drm/amd/display: correct eDP T9 delay

[Why]
The current end of T9 delay is relay on polling
sink status by DPCD. But the polling for sink
status change after NoVideoStream_flag set to 0.

[How]
Add function edp_add_delay_for_T9 to add T9 delay.
Move the sink status polling after blank.
Signed-off-by: Hugo Hu <hugo.hu@amd.com>
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drivers/gpu/drm/amd/display/dc/core/dc_link_hwss.c

@@ -156,6 +156,13 @@ void dp_enable_link_phy(
 	dp_receiver_power_ctrl(link, true);
 }
 
+void edp_add_delay_for_T9(struct dc_link *link)
+{
+	if (link->local_sink &&
+			link->local_sink->edid_caps.panel_patch.extra_delay_backlight_off > 0)
+		udelay(link->local_sink->edid_caps.panel_patch.extra_delay_backlight_off * 1000);
+}
+
 bool edp_receiver_ready_T9(struct dc_link *link)
 {
 	unsigned int tries = 0;
@@ -178,10 +185,6 @@ bool edp_receiver_ready_T9(struct dc_link *link)
 		} while (++tries < 50);
 	}
 
-	if (link->local_sink &&
-			link->local_sink->edid_caps.panel_patch.extra_delay_backlight_off > 0)
-		udelay(link->local_sink->edid_caps.panel_patch.extra_delay_backlight_off * 1000);
-
 	return result;
 }
 bool edp_receiver_ready_T7(struct dc_link *link)

drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c

@@ -992,8 +992,6 @@ void dce110_edp_backlight_control(
 
 	link_transmitter_control(ctx->dc_bios, &cntl);
 
-
-
 	if (enable && link->dpcd_sink_ext_caps.bits.oled)
 		msleep(OLED_POST_T7_DELAY);
 
@@ -1004,7 +1002,7 @@ void dce110_edp_backlight_control(
 
 	/*edp 1.2*/
 	if (cntl.action == TRANSMITTER_CONTROL_BACKLIGHT_OFF)
-		edp_receiver_ready_T9(link);
+		edp_add_delay_for_T9(link);
 
 	if (!enable && link->dpcd_sink_ext_caps.bits.oled)
 		msleep(OLED_PRE_T11_DELAY);
@@ -1145,12 +1143,14 @@ void dce110_blank_stream(struct pipe_ctx *pipe_ctx)
 	if (dc_is_dp_signal(pipe_ctx->stream->signal)) {
 		pipe_ctx->stream_res.stream_enc->funcs->dp_blank(pipe_ctx->stream_res.stream_enc);
 
+		if (!dc_is_embedded_signal(pipe_ctx->stream->signal)) {
 			/*
 			 * After output is idle pattern some sinks need time to recognize the stream
 			 * has changed or they enter protection state and hang.
 			 */
-		if (!dc_is_embedded_signal(pipe_ctx->stream->signal))
 			msleep(60);
+		} else if (pipe_ctx->stream->signal == SIGNAL_TYPE_EDP)
+			edp_receiver_ready_T9(link);
 	}
 
 }

drivers/gpu/drm/amd/display/dc/inc/link_hwss.h

@@ -51,6 +51,7 @@ void dp_enable_link_phy(
 	const struct dc_link_settings *link_settings);
 
 void dp_receiver_power_ctrl(struct dc_link *link, bool on);
+void edp_add_delay_for_T9(struct dc_link *link);
 bool edp_receiver_ready_T9(struct dc_link *link);
 bool edp_receiver_ready_T7(struct dc_link *link);