drm/radeon/dpm: add smc fan control for SI (v2)

Enable smc fan control for SI boards.  Should
reduce the fan noise on systems with a higher
default fan profile.

v2: disable by default, add rpm controls

bug:
https://bugs.freedesktop.org/show_bug.cgi?id=73338Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drivers/gpu/drm/radeon/ppsmc.h

@@ -56,6 +56,9 @@
 #define PPSMC_STATEFLAG_DEEPSLEEP_THROTTLE 0x20
 #define PPSMC_STATEFLAG_DEEPSLEEP_BYPASS   0x40
 
+#define FDO_MODE_HARDWARE 0
+#define FDO_MODE_PIECE_WISE_LINEAR 1
+
 #define PPSMC_Result_OK             ((uint8_t)0x01)
 #define PPSMC_Result_Failed         ((uint8_t)0xFF)
 
@@ -79,6 +82,8 @@ typedef uint8_t PPSMC_Result;
 #define PPSMC_MSG_DisableCac                ((uint8_t)0x54)
 #define PPSMC_TDPClampingActive             ((uint8_t)0x59)
 #define PPSMC_TDPClampingInactive           ((uint8_t)0x5A)
+#define PPSMC_StartFanControl               ((uint8_t)0x5B)
+#define PPSMC_StopFanControl                ((uint8_t)0x5C)
 #define PPSMC_MSG_NoDisplay                 ((uint8_t)0x5D)
 #define PPSMC_MSG_HasDisplay                ((uint8_t)0x5E)
 #define PPSMC_MSG_UVDPowerOFF               ((uint8_t)0x60)

drivers/gpu/drm/radeon/r600_dpm.h

@@ -96,6 +96,9 @@
 #define R600_TEMP_RANGE_MIN (90 * 1000)
 #define R600_TEMP_RANGE_MAX (120 * 1000)
 
+#define FDO_PWM_MODE_STATIC  1
+#define FDO_PWM_MODE_STATIC_RPM 5
+
 enum r600_power_level {
 	R600_POWER_LEVEL_LOW = 0,
 	R600_POWER_LEVEL_MEDIUM = 1,

drivers/gpu/drm/radeon/si_dpm.c

@@ -3396,6 +3396,15 @@ static int si_process_firmware_header(struct radeon_device *rdev)
 
 	si_pi->mc_reg_table_start = tmp;
 
+	ret = si_read_smc_sram_dword(rdev,
+				     SISLANDS_SMC_FIRMWARE_HEADER_LOCATION +
+				     SISLANDS_SMC_FIRMWARE_HEADER_fanTable,
+				     &tmp, si_pi->sram_end);
+	if (ret)
+		return ret;
+
+	si_pi->fan_table_start = tmp;
+
 	ret = si_read_smc_sram_dword(rdev,
 				     SISLANDS_SMC_FIRMWARE_HEADER_LOCATION +
 				     SISLANDS_SMC_FIRMWARE_HEADER_mcArbDramAutoRefreshTable,
@@ -5825,19 +5834,19 @@ static int si_thermal_enable_alert(struct radeon_device *rdev,
 	if (enable) {
 		PPSMC_Result result;
 
-		thermal_int |= THERM_INT_MASK_HIGH | THERM_INT_MASK_LOW;
-		rdev->irq.dpm_thermal = true;
+		thermal_int &= ~(THERM_INT_MASK_HIGH | THERM_INT_MASK_LOW);
+		WREG32(CG_THERMAL_INT, thermal_int);
+		rdev->irq.dpm_thermal = false;
 		result = si_send_msg_to_smc(rdev, PPSMC_MSG_EnableThermalInterrupt);
 		if (result != PPSMC_Result_OK) {
 			DRM_DEBUG_KMS("Could not enable thermal interrupts.\n");
 			return -EINVAL;
 		}
 	} else {
-		thermal_int &= ~(THERM_INT_MASK_HIGH | THERM_INT_MASK_LOW);
-		rdev->irq.dpm_thermal = false;
-	}
-
+		thermal_int |= THERM_INT_MASK_HIGH | THERM_INT_MASK_LOW;
 		WREG32(CG_THERMAL_INT, thermal_int);
+		rdev->irq.dpm_thermal = true;
+	}
 
 	return 0;
 }
@@ -5867,6 +5876,309 @@ static int si_thermal_set_temperature_range(struct radeon_device *rdev,
 	return 0;
 }
 
+static void si_fan_ctrl_set_static_mode(struct radeon_device *rdev, u32 mode)
+{
+	struct si_power_info *si_pi = si_get_pi(rdev);
+	u32 tmp;
+
+	if (si_pi->fan_ctrl_is_in_default_mode) {
+		tmp = (RREG32(CG_FDO_CTRL2) & FDO_PWM_MODE_MASK) >> FDO_PWM_MODE_SHIFT;
+		si_pi->fan_ctrl_default_mode = tmp;
+		tmp = (RREG32(CG_FDO_CTRL2) & TMIN_MASK) >> TMIN_SHIFT;
+		si_pi->t_min = tmp;
+		si_pi->fan_ctrl_is_in_default_mode = false;
+	}
+
+	tmp = RREG32(CG_FDO_CTRL2) & ~TMIN_MASK;
+	tmp |= TMIN(0);
+	WREG32(CG_FDO_CTRL2, tmp);
+
+	tmp = RREG32(CG_FDO_CTRL2) & FDO_PWM_MODE_MASK;
+	tmp |= FDO_PWM_MODE(mode);
+	WREG32(CG_FDO_CTRL2, tmp);
+}
+
+static int si_thermal_setup_fan_table(struct radeon_device *rdev)
+{
+	struct si_power_info *si_pi = si_get_pi(rdev);
+	PP_SIslands_FanTable fan_table = { FDO_MODE_HARDWARE };
+	u32 duty100;
+	u32 t_diff1, t_diff2, pwm_diff1, pwm_diff2;
+	u16 fdo_min, slope1, slope2;
+	u32 reference_clock, tmp;
+	int ret;
+	u64 tmp64;
+
+	if (!si_pi->fan_table_start) {
+		rdev->pm.dpm.fan.ucode_fan_control = false;
+		return 0;
+	}
+
+	duty100 = (RREG32(CG_FDO_CTRL1) & FMAX_DUTY100_MASK) >> FMAX_DUTY100_SHIFT;
+
+	if (duty100 == 0) {
+		rdev->pm.dpm.fan.ucode_fan_control = false;
+		return 0;
+	}
+
+	tmp64 = (u64)rdev->pm.dpm.fan.pwm_min * duty100;
+	do_div(tmp64, 10000);
+	fdo_min = (u16)tmp64;
+
+	t_diff1 = rdev->pm.dpm.fan.t_med - rdev->pm.dpm.fan.t_min;
+	t_diff2 = rdev->pm.dpm.fan.t_high - rdev->pm.dpm.fan.t_med;
+
+	pwm_diff1 = rdev->pm.dpm.fan.pwm_med - rdev->pm.dpm.fan.pwm_min;
+	pwm_diff2 = rdev->pm.dpm.fan.pwm_high - rdev->pm.dpm.fan.pwm_med;
+
+	slope1 = (u16)((50 + ((16 * duty100 * pwm_diff1) / t_diff1)) / 100);
+	slope2 = (u16)((50 + ((16 * duty100 * pwm_diff2) / t_diff2)) / 100);
+
+	fan_table.slope1 = cpu_to_be16(slope1);
+	fan_table.slope2 = cpu_to_be16(slope2);
+
+	fan_table.fdo_min = cpu_to_be16(fdo_min);
+
+	fan_table.hys_down = cpu_to_be16(rdev->pm.dpm.fan.t_hyst);
+
+	fan_table.hys_up = cpu_to_be16(1);
+
+	fan_table.hys_slope = cpu_to_be16(1);
+
+	fan_table.temp_resp_lim = cpu_to_be16(5);
+
+	reference_clock = radeon_get_xclk(rdev);
+
+	fan_table.refresh_period = cpu_to_be32((rdev->pm.dpm.fan.cycle_delay *
+						reference_clock) / 1600);
+
+	fan_table.fdo_max = cpu_to_be16((u16)duty100);
+
+	tmp = (RREG32(CG_MULT_THERMAL_CTRL) & TEMP_SEL_MASK) >> TEMP_SEL_SHIFT;
+	fan_table.temp_src = (uint8_t)tmp;
+
+	ret = si_copy_bytes_to_smc(rdev,
+				   si_pi->fan_table_start,
+				   (u8 *)(&fan_table),
+				   sizeof(fan_table),
+				   si_pi->sram_end);
+
