Commit 3a487ff7 authored by Dan Carpenter's avatar Dan Carpenter Committed by Martin K. Petersen

scsi: lpfc: Fix error codes in lpfc_sli4_pci_mem_setup()

It used to be that "error" was set to -ENODEV at the start of the function
but we shifted some code around an now "error" is set to zero for most
error paths.  There is a mix of direct returns and "goto out" but I changed
everything to direct returns for consistency.

Fixes: 56de8357 ("scsi: lpfc: fix calls to dma_set_mask_and_coherent()")
Signed-off-by: default avatarDan Carpenter <dan.carpenter@oracle.com>
Acked-by: default avatarJames Smart  <james.smart@broadcom.com>
Signed-off-by: default avatarMartin K. Petersen <martin.petersen@oracle.com>
parent a656183e
......@@ -10049,7 +10049,7 @@ lpfc_sli4_pci_mem_setup(struct lpfc_hba *phba)
{
struct pci_dev *pdev = phba->pcidev;
unsigned long bar0map_len, bar1map_len, bar2map_len;
int error = -ENODEV;
int error;
uint32_t if_type;
if (!pdev)
......@@ -10066,7 +10066,7 @@ lpfc_sli4_pci_mem_setup(struct lpfc_hba *phba)
*/
if (pci_read_config_dword(pdev, LPFC_SLI_INTF,
&phba->sli4_hba.sli_intf.word0)) {
return error;
return -ENODEV;
}
/* There is no SLI3 failback for SLI4 devices. */
......@@ -10076,7 +10076,7 @@ lpfc_sli4_pci_mem_setup(struct lpfc_hba *phba)
"2894 SLI_INTF reg contents invalid "
"sli_intf reg 0x%x\n",
phba->sli4_hba.sli_intf.word0);
return error;
return -ENODEV;
}
if_type = bf_get(lpfc_sli_intf_if_type, &phba->sli4_hba.sli_intf);
......@@ -10100,7 +10100,7 @@ lpfc_sli4_pci_mem_setup(struct lpfc_hba *phba)
dev_printk(KERN_ERR, &pdev->dev,
"ioremap failed for SLI4 PCI config "
"registers.\n");
goto out;
return -ENODEV;
}
phba->pci_bar0_memmap_p = phba->sli4_hba.conf_regs_memmap_p;
/* Set up BAR0 PCI config space register memory map */
......@@ -10111,7 +10111,7 @@ lpfc_sli4_pci_mem_setup(struct lpfc_hba *phba)
if (if_type >= LPFC_SLI_INTF_IF_TYPE_2) {
dev_printk(KERN_ERR, &pdev->dev,
"FATAL - No BAR0 mapping for SLI4, if_type 2\n");
goto out;
return -ENODEV;
}
phba->sli4_hba.conf_regs_memmap_p =
ioremap(phba->pci_bar0_map, bar0map_len);
......@@ -10119,7 +10119,7 @@ lpfc_sli4_pci_mem_setup(struct lpfc_hba *phba)
dev_printk(KERN_ERR, &pdev->dev,
"ioremap failed for SLI4 PCI config "
"registers.\n");
goto out;
return -ENODEV;
}
lpfc_sli4_bar0_register_memmap(phba, if_type);
}
......@@ -10165,6 +10165,7 @@ lpfc_sli4_pci_mem_setup(struct lpfc_hba *phba)
if (!phba->sli4_hba.drbl_regs_memmap_p) {
dev_err(&pdev->dev,
"ioremap failed for SLI4 HBA doorbell registers.\n");
error = -ENOMEM;
goto out_iounmap_conf;
}
phba->pci_bar2_memmap_p = phba->sli4_hba.drbl_regs_memmap_p;
......@@ -10214,6 +10215,7 @@ lpfc_sli4_pci_mem_setup(struct lpfc_hba *phba)
if (!phba->sli4_hba.dpp_regs_memmap_p) {
dev_err(&pdev->dev,
"ioremap failed for SLI4 HBA dpp registers.\n");
error = -ENOMEM;
goto out_iounmap_ctrl;
}
phba->pci_bar4_memmap_p = phba->sli4_hba.dpp_regs_memmap_p;
......@@ -10244,7 +10246,7 @@ lpfc_sli4_pci_mem_setup(struct lpfc_hba *phba)
iounmap(phba->sli4_hba.ctrl_regs_memmap_p);
out_iounmap_conf:
iounmap(phba->sli4_hba.conf_regs_memmap_p);
out:
return error;
}
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment