aint = SH5PCI_READ(AINT);
if (pci_aint) {
printk("PCI ARB INTERRUPT!\n");
printk("PCI AINT -> 0x%x\n", pci_aint);
printk("PCI AIR -> 0x%x\n", pci_air);
printk("PCI CIR -> 0x%x\n", pci_cir);
SH5PCI_WRITE(AINT, ~0);
}
return IRQ_HANDLED;
}
static irqreturn_t pcish5_serr_irq(int irq, void *dev_id)
{
printk("SERR IRQ\n");
return IRQ_NONE;
}
static struct resource sh5_pci_resources[2];
static struct pci_channel sh5pci_controller = {
.pci_ops = &sh5_pci_ops,
.resources = sh5_pci_resources,
.nr_resources = ARRAY_SIZE(sh5_pci_resources),
.mem_offset = 0x00000000,
.io_offset = 0x00000000,
};
static int __init sh5pci_init(void)
{
unsigned long memStart = __pa(memory_start);
unsigned long memSize = __pa(memory_end) - memStart;
u32 lsr0;
u32 uval;
if (request_irq(IRQ_ERR, pcish5_err_irq,
0, "PCI Error",NULL) < 0) {
printk(KERN_ERR "PCISH5: Cannot hook PCI_PERR interrupt\n");
return -EINVAL;
}
if (request_irq(IRQ_SERR, pcish5_serr_irq,
0, "PCI SERR interrupt", NULL) < 0) {
printk(KERN_ERR "PCISH5: Cannot hook PCI_SERR interrupt\n");
return -EINVAL;
}
pcicr_virt = (unsigned long)ioremap(SH5PCI_ICR_BASE, 1024);
if (!pcicr_virt) {
panic("Unable to remap PCICR\n");
}
PCI_IO_AREA = (unsigned long)ioremap(SH5PCI_IO_BASE, 0x10000);
if (!PCI_IO_AREA) {
panic("Unable to remap PCIIO\n");
}
/* Clear snoop registers */
SH5PCI_WRITE(CSCR0, 0);
SH5PCI_WRITE(CSCR1, 0);
/* Switch off interrupts */
SH5PCI_WRITE(INTM, 0);
SH5PCI_WRITE(AINTM, 0);
SH5PCI_WRITE(PINTM, 0);
/* Set bus active, take it out of reset */
uval = SH5PCI_READ(CR);
/* Set command Register */
SH5PCI_WRITE(CR, uval | CR_LOCK_MASK | CR_CFINT| CR_FTO | CR_PFE |
CR_PFCS | CR_BMAM);
uval=SH5PCI_READ(CR);
/* Allow it to be a master */
/* NB - WE DISABLE I/O ACCESS to stop overlap */
/* set WAIT bit to enable stepping, an attempt to improve stability */
SH5PCI_WRITE_SHORT(CSR_CMD,
PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER |
PCI_COMMAND_WAIT);
/*
** Set translation mapping memory in order to convert the address
** used for the main bus, to the PCI internal address.
*/
SH5PCI_WRITE(MBR,0x40000000);
/* Always set the max size 512M */
SH5PCI_WRITE(MBMR, PCISH5_MEM_SIZCONV(512*1024*1024));
/*
** I/O addresses are mapped at internal PCI specific address
** as is described into the configuration bridge table.
** These are changed to 0, to allow cards that have legacy
** io such as vga to function correctly. We set the SH5 IOBAR to
** 256K, which is a bit big as we can only have 64K of address space
*/
SH5PCI_WRITE(IOBR,0x0);
/* Set up a 256K window. Totally pointless waste of address space */
SH5PCI_WRITE(IOBMR,0);
/* The SH5 has a HUGE 256K I/O region, which breaks the PCI spec.
* Ideally, we would want to map the I/O region somewhere, but it
* is so big this is not that easy!
*/
SH5PCI_WRITE(CSR_IBAR0,~0);
/* Set memory size value */
memSize = memory_end - memory_start;
/* Now we set up the mbars so the PCI bus can see the memory of
* the machine */
if (memSize < (1024 * 1024)) {
printk(KERN_ERR "PCISH5: Ridiculous memory size of 0x%lx?\n",
memSize);
return -EINVAL;
}
/* Set LSR 0 */
lsr0 = (memSize > (512 * 1024 * 1024)) ? 0x1ff00001 :
((r2p2(memSize) - 0x100000) | 0x1);
SH5PCI_WRITE(LSR0, lsr0);
/* Set MBAR 0 */
SH5PCI_WRITE(CSR_MBAR0, memory_start);
SH5PCI_WRITE(LAR0, memory_start);
SH5PCI_WRITE(CSR_MBAR1,0);
SH5PCI_WRITE(LAR1,0);
SH5PCI_WRITE(LSR1,0);
/* Enable the PCI interrupts on the device */
SH5PCI_WRITE(INTM, ~0);
SH5PCI_WRITE(AINTM, ~0);
SH5PCI_WRITE(PINTM, ~0);
sh5_pci_resources[0].start = PCI_IO_AREA;
sh5_pci_resources[0].end = PCI_IO_AREA + 0x10000;
sh5_pci_resources[1].start = memStart;
sh5_pci_resources[1].end = memStart + memSize;
return register_pci_controller(&sh5pci_controller);
}
arch_initcall(sh5pci_init);
/* SPDX-License-Identifier: GPL-2.0
*
* Copyright (C) 2001 David J. Mckay (david.mckay@st.com)
*
* Definitions for the SH5 PCI hardware.
*/
#ifndef __PCI_SH5_H
#define __PCI_SH5_H
/* Product ID */
#define PCISH5_PID 0x350d
/* vendor ID */
#define PCISH5_VID 0x1054
/* Configuration types */
#define ST_TYPE0 0x00 /* Configuration cycle type 0 */
#define ST_TYPE1 0x01 /* Configuration cycle type 1 */
/* VCR data */
#define PCISH5_VCR_STATUS 0x00
#define PCISH5_VCR_VERSION 0x08
/*
** ICR register offsets and bits
*/
#define PCISH5_ICR_CR 0x100 /* PCI control register values */
#define CR_PBAM (1<<12)
#define CR_PFCS (1<<11)
#define CR_FTO (1<<10)
#define CR_PFE (1<<9)
#define CR_TBS (1<<8)
#define CR_SPUE (1<<7)
#define CR_BMAM (1<<6)
#define CR_HOST (1<<5)
#define CR_CLKEN (1<<4)
#define CR_SOCS (1<<3)
#define CR_IOCS (1<<2)
#define CR_RSTCTL (1<<1)
#define CR_CFINT (1<<0)
#define CR_LOCK_MASK 0xa5000000
#define PCISH5_ICR_INT 0x114 /* Interrupt registert values */
#define INT_MADIM (1<<2)
#define PCISH5_ICR_LSR0 0X104 /* Local space register values */
#define PCISH5_ICR_LSR1 0X108 /* Local space register values */
#define PCISH5_ICR_LAR0 0x10c /* Local address register values */
#define PCISH5_ICR_LAR1 0x110 /* Local address register values */
#define PCISH5_ICR_INTM 0x118 /* Interrupt mask register values */
#define PCISH5_ICR_AIR 0x11c /* Interrupt error address information register values */
#define PCISH5_ICR_CIR 0x120 /* Interrupt error command information register values */
#define PCISH5_ICR_AINT 0x130 /* Interrupt error arbiter interrupt register values */
#define PCISH5_ICR_AINTM 0x134 /* Interrupt error arbiter interrupt mask register values */
#define PCISH5_ICR_BMIR 0x138 /* Interrupt error info register of bus master values */
#define PCISH5_ICR_PAR 0x1c0 /* Pio address register values */
#define PCISH5_ICR_MBR 0x1c4 /* Memory space bank register values */
#define PCISH5_ICR_IOBR 0x1c8 /* I/O space bank register values */
#define PCISH5_ICR_PINT 0x1cc /* power management interrupt register values */
#define PCISH5_ICR_PINTM 0x1d0 /* power management interrupt mask register values */
#define PCISH5_ICR_MBMR 0x1d8 /* memory space bank mask register values */
#define PCISH5_ICR_IOBMR 0x1dc /* I/O space bank mask register values */
#define PCISH5_ICR_CSCR0 0x210 /* PCI cache snoop control register 0 */
#define PCISH5_ICR_CSCR1 0x214 /* PCI cache snoop control register 1 */
#define PCISH5_ICR_PDR 0x220 /* Pio data register values */
/* These are configs space registers */
#define PCISH5_ICR_CSR_VID 0x000 /* Vendor id */
#define PCISH5_ICR_CSR_DID 0x002 /* Device id */
#define PCISH5_ICR_CSR_CMD 0x004 /* Command register */
#define PCISH5_ICR_CSR_STATUS 0x006 /* Stautus */
#define PCISH5_ICR_CSR_IBAR0 0x010 /* I/O base address register */
#define PCISH5_ICR_CSR_MBAR0 0x014 /* First Memory base address register */
#define PCISH5_ICR_CSR_MBAR1 0x018 /* Second Memory base address register */
/* Base address of registers */
#define SH5PCI_ICR_BASE (PHYS_PCI_BLOCK + 0x00040000)
#define SH5PCI_IO_BASE (PHYS_PCI_BLOCK + 0x00800000)
/* #define SH5PCI_VCR_BASE (P2SEG_PCICB_BLOCK + P2SEG) */
extern unsigned long pcicr_virt;
/* Register selection macro */
#define PCISH5_ICR_REG(x) ( pcicr_virt + (PCISH5_ICR_##x))
/* #define PCISH5_VCR_REG(x) ( SH5PCI_VCR_BASE (PCISH5_VCR_##x)) */
/* Write I/O functions */
#define SH5PCI_WRITE(reg,val) __raw_writel((u32)(val),PCISH5_ICR_REG(reg))
#define SH5PCI_WRITE_SHORT(reg,val) __raw_writew((u16)(val),PCISH5_ICR_REG(reg))
#define SH5PCI_WRITE_BYTE(reg,val) __raw_writeb((u8)(val),PCISH5_ICR_REG(reg))
/* Read I/O functions */
#define SH5PCI_READ(reg) __raw_readl(PCISH5_ICR_REG(reg))
#define SH5PCI_READ_SHORT(reg) __raw_readw(PCISH5_ICR_REG(reg))
#define SH5PCI_READ_BYTE(reg) __raw_readb(PCISH5_ICR_REG(reg))
/* Set PCI config bits */
#define SET_CONFIG_BITS(bus,devfn,where) ((((bus) << 16) | ((devfn) << 8) | ((where) & ~3)) | 0x80000000)
/* Set PCI command register */
#define CONFIG_CMD(bus, devfn, where) SET_CONFIG_BITS(bus->number,devfn,where)
/* Size converters */
#define PCISH5_MEM_SIZCONV(x) (((x / 0x40000) - 1) << 18)
#define PCISH5_IO_SIZCONV(x) (((x / 0x40000) - 1) << 18)
extern struct pci_ops sh5_pci_ops;
#endif /* __PCI_SH5_H */
...@@ -6,7 +6,7 @@ ...@@ -6,7 +6,7 @@
#ifndef __ASM_SH_BARRIER_H #ifndef __ASM_SH_BARRIER_H
#define __ASM_SH_BARRIER_H #define __ASM_SH_BARRIER_H
#if defined(CONFIG_CPU_SH4A) || defined(CONFIG_CPU_SH5) #if defined(CONFIG_CPU_SH4A)
#include <asm/cache_insns.h> #include <asm/cache_insns.h>
#endif #endif
...@@ -24,7 +24,7 @@ ...@@ -24,7 +24,7 @@
* Historically we have only done this type of barrier for the MMUCR, but * Historically we have only done this type of barrier for the MMUCR, but
* it's also necessary for the CCR, so we make it generic here instead. * it's also necessary for the CCR, so we make it generic here instead.
*/ */
#if defined(CONFIG_CPU_SH4A) || defined(CONFIG_CPU_SH5) #if defined(CONFIG_CPU_SH4A)
#define mb() __asm__ __volatile__ ("synco": : :"memory") #define mb() __asm__ __volatile__ ("synco": : :"memory")
#define rmb() mb() #define rmb() mb()
#define wmb() mb() #define wmb() mb()
......
...@@ -26,7 +26,6 @@ ...@@ -26,7 +26,6 @@
#include <asm-generic/bitops/non-atomic.h> #include <asm-generic/bitops/non-atomic.h>
#endif #endif
#ifdef CONFIG_SUPERH32
static inline unsigned long ffz(unsigned long word) static inline unsigned long ffz(unsigned long word)
{ {
unsigned long result; unsigned long result;
...@@ -60,31 +59,6 @@ static inline unsigned long __ffs(unsigned long word) ...@@ -60,31 +59,6 @@ static inline unsigned long __ffs(unsigned long word)
: "t"); : "t");
return result; return result;
} }
#else
static inline unsigned long ffz(unsigned long word)
{
unsigned long result, __d2, __d3;
__asm__("gettr tr0, %2\n\t"
"pta $+32, tr0\n\t"
"andi %1, 1, %3\n\t"
"beq %3, r63, tr0\n\t"
"pta $+4, tr0\n"
"0:\n\t"
"shlri.l %1, 1, %1\n\t"
"addi %0, 1, %0\n\t"
"andi %1, 1, %3\n\t"
"beqi %3, 1, tr0\n"
"1:\n\t"
"ptabs %2, tr0\n\t"
: "=r" (result), "=r" (word), "=r" (__d2), "=r" (__d3)
: "0" (0L), "1" (word));
return result;
}
#include <asm-generic/bitops/__ffs.h>
#endif
#include <asm-generic/bitops/find.h> #include <asm-generic/bitops/find.h>
#include <asm-generic/bitops/ffs.h> #include <asm-generic/bitops/ffs.h>
......
/* SPDX-License-Identifier: GPL-2.0 */ /* SPDX-License-Identifier: GPL-2.0 */
#ifndef __ASM_SH_BL_BIT_H #include <asm/bl_bit_32.h>
#define __ASM_SH_BL_BIT_H
#ifdef CONFIG_SUPERH32
# include <asm/bl_bit_32.h>
#else
# include <asm/bl_bit_64.h>
#endif
#endif /* __ASM_SH_BL_BIT_H */
/* SPDX-License-Identifier: GPL-2.0
*
* Copyright (C) 2000, 2001 Paolo Alberelli
* Copyright (C) 2003 Paul Mundt
* Copyright (C) 2004 Richard Curnow
*/
#ifndef __ASM_SH_BL_BIT_64_H
#define __ASM_SH_BL_BIT_64_H
#include <asm/processor.h>
#define SR_BL_LL 0x0000000010000000LL
static inline void set_bl_bit(void)
{
unsigned long long __dummy0, __dummy1 = SR_BL_LL;
__asm__ __volatile__("getcon " __SR ", %0\n\t"
"or %0, %1, %0\n\t"
"putcon %0, " __SR "\n\t"
: "=&r" (__dummy0)
: "r" (__dummy1));
}
static inline void clear_bl_bit(void)
{
unsigned long long __dummy0, __dummy1 = ~SR_BL_LL;
__asm__ __volatile__("getcon " __SR ", %0\n\t"
"and %0, %1, %0\n\t"
"putcon %0, " __SR "\n\t"
: "=&r" (__dummy0)
: "r" (__dummy1));
}
#endif /* __ASM_SH_BL_BIT_64_H */
...@@ -53,10 +53,6 @@ static void __init check_bugs(void) ...@@ -53,10 +53,6 @@ static void __init check_bugs(void)
*p++ = 's'; *p++ = 's';
*p++ = 'p'; *p++ = 'p';
break; break;
case CPU_FAMILY_SH5:
*p++ = '6';
*p++ = '4';
break;
case CPU_FAMILY_UNKNOWN: case CPU_FAMILY_UNKNOWN:
/* /*
* Specifically use CPU_FAMILY_UNKNOWN rather than * Specifically use CPU_FAMILY_UNKNOWN rather than
......
/* SPDX-License-Identifier: GPL-2.0 */ /* SPDX-License-Identifier: GPL-2.0 */
#ifndef __ASM_SH_CACHE_INSNS_H #include <asm/cache_insns_32.h>
#define __ASM_SH_CACHE_INSNS_H
#ifdef CONFIG_SUPERH32
# include <asm/cache_insns_32.h>
#else
# include <asm/cache_insns_64.h>
#endif
#endif /* __ASM_SH_CACHE_INSNS_H */
/* SPDX-License-Identifier: GPL-2.0
*
* Copyright (C) 2000, 2001 Paolo Alberelli
* Copyright (C) 2003 Paul Mundt
* Copyright (C) 2004 Richard Curnow
*/
#ifndef __ASM_SH_CACHE_INSNS_64_H
#define __ASM_SH_CACHE_INSNS_64_H
#define __icbi(addr) __asm__ __volatile__ ( "icbi %0, 0\n\t" : : "r" (addr))
#define __ocbp(addr) __asm__ __volatile__ ( "ocbp %0, 0\n\t" : : "r" (addr))
#define __ocbi(addr) __asm__ __volatile__ ( "ocbi %0, 0\n\t" : : "r" (addr))
#define __ocbwb(addr) __asm__ __volatile__ ( "ocbwb %0, 0\n\t" : : "r" (addr))
static inline reg_size_t register_align(void *val)
{
return (unsigned long long)(signed long long)(signed long)val;
}
#endif /* __ASM_SH_CACHE_INSNS_64_H */
/* SPDX-License-Identifier: GPL-2.0 */ /* SPDX-License-Identifier: GPL-2.0 */
#ifdef CONFIG_SUPERH32 #include <asm/checksum_32.h>
# include <asm/checksum_32.h>
#else
# include <asm-generic/checksum.h>
#endif
...@@ -133,28 +133,6 @@ typedef struct user_fpu_struct elf_fpregset_t; ...@@ -133,28 +133,6 @@ typedef struct user_fpu_struct elf_fpregset_t;
#define ELF_PLATFORM (utsname()->machine) #define ELF_PLATFORM (utsname()->machine)
#ifdef __SH5__
#define ELF_PLAT_INIT(_r, load_addr) \
do { _r->regs[0]=0; _r->regs[1]=0; _r->regs[2]=0; _r->regs[3]=0; \
_r->regs[4]=0; _r->regs[5]=0; _r->regs[6]=0; _r->regs[7]=0; \
_r->regs[8]=0; _r->regs[9]=0; _r->regs[10]=0; _r->regs[11]=0; \
_r->regs[12]=0; _r->regs[13]=0; _r->regs[14]=0; _r->regs[15]=0; \
_r->regs[16]=0; _r->regs[17]=0; _r->regs[18]=0; _r->regs[19]=0; \
_r->regs[20]=0; _r->regs[21]=0; _r->regs[22]=0; _r->regs[23]=0; \
_r->regs[24]=0; _r->regs[25]=0; _r->regs[26]=0; _r->regs[27]=0; \
_r->regs[28]=0; _r->regs[29]=0; _r->regs[30]=0; _r->regs[31]=0; \
_r->regs[32]=0; _r->regs[33]=0; _r->regs[34]=0; _r->regs[35]=0; \
_r->regs[36]=0; _r->regs[37]=0; _r->regs[38]=0; _r->regs[39]=0; \
_r->regs[40]=0; _r->regs[41]=0; _r->regs[42]=0; _r->regs[43]=0; \
_r->regs[44]=0; _r->regs[45]=0; _r->regs[46]=0; _r->regs[47]=0; \
_r->regs[48]=0; _r->regs[49]=0; _r->regs[50]=0; _r->regs[51]=0; \
_r->regs[52]=0; _r->regs[53]=0; _r->regs[54]=0; _r->regs[55]=0; \
_r->regs[56]=0; _r->regs[57]=0; _r->regs[58]=0; _r->regs[59]=0; \
_r->regs[60]=0; _r->regs[61]=0; _r->regs[62]=0; \
_r->tregs[0]=0; _r->tregs[1]=0; _r->tregs[2]=0; _r->tregs[3]=0; \
_r->tregs[4]=0; _r->tregs[5]=0; _r->tregs[6]=0; _r->tregs[7]=0; \
_r->sr = SR_FD | SR_MMU; } while (0)
#else
#define ELF_PLAT_INIT(_r, load_addr) \ #define ELF_PLAT_INIT(_r, load_addr) \
do { _r->regs[0]=0; _r->regs[1]=0; _r->regs[2]=0; _r->regs[3]=0; \ do { _r->regs[0]=0; _r->regs[1]=0; _r->regs[2]=0; _r->regs[3]=0; \
_r->regs[4]=0; _r->regs[5]=0; _r->regs[6]=0; _r->regs[7]=0; \ _r->regs[4]=0; _r->regs[5]=0; _r->regs[6]=0; _r->regs[7]=0; \
...@@ -182,7 +160,6 @@ do { \ ...@@ -182,7 +160,6 @@ do { \
_r->regs[14] = 0; \ _r->regs[14] = 0; \
_r->sr = SR_FD; \ _r->sr = SR_FD; \
} while (0) } while (0)
#endif
#define SET_PERSONALITY(ex) \ #define SET_PERSONALITY(ex) \
set_personality(PER_LINUX_32BIT | (current->personality & (~PER_MASK))) set_personality(PER_LINUX_32BIT | (current->personality & (~PER_MASK)))
......
...@@ -4,8 +4,4 @@ ...@@ -4,8 +4,4 @@
#include <asm-generic/extable.h> #include <asm-generic/extable.h>
#if defined(CONFIG_SUPERH64) && defined(CONFIG_MMU)
#define ARCH_HAS_SEARCH_EXTABLE
#endif
#endif #endif
...@@ -83,11 +83,7 @@ extern void __clear_fixmap(enum fixed_addresses idx, pgprot_t flags); ...@@ -83,11 +83,7 @@ extern void __clear_fixmap(enum fixed_addresses idx, pgprot_t flags);
* the start of the fixmap, and leave one page empty * the start of the fixmap, and leave one page empty
* at the top of mem.. * at the top of mem..
*/ */
#ifdef CONFIG_SUPERH32
#define FIXADDR_TOP (P4SEG - PAGE_SIZE) #define FIXADDR_TOP (P4SEG - PAGE_SIZE)
#else
#define FIXADDR_TOP ((unsigned long)(-PAGE_SIZE))
#endif
#define FIXADDR_SIZE (__end_of_fixed_addresses << PAGE_SHIFT) #define FIXADDR_SIZE (__end_of_fixed_addresses << PAGE_SHIFT)
#define FIXADDR_START (FIXADDR_TOP - FIXADDR_SIZE) #define FIXADDR_START (FIXADDR_TOP - FIXADDR_SIZE)
......
...@@ -115,12 +115,8 @@ static inline void pfx##reads##bwlq(volatile void __iomem *mem, \ ...@@ -115,12 +115,8 @@ static inline void pfx##reads##bwlq(volatile void __iomem *mem, \
__BUILD_MEMORY_STRING(__raw_, b, u8) __BUILD_MEMORY_STRING(__raw_, b, u8)
__BUILD_MEMORY_STRING(__raw_, w, u16) __BUILD_MEMORY_STRING(__raw_, w, u16)
#ifdef CONFIG_SUPERH32
void __raw_writesl(void __iomem *addr, const void *data, int longlen); void __raw_writesl(void __iomem *addr, const void *data, int longlen);
void __raw_readsl(const void __iomem *addr, void *data, int longlen); void __raw_readsl(const void __iomem *addr, void *data, int longlen);
#else
__BUILD_MEMORY_STRING(__raw_, l, u32)
#endif
__BUILD_MEMORY_STRING(__raw_, q, u64) __BUILD_MEMORY_STRING(__raw_, q, u64)
......
...@@ -66,8 +66,5 @@ extern void irq_finish(unsigned int irq); ...@@ -66,8 +66,5 @@ extern void irq_finish(unsigned int irq);
#endif #endif
#include <asm-generic/irq.h> #include <asm-generic/irq.h>
#ifdef CONFIG_CPU_SH5
#include <cpu/irq.h>
#endif
#endif /* __ASM_SH_IRQ_H */ #endif /* __ASM_SH_IRQ_H */
...@@ -48,11 +48,7 @@ ...@@ -48,11 +48,7 @@
*/ */
#define MMU_VPN_MASK 0xfffff000 #define MMU_VPN_MASK 0xfffff000
#if defined(CONFIG_SUPERH32)
#include <asm/mmu_context_32.h> #include <asm/mmu_context_32.h>
#else
#include <asm/mmu_context_64.h>
#endif
/* /*
* Get MMU context if needed. * Get MMU context if needed.
...@@ -74,14 +70,6 @@ static inline void get_mmu_context(struct mm_struct *mm, unsigned int cpu) ...@@ -74,14 +70,6 @@ static inline void get_mmu_context(struct mm_struct *mm, unsigned int cpu)
*/ */
local_flush_tlb_all(); local_flush_tlb_all();
#ifdef CONFIG_SUPERH64
/*
* The SH-5 cache uses the ASIDs, requiring both the I and D
* cache to be flushed when the ASID is exhausted. Weak.
*/
flush_cache_all();
#endif
/* /*
* Fix version; Note that we avoid version #0 * Fix version; Note that we avoid version #0
* to distinguish NO_CONTEXT. * to distinguish NO_CONTEXT.
......
/* SPDX-License-Identifier: GPL-2.0 */
#ifndef __ASM_SH_MMU_CONTEXT_64_H
#define __ASM_SH_MMU_CONTEXT_64_H
/*
* sh64-specific mmu_context interface.
*
* Copyright (C) 2000, 2001 Paolo Alberelli
* Copyright (C) 2003 - 2007 Paul Mundt
*/
#include <cpu/registers.h>
#include <asm/cacheflush.h>
#define SR_ASID_MASK 0xffffffffff00ffffULL
#define SR_ASID_SHIFT 16
/*
* Destroy context related info for an mm_struct that is about
* to be put to rest.
*/
static inline void destroy_context(struct mm_struct *mm)
{
/* Well, at least free TLB entries */
flush_tlb_mm(mm);
}
static inline unsigned long get_asid(void)
{
unsigned long long sr;
asm volatile ("getcon " __SR ", %0\n\t"
: "=r" (sr));
sr = (sr >> SR_ASID_SHIFT) & MMU_CONTEXT_ASID_MASK;
return (unsigned long) sr;
}
/* Set ASID into SR */
static inline void set_asid(unsigned long asid)
{
unsigned long long sr, pc;
asm volatile ("getcon " __SR ", %0" : "=r" (sr));
sr = (sr & SR_ASID_MASK) | (asid << SR_ASID_SHIFT);
/*
* It is possible that this function may be inlined and so to avoid
* the assembler reporting duplicate symbols we make use of the
* gas trick of generating symbols using numerics and forward
* reference.
*/
asm volatile ("movi 1, %1\n\t"
"shlli %1, 28, %1\n\t"
"or %0, %1, %1\n\t"
"putcon %1, " __SR "\n\t"
"putcon %0, " __SSR "\n\t"
"movi 1f, %1\n\t"
"ori %1, 1 , %1\n\t"
"putcon %1, " __SPC "\n\t"
"rte\n"
"1:\n\t"
: "=r" (sr), "=r" (pc) : "0" (sr));
}
/* arch/sh/kernel/cpu/sh5/entry.S */
extern unsigned long switch_and_save_asid(unsigned long new_asid);
/* No spare register to twiddle, so use a software cache */
extern pgd_t *mmu_pdtp_cache;
#define set_TTB(pgd) (mmu_pdtp_cache = (pgd))
#define get_TTB() (mmu_pdtp_cache)
#endif /* __ASM_SH_MMU_CONTEXT_64_H */
...@@ -35,8 +35,6 @@ ...@@ -35,8 +35,6 @@
#define HPAGE_SHIFT 22 #define HPAGE_SHIFT 22
#elif defined(CONFIG_HUGETLB_PAGE_SIZE_64MB) #elif defined(CONFIG_HUGETLB_PAGE_SIZE_64MB)
#define HPAGE_SHIFT 26 #define HPAGE_SHIFT 26
#elif defined(CONFIG_HUGETLB_PAGE_SIZE_512MB)
#define HPAGE_SHIFT 29
#endif #endif
#ifdef CONFIG_HUGETLB_PAGE #ifdef CONFIG_HUGETLB_PAGE
...@@ -82,18 +80,12 @@ typedef struct { unsigned long long pgd; } pgd_t; ...@@ -82,18 +80,12 @@ typedef struct { unsigned long long pgd; } pgd_t;
((x).pte_low | ((unsigned long long)(x).pte_high << 32)) ((x).pte_low | ((unsigned long long)(x).pte_high << 32))
#define __pte(x) \ #define __pte(x) \
({ pte_t __pte = {(x), ((unsigned long long)(x)) >> 32}; __pte; }) ({ pte_t __pte = {(x), ((unsigned long long)(x)) >> 32}; __pte; })
#elif defined(CONFIG_SUPERH32) #else
typedef struct { unsigned long pte_low; } pte_t; typedef struct { unsigned long pte_low; } pte_t;
typedef struct { unsigned long pgprot; } pgprot_t; typedef struct { unsigned long pgprot; } pgprot_t;
typedef struct { unsigned long pgd; } pgd_t; typedef struct { unsigned long pgd; } pgd_t;
#define pte_val(x) ((x).pte_low) #define pte_val(x) ((x).pte_low)
#define __pte(x) ((pte_t) { (x) } ) #define __pte(x) ((pte_t) { (x) } )
#else
typedef struct { unsigned long long pte_low; } pte_t;
typedef struct { unsigned long long pgprot; } pgprot_t;
typedef struct { unsigned long pgd; } pgd_t;
#define pte_val(x) ((x).pte_low)
#define __pte(x) ((pte_t) { (x) } )
#endif #endif
#define pgd_val(x) ((x).pgd) #define pgd_val(x) ((x).pgd)
...@@ -191,15 +183,4 @@ typedef struct page *pgtable_t; ...@@ -191,15 +183,4 @@ typedef struct page *pgtable_t;
*/ */
#define ARCH_DMA_MINALIGN L1_CACHE_BYTES #define ARCH_DMA_MINALIGN L1_CACHE_BYTES
#ifdef CONFIG_SUPERH64
/*
* While BYTES_PER_WORD == 4 on the current sh64 ABI, GCC will still
* happily generate {ld/st}.q pairs, requiring us to have 8-byte
* alignment to avoid traps. The kmalloc alignment is guaranteed by
* virtue of L1_CACHE_BYTES, requiring this to only be special cased
* for slab caches.
*/
#define ARCH_SLAB_MINALIGN 8
#endif
#endif /* __ASM_SH_PAGE_H */ #endif /* __ASM_SH_PAGE_H */
...@@ -76,18 +76,10 @@ static inline unsigned long phys_addr_mask(void) ...@@ -76,18 +76,10 @@ static inline unsigned long phys_addr_mask(void)
#define PTE_PHYS_MASK (phys_addr_mask() & PAGE_MASK) #define PTE_PHYS_MASK (phys_addr_mask() & PAGE_MASK)
#define PTE_FLAGS_MASK (~(PTE_PHYS_MASK) << PAGE_SHIFT) #define PTE_FLAGS_MASK (~(PTE_PHYS_MASK) << PAGE_SHIFT)
#ifdef CONFIG_SUPERH32
#define VMALLOC_START (P3SEG) #define VMALLOC_START (P3SEG)
#else
#define VMALLOC_START (0xf0000000)
#endif
#define VMALLOC_END (FIXADDR_START-2*PAGE_SIZE) #define VMALLOC_END (FIXADDR_START-2*PAGE_SIZE)
#if defined(CONFIG_SUPERH32)
#include <asm/pgtable_32.h> #include <asm/pgtable_32.h>
#else
#include <asm/pgtable_64.h>
#endif
/* /*
* SH-X and lower (legacy) SuperH parts (SH-3, SH-4, some SH-4A) can't do page * SH-X and lower (legacy) SuperH parts (SH-3, SH-4, some SH-4A) can't do page
...@@ -159,15 +151,6 @@ static inline bool pte_access_permitted(pte_t pte, bool write) ...@@ -159,15 +151,6 @@ static inline bool pte_access_permitted(pte_t pte, bool write)
prot |= _PAGE_EXT(_PAGE_EXT_KERN_WRITE | _PAGE_EXT_USER_WRITE); prot |= _PAGE_EXT(_PAGE_EXT_KERN_WRITE | _PAGE_EXT_USER_WRITE);
return __pte_access_permitted(pte, prot); return __pte_access_permitted(pte, prot);
} }
#elif defined(CONFIG_SUPERH64)
static inline bool pte_access_permitted(pte_t pte, bool write)
{
u64 prot = _PAGE_PRESENT | _PAGE_USER | _PAGE_READ;
if (write)
prot |= _PAGE_WRITE;
return __pte_access_permitted(pte, prot);
}
#else #else
static inline bool pte_access_permitted(pte_t pte, bool write) static inline bool pte_access_permitted(pte_t pte, bool write)
{ {
......
This diff is collapsed.
/* SPDX-License-Identifier: GPL-2.0 */ /* SPDX-License-Identifier: GPL-2.0 */
# ifdef CONFIG_SUPERH32 #include <asm/posix_types_32.h>
# include <asm/posix_types_32.h>
# else
# include <asm/posix_types_64.h>
# endif
...@@ -39,9 +39,6 @@ enum cpu_type { ...@@ -39,9 +39,6 @@ enum cpu_type {
/* SH4AL-DSP types */ /* SH4AL-DSP types */
CPU_SH7343, CPU_SH7722, CPU_SH7366, CPU_SH7372, CPU_SH7343, CPU_SH7722, CPU_SH7366, CPU_SH7372,
/* SH-5 types */
CPU_SH5_101, CPU_SH5_103,
/* Unknown subtype */ /* Unknown subtype */
CPU_SH_NONE CPU_SH_NONE
}; };
...@@ -53,7 +50,6 @@ enum cpu_family { ...@@ -53,7 +50,6 @@ enum cpu_family {
CPU_FAMILY_SH4, CPU_FAMILY_SH4,
CPU_FAMILY_SH4A, CPU_FAMILY_SH4A,
CPU_FAMILY_SH4AL_DSP, CPU_FAMILY_SH4AL_DSP,
CPU_FAMILY_SH5,
CPU_FAMILY_UNKNOWN, CPU_FAMILY_UNKNOWN,
}; };
...@@ -167,18 +163,12 @@ int vsyscall_init(void); ...@@ -167,18 +163,12 @@ int vsyscall_init(void);
*/ */
#ifdef CONFIG_CPU_SH2A #ifdef CONFIG_CPU_SH2A
extern unsigned int instruction_size(unsigned int insn); extern unsigned int instruction_size(unsigned int insn);
#elif defined(CONFIG_SUPERH32)
#define instruction_size(insn) (2)
#else #else
#define instruction_size(insn) (4) #define instruction_size(insn) (2)
#endif #endif
#endif /* __ASSEMBLY__ */ #endif /* __ASSEMBLY__ */
#ifdef CONFIG_SUPERH32 #include <asm/processor_32.h>
# include <asm/processor_32.h>
#else
# include <asm/processor_64.h>
#endif
#endif /* __ASM_SH_PROCESSOR_H */ #endif /* __ASM_SH_PROCESSOR_H */
/* SPDX-License-Identifier: GPL-2.0 */
#ifndef __ASM_SH_PROCESSOR_64_H
#define __ASM_SH_PROCESSOR_64_H
/*
* include/asm-sh/processor_64.h
*
* Copyright (C) 2000, 2001 Paolo Alberelli
* Copyright (C) 2003 Paul Mundt
* Copyright (C) 2004 Richard Curnow
*/
#ifndef __ASSEMBLY__
#include <linux/compiler.h>
#include <asm/page.h>
#include <asm/types.h>
#include <cpu/registers.h>
#endif
/*
* User space process size: 2GB - 4k.
*/
#define TASK_SIZE 0x7ffff000UL
#define STACK_TOP TASK_SIZE
#define STACK_TOP_MAX STACK_TOP
/* This decides where the kernel will search for a free chunk of vm
* space during mmap's.
*/
#define TASK_UNMAPPED_BASE PAGE_ALIGN(TASK_SIZE / 3)
/*
* Bit of SR register
*
* FD-bit:
* When it's set, it means the processor doesn't have right to use FPU,
* and it results exception when the floating operation is executed.
*
* IMASK-bit:
* Interrupt level mask
*
* STEP-bit:
* Single step bit
*
*/
#if defined(CONFIG_SH64_SR_WATCH)
#define SR_MMU 0x84000000
#else
#define SR_MMU 0x80000000
#endif
#define SR_IMASK 0x000000f0
#define SR_FD 0x00008000
#define SR_SSTEP 0x08000000
#ifndef __ASSEMBLY__
/*
* FPU structure and data : require 8-byte alignment as we need to access it
with fld.p, fst.p
*/
struct sh_fpu_hard_struct {
unsigned long fp_regs[64];
unsigned int fpscr;
/* long status; * software status information */
};
/* Dummy fpu emulator */
struct sh_fpu_soft_struct {
unsigned long fp_regs[64];
unsigned int fpscr;
unsigned char lookahead;
unsigned long entry_pc;
};
union thread_xstate {
struct sh_fpu_hard_struct hardfpu;
struct sh_fpu_soft_struct softfpu;
/*
* The structure definitions only produce 32 bit alignment, yet we need
* to access them using 64 bit load/store as well.
*/
unsigned long long alignment_dummy;
};
struct thread_struct {
unsigned long sp;
unsigned long pc;
/* Various thread flags, see SH_THREAD_xxx */
unsigned long flags;
/* This stores the address of the pt_regs built during a context
switch, or of the register save area built for a kernel mode
exception. It is used for backtracing the stack of a sleeping task
or one that traps in kernel mode. */
struct pt_regs *kregs;
/* This stores the address of the pt_regs constructed on entry from
user mode. It is a fixed value over the lifetime of a process, or
NULL for a kernel thread. */
struct pt_regs *uregs;
unsigned long address;
/* Hardware debugging registers may come here */
/* floating point info */
union thread_xstate *xstate;
/*
* fpu_counter contains the number of consecutive context switches
* that the FPU is used. If this is over a threshold, the lazy fpu
* saving becomes unlazy to save the trap. This is an unsigned char
* so that after 256 times the counter wraps and the behavior turns
* lazy again; this to deal with bursty apps that only use FPU for
* a short time
*/
unsigned char fpu_counter;
};
#define INIT_MMAP \
{ &init_mm, 0, 0, NULL, PAGE_SHARED, VM_READ | VM_WRITE | VM_EXEC, 1, NULL, NULL }
#define INIT_THREAD { \
.sp = sizeof(init_stack) + \
(long) &init_stack, \
.pc = 0, \
.kregs = &fake_swapper_regs, \
.uregs = NULL, \
.address = 0, \
.flags = 0, \
}
/*
* Do necessary setup to start up a newly executed thread.
*/
#define SR_USER (SR_MMU | SR_FD)
#define start_thread(_regs, new_pc, new_sp) \
_regs->sr = SR_USER; /* User mode. */ \
_regs->pc = new_pc - 4; /* Compensate syscall exit */ \
_regs->pc |= 1; /* Set SHmedia ! */ \
_regs->regs[18] = 0; \
_regs->regs[15] = new_sp
/* Forward declaration, a strange C thing */
struct task_struct;
struct mm_struct;
/* Free all resources held by a thread. */
extern void release_thread(struct task_struct *);
/*
* FPU lazy state save handling.
*/
static inline void disable_fpu(void)
{
unsigned long long __dummy;
/* Set FD flag in SR */
__asm__ __volatile__("getcon " __SR ", %0\n\t"
"or %0, %1, %0\n\t"
"putcon %0, " __SR "\n\t"
: "=&r" (__dummy)
: "r" (SR_FD));
}
static inline void enable_fpu(void)
{
unsigned long long __dummy;
/* Clear out FD flag in SR */
__asm__ __volatile__("getcon " __SR ", %0\n\t"
"and %0, %1, %0\n\t"
"putcon %0, " __SR "\n\t"
: "=&r" (__dummy)
: "r" (~SR_FD));
}
/* Round to nearest, no exceptions on inexact, overflow, underflow,
zero-divide, invalid. Configure option for whether to flush denorms to
zero, or except if a denorm is encountered. */
#if defined(CONFIG_SH64_FPU_DENORM_FLUSH)
#define FPSCR_INIT 0x00040000
#else
#define FPSCR_INIT 0x00000000
#endif
#ifdef CONFIG_SH_FPU
/* Initialise the FP state of a task */
void fpinit(struct sh_fpu_hard_struct *fpregs);
#else
#define fpinit(fpregs) do { } while (0)
#endif
extern struct task_struct *last_task_used_math;
/*
* Return saved PC of a blocked thread.
*/
#define thread_saved_pc(tsk) (tsk->thread.pc)
extern unsigned long get_wchan(struct task_struct *p);
#define KSTK_EIP(tsk) ((tsk)->thread.pc)
#define KSTK_ESP(tsk) ((tsk)->thread.sp)
#endif /* __ASSEMBLY__ */
#endif /* __ASM_SH_PROCESSOR_64_H */
/* SPDX-License-Identifier: GPL-2.0 */
#ifndef __ASM_SH_PTRACE_64_H
#define __ASM_SH_PTRACE_64_H
#include <uapi/asm/ptrace_64.h>
#define MAX_REG_OFFSET offsetof(struct pt_regs, tregs[7])
static inline long regs_return_value(struct pt_regs *regs)
{
return regs->regs[3];
}
#endif /* __ASM_SH_PTRACE_64_H */
/* SPDX-License-Identifier: GPL-2.0 */ /* SPDX-License-Identifier: GPL-2.0 */
#ifdef CONFIG_SUPERH32 #include <asm/string_32.h>
# include <asm/string_32.h>
#else
# include <asm/string_64.h>
#endif
/* SPDX-License-Identifier: GPL-2.0 */
#ifndef __ASM_SH_STRING_64_H
#define __ASM_SH_STRING_64_H
#ifdef __KERNEL__
#define __HAVE_ARCH_MEMSET
extern void *memset(void *__s, int __c, size_t __count);
#define __HAVE_ARCH_MEMCPY
extern void *memcpy(void *dest, const void *src, size_t count);
#define __HAVE_ARCH_STRLEN
extern size_t strlen(const char *);
#define __HAVE_ARCH_STRCPY
extern char *strcpy(char *__dest, const char *__src);
#endif /* __KERNEL__ */
#endif /* __ASM_SH_STRING_64_H */
...@@ -4,13 +4,4 @@ ...@@ -4,13 +4,4 @@
* Copyright (C) 2003 Paul Mundt * Copyright (C) 2003 Paul Mundt
* Copyright (C) 2004 Richard Curnow * Copyright (C) 2004 Richard Curnow
*/ */
#ifndef __ASM_SH_SWITCH_TO_H #include <asm/switch_to_32.h>
#define __ASM_SH_SWITCH_TO_H
#ifdef CONFIG_SUPERH32
# include <asm/switch_to_32.h>
#else
# include <asm/switch_to_64.h>
#endif
#endif /* __ASM_SH_SWITCH_TO_H */
/* SPDX-License-Identifier: GPL-2.0
*
* Copyright (C) 2000, 2001 Paolo Alberelli
* Copyright (C) 2003 Paul Mundt
* Copyright (C) 2004 Richard Curnow
*/
#ifndef __ASM_SH_SWITCH_TO_64_H
#define __ASM_SH_SWITCH_TO_64_H
struct thread_struct;
struct task_struct;
/*
* switch_to() should switch tasks to task nr n, first
*/
struct task_struct *sh64_switch_to(struct task_struct *prev,
struct thread_struct *prev_thread,
struct task_struct *next,
struct thread_struct *next_thread);
#define switch_to(prev,next,last) \
do { \
if (last_task_used_math != next) { \
struct pt_regs *regs = next->thread.uregs; \
if (regs) regs->sr |= SR_FD; \
} \
last = sh64_switch_to(prev, &prev->thread, next, \
&next->thread); \
} while (0)
#endif /* __ASM_SH_SWITCH_TO_64_H */
...@@ -4,10 +4,6 @@ ...@@ -4,10 +4,6 @@
extern const unsigned long sys_call_table[]; extern const unsigned long sys_call_table[];
#ifdef CONFIG_SUPERH32 #include <asm/syscall_32.h>
# include <asm/syscall_32.h>
#else
# include <asm/syscall_64.h>
#endif
#endif /* __ASM_SH_SYSCALL_H */ #endif /* __ASM_SH_SYSCALL_H */
/* SPDX-License-Identifier: GPL-2.0 */
#ifndef __ASM_SH_SYSCALL_64_H
#define __ASM_SH_SYSCALL_64_H
#include <uapi/linux/audit.h>
#include <linux/kernel.h>
#include <linux/sched.h>
#include <asm/ptrace.h>
/* The system call number is given by the user in R9 */
static inline long syscall_get_nr(struct task_struct *task,
struct pt_regs *regs)
{
return (regs->syscall_nr >= 0) ? regs->regs[9] : -1L;
}
static inline void syscall_rollback(struct task_struct *task,
struct pt_regs *regs)
{
/*
* XXX: This needs some thought. On SH we don't
* save away the original R9 value anywhere.
*/
}
static inline long syscall_get_error(struct task_struct *task,
struct pt_regs *regs)
{
return IS_ERR_VALUE(regs->regs[9]) ? regs->regs[9] : 0;
}
static inline long syscall_get_return_value(struct task_struct *task,
struct pt_regs *regs)
{
return regs->regs[9];
}
static inline void syscall_set_return_value(struct task_struct *task,
struct pt_regs *regs,
int error, long val)
{
if (error)
regs->regs[9] = -error;
else
regs->regs[9] = val;
}
static inline void syscall_get_arguments(struct task_struct *task,
struct pt_regs *regs,
unsigned long *args)
{
memcpy(args, &regs->regs[2], 6 * sizeof(args[0]));
}
static inline void syscall_set_arguments(struct task_struct *task,
struct pt_regs *regs,
const unsigned long *args)
{
memcpy(&regs->regs[2], args, 6 * sizeof(args[0]));
}
static inline int syscall_get_arch(struct task_struct *task)
{
int arch = AUDIT_ARCH_SH;
#ifdef CONFIG_64BIT
arch |= __AUDIT_ARCH_64BIT;
#endif
#ifdef CONFIG_CPU_LITTLE_ENDIAN
arch |= __AUDIT_ARCH_LE;
#endif
return arch;
}
#endif /* __ASM_SH_SYSCALL_64_H */
...@@ -2,8 +2,6 @@ ...@@ -2,8 +2,6 @@
#ifndef __ASM_SH_SYSCALLS_H #ifndef __ASM_SH_SYSCALLS_H
#define __ASM_SH_SYSCALLS_H #define __ASM_SH_SYSCALLS_H
#ifdef __KERNEL__
asmlinkage int old_mmap(unsigned long addr, unsigned long len, asmlinkage int old_mmap(unsigned long addr, unsigned long len,
unsigned long prot, unsigned long flags, unsigned long prot, unsigned long flags,
int fd, unsigned long off); int fd, unsigned long off);
...@@ -11,11 +9,6 @@ asmlinkage long sys_mmap2(unsigned long addr, unsigned long len, ...@@ -11,11 +9,6 @@ asmlinkage long sys_mmap2(unsigned long addr, unsigned long len,
unsigned long prot, unsigned long flags, unsigned long prot, unsigned long flags,
unsigned long fd, unsigned long pgoff); unsigned long fd, unsigned long pgoff);
#ifdef CONFIG_SUPERH32 #include <asm/syscalls_32.h>
# include <asm/syscalls_32.h>
#else
# include <asm/syscalls_64.h>
#endif
#endif /* __KERNEL__ */
#endif /* __ASM_SH_SYSCALLS_H */ #endif /* __ASM_SH_SYSCALLS_H */
/* SPDX-License-Identifier: GPL-2.0 */
#ifndef __ASM_SH_SYSCALLS_64_H
#define __ASM_SH_SYSCALLS_64_H
#ifdef __KERNEL__
#include <linux/compiler.h>
#include <linux/linkage.h>
#include <linux/types.h>
struct pt_regs;
/* Misc syscall related bits */
asmlinkage long long do_syscall_trace_enter(struct pt_regs *regs);
asmlinkage void do_syscall_trace_leave(struct pt_regs *regs);
#endif /* __KERNEL__ */
#endif /* __ASM_SH_SYSCALLS_64_H */
...@@ -70,9 +70,7 @@ register unsigned long current_stack_pointer asm("r15") __used; ...@@ -70,9 +70,7 @@ register unsigned long current_stack_pointer asm("r15") __used;
static inline struct thread_info *current_thread_info(void) static inline struct thread_info *current_thread_info(void)
{ {
struct thread_info *ti; struct thread_info *ti;
#if defined(CONFIG_SUPERH64) #if defined(CONFIG_CPU_HAS_SR_RB)
__asm__ __volatile__ ("getcon cr17, %0" : "=r" (ti));
#elif defined(CONFIG_CPU_HAS_SR_RB)
__asm__ __volatile__ ("stc r7_bank, %0" : "=r" (ti)); __asm__ __volatile__ ("stc r7_bank, %0" : "=r" (ti));
#else #else
unsigned long __dummy; unsigned long __dummy;
......
...@@ -2,10 +2,6 @@ ...@@ -2,10 +2,6 @@
#ifndef __ASM_SH_TLB_H #ifndef __ASM_SH_TLB_H
#define __ASM_SH_TLB_H #define __ASM_SH_TLB_H
#ifdef CONFIG_SUPERH64
# include <asm/tlb_64.h>
#endif
#ifndef __ASSEMBLY__ #ifndef __ASSEMBLY__
#include <linux/pagemap.h> #include <linux/pagemap.h>
...@@ -14,7 +10,7 @@ ...@@ -14,7 +10,7 @@
#include <asm-generic/tlb.h> #include <asm-generic/tlb.h>
#if defined(CONFIG_CPU_SH4) || defined(CONFIG_SUPERH64) #if defined(CONFIG_CPU_SH4)
extern void tlb_wire_entry(struct vm_area_struct *, unsigned long, pte_t); extern void tlb_wire_entry(struct vm_area_struct *, unsigned long, pte_t);
extern void tlb_unwire_entry(void); extern void tlb_unwire_entry(void);
#else #else
......
/* SPDX-License-Identifier: GPL-2.0
*
* include/asm-sh/tlb_64.h
*
* Copyright (C) 2003 Paul Mundt
*/
#ifndef __ASM_SH_TLB_64_H
#define __ASM_SH_TLB_64_H
/* ITLB defines */
#define ITLB_FIXED 0x00000000 /* First fixed ITLB, see head.S */
#define ITLB_LAST_VAR_UNRESTRICTED 0x000003F0 /* Last ITLB */
/* DTLB defines */
#define DTLB_FIXED 0x00800000 /* First fixed DTLB, see head.S */
#define DTLB_LAST_VAR_UNRESTRICTED 0x008003F0 /* Last DTLB */
#ifndef __ASSEMBLY__
/**
* for_each_dtlb_entry - Iterate over free (non-wired) DTLB entries
*
* @tlb: TLB entry
*/
#define for_each_dtlb_entry(tlb) \
for (tlb = cpu_data->dtlb.first; \
tlb <= cpu_data->dtlb.last; \
tlb += cpu_data->dtlb.step)
/**
* for_each_itlb_entry - Iterate over free (non-wired) ITLB entries
*
* @tlb: TLB entry
*/
#define for_each_itlb_entry(tlb) \
for (tlb = cpu_data->itlb.first; \
tlb <= cpu_data->itlb.last; \
tlb += cpu_data->itlb.step)
/**
* __flush_tlb_slot - Flushes TLB slot @slot.
*
* @slot: Address of TLB slot.
*/
static inline void __flush_tlb_slot(unsigned long long slot)
{
__asm__ __volatile__ ("putcfg %0, 0, r63\n" : : "r" (slot));
}
#ifdef CONFIG_MMU
/* arch/sh64/mm/tlb.c */
int sh64_tlb_init(void);
unsigned long long sh64_next_free_dtlb_entry(void);
unsigned long long sh64_get_wired_dtlb_entry(void);
int sh64_put_wired_dtlb_entry(unsigned long long entry);
void sh64_setup_tlb_slot(unsigned long long config_addr, unsigned long eaddr,
unsigned long asid, unsigned long paddr);
void sh64_teardown_tlb_slot(unsigned long long config_addr);
#else
#define sh64_tlb_init() do { } while (0)
#define sh64_next_free_dtlb_entry() (0)
#define sh64_get_wired_dtlb_entry() (0)
#define sh64_put_wired_dtlb_entry(entry) do { } while (0)
#define sh64_setup_tlb_slot(conf, virt, asid, phys) do { } while (0)
#define sh64_teardown_tlb_slot(addr) do { } while (0)
#endif /* CONFIG_MMU */
#endif /* __ASSEMBLY__ */
#endif /* __ASM_SH_TLB_64_H */
...@@ -4,11 +4,7 @@ ...@@ -4,11 +4,7 @@
#include <linux/compiler.h> #include <linux/compiler.h>
#ifdef CONFIG_SUPERH32
# include <asm/traps_32.h> # include <asm/traps_32.h>
#else
# include <asm/traps_64.h>
#endif
BUILD_TRAP_HANDLER(address_error); BUILD_TRAP_HANDLER(address_error);
BUILD_TRAP_HANDLER(debug); BUILD_TRAP_HANDLER(debug);
......
/* SPDX-License-Identifier: GPL-2.0
*
* Copyright (C) 2000, 2001 Paolo Alberelli
* Copyright (C) 2003 Paul Mundt
* Copyright (C) 2004 Richard Curnow
*/
#ifndef __ASM_SH_TRAPS_64_H
#define __ASM_SH_TRAPS_64_H
#include <cpu/registers.h>
extern void phys_stext(void);
#define lookup_exception_vector() \
({ \
unsigned long _vec; \
\
__asm__ __volatile__ ( \
"getcon " __EXPEVT ", %0\n\t" \
: "=r" (_vec) \
); \
\
_vec; \
})
static inline void trigger_address_error(void)
{
phys_stext();
}
#define BUILD_TRAP_HANDLER(name) \
asmlinkage void name##_trap_handler(unsigned int vec, struct pt_regs *regs)
#define TRAP_HANDLER_DECL
#endif /* __ASM_SH_TRAPS_64_H */
...@@ -9,13 +9,8 @@ ...@@ -9,13 +9,8 @@
*/ */
#ifndef __ASSEMBLY__ #ifndef __ASSEMBLY__
#ifdef CONFIG_SUPERH32
typedef u16 insn_size_t; typedef u16 insn_size_t;
typedef u32 reg_size_t; typedef u32 reg_size_t;
#else
typedef u32 insn_size_t;
typedef u64 reg_size_t;
#endif
#endif /* __ASSEMBLY__ */ #endif /* __ASSEMBLY__ */
#endif /* __ASM_SH_TYPES_H */ #endif /* __ASM_SH_TYPES_H */
...@@ -96,11 +96,7 @@ struct __large_struct { unsigned long buf[100]; }; ...@@ -96,11 +96,7 @@ struct __large_struct { unsigned long buf[100]; };
__pu_err; \ __pu_err; \
}) })
#ifdef CONFIG_SUPERH32
# include <asm/uaccess_32.h> # include <asm/uaccess_32.h>
#else
# include <asm/uaccess_64.h>
#endif
extern long strncpy_from_user(char *dest, const char __user *src, long count); extern long strncpy_from_user(char *dest, const char __user *src, long count);
......
/* SPDX-License-Identifier: GPL-2.0 */
#ifndef __ASM_SH_UACCESS_64_H
#define __ASM_SH_UACCESS_64_H
/*
* include/asm-sh/uaccess_64.h
*
* Copyright (C) 2000, 2001 Paolo Alberelli
* Copyright (C) 2003, 2004 Paul Mundt
*
* User space memory access functions
*
* Copyright (C) 1999 Niibe Yutaka
*
* Based on:
* MIPS implementation version 1.15 by
* Copyright (C) 1996, 1997, 1998 by Ralf Baechle
* and i386 version.
*/
#define __get_user_size(x,ptr,size,retval) \
do { \
retval = 0; \
x = 0; \
switch (size) { \
case 1: \
retval = __get_user_asm_b((void *)&x, \
(long)ptr); \
break; \
case 2: \
retval = __get_user_asm_w((void *)&x, \
(long)ptr); \
break; \
case 4: \
retval = __get_user_asm_l((void *)&x, \
(long)ptr); \
break; \
case 8: \
retval = __get_user_asm_q((void *)&x, \
(long)ptr); \
break; \
default: \
__get_user_unknown(); \
break; \
} \
} while (0)
extern long __get_user_asm_b(void *, long);
extern long __get_user_asm_w(void *, long);
extern long __get_user_asm_l(void *, long);
extern long __get_user_asm_q(void *, long);
extern void __get_user_unknown(void);
#define __put_user_size(x,ptr,size,retval) \
do { \
retval = 0; \
switch (size) { \
case 1: \
retval = __put_user_asm_b((void *)&x, \
(__force long)ptr); \
break; \
case 2: \
retval = __put_user_asm_w((void *)&x, \
(__force long)ptr); \
break; \
case 4: \
retval = __put_user_asm_l((void *)&x, \
(__force long)ptr); \
break; \
case 8: \
retval = __put_user_asm_q((void *)&x, \
(__force long)ptr); \
break; \
default: \
__put_user_unknown(); \
} \
} while (0)
extern long __put_user_asm_b(void *, long);
extern long __put_user_asm_w(void *, long);
extern long __put_user_asm_l(void *, long);
extern long __put_user_asm_q(void *, long);
extern void __put_user_unknown(void);
#endif /* __ASM_SH_UACCESS_64_H */
/* SPDX-License-Identifier: GPL-2.0 */ /* SPDX-License-Identifier: GPL-2.0 */
# ifdef CONFIG_SUPERH32 #include <asm/unistd_32.h>
# include <asm/unistd_32.h>
# else
# include <asm/unistd_64.h>
# endif
#define NR_syscalls __NR_syscalls #define NR_syscalls __NR_syscalls
......
...@@ -28,19 +28,12 @@ ...@@ -28,19 +28,12 @@
* to write an integer number of pages. * to write an integer number of pages.
*/ */
#if defined(__SH5__) || defined(CONFIG_CPU_SH5)
struct user_fpu_struct {
unsigned long fp_regs[32];
unsigned int fpscr;
};
#else
struct user_fpu_struct { struct user_fpu_struct {
unsigned long fp_regs[16]; unsigned long fp_regs[16];
unsigned long xfp_regs[16]; unsigned long xfp_regs[16];
unsigned long fpscr; unsigned long fpscr;
unsigned long fpul; unsigned long fpul;
}; };
#endif
struct user { struct user {
struct pt_regs regs; /* entire machine state */ struct pt_regs regs; /* entire machine state */
......
...@@ -10,8 +10,6 @@ ...@@ -10,8 +10,6 @@
# define MODULE_PROC_FAMILY "SH3LE " # define MODULE_PROC_FAMILY "SH3LE "
# elif defined CONFIG_CPU_SH4 # elif defined CONFIG_CPU_SH4
# define MODULE_PROC_FAMILY "SH4LE " # define MODULE_PROC_FAMILY "SH4LE "
# elif defined CONFIG_CPU_SH5
# define MODULE_PROC_FAMILY "SH5LE "
# else # else
# error unknown processor family # error unknown processor family
# endif # endif
...@@ -22,8 +20,6 @@ ...@@ -22,8 +20,6 @@
# define MODULE_PROC_FAMILY "SH3BE " # define MODULE_PROC_FAMILY "SH3BE "
# elif defined CONFIG_CPU_SH4 # elif defined CONFIG_CPU_SH4
# define MODULE_PROC_FAMILY "SH4BE " # define MODULE_PROC_FAMILY "SH4BE "
# elif defined CONFIG_CPU_SH5
# define MODULE_PROC_FAMILY "SH5BE "
# else # else
# error unknown processor family # error unknown processor family
# endif # endif
......
...@@ -15,12 +15,4 @@ ...@@ -15,12 +15,4 @@
#define DWARF_EH_FRAME #define DWARF_EH_FRAME
#endif #endif
#ifdef CONFIG_SUPERH64
#define EXTRA_TEXT \
*(.text64) \
*(.text..SHmedia32)
#else
#define EXTRA_TEXT
#endif
#endif /* __ASM_SH_VMLINUX_LDS_H */ #endif /* __ASM_SH_VMLINUX_LDS_H */
/* SPDX-License-Identifier: GPL-2.0 */
#ifndef __ASM_SH_CPU_SH5_ADDRSPACE_H
#define __ASM_SH_CPU_SH5_ADDRSPACE_H
#define PHYS_PERIPHERAL_BLOCK 0x09000000
#define PHYS_DMAC_BLOCK 0x0e000000
#define PHYS_PCI_BLOCK 0x60000000
#define PHYS_EMI_BLOCK 0xff000000
/* No segmentation.. */
#endif /* __ASM_SH_CPU_SH5_ADDRSPACE_H */
/* SPDX-License-Identifier: GPL-2.0 */
#ifndef __ASM_SH_CPU_SH5_CACHE_H
#define __ASM_SH_CPU_SH5_CACHE_H
/*
* include/asm-sh/cpu-sh5/cache.h
*
* Copyright (C) 2000, 2001 Paolo Alberelli
* Copyright (C) 2003, 2004 Paul Mundt
*/
#define L1_CACHE_SHIFT 5
/* Valid and Dirty bits */
#define SH_CACHE_VALID (1LL<<0)
#define SH_CACHE_UPDATED (1LL<<57)
/* Unimplemented compat bits.. */
#define SH_CACHE_COMBINED 0
#define SH_CACHE_ASSOC 0
/* Cache flags */
#define SH_CACHE_MODE_WT (1LL<<0)
#define SH_CACHE_MODE_WB (1LL<<1)
/*
* Control Registers.
*/
#define ICCR_BASE 0x01600000 /* Instruction Cache Control Register */
#define ICCR_REG0 0 /* Register 0 offset */
#define ICCR_REG1 1 /* Register 1 offset */
#define ICCR0 ICCR_BASE+ICCR_REG0
#define ICCR1 ICCR_BASE+ICCR_REG1
#define ICCR0_OFF 0x0 /* Set ICACHE off */
#define ICCR0_ON 0x1 /* Set ICACHE on */
#define ICCR0_ICI 0x2 /* Invalidate all in IC */
#define ICCR1_NOLOCK 0x0 /* Set No Locking */
#define OCCR_BASE 0x01E00000 /* Operand Cache Control Register */
#define OCCR_REG0 0 /* Register 0 offset */
#define OCCR_REG1 1 /* Register 1 offset */
#define OCCR0 OCCR_BASE+OCCR_REG0
#define OCCR1 OCCR_BASE+OCCR_REG1
#define OCCR0_OFF 0x0 /* Set OCACHE off */
#define OCCR0_ON 0x1 /* Set OCACHE on */
#define OCCR0_OCI 0x2 /* Invalidate all in OC */
#define OCCR0_WT 0x4 /* Set OCACHE in WT Mode */
#define OCCR0_WB 0x0 /* Set OCACHE in WB Mode */
#define OCCR1_NOLOCK 0x0 /* Set No Locking */
/*
* SH-5
* A bit of description here, for neff=32.
*
* |<--- tag (19 bits) --->|
* +-----------------------------+-----------------+------+----------+------+
* | | | ways |set index |offset|
* +-----------------------------+-----------------+------+----------+------+
* ^ 2 bits 8 bits 5 bits
* +- Bit 31
*
* Cacheline size is based on offset: 5 bits = 32 bytes per line
* A cache line is identified by a tag + set but OCACHETAG/ICACHETAG
* have a broader space for registers. These are outlined by
* CACHE_?C_*_STEP below.
*
*/
/* Instruction cache */
#define CACHE_IC_ADDRESS_ARRAY 0x01000000
/* Operand Cache */
#define CACHE_OC_ADDRESS_ARRAY 0x01800000
/* These declarations relate to cache 'synonyms' in the operand cache. A
'synonym' occurs where effective address bits overlap between those used for
indexing the cache sets and those passed to the MMU for translation. In the
case of SH5-101 & SH5-103, only bit 12 is affected for 4k pages. */
#define CACHE_OC_N_SYNBITS 1 /* Number of synonym bits */
#define CACHE_OC_SYN_SHIFT 12
/* Mask to select synonym bit(s) */
#define CACHE_OC_SYN_MASK (((1UL<<CACHE_OC_N_SYNBITS)-1)<<CACHE_OC_SYN_SHIFT)
/*
* Instruction cache can't be invalidated based on physical addresses.
* No Instruction Cache defines required, then.
*/
#endif /* __ASM_SH_CPU_SH5_CACHE_H */
/* SPDX-License-Identifier: GPL-2.0 */
#ifndef __ASM_SH_CPU_SH5_IRQ_H
#define __ASM_SH_CPU_SH5_IRQ_H
/*
* include/asm-sh/cpu-sh5/irq.h
*
* Copyright (C) 2000, 2001 Paolo Alberelli
*/
/*
* Encoded IRQs are not considered worth to be supported.
* Main reason is that there's no per-encoded-interrupt
* enable/disable mechanism (as there was in SH3/4).
* An all enabled/all disabled is worth only if there's
* a cascaded IC to disable/enable/ack on. Until such
* IC is available there's no such support.
*
* Presumably Encoded IRQs may use extra IRQs beyond 64,
* below. Some logic must be added to cope with IRQ_IRL?
* in an exclusive way.
*
* Priorities are set at Platform level, when IRQ_IRL0-3
* are set to 0 Encoding is allowed. Otherwise it's not
* allowed.
*/
/* Independent IRQs */
#define IRQ_IRL0 0
#define IRQ_IRL1 1
#define IRQ_IRL2 2
#define IRQ_IRL3 3
#define IRQ_INTA 4
#define IRQ_INTB 5
#define IRQ_INTC 6
#define IRQ_INTD 7
#define IRQ_SERR 12
#define IRQ_ERR 13
#define IRQ_PWR3 14
#define IRQ_PWR2 15
#define IRQ_PWR1 16
#define IRQ_PWR0 17
#define IRQ_DMTE0 18
#define IRQ_DMTE1 19
#define IRQ_DMTE2 20
#define IRQ_DMTE3 21
#define IRQ_DAERR 22
#define IRQ_TUNI0 32
#define IRQ_TUNI1 33
#define IRQ_TUNI2 34
#define IRQ_TICPI2 35
#define IRQ_ATI 36
#define IRQ_PRI 37
#define IRQ_CUI 38
#define IRQ_ERI 39
#define IRQ_RXI 40
#define IRQ_BRI 41
#define IRQ_TXI 42
#define IRQ_ITI 63
#define NR_INTC_IRQS 64
#ifdef CONFIG_SH_CAYMAN
#define NR_EXT_IRQS 32
#define START_EXT_IRQS 64
/* PCI bus 2 uses encoded external interrupts on the Cayman board */
#define IRQ_P2INTA (START_EXT_IRQS + (3*8) + 0)
#define IRQ_P2INTB (START_EXT_IRQS + (3*8) + 1)
#define IRQ_P2INTC (START_EXT_IRQS + (3*8) + 2)
#define IRQ_P2INTD (START_EXT_IRQS + (3*8) + 3)
#define I8042_KBD_IRQ (START_EXT_IRQS + 2)
#define I8042_AUX_IRQ (START_EXT_IRQS + 6)
#define IRQ_CFCARD (START_EXT_IRQS + 7)
#define IRQ_PCMCIA (0)
#else
#define NR_EXT_IRQS 0
#endif
/* Default IRQs, fixed */
#define TIMER_IRQ IRQ_TUNI0
#define RTC_IRQ IRQ_CUI
/* Default Priorities, Platform may choose differently */
#define NO_PRIORITY 0 /* Disabled */
#define TIMER_PRIORITY 2
#define RTC_PRIORITY TIMER_PRIORITY
#define SCIF_PRIORITY 3
#define INTD_PRIORITY 3
#define IRL3_PRIORITY 4
#define INTC_PRIORITY 6
#define IRL2_PRIORITY 7
#define INTB_PRIORITY 9
#define IRL1_PRIORITY 10
#define INTA_PRIORITY 12
#define IRL0_PRIORITY 13
#define TOP_PRIORITY 15
extern int intc_evt_to_irq[(0xE20/0x20)+1];
extern int platform_int_priority[NR_INTC_IRQS];
#endif /* __ASM_SH_CPU_SH5_IRQ_H */
/* SPDX-License-Identifier: GPL-2.0 */
#ifndef __ASM_SH_CPU_SH5_MMU_CONTEXT_H
#define __ASM_SH_CPU_SH5_MMU_CONTEXT_H
/* Common defines */
#define TLB_STEP 0x00000010
#define TLB_PTEH 0x00000000
#define TLB_PTEL 0x00000008
/* PTEH defines */
#define PTEH_ASID_SHIFT 2
#define PTEH_VALID 0x0000000000000001
#define PTEH_SHARED 0x0000000000000002
#define PTEH_MATCH_ASID 0x00000000000003ff
#ifndef __ASSEMBLY__
/* This has to be a common function because the next location to fill
* information is shared. */
extern void __do_tlb_refill(unsigned long address, unsigned long long is_text_not_data, pte_t *pte);
#endif /* __ASSEMBLY__ */
#endif /* __ASM_SH_CPU_SH5_MMU_CONTEXT_H */
/* SPDX-License-Identifier: GPL-2.0 */
#ifndef __ASM_SH_CPU_SH5_REGISTERS_H
#define __ASM_SH_CPU_SH5_REGISTERS_H
/*
* include/asm-sh/cpu-sh5/registers.h
*
* Copyright (C) 2000, 2001 Paolo Alberelli
* Copyright (C) 2004 Richard Curnow
*/
#ifdef __ASSEMBLY__
/* =====================================================================
**
** Section 1: acts on assembly sources pre-processed by GPP ( <source.S>).
** Assigns symbolic names to control & target registers.
*/
/*
* Define some useful aliases for control registers.
*/
#define SR cr0
#define SSR cr1
#define PSSR cr2
/* cr3 UNDEFINED */
#define INTEVT cr4
#define EXPEVT cr5
#define PEXPEVT cr6
#define TRA cr7
#define SPC cr8
#define PSPC cr9
#define RESVEC cr10
#define VBR cr11
/* cr12 UNDEFINED */
#define TEA cr13
/* cr14-cr15 UNDEFINED */
#define DCR cr16
#define KCR0 cr17
#define KCR1 cr18
/* cr19-cr31 UNDEFINED */
/* cr32-cr61 RESERVED */
#define CTC cr62
#define USR cr63
/*
* ABI dependent registers (general purpose set)
*/
#define RET r2
#define ARG1 r2
#define ARG2 r3
#define ARG3 r4
#define ARG4 r5
#define ARG5 r6
#define ARG6 r7
#define SP r15
#define LINK r18
#define ZERO r63
/*
* Status register defines: used only by assembly sources (and
* syntax independednt)
*/
#define SR_RESET_VAL 0x0000000050008000
#define SR_HARMLESS 0x00000000500080f0 /* Write ignores for most */
#define SR_ENABLE_FPU 0xffffffffffff7fff /* AND with this */
#if defined (CONFIG_SH64_SR_WATCH)
#define SR_ENABLE_MMU 0x0000000084000000 /* OR with this */
#else
#define SR_ENABLE_MMU 0x0000000080000000 /* OR with this */
#endif
#define SR_UNBLOCK_EXC 0xffffffffefffffff /* AND with this */
#define SR_BLOCK_EXC 0x0000000010000000 /* OR with this */
#else /* Not __ASSEMBLY__ syntax */
/*
** Stringify reg. name
*/
#define __str(x) #x
/* Stringify control register names for use in inline assembly */
#define __SR __str(SR)
#define __SSR __str(SSR)
#define __PSSR __str(PSSR)
#define __INTEVT __str(INTEVT)
#define __EXPEVT __str(EXPEVT)
#define __PEXPEVT __str(PEXPEVT)
#define __TRA __str(TRA)
#define __SPC __str(SPC)
#define __PSPC __str(PSPC)
#define __RESVEC __str(RESVEC)
#define __VBR __str(VBR)
#define __TEA __str(TEA)
#define __DCR __str(DCR)
#define __KCR0 __str(KCR0)
#define __KCR1 __str(KCR1)
#define __CTC __str(CTC)
#define __USR __str(USR)
#endif /* __ASSEMBLY__ */
#endif /* __ASM_SH_CPU_SH5_REGISTERS_H */
/* SPDX-License-Identifier: GPL-2.0 */
#ifndef __ASM_SH_CPU_SH5_RTC_H
#define __ASM_SH_CPU_SH5_RTC_H
#define rtc_reg_size sizeof(u32)
#define RTC_BIT_INVERTED 0 /* The SH-5 RTC is surprisingly sane! */
#define RTC_DEF_CAPABILITIES RTC_CAP_4_DIGIT_YEAR
#endif /* __ASM_SH_CPU_SH5_RTC_H */
/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ /* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
#ifndef __KERNEL__ #include <asm/posix_types_32.h>
# ifdef __SH5__
# include <asm/posix_types_64.h>
# else
# include <asm/posix_types_32.h>
# endif
#endif /* __KERNEL__ */
/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
#ifndef __ASM_SH_POSIX_TYPES_64_H
#define __ASM_SH_POSIX_TYPES_64_H
typedef unsigned short __kernel_mode_t;
#define __kernel_mode_t __kernel_mode_t
typedef unsigned short __kernel_ipc_pid_t;
#define __kernel_ipc_pid_t __kernel_ipc_pid_t
typedef unsigned short __kernel_uid_t;
#define __kernel_uid_t __kernel_uid_t
typedef unsigned short __kernel_gid_t;
#define __kernel_gid_t __kernel_gid_t
typedef long unsigned int __kernel_size_t;
#define __kernel_size_t __kernel_size_t
typedef int __kernel_ssize_t;
#define __kernel_ssize_t __kernel_ssize_t
typedef int __kernel_ptrdiff_t;
#define __kernel_ptrdiff_t __kernel_ptrdiff_t
typedef unsigned short __kernel_old_uid_t;
#define __kernel_old_uid_t __kernel_old_uid_t
typedef unsigned short __kernel_old_gid_t;
#define __kernel_old_gid_t __kernel_old_gid_t
typedef unsigned short __kernel_old_dev_t;
#define __kernel_old_dev_t __kernel_old_dev_t
#include <asm-generic/posix_types.h>
#endif /* __ASM_SH_POSIX_TYPES_64_H */
...@@ -25,11 +25,6 @@ ...@@ -25,11 +25,6 @@
#define PT_DATA_ADDR 248 /* &(struct user)->start_data */ #define PT_DATA_ADDR 248 /* &(struct user)->start_data */
#define PT_TEXT_LEN 252 #define PT_TEXT_LEN 252
#if defined(__SH5__) || defined(CONFIG_CPU_SH5)
#include <asm/ptrace_64.h>
#else
#include <asm/ptrace_32.h> #include <asm/ptrace_32.h>
#endif
#endif /* _UAPI__ASM_SH_PTRACE_H */ #endif /* _UAPI__ASM_SH_PTRACE_H */
/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
#ifndef _UAPI__ASM_SH_PTRACE_64_H
#define _UAPI__ASM_SH_PTRACE_64_H
struct pt_regs {
unsigned long long pc;
unsigned long long sr;
long long syscall_nr;
unsigned long long regs[63];
unsigned long long tregs[8];
unsigned long long pad[2];
};
#endif /* _UAPI__ASM_SH_PTRACE_64_H */
...@@ -5,18 +5,6 @@ ...@@ -5,18 +5,6 @@
struct sigcontext { struct sigcontext {
unsigned long oldmask; unsigned long oldmask;
#if defined(__SH5__) || defined(CONFIG_CPU_SH5)
/* CPU registers */
unsigned long long sc_regs[63];
unsigned long long sc_tregs[8];
unsigned long long sc_pc;
unsigned long long sc_sr;
/* FPU registers */
unsigned long long sc_fpregs[32];
unsigned int sc_fpscr;
unsigned int sc_fpvalid;
#else
/* CPU registers */ /* CPU registers */
unsigned long sc_regs[16]; unsigned long sc_regs[16];
unsigned long sc_pc; unsigned long sc_pc;
...@@ -32,7 +20,6 @@ struct sigcontext { ...@@ -32,7 +20,6 @@ struct sigcontext {
unsigned int sc_fpscr; unsigned int sc_fpscr;
unsigned int sc_fpul; unsigned int sc_fpul;
unsigned int sc_ownedfp; unsigned int sc_ownedfp;
#endif
}; };
#endif /* __ASM_SH_SIGCONTEXT_H */ #endif /* __ASM_SH_SIGCONTEXT_H */
...@@ -16,66 +16,6 @@ struct __old_kernel_stat { ...@@ -16,66 +16,6 @@ struct __old_kernel_stat {
unsigned long st_ctime; unsigned long st_ctime;
}; };
#if defined(__SH5__) || defined(CONFIG_CPU_SH5)
struct stat {
unsigned short st_dev;
unsigned short __pad1;
unsigned long st_ino;
unsigned short st_mode;
unsigned short st_nlink;
unsigned short st_uid;
unsigned short st_gid;
unsigned short st_rdev;
unsigned short __pad2;
unsigned long st_size;
unsigned long st_blksize;
unsigned long st_blocks;
unsigned long st_atime;
unsigned long st_atime_nsec;
unsigned long st_mtime;
unsigned long st_mtime_nsec;
unsigned long st_ctime;
unsigned long st_ctime_nsec;
unsigned long __unused4;
unsigned long __unused5;
};
/* This matches struct stat64 in glibc2.1, hence the absolutely
* insane amounts of padding around dev_t's.
*/
struct stat64 {
unsigned short st_dev;
unsigned char __pad0[10];
unsigned long st_ino;
unsigned int st_mode;
unsigned int st_nlink;
unsigned long st_uid;
unsigned long st_gid;
unsigned short st_rdev;
unsigned char __pad3[10];
long long st_size;
unsigned long st_blksize;
unsigned long st_blocks; /* Number 512-byte blocks allocated. */
unsigned long __pad4; /* future possible st_blocks high bits */
unsigned long st_atime;
unsigned long st_atime_nsec;
unsigned long st_mtime;
unsigned long st_mtime_nsec;
unsigned long st_ctime;
unsigned long st_ctime_nsec; /* will be high 32 bits of ctime someday */
unsigned long __unused1;
unsigned long __unused2;
};
#else
struct stat { struct stat {
unsigned long st_dev; unsigned long st_dev;
unsigned long st_ino; unsigned long st_ino;
...@@ -134,6 +74,5 @@ struct stat64 { ...@@ -134,6 +74,5 @@ struct stat64 {
}; };
#define STAT_HAVE_NSEC 1 #define STAT_HAVE_NSEC 1
#endif
#endif /* __ASM_SH_STAT_H */ #endif /* __ASM_SH_STAT_H */
...@@ -13,14 +13,9 @@ ...@@ -13,14 +13,9 @@
static inline __attribute_const__ __u32 __arch_swab32(__u32 x) static inline __attribute_const__ __u32 __arch_swab32(__u32 x)
{ {
__asm__( __asm__(
#ifdef __SH5__
"byterev %1, %0\n\t"
"shari %0, 32, %0"
#else
"swap.b %1, %0\n\t" "swap.b %1, %0\n\t"
"swap.w %0, %0\n\t" "swap.w %0, %0\n\t"
"swap.b %0, %0" "swap.b %0, %0"
#endif
: "=r" (x) : "=r" (x)
: "r" (x)); : "r" (x));
...@@ -31,12 +26,7 @@ static inline __attribute_const__ __u32 __arch_swab32(__u32 x) ...@@ -31,12 +26,7 @@ static inline __attribute_const__ __u32 __arch_swab32(__u32 x)
static inline __attribute_const__ __u16 __arch_swab16(__u16 x) static inline __attribute_const__ __u16 __arch_swab16(__u16 x)
{ {
__asm__( __asm__(
#ifdef __SH5__
"byterev %1, %0\n\t"
"shari %0, 32, %0"
#else
"swap.b %1, %0" "swap.b %1, %0"
#endif
: "=r" (x) : "=r" (x)
: "r" (x)); : "r" (x));
......
/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ /* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
#ifndef __KERNEL__ #include <asm/unistd_32.h>
# ifdef __SH5__
# include <asm/unistd_64.h>
# else
# include <asm/unistd_32.h>
# endif
#endif
This diff is collapsed.
...@@ -3,7 +3,7 @@ ...@@ -3,7 +3,7 @@
# Makefile for the Linux/SuperH kernel. # Makefile for the Linux/SuperH kernel.
# #
extra-y := head_$(BITS).o vmlinux.lds extra-y := head_32.o vmlinux.lds
ifdef CONFIG_FUNCTION_TRACER ifdef CONFIG_FUNCTION_TRACER
# Do not profile debug and lowlevel utilities # Do not profile debug and lowlevel utilities
...@@ -13,26 +13,26 @@ endif ...@@ -13,26 +13,26 @@ endif
CFLAGS_REMOVE_return_address.o = -pg CFLAGS_REMOVE_return_address.o = -pg
obj-y := debugtraps.o dumpstack.o \ obj-y := debugtraps.o dumpstack.o \
idle.o io.o irq.o irq_$(BITS).o kdebugfs.o \ idle.o io.o irq.o irq_32.o kdebugfs.o \
machvec.o nmi_debug.o process.o \ machvec.o nmi_debug.o process.o \
process_$(BITS).o ptrace.o ptrace_$(BITS).o \ process_32.o ptrace.o ptrace_32.o \
reboot.o return_address.o \ reboot.o return_address.o \
setup.o signal_$(BITS).o sys_sh.o \ setup.o signal_32.o sys_sh.o \
syscalls_$(BITS).o time.o topology.o traps.o \ syscalls_32.o time.o topology.o traps.o \
traps_$(BITS).o unwinder.o traps_32.o unwinder.o
ifndef CONFIG_GENERIC_IOMAP ifndef CONFIG_GENERIC_IOMAP
obj-y += iomap.o obj-y += iomap.o
obj-$(CONFIG_HAS_IOPORT_MAP) += ioport.o obj-$(CONFIG_HAS_IOPORT_MAP) += ioport.o
endif endif
obj-$(CONFIG_SUPERH32) += sys_sh32.o obj-y += sys_sh32.o
obj-y += cpu/ obj-y += cpu/
obj-$(CONFIG_VSYSCALL) += vsyscall/ obj-$(CONFIG_VSYSCALL) += vsyscall/
obj-$(CONFIG_SMP) += smp.o obj-$(CONFIG_SMP) += smp.o
obj-$(CONFIG_SH_STANDARD_BIOS) += sh_bios.o obj-$(CONFIG_SH_STANDARD_BIOS) += sh_bios.o
obj-$(CONFIG_KGDB) += kgdb.o obj-$(CONFIG_KGDB) += kgdb.o
obj-$(CONFIG_MODULES) += sh_ksyms_$(BITS).o module.o obj-$(CONFIG_MODULES) += sh_ksyms_32.o module.o
obj-$(CONFIG_KEXEC) += machine_kexec.o relocate_kernel.o obj-$(CONFIG_KEXEC) += machine_kexec.o relocate_kernel.o
obj-$(CONFIG_CRASH_DUMP) += crash_dump.o obj-$(CONFIG_CRASH_DUMP) += crash_dump.o
obj-$(CONFIG_STACKTRACE) += stacktrace.o obj-$(CONFIG_STACKTRACE) += stacktrace.o
......
...@@ -7,7 +7,6 @@ obj-$(CONFIG_CPU_SH2) = sh2/ ...@@ -7,7 +7,6 @@ obj-$(CONFIG_CPU_SH2) = sh2/
obj-$(CONFIG_CPU_SH2A) = sh2a/ obj-$(CONFIG_CPU_SH2A) = sh2a/
obj-$(CONFIG_CPU_SH3) = sh3/ obj-$(CONFIG_CPU_SH3) = sh3/
obj-$(CONFIG_CPU_SH4) = sh4/ obj-$(CONFIG_CPU_SH4) = sh4/
obj-$(CONFIG_CPU_SH5) = sh5/
# Special cases for family ancestry. # Special cases for family ancestry.
......
...@@ -103,7 +103,7 @@ void __attribute__ ((weak)) l2_cache_init(void) ...@@ -103,7 +103,7 @@ void __attribute__ ((weak)) l2_cache_init(void)
/* /*
* Generic first-level cache init * Generic first-level cache init
*/ */
#if defined(CONFIG_SUPERH32) && !defined(CONFIG_CPU_J2) #if !defined(CONFIG_CPU_J2)
static void cache_init(void) static void cache_init(void)
{ {
unsigned long ccr, flags; unsigned long ccr, flags;
......
...@@ -2,6 +2,5 @@ ...@@ -2,6 +2,5 @@
# #
# Makefile for the Linux/SuperH CPU-specific IRQ handlers. # Makefile for the Linux/SuperH CPU-specific IRQ handlers.
# #
obj-$(CONFIG_SUPERH32) += imask.o obj-y += imask.o
obj-$(CONFIG_CPU_SH5) += intc-sh5.o
obj-$(CONFIG_CPU_HAS_IPR_IRQ) += ipr.o obj-$(CONFIG_CPU_HAS_IPR_IRQ) += ipr.o
// SPDX-License-Identifier: GPL-2.0
/*
* arch/sh/kernel/cpu/irq/intc-sh5.c
*
* Interrupt Controller support for SH5 INTC.
*
* Copyright (C) 2000, 2001 Paolo Alberelli
* Copyright (C) 2003 Paul Mundt
*
* Per-interrupt selective. IRLM=0 (Fixed priority) is not
* supported being useless without a cascaded interrupt
* controller.
*/
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <linux/io.h>
#include <linux/kernel.h>
#include <linux/bitops.h>
#include <cpu/irq.h>
#include <asm/page.h>
/*
* Maybe the generic Peripheral block could move to a more
* generic include file. INTC Block will be defined here
* and only here to make INTC self-contained in a single
* file.
*/
#define INTC_BLOCK_OFFSET 0x01000000
/* Base */
#define INTC_BASE PHYS_PERIPHERAL_BLOCK + \
INTC_BLOCK_OFFSET
/* Address */
#define INTC_ICR_SET (intc_virt + 0x0)
#define INTC_ICR_CLEAR (intc_virt + 0x8)
#define INTC_INTPRI_0 (intc_virt + 0x10)
#define INTC_INTSRC_0 (intc_virt + 0x50)
#define INTC_INTSRC_1 (intc_virt + 0x58)
#define INTC_INTREQ_0 (intc_virt + 0x60)
#define INTC_INTREQ_1 (intc_virt + 0x68)
#define INTC_INTENB_0 (intc_virt + 0x70)
#define INTC_INTENB_1 (intc_virt + 0x78)
#define INTC_INTDSB_0 (intc_virt + 0x80)
#define INTC_INTDSB_1 (intc_virt + 0x88)
#define INTC_ICR_IRLM 0x1
#define INTC_INTPRI_PREGS 8 /* 8 Priority Registers */
#define INTC_INTPRI_PPREG 8 /* 8 Priorities per Register */
/*
* Mapper between the vector ordinal and the IRQ number
* passed to kernel/device drivers.
*/
int intc_evt_to_irq[(0xE20/0x20)+1] = {
-1, -1, -1, -1, -1, -1, -1, -1, /* 0x000 - 0x0E0 */
-1, -1, -1, -1, -1, -1, -1, -1, /* 0x100 - 0x1E0 */
0, 0, 0, 0, 0, 1, 0, 0, /* 0x200 - 0x2E0 */
2, 0, 0, 3, 0, 0, 0, -1, /* 0x300 - 0x3E0 */
32, 33, 34, 35, 36, 37, 38, -1, /* 0x400 - 0x4E0 */
-1, -1, -1, 63, -1, -1, -1, -1, /* 0x500 - 0x5E0 */
-1, -1, 18, 19, 20, 21, 22, -1, /* 0x600 - 0x6E0 */
39, 40, 41, 42, -1, -1, -1, -1, /* 0x700 - 0x7E0 */
4, 5, 6, 7, -1, -1, -1, -1, /* 0x800 - 0x8E0 */
-1, -1, -1, -1, -1, -1, -1, -1, /* 0x900 - 0x9E0 */
12, 13, 14, 15, 16, 17, -1, -1, /* 0xA00 - 0xAE0 */
-1, -1, -1, -1, -1, -1, -1, -1, /* 0xB00 - 0xBE0 */
-1, -1, -1, -1, -1, -1, -1, -1, /* 0xC00 - 0xCE0 */
-1, -1, -1, -1, -1, -1, -1, -1, /* 0xD00 - 0xDE0 */
-1, -1 /* 0xE00 - 0xE20 */
};
static unsigned long intc_virt;
static int irlm; /* IRL mode */
static void enable_intc_irq(struct irq_data *data)
{
unsigned int irq = data->irq;
unsigned long reg;
unsigned long bitmask;
if ((irq <= IRQ_IRL3) && (irlm == NO_PRIORITY))
printk("Trying to use straight IRL0-3 with an encoding platform.\n");
if (irq < 32) {
reg = INTC_INTENB_0;
bitmask = 1 << irq;
} else {
reg = INTC_INTENB_1;
bitmask = 1 << (irq - 32);
}
__raw_writel(bitmask, reg);
}
static void disable_intc_irq(struct irq_data *data)
{
unsigned int irq = data->irq;
unsigned long reg;
unsigned long bitmask;
if (irq < 32) {
reg = INTC_INTDSB_0;
bitmask = 1 << irq;
} else {
reg = INTC_INTDSB_1;
bitmask = 1 << (irq - 32);
}
__raw_writel(bitmask, reg);
}
static struct irq_chip intc_irq_type = {
.name = "INTC",
.irq_enable = enable_intc_irq,
.irq_disable = disable_intc_irq,
};
void __init plat_irq_setup(void)
{
unsigned long long __dummy0, __dummy1=~0x00000000100000f0;
unsigned long reg;
int i;
intc_virt = (unsigned long)ioremap(INTC_BASE, 1024);
if (!intc_virt) {
panic("Unable to remap INTC\n");
}
/* Set default: per-line enable/disable, priority driven ack/eoi */
for (i = 0; i < NR_INTC_IRQS; i++)
irq_set_chip_and_handler(i, &intc_irq_type, handle_level_irq);
/* Disable all interrupts and set all priorities to 0 to avoid trouble */
__raw_writel(-1, INTC_INTDSB_0);
__raw_writel(-1, INTC_INTDSB_1);
for (reg = INTC_INTPRI_0, i = 0; i < INTC_INTPRI_PREGS; i++, reg += 8)
__raw_writel( NO_PRIORITY, reg);
#ifdef CONFIG_SH_CAYMAN
{
unsigned long data;
/* Set IRLM */
/* If all the priorities are set to 'no priority', then
* assume we are using encoded mode.