+	if (ret) {
+		DRM_ERROR("Failed to load fan table to the SMC.");
+		rdev->pm.dpm.fan.ucode_fan_control = false;
+	}
+
+	return 0;
+}
+
+static int si_fan_ctrl_start_smc_fan_control(struct radeon_device *rdev)
+{
+	PPSMC_Result ret;
+
+	ret = si_send_msg_to_smc(rdev, PPSMC_StartFanControl);
+	if (ret == PPSMC_Result_OK)
+		return 0;
+	else
+		return -EINVAL;
+}
+
+static int si_fan_ctrl_stop_smc_fan_control(struct radeon_device *rdev)
+{
+	PPSMC_Result ret;
+
+	ret = si_send_msg_to_smc(rdev, PPSMC_StopFanControl);
+	if (ret == PPSMC_Result_OK)
+		return 0;
+	else
+		return -EINVAL;
+}
+
+#if 0
+static int si_fan_ctrl_get_fan_speed_percent(struct radeon_device *rdev,
+					     u32 *speed)
+{
+	u32 duty, duty100;
+	u64 tmp64;
+
+	if (rdev->pm.no_fan)
+		return -ENOENT;
+
+	duty100 = (RREG32(CG_FDO_CTRL1) & FMAX_DUTY100_MASK) >> FMAX_DUTY100_SHIFT;
+	duty = (RREG32(CG_THERMAL_STATUS) & FDO_PWM_DUTY_MASK) >> FDO_PWM_DUTY_SHIFT;
+
+	if (duty100 == 0)
+		return -EINVAL;
+
+	tmp64 = (u64)duty * 100;
+	do_div(tmp64, duty100);
+	*speed = (u32)tmp64;
+
+	if (*speed > 100)
+		*speed = 100;
+
+	return 0;
+}
+
+static int si_fan_ctrl_set_fan_speed_percent(struct radeon_device *rdev,
+					     u32 speed)
+{
+	u32 tmp;
+	u32 duty, duty100;
+	u64 tmp64;
+
+	if (rdev->pm.no_fan)
+		return -ENOENT;
+
+	if (speed > 100)
+		return -EINVAL;
+
+	if (rdev->pm.dpm.fan.ucode_fan_control)
+		si_fan_ctrl_stop_smc_fan_control(rdev);
+
+	duty100 = (RREG32(CG_FDO_CTRL1) & FMAX_DUTY100_MASK) >> FMAX_DUTY100_SHIFT;
+
+	if (duty100 == 0)
+		return -EINVAL;
+
+	tmp64 = (u64)speed * duty100;
+	do_div(tmp64, 100);
+	duty = (u32)tmp64;
+
+	tmp = RREG32(CG_FDO_CTRL0) & ~FDO_STATIC_DUTY_MASK;
+	tmp |= FDO_STATIC_DUTY(duty);
+	WREG32(CG_FDO_CTRL0, tmp);
+
+	si_fan_ctrl_set_static_mode(rdev, FDO_PWM_MODE_STATIC);
+
+	return 0;
+}
+
+static int si_fan_ctrl_get_fan_speed_rpm(struct radeon_device *rdev,
+					 u32 *speed)
+{
+	u32 tach_period;
+	u32 xclk = radeon_get_xclk(rdev);
+
+	if (rdev->pm.no_fan)
+		return -ENOENT;
+
+	if (rdev->pm.fan_pulses_per_revolution == 0)
+		return -ENOENT;
+
+	tach_period = (RREG32(CG_TACH_STATUS) & TACH_PERIOD_MASK) >> TACH_PERIOD_SHIFT;
+	if (tach_period == 0)
+		return -ENOENT;
+
+	*speed = 60 * xclk * 10000 / tach_period;
+
+	return 0;
+}
+
+static int si_fan_ctrl_set_fan_speed_rpm(struct radeon_device *rdev,
+					 u32 speed)
+{
+	u32 tach_period, tmp;
+	u32 xclk = radeon_get_xclk(rdev);
+
+	if (rdev->pm.no_fan)
+		return -ENOENT;
+
+	if (rdev->pm.fan_pulses_per_revolution == 0)
+		return -ENOENT;
+
+	if ((speed < rdev->pm.fan_min_rpm) ||
+	    (speed > rdev->pm.fan_max_rpm))
+		return -EINVAL;
+
+	if (rdev->pm.dpm.fan.ucode_fan_control)
+		si_fan_ctrl_stop_smc_fan_control(rdev);
+
+	tach_period = 60 * xclk * 10000 / (8 * speed);
+	tmp = RREG32(CG_TACH_CTRL) & ~TARGET_PERIOD_MASK;
+	tmp |= TARGET_PERIOD(tach_period);
+	WREG32(CG_TACH_CTRL, tmp);
+
+	si_fan_ctrl_set_static_mode(rdev, FDO_PWM_MODE_STATIC);
+
+	return 0;
+}
+#endif
+
+static void si_fan_ctrl_set_default_mode(struct radeon_device *rdev)
+{
+	struct si_power_info *si_pi = si_get_pi(rdev);
+	u32 tmp;
+
+	if (!si_pi->fan_ctrl_is_in_default_mode) {
+		tmp = RREG32(CG_FDO_CTRL2) & ~FDO_PWM_MODE_MASK;
+		tmp |= FDO_PWM_MODE(si_pi->fan_ctrl_default_mode);
+		WREG32(CG_FDO_CTRL2, tmp);
+
+		tmp = RREG32(CG_FDO_CTRL2) & TMIN_MASK;
+		tmp |= TMIN(si_pi->t_min);
+		WREG32(CG_FDO_CTRL2, tmp);
+		si_pi->fan_ctrl_is_in_default_mode = true;
+	}
+}
+
+static void si_thermal_start_smc_fan_control(struct radeon_device *rdev)
+{
+	if (rdev->pm.dpm.fan.ucode_fan_control) {
+		si_fan_ctrl_start_smc_fan_control(rdev);
+		si_fan_ctrl_set_static_mode(rdev, FDO_PWM_MODE_STATIC);
+	}
+}
+
+static void si_thermal_initialize(struct radeon_device *rdev)
+{
+	u32 tmp;
+
+	if (rdev->pm.fan_pulses_per_revolution) {
+		tmp = RREG32(CG_TACH_CTRL) & ~EDGE_PER_REV_MASK;
+		tmp |= EDGE_PER_REV(rdev->pm.fan_pulses_per_revolution -1);
+		WREG32(CG_TACH_CTRL, tmp);
+	}
+
+	tmp = RREG32(CG_FDO_CTRL2) & ~TACH_PWM_RESP_RATE_MASK;
+	tmp |= TACH_PWM_RESP_RATE(0x28);
+	WREG32(CG_FDO_CTRL2, tmp);
+}
+
+static int si_thermal_start_thermal_controller(struct radeon_device *rdev)
+{
+	int ret;
+
+	si_thermal_initialize(rdev);
+	ret = si_thermal_set_temperature_range(rdev, R600_TEMP_RANGE_MIN, R600_TEMP_RANGE_MAX);
+	if (ret)
+		return ret;
+	ret = si_thermal_enable_alert(rdev, true);
+	if (ret)
+		return ret;
+	if (rdev->pm.dpm.fan.ucode_fan_control) {
+		ret = si_halt_smc(rdev);
+		if (ret)
+			return ret;
+		ret = si_thermal_setup_fan_table(rdev);
+		if (ret)
+			return ret;
+		ret = si_resume_smc(rdev);
+		if (ret)
+			return ret;
+		si_thermal_start_smc_fan_control(rdev);
+	}
+
+	return 0;
+}
+
+static void si_thermal_stop_thermal_controller(struct radeon_device *rdev)
+{
+	if (!rdev->pm.no_fan) {
+		si_fan_ctrl_set_default_mode(rdev);
+		si_fan_ctrl_stop_smc_fan_control(rdev);
+	}
+}
+
 int si_dpm_enable(struct radeon_device *rdev)
 {
 	struct rv7xx_power_info *pi = rv770_get_pi(rdev);
@@ -5979,6 +6291,8 @@ int si_dpm_enable(struct radeon_device *rdev)
 
 	si_enable_auto_throttle_source(rdev, RADEON_DPM_AUTO_THROTTLE_SRC_THERMAL, true);
 
+	si_thermal_start_thermal_controller(rdev);
+
 	ni_update_current_ps(rdev, boot_ps);
 
 	return 0;
@@ -6019,6 +6333,7 @@ void si_dpm_disable(struct radeon_device *rdev)
 
 	if (!si_is_smc_running(rdev))
 		return;
+	si_thermal_stop_thermal_controller(rdev);
 	si_disable_ulv(rdev);
 	si_clear_vc(rdev);
 	if (pi->thermal_protection)
@@ -6557,6 +6872,9 @@ int si_dpm_init(struct radeon_device *rdev)
 		rdev->pm.dpm.dyn_state.max_clock_voltage_on_dc =
 			rdev->pm.dpm.dyn_state.max_clock_voltage_on_ac;
 
+	si_pi->fan_ctrl_is_in_default_mode = true;
+	rdev->pm.dpm.fan.ucode_fan_control = false;
+
 	return 0;
 }
 

drivers/gpu/drm/radeon/si_dpm.h

@@ -182,6 +182,7 @@ struct si_power_info {
 	u32 dte_table_start;
 	u32 spll_table_start;
 	u32 papm_cfg_table_start;
+	u32 fan_table_start;
 	/* CAC stuff */
 	const struct si_cac_config_reg *cac_weights;
 	const struct si_cac_config_reg *lcac_config;
@@ -197,6 +198,10 @@ struct si_power_info {
 	/* SVI2 */
 	u8 svd_gpio_id;
 	u8 svc_gpio_id;
+	/* fan control */
+	bool fan_ctrl_is_in_default_mode;
+	u32 t_min;
+	u32 fan_ctrl_default_mode;
 };
 
 #define SISLANDS_INITIAL_STATE_ARB_INDEX    0

drivers/gpu/drm/radeon/sid.h

@@ -180,7 +180,10 @@
 #define		DIG_THERM_DPM(x)			((x) << 14)
 #define		DIG_THERM_DPM_MASK			0x003FC000
 #define		DIG_THERM_DPM_SHIFT			14
-
+#define	CG_THERMAL_STATUS				0x704
+#define		FDO_PWM_DUTY(x)				((x) << 9)
+#define		FDO_PWM_DUTY_MASK			(0xff << 9)
+#define		FDO_PWM_DUTY_SHIFT			9
 #define	CG_THERMAL_INT					0x708
 #define		DIG_THERM_INTH(x)			((x) << 8)
 #define		DIG_THERM_INTH_MASK			0x0000FF00
@@ -191,6 +194,10 @@
 #define 	THERM_INT_MASK_HIGH			(1 << 24)
 #define 	THERM_INT_MASK_LOW			(1 << 25)
 
+#define	CG_MULT_THERMAL_CTRL					0x710
+#define		TEMP_SEL(x)					((x) << 20)
+#define		TEMP_SEL_MASK					(0xff << 20)
+#define		TEMP_SEL_SHIFT					20
 #define	CG_MULT_THERMAL_STATUS					0x714
 #define		ASIC_MAX_TEMP(x)				((x) << 0)
 #define		ASIC_MAX_TEMP_MASK				0x000001ff
@@ -199,6 +206,37 @@
 #define		CTF_TEMP_MASK					0x0003fe00
 #define		CTF_TEMP_SHIFT					9
 
+#define	CG_FDO_CTRL0					0x754
+#define		FDO_STATIC_DUTY(x)			((x) << 0)
+#define		FDO_STATIC_DUTY_MASK			0x0000000F
+#define		FDO_STATIC_DUTY_SHIFT			0
+#define	CG_FDO_CTRL1					0x758
+#define		FMAX_DUTY100(x)				((x) << 0)
+#define		FMAX_DUTY100_MASK			0x0000000F
+#define		FMAX_DUTY100_SHIFT			0
+#define	CG_FDO_CTRL2					0x75C
+#define		TMIN(x)					((x) << 0)
+#define		TMIN_MASK				0x0000000F
+#define		TMIN_SHIFT				0
+#define		FDO_PWM_MODE(x)				((x) << 11)
+#define		FDO_PWM_MODE_MASK			(3 << 11)
+#define		FDO_PWM_MODE_SHIFT			11
+#define		TACH_PWM_RESP_RATE(x)			((x) << 25)
+#define		TACH_PWM_RESP_RATE_MASK			(0x7f << 25)
+#define		TACH_PWM_RESP_RATE_SHIFT		25
+
+#define CG_TACH_CTRL                                    0x770
+#       define EDGE_PER_REV(x)                          ((x) << 0)
+#       define EDGE_PER_REV_MASK                        (0x7 << 0)
+#       define EDGE_PER_REV_SHIFT                       0
+#       define TARGET_PERIOD(x)                         ((x) << 3)
+#       define TARGET_PERIOD_MASK                       0xfffffff8
+#       define TARGET_PERIOD_SHIFT                      3
+#define CG_TACH_STATUS                                  0x774
+#       define TACH_PERIOD(x)                           ((x) << 0)
+#       define TACH_PERIOD_MASK                         0xffffffff
+#       define TACH_PERIOD_SHIFT                        0
+
 #define GENERAL_PWRMGT                                  0x780
 #       define GLOBAL_PWRMGT_EN                         (1 << 0)
 #       define STATIC_PM_EN                             (1 << 1)

drivers/gpu/drm/radeon/sislands_smc.h

@@ -245,6 +245,31 @@ typedef struct SISLANDS_SMC_STATETABLE SISLANDS_SMC_STATETABLE;
 #define SI_SMC_SOFT_REGISTER_svi_rework_gpio_id_svd   0x11c
 #define SI_SMC_SOFT_REGISTER_svi_rework_gpio_id_svc   0x120
 
+struct PP_SIslands_FanTable
+{
+	uint8_t  fdo_mode;
+	uint8_t  padding;
+	int16_t  temp_min;
+	int16_t  temp_med;
+	int16_t  temp_max;
+	int16_t  slope1;
+	int16_t  slope2;
+	int16_t  fdo_min;
+	int16_t  hys_up;
+	int16_t  hys_down;
+	int16_t  hys_slope;
+	int16_t  temp_resp_lim;
+	int16_t  temp_curr;
+	int16_t  slope_curr;
+	int16_t  pwm_curr;
+	uint32_t refresh_period;
+	int16_t  fdo_max;
+	uint8_t  temp_src;
+	int8_t  padding2;
+};
+
+typedef struct PP_SIslands_FanTable PP_SIslands_FanTable;
+
 #define SMC_SISLANDS_LKGE_LUT_NUM_OF_TEMP_ENTRIES 16
 #define SMC_SISLANDS_LKGE_LUT_NUM_OF_VOLT_ENTRIES 32