Commit 38e9002b authored by Vardan Mikayelyan's avatar Vardan Mikayelyan Committed by Felipe Balbi

usb: dwc2: gadget: Add new core parameter for low speed

Added new core param for low speed, which can be used only when SNPSID
is equal to DWC2_CORE_FS_IOT. When LS mode is enabled, we are
restricting ep types and providing to upper layer only INTR and CTRL
endpoints.
Signed-off-by: default avatarVardan Mikayelyan <mvardan@synopsys.com>
Signed-off-by: default avatarJohn Youn <johnyoun@synopsys.com>
Signed-off-by: default avatarFelipe Balbi <felipe.balbi@linux.intel.com>
parent 552d940f
......@@ -467,6 +467,7 @@ struct dwc2_core_params {
int speed;
#define DWC2_SPEED_PARAM_HIGH 0
#define DWC2_SPEED_PARAM_FULL 1
#define DWC2_SPEED_PARAM_LOW 2
int enable_dynamic_fifo;
int en_multiple_tx_fifo;
......
......@@ -3175,7 +3175,8 @@ void dwc2_hsotg_core_init_disconnected(struct dwc2_hsotg *hsotg,
GUSBCFG_HNPCAP);
if (hsotg->params.phy_type == DWC2_PHY_TYPE_PARAM_FS &&
hsotg->params.speed == DWC2_SPEED_PARAM_FULL) {
(hsotg->params.speed == DWC2_SPEED_PARAM_FULL ||
hsotg->params.speed == DWC2_SPEED_PARAM_LOW)) {
/* FS/LS Dedicated Transceiver Interface */
usbcfg |= GUSBCFG_PHYSEL;
} else {
......@@ -3192,14 +3193,21 @@ void dwc2_hsotg_core_init_disconnected(struct dwc2_hsotg *hsotg,
__orr32(hsotg->regs + DCTL, DCTL_SFTDISCON);
dcfg |= DCFG_EPMISCNT(1);
if (hsotg->params.speed == DWC2_SPEED_PARAM_FULL) {
switch (hsotg->params.speed) {
case DWC2_SPEED_PARAM_LOW:
dcfg |= DCFG_DEVSPD_LS;
break;
case DWC2_SPEED_PARAM_FULL:
if (hsotg->params.phy_type == DWC2_PHY_TYPE_PARAM_FS)
dcfg |= DCFG_DEVSPD_FS48;
else
dcfg |= DCFG_DEVSPD_FS;
} else {
break;
default:
dcfg |= DCFG_DEVSPD_HS;
}
dwc2_writel(dcfg, hsotg->regs + DCFG);
/* Clear any pending OTG interrupts */
......@@ -4388,14 +4396,21 @@ static void dwc2_hsotg_initep(struct dwc2_hsotg *hsotg,
hs_ep->parent = hsotg;
hs_ep->ep.name = hs_ep->name;
usb_ep_set_maxpacket_limit(&hs_ep->ep, epnum ? 1024 : EP0_MPS_LIMIT);
if (hsotg->params.speed == DWC2_SPEED_PARAM_LOW)
usb_ep_set_maxpacket_limit(&hs_ep->ep, 8);
else
usb_ep_set_maxpacket_limit(&hs_ep->ep,
epnum ? 1024 : EP0_MPS_LIMIT);
hs_ep->ep.ops = &dwc2_hsotg_ep_ops;
if (epnum == 0) {
hs_ep->ep.caps.type_control = true;
} else {
if (hsotg->params.speed != DWC2_SPEED_PARAM_LOW) {
hs_ep->ep.caps.type_iso = true;
hs_ep->ep.caps.type_bulk = true;
}
hs_ep->ep.caps.type_int = true;
}
......
......@@ -230,9 +230,10 @@ static int dwc2_phy_init(struct dwc2_hsotg *hsotg, bool select_phy)
u32 usbcfg;
int retval = 0;
if (hsotg->params.speed == DWC2_SPEED_PARAM_FULL &&
if ((hsotg->params.speed == DWC2_SPEED_PARAM_FULL ||
hsotg->params.speed == DWC2_SPEED_PARAM_LOW) &&
hsotg->params.phy_type == DWC2_PHY_TYPE_PARAM_FS) {
/* If FS mode with FS PHY */
/* If FS/LS mode with FS/LS PHY */
retval = dwc2_fs_phy_init(hsotg, select_phy);
if (retval)
return retval;
......@@ -2277,7 +2278,8 @@ static void dwc2_core_host_init(struct dwc2_hsotg *hsotg)
/* Initialize Host Configuration Register */
dwc2_init_fs_ls_pclk_sel(hsotg);
if (hsotg->params.speed == DWC2_SPEED_PARAM_FULL) {
if (hsotg->params.speed == DWC2_SPEED_PARAM_FULL ||
hsotg->params.speed == DWC2_SPEED_PARAM_LOW) {
hcfg = dwc2_readl(hsotg->regs + HCFG);
hcfg |= HCFG_FSLSSUPP;
dwc2_writel(hcfg, hsotg->regs + HCFG);
......
......@@ -742,14 +742,18 @@ static void dwc2_set_param_speed(struct dwc2_hsotg *hsotg, int val)
{
int valid = 1;
if (DWC2_OUT_OF_BOUNDS(val, 0, 1)) {
if (DWC2_OUT_OF_BOUNDS(val, 0, 2)) {
if (val >= 0) {
dev_err(hsotg->dev, "Wrong value for speed parameter\n");
dev_err(hsotg->dev, "max_speed parameter must be 0 or 1\n");
dev_err(hsotg->dev, "max_speed parameter must be 0, 1, or 2\n");
}
valid = 0;
}
if (dwc2_is_hs_iot(hsotg) &&
val == DWC2_SPEED_PARAM_LOW)
valid = 0;
if (val == DWC2_SPEED_PARAM_HIGH &&
dwc2_get_param_phy_type(hsotg) == DWC2_PHY_TYPE_PARAM_FS)
valid = 0;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment