usb: add Freescale QE/CPM USB peripheral controller driver

Some of Freescale SoC chips have a QE or CPM co-processor which
supports full speed USB.  The driver adds device mode support
of both QE and CPM USB controller to Linux USB gadget.  The
driver is tested with MPC8360 and MPC8272, and should work with
other models having QE/CPM given minor tweaks.
Signed-off-by: Xie Xiaobo <X.Xie@freescale.com>
Signed-off-by: Li Yang <leoli@freescale.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Cc: David Brownell <david-b@pacbell.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

drivers/usb/gadget/Kconfig

@@ -341,6 +341,25 @@ config USB_AMD5536UDC
 	default USB_GADGET
 	select USB_GADGET_SELECTED
 
+config USB_GADGET_FSL_QE
+	boolean "Freescale QE/CPM USB Device Controller"
+	depends on FSL_SOC && (QUICC_ENGINE || CPM)
+	help
+	   Some of Freescale PowerPC processors have a Full Speed
+	   QE/CPM2 USB controller, which support device mode with 4
+	   programmable endpoints. This driver supports the
+	   controller in the MPC8360 and MPC8272, and should work with
+	   controllers having QE or CPM2, given minor tweaks.
+
+	   Set CONFIG_USB_GADGET to "m" to build this driver as a
+	   dynmically linked module called "fsl_qe_udc".
+
+config USB_FSL_QE
+	tristate
+	depends on USB_GADGET_FSL_QE
+	default USB_GADGET
+	select USB_GADGET_SELECTED
+
 config USB_GADGET_NET2280
 	boolean "NetChip 228x"
 	depends on PCI

drivers/usb/gadget/Makefile

@@ -18,6 +18,7 @@ obj-$(CONFIG_USB_AT91)		+= at91_udc.o
 obj-$(CONFIG_USB_ATMEL_USBA)	+= atmel_usba_udc.o
 obj-$(CONFIG_USB_FSL_USB2)	+= fsl_usb2_udc.o
 obj-$(CONFIG_USB_M66592)	+= m66592-udc.o
+obj-$(CONFIG_USB_FSL_QE)	+= fsl_qe_udc.o
 
 #
 # USB gadget drivers

drivers/usb/gadget/gadget_chips.h

@@ -151,6 +151,13 @@
 #define	gadget_is_m66592(g)	0
 #endif
 
+/* Freescale CPM/QE UDC SUPPORT */
+#ifdef CONFIG_USB_GADGET_FSL_QE
+#define gadget_is_fsl_qe(g)	!strcmp("fsl_qe_udc", (g)->name)
+#else
+#define gadget_is_fsl_qe(g)	0
+#endif
+
 
 // CONFIG_USB_GADGET_SX2
 // CONFIG_USB_GADGET_AU1X00
@@ -216,6 +223,8 @@ static inline int usb_gadget_controller_number(struct usb_gadget *gadget)
 		return 0x20;
 	else if (gadget_is_m66592(gadget))
 		return 0x21;
+	else if (gadget_is_fsl_qe(gadget))
+		return 0x22;
 	return -ENOENT;
 }