*/
irlm = platform_int_priority[IRQ_IRL0] +
platform_int_priority[IRQ_IRL1] +
platform_int_priority[IRQ_IRL2] +
platform_int_priority[IRQ_IRL3];
if (irlm == NO_PRIORITY) {
/* IRLM = 0 */
reg = INTC_ICR_CLEAR;
i = IRQ_INTA;
printk("Trying to use encoded IRL0-3. IRLs unsupported.\n");
} else {
/* IRLM = 1 */
reg = INTC_ICR_SET;
i = IRQ_IRL0;
}
__raw_writel(INTC_ICR_IRLM, reg);
/* Set interrupt priorities according to platform description */
for (data = 0, reg = INTC_INTPRI_0; i < NR_INTC_IRQS; i++) {
data |= platform_int_priority[i] <<
((i % INTC_INTPRI_PPREG) * 4);
if ((i % INTC_INTPRI_PPREG) == (INTC_INTPRI_PPREG - 1)) {
/* Upon the 7th, set Priority Register */
__raw_writel(data, reg);
data = 0;
reg += 8;
}
}
}
#endif
/*
* And now let interrupts come in.
* sti() is not enough, we need to
* lower priority, too.
*/
__asm__ __volatile__("getcon " __SR ", %0\n\t"
"and %0, %1, %0\n\t"
"putcon %0, " __SR "\n\t"
: "=&r" (__dummy0)
: "r" (__dummy1));
}
...@@ -24,7 +24,6 @@ static const char *cpu_name[] = { ...@@ -24,7 +24,6 @@ static const char *cpu_name[] = {
[CPU_SH7343] = "SH7343", [CPU_SH7785] = "SH7785", [CPU_SH7343] = "SH7343", [CPU_SH7785] = "SH7785",
[CPU_SH7786] = "SH7786", [CPU_SH7757] = "SH7757", [CPU_SH7786] = "SH7786", [CPU_SH7757] = "SH7757",
[CPU_SH7722] = "SH7722", [CPU_SHX3] = "SH-X3", [CPU_SH7722] = "SH7722", [CPU_SHX3] = "SH-X3",
[CPU_SH5_101] = "SH5-101", [CPU_SH5_103] = "SH5-103",
[CPU_MXG] = "MX-G", [CPU_SH7723] = "SH7723", [CPU_MXG] = "MX-G", [CPU_SH7723] = "SH7723",
[CPU_SH7366] = "SH7366", [CPU_SH7724] = "SH7724", [CPU_SH7366] = "SH7366", [CPU_SH7724] = "SH7724",
[CPU_SH7372] = "SH7372", [CPU_SH7734] = "SH7734", [CPU_SH7372] = "SH7372", [CPU_SH7734] = "SH7734",
......
# SPDX-License-Identifier: GPL-2.0
#
# Makefile for the Linux/SuperH SH-5 backends.
#
obj-y := entry.o probe.o switchto.o
obj-$(CONFIG_SH_FPU) += fpu.o
obj-$(CONFIG_KALLSYMS) += unwind.o
# CPU subtype setup
obj-$(CONFIG_CPU_SH5) += setup-sh5.o
# Primary on-chip clocks (common)
clock-$(CONFIG_CPU_SH5) := clock-sh5.o
obj-y += $(clock-y)
// SPDX-License-Identifier: GPL-2.0
/*
* arch/sh/kernel/cpu/sh5/clock-sh5.c
*
* SH-5 support for the clock framework
*
* Copyright (C) 2008 Paul Mundt
*/
#include <linux/init.h>
#include <linux/kernel.h>
#include <asm/clock.h>
#include <asm/io.h>
static int ifc_table[] = { 2, 4, 6, 8, 10, 12, 16, 24 };
/* Clock, Power and Reset Controller */
#define CPRC_BLOCK_OFF 0x01010000
#define CPRC_BASE (PHYS_PERIPHERAL_BLOCK + CPRC_BLOCK_OFF)
static unsigned long cprc_base;
static void master_clk_init(struct clk *clk)
{
int idx = (__raw_readl(cprc_base + 0x00) >> 6) & 0x0007;
clk->rate *= ifc_table[idx];
}
static struct sh_clk_ops sh5_master_clk_ops = {
.init = master_clk_init,
};
static unsigned long module_clk_recalc(struct clk *clk)
{
int idx = (__raw_readw(cprc_base) >> 12) & 0x0007;
return clk->parent->rate / ifc_table[idx];
}
static struct sh_clk_ops sh5_module_clk_ops = {
.recalc = module_clk_recalc,
};
static unsigned long bus_clk_recalc(struct clk *clk)
{
int idx = (__raw_readw(cprc_base) >> 3) & 0x0007;
return clk->parent->rate / ifc_table[idx];
}
static struct sh_clk_ops sh5_bus_clk_ops = {
.recalc = bus_clk_recalc,
};
static unsigned long cpu_clk_recalc(struct clk *clk)
{
int idx = (__raw_readw(cprc_base) & 0x0007);
return clk->parent->rate / ifc_table[idx];
}
static struct sh_clk_ops sh5_cpu_clk_ops = {
.recalc = cpu_clk_recalc,
};
static struct sh_clk_ops *sh5_clk_ops[] = {
&sh5_master_clk_ops,
&sh5_module_clk_ops,
&sh5_bus_clk_ops,
&sh5_cpu_clk_ops,
};
void __init arch_init_clk_ops(struct sh_clk_ops **ops, int idx)
{
cprc_base = (unsigned long)ioremap(CPRC_BASE, 1024);
BUG_ON(!cprc_base);
if (idx < ARRAY_SIZE(sh5_clk_ops))
*ops = sh5_clk_ops[idx];
}
This diff is collapsed.
// SPDX-License-Identifier: GPL-2.0
/*
* arch/sh/kernel/cpu/sh5/fpu.c
*
* Copyright (C) 2001 Manuela Cirronis, Paolo Alberelli
* Copyright (C) 2002 STMicroelectronics Limited
* Author : Stuart Menefy
*
* Started from SH4 version:
* Copyright (C) 1999, 2000 Kaz Kojima & Niibe Yutaka
*/
#include <linux/sched.h>
#include <linux/signal.h>
#include <asm/processor.h>
void save_fpu(struct task_struct *tsk)
{
asm volatile("fst.p %0, (0*8), fp0\n\t"
"fst.p %0, (1*8), fp2\n\t"
"fst.p %0, (2*8), fp4\n\t"
"fst.p %0, (3*8), fp6\n\t"
"fst.p %0, (4*8), fp8\n\t"
"fst.p %0, (5*8), fp10\n\t"
"fst.p %0, (6*8), fp12\n\t"
"fst.p %0, (7*8), fp14\n\t"
"fst.p %0, (8*8), fp16\n\t"
"fst.p %0, (9*8), fp18\n\t"
"fst.p %0, (10*8), fp20\n\t"
"fst.p %0, (11*8), fp22\n\t"
"fst.p %0, (12*8), fp24\n\t"
"fst.p %0, (13*8), fp26\n\t"
"fst.p %0, (14*8), fp28\n\t"
"fst.p %0, (15*8), fp30\n\t"
"fst.p %0, (16*8), fp32\n\t"
"fst.p %0, (17*8), fp34\n\t"
"fst.p %0, (18*8), fp36\n\t"
"fst.p %0, (19*8), fp38\n\t"
"fst.p %0, (20*8), fp40\n\t"
"fst.p %0, (21*8), fp42\n\t"
"fst.p %0, (22*8), fp44\n\t"
"fst.p %0, (23*8), fp46\n\t"
"fst.p %0, (24*8), fp48\n\t"
"fst.p %0, (25*8), fp50\n\t"
"fst.p %0, (26*8), fp52\n\t"
"fst.p %0, (27*8), fp54\n\t"
"fst.p %0, (28*8), fp56\n\t"
"fst.p %0, (29*8), fp58\n\t"
"fst.p %0, (30*8), fp60\n\t"
"fst.p %0, (31*8), fp62\n\t"
"fgetscr fr63\n\t"
"fst.s %0, (32*8), fr63\n\t"
: /* no output */
: "r" (&tsk->thread.xstate->hardfpu)
: "memory");
}
void restore_fpu(struct task_struct *tsk)
{
asm volatile("fld.p %0, (0*8), fp0\n\t"
"fld.p %0, (1*8), fp2\n\t"
"fld.p %0, (2*8), fp4\n\t"
"fld.p %0, (3*8), fp6\n\t"
"fld.p %0, (4*8), fp8\n\t"
"fld.p %0, (5*8), fp10\n\t"
"fld.p %0, (6*8), fp12\n\t"
"fld.p %0, (7*8), fp14\n\t"
"fld.p %0, (8*8), fp16\n\t"
"fld.p %0, (9*8), fp18\n\t"
"fld.p %0, (10*8), fp20\n\t"
"fld.p %0, (11*8), fp22\n\t"
"fld.p %0, (12*8), fp24\n\t"
"fld.p %0, (13*8), fp26\n\t"
"fld.p %0, (14*8), fp28\n\t"
"fld.p %0, (15*8), fp30\n\t"
"fld.p %0, (16*8), fp32\n\t"
"fld.p %0, (17*8), fp34\n\t"
"fld.p %0, (18*8), fp36\n\t"
"fld.p %0, (19*8), fp38\n\t"
"fld.p %0, (20*8), fp40\n\t"
"fld.p %0, (21*8), fp42\n\t"
"fld.p %0, (22*8), fp44\n\t"
"fld.p %0, (23*8), fp46\n\t"
"fld.p %0, (24*8), fp48\n\t"
"fld.p %0, (25*8), fp50\n\t"
"fld.p %0, (26*8), fp52\n\t"
"fld.p %0, (27*8), fp54\n\t"
"fld.p %0, (28*8), fp56\n\t"
"fld.p %0, (29*8), fp58\n\t"
"fld.p %0, (30*8), fp60\n\t"
"fld.s %0, (32*8), fr63\n\t"
"fputscr fr63\n\t"
"fld.p %0, (31*8), fp62\n\t"
: /* no output */
: "r" (&tsk->thread.xstate->hardfpu)
: "memory");
}
asmlinkage void do_fpu_error(unsigned long ex, struct pt_regs *regs)
{
regs->pc += 4;
force_sig(SIGFPE);
}
// SPDX-License-Identifier: GPL-2.0
/*
* arch/sh/kernel/cpu/sh5/probe.c
*
* CPU Subtype Probing for SH-5.
*
* Copyright (C) 2000, 2001 Paolo Alberelli
* Copyright (C) 2003 - 2007 Paul Mundt
*/
#include <linux/init.h>
#include <linux/io.h>
#include <linux/string.h>
#include <asm/processor.h>
#include <asm/cache.h>
#include <asm/tlb.h>
void cpu_probe(void)
{
unsigned long long cir;
/*
* Do peeks in real mode to avoid having to set up a mapping for
* the WPC registers. On SH5-101 cut2, such a mapping would be
* exposed to an address translation erratum which would make it
* hard to set up correctly.
*/
cir = peek_real_address_q(0x0d000008);
if ((cir & 0xffff) == 0x5103)
boot_cpu_data.type = CPU_SH5_103;
else if (((cir >> 32) & 0xffff) == 0x51e2)
/* CPU.VCR aliased at CIR address on SH5-101 */
boot_cpu_data.type = CPU_SH5_101;
boot_cpu_data.family = CPU_FAMILY_SH5;
/*
* First, setup some sane values for the I-cache.
*/
boot_cpu_data.icache.ways = 4;
boot_cpu_data.icache.sets = 256;
boot_cpu_data.icache.linesz = L1_CACHE_BYTES;
boot_cpu_data.icache.way_incr = (1 << 13);
boot_cpu_data.icache.entry_shift = 5;
boot_cpu_data.icache.way_size = boot_cpu_data.icache.sets *
boot_cpu_data.icache.linesz;
boot_cpu_data.icache.entry_mask = 0x1fe0;
boot_cpu_data.icache.flags = 0;
/*
* Next, setup some sane values for the D-cache.
*
* On the SH5, these are pretty consistent with the I-cache settings,
* so we just copy over the existing definitions.. these can be fixed
* up later, especially if we add runtime CPU probing.
*
* Though in the meantime it saves us from having to duplicate all of
* the above definitions..
*/
boot_cpu_data.dcache = boot_cpu_data.icache;
/*
* Setup any cache-related flags here
*/
#if defined(CONFIG_CACHE_WRITETHROUGH)
set_bit(SH_CACHE_MODE_WT, &(boot_cpu_data.dcache.flags));
#elif defined(CONFIG_CACHE_WRITEBACK)
set_bit(SH_CACHE_MODE_WB, &(boot_cpu_data.dcache.flags));
#endif
/* Setup some I/D TLB defaults */
sh64_tlb_init();
}
// SPDX-License-Identifier: GPL-2.0
/*
* SH5-101/SH5-103 CPU Setup
*
* Copyright (C) 2009 Paul Mundt
*/
#include <linux/platform_device.h>
#include <linux/init.h>
#include <linux/serial.h>
#include <linux/serial_sci.h>
#include <linux/io.h>
#include <linux/mm.h>
#include <linux/sh_timer.h>
#include <asm/addrspace.h>
#include <asm/platform_early.h>
static struct plat_sci_port scif0_platform_data = {
.flags = UPF_IOREMAP,
.scscr = SCSCR_REIE,
.type = PORT_SCIF,
};
static struct resource scif0_resources[] = {
DEFINE_RES_MEM(PHYS_PERIPHERAL_BLOCK + 0x01030000, 0x100),
DEFINE_RES_IRQ(39),
DEFINE_RES_IRQ(40),
DEFINE_RES_IRQ(42),
};
static struct platform_device scif0_device = {
.name = "sh-sci",
.id = 0,
.resource = scif0_resources,
.num_resources = ARRAY_SIZE(scif0_resources),
.dev = {
.platform_data = &scif0_platform_data,
},
};
static struct resource rtc_resources[] = {
[0] = {
.start = PHYS_PERIPHERAL_BLOCK + 0x01040000,
.end = PHYS_PERIPHERAL_BLOCK + 0x01040000 + 0x58 - 1,
.flags = IORESOURCE_IO,
},
[1] = {
/* Period IRQ */
.start = IRQ_PRI,
.flags = IORESOURCE_IRQ,
},
[2] = {
/* Carry IRQ */
.start = IRQ_CUI,
.flags = IORESOURCE_IRQ,
},
[3] = {
/* Alarm IRQ */
.start = IRQ_ATI,
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device rtc_device = {
.name = "sh-rtc",
.id = -1,
.num_resources = ARRAY_SIZE(rtc_resources),
.resource = rtc_resources,
};
#define TMU_BLOCK_OFF 0x01020000
#define TMU_BASE PHYS_PERIPHERAL_BLOCK + TMU_BLOCK_OFF
static struct sh_timer_config tmu0_platform_data = {
.channels_mask = 7,
};
static struct resource tmu0_resources[] = {
DEFINE_RES_MEM(TMU_BASE, 0x30),
DEFINE_RES_IRQ(IRQ_TUNI0),
DEFINE_RES_IRQ(IRQ_TUNI1),
DEFINE_RES_IRQ(IRQ_TUNI2),
};
static struct platform_device tmu0_device = {
.name = "sh-tmu",
.id = 0,
.dev = {
.platform_data = &tmu0_platform_data,
},
.resource = tmu0_resources,
.num_resources = ARRAY_SIZE(tmu0_resources),
};
static struct platform_device *sh5_early_devices[] __initdata = {
&scif0_device,
&tmu0_device,
};
static struct platform_device *sh5_devices[] __initdata = {
&rtc_device,
};
static int __init sh5_devices_setup(void)
{
int ret;
ret = platform_add_devices(sh5_early_devices,
ARRAY_SIZE(sh5_early_devices));
if (unlikely(ret != 0))
return ret;
return platform_add_devices(sh5_devices,
ARRAY_SIZE(sh5_devices));
}
arch_initcall(sh5_devices_setup);
void __init plat_early_device_setup(void)
{
sh_early_platform_add_devices(sh5_early_devices,
ARRAY_SIZE(sh5_early_devices));
}
/* SPDX-License-Identifier: GPL-2.0
*
* arch/sh/kernel/cpu/sh5/switchto.S
*
* sh64 context switch
*
* Copyright (C) 2004 Richard Curnow
*/
.section .text..SHmedia32,"ax"
.little
.balign 32
.type sh64_switch_to,@function
.global sh64_switch_to
.global __sh64_switch_to_end
sh64_switch_to:
/* Incoming args
r2 - prev
r3 - &prev->thread
r4 - next
r5 - &next->thread
Outgoing results
r2 - last (=prev) : this just stays in r2 throughout
Want to create a full (struct pt_regs) on the stack to allow backtracing
functions to work. However, we only need to populate the callee-save
register slots in this structure; since we're a function our ancestors must
have themselves preserved all caller saved state in the stack. This saves
some wasted effort since we won't need to look at the values.
In particular, all caller-save registers are immediately available for
scratch use.
*/
#define FRAME_SIZE (76*8 + 8)
movi FRAME_SIZE, r0
sub.l r15, r0, r15
! Do normal-style register save to support backtrace
st.l r15, 0, r18 ! save link reg
st.l r15, 4, r14 ! save fp
add.l r15, r63, r14 ! setup frame pointer
! hopefully this looks normal to the backtrace now.
addi.l r15, 8, r1 ! base of pt_regs
addi.l r1, 24, r0 ! base of pt_regs.regs
addi.l r0, (63*8), r8 ! base of pt_regs.trregs
/* Note : to be fixed?
struct pt_regs is really designed for holding the state on entry
to an exception, i.e. pc,sr,regs etc. However, for the context
switch state, some of this is not required. But the unwinder takes
struct pt_regs * as an arg so we have to build this structure
to allow unwinding switched tasks in show_state() */
st.q r0, ( 9*8), r9
st.q r0, (10*8), r10
st.q r0, (11*8), r11
st.q r0, (12*8), r12
st.q r0, (13*8), r13
st.q r0, (14*8), r14 ! for unwind, want to look as though we took a trap at
! the point where the process is left in suspended animation, i.e. current
! fp here, not the saved one.
st.q r0, (16*8), r16
st.q r0, (24*8), r24
st.q r0, (25*8), r25
st.q r0, (26*8), r26
st.q r0, (27*8), r27
st.q r0, (28*8), r28
st.q r0, (29*8), r29
st.q r0, (30*8), r30
st.q r0, (31*8), r31
st.q r0, (32*8), r32
st.q r0, (33*8), r33
st.q r0, (34*8), r34
st.q r0, (35*8), r35
st.q r0, (44*8), r44
st.q r0, (45*8), r45
st.q r0, (46*8), r46
st.q r0, (47*8), r47
st.q r0, (48*8), r48
st.q r0, (49*8), r49
st.q r0, (50*8), r50
st.q r0, (51*8), r51
st.q r0, (52*8), r52
st.q r0, (53*8), r53
st.q r0, (54*8), r54
st.q r0, (55*8), r55
st.q r0, (56*8), r56
st.q r0, (57*8), r57
st.q r0, (58*8), r58
st.q r0, (59*8), r59
! do this early as pta->gettr has no pipeline forwarding (=> 5 cycle latency)
! Use a local label to avoid creating a symbol that will confuse the !
! backtrace
pta .Lsave_pc, tr0
gettr tr5, r45
gettr tr6, r46
gettr tr7, r47
st.q r8, (5*8), r45
st.q r8, (6*8), r46
st.q r8, (7*8), r47
! Now switch context
gettr tr0, r9
st.l r3, 0, r15 ! prev->thread.sp
st.l r3, 8, r1 ! prev->thread.kregs
st.l r3, 4, r9 ! prev->thread.pc
st.q r1, 0, r9 ! save prev->thread.pc into pt_regs->pc
! Load PC for next task (init value or save_pc later)
ld.l r5, 4, r18 ! next->thread.pc
! Switch stacks
ld.l r5, 0, r15 ! next->thread.sp
ptabs r18, tr0
! Update current
ld.l r4, 4, r9 ! next->thread_info (2nd element of next task_struct)
putcon r9, kcr0 ! current = next->thread_info
! go to save_pc for a reschedule, or the initial thread.pc for a new process
blink tr0, r63
! Restore (when we come back to a previously saved task)
.Lsave_pc:
addi.l r15, 32, r0 ! r0 = next's regs
addi.l r0, (63*8), r8 ! r8 = next's tr_regs
ld.q r8, (5*8), r45
ld.q r8, (6*8), r46
ld.q r8, (7*8), r47
ptabs r45, tr5
ptabs r46, tr6
ptabs r47, tr7
ld.q r0, ( 9*8), r9
ld.q r0, (10*8), r10
ld.q r0, (11*8), r11
ld.q r0, (12*8), r12
ld.q r0, (13*8), r13
ld.q r0, (14*8), r14
ld.q r0, (16*8), r16
ld.q r0, (24*8), r24
ld.q r0, (25*8), r25
ld.q r0, (26*8), r26
ld.q r0, (27*8), r27
ld.q r0, (28*8), r28
ld.q r0, (29*8), r29
ld.q r0, (30*8), r30
ld.q r0, (31*8), r31
ld.q r0, (32*8), r32
ld.q r0, (33*8), r33
ld.q r0, (34*8), r34
ld.q r0, (35*8), r35
ld.q r0, (44*8), r44
ld.q r0, (45*8), r45
ld.q r0, (46*8), r46
ld.q r0, (47*8), r47
ld.q r0, (48*8), r48
ld.q r0, (49*8), r49
ld.q r0, (50*8), r50
ld.q r0, (51*8), r51
ld.q r0, (52*8), r52
ld.q r0, (53*8), r53
ld.q r0, (54*8), r54
ld.q r0, (55*8), r55
ld.q r0, (56*8), r56
ld.q r0, (57*8), r57
ld.q r0, (58*8), r58
ld.q r0, (59*8), r59
! epilogue
ld.l r15, 0, r18
ld.l r15, 4, r14
ptabs r18, tr0
movi FRAME_SIZE, r0
add r15, r0, r15
blink tr0, r63
__sh64_switch_to_end:
.LFE1:
.size sh64_switch_to,.LFE1-sh64_switch_to
// SPDX-License-Identifier: GPL-2.0
/*
* arch/sh/kernel/cpu/sh5/unwind.c
*
* Copyright (C) 2004 Paul Mundt
* Copyright (C) 2004 Richard Curnow
*/
#include <linux/kallsyms.h>
#include <linux/kernel.h>
#include <linux/types.h>
#include <linux/errno.h>
#include <asm/page.h>
#include <asm/ptrace.h>
#include <asm/processor.h>
#include <asm/io.h>
#include <asm/unwinder.h>
#include <asm/stacktrace.h>
static u8 regcache[63];
/*
* Finding the previous stack frame isn't horribly straightforward as it is
* on some other platforms. In the sh64 case, we don't have "linked" stack
* frames, so we need to do a bit of work to determine the previous frame,
* and in turn, the previous r14/r18 pair.
*
* There are generally a few cases which determine where we can find out
* the r14/r18 values. In the general case, this can be determined by poking
* around the prologue of the symbol PC is in (note that we absolutely must
* have frame pointer support as well as the kernel symbol table mapped,
* otherwise we can't even get this far).
*
* In other cases, such as the interrupt/exception path, we can poke around
* the sp/fp.
*
* Notably, this entire approach is somewhat error prone, and in the event
* that the previous frame cannot be determined, that's all we can do.
* Either way, this still leaves us with a more correct backtrace then what
* we would be able to come up with by walking the stack (which is garbage
* for anything beyond the first frame).
* -- PFM.
*/
static int lookup_prev_stack_frame(unsigned long fp, unsigned long pc,
unsigned long *pprev_fp, unsigned long *pprev_pc,
struct pt_regs *regs)
{
const char *sym;
char namebuf[128];
unsigned long offset;
unsigned long prologue = 0;
unsigned long fp_displacement = 0;
unsigned long fp_prev = 0;
unsigned long offset_r14 = 0, offset_r18 = 0;
int i, found_prologue_end = 0;
sym = kallsyms_lookup(pc, NULL, &offset, NULL, namebuf);
if (!sym)
return -EINVAL;
prologue = pc - offset;
if (!prologue)
return -EINVAL;
/* Validate fp, to avoid risk of dereferencing a bad pointer later.
Assume 128Mb since that's the amount of RAM on a Cayman. Modify
when there is an SH-5 board with more. */
if ((fp < (unsigned long) phys_to_virt(__MEMORY_START)) ||
(fp >= (unsigned long)(phys_to_virt(__MEMORY_START)) + 128*1024*1024) ||
((fp & 7) != 0)) {
return -EINVAL;
}
/*
* Depth to walk, depth is completely arbitrary.
*/
for (i = 0; i < 100; i++, prologue += sizeof(unsigned long)) {
unsigned long op;
u8 major, minor;
u8 src, dest, disp;
op = *(unsigned long *)prologue;
major = (op >> 26) & 0x3f;
src = (op >> 20) & 0x3f;
minor = (op >> 16) & 0xf;
disp = (op >> 10) & 0x3f;
dest = (op >> 4) & 0x3f;
/*
* Stack frame creation happens in a number of ways.. in the
* general case when the stack frame is less than 511 bytes,
* it's generally created by an addi or addi.l:
*
* addi/addi.l r15, -FRAME_SIZE, r15
*
* in the event that the frame size is bigger than this, it's
* typically created using a movi/sub pair as follows:
*
* movi FRAME_SIZE, rX
* sub r15, rX, r15
*/
switch (major) {
case (0x00 >> 2):
switch (minor) {
case 0x8: /* add.l */
case 0x9: /* add */
/* Look for r15, r63, r14 */
if (src == 15 && disp == 63 && dest == 14)
found_prologue_end = 1;
break;
case 0xa: /* sub.l */
case 0xb: /* sub */
if (src != 15 || dest != 15)
continue;
fp_displacement -= regcache[disp];
fp_prev = fp - fp_displacement;
break;
}
break;
case (0xa8 >> 2): /* st.l */
if (src != 15)
continue;
switch (dest) {
case 14:
if (offset_r14 || fp_displacement == 0)
continue;
offset_r14 = (u64)(((((s64)op >> 10) & 0x3ff) << 54) >> 54);
offset_r14 *= sizeof(unsigned long);
offset_r14 += fp_displacement;
break;
case 18:
if (offset_r18 || fp_displacement == 0)
continue;
offset_r18 = (u64)(((((s64)op >> 10) & 0x3ff) << 54) >> 54);
offset_r18 *= sizeof(unsigned long);
offset_r18 += fp_displacement;
break;
}
break;
case (0xcc >> 2): /* movi */
if (dest >= 63) {
printk(KERN_NOTICE "%s: Invalid dest reg %d "
"specified in movi handler. Failed "
"opcode was 0x%lx: ", __func__,
dest, op);
continue;
}
/* Sign extend */
regcache[dest] =
sign_extend64((((u64)op >> 10) & 0xffff), 9);
break;
case (0xd0 >> 2): /* addi */
case (0xd4 >> 2): /* addi.l */
/* Look for r15, -FRAME_SIZE, r15 */
if (src != 15 || dest != 15)
continue;
/* Sign extended frame size.. */
fp_displacement +=
(u64)(((((s64)op >> 10) & 0x3ff) << 54) >> 54);
fp_prev = fp - fp_displacement;
break;
}
if (found_prologue_end && offset_r14 && (offset_r18 || *pprev_pc) && fp_prev)
break;
}
if (offset_r14 == 0 || fp_prev == 0) {
if (!offset_r14)
pr_debug("Unable to find r14 offset\n");
if (!fp_prev)
pr_debug("Unable to find previous fp\n");
return -EINVAL;
}
/* For innermost leaf function, there might not be a offset_r18 */
if (!*pprev_pc && (offset_r18 == 0))
return -EINVAL;
*pprev_fp = *(unsigned long *)(fp_prev + offset_r14);
if (offset_r18)
*pprev_pc = *(unsigned long *)(fp_prev + offset_r18);
*pprev_pc &= ~1;
return 0;
}
/*
* Don't put this on the stack since we'll want to call in to
* sh64_unwinder_dump() when we're close to underflowing the stack
* anyway.
*/
static struct pt_regs here_regs;
extern const char syscall_ret;
extern const char ret_from_syscall;
extern const char ret_from_exception;
extern const char ret_from_irq;
static void sh64_unwind_inner(const struct stacktrace_ops *ops,
void *data, struct pt_regs *regs);
static inline void unwind_nested(const struct stacktrace_ops *ops, void *data,
unsigned long pc, unsigned long fp)
{
if ((fp >= __MEMORY_START) &&
((fp & 7) == 0))
sh64_unwind_inner(ops, data, (struct pt_regs *)fp);
}
static void sh64_unwind_inner(const struct stacktrace_ops *ops,
void *data, struct pt_regs *regs)
{
unsigned long pc, fp;
int ofs = 0;
int first_pass;
pc = regs->pc & ~1;
fp = regs->regs[14];
first_pass = 1;
for (;;) {
int cond;
unsigned long next_fp, next_pc;
if (pc == ((unsigned long)&syscall_ret & ~1)) {
printk("SYSCALL\n");
unwind_nested(ops, data, pc, fp);
return;
}
if (pc == ((unsigned long)&ret_from_syscall & ~1)) {
printk("SYSCALL (PREEMPTED)\n");
unwind_nested(ops, data, pc, fp);
return;
}
/* In this case, the PC is discovered by lookup_prev_stack_frame but
it has 4 taken off it to look like the 'caller' */
if (pc == ((unsigned long)&ret_from_exception & ~1)) {
printk("EXCEPTION\n");
unwind_nested(ops, data, pc, fp);
return;
}
if (pc == ((unsigned long)&ret_from_irq & ~1)) {
printk("IRQ\n");
unwind_nested(ops, data, pc, fp);
return;
}
cond = ((pc >= __MEMORY_START) && (fp >= __MEMORY_START) &&
((pc & 3) == 0) && ((fp & 7) == 0));
pc -= ofs;
ops->address(data, pc, 1);
if (first_pass) {
/* If the innermost frame is a leaf function, it's
* possible that r18 is never saved out to the stack.
*/
next_pc = regs->regs[18];
} else {
next_pc = 0;
}
if (lookup_prev_stack_frame(fp, pc, &next_fp, &next_pc, regs) == 0) {
ofs = sizeof(unsigned long);
pc = next_pc & ~1;
fp = next_fp;
} else {
printk("Unable to lookup previous stack frame\n");
break;
}
first_pass = 0;
}
printk("\n");
}
static void sh64_unwinder_dump(struct task_struct *task,
struct pt_regs *regs,
unsigned long *sp,
const struct stacktrace_ops *ops,
void *data)
{
if (!regs) {
/*
* Fetch current regs if we have no other saved state to back
* trace from.
*/
regs = &here_regs;
__asm__ __volatile__ ("ori r14, 0, %0" : "=r" (regs->regs[14]));
__asm__ __volatile__ ("ori r15, 0, %0" : "=r" (regs->regs[15]));
__asm__ __volatile__ ("ori r18, 0, %0" : "=r" (regs->regs[18]));
__asm__ __volatile__ ("gettr tr0, %0" : "=r" (regs->tregs[0]));
__asm__ __volatile__ ("gettr tr1, %0" : "=r" (regs->tregs[1]));
__asm__ __volatile__ ("gettr tr2, %0" : "=r" (regs->tregs[2]));
__asm__ __volatile__ ("gettr tr3, %0" : "=r" (regs->tregs[3]));
__asm__ __volatile__ ("gettr tr4, %0" : "=r" (regs->tregs[4]));
__asm__ __volatile__ ("gettr tr5, %0" : "=r" (regs->tregs[5]));
__asm__ __volatile__ ("gettr tr6, %0" : "=r" (regs->tregs[6]));
__asm__ __volatile__ ("gettr tr7, %0" : "=r" (regs->tregs[7]));
__asm__ __volatile__ (
"pta 0f, tr0\n\t"
"blink tr0, %0\n\t"
"0: nop"
: "=r" (regs->pc)
);
}
sh64_unwind_inner(ops, data, regs);
}
static struct unwinder sh64_unwinder = {
.name = "sh64-unwinder",
.dump = sh64_unwinder_dump,
.rating = 150,
};
static int __init sh64_unwinder_init(void)
{
return unwinder_register(&sh64_unwinder);
}
early_initcall(sh64_unwinder_init);
/* SPDX-License-Identifier: GPL-2.0
*
* arch/sh/kernel/head_64.S
*
* Copyright (C) 2000, 2001 Paolo Alberelli
* Copyright (C) 2003, 2004 Paul Mundt
*/
#include <linux/init.h>
#include <asm/page.h>
#include <asm/cache.h>
#include <asm/tlb.h>
#include <cpu/registers.h>
#include <cpu/mmu_context.h>
#include <asm/thread_info.h>
/*
* MMU defines: TLB boundaries.
*/
#define MMUIR_FIRST ITLB_FIXED
#define MMUIR_END ITLB_LAST_VAR_UNRESTRICTED+TLB_STEP
#define MMUIR_STEP TLB_STEP
#define MMUDR_FIRST DTLB_FIXED
#define MMUDR_END DTLB_LAST_VAR_UNRESTRICTED+TLB_STEP
#define MMUDR_STEP TLB_STEP
/* Safety check : CONFIG_PAGE_OFFSET has to be a multiple of 512Mb */
#if (CONFIG_PAGE_OFFSET & ((1UL<<29)-1))
#error "CONFIG_PAGE_OFFSET must be a multiple of 512Mb"
#endif
/*
* MMU defines: Fixed TLBs.
*/
/* Deal safely with the case where the base of RAM is not 512Mb aligned */
#define ALIGN_512M_MASK (0xffffffffe0000000)
#define ALIGNED_EFFECTIVE ((CONFIG_PAGE_OFFSET + CONFIG_MEMORY_START) & ALIGN_512M_MASK)
#define ALIGNED_PHYSICAL (CONFIG_MEMORY_START & ALIGN_512M_MASK)
#define MMUIR_TEXT_H (0x0000000000000003 | ALIGNED_EFFECTIVE)
/* Enabled, Shared, ASID 0, Eff. Add. 0xA0000000 */
#define MMUIR_TEXT_L (0x000000000000009a | ALIGNED_PHYSICAL)
/* 512 Mb, Cacheable, Write-back, execute, Not User, Ph. Add. */
#define MMUDR_CACHED_H 0x0000000000000003 | ALIGNED_EFFECTIVE
/* Enabled, Shared, ASID 0, Eff. Add. 0xA0000000 */
#define MMUDR_CACHED_L 0x000000000000015a | ALIGNED_PHYSICAL
/* 512 Mb, Cacheable, Write-back, read/write, Not User, Ph. Add. */
#ifdef CONFIG_CACHE_OFF
#define ICCR0_INIT_VAL ICCR0_OFF /* ICACHE off */
#else
#define ICCR0_INIT_VAL ICCR0_ON | ICCR0_ICI /* ICE + ICI */
#endif
#define ICCR1_INIT_VAL ICCR1_NOLOCK /* No locking */
#if defined (CONFIG_CACHE_OFF)
#define OCCR0_INIT_VAL OCCR0_OFF /* D-cache: off */
#elif defined (CONFIG_CACHE_WRITETHROUGH)
#define OCCR0_INIT_VAL OCCR0_ON | OCCR0_OCI | OCCR0_WT /* D-cache: on, */
/* WT, invalidate */
#elif defined (CONFIG_CACHE_WRITEBACK)
#define OCCR0_INIT_VAL OCCR0_ON | OCCR0_OCI | OCCR0_WB /* D-cache: on, */
/* WB, invalidate */
#else
#error preprocessor flag CONFIG_CACHE_... not recognized!
#endif
#define OCCR1_INIT_VAL OCCR1_NOLOCK /* No locking */
.section .empty_zero_page, "aw"
.global empty_zero_page
empty_zero_page:
.long 1 /* MOUNT_ROOT_RDONLY */
.long 0 /* RAMDISK_FLAGS */
.long 0x0200 /* ORIG_ROOT_DEV */
.long 1 /* LOADER_TYPE */
.long 0x00800000 /* INITRD_START */
.long 0x00800000 /* INITRD_SIZE */
.long 0
.text
.balign 4096,0,4096
.section .data, "aw"
.balign PAGE_SIZE
.section .data, "aw"
.balign PAGE_SIZE
.global mmu_pdtp_cache
mmu_pdtp_cache:
.space PAGE_SIZE, 0
.global fpu_in_use
fpu_in_use: .quad 0
__HEAD
.balign L1_CACHE_BYTES
/*
* Condition at the entry of __stext:
* . Reset state:
* . SR.FD = 1 (FPU disabled)
* . SR.BL = 1 (Exceptions disabled)
* . SR.MD = 1 (Privileged Mode)
* . SR.MMU = 0 (MMU Disabled)
* . SR.CD = 0 (CTC User Visible)
* . SR.IMASK = Undefined (Interrupt Mask)
*
* Operations supposed to be performed by __stext:
* . prevent speculative fetch onto device memory while MMU is off
* . reflect as much as possible SH5 ABI (r15, r26, r27, r18)
* . first, save CPU state and set it to something harmless
* . any CPU detection and/or endianness settings (?)
* . initialize EMI/LMI (but not TMU/RTC/INTC/SCIF): TBD
* . set initial TLB entries for cached and uncached regions
* (no fine granularity paging)
* . set initial cache state
* . enable MMU and caches
* . set CPU to a consistent state
* . registers (including stack pointer and current/KCR0)
* . NOT expecting to set Exception handling nor VBR/RESVEC/DCR
* at this stage. This is all to later Linux initialization steps.
* . initialize FPU
* . clear BSS
* . jump into start_kernel()
* . be prepared to hopeless start_kernel() returns.
*
*/
.global _stext
_stext:
/*
* Prevent speculative fetch on device memory due to
* uninitialized target registers.
*/
ptabs/u ZERO, tr0
ptabs/u ZERO, tr1
ptabs/u ZERO, tr2
ptabs/u ZERO, tr3
ptabs/u ZERO, tr4
ptabs/u ZERO, tr5
ptabs/u ZERO, tr6
ptabs/u ZERO, tr7
synci
/*
* Read/Set CPU state. After this block:
* r29 = Initial SR
*/
getcon SR, r29
movi SR_HARMLESS, r20
putcon r20, SR
/*
* Initialize EMI/LMI. To Be Done.
*/
/*
* CPU detection and/or endianness settings (?). To Be Done.
* Pure PIC code here, please ! Just save state into r30.
* After this block:
* r30 = CPU type/Platform Endianness
*/
/*
* Set initial TLB entries for cached and uncached regions.
* Note: PTA/BLINK is PIC code, PTABS/BLINK isn't !
*/
/* Clear ITLBs */
pta clear_ITLB, tr1
movi MMUIR_FIRST, r21
movi MMUIR_END, r22
clear_ITLB:
putcfg r21, 0, ZERO /* Clear MMUIR[n].PTEH.V */
addi r21, MMUIR_STEP, r21
bne r21, r22, tr1
/* Clear DTLBs */
pta clear_DTLB, tr1
movi MMUDR_FIRST, r21
movi MMUDR_END, r22
clear_DTLB:
putcfg r21, 0, ZERO /* Clear MMUDR[n].PTEH.V */
addi r21, MMUDR_STEP, r21
bne r21, r22, tr1
/* Map one big (512Mb) page for ITLB */
movi MMUIR_FIRST, r21
movi MMUIR_TEXT_L, r22 /* PTEL first */
add.l r22, r63, r22 /* Sign extend */
putcfg r21, 1, r22 /* Set MMUIR[0].PTEL */
movi MMUIR_TEXT_H, r22 /* PTEH last */
add.l r22, r63, r22 /* Sign extend */
putcfg r21, 0, r22 /* Set MMUIR[0].PTEH */
/* Map one big CACHED (512Mb) page for DTLB */
movi MMUDR_FIRST, r21
movi MMUDR_CACHED_L, r22 /* PTEL first */
add.l r22, r63, r22 /* Sign extend */
putcfg r21, 1, r22 /* Set MMUDR[0].PTEL */
movi MMUDR_CACHED_H, r22 /* PTEH last */
add.l r22, r63, r22 /* Sign extend */
putcfg r21, 0, r22 /* Set MMUDR[0].PTEH */
/*
* Setup a DTLB translation for SCIF phys.
*/
addi r21, MMUDR_STEP, r21
movi 0x0a03, r22 /* SCIF phys */
shori 0x0148, r22
putcfg r21, 1, r22 /* PTEL first */
movi 0xfa03, r22 /* 0xfa030000, fixed SCIF virt */
shori 0x0003, r22
putcfg r21, 0, r22 /* PTEH last */
/*
* Set cache behaviours.
*/
/* ICache */
movi ICCR_BASE, r21
movi ICCR0_INIT_VAL, r22
movi ICCR1_INIT_VAL, r23
putcfg r21, ICCR_REG0, r22
putcfg r21, ICCR_REG1, r23
/* OCache */
movi OCCR_BASE, r21
movi OCCR0_INIT_VAL, r22
movi OCCR1_INIT_VAL, r23
putcfg r21, OCCR_REG0, r22
putcfg r21, OCCR_REG1, r23
/*
* Enable Caches and MMU. Do the first non-PIC jump.
* Now head.S global variables, constants and externs
* can be used.
*/
getcon SR, r21
movi SR_ENABLE_MMU, r22
or r21, r22, r21
putcon r21, SSR
movi hyperspace, r22
ori r22, 1, r22 /* Make it SHmedia, not required but..*/
putcon r22, SPC
synco
rte /* And now go into the hyperspace ... */
hyperspace: /* ... that's the next instruction ! */
/*
* Set CPU to a consistent state.
* r31 = FPU support flag
* tr0/tr7 in use. Others give a chance to loop somewhere safe
*/
movi start_kernel, r32
ori r32, 1, r32
ptabs r32, tr0 /* r32 = _start_kernel address */
pta/u hopeless, tr1
pta/u hopeless, tr2
pta/u hopeless, tr3
pta/u hopeless, tr4
pta/u hopeless, tr5
pta/u hopeless, tr6
pta/u hopeless, tr7
gettr tr1, r28 /* r28 = hopeless address */
/* Set initial stack pointer */
movi init_thread_union, SP
putcon SP, KCR0 /* Set current to init_task */
movi THREAD_SIZE, r22 /* Point to the end */
add SP, r22, SP
/*
* Initialize FPU.
* Keep FPU flag in r31. After this block:
* r31 = FPU flag
*/
movi fpu_in_use, r31 /* Temporary */
#ifdef CONFIG_SH_FPU
getcon SR, r21
movi SR_ENABLE_FPU, r22
and r21, r22, r22
putcon r22, SR /* Try to enable */
getcon SR, r22
xor r21, r22, r21
shlri r21, 15, r21 /* Supposedly 0/1 */
st.q r31, 0 , r21 /* Set fpu_in_use */
#else
movi 0, r21
st.q r31, 0 , r21 /* Set fpu_in_use */
#endif
or r21, ZERO, r31 /* Set FPU flag at last */
#ifndef CONFIG_SH_NO_BSS_INIT
/* Don't clear BSS if running on slow platforms such as an RTL simulation,
remote memory via SHdebug link, etc. For these the memory can be guaranteed
to be all zero on boot anyway. */
/*
* Clear bss
*/
pta clear_quad, tr1
movi __bss_start, r22
movi _end, r23
clear_quad:
st.q r22, 0, ZERO
addi r22, 8, r22
bne r22, r23, tr1 /* Both quad aligned, see vmlinux.lds.S */
#endif
pta/u hopeless, tr1
/* Say bye to head.S but be prepared to wrongly get back ... */
blink tr0, LINK
/* If we ever get back here through LINK/tr1-tr7 */
pta/u hopeless, tr7
hopeless:
/*
* Something's badly wrong here. Loop endlessly,
* there's nothing more we can do about it.
*
* Note on hopeless: it can be jumped into invariably
* before or after jumping into hyperspace. The only
* requirement is to be PIC called (PTA) before and
* any way (PTA/PTABS) after. According to Virtual
* to Physical mapping a simulator/emulator can easily
* tell where we came here from just looking at hopeless
* (PC) address.
*
* For debugging purposes:
* (r28) hopeless/loop address
* (r29) Original SR
* (r30) CPU type/Platform endianness
* (r31) FPU Support
* (r32) _start_kernel address
*/
blink tr7, ZERO
// SPDX-License-Identifier: GPL-2.0
/*
* SHmedia irqflags support
*
* Copyright (C) 2006 - 2009 Paul Mundt
*/
#include <linux/irqflags.h>
#include <linux/module.h>
#include <cpu/registers.h>
void notrace arch_local_irq_restore(unsigned long flags)
{
unsigned long long __dummy;
if (flags == ARCH_IRQ_DISABLED) {
__asm__ __volatile__ (
"getcon " __SR ", %0\n\t"
"or %0, %1, %0\n\t"
"putcon %0, " __SR "\n\t"
: "=&r" (__dummy)
: "r" (ARCH_IRQ_DISABLED)
);
} else {
__asm__ __volatile__ (
"getcon " __SR ", %0\n\t"
"and %0, %1, %0\n\t"
"putcon %0, " __SR "\n\t"
: "=&r" (__dummy)
: "r" (~ARCH_IRQ_DISABLED)
);
}
}
EXPORT_SYMBOL(arch_local_irq_restore);
unsigned long notrace arch_local_save_flags(void)
{
unsigned long flags;
__asm__ __volatile__ (
"getcon " __SR ", %0\n\t"
"and %0, %1, %0"
: "=&r" (flags)
: "r" (ARCH_IRQ_DISABLED)
);
return flags;
}
EXPORT_SYMBOL(arch_local_save_flags);
...@@ -46,15 +46,6 @@ int apply_relocate_add(Elf32_Shdr *sechdrs, ...@@ -46,15 +46,6 @@ int apply_relocate_add(Elf32_Shdr *sechdrs,
+ ELF32_R_SYM(rel[i].r_info); + ELF32_R_SYM(rel[i].r_info);
relocation = sym->st_value + rel[i].r_addend; relocation = sym->st_value + rel[i].r_addend;
#ifdef CONFIG_SUPERH64
/* For text addresses, bit2 of the st_other field indicates
* whether the symbol is SHmedia (1) or SHcompact (0). If
* SHmedia, the LSB of the symbol needs to be asserted
* for the CPU to be in SHmedia mode when it starts executing
* the branch target. */
relocation |= !!(sym->st_other & 4);
#endif
switch (ELF32_R_TYPE(rel[i].r_info)) { switch (ELF32_R_TYPE(rel[i].r_info)) {
case R_SH_NONE: case R_SH_NONE:
break; break;
......
...@@ -23,9 +23,7 @@ EXPORT_SYMBOL(__stack_chk_guard); ...@@ -23,9 +23,7 @@ EXPORT_SYMBOL(__stack_chk_guard);
*/ */
int arch_dup_task_struct(struct task_struct *dst, struct task_struct *src) int arch_dup_task_struct(struct task_struct *dst, struct task_struct *src)
{ {
#ifdef CONFIG_SUPERH32
unlazy_fpu(src, task_pt_regs(src)); unlazy_fpu(src, task_pt_regs(src));
#endif
*dst = *src; *dst = *src;
if (src->thread.xstate) { if (src->thread.xstate) {
......
This diff is collapsed.
This diff is collapsed.
...@@ -4,9 +4,7 @@ ...@@ -4,9 +4,7 @@
#include <linux/kernel.h> #include <linux/kernel.h>
#include <linux/reboot.h> #include <linux/reboot.h>
#include <linux/module.h> #include <linux/module.h>
#ifdef CONFIG_SUPERH32
#include <asm/watchdog.h> #include <asm/watchdog.h>
#endif
#include <asm/addrspace.h> #include <asm/addrspace.h>
#include <asm/reboot.h> #include <asm/reboot.h>
#include <asm/tlbflush.h> #include <asm/tlbflush.h>
...@@ -15,13 +13,11 @@ ...@@ -15,13 +13,11 @@
void (*pm_power_off)(void); void (*pm_power_off)(void);
EXPORT_SYMBOL(pm_power_off); EXPORT_SYMBOL(pm_power_off);
#ifdef CONFIG_SUPERH32
static void watchdog_trigger_immediate(void) static void watchdog_trigger_immediate(void)
{ {
sh_wdt_write_cnt(0xFF); sh_wdt_write_cnt(0xFF);
sh_wdt_write_csr(0xC2); sh_wdt_write_csr(0xC2);
} }
#endif
static void native_machine_restart(char * __unused) static void native_machine_restart(char * __unused)
{ {
...@@ -33,10 +29,8 @@ static void native_machine_restart(char * __unused) ...@@ -33,10 +29,8 @@ static void native_machine_restart(char * __unused)
/* Address error with SR.BL=1 first. */ /* Address error with SR.BL=1 first. */
trigger_address_error(); trigger_address_error();
#ifdef CONFIG_SUPERH32
/* If that fails or is unsupported, go for the watchdog next. */ /* If that fails or is unsupported, go for the watchdog next. */
watchdog_trigger_immediate(); watchdog_trigger_immediate();
#endif
/* /*
* Give up and sleep. * Give up and sleep.
......
// SPDX-License-Identifier: GPL-2.0
/*
* arch/sh/kernel/sh_ksyms_64.c
*
* Copyright (C) 2000, 2001 Paolo Alberelli
*/
#include <linux/rwsem.h>
#include <linux/module.h>
#include <linux/smp.h>
#include <linux/user.h>
#include <linux/elfcore.h>
#include <linux/sched.h>
#include <linux/in6.h>
#include <linux/interrupt.h>
#include <linux/screen_info.h>
#include <asm/cacheflush.h>
#include <asm/processor.h>
#include <linux/uaccess.h>
#include <asm/checksum.h>
#include <asm/io.h>
#include <asm/delay.h>
#include <asm/irq.h>
EXPORT_SYMBOL(__put_user_asm_b);
EXPORT_SYMBOL(__put_user_asm_w);
EXPORT_SYMBOL(__put_user_asm_l);
EXPORT_SYMBOL(__put_user_asm_q);
EXPORT_SYMBOL(__get_user_asm_b);
EXPORT_SYMBOL(__get_user_asm_w);
EXPORT_SYMBOL(__get_user_asm_l);
EXPORT_SYMBOL(__get_user_asm_q);
EXPORT_SYMBOL(__clear_user);
EXPORT_SYMBOL(copy_page);
EXPORT_SYMBOL(__copy_user);
EXPORT_SYMBOL(empty_zero_page);
EXPORT_SYMBOL(memcpy);
EXPORT_SYMBOL(memset);
EXPORT_SYMBOL(__udelay);
EXPORT_SYMBOL(__ndelay);
EXPORT_SYMBOL(__const_udelay);
EXPORT_SYMBOL(strlen);
EXPORT_SYMBOL(strcpy);
/* Ugh. These come in from libgcc.a at link time. */
#define DECLARE_EXPORT(name) extern void name(void);EXPORT_SYMBOL(name)
DECLARE_EXPORT(__sdivsi3);
DECLARE_EXPORT(__sdivsi3_1);
DECLARE_EXPORT(__sdivsi3_2);
DECLARE_EXPORT(__udivsi3);
DECLARE_EXPORT(__div_table);
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
...@@ -3,14 +3,7 @@ ...@@ -3,14 +3,7 @@
* ld script to make SuperH Linux kernel * ld script to make SuperH Linux kernel
* Written by Niibe Yutaka and Paul Mundt * Written by Niibe Yutaka and Paul Mundt
*/ */
#ifdef CONFIG_SUPERH64
#define LOAD_OFFSET PAGE_OFFSET
OUTPUT_ARCH(sh:sh5)
#else
#define LOAD_OFFSET 0
OUTPUT_ARCH(sh) OUTPUT_ARCH(sh)
#endif
#include <asm/thread_info.h> #include <asm/thread_info.h>
#include <asm/cache.h> #include <asm/cache.h>
#include <asm/vmlinux.lds.h> #include <asm/vmlinux.lds.h>
...@@ -28,14 +21,13 @@ SECTIONS ...@@ -28,14 +21,13 @@ SECTIONS
_text = .; /* Text and read-only data */ _text = .; /* Text and read-only data */
.empty_zero_page : AT(ADDR(.empty_zero_page) - LOAD_OFFSET) { .empty_zero_page : AT(ADDR(.empty_zero_page)) {
*(.empty_zero_page) *(.empty_zero_page)
} = 0 } = 0
.text : AT(ADDR(.text) - LOAD_OFFSET) { .text : AT(ADDR(.text)) {
HEAD_TEXT HEAD_TEXT
TEXT_TEXT TEXT_TEXT
EXTRA_TEXT
SCHED_TEXT SCHED_TEXT
CPUIDLE_TEXT CPUIDLE_TEXT
LOCK_TEXT LOCK_TEXT
...@@ -62,7 +54,7 @@ SECTIONS ...@@ -62,7 +54,7 @@ SECTIONS
INIT_DATA_SECTION(16) INIT_DATA_SECTION(16)
. = ALIGN(4); . = ALIGN(4);
.machvec.init : AT(ADDR(.machvec.init) - LOAD_OFFSET) { .machvec.init : AT(ADDR(.machvec.init)) {
__machvec_start = .; __machvec_start = .;
*(.machvec.init) *(.machvec.init)
__machvec_end = .; __machvec_end = .;
...@@ -74,8 +66,8 @@ SECTIONS ...@@ -74,8 +66,8 @@ SECTIONS
* .exit.text is discarded at runtime, not link time, to deal with * .exit.text is discarded at runtime, not link time, to deal with
* references from __bug_table * references from __bug_table
*/ */
.exit.text : AT(ADDR(.exit.text) - LOAD_OFFSET) { EXIT_TEXT } .exit.text : AT(ADDR(.exit.text)) { EXIT_TEXT }
.exit.data : AT(ADDR(.exit.data) - LOAD_OFFSET) { EXIT_DATA } .exit.data : AT(ADDR(.exit.data)) { EXIT_DATA }
. = ALIGN(PAGE_SIZE); . = ALIGN(PAGE_SIZE);
__init_end = .; __init_end = .;
......
#
# Makefile for the SH-5 specific library files..
#
# Copyright (C) 2000, 2001 Paolo Alberelli
# Copyright (C) 2003 - 2008 Paul Mundt
#
# This file is subject to the terms and conditions of the GNU General Public
# License. See the file "COPYING" in the main directory of this archive
# for more details.
#
# Panic should really be compiled as PIC
lib-y := udelay.o panic.o memcpy.o memset.o \
copy_user_memcpy.o copy_page.o strcpy.o strlen.o
# Extracted from libgcc
lib-y += udivsi3.o udivdi3.o sdivsi3.o
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
/*
* Copyright (C) 2003 Richard Curnow, SuperH UK Limited
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*/
void
panic_handler(unsigned long panicPC, unsigned long panicSSR,
unsigned long panicEXPEVT)
{
/* Never return from the panic handler */
for (;;) ;
}
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment