via-velocity: remove private #define

Registers and their bits from mii.h. Courtesy from ed.
Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/via-velocity.h

@@ -1240,86 +1240,16 @@ struct velocity_context {
 	u32 pattern[8];
 };
 
-
-/*
- *	MII registers.
- */
-
-
 /*
  *	Registers in the MII (offset unit is WORD)
  */
 
-#define MII_REG_BMCR        0x00	// physical address
-#define MII_REG_BMSR        0x01	//
-#define MII_REG_PHYID1      0x02	// OUI
-#define MII_REG_PHYID2      0x03	// OUI + Module ID + REV ID
-#define MII_REG_ANAR        0x04	//
-#define MII_REG_ANLPAR      0x05	//
-#define MII_REG_G1000CR     0x09	//
-#define MII_REG_G1000SR     0x0A	//
-#define MII_REG_MODCFG      0x10	//
-#define MII_REG_TCSR        0x16	//
-#define MII_REG_PLED        0x1B	//
-// NS, MYSON only
-#define MII_REG_PCR         0x17	//
-// ESI only
-#define MII_REG_PCSR        0x17	//
-#define MII_REG_AUXCR       0x1C	//
-
 // Marvell 88E1000/88E1000S
 #define MII_REG_PSCR        0x10	// PHY specific control register
 
 //
-// Bits in the BMCR register
-//
-#define BMCR_RESET          0x8000	//
-#define BMCR_LBK            0x4000	//
-#define BMCR_SPEED100       0x2000	//
-#define BMCR_AUTO           0x1000	//
-#define BMCR_PD             0x0800	//
-#define BMCR_ISO            0x0400	//
-#define BMCR_REAUTO         0x0200	//
-#define BMCR_FDX            0x0100	//
-#define BMCR_SPEED1G        0x0040	//
-//
-// Bits in the BMSR register
-//
-#define BMSR_AUTOCM         0x0020	//
-#define BMSR_LNK            0x0004	//
-
-//
-// Bits in the ANAR register
-//
-#define ANAR_ASMDIR         0x0800	// Asymmetric PAUSE support
-#define ANAR_PAUSE          0x0400	// Symmetric PAUSE Support
-#define ANAR_T4             0x0200	//
-#define ANAR_TXFD           0x0100	//
-#define ANAR_TX             0x0080	//
-#define ANAR_10FD           0x0040	//
-#define ANAR_10             0x0020	//
-//
-// Bits in the ANLPAR register
-//
-#define ANLPAR_ASMDIR       0x0800	// Asymmetric PAUSE support
-#define ANLPAR_PAUSE        0x0400	// Symmetric PAUSE Support
-#define ANLPAR_T4           0x0200	//
-#define ANLPAR_TXFD         0x0100	//
-#define ANLPAR_TX           0x0080	//
-#define ANLPAR_10FD         0x0040	//
-#define ANLPAR_10           0x0020	//
-
-//
-// Bits in the G1000CR register
-//
-#define G1000CR_1000FD      0x0200	// PHY is 1000-T Full-duplex capable
-#define G1000CR_1000        0x0100	// PHY is 1000-T Half-duplex capable
-
-//
-// Bits in the G1000SR register
+// Bits in the Silicon revision register
 //
-#define G1000SR_1000FD      0x0800	// LP PHY is 1000-T Full-duplex capable
-#define G1000SR_1000        0x0400	// LP PHY is 1000-T Half-duplex capable
 
 #define TCSR_ECHODIS        0x2000	//
 #define AUXCR_MDPPS         0x0004	//
@@ -1338,7 +1268,6 @@ struct velocity_context {
 
 #define PHYID_REV_ID_MASK   0x0000000FUL
 
-#define PHYID_GET_PHY_REV_ID(i)     ((i) & PHYID_REV_ID_MASK)
 #define PHYID_GET_PHY_ID(i)         ((i) & ~PHYID_REV_ID_MASK)
 
 #define MII_REG_BITS_ON(x,i,p) do {\
@@ -1362,8 +1291,8 @@ struct velocity_context {
 
 #define MII_GET_PHY_ID(p) ({\
     u32 id;\
-    velocity_mii_read((p),MII_REG_PHYID2,(u16 *) &id);\
-    velocity_mii_read((p),MII_REG_PHYID1,((u16 *) &id)+1);\
+    velocity_mii_read((p),MII_PHYSID2,(u16 *) &id);\
+    velocity_mii_read((p),MII_PHYSID1,((u16 *) &id)+1);\
     (id);})
 
 /*