Merge branch 'unnecessary_break'

Fabian Frederick says:

====================
drivers/net: remove unnecessary break after goto

Small patchset addressing break redundancy on drivers/net branch
(suggested by Joe Perches).

V2: cc to maintainers of each section.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/ethernet/intel/i40e/i40e_lan_hmc.c

@@ -417,7 +417,6 @@ static i40e_status i40e_create_lan_hmc_object(struct i40e_hw *hw,
 			default:
 				ret_code = I40E_ERR_INVALID_SD_TYPE;
 				goto exit;
-				break;
 			}
 		}
 	}
@@ -502,7 +501,6 @@ i40e_status i40e_configure_lan_hmc(struct i40e_hw *hw,
 		hw_dbg(hw, "i40e_configure_lan_hmc: Unknown SD type: %d\n",
 			  ret_code);
 		goto configure_lan_hmc_out;
-		break;
 	}
 
 	/* Configure and program the FPM registers so objects can be created */

drivers/net/ethernet/intel/i40evf/i40evf_main.c

@@ -2013,7 +2013,6 @@ static void i40evf_init_task(struct work_struct *work)
 		}
 		adapter->state = __I40EVF_INIT_VERSION_CHECK;
 		goto restart;
-		break;
 	case __I40EVF_INIT_VERSION_CHECK:
 		if (!i40evf_asq_done(hw)) {
 			dev_err(&pdev->dev, "Admin queue command never completed\n");
@@ -2039,7 +2038,6 @@ static void i40evf_init_task(struct work_struct *work)
 		}
 		adapter->state = __I40EVF_INIT_GET_RESOURCES;
 		goto restart;
-		break;
 	case __I40EVF_INIT_GET_RESOURCES:
 		/* aq msg sent, awaiting reply */
 		if (!adapter->vf_res) {

drivers/net/ethernet/intel/igb/e1000_82575.c

@@ -837,7 +837,6 @@ static s32 igb_get_phy_id_82575(struct e1000_hw *hw)
 		default:
 			ret_val = -E1000_ERR_PHY;
 			goto out;
-			break;
 		}
 		ret_val = igb_get_phy_id(hw);
 		goto out;

drivers/net/ethernet/intel/ixgbe/ixgbe_82598.c

@@ -430,7 +430,6 @@ static s32 ixgbe_fc_enable_82598(struct ixgbe_hw *hw)
 		hw_dbg(hw, "Flow control param set incorrectly\n");
 		ret_val = IXGBE_ERR_CONFIG;
 		goto out;
-		break;
 	}
 
 	/* Set 802.3x based flow control settings. */

drivers/net/ethernet/intel/ixgbe/ixgbe_82599.c

@@ -432,7 +432,6 @@ static s32 ixgbe_get_link_capabilities_82599(struct ixgbe_hw *hw,
 	default:
 		status = IXGBE_ERR_LINK_SETUP;
 		goto out;
-		break;
 	}
 
 	if (hw->phy.multispeed_fiber) {
@@ -2035,7 +2034,6 @@ static u32 ixgbe_get_supported_physical_layer_82599(struct ixgbe_hw *hw)
 		else if (pma_pmd_10g_parallel == IXGBE_AUTOC_10G_XAUI)
 			physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_XAUI;
 		goto out;
-		break;
 	case IXGBE_AUTOC_LMS_10G_SERIAL:
 		if (pma_pmd_10g_serial == IXGBE_AUTOC2_10G_KR) {
 			physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_KR;
@@ -2052,10 +2050,8 @@ static u32 ixgbe_get_supported_physical_layer_82599(struct ixgbe_hw *hw)
 		if (autoc & IXGBE_AUTOC_KR_SUPP)
 			physical_layer |= IXGBE_PHYSICAL_LAYER_10GBASE_KR;
 		goto out;
-		break;
 	default:
 		goto out;
-		break;
 	}
 
 sfp_check:

drivers/net/ethernet/intel/ixgbe/ixgbe_common.c

@@ -216,7 +216,6 @@ static s32 ixgbe_setup_fc(struct ixgbe_hw *hw)
 		hw_dbg(hw, "Flow control param set incorrectly\n");
 		ret_val = IXGBE_ERR_CONFIG;
 		goto out;
-		break;
 	}
 
 	if (hw->mac.type != ixgbe_mac_X540) {
@@ -2179,7 +2178,6 @@ s32 ixgbe_fc_enable_generic(struct ixgbe_hw *hw)
 		hw_dbg(hw, "Flow control param set incorrectly\n");
 		ret_val = IXGBE_ERR_CONFIG;
 		goto out;
-		break;
 	}
 
 	/* Set 802.3x based flow control settings. */

drivers/net/ethernet/toshiba/ps3_gelic_wireless.c

@@ -723,13 +723,10 @@ static int gelic_wl_get_scan(struct net_device *netdev,
 		/* If a scan in progress, caller should call me again */
 		ret = -EAGAIN;
 		goto out;
-		break;
-
 	case GELIC_WL_SCAN_STAT_INIT:
 		/* last scan request failed or never issued */
 		ret = -ENODEV;
 		goto out;
-		break;
 	case GELIC_WL_SCAN_STAT_GOT_LIST:
 		/* ok, use current list */
 		break;

drivers/net/slip/slhc.c

@@ -396,7 +396,6 @@ slhc_compress(struct slcompress *comp, unsigned char *icp, int isize,
 		   ntohs(cs->cs_ip.tot_len) == hlen)
 			break;
 		goto uncompressed;
-		break;
 	case SPECIAL_I:
 	case SPECIAL_D:
 		/* actual changes match one of our special case encodings --

drivers/net/wireless/ath/wcn36xx/main.c

@@ -488,7 +488,6 @@ static int wcn36xx_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd,
 		wcn36xx_err("Unsupported key cmd 0x%x\n", cmd);
 		ret = -EOPNOTSUPP;
 		goto out;
-		break;
 	}
 
 out:

drivers/net/wireless/orinoco/orinoco_usb.c

@@ -921,7 +921,6 @@ static int ezusb_access_ltv(struct ezusb_priv *upriv,
 			retval = -EFAULT;
 		}
 		goto exit;
-		break;
 	}
 	if (ctx->in_rid) {
 		struct ezusb_packet *ans = ctx->buf;

drivers/net/wireless/rtlwifi/rtl8192se/fw.c

@@ -438,7 +438,6 @@ int rtl92s_download_fw(struct ieee80211_hw *hw)
 			RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
 				 "Unexpected Download step!!\n");
 			goto fail;
-			break;
 		}
 
 		/* <2> Download image file */