Commit 38aa4da5 authored by Prameela Rani Garnepudi's avatar Prameela Rani Garnepudi Committed by Kalle Valo

Bluetooth: btrsi: add new rsi bluetooth driver

Redpine bluetooth driver is a thin driver which depends on
'rsi_91x' driver for transmitting and receiving packets
to/from device. It creates hci interface when attach() is
called from 'rsi_91x' module.
Signed-off-by: default avatarPrameela Rani Garnepudi <prameela.j04cs@gmail.com>
Signed-off-by: default avatarSiva Rebbagondla <siva.rebbagondla@redpinesignals.com>
Acked-by: default avatarMarcel Holtmann <marcel@holtmann.org>
Reviewed-by: default avatarMarcel Holtmann <marcel@holtmann.org>
Signed-off-by: default avatarAmitkumar Karwar <amit.karwar@redpinesignals.com>
Signed-off-by: default avatarKalle Valo <kvalo@codeaurora.org>
parent 2108df3c
...@@ -392,4 +392,16 @@ config BT_QCOMSMD ...@@ -392,4 +392,16 @@ config BT_QCOMSMD
Say Y here to compile support for HCI over Qualcomm SMD into the Say Y here to compile support for HCI over Qualcomm SMD into the
kernel or say M to compile as a module. kernel or say M to compile as a module.
config BT_HCIRSI
tristate "Redpine HCI support"
default n
select RSI_COEX
help
Redpine BT driver.
This driver handles BT traffic from upper layers and pass
to the RSI_91x coex module for further scheduling to device
Say Y here to compile support for HCI over Redpine into the
kernel or say M to compile as a module.
endmenu endmenu
...@@ -28,6 +28,8 @@ obj-$(CONFIG_BT_QCA) += btqca.o ...@@ -28,6 +28,8 @@ obj-$(CONFIG_BT_QCA) += btqca.o
obj-$(CONFIG_BT_HCIUART_NOKIA) += hci_nokia.o obj-$(CONFIG_BT_HCIUART_NOKIA) += hci_nokia.o
obj-$(CONFIG_BT_HCIRSI) += btrsi.o
btmrvl-y := btmrvl_main.o btmrvl-y := btmrvl_main.o
btmrvl-$(CONFIG_DEBUG_FS) += btmrvl_debugfs.o btmrvl-$(CONFIG_DEBUG_FS) += btmrvl_debugfs.o
......
/**
* Copyright (c) 2017 Redpine Signals Inc.
*
* Permission to use, copy, modify, and/or distribute this software for any
* purpose with or without fee is hereby granted, provided that the above
* copyright notice and this permission notice appear in all copies.
*
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
* ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
* ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
*/
#include <linux/version.h>
#include <linux/module.h>
#include <linux/kernel.h>
#include <net/bluetooth/bluetooth.h>
#include <net/bluetooth/hci_core.h>
#include <asm/unaligned.h>
#include <net/rsi_91x.h>
#include <net/genetlink.h>
#define RSI_HEADROOM_FOR_BT_HAL 16
#define RSI_FRAME_DESC_SIZE 16
struct rsi_hci_adapter {
void *priv;
struct rsi_proto_ops *proto_ops;
struct hci_dev *hdev;
};
static int rsi_hci_open(struct hci_dev *hdev)
{
return 0;
}
static int rsi_hci_close(struct hci_dev *hdev)
{
return 0;
}
static int rsi_hci_flush(struct hci_dev *hdev)
{
return 0;
}
static int rsi_hci_send_pkt(struct hci_dev *hdev, struct sk_buff *skb)
{
struct rsi_hci_adapter *h_adapter = hci_get_drvdata(hdev);
struct sk_buff *new_skb = NULL;
switch (hci_skb_pkt_type(skb)) {
case HCI_COMMAND_PKT:
hdev->stat.cmd_tx++;
break;
case HCI_ACLDATA_PKT:
hdev->stat.acl_tx++;
break;
case HCI_SCODATA_PKT:
hdev->stat.sco_tx++;
break;
}
if (skb_headroom(skb) < RSI_HEADROOM_FOR_BT_HAL) {
/* Insufficient skb headroom - allocate a new skb */
new_skb = skb_realloc_headroom(skb, RSI_HEADROOM_FOR_BT_HAL);
if (unlikely(!new_skb))
return -ENOMEM;
bt_cb(new_skb)->pkt_type = hci_skb_pkt_type(skb);
kfree_skb(skb);
skb = new_skb;
}
return h_adapter->proto_ops->coex_send_pkt(h_adapter->priv, skb,
RSI_BT_Q);
}
static int rsi_hci_recv_pkt(void *priv, const u8 *pkt)
{
struct rsi_hci_adapter *h_adapter = priv;
struct hci_dev *hdev = h_adapter->hdev;
struct sk_buff *skb;
int pkt_len = get_unaligned_le16(pkt) & 0x0fff;
skb = dev_alloc_skb(pkt_len);
if (!skb)
return -ENOMEM;
memcpy(skb->data, pkt + RSI_FRAME_DESC_SIZE, pkt_len);
skb_put(skb, pkt_len);
h_adapter->hdev->stat.byte_rx += skb->len;
hci_skb_pkt_type(skb) = pkt[14];
return hci_recv_frame(hdev, skb);
}
static int rsi_hci_attach(void *priv, struct rsi_proto_ops *ops)
{
struct rsi_hci_adapter *h_adapter = NULL;
struct hci_dev *hdev;
int err = 0;
h_adapter = kzalloc(sizeof(*h_adapter), GFP_KERNEL);
if (!h_adapter)
return -ENOMEM;
h_adapter->priv = priv;
ops->set_bt_context(priv, h_adapter);
h_adapter->proto_ops = ops;
hdev = hci_alloc_dev();
if (!hdev) {
BT_ERR("Failed to alloc HCI device");
goto err;
}
h_adapter->hdev = hdev;
if (ops->get_host_intf(priv) == RSI_HOST_INTF_SDIO)
hdev->bus = HCI_SDIO;
else
hdev->bus = HCI_USB;
hci_set_drvdata(hdev, h_adapter);
hdev->dev_type = HCI_PRIMARY;
hdev->open = rsi_hci_open;
hdev->close = rsi_hci_close;
hdev->flush = rsi_hci_flush;
hdev->send = rsi_hci_send_pkt;
err = hci_register_dev(hdev);
if (err < 0) {
BT_ERR("HCI registration failed with errcode %d", err);
hci_free_dev(hdev);
goto err;
}
return 0;
err:
h_adapter->hdev = NULL;
kfree(h_adapter);
return -EINVAL;
}
static void rsi_hci_detach(void *priv)
{
struct rsi_hci_adapter *h_adapter = priv;
struct hci_dev *hdev;
if (!h_adapter)
return;
hdev = h_adapter->hdev;
if (hdev) {
hci_unregister_dev(hdev);
hci_free_dev(hdev);
h_adapter->hdev = NULL;
}
kfree(h_adapter);
}
const struct rsi_mod_ops rsi_bt_ops = {
.attach = rsi_hci_attach,
.detach = rsi_hci_detach,
.recv_pkt = rsi_hci_recv_pkt,
};
EXPORT_SYMBOL(rsi_bt_ops);
static int rsi_91x_bt_module_init(void)
{
return 0;
}
static void rsi_91x_bt_module_exit(void)
{
return;
}
module_init(rsi_91x_bt_module_init);
module_exit(rsi_91x_bt_module_exit);
MODULE_AUTHOR("Redpine Signals Inc");
MODULE_DESCRIPTION("RSI BT driver");
MODULE_SUPPORTED_DEVICE("RSI-BT");
MODULE_LICENSE("Dual BSD/GPL");
...@@ -49,6 +49,8 @@ struct rsi_proto_ops { ...@@ -49,6 +49,8 @@ struct rsi_proto_ops {
struct rsi_mod_ops { struct rsi_mod_ops {
int (*attach)(void *priv, struct rsi_proto_ops *ops); int (*attach)(void *priv, struct rsi_proto_ops *ops);
void (*detach)(void *priv); void (*detach)(void *priv);
int (*recv_pkt)(void *priv, u8 *msg); int (*recv_pkt)(void *priv, const u8 *msg);
}; };
extern const struct rsi_mod_ops rsi_bt_ops;
#endif #endif
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment