Commit 39b91eb4 authored by Minda Chen's avatar Minda Chen Committed by Bjorn Helgaas

PCI: starfive: Add JH7110 PCIe controller

Add StarFive JH7110 SoC PCIe controller platform driver code, JH7110
with PLDA host PCIe core.

Link: https://lore.kernel.org/linux-pci/20240328091835.14797-22-minda.chen@starfivetech.comCo-developed-by: default avatarKevin Xie <kevin.xie@starfivetech.com>
Signed-off-by: default avatarMinda Chen <minda.chen@starfivetech.com>
Signed-off-by: default avatarKrzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: default avatarBjorn Helgaas <bhelgaas@google.com>
Reviewed-by: default avatarMason Huo <mason.huo@starfivetech.com>
parent 22fe3223
...@@ -17492,6 +17492,7 @@ M: Kevin Xie <kevin.xie@starfivetech.com> ...@@ -17492,6 +17492,7 @@ M: Kevin Xie <kevin.xie@starfivetech.com>
L: linux-pci@vger.kernel.org L: linux-pci@vger.kernel.org
S: Maintained S: Maintained
F: Documentation/devicetree/bindings/pci/starfive,jh7110-pcie.yaml F: Documentation/devicetree/bindings/pci/starfive,jh7110-pcie.yaml
F: drivers/pci/controller/plda/pcie-starfive.c
PCIE ENDPOINT DRIVER FOR QUALCOMM PCIE ENDPOINT DRIVER FOR QUALCOMM
M: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> M: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
......
...@@ -15,4 +15,16 @@ config PCIE_MICROCHIP_HOST ...@@ -15,4 +15,16 @@ config PCIE_MICROCHIP_HOST
Say Y here if you want kernel to support the Microchip AXI PCIe Say Y here if you want kernel to support the Microchip AXI PCIe
Host Bridge driver. Host Bridge driver.
config PCIE_STARFIVE_HOST
tristate "StarFive PCIe host controller"
depends on PCI_MSI && OF
depends on ARCH_STARFIVE || COMPILE_TEST
select PCIE_PLDA_HOST
help
Say Y here if you want to support the StarFive PCIe controller in
host mode. StarFive PCIe controller uses PLDA PCIe core.
If you choose to build this driver as module it will be dynamically
linked and module will be called pcie-starfive.ko.
endmenu endmenu
# SPDX-License-Identifier: GPL-2.0 # SPDX-License-Identifier: GPL-2.0
obj-$(CONFIG_PCIE_PLDA_HOST) += pcie-plda-host.o obj-$(CONFIG_PCIE_PLDA_HOST) += pcie-plda-host.o
obj-$(CONFIG_PCIE_MICROCHIP_HOST) += pcie-microchip-host.o obj-$(CONFIG_PCIE_MICROCHIP_HOST) += pcie-microchip-host.o
obj-$(CONFIG_PCIE_STARFIVE_HOST) += pcie-starfive.o
...@@ -10,10 +10,20 @@ ...@@ -10,10 +10,20 @@
#define PLDA_MAX_NUM_MSI_IRQS 32 #define PLDA_MAX_NUM_MSI_IRQS 32
/* PCIe Bridge Phy Regs */ /* PCIe Bridge Phy Regs */
#define GEN_SETTINGS 0x80
#define RP_ENABLE 1
#define PCIE_PCI_IDS_DW1 0x9c
#define IDS_CLASS_CODE_SHIFT 16
#define REVISION_ID_MASK GENMASK(7, 0)
#define CLASS_CODE_ID_MASK GENMASK(31, 8)
#define PCIE_PCI_IRQ_DW0 0xa8 #define PCIE_PCI_IRQ_DW0 0xa8
#define MSIX_CAP_MASK BIT(31) #define MSIX_CAP_MASK BIT(31)
#define NUM_MSI_MSGS_MASK GENMASK(6, 4) #define NUM_MSI_MSGS_MASK GENMASK(6, 4)
#define NUM_MSI_MSGS_SHIFT 4 #define NUM_MSI_MSGS_SHIFT 4
#define PCI_MISC 0xb4
#define PHY_FUNCTION_DIS BIT(15)
#define PCIE_WINROM 0xfc
#define PREF_MEM_WIN_64_SUPPORT BIT(3)
#define IMASK_LOCAL 0x180 #define IMASK_LOCAL 0x180
#define DMA_END_ENGINE_0_MASK 0x00000000u #define DMA_END_ENGINE_0_MASK 0x00000000u
...@@ -65,6 +75,8 @@ ...@@ -65,6 +75,8 @@
#define ISTATUS_HOST 0x18c #define ISTATUS_HOST 0x18c
#define IMSI_ADDR 0x190 #define IMSI_ADDR 0x190
#define ISTATUS_MSI 0x194 #define ISTATUS_MSI 0x194
#define PMSG_SUPPORT_RX 0x3f0
#define PMSG_LTR_SUPPORT BIT(2)
/* PCIe Master table init defines */ /* PCIe Master table init defines */
#define ATR0_PCIE_WIN0_SRCADDR_PARAM 0x600u #define ATR0_PCIE_WIN0_SRCADDR_PARAM 0x600u
...@@ -86,6 +98,8 @@ ...@@ -86,6 +98,8 @@
#define PCIE_TX_RX_INTERFACE 0x00000000u #define PCIE_TX_RX_INTERFACE 0x00000000u
#define PCIE_CONFIG_INTERFACE 0x00000001u #define PCIE_CONFIG_INTERFACE 0x00000001u
#define CONFIG_SPACE_ADDR_OFFSET 0x1000u
#define ATR_ENTRY_SIZE 32 #define ATR_ENTRY_SIZE 32
enum plda_int_event { enum plda_int_event {
...@@ -201,4 +215,59 @@ static inline void plda_set_default_msi(struct plda_msi *msi) ...@@ -201,4 +215,59 @@ static inline void plda_set_default_msi(struct plda_msi *msi)
msi->vector_phy = IMSI_ADDR; msi->vector_phy = IMSI_ADDR;
msi->num_vectors = PLDA_MAX_NUM_MSI_IRQS; msi->num_vectors = PLDA_MAX_NUM_MSI_IRQS;
} }
#endif
static inline void plda_pcie_enable_root_port(struct plda_pcie_rp *plda)
{
u32 value;
value = readl_relaxed(plda->bridge_addr + GEN_SETTINGS);
value |= RP_ENABLE;
writel_relaxed(value, plda->bridge_addr + GEN_SETTINGS);
}
static inline void plda_pcie_set_standard_class(struct plda_pcie_rp *plda)
{
u32 value;
/* set class code and reserve revision id */
value = readl_relaxed(plda->bridge_addr + PCIE_PCI_IDS_DW1);
value &= REVISION_ID_MASK;
value |= (PCI_CLASS_BRIDGE_PCI << IDS_CLASS_CODE_SHIFT);
writel_relaxed(value, plda->bridge_addr + PCIE_PCI_IDS_DW1);
}
static inline void plda_pcie_set_pref_win_64bit(struct plda_pcie_rp *plda)
{
u32 value;
value = readl_relaxed(plda->bridge_addr + PCIE_WINROM);
value |= PREF_MEM_WIN_64_SUPPORT;
writel_relaxed(value, plda->bridge_addr + PCIE_WINROM);
}
static inline void plda_pcie_disable_ltr(struct plda_pcie_rp *plda)
{
u32 value;
value = readl_relaxed(plda->bridge_addr + PMSG_SUPPORT_RX);
value &= ~PMSG_LTR_SUPPORT;
writel_relaxed(value, plda->bridge_addr + PMSG_SUPPORT_RX);
}
static inline void plda_pcie_disable_func(struct plda_pcie_rp *plda)
{
u32 value;
value = readl_relaxed(plda->bridge_addr + PCI_MISC);
value |= PHY_FUNCTION_DIS;
writel_relaxed(value, plda->bridge_addr + PCI_MISC);
}
static inline void plda_pcie_write_rc_bar(struct plda_pcie_rp *plda, u64 val)
{
void __iomem *addr = plda->bridge_addr + CONFIG_SPACE_ADDR_OFFSET;
writel_relaxed(lower_32_bits(val), addr + PCI_BASE_ADDRESS_0);
writel_relaxed(upper_32_bits(val), addr + PCI_BASE_ADDRESS_1);
}
#endif /* _PCIE_PLDA_H */
// SPDX-License-Identifier: GPL-2.0+
/*
* PCIe host controller driver for StarFive JH7110 Soc.
*
* Copyright (C) 2023 StarFive Technology Co., Ltd.
*/
#include <linux/bitfield.h>
#include <linux/clk.h>
#include <linux/delay.h>
#include <linux/gpio/consumer.h>
#include <linux/interrupt.h>
#include <linux/kernel.h>
#include <linux/mfd/syscon.h>
#include <linux/module.h>
#include <linux/of_address.h>
#include <linux/of_irq.h>
#include <linux/of_pci.h>
#include <linux/pci.h>
#include <linux/phy/phy.h>
#include <linux/platform_device.h>
#include <linux/pm_runtime.h>
#include <linux/regmap.h>
#include <linux/reset.h>
#include "../../pci.h"
#include "pcie-plda.h"
#define PCIE_FUNC_NUM 4
/* system control */
#define STG_SYSCON_PCIE0_BASE 0x48
#define STG_SYSCON_PCIE1_BASE 0x1f8
#define STG_SYSCON_AR_OFFSET 0x78
#define STG_SYSCON_AXI4_SLVL_AR_MASK GENMASK(22, 8)
#define STG_SYSCON_AXI4_SLVL_PHY_AR(x) FIELD_PREP(GENMASK(20, 17), x)
#define STG_SYSCON_AW_OFFSET 0x7c
#define STG_SYSCON_AXI4_SLVL_AW_MASK GENMASK(14, 0)
#define STG_SYSCON_AXI4_SLVL_PHY_AW(x) FIELD_PREP(GENMASK(12, 9), x)
#define STG_SYSCON_CLKREQ BIT(22)
#define STG_SYSCON_CKREF_SRC_MASK GENMASK(19, 18)
#define STG_SYSCON_RP_NEP_OFFSET 0xe8
#define STG_SYSCON_K_RP_NEP BIT(8)
#define STG_SYSCON_LNKSTA_OFFSET 0x170
#define DATA_LINK_ACTIVE BIT(5)
/* Parameters for the waiting for link up routine */
#define LINK_WAIT_MAX_RETRIES 10
#define LINK_WAIT_USLEEP_MIN 90000
#define LINK_WAIT_USLEEP_MAX 100000
struct starfive_jh7110_pcie {
struct plda_pcie_rp plda;
struct reset_control *resets;
struct clk_bulk_data *clks;
struct regmap *reg_syscon;
struct gpio_desc *power_gpio;
struct gpio_desc *reset_gpio;
struct phy *phy;
unsigned int stg_pcie_base;
int num_clks;
};
/*
* JH7110 PCIe port BAR0/1 can be configured as 64-bit prefetchable memory
* space. PCIe read and write requests targeting BAR0/1 are routed to so called
* 'Bridge Configuration space' in PLDA IP datasheet, which contains the bridge
* internal registers, such as interrupt, DMA and ATU registers...
* JH7110 can access the Bridge Configuration space by local bus, and don`t
* want the bridge internal registers accessed by the DMA from EP devices.
* Thus, they are unimplemented and should be hidden here.
*/
static bool starfive_pcie_hide_rc_bar(struct pci_bus *bus, unsigned int devfn,
int offset)
{
if (pci_is_root_bus(bus) && !devfn &&
(offset == PCI_BASE_ADDRESS_0 || offset == PCI_BASE_ADDRESS_1))
return true;
return false;
}
static int starfive_pcie_config_write(struct pci_bus *bus, unsigned int devfn,
int where, int size, u32 value)
{
if (starfive_pcie_hide_rc_bar(bus, devfn, where))
return PCIBIOS_SUCCESSFUL;
return pci_generic_config_write(bus, devfn, where, size, value);
}
static int starfive_pcie_config_read(struct pci_bus *bus, unsigned int devfn,
int where, int size, u32 *value)
{
if (starfive_pcie_hide_rc_bar(bus, devfn, where)) {
*value = 0;
return PCIBIOS_SUCCESSFUL;
}
return pci_generic_config_read(bus, devfn, where, size, value);
}
static int starfive_pcie_parse_dt(struct starfive_jh7110_pcie *pcie,
struct device *dev)
{
int domain_nr;
pcie->num_clks = devm_clk_bulk_get_all(dev, &pcie->clks);
if (pcie->num_clks < 0)
return dev_err_probe(dev, pcie->num_clks,
"failed to get pcie clocks\n");
pcie->resets = devm_reset_control_array_get_exclusive(dev);
if (IS_ERR(pcie->resets))
return dev_err_probe(dev, PTR_ERR(pcie->resets),
"failed to get pcie resets");
pcie->reg_syscon =
syscon_regmap_lookup_by_phandle(dev->of_node,
"starfive,stg-syscon");
if (IS_ERR(pcie->reg_syscon))
return dev_err_probe(dev, PTR_ERR(pcie->reg_syscon),
"failed to parse starfive,stg-syscon\n");
pcie->phy = devm_phy_optional_get(dev, NULL);
if (IS_ERR(pcie->phy))
return dev_err_probe(dev, PTR_ERR(pcie->phy),
"failed to get pcie phy\n");
/*
* The PCIe domain numbers are set to be static in JH7110 DTS.
* As the STG system controller defines different bases in PCIe RP0 &
* RP1, we use them to identify which controller is doing the hardware
* initialization.
*/
domain_nr = of_get_pci_domain_nr(dev->of_node);
if (domain_nr < 0 || domain_nr > 1)
return dev_err_probe(dev, -ENODEV,
"failed to get valid pcie domain\n");
if (domain_nr == 0)
pcie->stg_pcie_base = STG_SYSCON_PCIE0_BASE;
else
pcie->stg_pcie_base = STG_SYSCON_PCIE1_BASE;
pcie->reset_gpio = devm_gpiod_get_optional(dev, "perst",
GPIOD_OUT_HIGH);
if (IS_ERR(pcie->reset_gpio))
return dev_err_probe(dev, PTR_ERR(pcie->reset_gpio),
"failed to get perst-gpio\n");
pcie->power_gpio = devm_gpiod_get_optional(dev, "enable",
GPIOD_OUT_LOW);
if (IS_ERR(pcie->power_gpio))
return dev_err_probe(dev, PTR_ERR(pcie->power_gpio),
"failed to get power-gpio\n");
return 0;
}
static struct pci_ops starfive_pcie_ops = {
.map_bus = plda_pcie_map_bus,
.read = starfive_pcie_config_read,
.write = starfive_pcie_config_write,
};
static int starfive_pcie_clk_rst_init(struct starfive_jh7110_pcie *pcie)
{
struct device *dev = pcie->plda.dev;
int ret;
ret = clk_bulk_prepare_enable(pcie->num_clks, pcie->clks);
if (ret)
return dev_err_probe(dev, ret, "failed to enable clocks\n");
ret = reset_control_deassert(pcie->resets);
if (ret) {
clk_bulk_disable_unprepare(pcie->num_clks, pcie->clks);
dev_err_probe(dev, ret, "failed to deassert resets\n");
}
return ret;
}
static void starfive_pcie_clk_rst_deinit(struct starfive_jh7110_pcie *pcie)
{
reset_control_assert(pcie->resets);
clk_bulk_disable_unprepare(pcie->num_clks, pcie->clks);
}
static bool starfive_pcie_link_up(struct plda_pcie_rp *plda)
{
struct starfive_jh7110_pcie *pcie =
container_of(plda, struct starfive_jh7110_pcie, plda);
int ret;
u32 stg_reg_val;
ret = regmap_read(pcie->reg_syscon,
pcie->stg_pcie_base + STG_SYSCON_LNKSTA_OFFSET,
&stg_reg_val);
if (ret) {
dev_err(pcie->plda.dev, "failed to read link status\n");
return false;
}
return !!(stg_reg_val & DATA_LINK_ACTIVE);
}
static int starfive_pcie_host_wait_for_link(struct starfive_jh7110_pcie *pcie)
{
int retries;
/* Check if the link is up or not */
for (retries = 0; retries < LINK_WAIT_MAX_RETRIES; retries++) {
if (starfive_pcie_link_up(&pcie->plda)) {
dev_info(pcie->plda.dev, "port link up\n");
return 0;
}
usleep_range(LINK_WAIT_USLEEP_MIN, LINK_WAIT_USLEEP_MAX);
}
return -ETIMEDOUT;
}
static int starfive_pcie_enable_phy(struct device *dev,
struct starfive_jh7110_pcie *pcie)
{
int ret;
if (!pcie->phy)
return 0;
ret = phy_init(pcie->phy);
if (ret)
return dev_err_probe(dev, ret,
"failed to initialize pcie phy\n");
ret = phy_set_mode(pcie->phy, PHY_MODE_PCIE);
if (ret) {
dev_err_probe(dev, ret, "failed to set pcie mode\n");
goto err_phy_on;
}
ret = phy_power_on(pcie->phy);
if (ret) {
dev_err_probe(dev, ret, "failed to power on pcie phy\n");
goto err_phy_on;
}
return 0;
err_phy_on:
phy_exit(pcie->phy);
return ret;
}
static void starfive_pcie_disable_phy(struct starfive_jh7110_pcie *pcie)
{
phy_power_off(pcie->phy);
phy_exit(pcie->phy);
}
static void starfive_pcie_host_deinit(struct plda_pcie_rp *plda)
{
struct starfive_jh7110_pcie *pcie =
container_of(plda, struct starfive_jh7110_pcie, plda);
starfive_pcie_clk_rst_deinit(pcie);
if (pcie->power_gpio)
gpiod_set_value_cansleep(pcie->power_gpio, 0);
starfive_pcie_disable_phy(pcie);
}
static int starfive_pcie_host_init(struct plda_pcie_rp *plda)
{
struct starfive_jh7110_pcie *pcie =
container_of(plda, struct starfive_jh7110_pcie, plda);
struct device *dev = plda->dev;
int ret;
int i;
ret = starfive_pcie_enable_phy(dev, pcie);
if (ret)
return ret;
regmap_update_bits(pcie->reg_syscon,
pcie->stg_pcie_base + STG_SYSCON_RP_NEP_OFFSET,
STG_SYSCON_K_RP_NEP, STG_SYSCON_K_RP_NEP);
regmap_update_bits(pcie->reg_syscon,
pcie->stg_pcie_base + STG_SYSCON_AW_OFFSET,
STG_SYSCON_CKREF_SRC_MASK,
FIELD_PREP(STG_SYSCON_CKREF_SRC_MASK, 2));
regmap_update_bits(pcie->reg_syscon,
pcie->stg_pcie_base + STG_SYSCON_AW_OFFSET,
STG_SYSCON_CLKREQ, STG_SYSCON_CLKREQ);
ret = starfive_pcie_clk_rst_init(pcie);
if (ret)
return ret;
if (pcie->power_gpio)
gpiod_set_value_cansleep(pcie->power_gpio, 1);
if (pcie->reset_gpio)
gpiod_set_value_cansleep(pcie->reset_gpio, 1);
/* Disable physical functions except #0 */
for (i = 1; i < PCIE_FUNC_NUM; i++) {
regmap_update_bits(pcie->reg_syscon,
pcie->stg_pcie_base + STG_SYSCON_AR_OFFSET,
STG_SYSCON_AXI4_SLVL_AR_MASK,
STG_SYSCON_AXI4_SLVL_PHY_AR(i));
regmap_update_bits(pcie->reg_syscon,
pcie->stg_pcie_base + STG_SYSCON_AW_OFFSET,
STG_SYSCON_AXI4_SLVL_AW_MASK,
STG_SYSCON_AXI4_SLVL_PHY_AW(i));
plda_pcie_disable_func(plda);
}
regmap_update_bits(pcie->reg_syscon,
pcie->stg_pcie_base + STG_SYSCON_AR_OFFSET,
STG_SYSCON_AXI4_SLVL_AR_MASK, 0);
regmap_update_bits(pcie->reg_syscon,
pcie->stg_pcie_base + STG_SYSCON_AW_OFFSET,
STG_SYSCON_AXI4_SLVL_AW_MASK, 0);
plda_pcie_enable_root_port(plda);
plda_pcie_write_rc_bar(plda, 0);
/* PCIe PCI Standard Configuration Identification Settings. */
plda_pcie_set_standard_class(plda);
/*
* The LTR message receiving is enabled by the register "PCIe Message
* Reception" as default, but the forward id & addr are uninitialized.
* If we do not disable LTR message forwarding here, or set a legal
* forwarding address, the kernel will get stuck.
* To workaround, disable the LTR message forwarding here before using
* this feature.
*/
plda_pcie_disable_ltr(plda);
/*
* Enable the prefetchable memory window 64-bit addressing in JH7110.
* The 64-bits prefetchable address translation configurations in ATU
* can be work after enable the register setting below.
*/
plda_pcie_set_pref_win_64bit(plda);
/*
* Ensure that PERST has been asserted for at least 100 ms,
* the sleep value is T_PVPERL from PCIe CEM spec r2.0 (Table 2-4)
*/
msleep(100);
if (pcie->reset_gpio)
gpiod_set_value_cansleep(pcie->reset_gpio, 0);
/*
* With a Downstream Port (<=5GT/s), software must wait a minimum
* of 100ms following exit from a conventional reset before
* sending a configuration request to the device.
*/
msleep(PCIE_RESET_CONFIG_DEVICE_WAIT_MS);
if (starfive_pcie_host_wait_for_link(pcie))
dev_info(dev, "port link down\n");
return 0;
}
static const struct plda_pcie_host_ops sf_host_ops = {
.host_init = starfive_pcie_host_init,
.host_deinit = starfive_pcie_host_deinit,
};
static const struct plda_event stf_pcie_event = {
.intx_event = EVENT_PM_MSI_INT_INTX,
.msi_event = EVENT_PM_MSI_INT_MSI
};
static int starfive_pcie_probe(struct platform_device *pdev)
{
struct starfive_jh7110_pcie *pcie;
struct device *dev = &pdev->dev;
struct plda_pcie_rp *plda;
int ret;
pcie = devm_kzalloc(dev, sizeof(*pcie), GFP_KERNEL);
if (!pcie)
return -ENOMEM;
plda = &pcie->plda;
plda->dev = dev;
ret = starfive_pcie_parse_dt(pcie, dev);
if (ret)
return ret;
plda->host_ops = &sf_host_ops;
plda->num_events = PLDA_MAX_EVENT_NUM;
/* mask doorbell event */
plda->events_bitmap = GENMASK(PLDA_INT_EVENT_NUM - 1, 0)
& ~BIT(PLDA_AXI_DOORBELL)
& ~BIT(PLDA_PCIE_DOORBELL);
plda->events_bitmap <<= PLDA_NUM_DMA_EVENTS;
ret = plda_pcie_host_init(&pcie->plda, &starfive_pcie_ops,
&stf_pcie_event);
if (ret)
return ret;
pm_runtime_enable(&pdev->dev);
pm_runtime_get_sync(&pdev->dev);
platform_set_drvdata(pdev, pcie);
return 0;
}
static void starfive_pcie_remove(struct platform_device *pdev)
{
struct starfive_jh7110_pcie *pcie = platform_get_drvdata(pdev);
pm_runtime_put(&pdev->dev);
pm_runtime_disable(&pdev->dev);
plda_pcie_host_deinit(&pcie->plda);
platform_set_drvdata(pdev, NULL);
}
static int starfive_pcie_suspend_noirq(struct device *dev)
{
struct starfive_jh7110_pcie *pcie = dev_get_drvdata(dev);
clk_bulk_disable_unprepare(pcie->num_clks, pcie->clks);
starfive_pcie_disable_phy(pcie);
return 0;
}
static int starfive_pcie_resume_noirq(struct device *dev)
{
struct starfive_jh7110_pcie *pcie = dev_get_drvdata(dev);
int ret;
ret = starfive_pcie_enable_phy(dev, pcie);
if (ret)
return ret;
ret = clk_bulk_prepare_enable(pcie->num_clks, pcie->clks);
if (ret) {
dev_err(dev, "failed to enable clocks\n");
starfive_pcie_disable_phy(pcie);
return ret;
}
return 0;
}
static const struct dev_pm_ops starfive_pcie_pm_ops = {
NOIRQ_SYSTEM_SLEEP_PM_OPS(starfive_pcie_suspend_noirq,
starfive_pcie_resume_noirq)
};
static const struct of_device_id starfive_pcie_of_match[] = {
{ .compatible = "starfive,jh7110-pcie", },
{ /* sentinel */ }
};
MODULE_DEVICE_TABLE(of, starfive_pcie_of_match);
static struct platform_driver starfive_pcie_driver = {
.driver = {
.name = "pcie-starfive",
.of_match_table = of_match_ptr(starfive_pcie_of_match),
.pm = pm_sleep_ptr(&starfive_pcie_pm_ops),
},
.probe = starfive_pcie_probe,
.remove_new = starfive_pcie_remove,
};
module_platform_driver(starfive_pcie_driver);
MODULE_DESCRIPTION("StarFive JH7110 PCIe host driver");
MODULE_LICENSE("GPL v2");
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment